Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 683 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/igc/igc_defines.h b/drivers/net/ethernet/intel/igc/igc_defines.h
new file mode 100644
index 000000000..9dec3563c
--- /dev/null
+++ b/drivers/net/ethernet/intel/igc/igc_defines.h
@@ -0,0 +1,683 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c)  2018 Intel Corporation */
+
+#ifndef _IGC_DEFINES_H_
+#define _IGC_DEFINES_H_
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define REQ_TX_DESCRIPTOR_MULTIPLE	8
+#define REQ_RX_DESCRIPTOR_MULTIPLE	8
+
+#define IGC_CTRL_EXT_SDP2_DIR	0x00000400 /* SDP2 Data direction */
+#define IGC_CTRL_EXT_SDP3_DIR	0x00000800 /* SDP3 Data direction */
+#define IGC_CTRL_EXT_DRV_LOAD	0x10000000 /* Drv loaded bit for FW */
+
+/* Definitions for power management and wakeup registers */
+/* Wake Up Control */
+#define IGC_WUC_PME_EN	0x00000002 /* PME Enable */
+
+/* Wake Up Filter Control */
+#define IGC_WUFC_LNKC		0x00000001 /* Link Status Change Wakeup Enable */
+#define IGC_WUFC_MAG		0x00000002 /* Magic Packet Wakeup Enable */
+#define IGC_WUFC_EX		0x00000004 /* Directed Exact Wakeup Enable */
+#define IGC_WUFC_MC		0x00000008 /* Directed Multicast Wakeup Enable */
+#define IGC_WUFC_BC		0x00000010 /* Broadcast Wakeup Enable */
+#define IGC_WUFC_FLEX_HQ	BIT(14)	   /* Flex Filters Host Queuing */
+#define IGC_WUFC_FLX0		BIT(16)	   /* Flexible Filter 0 Enable */
+#define IGC_WUFC_FLX1		BIT(17)	   /* Flexible Filter 1 Enable */
+#define IGC_WUFC_FLX2		BIT(18)	   /* Flexible Filter 2 Enable */
+#define IGC_WUFC_FLX3		BIT(19)	   /* Flexible Filter 3 Enable */
+#define IGC_WUFC_FLX4		BIT(20)	   /* Flexible Filter 4 Enable */
+#define IGC_WUFC_FLX5		BIT(21)	   /* Flexible Filter 5 Enable */
+#define IGC_WUFC_FLX6		BIT(22)	   /* Flexible Filter 6 Enable */
+#define IGC_WUFC_FLX7		BIT(23)	   /* Flexible Filter 7 Enable */
+
+#define IGC_WUFC_FILTER_MASK GENMASK(23, 14)
+
+#define IGC_CTRL_ADVD3WUC	0x00100000  /* D3 WUC */
+
+/* Wake Up Status */
+#define IGC_WUS_EX	0x00000004 /* Directed Exact */
+#define IGC_WUS_ARPD	0x00000020 /* Directed ARP Request */
+#define IGC_WUS_IPV4	0x00000040 /* Directed IPv4 */
+#define IGC_WUS_IPV6	0x00000080 /* Directed IPv6 */
+#define IGC_WUS_NSD	0x00000400 /* Directed IPv6 Neighbor Solicitation */
+
+/* Packet types that are enabled for wake packet delivery */
+#define WAKE_PKT_WUS ( \
+	IGC_WUS_EX   | \
+	IGC_WUS_ARPD | \
+	IGC_WUS_IPV4 | \
+	IGC_WUS_IPV6 | \
+	IGC_WUS_NSD)
+
+/* Wake Up Packet Length */
+#define IGC_WUPL_MASK	0x00000FFF
+
+/* Wake Up Packet Memory stores the first 128 bytes of the wake up packet */
+#define IGC_WUPM_BYTES	128
+
+/* Wakeup Filter Control Extended */
+#define IGC_WUFC_EXT_FLX8	BIT(8)	/* Flexible Filter 8 Enable */
+#define IGC_WUFC_EXT_FLX9	BIT(9)	/* Flexible Filter 9 Enable */
+#define IGC_WUFC_EXT_FLX10	BIT(10)	/* Flexible Filter 10 Enable */
+#define IGC_WUFC_EXT_FLX11	BIT(11)	/* Flexible Filter 11 Enable */
+#define IGC_WUFC_EXT_FLX12	BIT(12)	/* Flexible Filter 12 Enable */
+#define IGC_WUFC_EXT_FLX13	BIT(13)	/* Flexible Filter 13 Enable */
+#define IGC_WUFC_EXT_FLX14	BIT(14)	/* Flexible Filter 14 Enable */
+#define IGC_WUFC_EXT_FLX15	BIT(15)	/* Flexible Filter 15 Enable */
+#define IGC_WUFC_EXT_FLX16	BIT(16)	/* Flexible Filter 16 Enable */
+#define IGC_WUFC_EXT_FLX17	BIT(17)	/* Flexible Filter 17 Enable */
+#define IGC_WUFC_EXT_FLX18	BIT(18)	/* Flexible Filter 18 Enable */
+#define IGC_WUFC_EXT_FLX19	BIT(19)	/* Flexible Filter 19 Enable */
+#define IGC_WUFC_EXT_FLX20	BIT(20)	/* Flexible Filter 20 Enable */
+#define IGC_WUFC_EXT_FLX21	BIT(21)	/* Flexible Filter 21 Enable */
+#define IGC_WUFC_EXT_FLX22	BIT(22)	/* Flexible Filter 22 Enable */
+#define IGC_WUFC_EXT_FLX23	BIT(23)	/* Flexible Filter 23 Enable */
+#define IGC_WUFC_EXT_FLX24	BIT(24)	/* Flexible Filter 24 Enable */
+#define IGC_WUFC_EXT_FLX25	BIT(25)	/* Flexible Filter 25 Enable */
+#define IGC_WUFC_EXT_FLX26	BIT(26)	/* Flexible Filter 26 Enable */
+#define IGC_WUFC_EXT_FLX27	BIT(27)	/* Flexible Filter 27 Enable */
+#define IGC_WUFC_EXT_FLX28	BIT(28)	/* Flexible Filter 28 Enable */
+#define IGC_WUFC_EXT_FLX29	BIT(29)	/* Flexible Filter 29 Enable */
+#define IGC_WUFC_EXT_FLX30	BIT(30)	/* Flexible Filter 30 Enable */
+#define IGC_WUFC_EXT_FLX31	BIT(31)	/* Flexible Filter 31 Enable */
+
+#define IGC_WUFC_EXT_FILTER_MASK GENMASK(31, 8)
+
+/* Loop limit on how long we wait for auto-negotiation to complete */
+#define COPPER_LINK_UP_LIMIT		10
+#define PHY_AUTO_NEG_LIMIT		45
+
+/* Number of 100 microseconds we wait for PCI Express master disable */
+#define MASTER_DISABLE_TIMEOUT		800
+/*Blocks new Master requests */
+#define IGC_CTRL_GIO_MASTER_DISABLE	0x00000004
+/* Status of Master requests. */
+#define IGC_STATUS_GIO_MASTER_ENABLE	0x00080000
+
+/* Receive Address
+ * Number of high/low register pairs in the RAR. The RAR (Receive Address
+ * Registers) holds the directed and multicast addresses that we monitor.
+ * Technically, we have 16 spots.  However, we reserve one of these spots
+ * (RAR[15]) for our directed address used by controllers with
+ * manageability enabled, allowing us room for 15 multicast addresses.
+ */
+#define IGC_RAH_RAH_MASK	0x0000FFFF
+#define IGC_RAH_ASEL_MASK	0x00030000
+#define IGC_RAH_ASEL_SRC_ADDR	BIT(16)
+#define IGC_RAH_QSEL_MASK	0x000C0000
+#define IGC_RAH_QSEL_SHIFT	18
+#define IGC_RAH_QSEL_ENABLE	BIT(28)
+#define IGC_RAH_AV		0x80000000 /* Receive descriptor valid */
+
+#define IGC_RAL_MAC_ADDR_LEN	4
+#define IGC_RAH_MAC_ADDR_LEN	2
+
+/* Error Codes */
+#define IGC_SUCCESS			0
+#define IGC_ERR_NVM			1
+#define IGC_ERR_PHY			2
+#define IGC_ERR_CONFIG			3
+#define IGC_ERR_PARAM			4
+#define IGC_ERR_MAC_INIT		5
+#define IGC_ERR_RESET			9
+#define IGC_ERR_MASTER_REQUESTS_PENDING	10
+#define IGC_ERR_BLK_PHY_RESET		12
+#define IGC_ERR_SWFW_SYNC		13
+
+/* Device Control */
+#define IGC_CTRL_RST		0x04000000  /* Global reset */
+
+#define IGC_CTRL_PHY_RST	0x80000000  /* PHY Reset */
+#define IGC_CTRL_SLU		0x00000040  /* Set link up (Force Link) */
+#define IGC_CTRL_FRCSPD		0x00000800  /* Force Speed */
+#define IGC_CTRL_FRCDPX		0x00001000  /* Force Duplex */
+#define IGC_CTRL_VME		0x40000000  /* IEEE VLAN mode enable */
+
+#define IGC_CTRL_RFCE		0x08000000  /* Receive Flow Control enable */
+#define IGC_CTRL_TFCE		0x10000000  /* Transmit flow control enable */
+
+#define IGC_CTRL_SDP0_DIR	0x00400000  /* SDP0 Data direction */
+#define IGC_CTRL_SDP1_DIR	0x00800000  /* SDP1 Data direction */
+
+/* As per the EAS the maximum supported size is 9.5KB (9728 bytes) */
+#define MAX_JUMBO_FRAME_SIZE	0x2600
+
+/* PBA constants */
+#define IGC_PBA_34K		0x0022
+
+/* SW Semaphore Register */
+#define IGC_SWSM_SMBI		0x00000001 /* Driver Semaphore bit */
+#define IGC_SWSM_SWESMBI	0x00000002 /* FW Semaphore bit */
+
+/* SWFW_SYNC Definitions */
+#define IGC_SWFW_EEP_SM		0x1
+#define IGC_SWFW_PHY0_SM	0x2
+
+/* Autoneg Advertisement Register */
+#define NWAY_AR_10T_HD_CAPS	0x0020   /* 10T   Half Duplex Capable */
+#define NWAY_AR_10T_FD_CAPS	0x0040   /* 10T   Full Duplex Capable */
+#define NWAY_AR_100TX_HD_CAPS	0x0080   /* 100TX Half Duplex Capable */
+#define NWAY_AR_100TX_FD_CAPS	0x0100   /* 100TX Full Duplex Capable */
+#define NWAY_AR_PAUSE		0x0400   /* Pause operation desired */
+#define NWAY_AR_ASM_DIR		0x0800   /* Asymmetric Pause Direction bit */
+
+/* Link Partner Ability Register (Base Page) */
+#define NWAY_LPAR_PAUSE		0x0400 /* LP Pause operation desired */
+#define NWAY_LPAR_ASM_DIR	0x0800 /* LP Asymmetric Pause Direction bit */
+
+/* 1000BASE-T Control Register */
+#define CR_1000T_HD_CAPS	0x0100 /* Advertise 1000T HD capability */
+#define CR_1000T_FD_CAPS	0x0200 /* Advertise 1000T FD capability  */
+
+/* 1000BASE-T Status Register */
+#define SR_1000T_REMOTE_RX_STATUS	0x1000 /* Remote receiver OK */
+
+/* PHY GPY 211 registers */
+#define STANDARD_AN_REG_MASK	0x0007 /* MMD */
+#define ANEG_MULTIGBT_AN_CTRL	0x0020 /* MULTI GBT AN Control Register */
+#define MMD_DEVADDR_SHIFT	16     /* Shift MMD to higher bits */
+#define CR_2500T_FD_CAPS	0x0080 /* Advertise 2500T FD capability */
+
+/* NVM Control */
+/* Number of milliseconds for NVM auto read done after MAC reset. */
+#define AUTO_READ_DONE_TIMEOUT		10
+#define IGC_EECD_AUTO_RD		0x00000200  /* NVM Auto Read done */
+#define IGC_EECD_REQ		0x00000040 /* NVM Access Request */
+#define IGC_EECD_GNT		0x00000080 /* NVM Access Grant */
+/* NVM Addressing bits based on type 0=small, 1=large */
+#define IGC_EECD_ADDR_BITS		0x00000400
+#define IGC_NVM_GRANT_ATTEMPTS		1000 /* NVM # attempts to gain grant */
+#define IGC_EECD_SIZE_EX_MASK		0x00007800  /* NVM Size */
+#define IGC_EECD_SIZE_EX_SHIFT		11
+#define IGC_EECD_FLUPD_I225		0x00800000 /* Update FLASH */
+#define IGC_EECD_FLUDONE_I225		0x04000000 /* Update FLASH done*/
+#define IGC_EECD_FLASH_DETECTED_I225	0x00080000 /* FLASH detected */
+#define IGC_FLUDONE_ATTEMPTS		20000
+#define IGC_EERD_EEWR_MAX_COUNT		512 /* buffered EEPROM words rw */
+
+/* Offset to data in NVM read/write registers */
+#define IGC_NVM_RW_REG_DATA	16
+#define IGC_NVM_RW_REG_DONE	2    /* Offset to READ/WRITE done bit */
+#define IGC_NVM_RW_REG_START	1    /* Start operation */
+#define IGC_NVM_RW_ADDR_SHIFT	2    /* Shift to the address bits */
+#define IGC_NVM_POLL_READ	0    /* Flag for polling for read complete */
+#define IGC_NVM_DEV_STARTER	5    /* Dev_starter Version */
+
+/* NVM Word Offsets */
+#define NVM_CHECKSUM_REG		0x003F
+
+/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */
+#define NVM_SUM				0xBABA
+#define NVM_WORD_SIZE_BASE_SHIFT	6
+
+/* Collision related configuration parameters */
+#define IGC_COLLISION_THRESHOLD		15
+#define IGC_CT_SHIFT			4
+#define IGC_COLLISION_DISTANCE		63
+#define IGC_COLD_SHIFT			12
+
+/* Device Status */
+#define IGC_STATUS_FD		0x00000001      /* Full duplex.0=half,1=full */
+#define IGC_STATUS_LU		0x00000002      /* Link up.0=no,1=link */
+#define IGC_STATUS_FUNC_MASK	0x0000000C      /* PCI Function Mask */
+#define IGC_STATUS_FUNC_SHIFT	2
+#define IGC_STATUS_TXOFF	0x00000010      /* transmission paused */
+#define IGC_STATUS_SPEED_100	0x00000040      /* Speed 100Mb/s */
+#define IGC_STATUS_SPEED_1000	0x00000080      /* Speed 1000Mb/s */
+#define IGC_STATUS_SPEED_2500	0x00400000	/* Speed 2.5Gb/s */
+
+#define SPEED_10		10
+#define SPEED_100		100
+#define SPEED_1000		1000
+#define SPEED_2500		2500
+#define HALF_DUPLEX		1
+#define FULL_DUPLEX		2
+
+/* 1Gbps and 2.5Gbps half duplex is not supported, nor spec-compliant. */
+#define ADVERTISE_10_HALF		0x0001
+#define ADVERTISE_10_FULL		0x0002
+#define ADVERTISE_100_HALF		0x0004
+#define ADVERTISE_100_FULL		0x0008
+#define ADVERTISE_1000_HALF		0x0010 /* Not used, just FYI */
+#define ADVERTISE_1000_FULL		0x0020
+#define ADVERTISE_2500_HALF		0x0040 /* Not used, just FYI */
+#define ADVERTISE_2500_FULL		0x0080
+
+#define IGC_ALL_SPEED_DUPLEX_2500 ( \
+	ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \
+	ADVERTISE_100_FULL | ADVERTISE_1000_FULL | ADVERTISE_2500_FULL)
+
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT_2500	IGC_ALL_SPEED_DUPLEX_2500
+
+/* Interrupt Cause Read */
+#define IGC_ICR_TXDW		BIT(0)	/* Transmit desc written back */
+#define IGC_ICR_TXQE		BIT(1)	/* Transmit Queue empty */
+#define IGC_ICR_LSC		BIT(2)	/* Link Status Change */
+#define IGC_ICR_RXSEQ		BIT(3)	/* Rx sequence error */
+#define IGC_ICR_RXDMT0		BIT(4)	/* Rx desc min. threshold (0) */
+#define IGC_ICR_RXO		BIT(6)	/* Rx overrun */
+#define IGC_ICR_RXT0		BIT(7)	/* Rx timer intr (ring 0) */
+#define IGC_ICR_TS		BIT(19)	/* Time Sync Interrupt */
+#define IGC_ICR_DRSTA		BIT(30)	/* Device Reset Asserted */
+
+/* If this bit asserted, the driver should claim the interrupt */
+#define IGC_ICR_INT_ASSERTED	BIT(31)
+
+#define IGC_ICS_RXT0		IGC_ICR_RXT0 /* Rx timer intr */
+
+#define IMS_ENABLE_MASK ( \
+	IGC_IMS_RXT0   |    \
+	IGC_IMS_TXDW   |    \
+	IGC_IMS_RXDMT0 |    \
+	IGC_IMS_RXSEQ  |    \
+	IGC_IMS_LSC)
+
+/* Interrupt Mask Set */
+#define IGC_IMS_TXDW		IGC_ICR_TXDW	/* Tx desc written back */
+#define IGC_IMS_RXSEQ		IGC_ICR_RXSEQ	/* Rx sequence error */
+#define IGC_IMS_LSC		IGC_ICR_LSC	/* Link Status Change */
+#define IGC_IMS_DOUTSYNC	IGC_ICR_DOUTSYNC /* NIC DMA out of sync */
+#define IGC_IMS_DRSTA		IGC_ICR_DRSTA	/* Device Reset Asserted */
+#define IGC_IMS_RXT0		IGC_ICR_RXT0	/* Rx timer intr */
+#define IGC_IMS_RXDMT0		IGC_ICR_RXDMT0	/* Rx desc min. threshold */
+#define IGC_IMS_TS		IGC_ICR_TS	/* Time Sync Interrupt */
+
+#define IGC_QVECTOR_MASK	0x7FFC		/* Q-vector mask */
+#define IGC_ITR_VAL_MASK	0x04		/* ITR value mask */
+
+/* Interrupt Cause Set */
+#define IGC_ICS_LSC		IGC_ICR_LSC       /* Link Status Change */
+#define IGC_ICS_RXDMT0		IGC_ICR_RXDMT0    /* rx desc min. threshold */
+
+#define IGC_ICR_DOUTSYNC	0x10000000 /* NIC DMA out of sync */
+#define IGC_EITR_CNT_IGNR	0x80000000 /* Don't reset counters on write */
+#define IGC_IVAR_VALID		0x80
+#define IGC_GPIE_NSICR		0x00000001
+#define IGC_GPIE_MSIX_MODE	0x00000010
+#define IGC_GPIE_EIAME		0x40000000
+#define IGC_GPIE_PBA		0x80000000
+
+/* Receive Descriptor bit definitions */
+#define IGC_RXD_STAT_DD		0x01    /* Descriptor Done */
+
+/* Transmit Descriptor bit definitions */
+#define IGC_TXD_DTYP_D		0x00100000 /* Data Descriptor */
+#define IGC_TXD_DTYP_C		0x00000000 /* Context Descriptor */
+#define IGC_TXD_POPTS_IXSM	0x01       /* Insert IP checksum */
+#define IGC_TXD_POPTS_TXSM	0x02       /* Insert TCP/UDP checksum */
+#define IGC_TXD_CMD_EOP		0x01000000 /* End of Packet */
+#define IGC_TXD_CMD_IC		0x04000000 /* Insert Checksum */
+#define IGC_TXD_CMD_DEXT	0x20000000 /* Desc extension (0 = legacy) */
+#define IGC_TXD_CMD_VLE		0x40000000 /* Add VLAN tag */
+#define IGC_TXD_STAT_DD		0x00000001 /* Descriptor Done */
+#define IGC_TXD_CMD_TCP		0x01000000 /* TCP packet */
+#define IGC_TXD_CMD_IP		0x02000000 /* IP packet */
+#define IGC_TXD_CMD_TSE		0x04000000 /* TCP Seg enable */
+#define IGC_TXD_EXTCMD_TSTAMP	0x00000010 /* IEEE1588 Timestamp packet */
+
+/* IPSec Encrypt Enable */
+#define IGC_ADVTXD_L4LEN_SHIFT	8  /* Adv ctxt L4LEN shift */
+#define IGC_ADVTXD_MSS_SHIFT	16 /* Adv ctxt MSS shift */
+
+#define IGC_ADVTXD_TSN_CNTX_FIRST	0x00000080
+
+/* Transmit Control */
+#define IGC_TCTL_EN		0x00000002 /* enable Tx */
+#define IGC_TCTL_PSP		0x00000008 /* pad short packets */
+#define IGC_TCTL_CT		0x00000ff0 /* collision threshold */
+#define IGC_TCTL_COLD		0x003ff000 /* collision distance */
+#define IGC_TCTL_RTLC		0x01000000 /* Re-transmit on late collision */
+
+/* Flow Control Constants */
+#define FLOW_CONTROL_ADDRESS_LOW	0x00C28001
+#define FLOW_CONTROL_ADDRESS_HIGH	0x00000100
+#define FLOW_CONTROL_TYPE		0x8808
+/* Enable XON frame transmission */
+#define IGC_FCRTL_XONE			0x80000000
+
+/* Management Control */
+#define IGC_MANC_RCV_TCO_EN	0x00020000 /* Receive TCO Packets Enabled */
+#define IGC_MANC_BLK_PHY_RST_ON_IDE	0x00040000 /* Block phy resets */
+
+/* Receive Control */
+#define IGC_RCTL_RST		0x00000001 /* Software reset */
+#define IGC_RCTL_EN		0x00000002 /* enable */
+#define IGC_RCTL_SBP		0x00000004 /* store bad packet */
+#define IGC_RCTL_UPE		0x00000008 /* unicast promisc enable */
+#define IGC_RCTL_MPE		0x00000010 /* multicast promisc enable */
+#define IGC_RCTL_LPE		0x00000020 /* long packet enable */
+#define IGC_RCTL_LBM_MAC	0x00000040 /* MAC loopback mode */
+#define IGC_RCTL_LBM_TCVR	0x000000C0 /* tcvr loopback mode */
+
+#define IGC_RCTL_RDMTS_HALF	0x00000000 /* Rx desc min thresh size */
+#define IGC_RCTL_BAM		0x00008000 /* broadcast enable */
+
+/* Split Replication Receive Control */
+#define IGC_SRRCTL_TIMESTAMP		0x40000000
+#define IGC_SRRCTL_TIMER1SEL(timer)	(((timer) & 0x3) << 14)
+#define IGC_SRRCTL_TIMER0SEL(timer)	(((timer) & 0x3) << 17)
+
+/* Receive Descriptor bit definitions */
+#define IGC_RXD_STAT_EOP	0x02	/* End of Packet */
+#define IGC_RXD_STAT_IXSM	0x04	/* Ignore checksum */
+#define IGC_RXD_STAT_UDPCS	0x10	/* UDP xsum calculated */
+#define IGC_RXD_STAT_TCPCS	0x20	/* TCP xsum calculated */
+#define IGC_RXD_STAT_VP		0x08	/* IEEE VLAN Packet */
+
+#define IGC_RXDEXT_STATERR_LB	0x00040000
+
+/* Advanced Receive Descriptor bit definitions */
+#define IGC_RXDADV_STAT_TSIP	0x08000 /* timestamp in packet */
+
+#define IGC_RXDEXT_STATERR_L4E		0x20000000
+#define IGC_RXDEXT_STATERR_IPE		0x40000000
+#define IGC_RXDEXT_STATERR_RXE		0x80000000
+
+#define IGC_MRQC_RSS_FIELD_IPV4_TCP	0x00010000
+#define IGC_MRQC_RSS_FIELD_IPV4		0x00020000
+#define IGC_MRQC_RSS_FIELD_IPV6_TCP_EX	0x00040000
+#define IGC_MRQC_RSS_FIELD_IPV6		0x00100000
+#define IGC_MRQC_RSS_FIELD_IPV6_TCP	0x00200000
+
+/* Header split receive */
+#define IGC_RFCTL_IPV6_EX_DIS	0x00010000
+#define IGC_RFCTL_LEF		0x00040000
+
+#define IGC_RCTL_SZ_256		0x00030000 /* Rx buffer size 256 */
+
+#define IGC_RCTL_MO_SHIFT	12 /* multicast offset shift */
+#define IGC_RCTL_CFIEN		0x00080000 /* canonical form enable */
+#define IGC_RCTL_DPF		0x00400000 /* discard pause frames */
+#define IGC_RCTL_PMCF		0x00800000 /* pass MAC control frames */
+#define IGC_RCTL_SECRC		0x04000000 /* Strip Ethernet CRC */
+
+#define I225_RXPBSIZE_DEFAULT	0x000000A2 /* RXPBSIZE default */
+#define I225_TXPBSIZE_DEFAULT	0x04000014 /* TXPBSIZE default */
+#define IGC_RXPBS_CFG_TS_EN	0x80000000 /* Timestamp in Rx buffer */
+
+#define IGC_TXPBSIZE_TSN	0x04145145 /* 5k bytes buffer for each queue */
+
+#define IGC_DTXMXPKTSZ_TSN	0x19 /* 1600 bytes of max TX DMA packet size */
+#define IGC_DTXMXPKTSZ_DEFAULT	0x98 /* 9728-byte Jumbo frames */
+
+/* Transmit Scheduling Latency */
+/* Latency between transmission scheduling (LaunchTime) and the time
+ * the packet is transmitted to the network in nanosecond.
+ */
+#define IGC_TXOFFSET_SPEED_10	0x000034BC
+#define IGC_TXOFFSET_SPEED_100	0x00000578
+#define IGC_TXOFFSET_SPEED_1000	0x0000012C
+#define IGC_TXOFFSET_SPEED_2500	0x00000578
+
+/* Time Sync Interrupt Causes */
+#define IGC_TSICR_SYS_WRAP	BIT(0) /* SYSTIM Wrap around. */
+#define IGC_TSICR_TXTS		BIT(1) /* Transmit Timestamp. */
+#define IGC_TSICR_TT0		BIT(3) /* Target Time 0 Trigger. */
+#define IGC_TSICR_TT1		BIT(4) /* Target Time 1 Trigger. */
+#define IGC_TSICR_AUTT0		BIT(5) /* Auxiliary Timestamp 0 Taken. */
+#define IGC_TSICR_AUTT1		BIT(6) /* Auxiliary Timestamp 1 Taken. */
+
+#define IGC_TSICR_INTERRUPTS	IGC_TSICR_TXTS
+
+#define IGC_FTQF_VF_BP		0x00008000
+#define IGC_FTQF_1588_TIME_STAMP	0x08000000
+#define IGC_FTQF_MASK			0xF0000000
+#define IGC_FTQF_MASK_PROTO_BP	0x10000000
+
+/* Time Sync Receive Control bit definitions */
+#define IGC_TSYNCRXCTL_TYPE_MASK	0x0000000E  /* Rx type mask */
+#define IGC_TSYNCRXCTL_TYPE_L2_V2	0x00
+#define IGC_TSYNCRXCTL_TYPE_L4_V1	0x02
+#define IGC_TSYNCRXCTL_TYPE_L2_L4_V2	0x04
+#define IGC_TSYNCRXCTL_TYPE_ALL		0x08
+#define IGC_TSYNCRXCTL_TYPE_EVENT_V2	0x0A
+#define IGC_TSYNCRXCTL_ENABLED		0x00000010  /* enable Rx timestamping */
+#define IGC_TSYNCRXCTL_SYSCFI		0x00000020  /* Sys clock frequency */
+#define IGC_TSYNCRXCTL_RXSYNSIG		0x00000400  /* Sample RX tstamp in PHY sop */
+
+/* Time Sync Receive Configuration */
+#define IGC_TSYNCRXCFG_PTP_V1_CTRLT_MASK	0x000000FF
+#define IGC_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE	0x00
+#define IGC_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE	0x01
+
+/* Immediate Interrupt Receive */
+#define IGC_IMIR_CLEAR_MASK	0xF001FFFF /* IMIR Reg Clear Mask */
+#define IGC_IMIR_PORT_BYPASS	0x20000 /* IMIR Port Bypass Bit */
+#define IGC_IMIR_PRIORITY_SHIFT	29 /* IMIR Priority Shift */
+#define IGC_IMIREXT_CLEAR_MASK	0x7FFFF /* IMIREXT Reg Clear Mask */
+
+/* Immediate Interrupt Receive Extended */
+#define IGC_IMIREXT_CTRL_BP	0x00080000  /* Bypass check of ctrl bits */
+#define IGC_IMIREXT_SIZE_BP	0x00001000  /* Packet size bypass */
+
+/* Time Sync Transmit Control bit definitions */
+#define IGC_TSYNCTXCTL_TXTT_0			0x00000001  /* Tx timestamp reg 0 valid */
+#define IGC_TSYNCTXCTL_ENABLED			0x00000010  /* enable Tx timestamping */
+#define IGC_TSYNCTXCTL_MAX_ALLOWED_DLY_MASK	0x0000F000  /* max delay */
+#define IGC_TSYNCTXCTL_SYNC_COMP_ERR		0x20000000  /* sync err */
+#define IGC_TSYNCTXCTL_SYNC_COMP		0x40000000  /* sync complete */
+#define IGC_TSYNCTXCTL_START_SYNC		0x80000000  /* initiate sync */
+#define IGC_TSYNCTXCTL_TXSYNSIG			0x00000020  /* Sample TX tstamp in PHY sop */
+
+/* Timer selection bits */
+#define IGC_AUX_IO_TIMER_SEL_SYSTIM0	(0u << 30) /* Select SYSTIM0 for auxiliary time stamp */
+#define IGC_AUX_IO_TIMER_SEL_SYSTIM1	(1u << 30) /* Select SYSTIM1 for auxiliary time stamp */
+#define IGC_AUX_IO_TIMER_SEL_SYSTIM2	(2u << 30) /* Select SYSTIM2 for auxiliary time stamp */
+#define IGC_AUX_IO_TIMER_SEL_SYSTIM3	(3u << 30) /* Select SYSTIM3 for auxiliary time stamp */
+#define IGC_TT_IO_TIMER_SEL_SYSTIM0	(0u << 30) /* Select SYSTIM0 for target time stamp */
+#define IGC_TT_IO_TIMER_SEL_SYSTIM1	(1u << 30) /* Select SYSTIM1 for target time stamp */
+#define IGC_TT_IO_TIMER_SEL_SYSTIM2	(2u << 30) /* Select SYSTIM2 for target time stamp */
+#define IGC_TT_IO_TIMER_SEL_SYSTIM3	(3u << 30) /* Select SYSTIM3 for target time stamp */
+
+/* TSAUXC Configuration Bits */
+#define IGC_TSAUXC_EN_TT0	BIT(0)  /* Enable target time 0. */
+#define IGC_TSAUXC_EN_TT1	BIT(1)  /* Enable target time 1. */
+#define IGC_TSAUXC_EN_CLK0	BIT(2)  /* Enable Configurable Frequency Clock 0. */
+#define IGC_TSAUXC_ST0		BIT(4)  /* Start Clock 0 Toggle on Target Time 0. */
+#define IGC_TSAUXC_EN_CLK1	BIT(5)  /* Enable Configurable Frequency Clock 1. */
+#define IGC_TSAUXC_ST1		BIT(7)  /* Start Clock 1 Toggle on Target Time 1. */
+#define IGC_TSAUXC_EN_TS0	BIT(8)  /* Enable hardware timestamp 0. */
+#define IGC_TSAUXC_AUTT0	BIT(9)  /* Auxiliary Timestamp Taken. */
+#define IGC_TSAUXC_EN_TS1	BIT(10) /* Enable hardware timestamp 0. */
+#define IGC_TSAUXC_AUTT1	BIT(11) /* Auxiliary Timestamp Taken. */
+#define IGC_TSAUXC_PLSG		BIT(17) /* Generate a pulse. */
+#define IGC_TSAUXC_DISABLE1	BIT(27) /* Disable SYSTIM0 Count Operation. */
+#define IGC_TSAUXC_DISABLE2	BIT(28) /* Disable SYSTIM1 Count Operation. */
+#define IGC_TSAUXC_DISABLE3	BIT(29) /* Disable SYSTIM2 Count Operation. */
+#define IGC_TSAUXC_DIS_TS_CLEAR	BIT(30) /* Disable EN_TT0/1 auto clear. */
+#define IGC_TSAUXC_DISABLE0	BIT(31) /* Disable SYSTIM0 Count Operation. */
+
+/* SDP Configuration Bits */
+#define IGC_AUX0_SEL_SDP0	(0u << 0)  /* Assign SDP0 to auxiliary time stamp 0. */
+#define IGC_AUX0_SEL_SDP1	(1u << 0)  /* Assign SDP1 to auxiliary time stamp 0. */
+#define IGC_AUX0_SEL_SDP2	(2u << 0)  /* Assign SDP2 to auxiliary time stamp 0. */
+#define IGC_AUX0_SEL_SDP3	(3u << 0)  /* Assign SDP3 to auxiliary time stamp 0. */
+#define IGC_AUX0_TS_SDP_EN	(1u << 2)  /* Enable auxiliary time stamp trigger 0. */
+#define IGC_AUX1_SEL_SDP0	(0u << 3)  /* Assign SDP0 to auxiliary time stamp 1. */
+#define IGC_AUX1_SEL_SDP1	(1u << 3)  /* Assign SDP1 to auxiliary time stamp 1. */
+#define IGC_AUX1_SEL_SDP2	(2u << 3)  /* Assign SDP2 to auxiliary time stamp 1. */
+#define IGC_AUX1_SEL_SDP3	(3u << 3)  /* Assign SDP3 to auxiliary time stamp 1. */
+#define IGC_AUX1_TS_SDP_EN	(1u << 5)  /* Enable auxiliary time stamp trigger 1. */
+#define IGC_TS_SDP0_SEL_TT0	(0u << 6)  /* Target time 0 is output on SDP0. */
+#define IGC_TS_SDP0_SEL_TT1	(1u << 6)  /* Target time 1 is output on SDP0. */
+#define IGC_TS_SDP0_SEL_FC0	(2u << 6)  /* Freq clock  0 is output on SDP0. */
+#define IGC_TS_SDP0_SEL_FC1	(3u << 6)  /* Freq clock  1 is output on SDP0. */
+#define IGC_TS_SDP0_EN		(1u << 8)  /* SDP0 is assigned to Tsync. */
+#define IGC_TS_SDP1_SEL_TT0	(0u << 9)  /* Target time 0 is output on SDP1. */
+#define IGC_TS_SDP1_SEL_TT1	(1u << 9)  /* Target time 1 is output on SDP1. */
+#define IGC_TS_SDP1_SEL_FC0	(2u << 9)  /* Freq clock  0 is output on SDP1. */
+#define IGC_TS_SDP1_SEL_FC1	(3u << 9)  /* Freq clock  1 is output on SDP1. */
+#define IGC_TS_SDP1_EN		(1u << 11) /* SDP1 is assigned to Tsync. */
+#define IGC_TS_SDP2_SEL_TT0	(0u << 12) /* Target time 0 is output on SDP2. */
+#define IGC_TS_SDP2_SEL_TT1	(1u << 12) /* Target time 1 is output on SDP2. */
+#define IGC_TS_SDP2_SEL_FC0	(2u << 12) /* Freq clock  0 is output on SDP2. */
+#define IGC_TS_SDP2_SEL_FC1	(3u << 12) /* Freq clock  1 is output on SDP2. */
+#define IGC_TS_SDP2_EN		(1u << 14) /* SDP2 is assigned to Tsync. */
+#define IGC_TS_SDP3_SEL_TT0	(0u << 15) /* Target time 0 is output on SDP3. */
+#define IGC_TS_SDP3_SEL_TT1	(1u << 15) /* Target time 1 is output on SDP3. */
+#define IGC_TS_SDP3_SEL_FC0	(2u << 15) /* Freq clock  0 is output on SDP3. */
+#define IGC_TS_SDP3_SEL_FC1	(3u << 15) /* Freq clock  1 is output on SDP3. */
+#define IGC_TS_SDP3_EN		(1u << 17) /* SDP3 is assigned to Tsync. */
+
+/* Transmit Scheduling */
+#define IGC_TQAVCTRL_TRANSMIT_MODE_TSN	0x00000001
+#define IGC_TQAVCTRL_ENHANCED_QAV	0x00000008
+#define IGC_TQAVCTRL_FUTSCDDIS		0x00000080
+
+#define IGC_TXQCTL_QUEUE_MODE_LAUNCHT	0x00000001
+#define IGC_TXQCTL_STRICT_CYCLE		0x00000002
+#define IGC_TXQCTL_STRICT_END		0x00000004
+#define IGC_TXQCTL_QAV_SEL_MASK		0x000000C0
+#define IGC_TXQCTL_QAV_SEL_CBS0		0x00000080
+#define IGC_TXQCTL_QAV_SEL_CBS1		0x000000C0
+
+#define IGC_TQAVCC_IDLESLOPE_MASK	0xFFFF
+#define IGC_TQAVCC_KEEP_CREDITS		BIT(30)
+
+#define IGC_MAX_SR_QUEUES		2
+
+/* Receive Checksum Control */
+#define IGC_RXCSUM_CRCOFL	0x00000800   /* CRC32 offload enable */
+#define IGC_RXCSUM_PCSD		0x00002000   /* packet checksum disabled */
+
+/* PCIe PTM Control */
+#define IGC_PTM_CTRL_START_NOW	BIT(29) /* Start PTM Now */
+#define IGC_PTM_CTRL_EN		BIT(30) /* Enable PTM */
+#define IGC_PTM_CTRL_TRIG	BIT(31) /* PTM Cycle trigger */
+#define IGC_PTM_CTRL_SHRT_CYC(usec)	(((usec) & 0x2f) << 2)
+#define IGC_PTM_CTRL_PTM_TO(usec)	(((usec) & 0xff) << 8)
+
+#define IGC_PTM_SHORT_CYC_DEFAULT	10  /* Default Short/interrupted cycle interval */
+#define IGC_PTM_CYC_TIME_DEFAULT	5   /* Default PTM cycle time */
+#define IGC_PTM_TIMEOUT_DEFAULT		255 /* Default timeout for PTM errors */
+
+/* PCIe Digital Delay */
+#define IGC_PCIE_DIG_DELAY_DEFAULT	0x01440000
+
+/* PCIe PHY Delay */
+#define IGC_PCIE_PHY_DELAY_DEFAULT	0x40900000
+
+#define IGC_TIMADJ_ADJUST_METH		0x40000000
+
+/* PCIe PTM Status */
+#define IGC_PTM_STAT_VALID		BIT(0) /* PTM Status */
+#define IGC_PTM_STAT_RET_ERR		BIT(1) /* Root port timeout */
+#define IGC_PTM_STAT_BAD_PTM_RES	BIT(2) /* PTM Response msg instead of PTM Response Data */
+#define IGC_PTM_STAT_T4M1_OVFL		BIT(3) /* T4 minus T1 overflow */
+#define IGC_PTM_STAT_ADJUST_1ST		BIT(4) /* 1588 timer adjusted during 1st PTM cycle */
+#define IGC_PTM_STAT_ADJUST_CYC		BIT(5) /* 1588 timer adjusted during non-1st PTM cycle */
+
+/* PCIe PTM Cycle Control */
+#define IGC_PTM_CYCLE_CTRL_CYC_TIME(msec)	((msec) & 0x3ff) /* PTM Cycle Time (msec) */
+#define IGC_PTM_CYCLE_CTRL_AUTO_CYC_EN		BIT(31) /* PTM Cycle Control */
+
+/* GPY211 - I225 defines */
+#define GPY_MMD_MASK		0xFFFF0000
+#define GPY_MMD_SHIFT		16
+#define GPY_REG_MASK		0x0000FFFF
+
+#define IGC_MMDAC_FUNC_DATA	0x4000 /* Data, no post increment */
+
+/* MAC definitions */
+#define IGC_FACTPS_MNGCG	0x20000000
+#define IGC_FWSM_MODE_MASK	0xE
+#define IGC_FWSM_MODE_SHIFT	1
+
+/* Management Control */
+#define IGC_MANC_SMBUS_EN	0x00000001 /* SMBus Enabled - RO */
+#define IGC_MANC_ASF_EN		0x00000002 /* ASF Enabled - RO */
+
+/* PHY */
+#define PHY_REVISION_MASK	0xFFFFFFF0
+#define MAX_PHY_REG_ADDRESS	0x1F  /* 5 bit address bus (0-0x1F) */
+#define IGC_GEN_POLL_TIMEOUT	1920
+
+/* PHY Control Register */
+#define MII_CR_RESTART_AUTO_NEG	0x0200  /* Restart auto negotiation */
+#define MII_CR_POWER_DOWN	0x0800  /* Power down */
+#define MII_CR_AUTO_NEG_EN	0x1000  /* Auto Neg Enable */
+
+/* PHY Status Register */
+#define MII_SR_LINK_STATUS	0x0004 /* Link Status 1 = link */
+#define MII_SR_AUTONEG_COMPLETE	0x0020 /* Auto Neg Complete */
+#define IGC_PHY_RST_COMP	0x0100 /* Internal PHY reset completion */
+
+/* PHY 1000 MII Register/Bit Definitions */
+/* PHY Registers defined by IEEE */
+#define PHY_CONTROL		0x00 /* Control Register */
+#define PHY_STATUS		0x01 /* Status Register */
+#define PHY_ID1			0x02 /* Phy Id Reg (word 1) */
+#define PHY_ID2			0x03 /* Phy Id Reg (word 2) */
+#define PHY_AUTONEG_ADV		0x04 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY		0x05 /* Link Partner Ability (Base Page) */
+#define PHY_1000T_CTRL		0x09 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS	0x0A /* 1000Base-T Status Reg */
+
+/* MDI Control */
+#define IGC_MDIC_DATA_MASK	0x0000FFFF
+#define IGC_MDIC_REG_MASK	0x001F0000
+#define IGC_MDIC_REG_SHIFT	16
+#define IGC_MDIC_PHY_MASK	0x03E00000
+#define IGC_MDIC_PHY_SHIFT	21
+#define IGC_MDIC_OP_WRITE	0x04000000
+#define IGC_MDIC_OP_READ	0x08000000
+#define IGC_MDIC_READY		0x10000000
+#define IGC_MDIC_ERROR		0x40000000
+
+#define IGC_N0_QUEUE		-1
+
+#define IGC_MAX_MAC_HDR_LEN	127
+#define IGC_MAX_NETWORK_HDR_LEN	511
+
+#define IGC_VLANPQF_QSEL(_n, q_idx) ((q_idx) << ((_n) * 4))
+#define IGC_VLANPQF_VALID(_n)	(0x1 << (3 + (_n) * 4))
+#define IGC_VLANPQF_QUEUE_MASK	0x03
+
+#define IGC_ADVTXD_MACLEN_SHIFT		9  /* Adv ctxt desc mac len shift */
+#define IGC_ADVTXD_TUCMD_IPV4		0x00000400  /* IP Packet Type:1=IPv4 */
+#define IGC_ADVTXD_TUCMD_L4T_TCP	0x00000800  /* L4 Packet Type of TCP */
+#define IGC_ADVTXD_TUCMD_L4T_SCTP	0x00001000 /* L4 packet TYPE of SCTP */
+
+/* Maximum size of the MTA register table in all supported adapters */
+#define MAX_MTA_REG			128
+
+/* EEE defines */
+#define IGC_IPCNFG_EEE_2_5G_AN		0x00000010 /* IPCNFG EEE Ena 2.5G AN */
+#define IGC_IPCNFG_EEE_1G_AN		0x00000008 /* IPCNFG EEE Ena 1G AN */
+#define IGC_IPCNFG_EEE_100M_AN		0x00000004 /* IPCNFG EEE Ena 100M AN */
+#define IGC_EEER_EEE_NEG		0x20000000 /* EEE capability nego */
+#define IGC_EEER_TX_LPI_EN		0x00010000 /* EEER Tx LPI Enable */
+#define IGC_EEER_RX_LPI_EN		0x00020000 /* EEER Rx LPI Enable */
+#define IGC_EEER_LPI_FC			0x00040000 /* EEER Ena on Flow Cntrl */
+#define IGC_EEE_SU_LPI_CLK_STP		0x00800000 /* EEE LPI Clock Stop */
+
+/* LTR defines */
+#define IGC_LTRC_EEEMS_EN		0x00000020 /* Enable EEE LTR max send */
+#define IGC_RXPBS_SIZE_I225_MASK	0x0000003F /* Rx packet buffer size */
+#define IGC_TW_SYSTEM_1000_MASK		0x000000FF
+/* Minimum time for 100BASE-T where no data will be transmit following move out
+ * of EEE LPI Tx state
+ */
+#define IGC_TW_SYSTEM_100_MASK		0x0000FF00
+#define IGC_TW_SYSTEM_100_SHIFT		8
+#define IGC_DMACR_DMAC_EN		0x80000000 /* Enable DMA Coalescing */
+#define IGC_DMACR_DMACTHR_MASK		0x00FF0000
+#define IGC_DMACR_DMACTHR_SHIFT		16
+/* Reg val to set scale to 1024 nsec */
+#define IGC_LTRMINV_SCALE_1024		2
+/* Reg val to set scale to 32768 nsec */
+#define IGC_LTRMINV_SCALE_32768		3
+/* Reg val to set scale to 1024 nsec */
+#define IGC_LTRMAXV_SCALE_1024		2
+/* Reg val to set scale to 32768 nsec */
+#define IGC_LTRMAXV_SCALE_32768		3
+#define IGC_LTRMINV_LTRV_MASK		0x000003FF /* LTR minimum value */
+#define IGC_LTRMAXV_LTRV_MASK		0x000003FF /* LTR maximum value */
+#define IGC_LTRMINV_LSNP_REQ		0x00008000 /* LTR Snoop Requirement */
+#define IGC_LTRMINV_SCALE_SHIFT		10
+#define IGC_LTRMAXV_LSNP_REQ		0x00008000 /* LTR Snoop Requirement */
+#define IGC_LTRMAXV_SCALE_SHIFT		10
+
+#endif /* _IGC_DEFINES_H_ */