Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 513 insertions, 0 deletions

diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev_api.h b/drivers/net/ethernet/qlogic/qed/qed_dev_api.h
new file mode 100644
index 000000000..f8682356d
--- /dev/null
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev_api.h
@@ -0,0 +1,513 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
+/* QLogic qed NIC Driver
+ * Copyright (c) 2015-2017  QLogic Corporation
+ * Copyright (c) 2019-2020 Marvell International Ltd.
+ */
+
+#ifndef _QED_DEV_API_H
+#define _QED_DEV_API_H
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/qed/qed_chain.h>
+#include <linux/qed/qed_if.h>
+#include "qed_int.h"
+
+/**
+ * qed_init_dp(): Initialize the debug level.
+ *
+ * @cdev: Qed dev pointer.
+ * @dp_module: Module debug parameter.
+ * @dp_level: Module debug level.
+ *
+ * Return: Void.
+ */
+void qed_init_dp(struct qed_dev *cdev,
+		 u32 dp_module,
+		 u8 dp_level);
+
+/**
+ * qed_init_struct(): Initialize the device structure to
+ *                    its defaults.
+ *
+ * @cdev: Qed dev pointer.
+ *
+ * Return: Void.
+ */
+void qed_init_struct(struct qed_dev *cdev);
+
+/**
+ * qed_resc_free: Free device resources.
+ *
+ * @cdev: Qed dev pointer.
+ *
+ * Return: Void.
+ */
+void qed_resc_free(struct qed_dev *cdev);
+
+/**
+ * qed_resc_alloc(): Alloc device resources.
+ *
+ * @cdev: Qed dev pointer.
+ *
+ * Return: Int.
+ */
+int qed_resc_alloc(struct qed_dev *cdev);
+
+/**
+ * qed_resc_setup(): Setup device resources.
+ *
+ * @cdev: Qed dev pointer.
+ *
+ * Return: Void.
+ */
+void qed_resc_setup(struct qed_dev *cdev);
+
+enum qed_override_force_load {
+	QED_OVERRIDE_FORCE_LOAD_NONE,
+	QED_OVERRIDE_FORCE_LOAD_ALWAYS,
+	QED_OVERRIDE_FORCE_LOAD_NEVER,
+};
+
+struct qed_drv_load_params {
+	/* Indicates whether the driver is running over a crash kernel.
+	 * As part of the load request, this will be used for providing the
+	 * driver role to the MFW.
+	 * In case of a crash kernel over PDA - this should be set to false.
+	 */
+	bool is_crash_kernel;
+
+	/* The timeout value that the MFW should use when locking the engine for
+	 * the driver load process.
+	 * A value of '0' means the default value, and '255' means no timeout.
+	 */
+	u8 mfw_timeout_val;
+#define QED_LOAD_REQ_LOCK_TO_DEFAULT    0
+#define QED_LOAD_REQ_LOCK_TO_NONE       255
+
+	/* Avoid engine reset when first PF loads on it */
+	bool avoid_eng_reset;
+
+	/* Allow overriding the default force load behavior */
+	enum qed_override_force_load override_force_load;
+};
+
+struct qed_hw_init_params {
+	/* Tunneling parameters */
+	struct qed_tunnel_info *p_tunn;
+
+	bool b_hw_start;
+
+	/* Interrupt mode [msix, inta, etc.] to use */
+	enum qed_int_mode int_mode;
+
+	/* NPAR tx switching to be used for vports for tx-switching */
+	bool allow_npar_tx_switch;
+
+	/* Binary fw data pointer in binary fw file */
+	const u8 *bin_fw_data;
+
+	/* Driver load parameters */
+	struct qed_drv_load_params *p_drv_load_params;
+};
+
+/**
+ * qed_hw_init(): Init Qed hardware.
+ *
+ * @cdev: Qed dev pointer.
+ * @p_params: Pointers to params.
+ *
+ * Return: Int.
+ */
+int qed_hw_init(struct qed_dev *cdev, struct qed_hw_init_params *p_params);
+
+/**
+ * qed_hw_timers_stop_all(): Stop the timers HW block.
+ *
+ * @cdev: Qed dev pointer.
+ *
+ * Return: void.
+ */
+void qed_hw_timers_stop_all(struct qed_dev *cdev);
+
+/**
+ * qed_hw_stop(): Stop Qed hardware.
+ *
+ * @cdev: Qed dev pointer.
+ *
+ * Return: int.
+ */
+int qed_hw_stop(struct qed_dev *cdev);
+
+/**
+ * qed_hw_stop_fastpath(): Should be called incase
+ *		           slowpath is still required for the device,
+ *		           but fastpath is not.
+ *
+ * @cdev: Qed dev pointer.
+ *
+ * Return: Int.
+ */
+int qed_hw_stop_fastpath(struct qed_dev *cdev);
+
+/**
+ * qed_hw_start_fastpath(): Restart fastpath traffic,
+ *		            only if hw_stop_fastpath was called.
+ *
+ * @p_hwfn: HW device data.
+ *
+ * Return: Int.
+ */
+int qed_hw_start_fastpath(struct qed_hwfn *p_hwfn);
+
+/**
+ * qed_hw_prepare(): Prepare Qed hardware.
+ *
+ * @cdev: Qed dev pointer.
+ * @personality: Personality to initialize.
+ *
+ * Return: Int.
+ */
+int qed_hw_prepare(struct qed_dev *cdev,
+		   int personality);
+
+/**
+ * qed_hw_remove(): Remove Qed hardware.
+ *
+ * @cdev: Qed dev pointer.
+ *
+ * Return: Void.
+ */
+void qed_hw_remove(struct qed_dev *cdev);
+
+/**
+ * qed_ptt_acquire(): Allocate a PTT window.
+ *
+ * @p_hwfn: HW device data.
+ *
+ * Return: struct qed_ptt.
+ *
+ * Should be called at the entry point to the driver (at the beginning of an
+ * exported function).
+ */
+struct qed_ptt *qed_ptt_acquire(struct qed_hwfn *p_hwfn);
+
+/**
+ * qed_ptt_release(): Release PTT Window.
+ *
+ * @p_hwfn: HW device data.
+ * @p_ptt: P_ptt.
+ *
+ * Return: Void.
+ *
+ * Should be called at the end of a flow - at the end of the function that
+ * acquired the PTT.
+ */
+void qed_ptt_release(struct qed_hwfn *p_hwfn,
+		     struct qed_ptt *p_ptt);
+void qed_reset_vport_stats(struct qed_dev *cdev);
+
+enum qed_dmae_address_type_t {
+	QED_DMAE_ADDRESS_HOST_VIRT,
+	QED_DMAE_ADDRESS_HOST_PHYS,
+	QED_DMAE_ADDRESS_GRC
+};
+
+/**
+ * qed_dmae_host2grc(): Copy data from source addr to
+ *                      dmae registers using the given ptt.
+ *
+ * @p_hwfn: HW device data.
+ * @p_ptt: P_ptt.
+ * @source_addr: Source address.
+ * @grc_addr: GRC address (dmae_data_offset).
+ * @size_in_dwords: Size.
+ * @p_params: (default parameters will be used in case of NULL).
+ *
+ * Return: Int.
+ */
+int
+qed_dmae_host2grc(struct qed_hwfn *p_hwfn,
+		  struct qed_ptt *p_ptt,
+		  u64 source_addr,
+		  u32 grc_addr,
+		  u32 size_in_dwords,
+		  struct qed_dmae_params *p_params);
+
+ /**
+ * qed_dmae_grc2host(): Read data from dmae data offset
+ *                      to source address using the given ptt.
+ *
+ * @p_ptt: P_ptt.
+ * @grc_addr: GRC address (dmae_data_offset).
+ * @dest_addr: Destination Address.
+ * @size_in_dwords: Size.
+ * @p_params: (default parameters will be used in case of NULL).
+ *
+ * Return: Int.
+ */
+int qed_dmae_grc2host(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+		      u32 grc_addr, dma_addr_t dest_addr, u32 size_in_dwords,
+		      struct qed_dmae_params *p_params);
+
+/**
+ * qed_dmae_host2host(): Copy data from to source address
+ *                       to a destination adrress (for SRIOV) using the given
+ *                       ptt.
+ *
+ * @p_hwfn: HW device data.
+ * @p_ptt: P_ptt.
+ * @source_addr: Source address.
+ * @dest_addr: Destination address.
+ * @size_in_dwords: size.
+ * @p_params: (default parameters will be used in case of NULL).
+ *
+ * Return: Int.
+ */
+int qed_dmae_host2host(struct qed_hwfn *p_hwfn,
+		       struct qed_ptt *p_ptt,
+		       dma_addr_t source_addr,
+		       dma_addr_t dest_addr,
+		       u32 size_in_dwords, struct qed_dmae_params *p_params);
+
+int qed_chain_alloc(struct qed_dev *cdev, struct qed_chain *chain,
+		    struct qed_chain_init_params *params);
+void qed_chain_free(struct qed_dev *cdev, struct qed_chain *chain);
+
+/**
+ * qed_fw_l2_queue(): Get absolute L2 queue ID.
+ *
+ * @p_hwfn: HW device data.
+ * @src_id: Relative to p_hwfn.
+ * @dst_id: Absolute per engine.
+ *
+ * Return: Int.
+ */
+int qed_fw_l2_queue(struct qed_hwfn *p_hwfn,
+		    u16 src_id,
+		    u16 *dst_id);
+
+/**
+ * qed_fw_vport(): Get absolute vport ID.
+ *
+ * @p_hwfn: HW device data.
+ * @src_id: Relative to p_hwfn.
+ * @dst_id: Absolute per engine.
+ *
+ * Return: Int.
+ */
+int qed_fw_vport(struct qed_hwfn *p_hwfn,
+		 u8 src_id,
+		 u8 *dst_id);
+
+/**
+ * qed_fw_rss_eng(): Get absolute RSS engine ID.
+ *
+ * @p_hwfn: HW device data.
+ * @src_id: Relative to p_hwfn.
+ * @dst_id: Absolute per engine.
+ *
+ * Return: Int.
+ */
+int qed_fw_rss_eng(struct qed_hwfn *p_hwfn,
+		   u8 src_id,
+		   u8 *dst_id);
+
+/**
+ * qed_llh_get_num_ppfid(): Return the allocated number of LLH filter
+ *	                    banks that are allocated to the PF.
+ *
+ * @cdev: Qed dev pointer.
+ *
+ * Return: u8 Number of LLH filter banks.
+ */
+u8 qed_llh_get_num_ppfid(struct qed_dev *cdev);
+
+enum qed_eng {
+	QED_ENG0,
+	QED_ENG1,
+	QED_BOTH_ENG,
+};
+
+/**
+ * qed_llh_set_ppfid_affinity(): Set the engine affinity for the given
+ *	                         LLH filter bank.
+ *
+ * @cdev: Qed dev pointer.
+ * @ppfid: Relative within the allocated ppfids ('0' is the default one).
+ * @eng: Engine.
+ *
+ * Return: Int.
+ */
+int qed_llh_set_ppfid_affinity(struct qed_dev *cdev,
+			       u8 ppfid, enum qed_eng eng);
+
+/**
+ * qed_llh_set_roce_affinity(): Set the RoCE engine affinity.
+ *
+ * @cdev: Qed dev pointer.
+ * @eng: Engine.
+ *
+ * Return: Int.
+ */
+int qed_llh_set_roce_affinity(struct qed_dev *cdev, enum qed_eng eng);
+
+/**
+ * qed_llh_add_mac_filter(): Add a LLH MAC filter into the given filter
+ *	                     bank.
+ *
+ * @cdev: Qed dev pointer.
+ * @ppfid: Relative within the allocated ppfids ('0' is the default one).
+ * @mac_addr: MAC to add.
+ *
+ * Return: Int.
+ */
+int qed_llh_add_mac_filter(struct qed_dev *cdev,
+			   u8 ppfid, const u8 mac_addr[ETH_ALEN]);
+
+/**
+ * qed_llh_remove_mac_filter(): Remove a LLH MAC filter from the given
+ *	                        filter bank.
+ *
+ * @cdev: Qed dev pointer.
+ * @ppfid: Ppfid.
+ * @mac_addr: MAC to remove
+ *
+ * Return: Void.
+ */
+void qed_llh_remove_mac_filter(struct qed_dev *cdev,
+			       u8 ppfid, u8 mac_addr[ETH_ALEN]);
+
+enum qed_llh_prot_filter_type_t {
+	QED_LLH_FILTER_ETHERTYPE,
+	QED_LLH_FILTER_TCP_SRC_PORT,
+	QED_LLH_FILTER_TCP_DEST_PORT,
+	QED_LLH_FILTER_TCP_SRC_AND_DEST_PORT,
+	QED_LLH_FILTER_UDP_SRC_PORT,
+	QED_LLH_FILTER_UDP_DEST_PORT,
+	QED_LLH_FILTER_UDP_SRC_AND_DEST_PORT
+};
+
+/**
+ * qed_llh_add_protocol_filter(): Add a LLH protocol filter into the
+ *	                          given filter bank.
+ *
+ * @cdev: Qed dev pointer.
+ * @ppfid: Relative within the allocated ppfids ('0' is the default one).
+ * @type: Type of filters and comparing.
+ * @source_port_or_eth_type: Source port or ethertype to add.
+ * @dest_port: Destination port to add.
+ *
+ * Return: Int.
+ */
+int
+qed_llh_add_protocol_filter(struct qed_dev *cdev,
+			    u8 ppfid,
+			    enum qed_llh_prot_filter_type_t type,
+			    u16 source_port_or_eth_type, u16 dest_port);
+
+/**
+ * qed_llh_remove_protocol_filter(): Remove a LLH protocol filter from
+ *	                             the given filter bank.
+ *
+ * @cdev: Qed dev pointer.
+ * @ppfid: Relative within the allocated ppfids ('0' is the default one).
+ * @type: Type of filters and comparing.
+ * @source_port_or_eth_type: Source port or ethertype to add.
+ * @dest_port: Destination port to add.
+ */
+void
+qed_llh_remove_protocol_filter(struct qed_dev *cdev,
+			       u8 ppfid,
+			       enum qed_llh_prot_filter_type_t type,
+			       u16 source_port_or_eth_type, u16 dest_port);
+
+/**
+ * qed_final_cleanup(): Cleanup of previous driver remains prior to load.
+ *
+ * @p_hwfn: HW device data.
+ * @p_ptt: P_ptt.
+ * @id: For PF, engine-relative. For VF, PF-relative.
+ * @is_vf: True iff cleanup is made for a VF.
+ *
+ * Return: Int.
+ */
+int qed_final_cleanup(struct qed_hwfn *p_hwfn,
+		      struct qed_ptt *p_ptt, u16 id, bool is_vf);
+
+/**
+ * qed_get_queue_coalesce(): Retrieve coalesce value for a given queue.
+ *
+ * @p_hwfn: HW device data.
+ * @coal: Store coalesce value read from the hardware.
+ * @handle: P_handle.
+ *
+ * Return: Int.
+ **/
+int qed_get_queue_coalesce(struct qed_hwfn *p_hwfn, u16 *coal, void *handle);
+
+/**
+ * qed_set_queue_coalesce(): Configure coalesce parameters for Rx and
+ *    Tx queue. The fact that we can configure coalescing to up to 511, but on
+ *    varying accuracy [the bigger the value the less accurate] up to a mistake
+ *    of 3usec for the highest values.
+ *    While the API allows setting coalescing per-qid, all queues sharing a SB
+ *    should be in same range [i.e., either 0-0x7f, 0x80-0xff or 0x100-0x1ff]
+ *    otherwise configuration would break.
+ *
+ * @rx_coal: Rx Coalesce value in micro seconds.
+ * @tx_coal: TX Coalesce value in micro seconds.
+ * @p_handle: P_handle.
+ *
+ * Return: Int.
+ **/
+int
+qed_set_queue_coalesce(u16 rx_coal, u16 tx_coal, void *p_handle);
+
+/**
+ * qed_pglueb_set_pfid_enable(): Enable or disable PCI BUS MASTER.
+ *
+ * @p_hwfn: HW device data.
+ * @p_ptt: P_ptt.
+ * @b_enable: True/False.
+ *
+ * Return: Int.
+ */
+int qed_pglueb_set_pfid_enable(struct qed_hwfn *p_hwfn,
+			       struct qed_ptt *p_ptt, bool b_enable);
+
+/**
+ * qed_db_recovery_add(): add doorbell information to the doorbell
+ *                    recovery mechanism.
+ *
+ * @cdev: Qed dev pointer.
+ * @db_addr: Doorbell address.
+ * @db_data: Address of where db_data is stored.
+ * @db_width: Doorbell is 32b pr 64b.
+ * @db_space: Doorbell recovery addresses are user or kernel space.
+ *
+ * Return: Int.
+ */
+int qed_db_recovery_add(struct qed_dev *cdev,
+			void __iomem *db_addr,
+			void *db_data,
+			enum qed_db_rec_width db_width,
+			enum qed_db_rec_space db_space);
+
+/**
+ * qed_db_recovery_del() - remove doorbell information from the doorbell
+ * recovery mechanism. db_data serves as key (db_addr is not unique).
+ *
+ * @cdev: Qed dev pointer.
+ * @db_addr: doorbell address.
+ * @db_data: address where db_data is stored. Serves as key for the
+ *                  entry to delete.
+ *
+ * Return: Int.
+ */
+int qed_db_recovery_del(struct qed_dev *cdev,
+			void __iomem *db_addr, void *db_data);
+
+const char *qed_hw_get_resc_name(enum qed_resources res_id);
+#endif