Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 237 insertions, 0 deletions

diff --git a/drivers/net/ethernet/qualcomm/emac/emac-sgmii-fsm9900.c b/drivers/net/ethernet/qualcomm/emac/emac-sgmii-fsm9900.c
new file mode 100644
index 000000000..bd9ad3297
--- /dev/null
+++ b/drivers/net/ethernet/qualcomm/emac/emac-sgmii-fsm9900.c
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
+ */
+
+/* Qualcomm Technologies, Inc. FSM9900 EMAC SGMII Controller driver.
+ */
+
+#include <linux/iopoll.h>
+#include "emac.h"
+
+/* EMAC_QSERDES register offsets */
+#define EMAC_QSERDES_COM_SYS_CLK_CTRL		0x0000
+#define EMAC_QSERDES_COM_PLL_CNTRL		0x0014
+#define EMAC_QSERDES_COM_PLL_IP_SETI		0x0018
+#define EMAC_QSERDES_COM_PLL_CP_SETI		0x0024
+#define EMAC_QSERDES_COM_PLL_IP_SETP		0x0028
+#define EMAC_QSERDES_COM_PLL_CP_SETP		0x002c
+#define EMAC_QSERDES_COM_SYSCLK_EN_SEL		0x0038
+#define EMAC_QSERDES_COM_RESETSM_CNTRL		0x0040
+#define EMAC_QSERDES_COM_PLLLOCK_CMP1		0x0044
+#define EMAC_QSERDES_COM_PLLLOCK_CMP2		0x0048
+#define EMAC_QSERDES_COM_PLLLOCK_CMP3		0x004c
+#define EMAC_QSERDES_COM_PLLLOCK_CMP_EN		0x0050
+#define EMAC_QSERDES_COM_DEC_START1		0x0064
+#define EMAC_QSERDES_COM_DIV_FRAC_START1	0x0098
+#define EMAC_QSERDES_COM_DIV_FRAC_START2	0x009c
+#define EMAC_QSERDES_COM_DIV_FRAC_START3	0x00a0
+#define EMAC_QSERDES_COM_DEC_START2		0x00a4
+#define EMAC_QSERDES_COM_PLL_CRCTRL		0x00ac
+#define EMAC_QSERDES_COM_RESET_SM		0x00bc
+#define EMAC_QSERDES_TX_BIST_MODE_LANENO	0x0100
+#define EMAC_QSERDES_TX_TX_EMP_POST1_LVL	0x0108
+#define EMAC_QSERDES_TX_TX_DRV_LVL		0x010c
+#define EMAC_QSERDES_TX_LANE_MODE		0x0150
+#define EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN	0x0170
+#define EMAC_QSERDES_RX_CDR_CONTROL		0x0200
+#define EMAC_QSERDES_RX_CDR_CONTROL2		0x0210
+#define EMAC_QSERDES_RX_RX_EQ_GAIN12		0x0230
+
+/* EMAC_SGMII register offsets */
+#define EMAC_SGMII_PHY_SERDES_START		0x0000
+#define EMAC_SGMII_PHY_CMN_PWR_CTRL		0x0004
+#define EMAC_SGMII_PHY_RX_PWR_CTRL		0x0008
+#define EMAC_SGMII_PHY_TX_PWR_CTRL		0x000C
+#define EMAC_SGMII_PHY_LANE_CTRL1		0x0018
+#define EMAC_SGMII_PHY_CDR_CTRL0		0x0058
+#define EMAC_SGMII_PHY_POW_DWN_CTRL0		0x0080
+#define EMAC_SGMII_PHY_INTERRUPT_MASK		0x00b4
+
+#define PLL_IPSETI(x)				((x) & 0x3f)
+
+#define PLL_CPSETI(x)				((x) & 0xff)
+
+#define PLL_IPSETP(x)				((x) & 0x3f)
+
+#define PLL_CPSETP(x)				((x) & 0x1f)
+
+#define PLL_RCTRL(x)				(((x) & 0xf) << 4)
+#define PLL_CCTRL(x)				((x) & 0xf)
+
+#define LANE_MODE(x)				((x) & 0x1f)
+
+#define SYSCLK_CM				BIT(4)
+#define SYSCLK_AC_COUPLE			BIT(3)
+
+#define OCP_EN					BIT(5)
+#define PLL_DIV_FFEN				BIT(2)
+#define PLL_DIV_ORD				BIT(1)
+
+#define SYSCLK_SEL_CMOS				BIT(3)
+
+#define FRQ_TUNE_MODE				BIT(4)
+
+#define PLLLOCK_CMP_EN				BIT(0)
+
+#define DEC_START1_MUX				BIT(7)
+#define DEC_START1(x)				((x) & 0x7f)
+
+#define DIV_FRAC_START_MUX			BIT(7)
+#define DIV_FRAC_START(x)			((x) & 0x7f)
+
+#define DIV_FRAC_START3_MUX			BIT(4)
+#define DIV_FRAC_START3(x)			((x) & 0xf)
+
+#define DEC_START2_MUX				BIT(1)
+#define DEC_START2				BIT(0)
+
+#define READY					BIT(5)
+
+#define TX_EMP_POST1_LVL_MUX			BIT(5)
+#define TX_EMP_POST1_LVL(x)			((x) & 0x1f)
+
+#define TX_DRV_LVL_MUX				BIT(4)
+#define TX_DRV_LVL(x)				((x) & 0xf)
+
+#define EMP_EN_MUX				BIT(1)
+#define EMP_EN					BIT(0)
+
+#define SECONDORDERENABLE			BIT(6)
+#define FIRSTORDER_THRESH(x)			(((x) & 0x7) << 3)
+#define SECONDORDERGAIN(x)			((x) & 0x7)
+
+#define RX_EQ_GAIN2(x)				(((x) & 0xf) << 4)
+#define RX_EQ_GAIN1(x)				((x) & 0xf)
+
+#define SERDES_START				BIT(0)
+
+#define BIAS_EN					BIT(6)
+#define PLL_EN					BIT(5)
+#define SYSCLK_EN				BIT(4)
+#define CLKBUF_L_EN				BIT(3)
+#define PLL_TXCLK_EN				BIT(1)
+#define PLL_RXCLK_EN				BIT(0)
+
+#define L0_RX_SIGDET_EN				BIT(7)
+#define L0_RX_TERM_MODE(x)			(((x) & 3) << 4)
+#define L0_RX_I_EN				BIT(1)
+
+#define L0_TX_EN				BIT(5)
+#define L0_CLKBUF_EN				BIT(4)
+#define L0_TRAN_BIAS_EN				BIT(1)
+
+#define L0_RX_EQUALIZE_ENABLE			BIT(6)
+#define L0_RESET_TSYNC_EN			BIT(4)
+#define L0_DRV_LVL(x)				((x) & 0xf)
+
+#define PWRDN_B					BIT(0)
+#define CDR_MAX_CNT(x)				((x) & 0xff)
+
+#define PLLLOCK_CMP(x)				((x) & 0xff)
+
+#define SERDES_START_WAIT_TIMES			100
+
+struct emac_reg_write {
+	unsigned int offset;
+	u32 val;
+};
+
+static void emac_reg_write_all(void __iomem *base,
+			       const struct emac_reg_write *itr, size_t size)
+{
+	size_t i;
+
+	for (i = 0; i < size; ++itr, ++i)
+		writel(itr->val, base + itr->offset);
+}
+
+static const struct emac_reg_write physical_coding_sublayer_programming[] = {
+	{EMAC_SGMII_PHY_CDR_CTRL0, CDR_MAX_CNT(15)},
+	{EMAC_SGMII_PHY_POW_DWN_CTRL0, PWRDN_B},
+	{EMAC_SGMII_PHY_CMN_PWR_CTRL,
+		BIAS_EN | SYSCLK_EN | CLKBUF_L_EN | PLL_TXCLK_EN | PLL_RXCLK_EN},
+	{EMAC_SGMII_PHY_TX_PWR_CTRL, L0_TX_EN | L0_CLKBUF_EN | L0_TRAN_BIAS_EN},
+	{EMAC_SGMII_PHY_RX_PWR_CTRL,
+		L0_RX_SIGDET_EN | L0_RX_TERM_MODE(1) | L0_RX_I_EN},
+	{EMAC_SGMII_PHY_CMN_PWR_CTRL,
+		BIAS_EN | PLL_EN | SYSCLK_EN | CLKBUF_L_EN | PLL_TXCLK_EN |
+		PLL_RXCLK_EN},
+	{EMAC_SGMII_PHY_LANE_CTRL1,
+		L0_RX_EQUALIZE_ENABLE | L0_RESET_TSYNC_EN | L0_DRV_LVL(15)},
+};
+
+static const struct emac_reg_write sysclk_refclk_setting[] = {
+	{EMAC_QSERDES_COM_SYSCLK_EN_SEL, SYSCLK_SEL_CMOS},
+	{EMAC_QSERDES_COM_SYS_CLK_CTRL,	SYSCLK_CM | SYSCLK_AC_COUPLE},
+};
+
+static const struct emac_reg_write pll_setting[] = {
+	{EMAC_QSERDES_COM_PLL_IP_SETI, PLL_IPSETI(1)},
+	{EMAC_QSERDES_COM_PLL_CP_SETI, PLL_CPSETI(59)},
+	{EMAC_QSERDES_COM_PLL_IP_SETP, PLL_IPSETP(10)},
+	{EMAC_QSERDES_COM_PLL_CP_SETP, PLL_CPSETP(9)},
+	{EMAC_QSERDES_COM_PLL_CRCTRL, PLL_RCTRL(15) | PLL_CCTRL(11)},
+	{EMAC_QSERDES_COM_PLL_CNTRL, OCP_EN | PLL_DIV_FFEN | PLL_DIV_ORD},
+	{EMAC_QSERDES_COM_DEC_START1, DEC_START1_MUX | DEC_START1(2)},
+	{EMAC_QSERDES_COM_DEC_START2, DEC_START2_MUX | DEC_START2},
+	{EMAC_QSERDES_COM_DIV_FRAC_START1,
+		DIV_FRAC_START_MUX | DIV_FRAC_START(85)},
+	{EMAC_QSERDES_COM_DIV_FRAC_START2,
+		DIV_FRAC_START_MUX | DIV_FRAC_START(42)},
+	{EMAC_QSERDES_COM_DIV_FRAC_START3,
+		DIV_FRAC_START3_MUX | DIV_FRAC_START3(3)},
+	{EMAC_QSERDES_COM_PLLLOCK_CMP1, PLLLOCK_CMP(43)},
+	{EMAC_QSERDES_COM_PLLLOCK_CMP2, PLLLOCK_CMP(104)},
+	{EMAC_QSERDES_COM_PLLLOCK_CMP3, PLLLOCK_CMP(0)},
+	{EMAC_QSERDES_COM_PLLLOCK_CMP_EN, PLLLOCK_CMP_EN},
+	{EMAC_QSERDES_COM_RESETSM_CNTRL, FRQ_TUNE_MODE},
+};
+
+static const struct emac_reg_write cdr_setting[] = {
+	{EMAC_QSERDES_RX_CDR_CONTROL,
+		SECONDORDERENABLE | FIRSTORDER_THRESH(3) | SECONDORDERGAIN(2)},
+	{EMAC_QSERDES_RX_CDR_CONTROL2,
+		SECONDORDERENABLE | FIRSTORDER_THRESH(3) | SECONDORDERGAIN(4)},
+};
+
+static const struct emac_reg_write tx_rx_setting[] = {
+	{EMAC_QSERDES_TX_BIST_MODE_LANENO, 0},
+	{EMAC_QSERDES_TX_TX_DRV_LVL, TX_DRV_LVL_MUX | TX_DRV_LVL(15)},
+	{EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN, EMP_EN_MUX | EMP_EN},
+	{EMAC_QSERDES_TX_TX_EMP_POST1_LVL,
+		TX_EMP_POST1_LVL_MUX | TX_EMP_POST1_LVL(1)},
+	{EMAC_QSERDES_RX_RX_EQ_GAIN12, RX_EQ_GAIN2(15) | RX_EQ_GAIN1(15)},
+	{EMAC_QSERDES_TX_LANE_MODE, LANE_MODE(8)},
+};
+
+int emac_sgmii_init_fsm9900(struct emac_adapter *adpt)
+{
+	struct emac_sgmii *phy = &adpt->phy;
+	unsigned int i;
+
+	emac_reg_write_all(phy->base, physical_coding_sublayer_programming,
+			   ARRAY_SIZE(physical_coding_sublayer_programming));
+	emac_reg_write_all(phy->base, sysclk_refclk_setting,
+			   ARRAY_SIZE(sysclk_refclk_setting));
+	emac_reg_write_all(phy->base, pll_setting, ARRAY_SIZE(pll_setting));
+	emac_reg_write_all(phy->base, cdr_setting, ARRAY_SIZE(cdr_setting));
+	emac_reg_write_all(phy->base, tx_rx_setting, ARRAY_SIZE(tx_rx_setting));
+
+	/* Power up the Ser/Des engine */
+	writel(SERDES_START, phy->base + EMAC_SGMII_PHY_SERDES_START);
+
+	for (i = 0; i < SERDES_START_WAIT_TIMES; i++) {
+		if (readl(phy->base + EMAC_QSERDES_COM_RESET_SM) & READY)
+			break;
+		usleep_range(100, 200);
+	}
+
+	if (i == SERDES_START_WAIT_TIMES) {
+		netdev_err(adpt->netdev, "error: ser/des failed to start\n");
+		return -EIO;
+	}
+	/* Mask out all the SGMII Interrupt */
+	writel(0, phy->base + EMAC_SGMII_PHY_INTERRUPT_MASK);
+
+	return 0;
+}