Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 186 insertions, 0 deletions

diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
new file mode 100644
index 000000000..fce06663e
--- /dev/null
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# TI device configuration
+#
+
+config NET_VENDOR_TI
+	bool "Texas Instruments (TI) devices"
+	default y
+	depends on PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3
+	help
+	  If you have a network (Ethernet) card belonging to this class, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about TI devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_TI
+
+config TI_DAVINCI_EMAC
+	tristate "TI DaVinci EMAC Support"
+	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 ) || COMPILE_TEST
+	select TI_DAVINCI_MDIO
+	select PHYLIB
+	select GENERIC_ALLOCATOR
+	help
+	  This driver supports TI's DaVinci Ethernet .
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called davinci_emac_driver.  This is recommended.
+
+config TI_DAVINCI_MDIO
+	tristate "TI DaVinci MDIO Support"
+	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
+	select PHYLIB
+	select MDIO_BITBANG
+	help
+	  This driver supports TI's DaVinci MDIO module.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called davinci_mdio.  This is recommended.
+
+config TI_CPSW_PHY_SEL
+	bool "TI CPSW Phy mode Selection (DEPRECATED)"
+	default n
+	help
+	  This driver supports configuring of the phy mode connected to
+	  the CPSW. DEPRECATED: use PHY_TI_GMII_SEL.
+
+config TI_CPSW
+	tristate "TI CPSW Switch Support"
+	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST
+	depends on TI_CPTS || !TI_CPTS
+	select TI_DAVINCI_MDIO
+	select MFD_SYSCON
+	select PAGE_POOL
+	select REGMAP
+	imply PHY_TI_GMII_SEL
+	help
+	  This driver supports TI's CPSW Ethernet Switch.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called cpsw.
+
+config TI_CPSW_SWITCHDEV
+	tristate "TI CPSW Switch Support with switchdev"
+	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST
+	depends on NET_SWITCHDEV
+	depends on TI_CPTS || !TI_CPTS
+	select PAGE_POOL
+	select TI_DAVINCI_MDIO
+	select MFD_SYSCON
+	select REGMAP
+	select NET_DEVLINK
+	imply PHY_TI_GMII_SEL
+	help
+	  This driver supports TI's CPSW Ethernet Switch.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called cpsw_new.
+
+config TI_CPTS
+	tristate "TI Common Platform Time Sync (CPTS) Support"
+	depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST
+	depends on COMMON_CLK
+	depends on PTP_1588_CLOCK
+	help
+	  This driver supports the Common Platform Time Sync unit of
+	  the CPSW Ethernet Switch and Keystone 2 1g/10g Switch Subsystem.
+	  The unit can time stamp PTP UDP/IPv4 and Layer 2 packets, and the
+	  driver offers a PTP Hardware Clock.
+
+config TI_K3_AM65_CPSW_NUSS
+	tristate "TI K3 AM654x/J721E CPSW Ethernet driver"
+	depends on ARCH_K3 && OF && TI_K3_UDMA_GLUE_LAYER
+	select NET_DEVLINK
+	select TI_DAVINCI_MDIO
+	select PHYLINK
+	imply PHY_TI_GMII_SEL
+	depends on TI_K3_AM65_CPTS || !TI_K3_AM65_CPTS
+	help
+	  This driver supports TI K3 AM654/J721E CPSW2G Ethernet SubSystem.
+	  The two-port Gigabit Ethernet MAC (MCU_CPSW0) subsystem provides
+	  Ethernet packet communication for the device: One Ethernet port
+	  (port 1) with selectable RGMII and RMII interfaces and an internal
+	  Communications Port Programming Interface (CPPI) port (port 0).
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ti-am65-cpsw-nuss.
+
+config TI_K3_AM65_CPSW_SWITCHDEV
+	bool "TI K3 AM654x/J721E CPSW Switch mode support"
+	depends on TI_K3_AM65_CPSW_NUSS
+	depends on NET_SWITCHDEV
+	help
+	 This enables switchdev support for TI K3 CPSWxG Ethernet
+	 Switch. Enable this driver to support hardware switch support for AM65
+	 CPSW NUSS driver.
+
+config TI_K3_AM65_CPTS
+	tristate "TI K3 AM65x CPTS"
+	depends on ARCH_K3 && OF
+	depends on PTP_1588_CLOCK
+	help
+	  Say y here to support the TI K3 AM65x CPTS with 1588 features such as
+	  PTP hardware clock for each CPTS device and network packets
+	  timestamping where applicable.
+	  Depending on integration CPTS blocks enable compliance with
+	  the IEEE 1588-2008 standard for a precision clock synchronization
+	  protocol, Ethernet Enhanced Scheduled Traffic Operations (CPTS_ESTFn)
+	  and PCIe Subsystem Precision Time Measurement (PTM).
+
+config TI_AM65_CPSW_TAS
+	bool "Enable TAS offload in AM65 CPSW"
+	depends on TI_K3_AM65_CPSW_NUSS && NET_SCH_TAPRIO && TI_K3_AM65_CPTS
+	help
+	  Say y here to support Time Aware Shaper(TAS) offload in AM65 CPSW.
+	  AM65 CPSW hardware supports Enhanced Scheduled Traffic (EST)
+	  defined in IEEE 802.1Q 2018. The EST scheduler runs on CPTS and the
+	  TAS/EST schedule is updated in the Fetch RAM memory of the CPSW.
+
+config TI_KEYSTONE_NETCP
+	tristate "TI Keystone NETCP Core Support"
+	select TI_DAVINCI_MDIO
+	depends on OF
+	depends on KEYSTONE_NAVIGATOR_DMA && KEYSTONE_NAVIGATOR_QMSS
+	depends on TI_CPTS || !TI_CPTS
+	help
+	  This driver supports TI's Keystone NETCP Core.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called keystone_netcp.
+
+config TI_KEYSTONE_NETCP_ETHSS
+	depends on TI_KEYSTONE_NETCP
+	tristate "TI Keystone NETCP Ethernet subsystem Support"
+	help
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called keystone_netcp_ethss.
+
+config TLAN
+	tristate "TI ThunderLAN support"
+	depends on (PCI || EISA)
+	help
+	  If you have a PCI Ethernet network card based on the ThunderLAN chip
+	  which is supported by this driver, say Y here.
+
+	  Devices currently supported by this driver are Compaq Netelligent,
+	  Compaq NetFlex and Olicom cards.  Please read the file
+	  <file:Documentation/networking/device_drivers/ethernet/ti/tlan.rst>
+	  for more details.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called tlan.
+
+	  Please email feedback to <torben.mathiasen@compaq.com>.
+
+config CPMAC
+	tristate "TI AR7 CPMAC Ethernet support"
+	depends on AR7
+	select PHYLIB
+	help
+	  TI AR7 CPMAC Ethernet support
+
+endif # NET_VENDOR_TI