Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 443 insertions, 0 deletions

diff --git a/drivers/net/mdio/of_mdio.c b/drivers/net/mdio/of_mdio.c
new file mode 100644
index 000000000..510822d6d
--- /dev/null
+++ b/drivers/net/mdio/of_mdio.c
@@ -0,0 +1,443 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * OF helpers for the MDIO (Ethernet PHY) API
+ *
+ * Copyright (c) 2009 Secret Lab Technologies, Ltd.
+ *
+ * This file provides helper functions for extracting PHY device information
+ * out of the OpenFirmware device tree and using it to populate an mii_bus.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/fwnode_mdio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
+
+#define DEFAULT_GPIO_RESET_DELAY	10	/* in microseconds */
+
+MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
+MODULE_LICENSE("GPL");
+
+/* Extract the clause 22 phy ID from the compatible string of the form
+ * ethernet-phy-idAAAA.BBBB */
+static int of_get_phy_id(struct device_node *device, u32 *phy_id)
+{
+	return fwnode_get_phy_id(of_fwnode_handle(device), phy_id);
+}
+
+int of_mdiobus_phy_device_register(struct mii_bus *mdio, struct phy_device *phy,
+				   struct device_node *child, u32 addr)
+{
+	return fwnode_mdiobus_phy_device_register(mdio, phy,
+						  of_fwnode_handle(child),
+						  addr);
+}
+EXPORT_SYMBOL(of_mdiobus_phy_device_register);
+
+static int of_mdiobus_register_phy(struct mii_bus *mdio,
+				    struct device_node *child, u32 addr)
+{
+	return fwnode_mdiobus_register_phy(mdio, of_fwnode_handle(child), addr);
+}
+
+static int of_mdiobus_register_device(struct mii_bus *mdio,
+				      struct device_node *child, u32 addr)
+{
+	struct fwnode_handle *fwnode = of_fwnode_handle(child);
+	struct mdio_device *mdiodev;
+	int rc;
+
+	mdiodev = mdio_device_create(mdio, addr);
+	if (IS_ERR(mdiodev))
+		return PTR_ERR(mdiodev);
+
+	/* Associate the OF node with the device structure so it
+	 * can be looked up later.
+	 */
+	fwnode_handle_get(fwnode);
+	device_set_node(&mdiodev->dev, fwnode);
+
+	/* All data is now stored in the mdiodev struct; register it. */
+	rc = mdio_device_register(mdiodev);
+	if (rc) {
+		device_set_node(&mdiodev->dev, NULL);
+		fwnode_handle_put(fwnode);
+		mdio_device_free(mdiodev);
+		return rc;
+	}
+
+	dev_dbg(&mdio->dev, "registered mdio device %pOFn at address %i\n",
+		child, addr);
+	return 0;
+}
+
+/* The following is a list of PHY compatible strings which appear in
+ * some DTBs. The compatible string is never matched against a PHY
+ * driver, so is pointless. We only expect devices which are not PHYs
+ * to have a compatible string, so they can be matched to an MDIO
+ * driver.  Encourage users to upgrade their DT blobs to remove these.
+ */
+static const struct of_device_id whitelist_phys[] = {
+	{ .compatible = "brcm,40nm-ephy" },
+	{ .compatible = "broadcom,bcm5241" },
+	{ .compatible = "marvell,88E1111", },
+	{ .compatible = "marvell,88e1116", },
+	{ .compatible = "marvell,88e1118", },
+	{ .compatible = "marvell,88e1145", },
+	{ .compatible = "marvell,88e1149r", },
+	{ .compatible = "marvell,88e1310", },
+	{ .compatible = "marvell,88E1510", },
+	{ .compatible = "marvell,88E1514", },
+	{ .compatible = "moxa,moxart-rtl8201cp", },
+	{}
+};
+
+/*
+ * Return true if the child node is for a phy. It must either:
+ * o Compatible string of "ethernet-phy-idX.X"
+ * o Compatible string of "ethernet-phy-ieee802.3-c45"
+ * o Compatible string of "ethernet-phy-ieee802.3-c22"
+ * o In the white list above (and issue a warning)
+ * o No compatibility string
+ *
+ * A device which is not a phy is expected to have a compatible string
+ * indicating what sort of device it is.
+ */
+bool of_mdiobus_child_is_phy(struct device_node *child)
+{
+	u32 phy_id;
+
+	if (of_get_phy_id(child, &phy_id) != -EINVAL)
+		return true;
+
+	if (of_device_is_compatible(child, "ethernet-phy-ieee802.3-c45"))
+		return true;
+
+	if (of_device_is_compatible(child, "ethernet-phy-ieee802.3-c22"))
+		return true;
+
+	if (of_match_node(whitelist_phys, child)) {
+		pr_warn(FW_WARN
+			"%pOF: Whitelisted compatible string. Please remove\n",
+			child);
+		return true;
+	}
+
+	if (!of_find_property(child, "compatible", NULL))
+		return true;
+
+	return false;
+}
+EXPORT_SYMBOL(of_mdiobus_child_is_phy);
+
+/**
+ * of_mdiobus_register - Register mii_bus and create PHYs from the device tree
+ * @mdio: pointer to mii_bus structure
+ * @np: pointer to device_node of MDIO bus.
+ *
+ * This function registers the mii_bus structure and registers a phy_device
+ * for each child node of @np.
+ */
+int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
+{
+	struct device_node *child;
+	bool scanphys = false;
+	int addr, rc;
+
+	if (!np)
+		return mdiobus_register(mdio);
+
+	/* Do not continue if the node is disabled */
+	if (!of_device_is_available(np))
+		return -ENODEV;
+
+	/* Mask out all PHYs from auto probing.  Instead the PHYs listed in
+	 * the device tree are populated after the bus has been registered */
+	mdio->phy_mask = ~0;
+
+	device_set_node(&mdio->dev, of_fwnode_handle(np));
+
+	/* Get bus level PHY reset GPIO details */
+	mdio->reset_delay_us = DEFAULT_GPIO_RESET_DELAY;
+	of_property_read_u32(np, "reset-delay-us", &mdio->reset_delay_us);
+	mdio->reset_post_delay_us = 0;
+	of_property_read_u32(np, "reset-post-delay-us", &mdio->reset_post_delay_us);
+
+	/* Register the MDIO bus */
+	rc = mdiobus_register(mdio);
+	if (rc)
+		return rc;
+
+	/* Loop over the child nodes and register a phy_device for each phy */
+	for_each_available_child_of_node(np, child) {
+		addr = of_mdio_parse_addr(&mdio->dev, child);
+		if (addr < 0) {
+			scanphys = true;
+			continue;
+		}
+
+		if (of_mdiobus_child_is_phy(child))
+			rc = of_mdiobus_register_phy(mdio, child, addr);
+		else
+			rc = of_mdiobus_register_device(mdio, child, addr);
+
+		if (rc == -ENODEV)
+			dev_err(&mdio->dev,
+				"MDIO device at address %d is missing.\n",
+				addr);
+		else if (rc)
+			goto unregister;
+	}
+
+	if (!scanphys)
+		return 0;
+
+	/* auto scan for PHYs with empty reg property */
+	for_each_available_child_of_node(np, child) {
+		/* Skip PHYs with reg property set */
+		if (of_find_property(child, "reg", NULL))
+			continue;
+
+		for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
+			/* skip already registered PHYs */
+			if (mdiobus_is_registered_device(mdio, addr))
+				continue;
+
+			/* be noisy to encourage people to set reg property */
+			dev_info(&mdio->dev, "scan phy %pOFn at address %i\n",
+				 child, addr);
+
+			if (of_mdiobus_child_is_phy(child)) {
+				/* -ENODEV is the return code that PHYLIB has
+				 * standardized on to indicate that bus
+				 * scanning should continue.
+				 */
+				rc = of_mdiobus_register_phy(mdio, child, addr);
+				if (!rc)
+					break;
+				if (rc != -ENODEV)
+					goto unregister;
+			}
+		}
+	}
+
+	return 0;
+
+unregister:
+	of_node_put(child);
+	mdiobus_unregister(mdio);
+	return rc;
+}
+EXPORT_SYMBOL(of_mdiobus_register);
+
+/**
+ * of_mdio_find_device - Given a device tree node, find the mdio_device
+ * @np: pointer to the mdio_device's device tree node
+ *
+ * If successful, returns a pointer to the mdio_device with the embedded
+ * struct device refcount incremented by one, or NULL on failure.
+ * The caller should call put_device() on the mdio_device after its use
+ */
+struct mdio_device *of_mdio_find_device(struct device_node *np)
+{
+	return fwnode_mdio_find_device(of_fwnode_handle(np));
+}
+EXPORT_SYMBOL(of_mdio_find_device);
+
+/**
+ * of_phy_find_device - Give a PHY node, find the phy_device
+ * @phy_np: Pointer to the phy's device tree node
+ *
+ * If successful, returns a pointer to the phy_device with the embedded
+ * struct device refcount incremented by one, or NULL on failure.
+ */
+struct phy_device *of_phy_find_device(struct device_node *phy_np)
+{
+	return fwnode_phy_find_device(of_fwnode_handle(phy_np));
+}
+EXPORT_SYMBOL(of_phy_find_device);
+
+/**
+ * of_phy_connect - Connect to the phy described in the device tree
+ * @dev: pointer to net_device claiming the phy
+ * @phy_np: Pointer to device tree node for the PHY
+ * @hndlr: Link state callback for the network device
+ * @flags: flags to pass to the PHY
+ * @iface: PHY data interface type
+ *
+ * If successful, returns a pointer to the phy_device with the embedded
+ * struct device refcount incremented by one, or NULL on failure. The
+ * refcount must be dropped by calling phy_disconnect() or phy_detach().
+ */
+struct phy_device *of_phy_connect(struct net_device *dev,
+				  struct device_node *phy_np,
+				  void (*hndlr)(struct net_device *), u32 flags,
+				  phy_interface_t iface)
+{
+	struct phy_device *phy = of_phy_find_device(phy_np);
+	int ret;
+
+	if (!phy)
+		return NULL;
+
+	phy->dev_flags |= flags;
+
+	ret = phy_connect_direct(dev, phy, hndlr, iface);
+
+	/* refcount is held by phy_connect_direct() on success */
+	put_device(&phy->mdio.dev);
+
+	return ret ? NULL : phy;
+}
+EXPORT_SYMBOL(of_phy_connect);
+
+/**
+ * of_phy_get_and_connect
+ * - Get phy node and connect to the phy described in the device tree
+ * @dev: pointer to net_device claiming the phy
+ * @np: Pointer to device tree node for the net_device claiming the phy
+ * @hndlr: Link state callback for the network device
+ *
+ * If successful, returns a pointer to the phy_device with the embedded
+ * struct device refcount incremented by one, or NULL on failure. The
+ * refcount must be dropped by calling phy_disconnect() or phy_detach().
+ */
+struct phy_device *of_phy_get_and_connect(struct net_device *dev,
+					  struct device_node *np,
+					  void (*hndlr)(struct net_device *))
+{
+	phy_interface_t iface;
+	struct device_node *phy_np;
+	struct phy_device *phy;
+	int ret;
+
+	ret = of_get_phy_mode(np, &iface);
+	if (ret)
+		return NULL;
+	if (of_phy_is_fixed_link(np)) {
+		ret = of_phy_register_fixed_link(np);
+		if (ret < 0) {
+			netdev_err(dev, "broken fixed-link specification\n");
+			return NULL;
+		}
+		phy_np = of_node_get(np);
+	} else {
+		phy_np = of_parse_phandle(np, "phy-handle", 0);
+		if (!phy_np)
+			return NULL;
+	}
+
+	phy = of_phy_connect(dev, phy_np, hndlr, 0, iface);
+
+	of_node_put(phy_np);
+
+	return phy;
+}
+EXPORT_SYMBOL(of_phy_get_and_connect);
+
+/*
+ * of_phy_is_fixed_link() and of_phy_register_fixed_link() must
+ * support two DT bindings:
+ * - the old DT binding, where 'fixed-link' was a property with 5
+ *   cells encoding various information about the fixed PHY
+ * - the new DT binding, where 'fixed-link' is a sub-node of the
+ *   Ethernet device.
+ */
+bool of_phy_is_fixed_link(struct device_node *np)
+{
+	struct device_node *dn;
+	int len, err;
+	const char *managed;
+
+	/* New binding */
+	dn = of_get_child_by_name(np, "fixed-link");
+	if (dn) {
+		of_node_put(dn);
+		return true;
+	}
+
+	err = of_property_read_string(np, "managed", &managed);
+	if (err == 0 && strcmp(managed, "auto") != 0)
+		return true;
+
+	/* Old binding */
+	if (of_get_property(np, "fixed-link", &len) &&
+	    len == (5 * sizeof(__be32)))
+		return true;
+
+	return false;
+}
+EXPORT_SYMBOL(of_phy_is_fixed_link);
+
+int of_phy_register_fixed_link(struct device_node *np)
+{
+	struct fixed_phy_status status = {};
+	struct device_node *fixed_link_node;
+	u32 fixed_link_prop[5];
+	const char *managed;
+
+	if (of_property_read_string(np, "managed", &managed) == 0 &&
+	    strcmp(managed, "in-band-status") == 0) {
+		/* status is zeroed, namely its .link member */
+		goto register_phy;
+	}
+
+	/* New binding */
+	fixed_link_node = of_get_child_by_name(np, "fixed-link");
+	if (fixed_link_node) {
+		status.link = 1;
+		status.duplex = of_property_read_bool(fixed_link_node,
+						      "full-duplex");
+		if (of_property_read_u32(fixed_link_node, "speed",
+					 &status.speed)) {
+			of_node_put(fixed_link_node);
+			return -EINVAL;
+		}
+		status.pause = of_property_read_bool(fixed_link_node, "pause");
+		status.asym_pause = of_property_read_bool(fixed_link_node,
+							  "asym-pause");
+		of_node_put(fixed_link_node);
+
+		goto register_phy;
+	}
+
+	/* Old binding */
+	if (of_property_read_u32_array(np, "fixed-link", fixed_link_prop,
+				       ARRAY_SIZE(fixed_link_prop)) == 0) {
+		status.link = 1;
+		status.duplex = fixed_link_prop[1];
+		status.speed  = fixed_link_prop[2];
+		status.pause  = fixed_link_prop[3];
+		status.asym_pause = fixed_link_prop[4];
+		goto register_phy;
+	}
+
+	return -ENODEV;
+
+register_phy:
+	return PTR_ERR_OR_ZERO(fixed_phy_register(PHY_POLL, &status, np));
+}
+EXPORT_SYMBOL(of_phy_register_fixed_link);
+
+void of_phy_deregister_fixed_link(struct device_node *np)
+{
+	struct phy_device *phydev;
+
+	phydev = of_phy_find_device(np);
+	if (!phydev)
+		return;
+
+	fixed_phy_unregister(phydev);
+
+	put_device(&phydev->mdio.dev);	/* of_phy_find_device() */
+	phy_device_free(phydev);	/* fixed_phy_register() */
+}
+EXPORT_SYMBOL(of_phy_deregister_fixed_link);