Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 414 insertions, 0 deletions

diff --git a/drivers/net/phy/dp83tc811.c b/drivers/net/phy/dp83tc811.c
new file mode 100644
index 000000000..7ea32fb77
--- /dev/null
+++ b/drivers/net/phy/dp83tc811.c
@@ -0,0 +1,414 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the Texas Instruments DP83TC811 PHY
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ */
+
+#include <linux/ethtool.h>
+#include <linux/etherdevice.h>
+#include <linux/kernel.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+
+#define DP83TC811_PHY_ID	0x2000a253
+#define DP83811_DEVADDR		0x1f
+
+#define MII_DP83811_SGMII_CTRL	0x09
+#define MII_DP83811_INT_STAT1	0x12
+#define MII_DP83811_INT_STAT2	0x13
+#define MII_DP83811_INT_STAT3	0x18
+#define MII_DP83811_RESET_CTRL	0x1f
+
+#define DP83811_HW_RESET	BIT(15)
+#define DP83811_SW_RESET	BIT(14)
+
+/* INT_STAT1 bits */
+#define DP83811_RX_ERR_HF_INT_EN	BIT(0)
+#define DP83811_MS_TRAINING_INT_EN	BIT(1)
+#define DP83811_ANEG_COMPLETE_INT_EN	BIT(2)
+#define DP83811_ESD_EVENT_INT_EN	BIT(3)
+#define DP83811_WOL_INT_EN		BIT(4)
+#define DP83811_LINK_STAT_INT_EN	BIT(5)
+#define DP83811_ENERGY_DET_INT_EN	BIT(6)
+#define DP83811_LINK_QUAL_INT_EN	BIT(7)
+
+/* INT_STAT2 bits */
+#define DP83811_JABBER_DET_INT_EN	BIT(0)
+#define DP83811_POLARITY_INT_EN		BIT(1)
+#define DP83811_SLEEP_MODE_INT_EN	BIT(2)
+#define DP83811_OVERTEMP_INT_EN		BIT(3)
+#define DP83811_OVERVOLTAGE_INT_EN	BIT(6)
+#define DP83811_UNDERVOLTAGE_INT_EN	BIT(7)
+
+/* INT_STAT3 bits */
+#define DP83811_LPS_INT_EN	BIT(0)
+#define DP83811_NO_FRAME_INT_EN	BIT(3)
+#define DP83811_POR_DONE_INT_EN	BIT(4)
+
+#define MII_DP83811_RXSOP1	0x04a5
+#define MII_DP83811_RXSOP2	0x04a6
+#define MII_DP83811_RXSOP3	0x04a7
+
+/* WoL Registers */
+#define MII_DP83811_WOL_CFG	0x04a0
+#define MII_DP83811_WOL_STAT	0x04a1
+#define MII_DP83811_WOL_DA1	0x04a2
+#define MII_DP83811_WOL_DA2	0x04a3
+#define MII_DP83811_WOL_DA3	0x04a4
+
+/* WoL bits */
+#define DP83811_WOL_MAGIC_EN	BIT(0)
+#define DP83811_WOL_SECURE_ON	BIT(5)
+#define DP83811_WOL_EN		BIT(7)
+#define DP83811_WOL_INDICATION_SEL BIT(8)
+#define DP83811_WOL_CLR_INDICATION BIT(11)
+
+/* SGMII CTRL bits */
+#define DP83811_TDR_AUTO		BIT(8)
+#define DP83811_SGMII_EN		BIT(12)
+#define DP83811_SGMII_AUTO_NEG_EN	BIT(13)
+#define DP83811_SGMII_TX_ERR_DIS	BIT(14)
+#define DP83811_SGMII_SOFT_RESET	BIT(15)
+
+static int dp83811_ack_interrupt(struct phy_device *phydev)
+{
+	int err;
+
+	err = phy_read(phydev, MII_DP83811_INT_STAT1);
+	if (err < 0)
+		return err;
+
+	err = phy_read(phydev, MII_DP83811_INT_STAT2);
+	if (err < 0)
+		return err;
+
+	err = phy_read(phydev, MII_DP83811_INT_STAT3);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int dp83811_set_wol(struct phy_device *phydev,
+			   struct ethtool_wolinfo *wol)
+{
+	struct net_device *ndev = phydev->attached_dev;
+	const u8 *mac;
+	u16 value;
+
+	if (wol->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE)) {
+		mac = (const u8 *)ndev->dev_addr;
+
+		if (!is_valid_ether_addr(mac))
+			return -EINVAL;
+
+		/* MAC addresses start with byte 5, but stored in mac[0].
+		 * 811 PHYs store bytes 4|5, 2|3, 0|1
+		 */
+		phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_DA1,
+			      (mac[1] << 8) | mac[0]);
+		phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_DA2,
+			      (mac[3] << 8) | mac[2]);
+		phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_DA3,
+			      (mac[5] << 8) | mac[4]);
+
+		value = phy_read_mmd(phydev, DP83811_DEVADDR,
+				     MII_DP83811_WOL_CFG);
+		if (wol->wolopts & WAKE_MAGIC)
+			value |= DP83811_WOL_MAGIC_EN;
+		else
+			value &= ~DP83811_WOL_MAGIC_EN;
+
+		if (wol->wolopts & WAKE_MAGICSECURE) {
+			phy_write_mmd(phydev, DP83811_DEVADDR,
+				      MII_DP83811_RXSOP1,
+				      (wol->sopass[1] << 8) | wol->sopass[0]);
+			phy_write_mmd(phydev, DP83811_DEVADDR,
+				      MII_DP83811_RXSOP2,
+				      (wol->sopass[3] << 8) | wol->sopass[2]);
+			phy_write_mmd(phydev, DP83811_DEVADDR,
+				      MII_DP83811_RXSOP3,
+				      (wol->sopass[5] << 8) | wol->sopass[4]);
+			value |= DP83811_WOL_SECURE_ON;
+		} else {
+			value &= ~DP83811_WOL_SECURE_ON;
+		}
+
+		/* Clear any pending WoL interrupt */
+		phy_read(phydev, MII_DP83811_INT_STAT1);
+
+		value |= DP83811_WOL_EN | DP83811_WOL_INDICATION_SEL |
+			 DP83811_WOL_CLR_INDICATION;
+
+		return phy_write_mmd(phydev, DP83811_DEVADDR,
+				     MII_DP83811_WOL_CFG, value);
+	} else {
+		return phy_clear_bits_mmd(phydev, DP83811_DEVADDR,
+					  MII_DP83811_WOL_CFG, DP83811_WOL_EN);
+	}
+
+}
+
+static void dp83811_get_wol(struct phy_device *phydev,
+			    struct ethtool_wolinfo *wol)
+{
+	u16 sopass_val;
+	int value;
+
+	wol->supported = (WAKE_MAGIC | WAKE_MAGICSECURE);
+	wol->wolopts = 0;
+
+	value = phy_read_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG);
+
+	if (value & DP83811_WOL_MAGIC_EN)
+		wol->wolopts |= WAKE_MAGIC;
+
+	if (value & DP83811_WOL_SECURE_ON) {
+		sopass_val = phy_read_mmd(phydev, DP83811_DEVADDR,
+					  MII_DP83811_RXSOP1);
+		wol->sopass[0] = (sopass_val & 0xff);
+		wol->sopass[1] = (sopass_val >> 8);
+
+		sopass_val = phy_read_mmd(phydev, DP83811_DEVADDR,
+					  MII_DP83811_RXSOP2);
+		wol->sopass[2] = (sopass_val & 0xff);
+		wol->sopass[3] = (sopass_val >> 8);
+
+		sopass_val = phy_read_mmd(phydev, DP83811_DEVADDR,
+					  MII_DP83811_RXSOP3);
+		wol->sopass[4] = (sopass_val & 0xff);
+		wol->sopass[5] = (sopass_val >> 8);
+
+		wol->wolopts |= WAKE_MAGICSECURE;
+	}
+
+	/* WoL is not enabled so set wolopts to 0 */
+	if (!(value & DP83811_WOL_EN))
+		wol->wolopts = 0;
+}
+
+static int dp83811_config_intr(struct phy_device *phydev)
+{
+	int misr_status, err;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		err = dp83811_ack_interrupt(phydev);
+		if (err)
+			return err;
+
+		misr_status = phy_read(phydev, MII_DP83811_INT_STAT1);
+		if (misr_status < 0)
+			return misr_status;
+
+		misr_status |= (DP83811_RX_ERR_HF_INT_EN |
+				DP83811_MS_TRAINING_INT_EN |
+				DP83811_ANEG_COMPLETE_INT_EN |
+				DP83811_ESD_EVENT_INT_EN |
+				DP83811_WOL_INT_EN |
+				DP83811_LINK_STAT_INT_EN |
+				DP83811_ENERGY_DET_INT_EN |
+				DP83811_LINK_QUAL_INT_EN);
+
+		err = phy_write(phydev, MII_DP83811_INT_STAT1, misr_status);
+		if (err < 0)
+			return err;
+
+		misr_status = phy_read(phydev, MII_DP83811_INT_STAT2);
+		if (misr_status < 0)
+			return misr_status;
+
+		misr_status |= (DP83811_JABBER_DET_INT_EN |
+				DP83811_POLARITY_INT_EN |
+				DP83811_SLEEP_MODE_INT_EN |
+				DP83811_OVERTEMP_INT_EN |
+				DP83811_OVERVOLTAGE_INT_EN |
+				DP83811_UNDERVOLTAGE_INT_EN);
+
+		err = phy_write(phydev, MII_DP83811_INT_STAT2, misr_status);
+		if (err < 0)
+			return err;
+
+		misr_status = phy_read(phydev, MII_DP83811_INT_STAT3);
+		if (misr_status < 0)
+			return misr_status;
+
+		misr_status |= (DP83811_LPS_INT_EN |
+				DP83811_NO_FRAME_INT_EN |
+				DP83811_POR_DONE_INT_EN);
+
+		err = phy_write(phydev, MII_DP83811_INT_STAT3, misr_status);
+
+	} else {
+		err = phy_write(phydev, MII_DP83811_INT_STAT1, 0);
+		if (err < 0)
+			return err;
+
+		err = phy_write(phydev, MII_DP83811_INT_STAT2, 0);
+		if (err < 0)
+			return err;
+
+		err = phy_write(phydev, MII_DP83811_INT_STAT3, 0);
+		if (err < 0)
+			return err;
+
+		err = dp83811_ack_interrupt(phydev);
+	}
+
+	return err;
+}
+
+static irqreturn_t dp83811_handle_interrupt(struct phy_device *phydev)
+{
+	bool trigger_machine = false;
+	int irq_status;
+
+	/* The INT_STAT registers 1, 2 and 3 are holding the interrupt status
+	 * in the upper half (15:8), while the lower half (7:0) is used for
+	 * controlling the interrupt enable state of those individual interrupt
+	 * sources. To determine the possible interrupt sources, just read the
+	 * INT_STAT* register and use it directly to know which interrupts have
+	 * been enabled previously or not.
+	 */
+	irq_status = phy_read(phydev, MII_DP83811_INT_STAT1);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+	if (irq_status & ((irq_status & GENMASK(7, 0)) << 8))
+		trigger_machine = true;
+
+	irq_status = phy_read(phydev, MII_DP83811_INT_STAT2);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+	if (irq_status & ((irq_status & GENMASK(7, 0)) << 8))
+		trigger_machine = true;
+
+	irq_status = phy_read(phydev, MII_DP83811_INT_STAT3);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+	if (irq_status & ((irq_status & GENMASK(7, 0)) << 8))
+		trigger_machine = true;
+
+	if (!trigger_machine)
+		return IRQ_NONE;
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
+static int dp83811_config_aneg(struct phy_device *phydev)
+{
+	int value, err;
+
+	if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+		value = phy_read(phydev, MII_DP83811_SGMII_CTRL);
+		if (phydev->autoneg == AUTONEG_ENABLE) {
+			err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
+					(DP83811_SGMII_AUTO_NEG_EN | value));
+			if (err < 0)
+				return err;
+		} else {
+			err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
+					(~DP83811_SGMII_AUTO_NEG_EN & value));
+			if (err < 0)
+				return err;
+		}
+	}
+
+	return genphy_config_aneg(phydev);
+}
+
+static int dp83811_config_init(struct phy_device *phydev)
+{
+	int value, err;
+
+	value = phy_read(phydev, MII_DP83811_SGMII_CTRL);
+	if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+		err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
+					(DP83811_SGMII_EN | value));
+	} else {
+		err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
+				(~DP83811_SGMII_EN & value));
+	}
+
+	if (err < 0)
+
+		return err;
+
+	value = DP83811_WOL_MAGIC_EN | DP83811_WOL_SECURE_ON | DP83811_WOL_EN;
+
+	return phy_clear_bits_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
+				  value);
+}
+
+static int dp83811_phy_reset(struct phy_device *phydev)
+{
+	int err;
+
+	err = phy_write(phydev, MII_DP83811_RESET_CTRL, DP83811_HW_RESET);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int dp83811_suspend(struct phy_device *phydev)
+{
+	int value;
+
+	value = phy_read_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG);
+
+	if (!(value & DP83811_WOL_EN))
+		genphy_suspend(phydev);
+
+	return 0;
+}
+
+static int dp83811_resume(struct phy_device *phydev)
+{
+	genphy_resume(phydev);
+
+	phy_set_bits_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
+			 DP83811_WOL_CLR_INDICATION);
+
+	return 0;
+}
+
+static struct phy_driver dp83811_driver[] = {
+	{
+		.phy_id = DP83TC811_PHY_ID,
+		.phy_id_mask = 0xfffffff0,
+		.name = "TI DP83TC811",
+		/* PHY_BASIC_FEATURES */
+		.config_init = dp83811_config_init,
+		.config_aneg = dp83811_config_aneg,
+		.soft_reset = dp83811_phy_reset,
+		.get_wol = dp83811_get_wol,
+		.set_wol = dp83811_set_wol,
+		.config_intr = dp83811_config_intr,
+		.handle_interrupt = dp83811_handle_interrupt,
+		.suspend = dp83811_suspend,
+		.resume = dp83811_resume,
+	 },
+};
+module_phy_driver(dp83811_driver);
+
+static struct mdio_device_id __maybe_unused dp83811_tbl[] = {
+	{ DP83TC811_PHY_ID, 0xfffffff0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(mdio, dp83811_tbl);
+
+MODULE_DESCRIPTION("Texas Instruments DP83TC811 PHY driver");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com");
+MODULE_LICENSE("GPL");