Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1021 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/ice/ice_base.c b/drivers/net/ethernet/intel/ice/ice_base.c
new file mode 100644
index 000000000..1911d644d
--- /dev/null
+++ b/drivers/net/ethernet/intel/ice/ice_base.c
@@ -0,0 +1,1021 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019, Intel Corporation. */
+
+#include <net/xdp_sock_drv.h>
+#include "ice_base.h"
+#include "ice_lib.h"
+#include "ice_dcb_lib.h"
+#include "ice_sriov.h"
+
+/**
+ * __ice_vsi_get_qs_contig - Assign a contiguous chunk of queues to VSI
+ * @qs_cfg: gathered variables needed for PF->VSI queues assignment
+ *
+ * Return 0 on success and -ENOMEM in case of no left space in PF queue bitmap
+ */
+static int __ice_vsi_get_qs_contig(struct ice_qs_cfg *qs_cfg)
+{
+	unsigned int offset, i;
+
+	mutex_lock(qs_cfg->qs_mutex);
+	offset = bitmap_find_next_zero_area(qs_cfg->pf_map, qs_cfg->pf_map_size,
+					    0, qs_cfg->q_count, 0);
+	if (offset >= qs_cfg->pf_map_size) {
+		mutex_unlock(qs_cfg->qs_mutex);
+		return -ENOMEM;
+	}
+
+	bitmap_set(qs_cfg->pf_map, offset, qs_cfg->q_count);
+	for (i = 0; i < qs_cfg->q_count; i++)
+		qs_cfg->vsi_map[i + qs_cfg->vsi_map_offset] = (u16)(i + offset);
+	mutex_unlock(qs_cfg->qs_mutex);
+
+	return 0;
+}
+
+/**
+ * __ice_vsi_get_qs_sc - Assign a scattered queues from PF to VSI
+ * @qs_cfg: gathered variables needed for pf->vsi queues assignment
+ *
+ * Return 0 on success and -ENOMEM in case of no left space in PF queue bitmap
+ */
+static int __ice_vsi_get_qs_sc(struct ice_qs_cfg *qs_cfg)
+{
+	unsigned int i, index = 0;
+
+	mutex_lock(qs_cfg->qs_mutex);
+	for (i = 0; i < qs_cfg->q_count; i++) {
+		index = find_next_zero_bit(qs_cfg->pf_map,
+					   qs_cfg->pf_map_size, index);
+		if (index >= qs_cfg->pf_map_size)
+			goto err_scatter;
+		set_bit(index, qs_cfg->pf_map);
+		qs_cfg->vsi_map[i + qs_cfg->vsi_map_offset] = (u16)index;
+	}
+	mutex_unlock(qs_cfg->qs_mutex);
+
+	return 0;
+err_scatter:
+	for (index = 0; index < i; index++) {
+		clear_bit(qs_cfg->vsi_map[index], qs_cfg->pf_map);
+		qs_cfg->vsi_map[index + qs_cfg->vsi_map_offset] = 0;
+	}
+	mutex_unlock(qs_cfg->qs_mutex);
+
+	return -ENOMEM;
+}
+
+/**
+ * ice_pf_rxq_wait - Wait for a PF's Rx queue to be enabled or disabled
+ * @pf: the PF being configured
+ * @pf_q: the PF queue
+ * @ena: enable or disable state of the queue
+ *
+ * This routine will wait for the given Rx queue of the PF to reach the
+ * enabled or disabled state.
+ * Returns -ETIMEDOUT in case of failing to reach the requested state after
+ * multiple retries; else will return 0 in case of success.
+ */
+static int ice_pf_rxq_wait(struct ice_pf *pf, int pf_q, bool ena)
+{
+	int i;
+
+	for (i = 0; i < ICE_Q_WAIT_MAX_RETRY; i++) {
+		if (ena == !!(rd32(&pf->hw, QRX_CTRL(pf_q)) &
+			      QRX_CTRL_QENA_STAT_M))
+			return 0;
+
+		usleep_range(20, 40);
+	}
+
+	return -ETIMEDOUT;
+}
+
+/**
+ * ice_vsi_alloc_q_vector - Allocate memory for a single interrupt vector
+ * @vsi: the VSI being configured
+ * @v_idx: index of the vector in the VSI struct
+ *
+ * We allocate one q_vector and set default value for ITR setting associated
+ * with this q_vector. If allocation fails we return -ENOMEM.
+ */
+static int ice_vsi_alloc_q_vector(struct ice_vsi *vsi, u16 v_idx)
+{
+	struct ice_pf *pf = vsi->back;
+	struct ice_q_vector *q_vector;
+
+	/* allocate q_vector */
+	q_vector = devm_kzalloc(ice_pf_to_dev(pf), sizeof(*q_vector),
+				GFP_KERNEL);
+	if (!q_vector)
+		return -ENOMEM;
+
+	q_vector->vsi = vsi;
+	q_vector->v_idx = v_idx;
+	q_vector->tx.itr_setting = ICE_DFLT_TX_ITR;
+	q_vector->rx.itr_setting = ICE_DFLT_RX_ITR;
+	q_vector->tx.itr_mode = ITR_DYNAMIC;
+	q_vector->rx.itr_mode = ITR_DYNAMIC;
+	q_vector->tx.type = ICE_TX_CONTAINER;
+	q_vector->rx.type = ICE_RX_CONTAINER;
+
+	if (vsi->type == ICE_VSI_VF)
+		goto out;
+	/* only set affinity_mask if the CPU is online */
+	if (cpu_online(v_idx))
+		cpumask_set_cpu(v_idx, &q_vector->affinity_mask);
+
+	/* This will not be called in the driver load path because the netdev
+	 * will not be created yet. All other cases with register the NAPI
+	 * handler here (i.e. resume, reset/rebuild, etc.)
+	 */
+	if (vsi->netdev)
+		netif_napi_add(vsi->netdev, &q_vector->napi, ice_napi_poll);
+
+out:
+	/* tie q_vector and VSI together */
+	vsi->q_vectors[v_idx] = q_vector;
+
+	return 0;
+}
+
+/**
+ * ice_free_q_vector - Free memory allocated for a specific interrupt vector
+ * @vsi: VSI having the memory freed
+ * @v_idx: index of the vector to be freed
+ */
+static void ice_free_q_vector(struct ice_vsi *vsi, int v_idx)
+{
+	struct ice_q_vector *q_vector;
+	struct ice_pf *pf = vsi->back;
+	struct ice_tx_ring *tx_ring;
+	struct ice_rx_ring *rx_ring;
+	struct device *dev;
+
+	dev = ice_pf_to_dev(pf);
+	if (!vsi->q_vectors[v_idx]) {
+		dev_dbg(dev, "Queue vector at index %d not found\n", v_idx);
+		return;
+	}
+	q_vector = vsi->q_vectors[v_idx];
+
+	ice_for_each_tx_ring(tx_ring, q_vector->tx)
+		tx_ring->q_vector = NULL;
+	ice_for_each_rx_ring(rx_ring, q_vector->rx)
+		rx_ring->q_vector = NULL;
+
+	/* only VSI with an associated netdev is set up with NAPI */
+	if (vsi->netdev)
+		netif_napi_del(&q_vector->napi);
+
+	devm_kfree(dev, q_vector);
+	vsi->q_vectors[v_idx] = NULL;
+}
+
+/**
+ * ice_cfg_itr_gran - set the ITR granularity to 2 usecs if not already set
+ * @hw: board specific structure
+ */
+static void ice_cfg_itr_gran(struct ice_hw *hw)
+{
+	u32 regval = rd32(hw, GLINT_CTL);
+
+	/* no need to update global register if ITR gran is already set */
+	if (!(regval & GLINT_CTL_DIS_AUTOMASK_M) &&
+	    (((regval & GLINT_CTL_ITR_GRAN_200_M) >>
+	     GLINT_CTL_ITR_GRAN_200_S) == ICE_ITR_GRAN_US) &&
+	    (((regval & GLINT_CTL_ITR_GRAN_100_M) >>
+	     GLINT_CTL_ITR_GRAN_100_S) == ICE_ITR_GRAN_US) &&
+	    (((regval & GLINT_CTL_ITR_GRAN_50_M) >>
+	     GLINT_CTL_ITR_GRAN_50_S) == ICE_ITR_GRAN_US) &&
+	    (((regval & GLINT_CTL_ITR_GRAN_25_M) >>
+	      GLINT_CTL_ITR_GRAN_25_S) == ICE_ITR_GRAN_US))
+		return;
+
+	regval = ((ICE_ITR_GRAN_US << GLINT_CTL_ITR_GRAN_200_S) &
+		  GLINT_CTL_ITR_GRAN_200_M) |
+		 ((ICE_ITR_GRAN_US << GLINT_CTL_ITR_GRAN_100_S) &
+		  GLINT_CTL_ITR_GRAN_100_M) |
+		 ((ICE_ITR_GRAN_US << GLINT_CTL_ITR_GRAN_50_S) &
+		  GLINT_CTL_ITR_GRAN_50_M) |
+		 ((ICE_ITR_GRAN_US << GLINT_CTL_ITR_GRAN_25_S) &
+		  GLINT_CTL_ITR_GRAN_25_M);
+	wr32(hw, GLINT_CTL, regval);
+}
+
+/**
+ * ice_calc_txq_handle - calculate the queue handle
+ * @vsi: VSI that ring belongs to
+ * @ring: ring to get the absolute queue index
+ * @tc: traffic class number
+ */
+static u16 ice_calc_txq_handle(struct ice_vsi *vsi, struct ice_tx_ring *ring, u8 tc)
+{
+	WARN_ONCE(ice_ring_is_xdp(ring) && tc, "XDP ring can't belong to TC other than 0\n");
+
+	if (ring->ch)
+		return ring->q_index - ring->ch->base_q;
+
+	/* Idea here for calculation is that we subtract the number of queue
+	 * count from TC that ring belongs to from it's absolute queue index
+	 * and as a result we get the queue's index within TC.
+	 */
+	return ring->q_index - vsi->tc_cfg.tc_info[tc].qoffset;
+}
+
+/**
+ * ice_eswitch_calc_txq_handle
+ * @ring: pointer to ring which unique index is needed
+ *
+ * To correctly work with many netdevs ring->q_index of Tx rings on switchdev
+ * VSI can repeat. Hardware ring setup requires unique q_index. Calculate it
+ * here by finding index in vsi->tx_rings of this ring.
+ *
+ * Return ICE_INVAL_Q_INDEX when index wasn't found. Should never happen,
+ * because VSI is get from ring->vsi, so it has to be present in this VSI.
+ */
+static u16 ice_eswitch_calc_txq_handle(struct ice_tx_ring *ring)
+{
+	struct ice_vsi *vsi = ring->vsi;
+	int i;
+
+	ice_for_each_txq(vsi, i) {
+		if (vsi->tx_rings[i] == ring)
+			return i;
+	}
+
+	return ICE_INVAL_Q_INDEX;
+}
+
+/**
+ * ice_cfg_xps_tx_ring - Configure XPS for a Tx ring
+ * @ring: The Tx ring to configure
+ *
+ * This enables/disables XPS for a given Tx descriptor ring
+ * based on the TCs enabled for the VSI that ring belongs to.
+ */
+static void ice_cfg_xps_tx_ring(struct ice_tx_ring *ring)
+{
+	if (!ring->q_vector || !ring->netdev)
+		return;
+
+	/* We only initialize XPS once, so as not to overwrite user settings */
+	if (test_and_set_bit(ICE_TX_XPS_INIT_DONE, ring->xps_state))
+		return;
+
+	netif_set_xps_queue(ring->netdev, &ring->q_vector->affinity_mask,
+			    ring->q_index);
+}
+
+/**
+ * ice_setup_tx_ctx - setup a struct ice_tlan_ctx instance
+ * @ring: The Tx ring to configure
+ * @tlan_ctx: Pointer to the Tx LAN queue context structure to be initialized
+ * @pf_q: queue index in the PF space
+ *
+ * Configure the Tx descriptor ring in TLAN context.
+ */
+static void
+ice_setup_tx_ctx(struct ice_tx_ring *ring, struct ice_tlan_ctx *tlan_ctx, u16 pf_q)
+{
+	struct ice_vsi *vsi = ring->vsi;
+	struct ice_hw *hw = &vsi->back->hw;
+
+	tlan_ctx->base = ring->dma >> ICE_TLAN_CTX_BASE_S;
+
+	tlan_ctx->port_num = vsi->port_info->lport;
+
+	/* Transmit Queue Length */
+	tlan_ctx->qlen = ring->count;
+
+	ice_set_cgd_num(tlan_ctx, ring->dcb_tc);
+
+	/* PF number */
+	tlan_ctx->pf_num = hw->pf_id;
+
+	/* queue belongs to a specific VSI type
+	 * VF / VM index should be programmed per vmvf_type setting:
+	 * for vmvf_type = VF, it is VF number between 0-256
+	 * for vmvf_type = VM, it is VM number between 0-767
+	 * for PF or EMP this field should be set to zero
+	 */
+	switch (vsi->type) {
+	case ICE_VSI_LB:
+	case ICE_VSI_CTRL:
+	case ICE_VSI_PF:
+		if (ring->ch)
+			tlan_ctx->vmvf_type = ICE_TLAN_CTX_VMVF_TYPE_VMQ;
+		else
+			tlan_ctx->vmvf_type = ICE_TLAN_CTX_VMVF_TYPE_PF;
+		break;
+	case ICE_VSI_VF:
+		/* Firmware expects vmvf_num to be absolute VF ID */
+		tlan_ctx->vmvf_num = hw->func_caps.vf_base_id + vsi->vf->vf_id;
+		tlan_ctx->vmvf_type = ICE_TLAN_CTX_VMVF_TYPE_VF;
+		break;
+	case ICE_VSI_SWITCHDEV_CTRL:
+		tlan_ctx->vmvf_type = ICE_TLAN_CTX_VMVF_TYPE_VMQ;
+		break;
+	default:
+		return;
+	}
+
+	/* make sure the context is associated with the right VSI */
+	if (ring->ch)
+		tlan_ctx->src_vsi = ring->ch->vsi_num;
+	else
+		tlan_ctx->src_vsi = ice_get_hw_vsi_num(hw, vsi->idx);
+
+	/* Restrict Tx timestamps to the PF VSI */
+	switch (vsi->type) {
+	case ICE_VSI_PF:
+		tlan_ctx->tsyn_ena = 1;
+		break;
+	default:
+		break;
+	}
+
+	tlan_ctx->tso_ena = ICE_TX_LEGACY;
+	tlan_ctx->tso_qnum = pf_q;
+
+	/* Legacy or Advanced Host Interface:
+	 * 0: Advanced Host Interface
+	 * 1: Legacy Host Interface
+	 */
+	tlan_ctx->legacy_int = ICE_TX_LEGACY;
+}
+
+/**
+ * ice_rx_offset - Return expected offset into page to access data
+ * @rx_ring: Ring we are requesting offset of
+ *
+ * Returns the offset value for ring into the data buffer.
+ */
+static unsigned int ice_rx_offset(struct ice_rx_ring *rx_ring)
+{
+	if (ice_ring_uses_build_skb(rx_ring))
+		return ICE_SKB_PAD;
+	return 0;
+}
+
+/**
+ * ice_setup_rx_ctx - Configure a receive ring context
+ * @ring: The Rx ring to configure
+ *
+ * Configure the Rx descriptor ring in RLAN context.
+ */
+static int ice_setup_rx_ctx(struct ice_rx_ring *ring)
+{
+	int chain_len = ICE_MAX_CHAINED_RX_BUFS;
+	struct ice_vsi *vsi = ring->vsi;
+	u32 rxdid = ICE_RXDID_FLEX_NIC;
+	struct ice_rlan_ctx rlan_ctx;
+	struct ice_hw *hw;
+	u16 pf_q;
+	int err;
+
+	hw = &vsi->back->hw;
+
+	/* what is Rx queue number in global space of 2K Rx queues */
+	pf_q = vsi->rxq_map[ring->q_index];
+
+	/* clear the context structure first */
+	memset(&rlan_ctx, 0, sizeof(rlan_ctx));
+
+	/* Receive Queue Base Address.
+	 * Indicates the starting address of the descriptor queue defined in
+	 * 128 Byte units.
+	 */
+	rlan_ctx.base = ring->dma >> ICE_RLAN_BASE_S;
+
+	rlan_ctx.qlen = ring->count;
+
+	/* Receive Packet Data Buffer Size.
+	 * The Packet Data Buffer Size is defined in 128 byte units.
+	 */
+	rlan_ctx.dbuf = ring->rx_buf_len >> ICE_RLAN_CTX_DBUF_S;
+
+	/* use 32 byte descriptors */
+	rlan_ctx.dsize = 1;
+
+	/* Strip the Ethernet CRC bytes before the packet is posted to host
+	 * memory.
+	 */
+	rlan_ctx.crcstrip = !(ring->flags & ICE_RX_FLAGS_CRC_STRIP_DIS);
+
+	/* L2TSEL flag defines the reported L2 Tags in the receive descriptor
+	 * and it needs to remain 1 for non-DVM capable configurations to not
+	 * break backward compatibility for VF drivers. Setting this field to 0
+	 * will cause the single/outer VLAN tag to be stripped to the L2TAG2_2ND
+	 * field in the Rx descriptor. Setting it to 1 allows the VLAN tag to
+	 * be stripped in L2TAG1 of the Rx descriptor, which is where VFs will
+	 * check for the tag
+	 */
+	if (ice_is_dvm_ena(hw))
+		if (vsi->type == ICE_VSI_VF &&
+		    ice_vf_is_port_vlan_ena(vsi->vf))
+			rlan_ctx.l2tsel = 1;
+		else
+			rlan_ctx.l2tsel = 0;
+	else
+		rlan_ctx.l2tsel = 1;
+
+	rlan_ctx.dtype = ICE_RX_DTYPE_NO_SPLIT;
+	rlan_ctx.hsplit_0 = ICE_RLAN_RX_HSPLIT_0_NO_SPLIT;
+	rlan_ctx.hsplit_1 = ICE_RLAN_RX_HSPLIT_1_NO_SPLIT;
+
+	/* This controls whether VLAN is stripped from inner headers
+	 * The VLAN in the inner L2 header is stripped to the receive
+	 * descriptor if enabled by this flag.
+	 */
+	rlan_ctx.showiv = 0;
+
+	/* For AF_XDP ZC, we disallow packets to span on
+	 * multiple buffers, thus letting us skip that
+	 * handling in the fast-path.
+	 */
+	if (ring->xsk_pool)
+		chain_len = 1;
+	/* Max packet size for this queue - must not be set to a larger value
+	 * than 5 x DBUF
+	 */
+	rlan_ctx.rxmax = min_t(u32, vsi->max_frame,
+			       chain_len * ring->rx_buf_len);
+
+	/* Rx queue threshold in units of 64 */
+	rlan_ctx.lrxqthresh = 1;
+
+	/* Enable Flexible Descriptors in the queue context which
+	 * allows this driver to select a specific receive descriptor format
+	 * increasing context priority to pick up profile ID; default is 0x01;
+	 * setting to 0x03 to ensure profile is programming if prev context is
+	 * of same priority
+	 */
+	if (vsi->type != ICE_VSI_VF)
+		ice_write_qrxflxp_cntxt(hw, pf_q, rxdid, 0x3, true);
+	else
+		ice_write_qrxflxp_cntxt(hw, pf_q, ICE_RXDID_LEGACY_1, 0x3,
+					false);
+
+	/* Absolute queue number out of 2K needs to be passed */
+	err = ice_write_rxq_ctx(hw, &rlan_ctx, pf_q);
+	if (err) {
+		dev_err(ice_pf_to_dev(vsi->back), "Failed to set LAN Rx queue context for absolute Rx queue %d error: %d\n",
+			pf_q, err);
+		return -EIO;
+	}
+
+	if (vsi->type == ICE_VSI_VF)
+		return 0;
+
+	/* configure Rx buffer alignment */
+	if (!vsi->netdev || test_bit(ICE_FLAG_LEGACY_RX, vsi->back->flags))
+		ice_clear_ring_build_skb_ena(ring);
+	else
+		ice_set_ring_build_skb_ena(ring);
+
+	ring->rx_offset = ice_rx_offset(ring);
+
+	/* init queue specific tail register */
+	ring->tail = hw->hw_addr + QRX_TAIL(pf_q);
+	writel(0, ring->tail);
+
+	return 0;
+}
+
+/**
+ * ice_vsi_cfg_rxq - Configure an Rx queue
+ * @ring: the ring being configured
+ *
+ * Return 0 on success and a negative value on error.
+ */
+int ice_vsi_cfg_rxq(struct ice_rx_ring *ring)
+{
+	struct device *dev = ice_pf_to_dev(ring->vsi->back);
+	u32 num_bufs = ICE_RX_DESC_UNUSED(ring);
+	int err;
+
+	ring->rx_buf_len = ring->vsi->rx_buf_len;
+
+	if (ring->vsi->type == ICE_VSI_PF) {
+		if (!xdp_rxq_info_is_reg(&ring->xdp_rxq))
+			/* coverity[check_return] */
+			__xdp_rxq_info_reg(&ring->xdp_rxq, ring->netdev,
+					   ring->q_index,
+					   ring->q_vector->napi.napi_id,
+					   ring->vsi->rx_buf_len);
+
+		ring->xsk_pool = ice_xsk_pool(ring);
+		if (ring->xsk_pool) {
+			xdp_rxq_info_unreg_mem_model(&ring->xdp_rxq);
+
+			ring->rx_buf_len =
+				xsk_pool_get_rx_frame_size(ring->xsk_pool);
+			err = xdp_rxq_info_reg_mem_model(&ring->xdp_rxq,
+							 MEM_TYPE_XSK_BUFF_POOL,
+							 NULL);
+			if (err)
+				return err;
+			xsk_pool_set_rxq_info(ring->xsk_pool, &ring->xdp_rxq);
+
+			dev_info(dev, "Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring %d\n",
+				 ring->q_index);
+		} else {
+			if (!xdp_rxq_info_is_reg(&ring->xdp_rxq))
+				/* coverity[check_return] */
+				__xdp_rxq_info_reg(&ring->xdp_rxq,
+						   ring->netdev,
+						   ring->q_index,
+						   ring->q_vector->napi.napi_id,
+						   ring->vsi->rx_buf_len);
+
+			err = xdp_rxq_info_reg_mem_model(&ring->xdp_rxq,
+							 MEM_TYPE_PAGE_SHARED,
+							 NULL);
+			if (err)
+				return err;
+		}
+	}
+
+	xdp_init_buff(&ring->xdp, ice_rx_pg_size(ring) / 2, &ring->xdp_rxq);
+	ring->xdp.data = NULL;
+	err = ice_setup_rx_ctx(ring);
+	if (err) {
+		dev_err(dev, "ice_setup_rx_ctx failed for RxQ %d, err %d\n",
+			ring->q_index, err);
+		return err;
+	}
+
+	if (ring->xsk_pool) {
+		bool ok;
+
+		if (!xsk_buff_can_alloc(ring->xsk_pool, num_bufs)) {
+			dev_warn(dev, "XSK buffer pool does not provide enough addresses to fill %d buffers on Rx ring %d\n",
+				 num_bufs, ring->q_index);
+			dev_warn(dev, "Change Rx ring/fill queue size to avoid performance issues\n");
+
+			return 0;
+		}
+
+		ok = ice_alloc_rx_bufs_zc(ring, num_bufs);
+		if (!ok) {
+			u16 pf_q = ring->vsi->rxq_map[ring->q_index];
+
+			dev_info(dev, "Failed to allocate some buffers on XSK buffer pool enabled Rx ring %d (pf_q %d)\n",
+				 ring->q_index, pf_q);
+		}
+
+		return 0;
+	}
+
+	ice_alloc_rx_bufs(ring, num_bufs);
+
+	return 0;
+}
+
+/**
+ * __ice_vsi_get_qs - helper function for assigning queues from PF to VSI
+ * @qs_cfg: gathered variables needed for pf->vsi queues assignment
+ *
+ * This function first tries to find contiguous space. If it is not successful,
+ * it tries with the scatter approach.
+ *
+ * Return 0 on success and -ENOMEM in case of no left space in PF queue bitmap
+ */
+int __ice_vsi_get_qs(struct ice_qs_cfg *qs_cfg)
+{
+	int ret = 0;
+
+	ret = __ice_vsi_get_qs_contig(qs_cfg);
+	if (ret) {
+		/* contig failed, so try with scatter approach */
+		qs_cfg->mapping_mode = ICE_VSI_MAP_SCATTER;
+		qs_cfg->q_count = min_t(unsigned int, qs_cfg->q_count,
+					qs_cfg->scatter_count);
+		ret = __ice_vsi_get_qs_sc(qs_cfg);
+	}
+	return ret;
+}
+
+/**
+ * ice_vsi_ctrl_one_rx_ring - start/stop VSI's Rx ring with no busy wait
+ * @vsi: the VSI being configured
+ * @ena: start or stop the Rx ring
+ * @rxq_idx: 0-based Rx queue index for the VSI passed in
+ * @wait: wait or don't wait for configuration to finish in hardware
+ *
+ * Return 0 on success and negative on error.
+ */
+int
+ice_vsi_ctrl_one_rx_ring(struct ice_vsi *vsi, bool ena, u16 rxq_idx, bool wait)
+{
+	int pf_q = vsi->rxq_map[rxq_idx];
+	struct ice_pf *pf = vsi->back;
+	struct ice_hw *hw = &pf->hw;
+	u32 rx_reg;
+
+	rx_reg = rd32(hw, QRX_CTRL(pf_q));
+
+	/* Skip if the queue is already in the requested state */
+	if (ena == !!(rx_reg & QRX_CTRL_QENA_STAT_M))
+		return 0;
+
+	/* turn on/off the queue */
+	if (ena)
+		rx_reg |= QRX_CTRL_QENA_REQ_M;
+	else
+		rx_reg &= ~QRX_CTRL_QENA_REQ_M;
+	wr32(hw, QRX_CTRL(pf_q), rx_reg);
+
+	if (!wait)
+		return 0;
+
+	ice_flush(hw);
+	return ice_pf_rxq_wait(pf, pf_q, ena);
+}
+
+/**
+ * ice_vsi_wait_one_rx_ring - wait for a VSI's Rx ring to be stopped/started
+ * @vsi: the VSI being configured
+ * @ena: true/false to verify Rx ring has been enabled/disabled respectively
+ * @rxq_idx: 0-based Rx queue index for the VSI passed in
+ *
+ * This routine will wait for the given Rx queue of the VSI to reach the
+ * enabled or disabled state. Returns -ETIMEDOUT in case of failing to reach
+ * the requested state after multiple retries; else will return 0 in case of
+ * success.
+ */
+int ice_vsi_wait_one_rx_ring(struct ice_vsi *vsi, bool ena, u16 rxq_idx)
+{
+	int pf_q = vsi->rxq_map[rxq_idx];
+	struct ice_pf *pf = vsi->back;
+
+	return ice_pf_rxq_wait(pf, pf_q, ena);
+}
+
+/**
+ * ice_vsi_alloc_q_vectors - Allocate memory for interrupt vectors
+ * @vsi: the VSI being configured
+ *
+ * We allocate one q_vector per queue interrupt. If allocation fails we
+ * return -ENOMEM.
+ */
+int ice_vsi_alloc_q_vectors(struct ice_vsi *vsi)
+{
+	struct device *dev = ice_pf_to_dev(vsi->back);
+	u16 v_idx;
+	int err;
+
+	if (vsi->q_vectors[0]) {
+		dev_dbg(dev, "VSI %d has existing q_vectors\n", vsi->vsi_num);
+		return -EEXIST;
+	}
+
+	for (v_idx = 0; v_idx < vsi->num_q_vectors; v_idx++) {
+		err = ice_vsi_alloc_q_vector(vsi, v_idx);
+		if (err)
+			goto err_out;
+	}
+
+	return 0;
+
+err_out:
+	while (v_idx--)
+		ice_free_q_vector(vsi, v_idx);
+
+	dev_err(dev, "Failed to allocate %d q_vector for VSI %d, ret=%d\n",
+		vsi->num_q_vectors, vsi->vsi_num, err);
+	vsi->num_q_vectors = 0;
+	return err;
+}
+
+/**
+ * ice_vsi_map_rings_to_vectors - Map VSI rings to interrupt vectors
+ * @vsi: the VSI being configured
+ *
+ * This function maps descriptor rings to the queue-specific vectors allotted
+ * through the MSI-X enabling code. On a constrained vector budget, we map Tx
+ * and Rx rings to the vector as "efficiently" as possible.
+ */
+void ice_vsi_map_rings_to_vectors(struct ice_vsi *vsi)
+{
+	int q_vectors = vsi->num_q_vectors;
+	u16 tx_rings_rem, rx_rings_rem;
+	int v_id;
+
+	/* initially assigning remaining rings count to VSIs num queue value */
+	tx_rings_rem = vsi->num_txq;
+	rx_rings_rem = vsi->num_rxq;
+
+	for (v_id = 0; v_id < q_vectors; v_id++) {
+		struct ice_q_vector *q_vector = vsi->q_vectors[v_id];
+		u8 tx_rings_per_v, rx_rings_per_v;
+		u16 q_id, q_base;
+
+		/* Tx rings mapping to vector */
+		tx_rings_per_v = (u8)DIV_ROUND_UP(tx_rings_rem,
+						  q_vectors - v_id);
+		q_vector->num_ring_tx = tx_rings_per_v;
+		q_vector->tx.tx_ring = NULL;
+		q_vector->tx.itr_idx = ICE_TX_ITR;
+		q_base = vsi->num_txq - tx_rings_rem;
+
+		for (q_id = q_base; q_id < (q_base + tx_rings_per_v); q_id++) {
+			struct ice_tx_ring *tx_ring = vsi->tx_rings[q_id];
+
+			tx_ring->q_vector = q_vector;
+			tx_ring->next = q_vector->tx.tx_ring;
+			q_vector->tx.tx_ring = tx_ring;
+		}
+		tx_rings_rem -= tx_rings_per_v;
+
+		/* Rx rings mapping to vector */
+		rx_rings_per_v = (u8)DIV_ROUND_UP(rx_rings_rem,
+						  q_vectors - v_id);
+		q_vector->num_ring_rx = rx_rings_per_v;
+		q_vector->rx.rx_ring = NULL;
+		q_vector->rx.itr_idx = ICE_RX_ITR;
+		q_base = vsi->num_rxq - rx_rings_rem;
+
+		for (q_id = q_base; q_id < (q_base + rx_rings_per_v); q_id++) {
+			struct ice_rx_ring *rx_ring = vsi->rx_rings[q_id];
+
+			rx_ring->q_vector = q_vector;
+			rx_ring->next = q_vector->rx.rx_ring;
+			q_vector->rx.rx_ring = rx_ring;
+		}
+		rx_rings_rem -= rx_rings_per_v;
+	}
+}
+
+/**
+ * ice_vsi_free_q_vectors - Free memory allocated for interrupt vectors
+ * @vsi: the VSI having memory freed
+ */
+void ice_vsi_free_q_vectors(struct ice_vsi *vsi)
+{
+	int v_idx;
+
+	ice_for_each_q_vector(vsi, v_idx)
+		ice_free_q_vector(vsi, v_idx);
+}
+
+/**
+ * ice_vsi_cfg_txq - Configure single Tx queue
+ * @vsi: the VSI that queue belongs to
+ * @ring: Tx ring to be configured
+ * @qg_buf: queue group buffer
+ */
+int
+ice_vsi_cfg_txq(struct ice_vsi *vsi, struct ice_tx_ring *ring,
+		struct ice_aqc_add_tx_qgrp *qg_buf)
+{
+	u8 buf_len = struct_size(qg_buf, txqs, 1);
+	struct ice_tlan_ctx tlan_ctx = { 0 };
+	struct ice_aqc_add_txqs_perq *txq;
+	struct ice_channel *ch = ring->ch;
+	struct ice_pf *pf = vsi->back;
+	struct ice_hw *hw = &pf->hw;
+	int status;
+	u16 pf_q;
+	u8 tc;
+
+	/* Configure XPS */
+	ice_cfg_xps_tx_ring(ring);
+
+	pf_q = ring->reg_idx;
+	ice_setup_tx_ctx(ring, &tlan_ctx, pf_q);
+	/* copy context contents into the qg_buf */
+	qg_buf->txqs[0].txq_id = cpu_to_le16(pf_q);
+	ice_set_ctx(hw, (u8 *)&tlan_ctx, qg_buf->txqs[0].txq_ctx,
+		    ice_tlan_ctx_info);
+
+	/* init queue specific tail reg. It is referred as
+	 * transmit comm scheduler queue doorbell.
+	 */
+	ring->tail = hw->hw_addr + QTX_COMM_DBELL(pf_q);
+
+	if (IS_ENABLED(CONFIG_DCB))
+		tc = ring->dcb_tc;
+	else
+		tc = 0;
+
+	/* Add unique software queue handle of the Tx queue per
+	 * TC into the VSI Tx ring
+	 */
+	if (vsi->type == ICE_VSI_SWITCHDEV_CTRL) {
+		ring->q_handle = ice_eswitch_calc_txq_handle(ring);
+
+		if (ring->q_handle == ICE_INVAL_Q_INDEX)
+			return -ENODEV;
+	} else {
+		ring->q_handle = ice_calc_txq_handle(vsi, ring, tc);
+	}
+
+	if (ch)
+		status = ice_ena_vsi_txq(vsi->port_info, ch->ch_vsi->idx, 0,
+					 ring->q_handle, 1, qg_buf, buf_len,
+					 NULL);
+	else
+		status = ice_ena_vsi_txq(vsi->port_info, vsi->idx, tc,
+					 ring->q_handle, 1, qg_buf, buf_len,
+					 NULL);
+	if (status) {
+		dev_err(ice_pf_to_dev(pf), "Failed to set LAN Tx queue context, error: %d\n",
+			status);
+		return status;
+	}
+
+	/* Add Tx Queue TEID into the VSI Tx ring from the
+	 * response. This will complete configuring and
+	 * enabling the queue.
+	 */
+	txq = &qg_buf->txqs[0];
+	if (pf_q == le16_to_cpu(txq->txq_id))
+		ring->txq_teid = le32_to_cpu(txq->q_teid);
+
+	return 0;
+}
+
+/**
+ * ice_cfg_itr - configure the initial interrupt throttle values
+ * @hw: pointer to the HW structure
+ * @q_vector: interrupt vector that's being configured
+ *
+ * Configure interrupt throttling values for the ring containers that are
+ * associated with the interrupt vector passed in.
+ */
+void ice_cfg_itr(struct ice_hw *hw, struct ice_q_vector *q_vector)
+{
+	ice_cfg_itr_gran(hw);
+
+	if (q_vector->num_ring_rx)
+		ice_write_itr(&q_vector->rx, q_vector->rx.itr_setting);
+
+	if (q_vector->num_ring_tx)
+		ice_write_itr(&q_vector->tx, q_vector->tx.itr_setting);
+
+	ice_write_intrl(q_vector, q_vector->intrl);
+}
+
+/**
+ * ice_cfg_txq_interrupt - configure interrupt on Tx queue
+ * @vsi: the VSI being configured
+ * @txq: Tx queue being mapped to MSI-X vector
+ * @msix_idx: MSI-X vector index within the function
+ * @itr_idx: ITR index of the interrupt cause
+ *
+ * Configure interrupt on Tx queue by associating Tx queue to MSI-X vector
+ * within the function space.
+ */
+void
+ice_cfg_txq_interrupt(struct ice_vsi *vsi, u16 txq, u16 msix_idx, u16 itr_idx)
+{
+	struct ice_pf *pf = vsi->back;
+	struct ice_hw *hw = &pf->hw;
+	u32 val;
+
+	itr_idx = (itr_idx << QINT_TQCTL_ITR_INDX_S) & QINT_TQCTL_ITR_INDX_M;
+
+	val = QINT_TQCTL_CAUSE_ENA_M | itr_idx |
+	      ((msix_idx << QINT_TQCTL_MSIX_INDX_S) & QINT_TQCTL_MSIX_INDX_M);
+
+	wr32(hw, QINT_TQCTL(vsi->txq_map[txq]), val);
+	if (ice_is_xdp_ena_vsi(vsi)) {
+		u32 xdp_txq = txq + vsi->num_xdp_txq;
+
+		wr32(hw, QINT_TQCTL(vsi->txq_map[xdp_txq]),
+		     val);
+	}
+	ice_flush(hw);
+}
+
+/**
+ * ice_cfg_rxq_interrupt - configure interrupt on Rx queue
+ * @vsi: the VSI being configured
+ * @rxq: Rx queue being mapped to MSI-X vector
+ * @msix_idx: MSI-X vector index within the function
+ * @itr_idx: ITR index of the interrupt cause
+ *
+ * Configure interrupt on Rx queue by associating Rx queue to MSI-X vector
+ * within the function space.
+ */
+void
+ice_cfg_rxq_interrupt(struct ice_vsi *vsi, u16 rxq, u16 msix_idx, u16 itr_idx)
+{
+	struct ice_pf *pf = vsi->back;
+	struct ice_hw *hw = &pf->hw;
+	u32 val;
+
+	itr_idx = (itr_idx << QINT_RQCTL_ITR_INDX_S) & QINT_RQCTL_ITR_INDX_M;
+
+	val = QINT_RQCTL_CAUSE_ENA_M | itr_idx |
+	      ((msix_idx << QINT_RQCTL_MSIX_INDX_S) & QINT_RQCTL_MSIX_INDX_M);
+
+	wr32(hw, QINT_RQCTL(vsi->rxq_map[rxq]), val);
+
+	ice_flush(hw);
+}
+
+/**
+ * ice_trigger_sw_intr - trigger a software interrupt
+ * @hw: pointer to the HW structure
+ * @q_vector: interrupt vector to trigger the software interrupt for
+ */
+void ice_trigger_sw_intr(struct ice_hw *hw, struct ice_q_vector *q_vector)
+{
+	wr32(hw, GLINT_DYN_CTL(q_vector->reg_idx),
+	     (ICE_ITR_NONE << GLINT_DYN_CTL_ITR_INDX_S) |
+	     GLINT_DYN_CTL_SWINT_TRIG_M |
+	     GLINT_DYN_CTL_INTENA_M);
+}
+
+/**
+ * ice_vsi_stop_tx_ring - Disable single Tx ring
+ * @vsi: the VSI being configured
+ * @rst_src: reset source
+ * @rel_vmvf_num: Relative ID of VF/VM
+ * @ring: Tx ring to be stopped
+ * @txq_meta: Meta data of Tx ring to be stopped
+ */
+int
+ice_vsi_stop_tx_ring(struct ice_vsi *vsi, enum ice_disq_rst_src rst_src,
+		     u16 rel_vmvf_num, struct ice_tx_ring *ring,
+		     struct ice_txq_meta *txq_meta)
+{
+	struct ice_pf *pf = vsi->back;
+	struct ice_q_vector *q_vector;
+	struct ice_hw *hw = &pf->hw;
+	int status;
+	u32 val;
+
+	/* clear cause_ena bit for disabled queues */
+	val = rd32(hw, QINT_TQCTL(ring->reg_idx));
+	val &= ~QINT_TQCTL_CAUSE_ENA_M;
+	wr32(hw, QINT_TQCTL(ring->reg_idx), val);
+
+	/* software is expected to wait for 100 ns */
+	ndelay(100);
+
+	/* trigger a software interrupt for the vector
+	 * associated to the queue to schedule NAPI handler
+	 */
+	q_vector = ring->q_vector;
+	if (q_vector && !(vsi->vf && ice_is_vf_disabled(vsi->vf)))
+		ice_trigger_sw_intr(hw, q_vector);
+
+	status = ice_dis_vsi_txq(vsi->port_info, txq_meta->vsi_idx,
+				 txq_meta->tc, 1, &txq_meta->q_handle,
+				 &txq_meta->q_id, &txq_meta->q_teid, rst_src,
+				 rel_vmvf_num, NULL);
+
+	/* if the disable queue command was exercised during an
+	 * active reset flow, -EBUSY is returned.
+	 * This is not an error as the reset operation disables
+	 * queues at the hardware level anyway.
+	 */
+	if (status == -EBUSY) {
+		dev_dbg(ice_pf_to_dev(vsi->back), "Reset in progress. LAN Tx queues already disabled\n");
+	} else if (status == -ENOENT) {
+		dev_dbg(ice_pf_to_dev(vsi->back), "LAN Tx queues do not exist, nothing to disable\n");
+	} else if (status) {
+		dev_dbg(ice_pf_to_dev(vsi->back), "Failed to disable LAN Tx queues, error: %d\n",
+			status);
+		return status;
+	}
+
+	return 0;
+}
+
+/**
+ * ice_fill_txq_meta - Prepare the Tx queue's meta data
+ * @vsi: VSI that ring belongs to
+ * @ring: ring that txq_meta will be based on
+ * @txq_meta: a helper struct that wraps Tx queue's information
+ *
+ * Set up a helper struct that will contain all the necessary fields that
+ * are needed for stopping Tx queue
+ */
+void
+ice_fill_txq_meta(struct ice_vsi *vsi, struct ice_tx_ring *ring,
+		  struct ice_txq_meta *txq_meta)
+{
+	struct ice_channel *ch = ring->ch;
+	u8 tc;
+
+	if (IS_ENABLED(CONFIG_DCB))
+		tc = ring->dcb_tc;
+	else
+		tc = 0;
+
+	txq_meta->q_id = ring->reg_idx;
+	txq_meta->q_teid = ring->txq_teid;
+	txq_meta->q_handle = ring->q_handle;
+	if (ch) {
+		txq_meta->vsi_idx = ch->ch_vsi->idx;
+		txq_meta->tc = 0;
+	} else {
+		txq_meta->vsi_idx = vsi->idx;
+		txq_meta->tc = tc;
+	}
+}