Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 821 insertions, 0 deletions

diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c
new file mode 100644
index 000000000..b2c0baa51
--- /dev/null
+++ b/drivers/net/phy/bcm-phy-lib.c
@@ -0,0 +1,821 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015-2017 Broadcom
+ */
+
+#include "bcm-phy-lib.h"
+#include <linux/bitfield.h>
+#include <linux/brcmphy.h>
+#include <linux/export.h>
+#include <linux/mdio.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/ethtool.h>
+#include <linux/ethtool_netlink.h>
+
+#define MII_BCM_CHANNEL_WIDTH     0x2000
+#define BCM_CL45VEN_EEE_ADV       0x3c
+
+int __bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val)
+{
+	int rc;
+
+	rc = __phy_write(phydev, MII_BCM54XX_EXP_SEL, reg);
+	if (rc < 0)
+		return rc;
+
+	return __phy_write(phydev, MII_BCM54XX_EXP_DATA, val);
+}
+EXPORT_SYMBOL_GPL(__bcm_phy_write_exp);
+
+int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val)
+{
+	int rc;
+
+	phy_lock_mdio_bus(phydev);
+	rc = __bcm_phy_write_exp(phydev, reg, val);
+	phy_unlock_mdio_bus(phydev);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_write_exp);
+
+int __bcm_phy_read_exp(struct phy_device *phydev, u16 reg)
+{
+	int val;
+
+	val = __phy_write(phydev, MII_BCM54XX_EXP_SEL, reg);
+	if (val < 0)
+		return val;
+
+	val = __phy_read(phydev, MII_BCM54XX_EXP_DATA);
+
+	/* Restore default value.  It's O.K. if this write fails. */
+	__phy_write(phydev, MII_BCM54XX_EXP_SEL, 0);
+
+	return val;
+}
+EXPORT_SYMBOL_GPL(__bcm_phy_read_exp);
+
+int bcm_phy_read_exp(struct phy_device *phydev, u16 reg)
+{
+	int rc;
+
+	phy_lock_mdio_bus(phydev);
+	rc = __bcm_phy_read_exp(phydev, reg);
+	phy_unlock_mdio_bus(phydev);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_read_exp);
+
+int __bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set)
+{
+	int new, ret;
+
+	ret = __phy_write(phydev, MII_BCM54XX_EXP_SEL, reg);
+	if (ret < 0)
+		return ret;
+
+	ret = __phy_read(phydev, MII_BCM54XX_EXP_DATA);
+	if (ret < 0)
+		return ret;
+
+	new = (ret & ~mask) | set;
+	if (new == ret)
+		return 0;
+
+	return __phy_write(phydev, MII_BCM54XX_EXP_DATA, new);
+}
+EXPORT_SYMBOL_GPL(__bcm_phy_modify_exp);
+
+int bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set)
+{
+	int ret;
+
+	phy_lock_mdio_bus(phydev);
+	ret = __bcm_phy_modify_exp(phydev, reg, mask, set);
+	phy_unlock_mdio_bus(phydev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_modify_exp);
+
+int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum)
+{
+	/* The register must be written to both the Shadow Register Select and
+	 * the Shadow Read Register Selector
+	 */
+	phy_write(phydev, MII_BCM54XX_AUX_CTL, MII_BCM54XX_AUXCTL_SHDWSEL_MASK |
+		  regnum << MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT);
+	return phy_read(phydev, MII_BCM54XX_AUX_CTL);
+}
+EXPORT_SYMBOL_GPL(bcm54xx_auxctl_read);
+
+int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val)
+{
+	return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val);
+}
+EXPORT_SYMBOL(bcm54xx_auxctl_write);
+
+int bcm_phy_write_misc(struct phy_device *phydev,
+		       u16 reg, u16 chl, u16 val)
+{
+	int rc;
+	int tmp;
+
+	rc = phy_write(phydev, MII_BCM54XX_AUX_CTL,
+		       MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+	if (rc < 0)
+		return rc;
+
+	tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL);
+	tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA;
+	rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp);
+	if (rc < 0)
+		return rc;
+
+	tmp = (chl * MII_BCM_CHANNEL_WIDTH) | reg;
+	rc = bcm_phy_write_exp(phydev, tmp, val);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_write_misc);
+
+int bcm_phy_read_misc(struct phy_device *phydev,
+		      u16 reg, u16 chl)
+{
+	int rc;
+	int tmp;
+
+	rc = phy_write(phydev, MII_BCM54XX_AUX_CTL,
+		       MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+	if (rc < 0)
+		return rc;
+
+	tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL);
+	tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA;
+	rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp);
+	if (rc < 0)
+		return rc;
+
+	tmp = (chl * MII_BCM_CHANNEL_WIDTH) | reg;
+	rc = bcm_phy_read_exp(phydev, tmp);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_read_misc);
+
+int bcm_phy_ack_intr(struct phy_device *phydev)
+{
+	int reg;
+
+	/* Clear pending interrupts.  */
+	reg = phy_read(phydev, MII_BCM54XX_ISR);
+	if (reg < 0)
+		return reg;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_ack_intr);
+
+int bcm_phy_config_intr(struct phy_device *phydev)
+{
+	int reg, err;
+
+	reg = phy_read(phydev, MII_BCM54XX_ECR);
+	if (reg < 0)
+		return reg;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		err = bcm_phy_ack_intr(phydev);
+		if (err)
+			return err;
+
+		reg &= ~MII_BCM54XX_ECR_IM;
+		err = phy_write(phydev, MII_BCM54XX_ECR, reg);
+	} else {
+		reg |= MII_BCM54XX_ECR_IM;
+		err = phy_write(phydev, MII_BCM54XX_ECR, reg);
+		if (err)
+			return err;
+
+		err = bcm_phy_ack_intr(phydev);
+	}
+	return err;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_config_intr);
+
+irqreturn_t bcm_phy_handle_interrupt(struct phy_device *phydev)
+{
+	int irq_status, irq_mask;
+
+	irq_status = phy_read(phydev, MII_BCM54XX_ISR);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	/* If a bit from the Interrupt Mask register is set, the corresponding
+	 * bit from the Interrupt Status register is masked. So read the IMR
+	 * and then flip the bits to get the list of possible interrupt
+	 * sources.
+	 */
+	irq_mask = phy_read(phydev, MII_BCM54XX_IMR);
+	if (irq_mask < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+	irq_mask = ~irq_mask;
+
+	if (!(irq_status & irq_mask))
+		return IRQ_NONE;
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_handle_interrupt);
+
+int bcm_phy_read_shadow(struct phy_device *phydev, u16 shadow)
+{
+	phy_write(phydev, MII_BCM54XX_SHD, MII_BCM54XX_SHD_VAL(shadow));
+	return MII_BCM54XX_SHD_DATA(phy_read(phydev, MII_BCM54XX_SHD));
+}
+EXPORT_SYMBOL_GPL(bcm_phy_read_shadow);
+
+int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow,
+			 u16 val)
+{
+	return phy_write(phydev, MII_BCM54XX_SHD,
+			 MII_BCM54XX_SHD_WRITE |
+			 MII_BCM54XX_SHD_VAL(shadow) |
+			 MII_BCM54XX_SHD_DATA(val));
+}
+EXPORT_SYMBOL_GPL(bcm_phy_write_shadow);
+
+int __bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb)
+{
+	int val;
+
+	val = __phy_write(phydev, MII_BCM54XX_RDB_ADDR, rdb);
+	if (val < 0)
+		return val;
+
+	return __phy_read(phydev, MII_BCM54XX_RDB_DATA);
+}
+EXPORT_SYMBOL_GPL(__bcm_phy_read_rdb);
+
+int bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb)
+{
+	int ret;
+
+	phy_lock_mdio_bus(phydev);
+	ret = __bcm_phy_read_rdb(phydev, rdb);
+	phy_unlock_mdio_bus(phydev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_read_rdb);
+
+int __bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val)
+{
+	int ret;
+
+	ret = __phy_write(phydev, MII_BCM54XX_RDB_ADDR, rdb);
+	if (ret < 0)
+		return ret;
+
+	return __phy_write(phydev, MII_BCM54XX_RDB_DATA, val);
+}
+EXPORT_SYMBOL_GPL(__bcm_phy_write_rdb);
+
+int bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val)
+{
+	int ret;
+
+	phy_lock_mdio_bus(phydev);
+	ret = __bcm_phy_write_rdb(phydev, rdb, val);
+	phy_unlock_mdio_bus(phydev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_write_rdb);
+
+int __bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask, u16 set)
+{
+	int new, ret;
+
+	ret = __phy_write(phydev, MII_BCM54XX_RDB_ADDR, rdb);
+	if (ret < 0)
+		return ret;
+
+	ret = __phy_read(phydev, MII_BCM54XX_RDB_DATA);
+	if (ret < 0)
+		return ret;
+
+	new = (ret & ~mask) | set;
+	if (new == ret)
+		return 0;
+
+	return __phy_write(phydev, MII_BCM54XX_RDB_DATA, new);
+}
+EXPORT_SYMBOL_GPL(__bcm_phy_modify_rdb);
+
+int bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask, u16 set)
+{
+	int ret;
+
+	phy_lock_mdio_bus(phydev);
+	ret = __bcm_phy_modify_rdb(phydev, rdb, mask, set);
+	phy_unlock_mdio_bus(phydev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_modify_rdb);
+
+int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down)
+{
+	int val;
+
+	if (dll_pwr_down) {
+		val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3);
+		if (val < 0)
+			return val;
+
+		val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
+		bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR3, val);
+	}
+
+	val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_APD);
+	if (val < 0)
+		return val;
+
+	/* Clear APD bits */
+	val &= BCM_APD_CLR_MASK;
+
+	if (phydev->autoneg == AUTONEG_ENABLE)
+		val |= BCM54XX_SHD_APD_EN;
+	else
+		val |= BCM_NO_ANEG_APD_EN;
+
+	/* Enable energy detect single link pulse for easy wakeup */
+	val |= BCM_APD_SINGLELP_EN;
+
+	/* Enable Auto Power-Down (APD) for the PHY */
+	return bcm_phy_write_shadow(phydev, BCM54XX_SHD_APD, val);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_enable_apd);
+
+int bcm_phy_set_eee(struct phy_device *phydev, bool enable)
+{
+	int val, mask = 0;
+
+	/* Enable EEE at PHY level */
+	val = phy_read_mmd(phydev, MDIO_MMD_AN, BRCM_CL45VEN_EEE_CONTROL);
+	if (val < 0)
+		return val;
+
+	if (enable)
+		val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
+	else
+		val &= ~(LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X);
+
+	phy_write_mmd(phydev, MDIO_MMD_AN, BRCM_CL45VEN_EEE_CONTROL, (u32)val);
+
+	/* Advertise EEE */
+	val = phy_read_mmd(phydev, MDIO_MMD_AN, BCM_CL45VEN_EEE_ADV);
+	if (val < 0)
+		return val;
+
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+			      phydev->supported))
+		mask |= MDIO_EEE_1000T;
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+			      phydev->supported))
+		mask |= MDIO_EEE_100TX;
+
+	if (enable)
+		val |= mask;
+	else
+		val &= ~mask;
+
+	phy_write_mmd(phydev, MDIO_MMD_AN, BCM_CL45VEN_EEE_ADV, (u32)val);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_set_eee);
+
+int bcm_phy_downshift_get(struct phy_device *phydev, u8 *count)
+{
+	int val;
+
+	val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+	if (val < 0)
+		return val;
+
+	/* Check if wirespeed is enabled or not */
+	if (!(val & MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN)) {
+		*count = DOWNSHIFT_DEV_DISABLE;
+		return 0;
+	}
+
+	val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR2);
+	if (val < 0)
+		return val;
+
+	/* Downgrade after one link attempt */
+	if (val & BCM54XX_SHD_SCR2_WSPD_RTRY_DIS) {
+		*count = 1;
+	} else {
+		/* Downgrade after configured retry count */
+		val >>= BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_SHIFT;
+		val &= BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_MASK;
+		*count = val + BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_OFFSET;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_downshift_get);
+
+int bcm_phy_downshift_set(struct phy_device *phydev, u8 count)
+{
+	int val = 0, ret = 0;
+
+	/* Range check the number given */
+	if (count - BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_OFFSET >
+	    BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_MASK &&
+	    count != DOWNSHIFT_DEV_DEFAULT_COUNT) {
+		return -ERANGE;
+	}
+
+	val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+	if (val < 0)
+		return val;
+
+	/* Se the write enable bit */
+	val |= MII_BCM54XX_AUXCTL_MISC_WREN;
+
+	if (count == DOWNSHIFT_DEV_DISABLE) {
+		val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN;
+		return bcm54xx_auxctl_write(phydev,
+					    MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
+					    val);
+	} else {
+		val |= MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN;
+		ret = bcm54xx_auxctl_write(phydev,
+					   MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
+					   val);
+		if (ret < 0)
+			return ret;
+	}
+
+	val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR2);
+	val &= ~(BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_MASK <<
+		 BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_SHIFT |
+		 BCM54XX_SHD_SCR2_WSPD_RTRY_DIS);
+
+	switch (count) {
+	case 1:
+		val |= BCM54XX_SHD_SCR2_WSPD_RTRY_DIS;
+		break;
+	case DOWNSHIFT_DEV_DEFAULT_COUNT:
+		val |= 1 << BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_SHIFT;
+		break;
+	default:
+		val |= (count - BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_OFFSET) <<
+			BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_SHIFT;
+		break;
+	}
+
+	return bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR2, val);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_downshift_set);
+
+struct bcm_phy_hw_stat {
+	const char *string;
+	u8 reg;
+	u8 shift;
+	u8 bits;
+};
+
+/* Counters freeze at either 0xffff or 0xff, better than nothing */
+static const struct bcm_phy_hw_stat bcm_phy_hw_stats[] = {
+	{ "phy_receive_errors", MII_BRCM_CORE_BASE12, 0, 16 },
+	{ "phy_serdes_ber_errors", MII_BRCM_CORE_BASE13, 8, 8 },
+	{ "phy_false_carrier_sense_errors", MII_BRCM_CORE_BASE13, 0, 8 },
+	{ "phy_local_rcvr_nok", MII_BRCM_CORE_BASE14, 8, 8 },
+	{ "phy_remote_rcv_nok", MII_BRCM_CORE_BASE14, 0, 8 },
+};
+
+int bcm_phy_get_sset_count(struct phy_device *phydev)
+{
+	return ARRAY_SIZE(bcm_phy_hw_stats);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_get_sset_count);
+
+void bcm_phy_get_strings(struct phy_device *phydev, u8 *data)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(bcm_phy_hw_stats); i++)
+		strscpy(data + i * ETH_GSTRING_LEN,
+			bcm_phy_hw_stats[i].string, ETH_GSTRING_LEN);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_get_strings);
+
+/* Caller is supposed to provide appropriate storage for the library code to
+ * access the shadow copy
+ */
+static u64 bcm_phy_get_stat(struct phy_device *phydev, u64 *shadow,
+			    unsigned int i)
+{
+	struct bcm_phy_hw_stat stat = bcm_phy_hw_stats[i];
+	int val;
+	u64 ret;
+
+	val = phy_read(phydev, stat.reg);
+	if (val < 0) {
+		ret = U64_MAX;
+	} else {
+		val >>= stat.shift;
+		val = val & ((1 << stat.bits) - 1);
+		shadow[i] += val;
+		ret = shadow[i];
+	}
+
+	return ret;
+}
+
+void bcm_phy_get_stats(struct phy_device *phydev, u64 *shadow,
+		       struct ethtool_stats *stats, u64 *data)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(bcm_phy_hw_stats); i++)
+		data[i] = bcm_phy_get_stat(phydev, shadow, i);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_get_stats);
+
+void bcm_phy_r_rc_cal_reset(struct phy_device *phydev)
+{
+	/* Reset R_CAL/RC_CAL Engine */
+	bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0010);
+
+	/* Disable Reset R_AL/RC_CAL Engine */
+	bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0000);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_r_rc_cal_reset);
+
+int bcm_phy_28nm_a0b0_afe_config_init(struct phy_device *phydev)
+{
+	/* Increase VCO range to prevent unlocking problem of PLL at low
+	 * temp
+	 */
+	bcm_phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048);
+
+	/* Change Ki to 011 */
+	bcm_phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b);
+
+	/* Disable loading of TVCO buffer to bandgap, set bandgap trim
+	 * to 111
+	 */
+	bcm_phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20);
+
+	/* Adjust bias current trim by -3 */
+	bcm_phy_write_misc(phydev, DSP_TAP10, 0x690b);
+
+	/* Switch to CORE_BASE1E */
+	phy_write(phydev, MII_BRCM_CORE_BASE1E, 0xd);
+
+	bcm_phy_r_rc_cal_reset(phydev);
+
+	/* write AFE_RXCONFIG_0 */
+	bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
+
+	/* write AFE_RXCONFIG_1 */
+	bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
+
+	/* write AFE_RX_LP_COUNTER */
+	bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
+
+	/* write AFE_HPF_TRIM_OTHERS */
+	bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
+
+	/* write AFTE_TX_CONFIG */
+	bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_28nm_a0b0_afe_config_init);
+
+int bcm_phy_enable_jumbo(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL);
+	if (ret < 0)
+		return ret;
+
+	/* Enable extended length packet reception */
+	ret = bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
+				   ret | MII_BCM54XX_AUXCTL_ACTL_EXT_PKT_LEN);
+	if (ret < 0)
+		return ret;
+
+	/* Enable the elastic FIFO for raising the transmission limit from
+	 * 4.5KB to 10KB, at the expense of an additional 16 ns in propagation
+	 * latency.
+	 */
+	return phy_set_bits(phydev, MII_BCM54XX_ECR, MII_BCM54XX_ECR_FIFOE);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_enable_jumbo);
+
+static int __bcm_phy_enable_rdb_access(struct phy_device *phydev)
+{
+	return __bcm_phy_write_exp(phydev, BCM54XX_EXP_REG7E, 0);
+}
+
+static int __bcm_phy_enable_legacy_access(struct phy_device *phydev)
+{
+	return __bcm_phy_write_rdb(phydev, BCM54XX_RDB_REG0087,
+				   BCM54XX_ACCESS_MODE_LEGACY_EN);
+}
+
+static int _bcm_phy_cable_test_start(struct phy_device *phydev, bool is_rdb)
+{
+	u16 mask, set;
+	int ret;
+
+	/* Auto-negotiation must be enabled for cable diagnostics to work, but
+	 * don't advertise any capabilities.
+	 */
+	phy_write(phydev, MII_BMCR, BMCR_ANENABLE);
+	phy_write(phydev, MII_ADVERTISE, ADVERTISE_CSMA);
+	phy_write(phydev, MII_CTRL1000, 0);
+
+	phy_lock_mdio_bus(phydev);
+	if (is_rdb) {
+		ret = __bcm_phy_enable_legacy_access(phydev);
+		if (ret)
+			goto out;
+	}
+
+	mask = BCM54XX_ECD_CTRL_CROSS_SHORT_DIS | BCM54XX_ECD_CTRL_UNIT_MASK;
+	set = BCM54XX_ECD_CTRL_RUN | BCM54XX_ECD_CTRL_BREAK_LINK |
+	      FIELD_PREP(BCM54XX_ECD_CTRL_UNIT_MASK,
+			 BCM54XX_ECD_CTRL_UNIT_CM);
+
+	ret = __bcm_phy_modify_exp(phydev, BCM54XX_EXP_ECD_CTRL, mask, set);
+
+out:
+	/* re-enable the RDB access even if there was an error */
+	if (is_rdb)
+		ret = __bcm_phy_enable_rdb_access(phydev) ? : ret;
+
+	phy_unlock_mdio_bus(phydev);
+
+	return ret;
+}
+
+static int bcm_phy_cable_test_report_trans(int result)
+{
+	switch (result) {
+	case BCM54XX_ECD_FAULT_TYPE_OK:
+		return ETHTOOL_A_CABLE_RESULT_CODE_OK;
+	case BCM54XX_ECD_FAULT_TYPE_OPEN:
+		return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
+	case BCM54XX_ECD_FAULT_TYPE_SAME_SHORT:
+		return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
+	case BCM54XX_ECD_FAULT_TYPE_CROSS_SHORT:
+		return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT;
+	case BCM54XX_ECD_FAULT_TYPE_INVALID:
+	case BCM54XX_ECD_FAULT_TYPE_BUSY:
+	default:
+		return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
+	}
+}
+
+static bool bcm_phy_distance_valid(int result)
+{
+	switch (result) {
+	case BCM54XX_ECD_FAULT_TYPE_OPEN:
+	case BCM54XX_ECD_FAULT_TYPE_SAME_SHORT:
+	case BCM54XX_ECD_FAULT_TYPE_CROSS_SHORT:
+		return true;
+	}
+	return false;
+}
+
+static int bcm_phy_report_length(struct phy_device *phydev, int pair)
+{
+	int val;
+
+	val = __bcm_phy_read_exp(phydev,
+				 BCM54XX_EXP_ECD_PAIR_A_LENGTH_RESULTS + pair);
+	if (val < 0)
+		return val;
+
+	if (val == BCM54XX_ECD_LENGTH_RESULTS_INVALID)
+		return 0;
+
+	ethnl_cable_test_fault_length(phydev, pair, val);
+
+	return 0;
+}
+
+static int _bcm_phy_cable_test_get_status(struct phy_device *phydev,
+					  bool *finished, bool is_rdb)
+{
+	int pair_a, pair_b, pair_c, pair_d, ret;
+
+	*finished = false;
+
+	phy_lock_mdio_bus(phydev);
+
+	if (is_rdb) {
+		ret = __bcm_phy_enable_legacy_access(phydev);
+		if (ret)
+			goto out;
+	}
+
+	ret = __bcm_phy_read_exp(phydev, BCM54XX_EXP_ECD_CTRL);
+	if (ret < 0)
+		goto out;
+
+	if (ret & BCM54XX_ECD_CTRL_IN_PROGRESS) {
+		ret = 0;
+		goto out;
+	}
+
+	ret = __bcm_phy_read_exp(phydev, BCM54XX_EXP_ECD_FAULT_TYPE);
+	if (ret < 0)
+		goto out;
+
+	pair_a = FIELD_GET(BCM54XX_ECD_FAULT_TYPE_PAIR_A_MASK, ret);
+	pair_b = FIELD_GET(BCM54XX_ECD_FAULT_TYPE_PAIR_B_MASK, ret);
+	pair_c = FIELD_GET(BCM54XX_ECD_FAULT_TYPE_PAIR_C_MASK, ret);
+	pair_d = FIELD_GET(BCM54XX_ECD_FAULT_TYPE_PAIR_D_MASK, ret);
+
+	ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A,
+				bcm_phy_cable_test_report_trans(pair_a));
+	ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_B,
+				bcm_phy_cable_test_report_trans(pair_b));
+	ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_C,
+				bcm_phy_cable_test_report_trans(pair_c));
+	ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_D,
+				bcm_phy_cable_test_report_trans(pair_d));
+
+	if (bcm_phy_distance_valid(pair_a))
+		bcm_phy_report_length(phydev, 0);
+	if (bcm_phy_distance_valid(pair_b))
+		bcm_phy_report_length(phydev, 1);
+	if (bcm_phy_distance_valid(pair_c))
+		bcm_phy_report_length(phydev, 2);
+	if (bcm_phy_distance_valid(pair_d))
+		bcm_phy_report_length(phydev, 3);
+
+	ret = 0;
+	*finished = true;
+out:
+	/* re-enable the RDB access even if there was an error */
+	if (is_rdb)
+		ret = __bcm_phy_enable_rdb_access(phydev) ? : ret;
+
+	phy_unlock_mdio_bus(phydev);
+
+	return ret;
+}
+
+int bcm_phy_cable_test_start(struct phy_device *phydev)
+{
+	return _bcm_phy_cable_test_start(phydev, false);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_cable_test_start);
+
+int bcm_phy_cable_test_get_status(struct phy_device *phydev, bool *finished)
+{
+	return _bcm_phy_cable_test_get_status(phydev, finished, false);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_cable_test_get_status);
+
+/* We assume that all PHYs which support RDB access can be switched to legacy
+ * mode. If, in the future, this is not true anymore, we have to re-implement
+ * this with RDB access.
+ */
+int bcm_phy_cable_test_start_rdb(struct phy_device *phydev)
+{
+	return _bcm_phy_cable_test_start(phydev, true);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_cable_test_start_rdb);
+
+int bcm_phy_cable_test_get_status_rdb(struct phy_device *phydev,
+				      bool *finished)
+{
+	return _bcm_phy_cable_test_get_status(phydev, finished, true);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_cable_test_get_status_rdb);
+
+MODULE_DESCRIPTION("Broadcom PHY Library");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Broadcom Corporation");