Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 416 insertions, 0 deletions

diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h b/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h
new file mode 100644
index 000000000..48dbfea0a
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h
@@ -0,0 +1,416 @@
+/* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 */
+/* Copyright (c) 2015-2018 Mellanox Technologies. All rights reserved */
+
+#ifndef _MLXSW_PCI_HW_H
+#define _MLXSW_PCI_HW_H
+
+#include <linux/bitops.h>
+
+#include "item.h"
+
+#define MLXSW_PCI_BAR0_SIZE		(1024 * 1024) /* 1MB */
+#define MLXSW_PCI_PAGE_SIZE		4096
+
+#define MLXSW_PCI_CIR_BASE			0x71000
+#define MLXSW_PCI_CIR_IN_PARAM_HI		MLXSW_PCI_CIR_BASE
+#define MLXSW_PCI_CIR_IN_PARAM_LO		(MLXSW_PCI_CIR_BASE + 0x04)
+#define MLXSW_PCI_CIR_IN_MODIFIER		(MLXSW_PCI_CIR_BASE + 0x08)
+#define MLXSW_PCI_CIR_OUT_PARAM_HI		(MLXSW_PCI_CIR_BASE + 0x0C)
+#define MLXSW_PCI_CIR_OUT_PARAM_LO		(MLXSW_PCI_CIR_BASE + 0x10)
+#define MLXSW_PCI_CIR_TOKEN			(MLXSW_PCI_CIR_BASE + 0x14)
+#define MLXSW_PCI_CIR_CTRL			(MLXSW_PCI_CIR_BASE + 0x18)
+#define MLXSW_PCI_CIR_CTRL_GO_BIT		BIT(23)
+#define MLXSW_PCI_CIR_CTRL_EVREQ_BIT		BIT(22)
+#define MLXSW_PCI_CIR_CTRL_OPCODE_MOD_SHIFT	12
+#define MLXSW_PCI_CIR_CTRL_STATUS_SHIFT		24
+#define MLXSW_PCI_CIR_TIMEOUT_MSECS		1000
+
+#define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS	900000
+#define MLXSW_PCI_SW_RESET_WAIT_MSECS		200
+#define MLXSW_PCI_FW_READY			0xA1844
+#define MLXSW_PCI_FW_READY_MASK			0xFFFF
+#define MLXSW_PCI_FW_READY_MAGIC		0x5E
+
+#define MLXSW_PCI_DOORBELL_SDQ_OFFSET		0x000
+#define MLXSW_PCI_DOORBELL_RDQ_OFFSET		0x200
+#define MLXSW_PCI_DOORBELL_CQ_OFFSET		0x400
+#define MLXSW_PCI_DOORBELL_EQ_OFFSET		0x600
+#define MLXSW_PCI_DOORBELL_ARM_CQ_OFFSET	0x800
+#define MLXSW_PCI_DOORBELL_ARM_EQ_OFFSET	0xA00
+
+#define MLXSW_PCI_DOORBELL(offset, type_offset, num)	\
+	((offset) + (type_offset) + (num) * 4)
+
+#define MLXSW_PCI_CQS_MAX	96
+#define MLXSW_PCI_EQS_COUNT	2
+#define MLXSW_PCI_EQ_ASYNC_NUM	0
+#define MLXSW_PCI_EQ_COMP_NUM	1
+
+#define MLXSW_PCI_SDQS_MIN	2 /* EMAD and control traffic */
+#define MLXSW_PCI_SDQ_EMAD_INDEX	0
+#define MLXSW_PCI_SDQ_EMAD_TC	0
+#define MLXSW_PCI_SDQ_CTL_TC	3
+
+#define MLXSW_PCI_AQ_PAGES	8
+#define MLXSW_PCI_AQ_SIZE	(MLXSW_PCI_PAGE_SIZE * MLXSW_PCI_AQ_PAGES)
+#define MLXSW_PCI_WQE_SIZE	32 /* 32 bytes per element */
+#define MLXSW_PCI_CQE01_SIZE	16 /* 16 bytes per element */
+#define MLXSW_PCI_CQE2_SIZE	32 /* 32 bytes per element */
+#define MLXSW_PCI_CQE_SIZE_MAX	MLXSW_PCI_CQE2_SIZE
+#define MLXSW_PCI_EQE_SIZE	16 /* 16 bytes per element */
+#define MLXSW_PCI_WQE_COUNT	(MLXSW_PCI_AQ_SIZE / MLXSW_PCI_WQE_SIZE)
+#define MLXSW_PCI_CQE01_COUNT	(MLXSW_PCI_AQ_SIZE / MLXSW_PCI_CQE01_SIZE)
+#define MLXSW_PCI_CQE2_COUNT	(MLXSW_PCI_AQ_SIZE / MLXSW_PCI_CQE2_SIZE)
+#define MLXSW_PCI_EQE_COUNT	(MLXSW_PCI_AQ_SIZE / MLXSW_PCI_EQE_SIZE)
+#define MLXSW_PCI_EQE_UPDATE_COUNT	0x80
+
+#define MLXSW_PCI_WQE_SG_ENTRIES	3
+#define MLXSW_PCI_WQE_TYPE_ETHERNET	0xA
+
+/* pci_wqe_c
+ * If set it indicates that a completion should be reported upon
+ * execution of this descriptor.
+ */
+MLXSW_ITEM32(pci, wqe, c, 0x00, 31, 1);
+
+/* pci_wqe_lp
+ * Local Processing, set if packet should be processed by the local
+ * switch hardware:
+ * For Ethernet EMAD (Direct Route and non Direct Route) -
+ * must be set if packet destination is local device
+ * For InfiniBand CTL - must be set if packet destination is local device
+ * Otherwise it must be clear
+ * Local Process packets must not exceed the size of 2K (including payload
+ * and headers).
+ */
+MLXSW_ITEM32(pci, wqe, lp, 0x00, 30, 1);
+
+/* pci_wqe_type
+ * Packet type.
+ */
+MLXSW_ITEM32(pci, wqe, type, 0x00, 23, 4);
+
+/* pci_wqe_byte_count
+ * Size of i-th scatter/gather entry, 0 if entry is unused.
+ */
+MLXSW_ITEM16_INDEXED(pci, wqe, byte_count, 0x02, 0, 14, 0x02, 0x00, false);
+
+/* pci_wqe_address
+ * Physical address of i-th scatter/gather entry.
+ * Gather Entries must be 2Byte aligned.
+ */
+MLXSW_ITEM64_INDEXED(pci, wqe, address, 0x08, 0, 64, 0x8, 0x0, false);
+
+enum mlxsw_pci_cqe_v {
+	MLXSW_PCI_CQE_V0,
+	MLXSW_PCI_CQE_V1,
+	MLXSW_PCI_CQE_V2,
+};
+
+#define mlxsw_pci_cqe_item_helpers(name, v0, v1, v2)				\
+static inline u32 mlxsw_pci_cqe_##name##_get(enum mlxsw_pci_cqe_v v, char *cqe)	\
+{										\
+	switch (v) {								\
+	default:								\
+	case MLXSW_PCI_CQE_V0:							\
+		return mlxsw_pci_cqe##v0##_##name##_get(cqe);			\
+	case MLXSW_PCI_CQE_V1:							\
+		return mlxsw_pci_cqe##v1##_##name##_get(cqe);			\
+	case MLXSW_PCI_CQE_V2:							\
+		return mlxsw_pci_cqe##v2##_##name##_get(cqe);			\
+	}									\
+}										\
+static inline void mlxsw_pci_cqe_##name##_set(enum mlxsw_pci_cqe_v v,		\
+					      char *cqe, u32 val)		\
+{										\
+	switch (v) {								\
+	default:								\
+	case MLXSW_PCI_CQE_V0:							\
+		mlxsw_pci_cqe##v0##_##name##_set(cqe, val);			\
+		break;								\
+	case MLXSW_PCI_CQE_V1:							\
+		mlxsw_pci_cqe##v1##_##name##_set(cqe, val);			\
+		break;								\
+	case MLXSW_PCI_CQE_V2:							\
+		mlxsw_pci_cqe##v2##_##name##_set(cqe, val);			\
+		break;								\
+	}									\
+}
+
+/* pci_cqe_lag
+ * Packet arrives from a port which is a LAG
+ */
+MLXSW_ITEM32(pci, cqe0, lag, 0x00, 23, 1);
+MLXSW_ITEM32(pci, cqe12, lag, 0x00, 24, 1);
+mlxsw_pci_cqe_item_helpers(lag, 0, 12, 12);
+
+/* pci_cqe_system_port/lag_id
+ * When lag=0: System port on which the packet was received
+ * When lag=1:
+ * bits [15:4] LAG ID on which the packet was received
+ * bits [3:0] sub_port on which the packet was received
+ */
+MLXSW_ITEM32(pci, cqe, system_port, 0x00, 0, 16);
+MLXSW_ITEM32(pci, cqe0, lag_id, 0x00, 4, 12);
+MLXSW_ITEM32(pci, cqe12, lag_id, 0x00, 0, 16);
+mlxsw_pci_cqe_item_helpers(lag_id, 0, 12, 12);
+MLXSW_ITEM32(pci, cqe0, lag_subport, 0x00, 0, 4);
+MLXSW_ITEM32(pci, cqe12, lag_subport, 0x00, 16, 8);
+mlxsw_pci_cqe_item_helpers(lag_subport, 0, 12, 12);
+
+/* pci_cqe_wqe_counter
+ * WQE count of the WQEs completed on the associated dqn
+ */
+MLXSW_ITEM32(pci, cqe, wqe_counter, 0x04, 16, 16);
+
+/* pci_cqe_byte_count
+ * Byte count of received packets including additional two
+ * Reserved Bytes that are append to the end of the frame.
+ * Reserved for Send CQE.
+ */
+MLXSW_ITEM32(pci, cqe, byte_count, 0x04, 0, 14);
+
+#define MLXSW_PCI_CQE2_MIRROR_CONG_INVALID	0xFFFF
+
+/* pci_cqe_mirror_cong_high
+ * Congestion level in units of 8KB of the egress traffic class of the original
+ * packet that does mirroring to the CPU. Value of 0xFFFF means that the
+ * congestion level is invalid.
+ */
+MLXSW_ITEM32(pci, cqe2, mirror_cong_high, 0x08, 16, 4);
+
+/* pci_cqe_trap_id
+ * Trap ID that captured the packet.
+ */
+MLXSW_ITEM32(pci, cqe, trap_id, 0x08, 0, 10);
+
+/* pci_cqe_crc
+ * Length include CRC. Indicates the length field includes
+ * the packet's CRC.
+ */
+MLXSW_ITEM32(pci, cqe0, crc, 0x0C, 8, 1);
+MLXSW_ITEM32(pci, cqe12, crc, 0x0C, 9, 1);
+mlxsw_pci_cqe_item_helpers(crc, 0, 12, 12);
+
+/* pci_cqe_e
+ * CQE with Error.
+ */
+MLXSW_ITEM32(pci, cqe0, e, 0x0C, 7, 1);
+MLXSW_ITEM32(pci, cqe12, e, 0x00, 27, 1);
+mlxsw_pci_cqe_item_helpers(e, 0, 12, 12);
+
+/* pci_cqe_sr
+ * 1 - Send Queue
+ * 0 - Receive Queue
+ */
+MLXSW_ITEM32(pci, cqe0, sr, 0x0C, 6, 1);
+MLXSW_ITEM32(pci, cqe12, sr, 0x00, 26, 1);
+mlxsw_pci_cqe_item_helpers(sr, 0, 12, 12);
+
+/* pci_cqe_dqn
+ * Descriptor Queue (DQ) Number.
+ */
+MLXSW_ITEM32(pci, cqe0, dqn, 0x0C, 1, 5);
+MLXSW_ITEM32(pci, cqe12, dqn, 0x0C, 1, 6);
+mlxsw_pci_cqe_item_helpers(dqn, 0, 12, 12);
+
+/* pci_cqe_time_stamp_low
+ * Time stamp of the CQE
+ * Format according to time_stamp_type:
+ * 0: uSec - 1.024uSec (default for devices which do not support
+ * time_stamp_type). Only bits 15:0 are valid
+ * 1: FRC - Free Running Clock - units of 1nSec
+ * 2: UTC - time_stamp[37:30] = Sec
+ *	  - time_stamp[29:0] = nSec
+ * 3: Mirror_UTC. UTC time stamp of the original packet that has
+ * MIRROR_SESSION traps
+ *   - time_stamp[37:30] = Sec
+ *   - time_stamp[29:0] = nSec
+ *   Formats 0..2 are configured by
+ *   CONFIG_PROFILE.cqe_time_stamp_type for PTP traps
+ *   Format 3 is used for MIRROR_SESSION traps
+ *   Note that Spectrum does not reveal FRC, UTC and Mirror_UTC
+ */
+MLXSW_ITEM32(pci, cqe2, time_stamp_low, 0x0C, 16, 16);
+
+#define MLXSW_PCI_CQE2_MIRROR_TCLASS_INVALID	0x1F
+
+/* pci_cqe_mirror_tclass
+ * The egress traffic class of the original packet that does mirroring to the
+ * CPU. Value of 0x1F means that the traffic class is invalid.
+ */
+MLXSW_ITEM32(pci, cqe2, mirror_tclass, 0x10, 27, 5);
+
+/* pci_cqe_tx_lag
+ * The Tx port of a packet that is mirrored / sampled to the CPU is a LAG.
+ */
+MLXSW_ITEM32(pci, cqe2, tx_lag, 0x10, 24, 1);
+
+/* pci_cqe_tx_lag_subport
+ * The port index within the LAG of a packet that is mirrored / sampled to the
+ * CPU. Reserved when tx_lag is 0.
+ */
+MLXSW_ITEM32(pci, cqe2, tx_lag_subport, 0x10, 16, 8);
+
+#define MLXSW_PCI_CQE2_TX_PORT_MULTI_PORT	0xFFFE
+#define MLXSW_PCI_CQE2_TX_PORT_INVALID		0xFFFF
+
+/* pci_cqe_tx_lag_id
+ * The Tx LAG ID of the original packet that is mirrored / sampled to the CPU.
+ * Value of 0xFFFE means multi-port. Value fo 0xFFFF means that the Tx LAG ID
+ * is invalid. Reserved when tx_lag is 0.
+ */
+MLXSW_ITEM32(pci, cqe2, tx_lag_id, 0x10, 0, 16);
+
+/* pci_cqe_tx_system_port
+ * The Tx port of the original packet that is mirrored / sampled to the CPU.
+ * Value of 0xFFFE means multi-port. Value fo 0xFFFF means that the Tx port is
+ * invalid. Reserved when tx_lag is 1.
+ */
+MLXSW_ITEM32(pci, cqe2, tx_system_port, 0x10, 0, 16);
+
+/* pci_cqe_mirror_cong_low
+ * Congestion level in units of 8KB of the egress traffic class of the original
+ * packet that does mirroring to the CPU. Value of 0xFFFF means that the
+ * congestion level is invalid.
+ */
+MLXSW_ITEM32(pci, cqe2, mirror_cong_low, 0x14, 20, 12);
+
+#define MLXSW_PCI_CQE2_MIRROR_CONG_SHIFT	13	/* Units of 8KB. */
+
+static inline u16 mlxsw_pci_cqe2_mirror_cong_get(const char *cqe)
+{
+	u16 cong_high = mlxsw_pci_cqe2_mirror_cong_high_get(cqe);
+	u16 cong_low = mlxsw_pci_cqe2_mirror_cong_low_get(cqe);
+
+	return cong_high << 12 | cong_low;
+}
+
+/* pci_cqe_user_def_val_orig_pkt_len
+ * When trap_id is an ACL: User defined value from policy engine action.
+ */
+MLXSW_ITEM32(pci, cqe2, user_def_val_orig_pkt_len, 0x14, 0, 20);
+
+/* pci_cqe_mirror_reason
+ * Mirror reason.
+ */
+MLXSW_ITEM32(pci, cqe2, mirror_reason, 0x18, 24, 8);
+
+enum mlxsw_pci_cqe_time_stamp_type {
+	MLXSW_PCI_CQE_TIME_STAMP_TYPE_USEC,
+	MLXSW_PCI_CQE_TIME_STAMP_TYPE_FRC,
+	MLXSW_PCI_CQE_TIME_STAMP_TYPE_UTC,
+	MLXSW_PCI_CQE_TIME_STAMP_TYPE_MIRROR_UTC,
+};
+
+/* pci_cqe_time_stamp_type
+ * Time stamp type:
+ * 0: uSec - 1.024uSec (default for devices which do not support
+ * time_stamp_type)
+ * 1: FRC - Free Running Clock - units of 1nSec
+ * 2: UTC
+ * 3: Mirror_UTC. UTC time stamp of the original packet that has
+ * MIRROR_SESSION traps
+ */
+MLXSW_ITEM32(pci, cqe2, time_stamp_type, 0x18, 22, 2);
+
+#define MLXSW_PCI_CQE2_MIRROR_LATENCY_INVALID	0xFFFFFF
+
+/* pci_cqe_time_stamp_high
+ * Time stamp of the CQE
+ * Format according to time_stamp_type:
+ * 0: uSec - 1.024uSec (default for devices which do not support
+ * time_stamp_type). Only bits 15:0 are valid
+ * 1: FRC - Free Running Clock - units of 1nSec
+ * 2: UTC - time_stamp[37:30] = Sec
+ *	  - time_stamp[29:0] = nSec
+ * 3: Mirror_UTC. UTC time stamp of the original packet that has
+ * MIRROR_SESSION traps
+ *   - time_stamp[37:30] = Sec
+ *   - time_stamp[29:0] = nSec
+ *   Formats 0..2 are configured by
+ *   CONFIG_PROFILE.cqe_time_stamp_type for PTP traps
+ *   Format 3 is used for MIRROR_SESSION traps
+ *   Note that Spectrum does not reveal FRC, UTC and Mirror_UTC
+ */
+MLXSW_ITEM32(pci, cqe2, time_stamp_high, 0x18, 0, 22);
+
+static inline u64 mlxsw_pci_cqe2_time_stamp_get(const char *cqe)
+{
+	u64 ts_high = mlxsw_pci_cqe2_time_stamp_high_get(cqe);
+	u64 ts_low = mlxsw_pci_cqe2_time_stamp_low_get(cqe);
+
+	return ts_high << 16 | ts_low;
+}
+
+static inline u8 mlxsw_pci_cqe2_time_stamp_sec_get(const char *cqe)
+{
+	u64 full_ts = mlxsw_pci_cqe2_time_stamp_get(cqe);
+
+	return full_ts >> 30 & 0xFF;
+}
+
+static inline u32 mlxsw_pci_cqe2_time_stamp_nsec_get(const char *cqe)
+{
+	u64 full_ts = mlxsw_pci_cqe2_time_stamp_get(cqe);
+
+	return full_ts & 0x3FFFFFFF;
+}
+
+/* pci_cqe_mirror_latency
+ * End-to-end latency of the original packet that does mirroring to the CPU.
+ * Value of 0xFFFFFF means that the latency is invalid. Units are according to
+ * MOGCR.mirror_latency_units.
+ */
+MLXSW_ITEM32(pci, cqe2, mirror_latency, 0x1C, 8, 24);
+
+/* pci_cqe_owner
+ * Ownership bit.
+ */
+MLXSW_ITEM32(pci, cqe01, owner, 0x0C, 0, 1);
+MLXSW_ITEM32(pci, cqe2, owner, 0x1C, 0, 1);
+mlxsw_pci_cqe_item_helpers(owner, 01, 01, 2);
+
+/* pci_eqe_event_type
+ * Event type.
+ */
+MLXSW_ITEM32(pci, eqe, event_type, 0x0C, 24, 8);
+#define MLXSW_PCI_EQE_EVENT_TYPE_COMP	0x00
+#define MLXSW_PCI_EQE_EVENT_TYPE_CMD	0x0A
+
+/* pci_eqe_event_sub_type
+ * Event type.
+ */
+MLXSW_ITEM32(pci, eqe, event_sub_type, 0x0C, 16, 8);
+
+/* pci_eqe_cqn
+ * Completion Queue that triggered this EQE.
+ */
+MLXSW_ITEM32(pci, eqe, cqn, 0x0C, 8, 7);
+
+/* pci_eqe_owner
+ * Ownership bit.
+ */
+MLXSW_ITEM32(pci, eqe, owner, 0x0C, 0, 1);
+
+/* pci_eqe_cmd_token
+ * Command completion event - token
+ */
+MLXSW_ITEM32(pci, eqe, cmd_token, 0x00, 16, 16);
+
+/* pci_eqe_cmd_status
+ * Command completion event - status
+ */
+MLXSW_ITEM32(pci, eqe, cmd_status, 0x00, 0, 8);
+
+/* pci_eqe_cmd_out_param_h
+ * Command completion event - output parameter - higher part
+ */
+MLXSW_ITEM32(pci, eqe, cmd_out_param_h, 0x04, 0, 32);
+
+/* pci_eqe_cmd_out_param_l
+ * Command completion event - output parameter - lower part
+ */
+MLXSW_ITEM32(pci, eqe, cmd_out_param_l, 0x08, 0, 32);
+
+#endif