Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 304 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/igc/igc_tsn.c b/drivers/net/ethernet/intel/igc/igc_tsn.c
new file mode 100644
index 000000000..a386c8d61
--- /dev/null
+++ b/drivers/net/ethernet/intel/igc/igc_tsn.c
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c)  2019 Intel Corporation */
+
+#include "igc.h"
+#include "igc_hw.h"
+#include "igc_tsn.h"
+
+static bool is_any_launchtime(struct igc_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		struct igc_ring *ring = adapter->tx_ring[i];
+
+		if (ring->launchtime_enable)
+			return true;
+	}
+
+	return false;
+}
+
+static bool is_cbs_enabled(struct igc_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		struct igc_ring *ring = adapter->tx_ring[i];
+
+		if (ring->cbs_enable)
+			return true;
+	}
+
+	return false;
+}
+
+static unsigned int igc_tsn_new_flags(struct igc_adapter *adapter)
+{
+	unsigned int new_flags = adapter->flags & ~IGC_FLAG_TSN_ANY_ENABLED;
+
+	if (adapter->qbv_enable)
+		new_flags |= IGC_FLAG_TSN_QBV_ENABLED;
+
+	if (is_any_launchtime(adapter))
+		new_flags |= IGC_FLAG_TSN_QBV_ENABLED;
+
+	if (is_cbs_enabled(adapter))
+		new_flags |= IGC_FLAG_TSN_QAV_ENABLED;
+
+	return new_flags;
+}
+
+void igc_tsn_adjust_txtime_offset(struct igc_adapter *adapter)
+{
+	struct igc_hw *hw = &adapter->hw;
+	u16 txoffset;
+
+	if (!is_any_launchtime(adapter))
+		return;
+
+	switch (adapter->link_speed) {
+	case SPEED_10:
+		txoffset = IGC_TXOFFSET_SPEED_10;
+		break;
+	case SPEED_100:
+		txoffset = IGC_TXOFFSET_SPEED_100;
+		break;
+	case SPEED_1000:
+		txoffset = IGC_TXOFFSET_SPEED_1000;
+		break;
+	case SPEED_2500:
+		txoffset = IGC_TXOFFSET_SPEED_2500;
+		break;
+	default:
+		txoffset = 0;
+		break;
+	}
+
+	wr32(IGC_GTXOFFSET, txoffset);
+}
+
+/* Returns the TSN specific registers to their default values after
+ * the adapter is reset.
+ */
+static int igc_tsn_disable_offload(struct igc_adapter *adapter)
+{
+	struct igc_hw *hw = &adapter->hw;
+	u32 tqavctrl;
+	int i;
+
+	wr32(IGC_GTXOFFSET, 0);
+	wr32(IGC_TXPBS, I225_TXPBSIZE_DEFAULT);
+	wr32(IGC_DTXMXPKTSZ, IGC_DTXMXPKTSZ_DEFAULT);
+
+	tqavctrl = rd32(IGC_TQAVCTRL);
+	tqavctrl &= ~(IGC_TQAVCTRL_TRANSMIT_MODE_TSN |
+		      IGC_TQAVCTRL_ENHANCED_QAV | IGC_TQAVCTRL_FUTSCDDIS);
+
+	wr32(IGC_TQAVCTRL, tqavctrl);
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		wr32(IGC_TXQCTL(i), 0);
+		wr32(IGC_STQT(i), 0);
+		wr32(IGC_ENDQT(i), NSEC_PER_SEC);
+	}
+
+	wr32(IGC_QBVCYCLET_S, 0);
+	wr32(IGC_QBVCYCLET, NSEC_PER_SEC);
+
+	adapter->flags &= ~IGC_FLAG_TSN_QBV_ENABLED;
+
+	return 0;
+}
+
+static int igc_tsn_enable_offload(struct igc_adapter *adapter)
+{
+	struct igc_hw *hw = &adapter->hw;
+	u32 tqavctrl, baset_l, baset_h;
+	u32 sec, nsec, cycle;
+	ktime_t base_time, systim;
+	int i;
+
+	wr32(IGC_TSAUXC, 0);
+	wr32(IGC_DTXMXPKTSZ, IGC_DTXMXPKTSZ_TSN);
+	wr32(IGC_TXPBS, IGC_TXPBSIZE_TSN);
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		struct igc_ring *ring = adapter->tx_ring[i];
+		u32 txqctl = 0;
+		u16 cbs_value;
+		u32 tqavcc;
+
+		wr32(IGC_STQT(i), ring->start_time);
+		wr32(IGC_ENDQT(i), ring->end_time);
+
+		txqctl |= IGC_TXQCTL_STRICT_CYCLE |
+			IGC_TXQCTL_STRICT_END;
+
+		if (ring->launchtime_enable)
+			txqctl |= IGC_TXQCTL_QUEUE_MODE_LAUNCHT;
+
+		/* Skip configuring CBS for Q2 and Q3 */
+		if (i > 1)
+			goto skip_cbs;
+
+		if (ring->cbs_enable) {
+			if (i == 0)
+				txqctl |= IGC_TXQCTL_QAV_SEL_CBS0;
+			else
+				txqctl |= IGC_TXQCTL_QAV_SEL_CBS1;
+
+			/* According to i225 datasheet section 7.5.2.7, we
+			 * should set the 'idleSlope' field from TQAVCC
+			 * register following the equation:
+			 *
+			 * value = link-speed   0x7736 * BW * 0.2
+			 *         ---------- *  -----------------         (E1)
+			 *          100Mbps            2.5
+			 *
+			 * Note that 'link-speed' is in Mbps.
+			 *
+			 * 'BW' is the percentage bandwidth out of full
+			 * link speed which can be found with the
+			 * following equation. Note that idleSlope here
+			 * is the parameter from this function
+			 * which is in kbps.
+			 *
+			 *     BW =     idleSlope
+			 *          -----------------                      (E2)
+			 *          link-speed * 1000
+			 *
+			 * That said, we can come up with a generic
+			 * equation to calculate the value we should set
+			 * it TQAVCC register by replacing 'BW' in E1 by E2.
+			 * The resulting equation is:
+			 *
+			 * value = link-speed * 0x7736 * idleSlope * 0.2
+			 *         -------------------------------------   (E3)
+			 *             100 * 2.5 * link-speed * 1000
+			 *
+			 * 'link-speed' is present in both sides of the
+			 * fraction so it is canceled out. The final
+			 * equation is the following:
+			 *
+			 *     value = idleSlope * 61036
+			 *             -----------------                   (E4)
+			 *                  2500000
+			 *
+			 * NOTE: For i225, given the above, we can see
+			 *       that idleslope is represented in
+			 *       40.959433 kbps units by the value at
+			 *       the TQAVCC register (2.5Gbps / 61036),
+			 *       which reduces the granularity for
+			 *       idleslope increments.
+			 *
+			 * In i225 controller, the sendSlope and loCredit
+			 * parameters from CBS are not configurable
+			 * by software so we don't do any
+			 * 'controller configuration' in respect to
+			 * these parameters.
+			 */
+			cbs_value = DIV_ROUND_UP_ULL(ring->idleslope
+						     * 61036ULL, 2500000);
+
+			tqavcc = rd32(IGC_TQAVCC(i));
+			tqavcc &= ~IGC_TQAVCC_IDLESLOPE_MASK;
+			tqavcc |= cbs_value | IGC_TQAVCC_KEEP_CREDITS;
+			wr32(IGC_TQAVCC(i), tqavcc);
+
+			wr32(IGC_TQAVHC(i),
+			     0x80000000 + ring->hicredit * 0x7735);
+		} else {
+			/* Disable any CBS for the queue */
+			txqctl &= ~(IGC_TXQCTL_QAV_SEL_MASK);
+
+			/* Set idleSlope to zero. */
+			tqavcc = rd32(IGC_TQAVCC(i));
+			tqavcc &= ~(IGC_TQAVCC_IDLESLOPE_MASK |
+				    IGC_TQAVCC_KEEP_CREDITS);
+			wr32(IGC_TQAVCC(i), tqavcc);
+
+			/* Set hiCredit to zero. */
+			wr32(IGC_TQAVHC(i), 0);
+		}
+skip_cbs:
+		wr32(IGC_TXQCTL(i), txqctl);
+	}
+
+	tqavctrl = rd32(IGC_TQAVCTRL) & ~IGC_TQAVCTRL_FUTSCDDIS;
+	tqavctrl |= IGC_TQAVCTRL_TRANSMIT_MODE_TSN | IGC_TQAVCTRL_ENHANCED_QAV;
+
+	cycle = adapter->cycle_time;
+	base_time = adapter->base_time;
+
+	nsec = rd32(IGC_SYSTIML);
+	sec = rd32(IGC_SYSTIMH);
+
+	systim = ktime_set(sec, nsec);
+	if (ktime_compare(systim, base_time) > 0) {
+		s64 n = div64_s64(ktime_sub_ns(systim, base_time), cycle);
+
+		base_time = ktime_add_ns(base_time, (n + 1) * cycle);
+	} else {
+		/* According to datasheet section 7.5.2.9.3.3, FutScdDis bit
+		 * has to be configured before the cycle time and base time.
+		 * Tx won't hang if there is a GCL is already running,
+		 * so in this case we don't need to set FutScdDis.
+		 */
+		if (igc_is_device_id_i226(hw) &&
+		    !(rd32(IGC_BASET_H) || rd32(IGC_BASET_L)))
+			tqavctrl |= IGC_TQAVCTRL_FUTSCDDIS;
+	}
+
+	wr32(IGC_TQAVCTRL, tqavctrl);
+
+	wr32(IGC_QBVCYCLET_S, cycle);
+	wr32(IGC_QBVCYCLET, cycle);
+
+	baset_h = div_s64_rem(base_time, NSEC_PER_SEC, &baset_l);
+	wr32(IGC_BASET_H, baset_h);
+
+	/* In i226, Future base time is only supported when FutScdDis bit
+	 * is enabled and only active for re-configuration.
+	 * In this case, initialize the base time with zero to create
+	 * "re-configuration" scenario then only set the desired base time.
+	 */
+	if (tqavctrl & IGC_TQAVCTRL_FUTSCDDIS)
+		wr32(IGC_BASET_L, 0);
+	wr32(IGC_BASET_L, baset_l);
+
+	return 0;
+}
+
+int igc_tsn_reset(struct igc_adapter *adapter)
+{
+	unsigned int new_flags;
+	int err = 0;
+
+	new_flags = igc_tsn_new_flags(adapter);
+
+	if (!(new_flags & IGC_FLAG_TSN_ANY_ENABLED))
+		return igc_tsn_disable_offload(adapter);
+
+	err = igc_tsn_enable_offload(adapter);
+	if (err < 0)
+		return err;
+
+	adapter->flags = new_flags;
+
+	return err;
+}
+
+int igc_tsn_offload_apply(struct igc_adapter *adapter)
+{
+	struct igc_hw *hw = &adapter->hw;
+
+	if (netif_running(adapter->netdev) && igc_is_device_id_i225(hw)) {
+		schedule_work(&adapter->reset_task);
+		return 0;
+	}
+
+	igc_tsn_reset(adapter);
+
+	return 0;
+}