Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 946 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/iavf/iavf_adminq.c b/drivers/net/ethernet/intel/iavf/iavf_adminq.c
new file mode 100644
index 000000000..9ffbd24d8
--- /dev/null
+++ b/drivers/net/ethernet/intel/iavf/iavf_adminq.c
@@ -0,0 +1,946 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright(c) 2013 - 2018 Intel Corporation. */
+
+#include "iavf_status.h"
+#include "iavf_type.h"
+#include "iavf_register.h"
+#include "iavf_adminq.h"
+#include "iavf_prototype.h"
+
+/**
+ *  iavf_adminq_init_regs - Initialize AdminQ registers
+ *  @hw: pointer to the hardware structure
+ *
+ *  This assumes the alloc_asq and alloc_arq functions have already been called
+ **/
+static void iavf_adminq_init_regs(struct iavf_hw *hw)
+{
+	/* set head and tail registers in our local struct */
+	hw->aq.asq.tail = IAVF_VF_ATQT1;
+	hw->aq.asq.head = IAVF_VF_ATQH1;
+	hw->aq.asq.len  = IAVF_VF_ATQLEN1;
+	hw->aq.asq.bal  = IAVF_VF_ATQBAL1;
+	hw->aq.asq.bah  = IAVF_VF_ATQBAH1;
+	hw->aq.arq.tail = IAVF_VF_ARQT1;
+	hw->aq.arq.head = IAVF_VF_ARQH1;
+	hw->aq.arq.len  = IAVF_VF_ARQLEN1;
+	hw->aq.arq.bal  = IAVF_VF_ARQBAL1;
+	hw->aq.arq.bah  = IAVF_VF_ARQBAH1;
+}
+
+/**
+ *  iavf_alloc_adminq_asq_ring - Allocate Admin Queue send rings
+ *  @hw: pointer to the hardware structure
+ **/
+static enum iavf_status iavf_alloc_adminq_asq_ring(struct iavf_hw *hw)
+{
+	enum iavf_status ret_code;
+
+	ret_code = iavf_allocate_dma_mem(hw, &hw->aq.asq.desc_buf,
+					 iavf_mem_atq_ring,
+					 (hw->aq.num_asq_entries *
+					 sizeof(struct iavf_aq_desc)),
+					 IAVF_ADMINQ_DESC_ALIGNMENT);
+	if (ret_code)
+		return ret_code;
+
+	ret_code = iavf_allocate_virt_mem(hw, &hw->aq.asq.cmd_buf,
+					  (hw->aq.num_asq_entries *
+					  sizeof(struct iavf_asq_cmd_details)));
+	if (ret_code) {
+		iavf_free_dma_mem(hw, &hw->aq.asq.desc_buf);
+		return ret_code;
+	}
+
+	return ret_code;
+}
+
+/**
+ *  iavf_alloc_adminq_arq_ring - Allocate Admin Queue receive rings
+ *  @hw: pointer to the hardware structure
+ **/
+static enum iavf_status iavf_alloc_adminq_arq_ring(struct iavf_hw *hw)
+{
+	enum iavf_status ret_code;
+
+	ret_code = iavf_allocate_dma_mem(hw, &hw->aq.arq.desc_buf,
+					 iavf_mem_arq_ring,
+					 (hw->aq.num_arq_entries *
+					 sizeof(struct iavf_aq_desc)),
+					 IAVF_ADMINQ_DESC_ALIGNMENT);
+
+	return ret_code;
+}
+
+/**
+ *  iavf_free_adminq_asq - Free Admin Queue send rings
+ *  @hw: pointer to the hardware structure
+ *
+ *  This assumes the posted send buffers have already been cleaned
+ *  and de-allocated
+ **/
+static void iavf_free_adminq_asq(struct iavf_hw *hw)
+{
+	iavf_free_dma_mem(hw, &hw->aq.asq.desc_buf);
+}
+
+/**
+ *  iavf_free_adminq_arq - Free Admin Queue receive rings
+ *  @hw: pointer to the hardware structure
+ *
+ *  This assumes the posted receive buffers have already been cleaned
+ *  and de-allocated
+ **/
+static void iavf_free_adminq_arq(struct iavf_hw *hw)
+{
+	iavf_free_dma_mem(hw, &hw->aq.arq.desc_buf);
+}
+
+/**
+ *  iavf_alloc_arq_bufs - Allocate pre-posted buffers for the receive queue
+ *  @hw: pointer to the hardware structure
+ **/
+static enum iavf_status iavf_alloc_arq_bufs(struct iavf_hw *hw)
+{
+	struct iavf_aq_desc *desc;
+	struct iavf_dma_mem *bi;
+	enum iavf_status ret_code;
+	int i;
+
+	/* We'll be allocating the buffer info memory first, then we can
+	 * allocate the mapped buffers for the event processing
+	 */
+
+	/* buffer_info structures do not need alignment */
+	ret_code = iavf_allocate_virt_mem(hw, &hw->aq.arq.dma_head,
+					  (hw->aq.num_arq_entries *
+					   sizeof(struct iavf_dma_mem)));
+	if (ret_code)
+		goto alloc_arq_bufs;
+	hw->aq.arq.r.arq_bi = (struct iavf_dma_mem *)hw->aq.arq.dma_head.va;
+
+	/* allocate the mapped buffers */
+	for (i = 0; i < hw->aq.num_arq_entries; i++) {
+		bi = &hw->aq.arq.r.arq_bi[i];
+		ret_code = iavf_allocate_dma_mem(hw, bi,
+						 iavf_mem_arq_buf,
+						 hw->aq.arq_buf_size,
+						 IAVF_ADMINQ_DESC_ALIGNMENT);
+		if (ret_code)
+			goto unwind_alloc_arq_bufs;
+
+		/* now configure the descriptors for use */
+		desc = IAVF_ADMINQ_DESC(hw->aq.arq, i);
+
+		desc->flags = cpu_to_le16(IAVF_AQ_FLAG_BUF);
+		if (hw->aq.arq_buf_size > IAVF_AQ_LARGE_BUF)
+			desc->flags |= cpu_to_le16(IAVF_AQ_FLAG_LB);
+		desc->opcode = 0;
+		/* This is in accordance with Admin queue design, there is no
+		 * register for buffer size configuration
+		 */
+		desc->datalen = cpu_to_le16((u16)bi->size);
+		desc->retval = 0;
+		desc->cookie_high = 0;
+		desc->cookie_low = 0;
+		desc->params.external.addr_high =
+			cpu_to_le32(upper_32_bits(bi->pa));
+		desc->params.external.addr_low =
+			cpu_to_le32(lower_32_bits(bi->pa));
+		desc->params.external.param0 = 0;
+		desc->params.external.param1 = 0;
+	}
+
+alloc_arq_bufs:
+	return ret_code;
+
+unwind_alloc_arq_bufs:
+	/* don't try to free the one that failed... */
+	i--;
+	for (; i >= 0; i--)
+		iavf_free_dma_mem(hw, &hw->aq.arq.r.arq_bi[i]);
+	iavf_free_virt_mem(hw, &hw->aq.arq.dma_head);
+
+	return ret_code;
+}
+
+/**
+ *  iavf_alloc_asq_bufs - Allocate empty buffer structs for the send queue
+ *  @hw: pointer to the hardware structure
+ **/
+static enum iavf_status iavf_alloc_asq_bufs(struct iavf_hw *hw)
+{
+	struct iavf_dma_mem *bi;
+	enum iavf_status ret_code;
+	int i;
+
+	/* No mapped memory needed yet, just the buffer info structures */
+	ret_code = iavf_allocate_virt_mem(hw, &hw->aq.asq.dma_head,
+					  (hw->aq.num_asq_entries *
+					   sizeof(struct iavf_dma_mem)));
+	if (ret_code)
+		goto alloc_asq_bufs;
+	hw->aq.asq.r.asq_bi = (struct iavf_dma_mem *)hw->aq.asq.dma_head.va;
+
+	/* allocate the mapped buffers */
+	for (i = 0; i < hw->aq.num_asq_entries; i++) {
+		bi = &hw->aq.asq.r.asq_bi[i];
+		ret_code = iavf_allocate_dma_mem(hw, bi,
+						 iavf_mem_asq_buf,
+						 hw->aq.asq_buf_size,
+						 IAVF_ADMINQ_DESC_ALIGNMENT);
+		if (ret_code)
+			goto unwind_alloc_asq_bufs;
+	}
+alloc_asq_bufs:
+	return ret_code;
+
+unwind_alloc_asq_bufs:
+	/* don't try to free the one that failed... */
+	i--;
+	for (; i >= 0; i--)
+		iavf_free_dma_mem(hw, &hw->aq.asq.r.asq_bi[i]);
+	iavf_free_virt_mem(hw, &hw->aq.asq.dma_head);
+
+	return ret_code;
+}
+
+/**
+ *  iavf_free_arq_bufs - Free receive queue buffer info elements
+ *  @hw: pointer to the hardware structure
+ **/
+static void iavf_free_arq_bufs(struct iavf_hw *hw)
+{
+	int i;
+
+	/* free descriptors */
+	for (i = 0; i < hw->aq.num_arq_entries; i++)
+		iavf_free_dma_mem(hw, &hw->aq.arq.r.arq_bi[i]);
+
+	/* free the descriptor memory */
+	iavf_free_dma_mem(hw, &hw->aq.arq.desc_buf);
+
+	/* free the dma header */
+	iavf_free_virt_mem(hw, &hw->aq.arq.dma_head);
+}
+
+/**
+ *  iavf_free_asq_bufs - Free send queue buffer info elements
+ *  @hw: pointer to the hardware structure
+ **/
+static void iavf_free_asq_bufs(struct iavf_hw *hw)
+{
+	int i;
+
+	/* only unmap if the address is non-NULL */
+	for (i = 0; i < hw->aq.num_asq_entries; i++)
+		if (hw->aq.asq.r.asq_bi[i].pa)
+			iavf_free_dma_mem(hw, &hw->aq.asq.r.asq_bi[i]);
+
+	/* free the buffer info list */
+	iavf_free_virt_mem(hw, &hw->aq.asq.cmd_buf);
+
+	/* free the descriptor memory */
+	iavf_free_dma_mem(hw, &hw->aq.asq.desc_buf);
+
+	/* free the dma header */
+	iavf_free_virt_mem(hw, &hw->aq.asq.dma_head);
+}
+
+/**
+ *  iavf_config_asq_regs - configure ASQ registers
+ *  @hw: pointer to the hardware structure
+ *
+ *  Configure base address and length registers for the transmit queue
+ **/
+static enum iavf_status iavf_config_asq_regs(struct iavf_hw *hw)
+{
+	enum iavf_status ret_code = 0;
+	u32 reg = 0;
+
+	/* Clear Head and Tail */
+	wr32(hw, hw->aq.asq.head, 0);
+	wr32(hw, hw->aq.asq.tail, 0);
+
+	/* set starting point */
+	wr32(hw, hw->aq.asq.len, (hw->aq.num_asq_entries |
+				  IAVF_VF_ATQLEN1_ATQENABLE_MASK));
+	wr32(hw, hw->aq.asq.bal, lower_32_bits(hw->aq.asq.desc_buf.pa));
+	wr32(hw, hw->aq.asq.bah, upper_32_bits(hw->aq.asq.desc_buf.pa));
+
+	/* Check one register to verify that config was applied */
+	reg = rd32(hw, hw->aq.asq.bal);
+	if (reg != lower_32_bits(hw->aq.asq.desc_buf.pa))
+		ret_code = IAVF_ERR_ADMIN_QUEUE_ERROR;
+
+	return ret_code;
+}
+
+/**
+ *  iavf_config_arq_regs - ARQ register configuration
+ *  @hw: pointer to the hardware structure
+ *
+ * Configure base address and length registers for the receive (event queue)
+ **/
+static enum iavf_status iavf_config_arq_regs(struct iavf_hw *hw)
+{
+	enum iavf_status ret_code = 0;
+	u32 reg = 0;
+
+	/* Clear Head and Tail */
+	wr32(hw, hw->aq.arq.head, 0);
+	wr32(hw, hw->aq.arq.tail, 0);
+
+	/* set starting point */
+	wr32(hw, hw->aq.arq.len, (hw->aq.num_arq_entries |
+				  IAVF_VF_ARQLEN1_ARQENABLE_MASK));
+	wr32(hw, hw->aq.arq.bal, lower_32_bits(hw->aq.arq.desc_buf.pa));
+	wr32(hw, hw->aq.arq.bah, upper_32_bits(hw->aq.arq.desc_buf.pa));
+
+	/* Update tail in the HW to post pre-allocated buffers */
+	wr32(hw, hw->aq.arq.tail, hw->aq.num_arq_entries - 1);
+
+	/* Check one register to verify that config was applied */
+	reg = rd32(hw, hw->aq.arq.bal);
+	if (reg != lower_32_bits(hw->aq.arq.desc_buf.pa))
+		ret_code = IAVF_ERR_ADMIN_QUEUE_ERROR;
+
+	return ret_code;
+}
+
+/**
+ *  iavf_init_asq - main initialization routine for ASQ
+ *  @hw: pointer to the hardware structure
+ *
+ *  This is the main initialization routine for the Admin Send Queue
+ *  Prior to calling this function, drivers *MUST* set the following fields
+ *  in the hw->aq structure:
+ *     - hw->aq.num_asq_entries
+ *     - hw->aq.arq_buf_size
+ *
+ *  Do *NOT* hold the lock when calling this as the memory allocation routines
+ *  called are not going to be atomic context safe
+ **/
+static enum iavf_status iavf_init_asq(struct iavf_hw *hw)
+{
+	enum iavf_status ret_code = 0;
+	int i;
+
+	if (hw->aq.asq.count > 0) {
+		/* queue already initialized */
+		ret_code = IAVF_ERR_NOT_READY;
+		goto init_adminq_exit;
+	}
+
+	/* verify input for valid configuration */
+	if ((hw->aq.num_asq_entries == 0) ||
+	    (hw->aq.asq_buf_size == 0)) {
+		ret_code = IAVF_ERR_CONFIG;
+		goto init_adminq_exit;
+	}
+
+	hw->aq.asq.next_to_use = 0;
+	hw->aq.asq.next_to_clean = 0;
+
+	/* allocate the ring memory */
+	ret_code = iavf_alloc_adminq_asq_ring(hw);
+	if (ret_code)
+		goto init_adminq_exit;
+
+	/* allocate buffers in the rings */
+	ret_code = iavf_alloc_asq_bufs(hw);
+	if (ret_code)
+		goto init_adminq_free_rings;
+
+	/* initialize base registers */
+	ret_code = iavf_config_asq_regs(hw);
+	if (ret_code)
+		goto init_free_asq_bufs;
+
+	/* success! */
+	hw->aq.asq.count = hw->aq.num_asq_entries;
+	goto init_adminq_exit;
+
+init_free_asq_bufs:
+	for (i = 0; i < hw->aq.num_asq_entries; i++)
+		iavf_free_dma_mem(hw, &hw->aq.asq.r.asq_bi[i]);
+	iavf_free_virt_mem(hw, &hw->aq.asq.dma_head);
+
+init_adminq_free_rings:
+	iavf_free_adminq_asq(hw);
+
+init_adminq_exit:
+	return ret_code;
+}
+
+/**
+ *  iavf_init_arq - initialize ARQ
+ *  @hw: pointer to the hardware structure
+ *
+ *  The main initialization routine for the Admin Receive (Event) Queue.
+ *  Prior to calling this function, drivers *MUST* set the following fields
+ *  in the hw->aq structure:
+ *     - hw->aq.num_asq_entries
+ *     - hw->aq.arq_buf_size
+ *
+ *  Do *NOT* hold the lock when calling this as the memory allocation routines
+ *  called are not going to be atomic context safe
+ **/
+static enum iavf_status iavf_init_arq(struct iavf_hw *hw)
+{
+	enum iavf_status ret_code = 0;
+	int i;
+
+	if (hw->aq.arq.count > 0) {
+		/* queue already initialized */
+		ret_code = IAVF_ERR_NOT_READY;
+		goto init_adminq_exit;
+	}
+
+	/* verify input for valid configuration */
+	if ((hw->aq.num_arq_entries == 0) ||
+	    (hw->aq.arq_buf_size == 0)) {
+		ret_code = IAVF_ERR_CONFIG;
+		goto init_adminq_exit;
+	}
+
+	hw->aq.arq.next_to_use = 0;
+	hw->aq.arq.next_to_clean = 0;
+
+	/* allocate the ring memory */
+	ret_code = iavf_alloc_adminq_arq_ring(hw);
+	if (ret_code)
+		goto init_adminq_exit;
+
+	/* allocate buffers in the rings */
+	ret_code = iavf_alloc_arq_bufs(hw);
+	if (ret_code)
+		goto init_adminq_free_rings;
+
+	/* initialize base registers */
+	ret_code = iavf_config_arq_regs(hw);
+	if (ret_code)
+		goto init_free_arq_bufs;
+
+	/* success! */
+	hw->aq.arq.count = hw->aq.num_arq_entries;
+	goto init_adminq_exit;
+
+init_free_arq_bufs:
+	for (i = 0; i < hw->aq.num_arq_entries; i++)
+		iavf_free_dma_mem(hw, &hw->aq.arq.r.arq_bi[i]);
+	iavf_free_virt_mem(hw, &hw->aq.arq.dma_head);
+init_adminq_free_rings:
+	iavf_free_adminq_arq(hw);
+
+init_adminq_exit:
+	return ret_code;
+}
+
+/**
+ *  iavf_shutdown_asq - shutdown the ASQ
+ *  @hw: pointer to the hardware structure
+ *
+ *  The main shutdown routine for the Admin Send Queue
+ **/
+static enum iavf_status iavf_shutdown_asq(struct iavf_hw *hw)
+{
+	enum iavf_status ret_code = 0;
+
+	mutex_lock(&hw->aq.asq_mutex);
+
+	if (hw->aq.asq.count == 0) {
+		ret_code = IAVF_ERR_NOT_READY;
+		goto shutdown_asq_out;
+	}
+
+	/* Stop firmware AdminQ processing */
+	wr32(hw, hw->aq.asq.head, 0);
+	wr32(hw, hw->aq.asq.tail, 0);
+	wr32(hw, hw->aq.asq.len, 0);
+	wr32(hw, hw->aq.asq.bal, 0);
+	wr32(hw, hw->aq.asq.bah, 0);
+
+	hw->aq.asq.count = 0; /* to indicate uninitialized queue */
+
+	/* free ring buffers */
+	iavf_free_asq_bufs(hw);
+
+shutdown_asq_out:
+	mutex_unlock(&hw->aq.asq_mutex);
+	return ret_code;
+}
+
+/**
+ *  iavf_shutdown_arq - shutdown ARQ
+ *  @hw: pointer to the hardware structure
+ *
+ *  The main shutdown routine for the Admin Receive Queue
+ **/
+static enum iavf_status iavf_shutdown_arq(struct iavf_hw *hw)
+{
+	enum iavf_status ret_code = 0;
+
+	mutex_lock(&hw->aq.arq_mutex);
+
+	if (hw->aq.arq.count == 0) {
+		ret_code = IAVF_ERR_NOT_READY;
+		goto shutdown_arq_out;
+	}
+
+	/* Stop firmware AdminQ processing */
+	wr32(hw, hw->aq.arq.head, 0);
+	wr32(hw, hw->aq.arq.tail, 0);
+	wr32(hw, hw->aq.arq.len, 0);
+	wr32(hw, hw->aq.arq.bal, 0);
+	wr32(hw, hw->aq.arq.bah, 0);
+
+	hw->aq.arq.count = 0; /* to indicate uninitialized queue */
+
+	/* free ring buffers */
+	iavf_free_arq_bufs(hw);
+
+shutdown_arq_out:
+	mutex_unlock(&hw->aq.arq_mutex);
+	return ret_code;
+}
+
+/**
+ *  iavf_init_adminq - main initialization routine for Admin Queue
+ *  @hw: pointer to the hardware structure
+ *
+ *  Prior to calling this function, drivers *MUST* set the following fields
+ *  in the hw->aq structure:
+ *     - hw->aq.num_asq_entries
+ *     - hw->aq.num_arq_entries
+ *     - hw->aq.arq_buf_size
+ *     - hw->aq.asq_buf_size
+ **/
+enum iavf_status iavf_init_adminq(struct iavf_hw *hw)
+{
+	enum iavf_status ret_code;
+
+	/* verify input for valid configuration */
+	if ((hw->aq.num_arq_entries == 0) ||
+	    (hw->aq.num_asq_entries == 0) ||
+	    (hw->aq.arq_buf_size == 0) ||
+	    (hw->aq.asq_buf_size == 0)) {
+		ret_code = IAVF_ERR_CONFIG;
+		goto init_adminq_exit;
+	}
+
+	/* Set up register offsets */
+	iavf_adminq_init_regs(hw);
+
+	/* setup ASQ command write back timeout */
+	hw->aq.asq_cmd_timeout = IAVF_ASQ_CMD_TIMEOUT;
+
+	/* allocate the ASQ */
+	ret_code = iavf_init_asq(hw);
+	if (ret_code)
+		goto init_adminq_destroy_locks;
+
+	/* allocate the ARQ */
+	ret_code = iavf_init_arq(hw);
+	if (ret_code)
+		goto init_adminq_free_asq;
+
+	/* success! */
+	goto init_adminq_exit;
+
+init_adminq_free_asq:
+	iavf_shutdown_asq(hw);
+init_adminq_destroy_locks:
+
+init_adminq_exit:
+	return ret_code;
+}
+
+/**
+ *  iavf_shutdown_adminq - shutdown routine for the Admin Queue
+ *  @hw: pointer to the hardware structure
+ **/
+enum iavf_status iavf_shutdown_adminq(struct iavf_hw *hw)
+{
+	if (iavf_check_asq_alive(hw))
+		iavf_aq_queue_shutdown(hw, true);
+
+	iavf_shutdown_asq(hw);
+	iavf_shutdown_arq(hw);
+
+	return 0;
+}
+
+/**
+ *  iavf_clean_asq - cleans Admin send queue
+ *  @hw: pointer to the hardware structure
+ *
+ *  returns the number of free desc
+ **/
+static u16 iavf_clean_asq(struct iavf_hw *hw)
+{
+	struct iavf_adminq_ring *asq = &hw->aq.asq;
+	struct iavf_asq_cmd_details *details;
+	u16 ntc = asq->next_to_clean;
+	struct iavf_aq_desc desc_cb;
+	struct iavf_aq_desc *desc;
+
+	desc = IAVF_ADMINQ_DESC(*asq, ntc);
+	details = IAVF_ADMINQ_DETAILS(*asq, ntc);
+	while (rd32(hw, hw->aq.asq.head) != ntc) {
+		iavf_debug(hw, IAVF_DEBUG_AQ_MESSAGE,
+			   "ntc %d head %d.\n", ntc, rd32(hw, hw->aq.asq.head));
+
+		if (details->callback) {
+			IAVF_ADMINQ_CALLBACK cb_func =
+					(IAVF_ADMINQ_CALLBACK)details->callback;
+			desc_cb = *desc;
+			cb_func(hw, &desc_cb);
+		}
+		memset((void *)desc, 0, sizeof(struct iavf_aq_desc));
+		memset((void *)details, 0,
+		       sizeof(struct iavf_asq_cmd_details));
+		ntc++;
+		if (ntc == asq->count)
+			ntc = 0;
+		desc = IAVF_ADMINQ_DESC(*asq, ntc);
+		details = IAVF_ADMINQ_DETAILS(*asq, ntc);
+	}
+
+	asq->next_to_clean = ntc;
+
+	return IAVF_DESC_UNUSED(asq);
+}
+
+/**
+ *  iavf_asq_done - check if FW has processed the Admin Send Queue
+ *  @hw: pointer to the hw struct
+ *
+ *  Returns true if the firmware has processed all descriptors on the
+ *  admin send queue. Returns false if there are still requests pending.
+ **/
+bool iavf_asq_done(struct iavf_hw *hw)
+{
+	/* AQ designers suggest use of head for better
+	 * timing reliability than DD bit
+	 */
+	return rd32(hw, hw->aq.asq.head) == hw->aq.asq.next_to_use;
+}
+
+/**
+ *  iavf_asq_send_command - send command to Admin Queue
+ *  @hw: pointer to the hw struct
+ *  @desc: prefilled descriptor describing the command (non DMA mem)
+ *  @buff: buffer to use for indirect commands
+ *  @buff_size: size of buffer for indirect commands
+ *  @cmd_details: pointer to command details structure
+ *
+ *  This is the main send command driver routine for the Admin Queue send
+ *  queue.  It runs the queue, cleans the queue, etc
+ **/
+enum iavf_status iavf_asq_send_command(struct iavf_hw *hw,
+				       struct iavf_aq_desc *desc,
+				       void *buff, /* can be NULL */
+				       u16  buff_size,
+				       struct iavf_asq_cmd_details *cmd_details)
+{
+	struct iavf_dma_mem *dma_buff = NULL;
+	struct iavf_asq_cmd_details *details;
+	struct iavf_aq_desc *desc_on_ring;
+	bool cmd_completed = false;
+	enum iavf_status status = 0;
+	u16  retval = 0;
+	u32  val = 0;
+
+	mutex_lock(&hw->aq.asq_mutex);
+
+	if (hw->aq.asq.count == 0) {
+		iavf_debug(hw, IAVF_DEBUG_AQ_MESSAGE,
+			   "AQTX: Admin queue not initialized.\n");
+		status = IAVF_ERR_QUEUE_EMPTY;
+		goto asq_send_command_error;
+	}
+
+	hw->aq.asq_last_status = IAVF_AQ_RC_OK;
+
+	val = rd32(hw, hw->aq.asq.head);
+	if (val >= hw->aq.num_asq_entries) {
+		iavf_debug(hw, IAVF_DEBUG_AQ_MESSAGE,
+			   "AQTX: head overrun at %d\n", val);
+		status = IAVF_ERR_QUEUE_EMPTY;
+		goto asq_send_command_error;
+	}
+
+	details = IAVF_ADMINQ_DETAILS(hw->aq.asq, hw->aq.asq.next_to_use);
+	if (cmd_details) {
+		*details = *cmd_details;
+
+		/* If the cmd_details are defined copy the cookie.  The
+		 * cpu_to_le32 is not needed here because the data is ignored
+		 * by the FW, only used by the driver
+		 */
+		if (details->cookie) {
+			desc->cookie_high =
+				cpu_to_le32(upper_32_bits(details->cookie));
+			desc->cookie_low =
+				cpu_to_le32(lower_32_bits(details->cookie));
+		}
+	} else {
+		memset(details, 0, sizeof(struct iavf_asq_cmd_details));
+	}
+
+	/* clear requested flags and then set additional flags if defined */
+	desc->flags &= ~cpu_to_le16(details->flags_dis);
+	desc->flags |= cpu_to_le16(details->flags_ena);
+
+	if (buff_size > hw->aq.asq_buf_size) {
+		iavf_debug(hw,
+			   IAVF_DEBUG_AQ_MESSAGE,
+			   "AQTX: Invalid buffer size: %d.\n",
+			   buff_size);
+		status = IAVF_ERR_INVALID_SIZE;
+		goto asq_send_command_error;
+	}
+
+	if (details->postpone && !details->async) {
+		iavf_debug(hw,
+			   IAVF_DEBUG_AQ_MESSAGE,
+			   "AQTX: Async flag not set along with postpone flag");
+		status = IAVF_ERR_PARAM;
+		goto asq_send_command_error;
+	}
+
+	/* call clean and check queue available function to reclaim the
+	 * descriptors that were processed by FW, the function returns the
+	 * number of desc available
+	 */
+	/* the clean function called here could be called in a separate thread
+	 * in case of asynchronous completions
+	 */
+	if (iavf_clean_asq(hw) == 0) {
+		iavf_debug(hw,
+			   IAVF_DEBUG_AQ_MESSAGE,
+			   "AQTX: Error queue is full.\n");
+		status = IAVF_ERR_ADMIN_QUEUE_FULL;
+		goto asq_send_command_error;
+	}
+
+	/* initialize the temp desc pointer with the right desc */
+	desc_on_ring = IAVF_ADMINQ_DESC(hw->aq.asq, hw->aq.asq.next_to_use);
+
+	/* if the desc is available copy the temp desc to the right place */
+	*desc_on_ring = *desc;
+
+	/* if buff is not NULL assume indirect command */
+	if (buff) {
+		dma_buff = &hw->aq.asq.r.asq_bi[hw->aq.asq.next_to_use];
+		/* copy the user buff into the respective DMA buff */
+		memcpy(dma_buff->va, buff, buff_size);
+		desc_on_ring->datalen = cpu_to_le16(buff_size);
+
+		/* Update the address values in the desc with the pa value
+		 * for respective buffer
+		 */
+		desc_on_ring->params.external.addr_high =
+				cpu_to_le32(upper_32_bits(dma_buff->pa));
+		desc_on_ring->params.external.addr_low =
+				cpu_to_le32(lower_32_bits(dma_buff->pa));
+	}
+
+	/* bump the tail */
+	iavf_debug(hw, IAVF_DEBUG_AQ_MESSAGE, "AQTX: desc and buffer:\n");
+	iavf_debug_aq(hw, IAVF_DEBUG_AQ_COMMAND, (void *)desc_on_ring,
+		      buff, buff_size);
+	(hw->aq.asq.next_to_use)++;
+	if (hw->aq.asq.next_to_use == hw->aq.asq.count)
+		hw->aq.asq.next_to_use = 0;
+	if (!details->postpone)
+		wr32(hw, hw->aq.asq.tail, hw->aq.asq.next_to_use);
+
+	/* if cmd_details are not defined or async flag is not set,
+	 * we need to wait for desc write back
+	 */
+	if (!details->async && !details->postpone) {
+		u32 total_delay = 0;
+
+		do {
+			/* AQ designers suggest use of head for better
+			 * timing reliability than DD bit
+			 */
+			if (iavf_asq_done(hw))
+				break;
+			udelay(50);
+			total_delay += 50;
+		} while (total_delay < hw->aq.asq_cmd_timeout);
+	}
+
+	/* if ready, copy the desc back to temp */
+	if (iavf_asq_done(hw)) {
+		*desc = *desc_on_ring;
+		if (buff)
+			memcpy(buff, dma_buff->va, buff_size);
+		retval = le16_to_cpu(desc->retval);
+		if (retval != 0) {
+			iavf_debug(hw,
+				   IAVF_DEBUG_AQ_MESSAGE,
+				   "AQTX: Command completed with error 0x%X.\n",
+				   retval);
+
+			/* strip off FW internal code */
+			retval &= 0xff;
+		}
+		cmd_completed = true;
+		if ((enum iavf_admin_queue_err)retval == IAVF_AQ_RC_OK)
+			status = 0;
+		else if ((enum iavf_admin_queue_err)retval == IAVF_AQ_RC_EBUSY)
+			status = IAVF_ERR_NOT_READY;
+		else
+			status = IAVF_ERR_ADMIN_QUEUE_ERROR;
+		hw->aq.asq_last_status = (enum iavf_admin_queue_err)retval;
+	}
+
+	iavf_debug(hw, IAVF_DEBUG_AQ_MESSAGE,
+		   "AQTX: desc and buffer writeback:\n");
+	iavf_debug_aq(hw, IAVF_DEBUG_AQ_COMMAND, (void *)desc, buff, buff_size);
+
+	/* save writeback aq if requested */
+	if (details->wb_desc)
+		*details->wb_desc = *desc_on_ring;
+
+	/* update the error if time out occurred */
+	if ((!cmd_completed) &&
+	    (!details->async && !details->postpone)) {
+		if (rd32(hw, hw->aq.asq.len) & IAVF_VF_ATQLEN1_ATQCRIT_MASK) {
+			iavf_debug(hw, IAVF_DEBUG_AQ_MESSAGE,
+				   "AQTX: AQ Critical error.\n");
+			status = IAVF_ERR_ADMIN_QUEUE_CRITICAL_ERROR;
+		} else {
+			iavf_debug(hw, IAVF_DEBUG_AQ_MESSAGE,
+				   "AQTX: Writeback timeout.\n");
+			status = IAVF_ERR_ADMIN_QUEUE_TIMEOUT;
+		}
+	}
+
+asq_send_command_error:
+	mutex_unlock(&hw->aq.asq_mutex);
+	return status;
+}
+
+/**
+ *  iavf_fill_default_direct_cmd_desc - AQ descriptor helper function
+ *  @desc:     pointer to the temp descriptor (non DMA mem)
+ *  @opcode:   the opcode can be used to decide which flags to turn off or on
+ *
+ *  Fill the desc with default values
+ **/
+void iavf_fill_default_direct_cmd_desc(struct iavf_aq_desc *desc, u16 opcode)
+{
+	/* zero out the desc */
+	memset((void *)desc, 0, sizeof(struct iavf_aq_desc));
+	desc->opcode = cpu_to_le16(opcode);
+	desc->flags = cpu_to_le16(IAVF_AQ_FLAG_SI);
+}
+
+/**
+ *  iavf_clean_arq_element
+ *  @hw: pointer to the hw struct
+ *  @e: event info from the receive descriptor, includes any buffers
+ *  @pending: number of events that could be left to process
+ *
+ *  This function cleans one Admin Receive Queue element and returns
+ *  the contents through e.  It can also return how many events are
+ *  left to process through 'pending'
+ **/
+enum iavf_status iavf_clean_arq_element(struct iavf_hw *hw,
+					struct iavf_arq_event_info *e,
+					u16 *pending)
+{
+	u16 ntc = hw->aq.arq.next_to_clean;
+	struct iavf_aq_desc *desc;
+	enum iavf_status ret_code = 0;
+	struct iavf_dma_mem *bi;
+	u16 desc_idx;
+	u16 datalen;
+	u16 flags;
+	u16 ntu;
+
+	/* pre-clean the event info */
+	memset(&e->desc, 0, sizeof(e->desc));
+
+	/* take the lock before we start messing with the ring */
+	mutex_lock(&hw->aq.arq_mutex);
+
+	if (hw->aq.arq.count == 0) {
+		iavf_debug(hw, IAVF_DEBUG_AQ_MESSAGE,
+			   "AQRX: Admin queue not initialized.\n");
+		ret_code = IAVF_ERR_QUEUE_EMPTY;
+		goto clean_arq_element_err;
+	}
+
+	/* set next_to_use to head */
+	ntu = rd32(hw, hw->aq.arq.head) & IAVF_VF_ARQH1_ARQH_MASK;
+	if (ntu == ntc) {
+		/* nothing to do - shouldn't need to update ring's values */
+		ret_code = IAVF_ERR_ADMIN_QUEUE_NO_WORK;
+		goto clean_arq_element_out;
+	}
+
+	/* now clean the next descriptor */
+	desc = IAVF_ADMINQ_DESC(hw->aq.arq, ntc);
+	desc_idx = ntc;
+
+	hw->aq.arq_last_status =
+		(enum iavf_admin_queue_err)le16_to_cpu(desc->retval);
+	flags = le16_to_cpu(desc->flags);
+	if (flags & IAVF_AQ_FLAG_ERR) {
+		ret_code = IAVF_ERR_ADMIN_QUEUE_ERROR;
+		iavf_debug(hw,
+			   IAVF_DEBUG_AQ_MESSAGE,
+			   "AQRX: Event received with error 0x%X.\n",
+			   hw->aq.arq_last_status);
+	}
+
+	e->desc = *desc;
+	datalen = le16_to_cpu(desc->datalen);
+	e->msg_len = min(datalen, e->buf_len);
+	if (e->msg_buf && (e->msg_len != 0))
+		memcpy(e->msg_buf, hw->aq.arq.r.arq_bi[desc_idx].va,
+		       e->msg_len);
+
+	iavf_debug(hw, IAVF_DEBUG_AQ_MESSAGE, "AQRX: desc and buffer:\n");
+	iavf_debug_aq(hw, IAVF_DEBUG_AQ_COMMAND, (void *)desc, e->msg_buf,
+		      hw->aq.arq_buf_size);
+
+	/* Restore the original datalen and buffer address in the desc,
+	 * FW updates datalen to indicate the event message
+	 * size
+	 */
+	bi = &hw->aq.arq.r.arq_bi[ntc];
+	memset((void *)desc, 0, sizeof(struct iavf_aq_desc));
+
+	desc->flags = cpu_to_le16(IAVF_AQ_FLAG_BUF);
+	if (hw->aq.arq_buf_size > IAVF_AQ_LARGE_BUF)
+		desc->flags |= cpu_to_le16(IAVF_AQ_FLAG_LB);
+	desc->datalen = cpu_to_le16((u16)bi->size);
+	desc->params.external.addr_high = cpu_to_le32(upper_32_bits(bi->pa));
+	desc->params.external.addr_low = cpu_to_le32(lower_32_bits(bi->pa));
+
+	/* set tail = the last cleaned desc index. */
+	wr32(hw, hw->aq.arq.tail, ntc);
+	/* ntc is updated to tail + 1 */
+	ntc++;
+	if (ntc == hw->aq.num_arq_entries)
+		ntc = 0;
+	hw->aq.arq.next_to_clean = ntc;
+	hw->aq.arq.next_to_use = ntu;
+
+clean_arq_element_out:
+	/* Set pending if needed, unlock and return */
+	if (pending)
+		*pending = (ntc > ntu ? hw->aq.arq.count : 0) + (ntu - ntc);
+
+clean_arq_element_err:
+	mutex_unlock(&hw->aq.arq_mutex);
+
+	return ret_code;
+}