Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 459 insertions, 0 deletions

diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.h b/drivers/net/ethernet/qlogic/qed/qed_int.h
new file mode 100644
index 000000000..7e5127f61
--- /dev/null
+++ b/drivers/net/ethernet/qlogic/qed/qed_int.h
@@ -0,0 +1,459 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
+/* QLogic qed NIC Driver
+ * Copyright (c) 2015-2017  QLogic Corporation
+ * Copyright (c) 2019-2020 Marvell International Ltd.
+ */
+
+#ifndef _QED_INT_H
+#define _QED_INT_H
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include "qed.h"
+
+/* Fields of IGU PF CONFIGURATION REGISTER */
+#define IGU_PF_CONF_FUNC_EN       (0x1 << 0)    /* function enable        */
+#define IGU_PF_CONF_MSI_MSIX_EN   (0x1 << 1)    /* MSI/MSIX enable        */
+#define IGU_PF_CONF_INT_LINE_EN   (0x1 << 2)    /* INT enable             */
+#define IGU_PF_CONF_ATTN_BIT_EN   (0x1 << 3)    /* attention enable       */
+#define IGU_PF_CONF_SINGLE_ISR_EN (0x1 << 4)    /* single ISR mode enable */
+#define IGU_PF_CONF_SIMD_MODE     (0x1 << 5)    /* simd all ones mode     */
+/* Fields of IGU VF CONFIGURATION REGISTER */
+#define IGU_VF_CONF_FUNC_EN        (0x1 << 0)	/* function enable        */
+#define IGU_VF_CONF_MSI_MSIX_EN    (0x1 << 1)	/* MSI/MSIX enable        */
+#define IGU_VF_CONF_SINGLE_ISR_EN  (0x1 << 4)	/* single ISR mode enable */
+#define IGU_VF_CONF_PARENT_MASK    (0xF)	/* Parent PF              */
+#define IGU_VF_CONF_PARENT_SHIFT   5		/* Parent PF              */
+
+/* Igu control commands
+ */
+enum igu_ctrl_cmd {
+	IGU_CTRL_CMD_TYPE_RD,
+	IGU_CTRL_CMD_TYPE_WR,
+	MAX_IGU_CTRL_CMD
+};
+
+/* Control register for the IGU command register
+ */
+struct igu_ctrl_reg {
+	u32 ctrl_data;
+#define IGU_CTRL_REG_FID_MASK           0xFFFF  /* Opaque_FID	 */
+#define IGU_CTRL_REG_FID_SHIFT          0
+#define IGU_CTRL_REG_PXP_ADDR_MASK      0xFFF   /* Command address */
+#define IGU_CTRL_REG_PXP_ADDR_SHIFT     16
+#define IGU_CTRL_REG_RESERVED_MASK      0x1
+#define IGU_CTRL_REG_RESERVED_SHIFT     28
+#define IGU_CTRL_REG_TYPE_MASK          0x1 /* use enum igu_ctrl_cmd */
+#define IGU_CTRL_REG_TYPE_SHIFT         31
+};
+
+enum qed_coalescing_fsm {
+	QED_COAL_RX_STATE_MACHINE,
+	QED_COAL_TX_STATE_MACHINE
+};
+
+/**
+ * qed_int_igu_enable_int(): Enable device interrupts.
+ *
+ * @p_hwfn: HW device data.
+ * @p_ptt: P_ptt.
+ * @int_mode: Interrupt mode to use.
+ *
+ * Return: Void.
+ */
+void qed_int_igu_enable_int(struct qed_hwfn *p_hwfn,
+			    struct qed_ptt *p_ptt,
+			    enum qed_int_mode int_mode);
+
+/**
+ * qed_int_igu_disable_int():  Disable device interrupts.
+ *
+ * @p_hwfn: HW device data.
+ * @p_ptt: P_ptt.
+ *
+ * Return: Void.
+ */
+void qed_int_igu_disable_int(struct qed_hwfn *p_hwfn,
+			     struct qed_ptt *p_ptt);
+
+/**
+ * qed_int_igu_read_sisr_reg(): Reads the single isr multiple dpc
+ *                             register from igu.
+ *
+ * @p_hwfn: HW device data.
+ *
+ * Return: u64.
+ */
+u64 qed_int_igu_read_sisr_reg(struct qed_hwfn *p_hwfn);
+
+#define QED_SP_SB_ID 0xffff
+/**
+ * qed_int_sb_init(): Initializes the sb_info structure.
+ *
+ * @p_hwfn: HW device data.
+ * @p_ptt: P_ptt.
+ * @sb_info: points to an uninitialized (but allocated) sb_info structure
+ * @sb_virt_addr: SB Virtual address.
+ * @sb_phy_addr: SB Physial address.
+ * @sb_id: the sb_id to be used (zero based in driver)
+ *           should use QED_SP_SB_ID for SP Status block
+ *
+ * Return: int.
+ *
+ * Once the structure is initialized it can be passed to sb related functions.
+ */
+int qed_int_sb_init(struct qed_hwfn *p_hwfn,
+		    struct qed_ptt *p_ptt,
+		    struct qed_sb_info *sb_info,
+		    void *sb_virt_addr,
+		    dma_addr_t sb_phy_addr,
+		    u16 sb_id);
+/**
+ * qed_int_sb_setup(): Setup the sb.
+ *
+ * @p_hwfn: HW device data.
+ * @p_ptt: P_ptt.
+ * @sb_info: Initialized sb_info structure.
+ *
+ * Return: Void.
+ */
+void qed_int_sb_setup(struct qed_hwfn *p_hwfn,
+		      struct qed_ptt *p_ptt,
+		      struct qed_sb_info *sb_info);
+
+/**
+ * qed_int_sb_release(): Releases the sb_info structure.
+ *
+ * @p_hwfn: HW device data.
+ * @sb_info: Points to an allocated sb_info structure.
+ * @sb_id: The sb_id to be used (zero based in driver)
+ *         should never be equal to QED_SP_SB_ID
+ *         (SP Status block).
+ *
+ * Return: int.
+ *
+ * Once the structure is released, it's memory can be freed.
+ */
+int qed_int_sb_release(struct qed_hwfn *p_hwfn,
+		       struct qed_sb_info *sb_info,
+		       u16 sb_id);
+
+/**
+ * qed_int_sp_dpc(): To be called when an interrupt is received on the
+ *                   default status block.
+ *
+ * @t: Tasklet.
+ *
+ * Return: Void.
+ *
+ */
+void qed_int_sp_dpc(struct tasklet_struct *t);
+
+/**
+ * qed_int_get_num_sbs(): Get the number of status blocks configured
+ *                        for this funciton in the igu.
+ *
+ * @p_hwfn: HW device data.
+ * @p_sb_cnt_info: Pointer to SB count info.
+ *
+ * Return: Void.
+ */
+void qed_int_get_num_sbs(struct qed_hwfn	*p_hwfn,
+			 struct qed_sb_cnt_info *p_sb_cnt_info);
+
+/**
+ * qed_int_disable_post_isr_release(): Performs the cleanup post ISR
+ *        release. The API need to be called after releasing all slowpath IRQs
+ *        of the device.
+ *
+ * @cdev: Qed dev pointer.
+ *
+ * Return: Void.
+ */
+void qed_int_disable_post_isr_release(struct qed_dev *cdev);
+
+/**
+ * qed_int_attn_clr_enable: Sets whether the general behavior is
+ *        preventing attentions from being reasserted, or following the
+ *        attributes of the specific attention.
+ *
+ * @cdev: Qed dev pointer.
+ * @clr_enable: Clear enable
+ *
+ * Return: Void.
+ *
+ */
+void qed_int_attn_clr_enable(struct qed_dev *cdev, bool clr_enable);
+
+/**
+ * qed_int_get_sb_dbg: Read debug information regarding a given SB
+ *
+ * @p_hwfn: hw function pointer
+ * @p_ptt: ptt resource
+ * @p_sb: pointer to status block for which we want to get info
+ * @p_info: pointer to struct to fill with information regarding SB
+ *
+ * Return: 0 with status block info filled on success, otherwise return error
+ */
+int qed_int_get_sb_dbg(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+		       struct qed_sb_info *p_sb, struct qed_sb_info_dbg *p_info);
+
+/**
+ * qed_db_rec_handler(): Doorbell Recovery handler.
+ *          Run doorbell recovery in case of PF overflow (and flush DORQ if
+ *          needed).
+ *
+ * @p_hwfn: HW device data.
+ * @p_ptt: P_ptt.
+ *
+ * Return: Int.
+ */
+int qed_db_rec_handler(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt);
+
+#define QED_CAU_DEF_RX_TIMER_RES 0
+#define QED_CAU_DEF_TX_TIMER_RES 0
+
+#define QED_SB_ATT_IDX  0x0001
+#define QED_SB_EVENT_MASK       0x0003
+
+#define SB_ALIGNED_SIZE(p_hwfn)	\
+	ALIGNED_TYPE_SIZE(struct status_block, p_hwfn)
+
+#define QED_SB_INVALID_IDX      0xffff
+
+struct qed_igu_block {
+	u8 status;
+#define QED_IGU_STATUS_FREE     0x01
+#define QED_IGU_STATUS_VALID    0x02
+#define QED_IGU_STATUS_PF       0x04
+#define QED_IGU_STATUS_DSB      0x08
+
+	u8 vector_number;
+	u8 function_id;
+	u8 is_pf;
+
+	/* Index inside IGU [meant for back reference] */
+	u16 igu_sb_id;
+
+	struct qed_sb_info *sb_info;
+};
+
+struct qed_igu_info {
+	struct qed_igu_block entry[MAX_TOT_SB_PER_PATH];
+	u16 igu_dsb_id;
+
+	struct qed_sb_cnt_info usage;
+
+	bool b_allow_pf_vf_change;
+};
+
+/**
+ * qed_int_igu_reset_cam(): Make sure the IGU CAM reflects the resources
+ *                          provided by MFW.
+ *
+ * @p_hwfn: HW device data.
+ * @p_ptt: P_ptt.
+ *
+ * Return: Void.
+ */
+int qed_int_igu_reset_cam(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt);
+
+/**
+ * qed_get_igu_sb_id(): Translate the weakly-defined client sb-id into
+ *                      an IGU sb-id
+ *
+ * @p_hwfn: HW device data.
+ * @sb_id: user provided sb_id.
+ *
+ * Return: An index inside IGU CAM where the SB resides.
+ */
+u16 qed_get_igu_sb_id(struct qed_hwfn *p_hwfn, u16 sb_id);
+
+/**
+ * qed_get_igu_free_sb(): Return a pointer to an unused valid SB
+ *
+ * @p_hwfn: HW device data.
+ * @b_is_pf: True iff we want a SB belonging to a PF.
+ *
+ * Return: Point to an igu_block, NULL if none is available.
+ */
+struct qed_igu_block *qed_get_igu_free_sb(struct qed_hwfn *p_hwfn,
+					  bool b_is_pf);
+
+void qed_int_igu_init_pure_rt(struct qed_hwfn *p_hwfn,
+			      struct qed_ptt *p_ptt,
+			      bool b_set,
+			      bool b_slowpath);
+
+void qed_int_igu_init_rt(struct qed_hwfn *p_hwfn);
+
+/**
+ * qed_int_igu_read_cam():  Reads the IGU CAM.
+ *	This function needs to be called during hardware
+ *	prepare. It reads the info from igu cam to know which
+ *	status block is the default / base status block etc.
+ *
+ * @p_hwfn: HW device data.
+ * @p_ptt: P_ptt.
+ *
+ * Return: Int.
+ */
+int qed_int_igu_read_cam(struct qed_hwfn *p_hwfn,
+			 struct qed_ptt *p_ptt);
+
+typedef int (*qed_int_comp_cb_t)(struct qed_hwfn *p_hwfn,
+				 void *cookie);
+/**
+ * qed_int_register_cb(): Register callback func for slowhwfn statusblock.
+ *
+ * @p_hwfn: HW device data.
+ * @comp_cb: Function to be called when there is an
+ *           interrupt on the sp sb
+ * @cookie: Passed to the callback function
+ * @sb_idx: (OUT) parameter which gives the chosen index
+ *           for this protocol.
+ * @p_fw_cons: Pointer to the actual address of the
+ *             consumer for this protocol.
+ *
+ * Return: Int.
+ *
+ * Every protocol that uses the slowhwfn status block
+ * should register a callback function that will be called
+ * once there is an update of the sp status block.
+ */
+int qed_int_register_cb(struct qed_hwfn *p_hwfn,
+			qed_int_comp_cb_t comp_cb,
+			void *cookie,
+			u8 *sb_idx,
+			__le16 **p_fw_cons);
+
+/**
+ * qed_int_unregister_cb(): Unregisters callback function from sp sb.
+ *
+ * @p_hwfn: HW device data.
+ * @pi: Producer Index.
+ *
+ * Return: Int.
+ *
+ * Partner of qed_int_register_cb -> should be called
+ * when no longer required.
+ */
+int qed_int_unregister_cb(struct qed_hwfn *p_hwfn,
+			  u8 pi);
+
+/**
+ * qed_int_get_sp_sb_id(): Get the slowhwfn sb id.
+ *
+ * @p_hwfn: HW device data.
+ *
+ * Return: u16.
+ */
+u16 qed_int_get_sp_sb_id(struct qed_hwfn *p_hwfn);
+
+/**
+ * qed_int_igu_init_pure_rt_single(): Status block cleanup.
+ *                                    Should be called for each status
+ *                                    block that will be used -> both PF / VF.
+ *
+ * @p_hwfn: HW device data.
+ * @p_ptt: P_ptt.
+ * @igu_sb_id: IGU status block id.
+ * @opaque: Opaque fid of the sb owner.
+ * @b_set: Set(1) / Clear(0).
+ *
+ * Return: Void.
+ */
+void qed_int_igu_init_pure_rt_single(struct qed_hwfn *p_hwfn,
+				     struct qed_ptt *p_ptt,
+				     u16 igu_sb_id,
+				     u16 opaque,
+				     bool b_set);
+
+/**
+ * qed_int_cau_conf_sb(): Configure cau for a given status block.
+ *
+ * @p_hwfn: HW device data.
+ * @p_ptt: P_ptt.
+ * @sb_phys: SB Physical.
+ * @igu_sb_id: IGU status block id.
+ * @vf_number: VF number
+ * @vf_valid: VF valid or not.
+ *
+ * Return: Void.
+ */
+void qed_int_cau_conf_sb(struct qed_hwfn *p_hwfn,
+			 struct qed_ptt *p_ptt,
+			 dma_addr_t sb_phys,
+			 u16 igu_sb_id,
+			 u16 vf_number,
+			 u8 vf_valid);
+
+/**
+ * qed_int_alloc(): QED interrupt alloc.
+ *
+ * @p_hwfn: HW device data.
+ * @p_ptt: P_ptt.
+ *
+ * Return: Int.
+ */
+int qed_int_alloc(struct qed_hwfn *p_hwfn,
+		  struct qed_ptt *p_ptt);
+
+/**
+ * qed_int_free(): QED interrupt free.
+ *
+ * @p_hwfn: HW device data.
+ *
+ * Return: Void.
+ */
+void qed_int_free(struct qed_hwfn *p_hwfn);
+
+/**
+ * qed_int_setup(): QED interrupt setup.
+ *
+ * @p_hwfn: HW device data.
+ * @p_ptt: P_ptt.
+ *
+ * Return: Void.
+ */
+void qed_int_setup(struct qed_hwfn *p_hwfn,
+		   struct qed_ptt *p_ptt);
+
+/**
+ * qed_int_igu_enable(): Enable Interrupt & Attention for hw function.
+ *
+ * @p_hwfn: HW device data.
+ * @p_ptt: P_ptt.
+ * @int_mode: Interrut mode
+ *
+ * Return: Int.
+ */
+int qed_int_igu_enable(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+		       enum qed_int_mode int_mode);
+
+/**
+ * qed_init_cau_sb_entry(): Initialize CAU status block entry.
+ *
+ * @p_hwfn: HW device data.
+ * @p_sb_entry: Pointer SB entry.
+ * @pf_id: PF number
+ * @vf_number: VF number
+ * @vf_valid: VF valid or not.
+ *
+ * Return: Void.
+ */
+void qed_init_cau_sb_entry(struct qed_hwfn *p_hwfn,
+			   struct cau_sb_entry *p_sb_entry,
+			   u8 pf_id,
+			   u16 vf_number,
+			   u8 vf_valid);
+
+int qed_int_set_timer_res(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+			  u8 timer_res, u16 sb_id, bool tx);
+
+#define QED_MAPPING_MEMORY_SIZE(dev)	(NUM_OF_SBS(dev))
+
+int qed_pglueb_rbc_attn_handler(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+				bool hw_init);
+
+#endif