Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 504 insertions, 0 deletions

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
new file mode 100644
index 000000000..18acf7dd7
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
@@ -0,0 +1,504 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Synopsys DWC Ethernet Quality-of-Service v4.10a linux driver
+ *
+ * Copyright (C) 2016 Joao Pinto <jpinto@synopsys.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/ethtool.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_net.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/stmmac.h>
+
+#include "stmmac_platform.h"
+#include "dwmac4.h"
+
+struct tegra_eqos {
+	struct device *dev;
+	void __iomem *regs;
+
+	struct reset_control *rst;
+	struct clk *clk_master;
+	struct clk *clk_slave;
+	struct clk *clk_tx;
+	struct clk *clk_rx;
+
+	struct gpio_desc *reset;
+};
+
+static int dwc_eth_dwmac_config_dt(struct platform_device *pdev,
+				   struct plat_stmmacenet_data *plat_dat)
+{
+	struct device *dev = &pdev->dev;
+	u32 burst_map = 0;
+	u32 bit_index = 0;
+	u32 a_index = 0;
+
+	if (!plat_dat->axi) {
+		plat_dat->axi = kzalloc(sizeof(struct stmmac_axi), GFP_KERNEL);
+
+		if (!plat_dat->axi)
+			return -ENOMEM;
+	}
+
+	plat_dat->axi->axi_lpi_en = device_property_read_bool(dev,
+							      "snps,en-lpi");
+	if (device_property_read_u32(dev, "snps,write-requests",
+				     &plat_dat->axi->axi_wr_osr_lmt)) {
+		/**
+		 * Since the register has a reset value of 1, if property
+		 * is missing, default to 1.
+		 */
+		plat_dat->axi->axi_wr_osr_lmt = 1;
+	} else {
+		/**
+		 * If property exists, to keep the behavior from dwc_eth_qos,
+		 * subtract one after parsing.
+		 */
+		plat_dat->axi->axi_wr_osr_lmt--;
+	}
+
+	if (device_property_read_u32(dev, "snps,read-requests",
+				     &plat_dat->axi->axi_rd_osr_lmt)) {
+		/**
+		 * Since the register has a reset value of 1, if property
+		 * is missing, default to 1.
+		 */
+		plat_dat->axi->axi_rd_osr_lmt = 1;
+	} else {
+		/**
+		 * If property exists, to keep the behavior from dwc_eth_qos,
+		 * subtract one after parsing.
+		 */
+		plat_dat->axi->axi_rd_osr_lmt--;
+	}
+	device_property_read_u32(dev, "snps,burst-map", &burst_map);
+
+	/* converts burst-map bitmask to burst array */
+	for (bit_index = 0; bit_index < 7; bit_index++) {
+		if (burst_map & (1 << bit_index)) {
+			switch (bit_index) {
+			case 0:
+			plat_dat->axi->axi_blen[a_index] = 4; break;
+			case 1:
+			plat_dat->axi->axi_blen[a_index] = 8; break;
+			case 2:
+			plat_dat->axi->axi_blen[a_index] = 16; break;
+			case 3:
+			plat_dat->axi->axi_blen[a_index] = 32; break;
+			case 4:
+			plat_dat->axi->axi_blen[a_index] = 64; break;
+			case 5:
+			plat_dat->axi->axi_blen[a_index] = 128; break;
+			case 6:
+			plat_dat->axi->axi_blen[a_index] = 256; break;
+			default:
+			break;
+			}
+			a_index++;
+		}
+	}
+
+	/* dwc-qos needs GMAC4, AAL, TSO and PMT */
+	plat_dat->has_gmac4 = 1;
+	plat_dat->dma_cfg->aal = 1;
+	plat_dat->tso_en = 1;
+	plat_dat->pmt = 1;
+
+	return 0;
+}
+
+static int dwc_qos_probe(struct platform_device *pdev,
+			 struct plat_stmmacenet_data *plat_dat,
+			 struct stmmac_resources *stmmac_res)
+{
+	int err;
+
+	plat_dat->stmmac_clk = devm_clk_get(&pdev->dev, "apb_pclk");
+	if (IS_ERR(plat_dat->stmmac_clk)) {
+		dev_err(&pdev->dev, "apb_pclk clock not found.\n");
+		return PTR_ERR(plat_dat->stmmac_clk);
+	}
+
+	err = clk_prepare_enable(plat_dat->stmmac_clk);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to enable apb_pclk clock: %d\n",
+			err);
+		return err;
+	}
+
+	plat_dat->pclk = devm_clk_get(&pdev->dev, "phy_ref_clk");
+	if (IS_ERR(plat_dat->pclk)) {
+		dev_err(&pdev->dev, "phy_ref_clk clock not found.\n");
+		err = PTR_ERR(plat_dat->pclk);
+		goto disable;
+	}
+
+	err = clk_prepare_enable(plat_dat->pclk);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to enable phy_ref clock: %d\n",
+			err);
+		goto disable;
+	}
+
+	return 0;
+
+disable:
+	clk_disable_unprepare(plat_dat->stmmac_clk);
+	return err;
+}
+
+static void dwc_qos_remove(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct stmmac_priv *priv = netdev_priv(ndev);
+
+	clk_disable_unprepare(priv->plat->pclk);
+	clk_disable_unprepare(priv->plat->stmmac_clk);
+}
+
+#define SDMEMCOMPPADCTRL 0x8800
+#define  SDMEMCOMPPADCTRL_PAD_E_INPUT_OR_E_PWRD BIT(31)
+
+#define AUTO_CAL_CONFIG 0x8804
+#define  AUTO_CAL_CONFIG_START BIT(31)
+#define  AUTO_CAL_CONFIG_ENABLE BIT(29)
+
+#define AUTO_CAL_STATUS 0x880c
+#define  AUTO_CAL_STATUS_ACTIVE BIT(31)
+
+static void tegra_eqos_fix_speed(void *priv, unsigned int speed)
+{
+	struct tegra_eqos *eqos = priv;
+	unsigned long rate = 125000000;
+	bool needs_calibration = false;
+	u32 value;
+	int err;
+
+	switch (speed) {
+	case SPEED_1000:
+		needs_calibration = true;
+		rate = 125000000;
+		break;
+
+	case SPEED_100:
+		needs_calibration = true;
+		rate = 25000000;
+		break;
+
+	case SPEED_10:
+		rate = 2500000;
+		break;
+
+	default:
+		dev_err(eqos->dev, "invalid speed %u\n", speed);
+		break;
+	}
+
+	if (needs_calibration) {
+		/* calibrate */
+		value = readl(eqos->regs + SDMEMCOMPPADCTRL);
+		value |= SDMEMCOMPPADCTRL_PAD_E_INPUT_OR_E_PWRD;
+		writel(value, eqos->regs + SDMEMCOMPPADCTRL);
+
+		udelay(1);
+
+		value = readl(eqos->regs + AUTO_CAL_CONFIG);
+		value |= AUTO_CAL_CONFIG_START | AUTO_CAL_CONFIG_ENABLE;
+		writel(value, eqos->regs + AUTO_CAL_CONFIG);
+
+		err = readl_poll_timeout_atomic(eqos->regs + AUTO_CAL_STATUS,
+						value,
+						value & AUTO_CAL_STATUS_ACTIVE,
+						1, 10);
+		if (err < 0) {
+			dev_err(eqos->dev, "calibration did not start\n");
+			goto failed;
+		}
+
+		err = readl_poll_timeout_atomic(eqos->regs + AUTO_CAL_STATUS,
+						value,
+						(value & AUTO_CAL_STATUS_ACTIVE) == 0,
+						20, 200);
+		if (err < 0) {
+			dev_err(eqos->dev, "calibration didn't finish\n");
+			goto failed;
+		}
+
+	failed:
+		value = readl(eqos->regs + SDMEMCOMPPADCTRL);
+		value &= ~SDMEMCOMPPADCTRL_PAD_E_INPUT_OR_E_PWRD;
+		writel(value, eqos->regs + SDMEMCOMPPADCTRL);
+	} else {
+		value = readl(eqos->regs + AUTO_CAL_CONFIG);
+		value &= ~AUTO_CAL_CONFIG_ENABLE;
+		writel(value, eqos->regs + AUTO_CAL_CONFIG);
+	}
+
+	err = clk_set_rate(eqos->clk_tx, rate);
+	if (err < 0)
+		dev_err(eqos->dev, "failed to set TX rate: %d\n", err);
+}
+
+static int tegra_eqos_init(struct platform_device *pdev, void *priv)
+{
+	struct tegra_eqos *eqos = priv;
+	unsigned long rate;
+	u32 value;
+
+	rate = clk_get_rate(eqos->clk_slave);
+
+	value = (rate / 1000000) - 1;
+	writel(value, eqos->regs + GMAC_1US_TIC_COUNTER);
+
+	return 0;
+}
+
+static int tegra_eqos_probe(struct platform_device *pdev,
+			    struct plat_stmmacenet_data *data,
+			    struct stmmac_resources *res)
+{
+	struct device *dev = &pdev->dev;
+	struct tegra_eqos *eqos;
+	int err;
+
+	eqos = devm_kzalloc(&pdev->dev, sizeof(*eqos), GFP_KERNEL);
+	if (!eqos)
+		return -ENOMEM;
+
+	eqos->dev = &pdev->dev;
+	eqos->regs = res->addr;
+
+	if (!is_of_node(dev->fwnode))
+		goto bypass_clk_reset_gpio;
+
+	eqos->clk_master = devm_clk_get(&pdev->dev, "master_bus");
+	if (IS_ERR(eqos->clk_master)) {
+		err = PTR_ERR(eqos->clk_master);
+		goto error;
+	}
+
+	err = clk_prepare_enable(eqos->clk_master);
+	if (err < 0)
+		goto error;
+
+	eqos->clk_slave = devm_clk_get(&pdev->dev, "slave_bus");
+	if (IS_ERR(eqos->clk_slave)) {
+		err = PTR_ERR(eqos->clk_slave);
+		goto disable_master;
+	}
+
+	data->stmmac_clk = eqos->clk_slave;
+
+	err = clk_prepare_enable(eqos->clk_slave);
+	if (err < 0)
+		goto disable_master;
+
+	eqos->clk_rx = devm_clk_get(&pdev->dev, "rx");
+	if (IS_ERR(eqos->clk_rx)) {
+		err = PTR_ERR(eqos->clk_rx);
+		goto disable_slave;
+	}
+
+	err = clk_prepare_enable(eqos->clk_rx);
+	if (err < 0)
+		goto disable_slave;
+
+	eqos->clk_tx = devm_clk_get(&pdev->dev, "tx");
+	if (IS_ERR(eqos->clk_tx)) {
+		err = PTR_ERR(eqos->clk_tx);
+		goto disable_rx;
+	}
+
+	err = clk_prepare_enable(eqos->clk_tx);
+	if (err < 0)
+		goto disable_rx;
+
+	eqos->reset = devm_gpiod_get(&pdev->dev, "phy-reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(eqos->reset)) {
+		err = PTR_ERR(eqos->reset);
+		goto disable_tx;
+	}
+
+	usleep_range(2000, 4000);
+	gpiod_set_value(eqos->reset, 0);
+
+	/* MDIO bus was already reset just above */
+	data->mdio_bus_data->needs_reset = false;
+
+	eqos->rst = devm_reset_control_get(&pdev->dev, "eqos");
+	if (IS_ERR(eqos->rst)) {
+		err = PTR_ERR(eqos->rst);
+		goto reset_phy;
+	}
+
+	err = reset_control_assert(eqos->rst);
+	if (err < 0)
+		goto reset_phy;
+
+	usleep_range(2000, 4000);
+
+	err = reset_control_deassert(eqos->rst);
+	if (err < 0)
+		goto reset_phy;
+
+	usleep_range(2000, 4000);
+
+bypass_clk_reset_gpio:
+	data->fix_mac_speed = tegra_eqos_fix_speed;
+	data->init = tegra_eqos_init;
+	data->bsp_priv = eqos;
+	data->sph_disable = 1;
+
+	err = tegra_eqos_init(pdev, eqos);
+	if (err < 0)
+		goto reset;
+
+	return 0;
+reset:
+	reset_control_assert(eqos->rst);
+reset_phy:
+	gpiod_set_value(eqos->reset, 1);
+disable_tx:
+	clk_disable_unprepare(eqos->clk_tx);
+disable_rx:
+	clk_disable_unprepare(eqos->clk_rx);
+disable_slave:
+	clk_disable_unprepare(eqos->clk_slave);
+disable_master:
+	clk_disable_unprepare(eqos->clk_master);
+error:
+	return err;
+}
+
+static void tegra_eqos_remove(struct platform_device *pdev)
+{
+	struct tegra_eqos *eqos = get_stmmac_bsp_priv(&pdev->dev);
+
+	reset_control_assert(eqos->rst);
+	gpiod_set_value(eqos->reset, 1);
+	clk_disable_unprepare(eqos->clk_tx);
+	clk_disable_unprepare(eqos->clk_rx);
+	clk_disable_unprepare(eqos->clk_slave);
+	clk_disable_unprepare(eqos->clk_master);
+}
+
+struct dwc_eth_dwmac_data {
+	int (*probe)(struct platform_device *pdev,
+		     struct plat_stmmacenet_data *data,
+		     struct stmmac_resources *res);
+	void (*remove)(struct platform_device *pdev);
+};
+
+static const struct dwc_eth_dwmac_data dwc_qos_data = {
+	.probe = dwc_qos_probe,
+	.remove = dwc_qos_remove,
+};
+
+static const struct dwc_eth_dwmac_data tegra_eqos_data = {
+	.probe = tegra_eqos_probe,
+	.remove = tegra_eqos_remove,
+};
+
+static int dwc_eth_dwmac_probe(struct platform_device *pdev)
+{
+	const struct dwc_eth_dwmac_data *data;
+	struct plat_stmmacenet_data *plat_dat;
+	struct stmmac_resources stmmac_res;
+	int ret;
+
+	data = device_get_match_data(&pdev->dev);
+
+	memset(&stmmac_res, 0, sizeof(struct stmmac_resources));
+
+	/**
+	 * Since stmmac_platform supports name IRQ only, basic platform
+	 * resource initialization is done in the glue logic.
+	 */
+	stmmac_res.irq = platform_get_irq(pdev, 0);
+	if (stmmac_res.irq < 0)
+		return stmmac_res.irq;
+	stmmac_res.wol_irq = stmmac_res.irq;
+
+	stmmac_res.addr = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(stmmac_res.addr))
+		return PTR_ERR(stmmac_res.addr);
+
+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
+	if (IS_ERR(plat_dat))
+		return PTR_ERR(plat_dat);
+
+	ret = data->probe(pdev, plat_dat, &stmmac_res);
+	if (ret < 0) {
+		dev_err_probe(&pdev->dev, ret, "failed to probe subdriver\n");
+
+		goto remove_config;
+	}
+
+	ret = dwc_eth_dwmac_config_dt(pdev, plat_dat);
+	if (ret)
+		goto remove;
+
+	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+	if (ret)
+		goto remove;
+
+	return ret;
+
+remove:
+	data->remove(pdev);
+remove_config:
+	stmmac_remove_config_dt(pdev, plat_dat);
+
+	return ret;
+}
+
+static int dwc_eth_dwmac_remove(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct stmmac_priv *priv = netdev_priv(ndev);
+	const struct dwc_eth_dwmac_data *data;
+
+	data = device_get_match_data(&pdev->dev);
+
+	stmmac_dvr_remove(&pdev->dev);
+
+	data->remove(pdev);
+
+	stmmac_remove_config_dt(pdev, priv->plat);
+
+	return 0;
+}
+
+static const struct of_device_id dwc_eth_dwmac_match[] = {
+	{ .compatible = "snps,dwc-qos-ethernet-4.10", .data = &dwc_qos_data },
+	{ .compatible = "nvidia,tegra186-eqos", .data = &tegra_eqos_data },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, dwc_eth_dwmac_match);
+
+static struct platform_driver dwc_eth_dwmac_driver = {
+	.probe  = dwc_eth_dwmac_probe,
+	.remove = dwc_eth_dwmac_remove,
+	.driver = {
+		.name           = "dwc-eth-dwmac",
+		.pm             = &stmmac_pltfr_pm_ops,
+		.of_match_table = dwc_eth_dwmac_match,
+	},
+};
+module_platform_driver(dwc_eth_dwmac_driver);
+
+MODULE_AUTHOR("Joao Pinto <jpinto@synopsys.com>");
+MODULE_DESCRIPTION("Synopsys DWC Ethernet Quality-of-Service v4.10a driver");
+MODULE_LICENSE("GPL v2");