Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 331 insertions, 0 deletions

diff --git a/drivers/net/ethernet/moxa/moxart_ether.h b/drivers/net/ethernet/moxa/moxart_ether.h
new file mode 100644
index 000000000..bf4c3029c
--- /dev/null
+++ b/drivers/net/ethernet/moxa/moxart_ether.h
@@ -0,0 +1,331 @@
+/* MOXA ART Ethernet (RTL8201CP) driver.
+ *
+ * Copyright (C) 2013 Jonas Jensen
+ *
+ * Jonas Jensen <jonas.jensen@gmail.com>
+ *
+ * Based on code from
+ * Moxa Technology Co., Ltd. <www.moxa.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _MOXART_ETHERNET_H
+#define _MOXART_ETHERNET_H
+
+#define TX_REG_OFFSET_DESC0	0
+#define TX_REG_OFFSET_DESC1	4
+#define TX_REG_OFFSET_DESC2	8
+#define TX_REG_DESC_SIZE	16
+
+#define RX_REG_OFFSET_DESC0	0
+#define RX_REG_OFFSET_DESC1	4
+#define RX_REG_OFFSET_DESC2	8
+#define RX_REG_DESC_SIZE	16
+
+#define TX_DESC0_PKT_LATE_COL	0x1		/* abort, late collision */
+#define TX_DESC0_RX_PKT_EXS_COL	0x2		/* abort, >16 collisions */
+#define TX_DESC0_DMA_OWN	0x80000000	/* owned by controller */
+#define TX_DESC1_BUF_SIZE_MASK	0x7ff
+#define TX_DESC1_LTS		0x8000000	/* last TX packet */
+#define TX_DESC1_FTS		0x10000000	/* first TX packet */
+#define TX_DESC1_FIFO_COMPLETE	0x20000000
+#define TX_DESC1_INTR_COMPLETE	0x40000000
+#define TX_DESC1_END		0x80000000
+#define TX_DESC2_ADDRESS_PHYS	0
+#define TX_DESC2_ADDRESS_VIRT	4
+
+#define RX_DESC0_FRAME_LEN	0
+#define RX_DESC0_FRAME_LEN_MASK	0x7FF
+#define RX_DESC0_MULTICAST	0x10000
+#define RX_DESC0_BROADCAST	0x20000
+#define RX_DESC0_ERR		0x40000
+#define RX_DESC0_CRC_ERR	0x80000
+#define RX_DESC0_FTL		0x100000
+#define RX_DESC0_RUNT		0x200000	/* packet less than 64 bytes */
+#define RX_DESC0_ODD_NB		0x400000	/* receive odd nibbles */
+#define RX_DESC0_LRS		0x10000000	/* last receive segment */
+#define RX_DESC0_FRS		0x20000000	/* first receive segment */
+#define RX_DESC0_DMA_OWN	0x80000000
+#define RX_DESC1_BUF_SIZE_MASK	0x7FF
+#define RX_DESC1_END		0x80000000
+#define RX_DESC2_ADDRESS_PHYS	0
+#define RX_DESC2_ADDRESS_VIRT	4
+
+#define TX_DESC_NUM		64
+#define TX_DESC_NUM_MASK	(TX_DESC_NUM - 1)
+#define TX_NEXT(N)		(((N) + 1) & (TX_DESC_NUM_MASK))
+#define TX_BUF_SIZE		1600
+#define TX_BUF_SIZE_MAX		(TX_DESC1_BUF_SIZE_MASK + 1)
+#define TX_WAKE_THRESHOLD	16
+
+#define RX_DESC_NUM		64
+#define RX_DESC_NUM_MASK	(RX_DESC_NUM - 1)
+#define RX_NEXT(N)		(((N) + 1) & (RX_DESC_NUM_MASK))
+#define RX_BUF_SIZE		1600
+#define RX_BUF_SIZE_MAX		(RX_DESC1_BUF_SIZE_MASK + 1)
+
+#define REG_INTERRUPT_STATUS	0
+#define REG_INTERRUPT_MASK	4
+#define REG_MAC_MS_ADDRESS	8
+#define REG_MAC_LS_ADDRESS	12
+#define REG_MCAST_HASH_TABLE0	16
+#define REG_MCAST_HASH_TABLE1	20
+#define REG_TX_POLL_DEMAND	24
+#define REG_RX_POLL_DEMAND	28
+#define REG_TXR_BASE_ADDRESS	32
+#define REG_RXR_BASE_ADDRESS	36
+#define REG_INT_TIMER_CTRL	40
+#define REG_APOLL_TIMER_CTRL	44
+#define REG_DMA_BLEN_CTRL	48
+#define REG_RESERVED1		52
+#define REG_MAC_CTRL		136
+#define REG_MAC_STATUS		140
+#define REG_PHY_CTRL		144
+#define REG_PHY_WRITE_DATA	148
+#define REG_FLOW_CTRL		152
+#define REG_BACK_PRESSURE	156
+#define REG_RESERVED2		160
+#define REG_TEST_SEED		196
+#define REG_DMA_FIFO_STATE	200
+#define REG_TEST_MODE		204
+#define REG_RESERVED3		208
+#define REG_TX_COL_COUNTER	212
+#define REG_RPF_AEP_COUNTER	216
+#define REG_XM_PG_COUNTER	220
+#define REG_RUNT_TLC_COUNTER	224
+#define REG_CRC_FTL_COUNTER	228
+#define REG_RLC_RCC_COUNTER	232
+#define REG_BROC_COUNTER	236
+#define REG_MULCA_COUNTER	240
+#define REG_RP_COUNTER		244
+#define REG_XP_COUNTER		248
+
+#define REG_PHY_CTRL_OFFSET	0x0
+#define REG_PHY_STATUS		0x1
+#define REG_PHY_ID1		0x2
+#define REG_PHY_ID2		0x3
+#define REG_PHY_ANA		0x4
+#define REG_PHY_ANLPAR		0x5
+#define REG_PHY_ANE		0x6
+#define REG_PHY_ECTRL1		0x10
+#define REG_PHY_QPDS		0x11
+#define REG_PHY_10BOP		0x12
+#define REG_PHY_ECTRL2		0x13
+#define REG_PHY_FTMAC100_WRITE	0x8000000
+#define REG_PHY_FTMAC100_READ	0x4000000
+
+/* REG_INTERRUPT_STATUS */
+#define RPKT_FINISH		BIT(0)	/* DMA data received */
+#define NORXBUF			BIT(1)	/* receive buffer unavailable */
+#define XPKT_FINISH		BIT(2)	/* DMA moved data to TX FIFO */
+#define NOTXBUF			BIT(3)	/* transmit buffer unavailable */
+#define XPKT_OK_INT_STS		BIT(4)	/* transmit to ethernet success */
+#define XPKT_LOST_INT_STS	BIT(5)	/* transmit ethernet lost (collision) */
+#define RPKT_SAV		BIT(6)	/* FIFO receive success */
+#define RPKT_LOST_INT_STS	BIT(7)	/* FIFO full, receive failed */
+#define AHB_ERR			BIT(8)	/* AHB error */
+#define PHYSTS_CHG		BIT(9)	/* PHY link status change */
+
+/* REG_INTERRUPT_MASK */
+#define RPKT_FINISH_M		BIT(0)
+#define NORXBUF_M		BIT(1)
+#define XPKT_FINISH_M		BIT(2)
+#define NOTXBUF_M		BIT(3)
+#define XPKT_OK_M		BIT(4)
+#define XPKT_LOST_M		BIT(5)
+#define RPKT_SAV_M		BIT(6)
+#define RPKT_LOST_M		BIT(7)
+#define AHB_ERR_M		BIT(8)
+#define PHYSTS_CHG_M		BIT(9)
+
+/* REG_MAC_MS_ADDRESS */
+#define MAC_MADR_MASK		0xffff	/* 2 MSB MAC address */
+
+/* REG_INT_TIMER_CTRL */
+#define TXINT_TIME_SEL		BIT(15)	/* TX cycle time period */
+#define TXINT_THR_MASK		0x7000
+#define TXINT_CNT_MASK		0xf00
+#define RXINT_TIME_SEL		BIT(7)	/* RX cycle time period */
+#define RXINT_THR_MASK		0x70
+#define RXINT_CNT_MASK		0xF
+
+/* REG_APOLL_TIMER_CTRL */
+#define TXPOLL_TIME_SEL		BIT(12)	/* TX poll time period */
+#define TXPOLL_CNT_MASK		0xf00
+#define TXPOLL_CNT_SHIFT_BIT	8
+#define RXPOLL_TIME_SEL		BIT(4)	/* RX poll time period */
+#define RXPOLL_CNT_MASK		0xF
+#define RXPOLL_CNT_SHIFT_BIT	0
+
+/* REG_DMA_BLEN_CTRL */
+#define RX_THR_EN		BIT(9)	/* RX FIFO threshold arbitration */
+#define RXFIFO_HTHR_MASK	0x1c0
+#define RXFIFO_LTHR_MASK	0x38
+#define INCR16_EN		BIT(2)	/* AHB bus INCR16 burst command */
+#define INCR8_EN		BIT(1)	/* AHB bus INCR8 burst command */
+#define INCR4_EN		BIT(0)	/* AHB bus INCR4 burst command */
+
+/* REG_MAC_CTRL */
+#define RX_BROADPKT		BIT(17)	/* receive broadcast packets */
+#define RX_MULTIPKT		BIT(16)	/* receive all multicast packets */
+#define FULLDUP			BIT(15)	/* full duplex */
+#define CRC_APD			BIT(14)	/* append CRC to transmitted packet */
+#define RCV_ALL			BIT(12)	/* ignore incoming packet destination */
+#define RX_FTL			BIT(11)	/* accept packets larger than 1518 B */
+#define RX_RUNT			BIT(10)	/* accept packets smaller than 64 B */
+#define HT_MULTI_EN		BIT(9)	/* accept on hash and mcast pass */
+#define RCV_EN			BIT(8)	/* receiver enable */
+#define ENRX_IN_HALFTX		BIT(6)	/* enable receive in half duplex mode */
+#define XMT_EN			BIT(5)	/* transmit enable */
+#define CRC_DIS			BIT(4)	/* disable CRC check when receiving */
+#define LOOP_EN			BIT(3)	/* internal loop-back */
+#define SW_RST			BIT(2)	/* software reset, last 64 AHB clocks */
+#define RDMA_EN			BIT(1)	/* enable receive DMA chan */
+#define XDMA_EN			BIT(0)	/* enable transmit DMA chan */
+
+/* REG_MAC_STATUS */
+#define COL_EXCEED		BIT(11)	/* more than 16 collisions */
+#define LATE_COL		BIT(10)	/* transmit late collision detected */
+#define XPKT_LOST		BIT(9)	/* transmit to ethernet lost */
+#define XPKT_OK			BIT(8)	/* transmit to ethernet success */
+#define RUNT_MAC_STS		BIT(7)	/* receive runt detected */
+#define FTL_MAC_STS		BIT(6)	/* receive frame too long detected */
+#define CRC_ERR_MAC_STS		BIT(5)
+#define RPKT_LOST		BIT(4)	/* RX FIFO full, receive failed */
+#define RPKT_SAVE		BIT(3)	/* RX FIFO receive success */
+#define COL			BIT(2)	/* collision, incoming packet dropped */
+#define MCPU_BROADCAST		BIT(1)
+#define MCPU_MULTICAST		BIT(0)
+
+/* REG_PHY_CTRL */
+#define MIIWR			BIT(27)	/* init write sequence (auto cleared)*/
+#define MIIRD			BIT(26)
+#define REGAD_MASK		0x3e00000
+#define PHYAD_MASK		0x1f0000
+#define MIIRDATA_MASK		0xffff
+
+/* REG_PHY_WRITE_DATA */
+#define MIIWDATA_MASK		0xffff
+
+/* REG_FLOW_CTRL */
+#define PAUSE_TIME_MASK		0xffff0000
+#define FC_HIGH_MASK		0xf000
+#define FC_LOW_MASK		0xf00
+#define RX_PAUSE		BIT(4)	/* receive pause frame */
+#define TX_PAUSED		BIT(3)	/* transmit pause due to receive */
+#define FCTHR_EN		BIT(2)	/* enable threshold mode. */
+#define TX_PAUSE		BIT(1)	/* transmit pause frame */
+#define FC_EN			BIT(0)	/* flow control mode enable */
+
+/* REG_BACK_PRESSURE */
+#define BACKP_LOW_MASK		0xf00
+#define BACKP_JAM_LEN_MASK	0xf0
+#define BACKP_MODE		BIT(1)	/* address mode */
+#define BACKP_ENABLE		BIT(0)
+
+/* REG_TEST_SEED */
+#define TEST_SEED_MASK		0x3fff
+
+/* REG_DMA_FIFO_STATE */
+#define TX_DMA_REQUEST		BIT(31)
+#define RX_DMA_REQUEST		BIT(30)
+#define TX_DMA_GRANT		BIT(29)
+#define RX_DMA_GRANT		BIT(28)
+#define TX_FIFO_EMPTY		BIT(27)
+#define RX_FIFO_EMPTY		BIT(26)
+#define TX_DMA2_SM_MASK		0x7000
+#define TX_DMA1_SM_MASK		0xf00
+#define RX_DMA2_SM_MASK		0x70
+#define RX_DMA1_SM_MASK		0xF
+
+/* REG_TEST_MODE */
+#define SINGLE_PKT		BIT(26)	/* single packet mode */
+#define PTIMER_TEST		BIT(25)	/* automatic polling timer test mode */
+#define ITIMER_TEST		BIT(24)	/* interrupt timer test mode */
+#define TEST_SEED_SELECT	BIT(22)
+#define SEED_SELECT		BIT(21)
+#define TEST_MODE		BIT(20)
+#define TEST_TIME_MASK		0xffc00
+#define TEST_EXCEL_MASK		0x3e0
+
+/* REG_TX_COL_COUNTER */
+#define TX_MCOL_MASK		0xffff0000
+#define TX_MCOL_SHIFT_BIT	16
+#define TX_SCOL_MASK		0xffff
+#define TX_SCOL_SHIFT_BIT	0
+
+/* REG_RPF_AEP_COUNTER */
+#define RPF_MASK		0xffff0000
+#define RPF_SHIFT_BIT		16
+#define AEP_MASK		0xffff
+#define AEP_SHIFT_BIT		0
+
+/* REG_XM_PG_COUNTER */
+#define XM_MASK			0xffff0000
+#define XM_SHIFT_BIT		16
+#define PG_MASK			0xffff
+#define PG_SHIFT_BIT		0
+
+/* REG_RUNT_TLC_COUNTER */
+#define RUNT_CNT_MASK		0xffff0000
+#define RUNT_CNT_SHIFT_BIT	16
+#define TLCC_MASK		0xffff
+#define TLCC_SHIFT_BIT		0
+
+/* REG_CRC_FTL_COUNTER */
+#define CRCER_CNT_MASK		0xffff0000
+#define CRCER_CNT_SHIFT_BIT	16
+#define FTL_CNT_MASK		0xffff
+#define FTL_CNT_SHIFT_BIT	0
+
+/* REG_RLC_RCC_COUNTER */
+#define RLC_MASK		0xffff0000
+#define RLC_SHIFT_BIT		16
+#define RCC_MASK		0xffff
+#define RCC_SHIFT_BIT		0
+
+/* REG_PHY_STATUS */
+#define AN_COMPLETE		0x20
+#define LINK_STATUS		0x4
+
+struct moxart_mac_priv_t {
+	struct platform_device *pdev;
+	void __iomem *base;
+	unsigned int reg_maccr;
+	unsigned int reg_imr;
+	struct napi_struct napi;
+	struct net_device *ndev;
+
+	dma_addr_t rx_base;
+	dma_addr_t rx_mapping[RX_DESC_NUM];
+	void *rx_desc_base;
+	unsigned char *rx_buf_base;
+	unsigned char *rx_buf[RX_DESC_NUM];
+	unsigned int rx_head;
+	unsigned int rx_buf_size;
+
+	dma_addr_t tx_base;
+	dma_addr_t tx_mapping[TX_DESC_NUM];
+	void *tx_desc_base;
+	unsigned char *tx_buf_base;
+	unsigned char *tx_buf[RX_DESC_NUM];
+	unsigned int tx_head;
+	unsigned int tx_buf_size;
+
+	spinlock_t txlock;
+	unsigned int tx_len[TX_DESC_NUM];
+	struct sk_buff *tx_skb[TX_DESC_NUM];
+	unsigned int tx_tail;
+};
+
+#if TX_BUF_SIZE >= TX_BUF_SIZE_MAX
+#error MOXA ART Ethernet device driver TX buffer is too large!
+#endif
+#if RX_BUF_SIZE >= RX_BUF_SIZE_MAX
+#error MOXA ART Ethernet device driver RX buffer is too large!
+#endif
+
+#endif