Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 430 insertions, 0 deletions

diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.h b/drivers/net/ethernet/qlogic/qed/qed_l2.h
new file mode 100644
index 000000000..a538cf478
--- /dev/null
+++ b/drivers/net/ethernet/qlogic/qed/qed_l2.h
@@ -0,0 +1,430 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
+/* QLogic qed NIC Driver
+ * Copyright (c) 2015-2017  QLogic Corporation
+ * Copyright (c) 2019-2020 Marvell International Ltd.
+ */
+
+#ifndef _QED_L2_H
+#define _QED_L2_H
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/qed/qed_eth_if.h>
+#include "qed.h"
+#include "qed_hw.h"
+#include "qed_sp.h"
+struct qed_rss_params {
+	u8 update_rss_config;
+	u8 rss_enable;
+	u8 rss_eng_id;
+	u8 update_rss_capabilities;
+	u8 update_rss_ind_table;
+	u8 update_rss_key;
+	u8 rss_caps;
+	u8 rss_table_size_log;
+
+	/* Indirection table consist of rx queue handles */
+	void *rss_ind_table[QED_RSS_IND_TABLE_SIZE];
+	u32 rss_key[QED_RSS_KEY_SIZE];
+};
+
+struct qed_sge_tpa_params {
+	u8 max_buffers_per_cqe;
+
+	u8 update_tpa_en_flg;
+	u8 tpa_ipv4_en_flg;
+	u8 tpa_ipv6_en_flg;
+	u8 tpa_ipv4_tunn_en_flg;
+	u8 tpa_ipv6_tunn_en_flg;
+
+	u8 update_tpa_param_flg;
+	u8 tpa_pkt_split_flg;
+	u8 tpa_hdr_data_split_flg;
+	u8 tpa_gro_consistent_flg;
+	u8 tpa_max_aggs_num;
+	u16 tpa_max_size;
+	u16 tpa_min_size_to_start;
+	u16 tpa_min_size_to_cont;
+};
+
+enum qed_filter_opcode {
+	QED_FILTER_ADD,
+	QED_FILTER_REMOVE,
+	QED_FILTER_MOVE,
+	QED_FILTER_REPLACE,	/* Delete all MACs and add new one instead */
+	QED_FILTER_FLUSH,	/* Removes all filters */
+};
+
+enum qed_filter_ucast_type {
+	QED_FILTER_MAC,
+	QED_FILTER_VLAN,
+	QED_FILTER_MAC_VLAN,
+	QED_FILTER_INNER_MAC,
+	QED_FILTER_INNER_VLAN,
+	QED_FILTER_INNER_PAIR,
+	QED_FILTER_INNER_MAC_VNI_PAIR,
+	QED_FILTER_MAC_VNI_PAIR,
+	QED_FILTER_VNI,
+};
+
+struct qed_filter_ucast {
+	enum qed_filter_opcode opcode;
+	enum qed_filter_ucast_type type;
+	u8 is_rx_filter;
+	u8 is_tx_filter;
+	u8 vport_to_add_to;
+	u8 vport_to_remove_from;
+	unsigned char mac[ETH_ALEN];
+	u8 assert_on_error;
+	u16 vlan;
+	u32 vni;
+};
+
+struct qed_filter_mcast {
+	/* MOVE is not supported for multicast */
+	enum qed_filter_opcode opcode;
+	u8 vport_to_add_to;
+	u8 vport_to_remove_from;
+	u8 num_mc_addrs;
+#define QED_MAX_MC_ADDRS        64
+	unsigned char mac[QED_MAX_MC_ADDRS][ETH_ALEN];
+};
+
+/**
+ * qed_eth_rx_queue_stop(): This ramrod closes an Rx queue.
+ *
+ * @p_hwfn: HW device data.
+ * @p_rxq: Handler of queue to close
+ * @eq_completion_only: If True completion will be on
+ *                      EQe, if False completion will be
+ *                      on EQe if p_hwfn opaque
+ *                      different from the RXQ opaque
+ *                      otherwise on CQe.
+ * @cqe_completion: If True completion will be receive on CQe.
+ *
+ * Return: Int.
+ */
+int
+qed_eth_rx_queue_stop(struct qed_hwfn *p_hwfn,
+		      void *p_rxq,
+		      bool eq_completion_only, bool cqe_completion);
+
+/**
+ * qed_eth_tx_queue_stop(): Closes a Tx queue.
+ *
+ * @p_hwfn: HW device data.
+ * @p_txq: handle to Tx queue needed to be closed.
+ *
+ * Return: Int.
+ */
+int qed_eth_tx_queue_stop(struct qed_hwfn *p_hwfn, void *p_txq);
+
+enum qed_tpa_mode {
+	QED_TPA_MODE_NONE,
+	QED_TPA_MODE_UNUSED,
+	QED_TPA_MODE_GRO,
+	QED_TPA_MODE_MAX
+};
+
+struct qed_sp_vport_start_params {
+	enum qed_tpa_mode tpa_mode;
+	bool remove_inner_vlan;
+	bool tx_switching;
+	bool handle_ptp_pkts;
+	bool only_untagged;
+	bool drop_ttl0;
+	u8 max_buffers_per_cqe;
+	u32 concrete_fid;
+	u16 opaque_fid;
+	u8 vport_id;
+	u16 mtu;
+	bool check_mac;
+	bool check_ethtype;
+};
+
+int qed_sp_eth_vport_start(struct qed_hwfn *p_hwfn,
+			   struct qed_sp_vport_start_params *p_params);
+
+struct qed_filter_accept_flags {
+	u8	update_rx_mode_config;
+	u8	update_tx_mode_config;
+	u8	rx_accept_filter;
+	u8	tx_accept_filter;
+#define QED_ACCEPT_NONE         0x01
+#define QED_ACCEPT_UCAST_MATCHED        0x02
+#define QED_ACCEPT_UCAST_UNMATCHED      0x04
+#define QED_ACCEPT_MCAST_MATCHED        0x08
+#define QED_ACCEPT_MCAST_UNMATCHED      0x10
+#define QED_ACCEPT_BCAST                0x20
+#define QED_ACCEPT_ANY_VNI              0x40
+};
+
+struct qed_arfs_config_params {
+	bool tcp;
+	bool udp;
+	bool ipv4;
+	bool ipv6;
+	enum qed_filter_config_mode mode;
+};
+
+struct qed_sp_vport_update_params {
+	u16				opaque_fid;
+	u8				vport_id;
+	u8				update_vport_active_rx_flg;
+	u8				vport_active_rx_flg;
+	u8				update_vport_active_tx_flg;
+	u8				vport_active_tx_flg;
+	u8				update_inner_vlan_removal_flg;
+	u8				inner_vlan_removal_flg;
+	u8				silent_vlan_removal_flg;
+	u8				update_default_vlan_enable_flg;
+	u8				default_vlan_enable_flg;
+	u8				update_default_vlan_flg;
+	u16				default_vlan;
+	u8				update_tx_switching_flg;
+	u8				tx_switching_flg;
+	u8				update_approx_mcast_flg;
+	u8				update_anti_spoofing_en_flg;
+	u8				anti_spoofing_en;
+	u8				update_accept_any_vlan_flg;
+	u8				accept_any_vlan;
+	u32				bins[8];
+	struct qed_rss_params		*rss_params;
+	struct qed_filter_accept_flags	accept_flags;
+	struct qed_sge_tpa_params	*sge_tpa_params;
+	u8				update_ctl_frame_check;
+	u8				mac_chk_en;
+	u8				ethtype_chk_en;
+};
+
+int qed_sp_vport_update(struct qed_hwfn *p_hwfn,
+			struct qed_sp_vport_update_params *p_params,
+			enum spq_mode comp_mode,
+			struct qed_spq_comp_cb *p_comp_data);
+
+/**
+ * qed_sp_vport_stop: This ramrod closes a VPort after all its
+ *                    RX and TX queues are terminated.
+ *                    An Assert is generated if any queues are left open.
+ *
+ * @p_hwfn: HW device data.
+ * @opaque_fid: Opaque FID
+ * @vport_id: VPort ID.
+ *
+ * Return: Int.
+ */
+int qed_sp_vport_stop(struct qed_hwfn *p_hwfn, u16 opaque_fid, u8 vport_id);
+
+int qed_sp_eth_filter_ucast(struct qed_hwfn *p_hwfn,
+			    u16 opaque_fid,
+			    struct qed_filter_ucast *p_filter_cmd,
+			    enum spq_mode comp_mode,
+			    struct qed_spq_comp_cb *p_comp_data);
+
+/**
+ * qed_sp_eth_rx_queues_update(): This ramrod updates an RX queue.
+ *                                It is used for setting the active state
+ *                                of the queue and updating the TPA and
+ *                                SGE parameters.
+ * @p_hwfn: HW device data.
+ * @pp_rxq_handlers: An array of queue handlers to be updated.
+ * @num_rxqs: number of queues to update.
+ * @complete_cqe_flg: Post completion to the CQE Ring if set.
+ * @complete_event_flg: Post completion to the Event Ring if set.
+ * @comp_mode: Comp mode.
+ * @p_comp_data: Pointer Comp data.
+ *
+ * Return: Int.
+ *
+ * Note At the moment - only used by non-linux VFs.
+ */
+
+int
+qed_sp_eth_rx_queues_update(struct qed_hwfn *p_hwfn,
+			    void **pp_rxq_handlers,
+			    u8 num_rxqs,
+			    u8 complete_cqe_flg,
+			    u8 complete_event_flg,
+			    enum spq_mode comp_mode,
+			    struct qed_spq_comp_cb *p_comp_data);
+
+void qed_get_vport_stats(struct qed_dev *cdev, struct qed_eth_stats *stats);
+
+void qed_reset_vport_stats(struct qed_dev *cdev);
+
+/**
+ * qed_arfs_mode_configure(): Enable or disable rfs mode.
+ *                            It must accept at least one of tcp or udp true
+ *                            and at least one of ipv4 or ipv6 true to enable
+ *                            rfs mode.
+ *
+ * @p_hwfn: HW device data.
+ * @p_ptt: P_ptt.
+ * @p_cfg_params: arfs mode configuration parameters.
+ *
+ * Return. Void.
+ */
+void qed_arfs_mode_configure(struct qed_hwfn *p_hwfn,
+			     struct qed_ptt *p_ptt,
+			     struct qed_arfs_config_params *p_cfg_params);
+
+/**
+ * qed_configure_rfs_ntuple_filter(): This ramrod should be used to add
+ *                                     or remove arfs hw filter
+ *
+ * @p_hwfn: HW device data.
+ * @p_cb: Used for QED_SPQ_MODE_CB,where client would initialize
+ *        it with cookie and callback function address, if not
+ *        using this mode then client must pass NULL.
+ * @p_params: Pointer to params.
+ *
+ * Return: Void.
+ */
+int
+qed_configure_rfs_ntuple_filter(struct qed_hwfn *p_hwfn,
+				struct qed_spq_comp_cb *p_cb,
+				struct qed_ntuple_filter_params *p_params);
+
+#define MAX_QUEUES_PER_QZONE    (sizeof(unsigned long) * 8)
+#define QED_QUEUE_CID_SELF	(0xff)
+
+/* Almost identical to the qed_queue_start_common_params,
+ * but here we maintain the SB index in IGU CAM.
+ */
+struct qed_queue_cid_params {
+	u8 vport_id;
+	u16 queue_id;
+	u8 stats_id;
+};
+
+/* Additional parameters required for initialization of the queue_cid
+ * and are relevant only for a PF initializing one for its VFs.
+ */
+struct qed_queue_cid_vf_params {
+	/* Should match the VF's relative index */
+	u8 vfid;
+
+	/* 0-based queue index. Should reflect the relative qzone the
+	 * VF thinks is associated with it [in its range].
+	 */
+	u8 vf_qid;
+
+	/* Indicates a VF is legacy, making it differ in several things:
+	 *  - Producers would be placed in a different place.
+	 *  - Makes assumptions regarding the CIDs.
+	 */
+	u8 vf_legacy;
+
+	u8 qid_usage_idx;
+};
+
+struct qed_queue_cid {
+	/* For stats-id, the `rel' is actually absolute as well */
+	struct qed_queue_cid_params rel;
+	struct qed_queue_cid_params abs;
+
+	/* These have no 'relative' meaning */
+	u16 sb_igu_id;
+	u8 sb_idx;
+
+	u32 cid;
+	u16 opaque_fid;
+
+	bool b_is_rx;
+
+	/* VFs queues are mapped differently, so we need to know the
+	 * relative queue associated with them [0-based].
+	 * Notice this is relevant on the *PF* queue-cid of its VF's queues,
+	 * and not on the VF itself.
+	 */
+	u8 vfid;
+	u8 vf_qid;
+
+	/* We need an additional index to differentiate between queues opened
+	 * for same queue-zone, as VFs would have to communicate the info
+	 * to the PF [otherwise PF has no way to differentiate].
+	 */
+	u8 qid_usage_idx;
+
+	u8 vf_legacy;
+#define QED_QCID_LEGACY_VF_RX_PROD	(BIT(0))
+#define QED_QCID_LEGACY_VF_CID		(BIT(1))
+
+	struct qed_hwfn *p_owner;
+};
+
+int qed_l2_alloc(struct qed_hwfn *p_hwfn);
+void qed_l2_setup(struct qed_hwfn *p_hwfn);
+void qed_l2_free(struct qed_hwfn *p_hwfn);
+
+void qed_eth_queue_cid_release(struct qed_hwfn *p_hwfn,
+			       struct qed_queue_cid *p_cid);
+
+struct qed_queue_cid *
+qed_eth_queue_to_cid(struct qed_hwfn *p_hwfn,
+		     u16 opaque_fid,
+		     struct qed_queue_start_common_params *p_params,
+		     bool b_is_rx,
+		     struct qed_queue_cid_vf_params *p_vf_params);
+
+int
+qed_sp_eth_vport_start(struct qed_hwfn *p_hwfn,
+		       struct qed_sp_vport_start_params *p_params);
+
+/**
+ * qed_eth_rxq_start_ramrod(): Starts an Rx queue, when queue_cid is
+ *                             already prepared
+ *
+ * @p_hwfn: HW device data.
+ * @p_cid: Pointer CID.
+ * @bd_max_bytes: Max bytes.
+ * @bd_chain_phys_addr: Chain physcial address.
+ * @cqe_pbl_addr: PBL address.
+ * @cqe_pbl_size: PBL size.
+ *
+ * Return: Int.
+ */
+int
+qed_eth_rxq_start_ramrod(struct qed_hwfn *p_hwfn,
+			 struct qed_queue_cid *p_cid,
+			 u16 bd_max_bytes,
+			 dma_addr_t bd_chain_phys_addr,
+			 dma_addr_t cqe_pbl_addr, u16 cqe_pbl_size);
+
+/**
+ * qed_eth_txq_start_ramrod(): Starts a Tx queue, where queue_cid is
+ *                             already prepared
+ *
+ * @p_hwfn: HW device data.
+ * @p_cid: Pointer CID.
+ * @pbl_addr: PBL address.
+ * @pbl_size: PBL size.
+ * @pq_id: Parameters for choosing the PQ for this Tx queue.
+ *
+ * Return: Int.
+ */
+int
+qed_eth_txq_start_ramrod(struct qed_hwfn *p_hwfn,
+			 struct qed_queue_cid *p_cid,
+			 dma_addr_t pbl_addr, u16 pbl_size, u16 pq_id);
+
+u8 qed_mcast_bin_from_mac(u8 *mac);
+
+int qed_set_rxq_coalesce(struct qed_hwfn *p_hwfn,
+			 struct qed_ptt *p_ptt,
+			 u16 coalesce, struct qed_queue_cid *p_cid);
+
+int qed_set_txq_coalesce(struct qed_hwfn *p_hwfn,
+			 struct qed_ptt *p_ptt,
+			 u16 coalesce, struct qed_queue_cid *p_cid);
+
+int qed_get_rxq_coalesce(struct qed_hwfn *p_hwfn,
+			 struct qed_ptt *p_ptt,
+			 struct qed_queue_cid *p_cid, u16 *p_hw_coal);
+
+int qed_get_txq_coalesce(struct qed_hwfn *p_hwfn,
+			 struct qed_ptt *p_ptt,
+			 struct qed_queue_cid *p_cid, u16 *p_hw_coal);
+
+#endif