Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 4224 insertions, 0 deletions

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
new file mode 100644
index 000000000..2c84fccef
--- /dev/null
+++ b/drivers/net/phy/micrel.c
@@ -0,0 +1,4224 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * drivers/net/phy/micrel.c
+ *
+ * Driver for Micrel PHYs
+ *
+ * Author: David J. Choi
+ *
+ * Copyright (c) 2010-2013 Micrel, Inc.
+ * Copyright (c) 2014 Johan Hovold <johan@kernel.org>
+ *
+ * Support : Micrel Phys:
+ *		Giga phys: ksz9021, ksz9031, ksz9131
+ *		100/10 Phys : ksz8001, ksz8721, ksz8737, ksz8041
+ *			   ksz8021, ksz8031, ksz8051,
+ *			   ksz8081, ksz8091,
+ *			   ksz8061,
+ *		Switch : ksz8873, ksz886x
+ *			 ksz9477
+ */
+
+#include <linux/bitfield.h>
+#include <linux/ethtool_netlink.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/micrel_phy.h>
+#include <linux/of.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/ptp_clock_kernel.h>
+#include <linux/ptp_clock.h>
+#include <linux/ptp_classify.h>
+#include <linux/net_tstamp.h>
+#include <linux/gpio/consumer.h>
+
+/* Operation Mode Strap Override */
+#define MII_KSZPHY_OMSO				0x16
+#define KSZPHY_OMSO_FACTORY_TEST		BIT(15)
+#define KSZPHY_OMSO_B_CAST_OFF			BIT(9)
+#define KSZPHY_OMSO_NAND_TREE_ON		BIT(5)
+#define KSZPHY_OMSO_RMII_OVERRIDE		BIT(1)
+#define KSZPHY_OMSO_MII_OVERRIDE		BIT(0)
+
+/* general Interrupt control/status reg in vendor specific block. */
+#define MII_KSZPHY_INTCS			0x1B
+#define KSZPHY_INTCS_JABBER			BIT(15)
+#define KSZPHY_INTCS_RECEIVE_ERR		BIT(14)
+#define KSZPHY_INTCS_PAGE_RECEIVE		BIT(13)
+#define KSZPHY_INTCS_PARELLEL			BIT(12)
+#define KSZPHY_INTCS_LINK_PARTNER_ACK		BIT(11)
+#define KSZPHY_INTCS_LINK_DOWN			BIT(10)
+#define KSZPHY_INTCS_REMOTE_FAULT		BIT(9)
+#define KSZPHY_INTCS_LINK_UP			BIT(8)
+#define KSZPHY_INTCS_ALL			(KSZPHY_INTCS_LINK_UP |\
+						KSZPHY_INTCS_LINK_DOWN)
+#define KSZPHY_INTCS_LINK_DOWN_STATUS		BIT(2)
+#define KSZPHY_INTCS_LINK_UP_STATUS		BIT(0)
+#define KSZPHY_INTCS_STATUS			(KSZPHY_INTCS_LINK_DOWN_STATUS |\
+						 KSZPHY_INTCS_LINK_UP_STATUS)
+
+/* LinkMD Control/Status */
+#define KSZ8081_LMD				0x1d
+#define KSZ8081_LMD_ENABLE_TEST			BIT(15)
+#define KSZ8081_LMD_STAT_NORMAL			0
+#define KSZ8081_LMD_STAT_OPEN			1
+#define KSZ8081_LMD_STAT_SHORT			2
+#define KSZ8081_LMD_STAT_FAIL			3
+#define KSZ8081_LMD_STAT_MASK			GENMASK(14, 13)
+/* Short cable (<10 meter) has been detected by LinkMD */
+#define KSZ8081_LMD_SHORT_INDICATOR		BIT(12)
+#define KSZ8081_LMD_DELTA_TIME_MASK		GENMASK(8, 0)
+
+#define KSZ9x31_LMD				0x12
+#define KSZ9x31_LMD_VCT_EN			BIT(15)
+#define KSZ9x31_LMD_VCT_DIS_TX			BIT(14)
+#define KSZ9x31_LMD_VCT_PAIR(n)			(((n) & 0x3) << 12)
+#define KSZ9x31_LMD_VCT_SEL_RESULT		0
+#define KSZ9x31_LMD_VCT_SEL_THRES_HI		BIT(10)
+#define KSZ9x31_LMD_VCT_SEL_THRES_LO		BIT(11)
+#define KSZ9x31_LMD_VCT_SEL_MASK		GENMASK(11, 10)
+#define KSZ9x31_LMD_VCT_ST_NORMAL		0
+#define KSZ9x31_LMD_VCT_ST_OPEN			1
+#define KSZ9x31_LMD_VCT_ST_SHORT		2
+#define KSZ9x31_LMD_VCT_ST_FAIL			3
+#define KSZ9x31_LMD_VCT_ST_MASK			GENMASK(9, 8)
+#define KSZ9x31_LMD_VCT_DATA_REFLECTED_INVALID	BIT(7)
+#define KSZ9x31_LMD_VCT_DATA_SIG_WAIT_TOO_LONG	BIT(6)
+#define KSZ9x31_LMD_VCT_DATA_MASK100		BIT(5)
+#define KSZ9x31_LMD_VCT_DATA_NLP_FLP		BIT(4)
+#define KSZ9x31_LMD_VCT_DATA_LO_PULSE_MASK	GENMASK(3, 2)
+#define KSZ9x31_LMD_VCT_DATA_HI_PULSE_MASK	GENMASK(1, 0)
+#define KSZ9x31_LMD_VCT_DATA_MASK		GENMASK(7, 0)
+
+#define KSZPHY_WIRE_PAIR_MASK			0x3
+
+#define LAN8814_CABLE_DIAG			0x12
+#define LAN8814_CABLE_DIAG_STAT_MASK		GENMASK(9, 8)
+#define LAN8814_CABLE_DIAG_VCT_DATA_MASK	GENMASK(7, 0)
+#define LAN8814_PAIR_BIT_SHIFT			12
+
+#define LAN8814_WIRE_PAIR_MASK			0xF
+
+/* Lan8814 general Interrupt control/status reg in GPHY specific block. */
+#define LAN8814_INTC				0x18
+#define LAN8814_INTS				0x1B
+
+#define LAN8814_INT_LINK_DOWN			BIT(2)
+#define LAN8814_INT_LINK_UP			BIT(0)
+#define LAN8814_INT_LINK			(LAN8814_INT_LINK_UP |\
+						 LAN8814_INT_LINK_DOWN)
+
+#define LAN8814_INTR_CTRL_REG			0x34
+#define LAN8814_INTR_CTRL_REG_POLARITY		BIT(1)
+#define LAN8814_INTR_CTRL_REG_INTR_ENABLE	BIT(0)
+
+/* Represents 1ppm adjustment in 2^32 format with
+ * each nsec contains 4 clock cycles.
+ * The value is calculated as following: (1/1000000)/((2^-32)/4)
+ */
+#define LAN8814_1PPM_FORMAT			17179
+
+#define PTP_RX_MOD				0x024F
+#define PTP_RX_MOD_BAD_UDPV4_CHKSUM_FORCE_FCS_DIS_ BIT(3)
+#define PTP_RX_TIMESTAMP_EN			0x024D
+#define PTP_TX_TIMESTAMP_EN			0x028D
+
+#define PTP_TIMESTAMP_EN_SYNC_			BIT(0)
+#define PTP_TIMESTAMP_EN_DREQ_			BIT(1)
+#define PTP_TIMESTAMP_EN_PDREQ_			BIT(2)
+#define PTP_TIMESTAMP_EN_PDRES_			BIT(3)
+
+#define PTP_TX_PARSE_L2_ADDR_EN			0x0284
+#define PTP_RX_PARSE_L2_ADDR_EN			0x0244
+
+#define PTP_TX_PARSE_IP_ADDR_EN			0x0285
+#define PTP_RX_PARSE_IP_ADDR_EN			0x0245
+#define LTC_HARD_RESET				0x023F
+#define LTC_HARD_RESET_				BIT(0)
+
+#define TSU_HARD_RESET				0x02C1
+#define TSU_HARD_RESET_				BIT(0)
+
+#define PTP_CMD_CTL				0x0200
+#define PTP_CMD_CTL_PTP_DISABLE_		BIT(0)
+#define PTP_CMD_CTL_PTP_ENABLE_			BIT(1)
+#define PTP_CMD_CTL_PTP_CLOCK_READ_		BIT(3)
+#define PTP_CMD_CTL_PTP_CLOCK_LOAD_		BIT(4)
+#define PTP_CMD_CTL_PTP_LTC_STEP_SEC_		BIT(5)
+#define PTP_CMD_CTL_PTP_LTC_STEP_NSEC_		BIT(6)
+
+#define PTP_CLOCK_SET_SEC_MID			0x0206
+#define PTP_CLOCK_SET_SEC_LO			0x0207
+#define PTP_CLOCK_SET_NS_HI			0x0208
+#define PTP_CLOCK_SET_NS_LO			0x0209
+
+#define PTP_CLOCK_READ_SEC_MID			0x022A
+#define PTP_CLOCK_READ_SEC_LO			0x022B
+#define PTP_CLOCK_READ_NS_HI			0x022C
+#define PTP_CLOCK_READ_NS_LO			0x022D
+
+#define PTP_OPERATING_MODE			0x0241
+#define PTP_OPERATING_MODE_STANDALONE_		BIT(0)
+
+#define PTP_TX_MOD				0x028F
+#define PTP_TX_MOD_TX_PTP_SYNC_TS_INSERT_	BIT(12)
+#define PTP_TX_MOD_BAD_UDPV4_CHKSUM_FORCE_FCS_DIS_ BIT(3)
+
+#define PTP_RX_PARSE_CONFIG			0x0242
+#define PTP_RX_PARSE_CONFIG_LAYER2_EN_		BIT(0)
+#define PTP_RX_PARSE_CONFIG_IPV4_EN_		BIT(1)
+#define PTP_RX_PARSE_CONFIG_IPV6_EN_		BIT(2)
+
+#define PTP_TX_PARSE_CONFIG			0x0282
+#define PTP_TX_PARSE_CONFIG_LAYER2_EN_		BIT(0)
+#define PTP_TX_PARSE_CONFIG_IPV4_EN_		BIT(1)
+#define PTP_TX_PARSE_CONFIG_IPV6_EN_		BIT(2)
+
+#define PTP_CLOCK_RATE_ADJ_HI			0x020C
+#define PTP_CLOCK_RATE_ADJ_LO			0x020D
+#define PTP_CLOCK_RATE_ADJ_DIR_			BIT(15)
+
+#define PTP_LTC_STEP_ADJ_HI			0x0212
+#define PTP_LTC_STEP_ADJ_LO			0x0213
+#define PTP_LTC_STEP_ADJ_DIR_			BIT(15)
+
+#define LAN8814_INTR_STS_REG			0x0033
+#define LAN8814_INTR_STS_REG_1588_TSU0_		BIT(0)
+#define LAN8814_INTR_STS_REG_1588_TSU1_		BIT(1)
+#define LAN8814_INTR_STS_REG_1588_TSU2_		BIT(2)
+#define LAN8814_INTR_STS_REG_1588_TSU3_		BIT(3)
+
+#define PTP_CAP_INFO				0x022A
+#define PTP_CAP_INFO_TX_TS_CNT_GET_(reg_val)	(((reg_val) & 0x0f00) >> 8)
+#define PTP_CAP_INFO_RX_TS_CNT_GET_(reg_val)	((reg_val) & 0x000f)
+
+#define PTP_TX_EGRESS_SEC_HI			0x0296
+#define PTP_TX_EGRESS_SEC_LO			0x0297
+#define PTP_TX_EGRESS_NS_HI			0x0294
+#define PTP_TX_EGRESS_NS_LO			0x0295
+#define PTP_TX_MSG_HEADER2			0x0299
+
+#define PTP_RX_INGRESS_SEC_HI			0x0256
+#define PTP_RX_INGRESS_SEC_LO			0x0257
+#define PTP_RX_INGRESS_NS_HI			0x0254
+#define PTP_RX_INGRESS_NS_LO			0x0255
+#define PTP_RX_MSG_HEADER2			0x0259
+
+#define PTP_TSU_INT_EN				0x0200
+#define PTP_TSU_INT_EN_PTP_TX_TS_OVRFL_EN_	BIT(3)
+#define PTP_TSU_INT_EN_PTP_TX_TS_EN_		BIT(2)
+#define PTP_TSU_INT_EN_PTP_RX_TS_OVRFL_EN_	BIT(1)
+#define PTP_TSU_INT_EN_PTP_RX_TS_EN_		BIT(0)
+
+#define PTP_TSU_INT_STS				0x0201
+#define PTP_TSU_INT_STS_PTP_TX_TS_OVRFL_INT_	BIT(3)
+#define PTP_TSU_INT_STS_PTP_TX_TS_EN_		BIT(2)
+#define PTP_TSU_INT_STS_PTP_RX_TS_OVRFL_INT_	BIT(1)
+#define PTP_TSU_INT_STS_PTP_RX_TS_EN_		BIT(0)
+
+#define LAN8814_LED_CTRL_1			0x0
+#define LAN8814_LED_CTRL_1_KSZ9031_LED_MODE_	BIT(6)
+
+/* PHY Control 1 */
+#define MII_KSZPHY_CTRL_1			0x1e
+#define KSZ8081_CTRL1_MDIX_STAT			BIT(4)
+
+/* PHY Control 2 / PHY Control (if no PHY Control 1) */
+#define MII_KSZPHY_CTRL_2			0x1f
+#define MII_KSZPHY_CTRL				MII_KSZPHY_CTRL_2
+/* bitmap of PHY register to set interrupt mode */
+#define KSZ8081_CTRL2_HP_MDIX			BIT(15)
+#define KSZ8081_CTRL2_MDI_MDI_X_SELECT		BIT(14)
+#define KSZ8081_CTRL2_DISABLE_AUTO_MDIX		BIT(13)
+#define KSZ8081_CTRL2_FORCE_LINK		BIT(11)
+#define KSZ8081_CTRL2_POWER_SAVING		BIT(10)
+#define KSZPHY_CTRL_INT_ACTIVE_HIGH		BIT(9)
+#define KSZPHY_RMII_REF_CLK_SEL			BIT(7)
+
+/* Write/read to/from extended registers */
+#define MII_KSZPHY_EXTREG			0x0b
+#define KSZPHY_EXTREG_WRITE			0x8000
+
+#define MII_KSZPHY_EXTREG_WRITE			0x0c
+#define MII_KSZPHY_EXTREG_READ			0x0d
+
+/* Extended registers */
+#define MII_KSZPHY_CLK_CONTROL_PAD_SKEW		0x104
+#define MII_KSZPHY_RX_DATA_PAD_SKEW		0x105
+#define MII_KSZPHY_TX_DATA_PAD_SKEW		0x106
+
+#define PS_TO_REG				200
+#define FIFO_SIZE				8
+
+struct kszphy_hw_stat {
+	const char *string;
+	u8 reg;
+	u8 bits;
+};
+
+static struct kszphy_hw_stat kszphy_hw_stats[] = {
+	{ "phy_receive_errors", 21, 16},
+	{ "phy_idle_errors", 10, 8 },
+};
+
+struct kszphy_type {
+	u32 led_mode_reg;
+	u16 interrupt_level_mask;
+	u16 cable_diag_reg;
+	unsigned long pair_mask;
+	u16 disable_dll_tx_bit;
+	u16 disable_dll_rx_bit;
+	u16 disable_dll_mask;
+	bool has_broadcast_disable;
+	bool has_nand_tree_disable;
+	bool has_rmii_ref_clk_sel;
+};
+
+/* Shared structure between the PHYs of the same package. */
+struct lan8814_shared_priv {
+	struct phy_device *phydev;
+	struct ptp_clock *ptp_clock;
+	struct ptp_clock_info ptp_clock_info;
+
+	/* Reference counter to how many ports in the package are enabling the
+	 * timestamping
+	 */
+	u8 ref;
+
+	/* Lock for ptp_clock and ref */
+	struct mutex shared_lock;
+};
+
+struct lan8814_ptp_rx_ts {
+	struct list_head list;
+	u32 seconds;
+	u32 nsec;
+	u16 seq_id;
+};
+
+struct kszphy_ptp_priv {
+	struct mii_timestamper mii_ts;
+	struct phy_device *phydev;
+
+	struct sk_buff_head tx_queue;
+	struct sk_buff_head rx_queue;
+
+	struct list_head rx_ts_list;
+	/* Lock for Rx ts fifo */
+	spinlock_t rx_ts_lock;
+
+	int hwts_tx_type;
+	enum hwtstamp_rx_filters rx_filter;
+	int layer;
+	int version;
+
+	struct ptp_clock *ptp_clock;
+	struct ptp_clock_info ptp_clock_info;
+	/* Lock for ptp_clock */
+	struct mutex ptp_lock;
+};
+
+struct kszphy_priv {
+	struct kszphy_ptp_priv ptp_priv;
+	const struct kszphy_type *type;
+	int led_mode;
+	u16 vct_ctrl1000;
+	bool rmii_ref_clk_sel;
+	bool rmii_ref_clk_sel_val;
+	u64 stats[ARRAY_SIZE(kszphy_hw_stats)];
+};
+
+static const struct kszphy_type lan8814_type = {
+	.led_mode_reg		= ~LAN8814_LED_CTRL_1,
+	.cable_diag_reg		= LAN8814_CABLE_DIAG,
+	.pair_mask		= LAN8814_WIRE_PAIR_MASK,
+};
+
+static const struct kszphy_type ksz886x_type = {
+	.cable_diag_reg		= KSZ8081_LMD,
+	.pair_mask		= KSZPHY_WIRE_PAIR_MASK,
+};
+
+static const struct kszphy_type ksz8021_type = {
+	.led_mode_reg		= MII_KSZPHY_CTRL_2,
+	.has_broadcast_disable	= true,
+	.has_nand_tree_disable	= true,
+	.has_rmii_ref_clk_sel	= true,
+};
+
+static const struct kszphy_type ksz8041_type = {
+	.led_mode_reg		= MII_KSZPHY_CTRL_1,
+};
+
+static const struct kszphy_type ksz8051_type = {
+	.led_mode_reg		= MII_KSZPHY_CTRL_2,
+	.has_nand_tree_disable	= true,
+};
+
+static const struct kszphy_type ksz8081_type = {
+	.led_mode_reg		= MII_KSZPHY_CTRL_2,
+	.has_broadcast_disable	= true,
+	.has_nand_tree_disable	= true,
+	.has_rmii_ref_clk_sel	= true,
+};
+
+static const struct kszphy_type ks8737_type = {
+	.interrupt_level_mask	= BIT(14),
+};
+
+static const struct kszphy_type ksz9021_type = {
+	.interrupt_level_mask	= BIT(14),
+};
+
+static const struct kszphy_type ksz9131_type = {
+	.interrupt_level_mask	= BIT(14),
+	.disable_dll_tx_bit	= BIT(12),
+	.disable_dll_rx_bit	= BIT(12),
+	.disable_dll_mask	= BIT_MASK(12),
+};
+
+static const struct kszphy_type lan8841_type = {
+	.disable_dll_tx_bit	= BIT(14),
+	.disable_dll_rx_bit	= BIT(14),
+	.disable_dll_mask	= BIT_MASK(14),
+	.cable_diag_reg		= LAN8814_CABLE_DIAG,
+	.pair_mask		= LAN8814_WIRE_PAIR_MASK,
+};
+
+static int kszphy_extended_write(struct phy_device *phydev,
+				u32 regnum, u16 val)
+{
+	phy_write(phydev, MII_KSZPHY_EXTREG, KSZPHY_EXTREG_WRITE | regnum);
+	return phy_write(phydev, MII_KSZPHY_EXTREG_WRITE, val);
+}
+
+static int kszphy_extended_read(struct phy_device *phydev,
+				u32 regnum)
+{
+	phy_write(phydev, MII_KSZPHY_EXTREG, regnum);
+	return phy_read(phydev, MII_KSZPHY_EXTREG_READ);
+}
+
+static int kszphy_ack_interrupt(struct phy_device *phydev)
+{
+	/* bit[7..0] int status, which is a read and clear register. */
+	int rc;
+
+	rc = phy_read(phydev, MII_KSZPHY_INTCS);
+
+	return (rc < 0) ? rc : 0;
+}
+
+static int kszphy_config_intr(struct phy_device *phydev)
+{
+	const struct kszphy_type *type = phydev->drv->driver_data;
+	int temp, err;
+	u16 mask;
+
+	if (type && type->interrupt_level_mask)
+		mask = type->interrupt_level_mask;
+	else
+		mask = KSZPHY_CTRL_INT_ACTIVE_HIGH;
+
+	/* set the interrupt pin active low */
+	temp = phy_read(phydev, MII_KSZPHY_CTRL);
+	if (temp < 0)
+		return temp;
+	temp &= ~mask;
+	phy_write(phydev, MII_KSZPHY_CTRL, temp);
+
+	/* enable / disable interrupts */
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		err = kszphy_ack_interrupt(phydev);
+		if (err)
+			return err;
+
+		temp = KSZPHY_INTCS_ALL;
+		err = phy_write(phydev, MII_KSZPHY_INTCS, temp);
+	} else {
+		temp = 0;
+		err = phy_write(phydev, MII_KSZPHY_INTCS, temp);
+		if (err)
+			return err;
+
+		err = kszphy_ack_interrupt(phydev);
+	}
+
+	return err;
+}
+
+static irqreturn_t kszphy_handle_interrupt(struct phy_device *phydev)
+{
+	int irq_status;
+
+	irq_status = phy_read(phydev, MII_KSZPHY_INTCS);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	if (!(irq_status & KSZPHY_INTCS_STATUS))
+		return IRQ_NONE;
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
+static int kszphy_rmii_clk_sel(struct phy_device *phydev, bool val)
+{
+	int ctrl;
+
+	ctrl = phy_read(phydev, MII_KSZPHY_CTRL);
+	if (ctrl < 0)
+		return ctrl;
+
+	if (val)
+		ctrl |= KSZPHY_RMII_REF_CLK_SEL;
+	else
+		ctrl &= ~KSZPHY_RMII_REF_CLK_SEL;
+
+	return phy_write(phydev, MII_KSZPHY_CTRL, ctrl);
+}
+
+static int kszphy_setup_led(struct phy_device *phydev, u32 reg, int val)
+{
+	int rc, temp, shift;
+
+	switch (reg) {
+	case MII_KSZPHY_CTRL_1:
+		shift = 14;
+		break;
+	case MII_KSZPHY_CTRL_2:
+		shift = 4;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	temp = phy_read(phydev, reg);
+	if (temp < 0) {
+		rc = temp;
+		goto out;
+	}
+
+	temp &= ~(3 << shift);
+	temp |= val << shift;
+	rc = phy_write(phydev, reg, temp);
+out:
+	if (rc < 0)
+		phydev_err(phydev, "failed to set led mode\n");
+
+	return rc;
+}
+
+/* Disable PHY address 0 as the broadcast address, so that it can be used as a
+ * unique (non-broadcast) address on a shared bus.
+ */
+static int kszphy_broadcast_disable(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_read(phydev, MII_KSZPHY_OMSO);
+	if (ret < 0)
+		goto out;
+
+	ret = phy_write(phydev, MII_KSZPHY_OMSO, ret | KSZPHY_OMSO_B_CAST_OFF);
+out:
+	if (ret)
+		phydev_err(phydev, "failed to disable broadcast address\n");
+
+	return ret;
+}
+
+static int kszphy_nand_tree_disable(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_read(phydev, MII_KSZPHY_OMSO);
+	if (ret < 0)
+		goto out;
+
+	if (!(ret & KSZPHY_OMSO_NAND_TREE_ON))
+		return 0;
+
+	ret = phy_write(phydev, MII_KSZPHY_OMSO,
+			ret & ~KSZPHY_OMSO_NAND_TREE_ON);
+out:
+	if (ret)
+		phydev_err(phydev, "failed to disable NAND tree mode\n");
+
+	return ret;
+}
+
+/* Some config bits need to be set again on resume, handle them here. */
+static int kszphy_config_reset(struct phy_device *phydev)
+{
+	struct kszphy_priv *priv = phydev->priv;
+	int ret;
+
+	if (priv->rmii_ref_clk_sel) {
+		ret = kszphy_rmii_clk_sel(phydev, priv->rmii_ref_clk_sel_val);
+		if (ret) {
+			phydev_err(phydev,
+				   "failed to set rmii reference clock\n");
+			return ret;
+		}
+	}
+
+	if (priv->type && priv->led_mode >= 0)
+		kszphy_setup_led(phydev, priv->type->led_mode_reg, priv->led_mode);
+
+	return 0;
+}
+
+static int kszphy_config_init(struct phy_device *phydev)
+{
+	struct kszphy_priv *priv = phydev->priv;
+	const struct kszphy_type *type;
+
+	if (!priv)
+		return 0;
+
+	type = priv->type;
+
+	if (type && type->has_broadcast_disable)
+		kszphy_broadcast_disable(phydev);
+
+	if (type && type->has_nand_tree_disable)
+		kszphy_nand_tree_disable(phydev);
+
+	return kszphy_config_reset(phydev);
+}
+
+static int ksz8041_fiber_mode(struct phy_device *phydev)
+{
+	struct device_node *of_node = phydev->mdio.dev.of_node;
+
+	return of_property_read_bool(of_node, "micrel,fiber-mode");
+}
+
+static int ksz8041_config_init(struct phy_device *phydev)
+{
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+
+	/* Limit supported and advertised modes in fiber mode */
+	if (ksz8041_fiber_mode(phydev)) {
+		phydev->dev_flags |= MICREL_PHY_FXEN;
+		linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, mask);
+		linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, mask);
+
+		linkmode_and(phydev->supported, phydev->supported, mask);
+		linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
+				 phydev->supported);
+		linkmode_and(phydev->advertising, phydev->advertising, mask);
+		linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
+				 phydev->advertising);
+		phydev->autoneg = AUTONEG_DISABLE;
+	}
+
+	return kszphy_config_init(phydev);
+}
+
+static int ksz8041_config_aneg(struct phy_device *phydev)
+{
+	/* Skip auto-negotiation in fiber mode */
+	if (phydev->dev_flags & MICREL_PHY_FXEN) {
+		phydev->speed = SPEED_100;
+		return 0;
+	}
+
+	return genphy_config_aneg(phydev);
+}
+
+static int ksz8051_ksz8795_match_phy_device(struct phy_device *phydev,
+					    const bool ksz_8051)
+{
+	int ret;
+
+	if ((phydev->phy_id & MICREL_PHY_ID_MASK) != PHY_ID_KSZ8051)
+		return 0;
+
+	ret = phy_read(phydev, MII_BMSR);
+	if (ret < 0)
+		return ret;
+
+	/* KSZ8051 PHY and KSZ8794/KSZ8795/KSZ8765 switch share the same
+	 * exact PHY ID. However, they can be told apart by the extended
+	 * capability registers presence. The KSZ8051 PHY has them while
+	 * the switch does not.
+	 */
+	ret &= BMSR_ERCAP;
+	if (ksz_8051)
+		return ret;
+	else
+		return !ret;
+}
+
+static int ksz8051_match_phy_device(struct phy_device *phydev)
+{
+	return ksz8051_ksz8795_match_phy_device(phydev, true);
+}
+
+static int ksz8081_config_init(struct phy_device *phydev)
+{
+	/* KSZPHY_OMSO_FACTORY_TEST is set at de-assertion of the reset line
+	 * based on the RXER (KSZ8081RNA/RND) or TXC (KSZ8081MNX/RNB) pin. If a
+	 * pull-down is missing, the factory test mode should be cleared by
+	 * manually writing a 0.
+	 */
+	phy_clear_bits(phydev, MII_KSZPHY_OMSO, KSZPHY_OMSO_FACTORY_TEST);
+
+	return kszphy_config_init(phydev);
+}
+
+static int ksz8081_config_mdix(struct phy_device *phydev, u8 ctrl)
+{
+	u16 val;
+
+	switch (ctrl) {
+	case ETH_TP_MDI:
+		val = KSZ8081_CTRL2_DISABLE_AUTO_MDIX;
+		break;
+	case ETH_TP_MDI_X:
+		val = KSZ8081_CTRL2_DISABLE_AUTO_MDIX |
+			KSZ8081_CTRL2_MDI_MDI_X_SELECT;
+		break;
+	case ETH_TP_MDI_AUTO:
+		val = 0;
+		break;
+	default:
+		return 0;
+	}
+
+	return phy_modify(phydev, MII_KSZPHY_CTRL_2,
+			  KSZ8081_CTRL2_HP_MDIX |
+			  KSZ8081_CTRL2_MDI_MDI_X_SELECT |
+			  KSZ8081_CTRL2_DISABLE_AUTO_MDIX,
+			  KSZ8081_CTRL2_HP_MDIX | val);
+}
+
+static int ksz8081_config_aneg(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = genphy_config_aneg(phydev);
+	if (ret)
+		return ret;
+
+	/* The MDI-X configuration is automatically changed by the PHY after
+	 * switching from autoneg off to on. So, take MDI-X configuration under
+	 * own control and set it after autoneg configuration was done.
+	 */
+	return ksz8081_config_mdix(phydev, phydev->mdix_ctrl);
+}
+
+static int ksz8081_mdix_update(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_read(phydev, MII_KSZPHY_CTRL_2);
+	if (ret < 0)
+		return ret;
+
+	if (ret & KSZ8081_CTRL2_DISABLE_AUTO_MDIX) {
+		if (ret & KSZ8081_CTRL2_MDI_MDI_X_SELECT)
+			phydev->mdix_ctrl = ETH_TP_MDI_X;
+		else
+			phydev->mdix_ctrl = ETH_TP_MDI;
+	} else {
+		phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
+	}
+
+	ret = phy_read(phydev, MII_KSZPHY_CTRL_1);
+	if (ret < 0)
+		return ret;
+
+	if (ret & KSZ8081_CTRL1_MDIX_STAT)
+		phydev->mdix = ETH_TP_MDI;
+	else
+		phydev->mdix = ETH_TP_MDI_X;
+
+	return 0;
+}
+
+static int ksz8081_read_status(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = ksz8081_mdix_update(phydev);
+	if (ret < 0)
+		return ret;
+
+	return genphy_read_status(phydev);
+}
+
+static int ksz8061_config_init(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_DEVID1, 0xB61A);
+	if (ret)
+		return ret;
+
+	return kszphy_config_init(phydev);
+}
+
+static int ksz8795_match_phy_device(struct phy_device *phydev)
+{
+	return ksz8051_ksz8795_match_phy_device(phydev, false);
+}
+
+static int ksz9021_load_values_from_of(struct phy_device *phydev,
+				       const struct device_node *of_node,
+				       u16 reg,
+				       const char *field1, const char *field2,
+				       const char *field3, const char *field4)
+{
+	int val1 = -1;
+	int val2 = -2;
+	int val3 = -3;
+	int val4 = -4;
+	int newval;
+	int matches = 0;
+
+	if (!of_property_read_u32(of_node, field1, &val1))
+		matches++;
+
+	if (!of_property_read_u32(of_node, field2, &val2))
+		matches++;
+
+	if (!of_property_read_u32(of_node, field3, &val3))
+		matches++;
+
+	if (!of_property_read_u32(of_node, field4, &val4))
+		matches++;
+
+	if (!matches)
+		return 0;
+
+	if (matches < 4)
+		newval = kszphy_extended_read(phydev, reg);
+	else
+		newval = 0;
+
+	if (val1 != -1)
+		newval = ((newval & 0xfff0) | ((val1 / PS_TO_REG) & 0xf) << 0);
+
+	if (val2 != -2)
+		newval = ((newval & 0xff0f) | ((val2 / PS_TO_REG) & 0xf) << 4);
+
+	if (val3 != -3)
+		newval = ((newval & 0xf0ff) | ((val3 / PS_TO_REG) & 0xf) << 8);
+
+	if (val4 != -4)
+		newval = ((newval & 0x0fff) | ((val4 / PS_TO_REG) & 0xf) << 12);
+
+	return kszphy_extended_write(phydev, reg, newval);
+}
+
+static int ksz9021_config_init(struct phy_device *phydev)
+{
+	const struct device_node *of_node;
+	const struct device *dev_walker;
+
+	/* The Micrel driver has a deprecated option to place phy OF
+	 * properties in the MAC node. Walk up the tree of devices to
+	 * find a device with an OF node.
+	 */
+	dev_walker = &phydev->mdio.dev;
+	do {
+		of_node = dev_walker->of_node;
+		dev_walker = dev_walker->parent;
+
+	} while (!of_node && dev_walker);
+
+	if (of_node) {
+		ksz9021_load_values_from_of(phydev, of_node,
+				    MII_KSZPHY_CLK_CONTROL_PAD_SKEW,
+				    "txen-skew-ps", "txc-skew-ps",
+				    "rxdv-skew-ps", "rxc-skew-ps");
+		ksz9021_load_values_from_of(phydev, of_node,
+				    MII_KSZPHY_RX_DATA_PAD_SKEW,
+				    "rxd0-skew-ps", "rxd1-skew-ps",
+				    "rxd2-skew-ps", "rxd3-skew-ps");
+		ksz9021_load_values_from_of(phydev, of_node,
+				    MII_KSZPHY_TX_DATA_PAD_SKEW,
+				    "txd0-skew-ps", "txd1-skew-ps",
+				    "txd2-skew-ps", "txd3-skew-ps");
+	}
+	return 0;
+}
+
+#define KSZ9031_PS_TO_REG		60
+
+/* Extended registers */
+/* MMD Address 0x0 */
+#define MII_KSZ9031RN_FLP_BURST_TX_LO	3
+#define MII_KSZ9031RN_FLP_BURST_TX_HI	4
+
+/* MMD Address 0x2 */
+#define MII_KSZ9031RN_CONTROL_PAD_SKEW	4
+#define MII_KSZ9031RN_RX_CTL_M		GENMASK(7, 4)
+#define MII_KSZ9031RN_TX_CTL_M		GENMASK(3, 0)
+
+#define MII_KSZ9031RN_RX_DATA_PAD_SKEW	5
+#define MII_KSZ9031RN_RXD3		GENMASK(15, 12)
+#define MII_KSZ9031RN_RXD2		GENMASK(11, 8)
+#define MII_KSZ9031RN_RXD1		GENMASK(7, 4)
+#define MII_KSZ9031RN_RXD0		GENMASK(3, 0)
+
+#define MII_KSZ9031RN_TX_DATA_PAD_SKEW	6
+#define MII_KSZ9031RN_TXD3		GENMASK(15, 12)
+#define MII_KSZ9031RN_TXD2		GENMASK(11, 8)
+#define MII_KSZ9031RN_TXD1		GENMASK(7, 4)
+#define MII_KSZ9031RN_TXD0		GENMASK(3, 0)
+
+#define MII_KSZ9031RN_CLK_PAD_SKEW	8
+#define MII_KSZ9031RN_GTX_CLK		GENMASK(9, 5)
+#define MII_KSZ9031RN_RX_CLK		GENMASK(4, 0)
+
+/* KSZ9031 has internal RGMII_IDRX = 1.2ns and RGMII_IDTX = 0ns. To
+ * provide different RGMII options we need to configure delay offset
+ * for each pad relative to build in delay.
+ */
+/* keep rx as "No delay adjustment" and set rx_clk to +0.60ns to get delays of
+ * 1.80ns
+ */
+#define RX_ID				0x7
+#define RX_CLK_ID			0x19
+
+/* set rx to +0.30ns and rx_clk to -0.90ns to compensate the
+ * internal 1.2ns delay.
+ */
+#define RX_ND				0xc
+#define RX_CLK_ND			0x0
+
+/* set tx to -0.42ns and tx_clk to +0.96ns to get 1.38ns delay */
+#define TX_ID				0x0
+#define TX_CLK_ID			0x1f
+
+/* set tx and tx_clk to "No delay adjustment" to keep 0ns
+ * dealy
+ */
+#define TX_ND				0x7
+#define TX_CLK_ND			0xf
+
+/* MMD Address 0x1C */
+#define MII_KSZ9031RN_EDPD		0x23
+#define MII_KSZ9031RN_EDPD_ENABLE	BIT(0)
+
+static int ksz9031_of_load_skew_values(struct phy_device *phydev,
+				       const struct device_node *of_node,
+				       u16 reg, size_t field_sz,
+				       const char *field[], u8 numfields,
+				       bool *update)
+{
+	int val[4] = {-1, -2, -3, -4};
+	int matches = 0;
+	u16 mask;
+	u16 maxval;
+	u16 newval;
+	int i;
+
+	for (i = 0; i < numfields; i++)
+		if (!of_property_read_u32(of_node, field[i], val + i))
+			matches++;
+
+	if (!matches)
+		return 0;
+
+	*update |= true;
+
+	if (matches < numfields)
+		newval = phy_read_mmd(phydev, 2, reg);
+	else
+		newval = 0;
+
+	maxval = (field_sz == 4) ? 0xf : 0x1f;
+	for (i = 0; i < numfields; i++)
+		if (val[i] != -(i + 1)) {
+			mask = 0xffff;
+			mask ^= maxval << (field_sz * i);
+			newval = (newval & mask) |
+				(((val[i] / KSZ9031_PS_TO_REG) & maxval)
+					<< (field_sz * i));
+		}
+
+	return phy_write_mmd(phydev, 2, reg, newval);
+}
+
+/* Center KSZ9031RNX FLP timing at 16ms. */
+static int ksz9031_center_flp_timing(struct phy_device *phydev)
+{
+	int result;
+
+	result = phy_write_mmd(phydev, 0, MII_KSZ9031RN_FLP_BURST_TX_HI,
+			       0x0006);
+	if (result)
+		return result;
+
+	result = phy_write_mmd(phydev, 0, MII_KSZ9031RN_FLP_BURST_TX_LO,
+			       0x1A80);
+	if (result)
+		return result;
+
+	return genphy_restart_aneg(phydev);
+}
+
+/* Enable energy-detect power-down mode */
+static int ksz9031_enable_edpd(struct phy_device *phydev)
+{
+	int reg;
+
+	reg = phy_read_mmd(phydev, 0x1C, MII_KSZ9031RN_EDPD);
+	if (reg < 0)
+		return reg;
+	return phy_write_mmd(phydev, 0x1C, MII_KSZ9031RN_EDPD,
+			     reg | MII_KSZ9031RN_EDPD_ENABLE);
+}
+
+static int ksz9031_config_rgmii_delay(struct phy_device *phydev)
+{
+	u16 rx, tx, rx_clk, tx_clk;
+	int ret;
+
+	switch (phydev->interface) {
+	case PHY_INTERFACE_MODE_RGMII:
+		tx = TX_ND;
+		tx_clk = TX_CLK_ND;
+		rx = RX_ND;
+		rx_clk = RX_CLK_ND;
+		break;
+	case PHY_INTERFACE_MODE_RGMII_ID:
+		tx = TX_ID;
+		tx_clk = TX_CLK_ID;
+		rx = RX_ID;
+		rx_clk = RX_CLK_ID;
+		break;
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+		tx = TX_ND;
+		tx_clk = TX_CLK_ND;
+		rx = RX_ID;
+		rx_clk = RX_CLK_ID;
+		break;
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		tx = TX_ID;
+		tx_clk = TX_CLK_ID;
+		rx = RX_ND;
+		rx_clk = RX_CLK_ND;
+		break;
+	default:
+		return 0;
+	}
+
+	ret = phy_write_mmd(phydev, 2, MII_KSZ9031RN_CONTROL_PAD_SKEW,
+			    FIELD_PREP(MII_KSZ9031RN_RX_CTL_M, rx) |
+			    FIELD_PREP(MII_KSZ9031RN_TX_CTL_M, tx));
+	if (ret < 0)
+		return ret;
+
+	ret = phy_write_mmd(phydev, 2, MII_KSZ9031RN_RX_DATA_PAD_SKEW,
+			    FIELD_PREP(MII_KSZ9031RN_RXD3, rx) |
+			    FIELD_PREP(MII_KSZ9031RN_RXD2, rx) |
+			    FIELD_PREP(MII_KSZ9031RN_RXD1, rx) |
+			    FIELD_PREP(MII_KSZ9031RN_RXD0, rx));
+	if (ret < 0)
+		return ret;
+
+	ret = phy_write_mmd(phydev, 2, MII_KSZ9031RN_TX_DATA_PAD_SKEW,
+			    FIELD_PREP(MII_KSZ9031RN_TXD3, tx) |
+			    FIELD_PREP(MII_KSZ9031RN_TXD2, tx) |
+			    FIELD_PREP(MII_KSZ9031RN_TXD1, tx) |
+			    FIELD_PREP(MII_KSZ9031RN_TXD0, tx));
+	if (ret < 0)
+		return ret;
+
+	return phy_write_mmd(phydev, 2, MII_KSZ9031RN_CLK_PAD_SKEW,
+			     FIELD_PREP(MII_KSZ9031RN_GTX_CLK, tx_clk) |
+			     FIELD_PREP(MII_KSZ9031RN_RX_CLK, rx_clk));
+}
+
+static int ksz9031_config_init(struct phy_device *phydev)
+{
+	const struct device_node *of_node;
+	static const char *clk_skews[2] = {"rxc-skew-ps", "txc-skew-ps"};
+	static const char *rx_data_skews[4] = {
+		"rxd0-skew-ps", "rxd1-skew-ps",
+		"rxd2-skew-ps", "rxd3-skew-ps"
+	};
+	static const char *tx_data_skews[4] = {
+		"txd0-skew-ps", "txd1-skew-ps",
+		"txd2-skew-ps", "txd3-skew-ps"
+	};
+	static const char *control_skews[2] = {"txen-skew-ps", "rxdv-skew-ps"};
+	const struct device *dev_walker;
+	int result;
+
+	result = ksz9031_enable_edpd(phydev);
+	if (result < 0)
+		return result;
+
+	/* The Micrel driver has a deprecated option to place phy OF
+	 * properties in the MAC node. Walk up the tree of devices to
+	 * find a device with an OF node.
+	 */
+	dev_walker = &phydev->mdio.dev;
+	do {
+		of_node = dev_walker->of_node;
+		dev_walker = dev_walker->parent;
+	} while (!of_node && dev_walker);
+
+	if (of_node) {
+		bool update = false;
+
+		if (phy_interface_is_rgmii(phydev)) {
+			result = ksz9031_config_rgmii_delay(phydev);
+			if (result < 0)
+				return result;
+		}
+
+		ksz9031_of_load_skew_values(phydev, of_node,
+				MII_KSZ9031RN_CLK_PAD_SKEW, 5,
+				clk_skews, 2, &update);
+
+		ksz9031_of_load_skew_values(phydev, of_node,
+				MII_KSZ9031RN_CONTROL_PAD_SKEW, 4,
+				control_skews, 2, &update);
+
+		ksz9031_of_load_skew_values(phydev, of_node,
+				MII_KSZ9031RN_RX_DATA_PAD_SKEW, 4,
+				rx_data_skews, 4, &update);
+
+		ksz9031_of_load_skew_values(phydev, of_node,
+				MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4,
+				tx_data_skews, 4, &update);
+
+		if (update && !phy_interface_is_rgmii(phydev))
+			phydev_warn(phydev,
+				    "*-skew-ps values should be used only with RGMII PHY modes\n");
+
+		/* Silicon Errata Sheet (DS80000691D or DS80000692D):
+		 * When the device links in the 1000BASE-T slave mode only,
+		 * the optional 125MHz reference output clock (CLK125_NDO)
+		 * has wide duty cycle variation.
+		 *
+		 * The optional CLK125_NDO clock does not meet the RGMII
+		 * 45/55 percent (min/max) duty cycle requirement and therefore
+		 * cannot be used directly by the MAC side for clocking
+		 * applications that have setup/hold time requirements on
+		 * rising and falling clock edges.
+		 *
+		 * Workaround:
+		 * Force the phy to be the master to receive a stable clock
+		 * which meets the duty cycle requirement.
+		 */
+		if (of_property_read_bool(of_node, "micrel,force-master")) {
+			result = phy_read(phydev, MII_CTRL1000);
+			if (result < 0)
+				goto err_force_master;
+
+			/* enable master mode, config & prefer master */
+			result |= CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER;
+			result = phy_write(phydev, MII_CTRL1000, result);
+			if (result < 0)
+				goto err_force_master;
+		}
+	}
+
+	return ksz9031_center_flp_timing(phydev);
+
+err_force_master:
+	phydev_err(phydev, "failed to force the phy to master mode\n");
+	return result;
+}
+
+#define KSZ9131_SKEW_5BIT_MAX	2400
+#define KSZ9131_SKEW_4BIT_MAX	800
+#define KSZ9131_OFFSET		700
+#define KSZ9131_STEP		100
+
+static int ksz9131_of_load_skew_values(struct phy_device *phydev,
+				       struct device_node *of_node,
+				       u16 reg, size_t field_sz,
+				       char *field[], u8 numfields)
+{
+	int val[4] = {-(1 + KSZ9131_OFFSET), -(2 + KSZ9131_OFFSET),
+		      -(3 + KSZ9131_OFFSET), -(4 + KSZ9131_OFFSET)};
+	int skewval, skewmax = 0;
+	int matches = 0;
+	u16 maxval;
+	u16 newval;
+	u16 mask;
+	int i;
+
+	/* psec properties in dts should mean x pico seconds */
+	if (field_sz == 5)
+		skewmax = KSZ9131_SKEW_5BIT_MAX;
+	else
+		skewmax = KSZ9131_SKEW_4BIT_MAX;
+
+	for (i = 0; i < numfields; i++)
+		if (!of_property_read_s32(of_node, field[i], &skewval)) {
+			if (skewval < -KSZ9131_OFFSET)
+				skewval = -KSZ9131_OFFSET;
+			else if (skewval > skewmax)
+				skewval = skewmax;
+
+			val[i] = skewval + KSZ9131_OFFSET;
+			matches++;
+		}
+
+	if (!matches)
+		return 0;
+
+	if (matches < numfields)
+		newval = phy_read_mmd(phydev, 2, reg);
+	else
+		newval = 0;
+
+	maxval = (field_sz == 4) ? 0xf : 0x1f;
+	for (i = 0; i < numfields; i++)
+		if (val[i] != -(i + 1 + KSZ9131_OFFSET)) {
+			mask = 0xffff;
+			mask ^= maxval << (field_sz * i);
+			newval = (newval & mask) |
+				(((val[i] / KSZ9131_STEP) & maxval)
+					<< (field_sz * i));
+		}
+
+	return phy_write_mmd(phydev, 2, reg, newval);
+}
+
+#define KSZ9131RN_MMD_COMMON_CTRL_REG	2
+#define KSZ9131RN_RXC_DLL_CTRL		76
+#define KSZ9131RN_TXC_DLL_CTRL		77
+#define KSZ9131RN_DLL_ENABLE_DELAY	0
+
+static int ksz9131_config_rgmii_delay(struct phy_device *phydev)
+{
+	const struct kszphy_type *type = phydev->drv->driver_data;
+	u16 rxcdll_val, txcdll_val;
+	int ret;
+
+	switch (phydev->interface) {
+	case PHY_INTERFACE_MODE_RGMII:
+		rxcdll_val = type->disable_dll_rx_bit;
+		txcdll_val = type->disable_dll_tx_bit;
+		break;
+	case PHY_INTERFACE_MODE_RGMII_ID:
+		rxcdll_val = KSZ9131RN_DLL_ENABLE_DELAY;
+		txcdll_val = KSZ9131RN_DLL_ENABLE_DELAY;
+		break;
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+		rxcdll_val = KSZ9131RN_DLL_ENABLE_DELAY;
+		txcdll_val = type->disable_dll_tx_bit;
+		break;
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		rxcdll_val = type->disable_dll_rx_bit;
+		txcdll_val = KSZ9131RN_DLL_ENABLE_DELAY;
+		break;
+	default:
+		return 0;
+	}
+
+	ret = phy_modify_mmd(phydev, KSZ9131RN_MMD_COMMON_CTRL_REG,
+			     KSZ9131RN_RXC_DLL_CTRL, type->disable_dll_mask,
+			     rxcdll_val);
+	if (ret < 0)
+		return ret;
+
+	return phy_modify_mmd(phydev, KSZ9131RN_MMD_COMMON_CTRL_REG,
+			      KSZ9131RN_TXC_DLL_CTRL, type->disable_dll_mask,
+			      txcdll_val);
+}
+
+/* Silicon Errata DS80000693B
+ *
+ * When LEDs are configured in Individual Mode, LED1 is ON in a no-link
+ * condition. Workaround is to set register 0x1e, bit 9, this way LED1 behaves
+ * according to the datasheet (off if there is no link).
+ */
+static int ksz9131_led_errata(struct phy_device *phydev)
+{
+	int reg;
+
+	reg = phy_read_mmd(phydev, 2, 0);
+	if (reg < 0)
+		return reg;
+
+	if (!(reg & BIT(4)))
+		return 0;
+
+	return phy_set_bits(phydev, 0x1e, BIT(9));
+}
+
+static int ksz9131_config_init(struct phy_device *phydev)
+{
+	struct device_node *of_node;
+	char *clk_skews[2] = {"rxc-skew-psec", "txc-skew-psec"};
+	char *rx_data_skews[4] = {
+		"rxd0-skew-psec", "rxd1-skew-psec",
+		"rxd2-skew-psec", "rxd3-skew-psec"
+	};
+	char *tx_data_skews[4] = {
+		"txd0-skew-psec", "txd1-skew-psec",
+		"txd2-skew-psec", "txd3-skew-psec"
+	};
+	char *control_skews[2] = {"txen-skew-psec", "rxdv-skew-psec"};
+	const struct device *dev_walker;
+	int ret;
+
+	dev_walker = &phydev->mdio.dev;
+	do {
+		of_node = dev_walker->of_node;
+		dev_walker = dev_walker->parent;
+	} while (!of_node && dev_walker);
+
+	if (!of_node)
+		return 0;
+
+	if (phy_interface_is_rgmii(phydev)) {
+		ret = ksz9131_config_rgmii_delay(phydev);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = ksz9131_of_load_skew_values(phydev, of_node,
+					  MII_KSZ9031RN_CLK_PAD_SKEW, 5,
+					  clk_skews, 2);
+	if (ret < 0)
+		return ret;
+
+	ret = ksz9131_of_load_skew_values(phydev, of_node,
+					  MII_KSZ9031RN_CONTROL_PAD_SKEW, 4,
+					  control_skews, 2);
+	if (ret < 0)
+		return ret;
+
+	ret = ksz9131_of_load_skew_values(phydev, of_node,
+					  MII_KSZ9031RN_RX_DATA_PAD_SKEW, 4,
+					  rx_data_skews, 4);
+	if (ret < 0)
+		return ret;
+
+	ret = ksz9131_of_load_skew_values(phydev, of_node,
+					  MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4,
+					  tx_data_skews, 4);
+	if (ret < 0)
+		return ret;
+
+	ret = ksz9131_led_errata(phydev);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+#define MII_KSZ9131_AUTO_MDIX		0x1C
+#define MII_KSZ9131_AUTO_MDI_SET	BIT(7)
+#define MII_KSZ9131_AUTO_MDIX_SWAP_OFF	BIT(6)
+
+static int ksz9131_mdix_update(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_read(phydev, MII_KSZ9131_AUTO_MDIX);
+	if (ret < 0)
+		return ret;
+
+	if (ret & MII_KSZ9131_AUTO_MDIX_SWAP_OFF) {
+		if (ret & MII_KSZ9131_AUTO_MDI_SET)
+			phydev->mdix_ctrl = ETH_TP_MDI;
+		else
+			phydev->mdix_ctrl = ETH_TP_MDI_X;
+	} else {
+		phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
+	}
+
+	if (ret & MII_KSZ9131_AUTO_MDI_SET)
+		phydev->mdix = ETH_TP_MDI;
+	else
+		phydev->mdix = ETH_TP_MDI_X;
+
+	return 0;
+}
+
+static int ksz9131_config_mdix(struct phy_device *phydev, u8 ctrl)
+{
+	u16 val;
+
+	switch (ctrl) {
+	case ETH_TP_MDI:
+		val = MII_KSZ9131_AUTO_MDIX_SWAP_OFF |
+		      MII_KSZ9131_AUTO_MDI_SET;
+		break;
+	case ETH_TP_MDI_X:
+		val = MII_KSZ9131_AUTO_MDIX_SWAP_OFF;
+		break;
+	case ETH_TP_MDI_AUTO:
+		val = 0;
+		break;
+	default:
+		return 0;
+	}
+
+	return phy_modify(phydev, MII_KSZ9131_AUTO_MDIX,
+			  MII_KSZ9131_AUTO_MDIX_SWAP_OFF |
+			  MII_KSZ9131_AUTO_MDI_SET, val);
+}
+
+static int ksz9131_read_status(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = ksz9131_mdix_update(phydev);
+	if (ret < 0)
+		return ret;
+
+	return genphy_read_status(phydev);
+}
+
+static int ksz9131_config_aneg(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = ksz9131_config_mdix(phydev, phydev->mdix_ctrl);
+	if (ret)
+		return ret;
+
+	return genphy_config_aneg(phydev);
+}
+
+static int ksz9477_get_features(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = genphy_read_abilities(phydev);
+	if (ret)
+		return ret;
+
+	/* The "EEE control and capability 1" (Register 3.20) seems to be
+	 * influenced by the "EEE advertisement 1" (Register 7.60). Changes
+	 * on the 7.60 will affect 3.20. So, we need to construct our own list
+	 * of caps.
+	 * KSZ8563R should have 100BaseTX/Full only.
+	 */
+	linkmode_and(phydev->supported_eee, phydev->supported,
+		     PHY_EEE_CAP1_FEATURES);
+
+	return 0;
+}
+
+#define KSZ8873MLL_GLOBAL_CONTROL_4	0x06
+#define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX	BIT(6)
+#define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED	BIT(4)
+static int ksz8873mll_read_status(struct phy_device *phydev)
+{
+	int regval;
+
+	/* dummy read */
+	regval = phy_read(phydev, KSZ8873MLL_GLOBAL_CONTROL_4);
+
+	regval = phy_read(phydev, KSZ8873MLL_GLOBAL_CONTROL_4);
+
+	if (regval & KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX)
+		phydev->duplex = DUPLEX_HALF;
+	else
+		phydev->duplex = DUPLEX_FULL;
+
+	if (regval & KSZ8873MLL_GLOBAL_CONTROL_4_SPEED)
+		phydev->speed = SPEED_10;
+	else
+		phydev->speed = SPEED_100;
+
+	phydev->link = 1;
+	phydev->pause = phydev->asym_pause = 0;
+
+	return 0;
+}
+
+static int ksz9031_get_features(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = genphy_read_abilities(phydev);
+	if (ret < 0)
+		return ret;
+
+	/* Silicon Errata Sheet (DS80000691D or DS80000692D):
+	 * Whenever the device's Asymmetric Pause capability is set to 1,
+	 * link-up may fail after a link-up to link-down transition.
+	 *
+	 * The Errata Sheet is for ksz9031, but ksz9021 has the same issue
+	 *
+	 * Workaround:
+	 * Do not enable the Asymmetric Pause capability bit.
+	 */
+	linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->supported);
+
+	/* We force setting the Pause capability as the core will force the
+	 * Asymmetric Pause capability to 1 otherwise.
+	 */
+	linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->supported);
+
+	return 0;
+}
+
+static int ksz9031_read_status(struct phy_device *phydev)
+{
+	int err;
+	int regval;
+
+	err = genphy_read_status(phydev);
+	if (err)
+		return err;
+
+	/* Make sure the PHY is not broken. Read idle error count,
+	 * and reset the PHY if it is maxed out.
+	 */
+	regval = phy_read(phydev, MII_STAT1000);
+	if ((regval & 0xFF) == 0xFF) {
+		phy_init_hw(phydev);
+		phydev->link = 0;
+		if (phydev->drv->config_intr && phy_interrupt_is_valid(phydev))
+			phydev->drv->config_intr(phydev);
+		return genphy_config_aneg(phydev);
+	}
+
+	return 0;
+}
+
+static int ksz9x31_cable_test_start(struct phy_device *phydev)
+{
+	struct kszphy_priv *priv = phydev->priv;
+	int ret;
+
+	/* KSZ9131RNX, DS00002841B-page 38, 4.14 LinkMD (R) Cable Diagnostic
+	 * Prior to running the cable diagnostics, Auto-negotiation should
+	 * be disabled, full duplex set and the link speed set to 1000Mbps
+	 * via the Basic Control Register.
+	 */
+	ret = phy_modify(phydev, MII_BMCR,
+			 BMCR_SPEED1000 | BMCR_FULLDPLX |
+			 BMCR_ANENABLE | BMCR_SPEED100,
+			 BMCR_SPEED1000 | BMCR_FULLDPLX);
+	if (ret)
+		return ret;
+
+	/* KSZ9131RNX, DS00002841B-page 38, 4.14 LinkMD (R) Cable Diagnostic
+	 * The Master-Slave configuration should be set to Slave by writing
+	 * a value of 0x1000 to the Auto-Negotiation Master Slave Control
+	 * Register.
+	 */
+	ret = phy_read(phydev, MII_CTRL1000);
+	if (ret < 0)
+		return ret;
+
+	/* Cache these bits, they need to be restored once LinkMD finishes. */
+	priv->vct_ctrl1000 = ret & (CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER);
+	ret &= ~(CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER);
+	ret |= CTL1000_ENABLE_MASTER;
+
+	return phy_write(phydev, MII_CTRL1000, ret);
+}
+
+static int ksz9x31_cable_test_result_trans(u16 status)
+{
+	switch (FIELD_GET(KSZ9x31_LMD_VCT_ST_MASK, status)) {
+	case KSZ9x31_LMD_VCT_ST_NORMAL:
+		return ETHTOOL_A_CABLE_RESULT_CODE_OK;
+	case KSZ9x31_LMD_VCT_ST_OPEN:
+		return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
+	case KSZ9x31_LMD_VCT_ST_SHORT:
+		return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
+	case KSZ9x31_LMD_VCT_ST_FAIL:
+		fallthrough;
+	default:
+		return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
+	}
+}
+
+static bool ksz9x31_cable_test_failed(u16 status)
+{
+	int stat = FIELD_GET(KSZ9x31_LMD_VCT_ST_MASK, status);
+
+	return stat == KSZ9x31_LMD_VCT_ST_FAIL;
+}
+
+static bool ksz9x31_cable_test_fault_length_valid(u16 status)
+{
+	switch (FIELD_GET(KSZ9x31_LMD_VCT_ST_MASK, status)) {
+	case KSZ9x31_LMD_VCT_ST_OPEN:
+		fallthrough;
+	case KSZ9x31_LMD_VCT_ST_SHORT:
+		return true;
+	}
+	return false;
+}
+
+static int ksz9x31_cable_test_fault_length(struct phy_device *phydev, u16 stat)
+{
+	int dt = FIELD_GET(KSZ9x31_LMD_VCT_DATA_MASK, stat);
+
+	/* KSZ9131RNX, DS00002841B-page 38, 4.14 LinkMD (R) Cable Diagnostic
+	 *
+	 * distance to fault = (VCT_DATA - 22) * 4 / cable propagation velocity
+	 */
+	if ((phydev->phy_id & MICREL_PHY_ID_MASK) == PHY_ID_KSZ9131)
+		dt = clamp(dt - 22, 0, 255);
+
+	return (dt * 400) / 10;
+}
+
+static int ksz9x31_cable_test_wait_for_completion(struct phy_device *phydev)
+{
+	int val, ret;
+
+	ret = phy_read_poll_timeout(phydev, KSZ9x31_LMD, val,
+				    !(val & KSZ9x31_LMD_VCT_EN),
+				    30000, 100000, true);
+
+	return ret < 0 ? ret : 0;
+}
+
+static int ksz9x31_cable_test_get_pair(int pair)
+{
+	static const int ethtool_pair[] = {
+		ETHTOOL_A_CABLE_PAIR_A,
+		ETHTOOL_A_CABLE_PAIR_B,
+		ETHTOOL_A_CABLE_PAIR_C,
+		ETHTOOL_A_CABLE_PAIR_D,
+	};
+
+	return ethtool_pair[pair];
+}
+
+static int ksz9x31_cable_test_one_pair(struct phy_device *phydev, int pair)
+{
+	int ret, val;
+
+	/* KSZ9131RNX, DS00002841B-page 38, 4.14 LinkMD (R) Cable Diagnostic
+	 * To test each individual cable pair, set the cable pair in the Cable
+	 * Diagnostics Test Pair (VCT_PAIR[1:0]) field of the LinkMD Cable
+	 * Diagnostic Register, along with setting the Cable Diagnostics Test
+	 * Enable (VCT_EN) bit. The Cable Diagnostics Test Enable (VCT_EN) bit
+	 * will self clear when the test is concluded.
+	 */
+	ret = phy_write(phydev, KSZ9x31_LMD,
+			KSZ9x31_LMD_VCT_EN | KSZ9x31_LMD_VCT_PAIR(pair));
+	if (ret)
+		return ret;
+
+	ret = ksz9x31_cable_test_wait_for_completion(phydev);
+	if (ret)
+		return ret;
+
+	val = phy_read(phydev, KSZ9x31_LMD);
+	if (val < 0)
+		return val;
+
+	if (ksz9x31_cable_test_failed(val))
+		return -EAGAIN;
+
+	ret = ethnl_cable_test_result(phydev,
+				      ksz9x31_cable_test_get_pair(pair),
+				      ksz9x31_cable_test_result_trans(val));
+	if (ret)
+		return ret;
+
+	if (!ksz9x31_cable_test_fault_length_valid(val))
+		return 0;
+
+	return ethnl_cable_test_fault_length(phydev,
+					     ksz9x31_cable_test_get_pair(pair),
+					     ksz9x31_cable_test_fault_length(phydev, val));
+}
+
+static int ksz9x31_cable_test_get_status(struct phy_device *phydev,
+					 bool *finished)
+{
+	struct kszphy_priv *priv = phydev->priv;
+	unsigned long pair_mask = 0xf;
+	int retries = 20;
+	int pair, ret, rv;
+
+	*finished = false;
+
+	/* Try harder if link partner is active */
+	while (pair_mask && retries--) {
+		for_each_set_bit(pair, &pair_mask, 4) {
+			ret = ksz9x31_cable_test_one_pair(phydev, pair);
+			if (ret == -EAGAIN)
+				continue;
+			if (ret < 0)
+				return ret;
+			clear_bit(pair, &pair_mask);
+		}
+		/* If link partner is in autonegotiation mode it will send 2ms
+		 * of FLPs with at least 6ms of silence.
+		 * Add 2ms sleep to have better chances to hit this silence.
+		 */
+		if (pair_mask)
+			usleep_range(2000, 3000);
+	}
+
+	/* Report remaining unfinished pair result as unknown. */
+	for_each_set_bit(pair, &pair_mask, 4) {
+		ret = ethnl_cable_test_result(phydev,
+					      ksz9x31_cable_test_get_pair(pair),
+					      ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC);
+	}
+
+	*finished = true;
+
+	/* Restore cached bits from before LinkMD got started. */
+	rv = phy_modify(phydev, MII_CTRL1000,
+			CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER,
+			priv->vct_ctrl1000);
+	if (rv)
+		return rv;
+
+	return ret;
+}
+
+static int ksz8873mll_config_aneg(struct phy_device *phydev)
+{
+	return 0;
+}
+
+static int ksz886x_config_mdix(struct phy_device *phydev, u8 ctrl)
+{
+	u16 val;
+
+	switch (ctrl) {
+	case ETH_TP_MDI:
+		val = KSZ886X_BMCR_DISABLE_AUTO_MDIX;
+		break;
+	case ETH_TP_MDI_X:
+		/* Note: The naming of the bit KSZ886X_BMCR_FORCE_MDI is bit
+		 * counter intuitive, the "-X" in "1 = Force MDI" in the data
+		 * sheet seems to be missing:
+		 * 1 = Force MDI (sic!) (transmit on RX+/RX- pins)
+		 * 0 = Normal operation (transmit on TX+/TX- pins)
+		 */
+		val = KSZ886X_BMCR_DISABLE_AUTO_MDIX | KSZ886X_BMCR_FORCE_MDI;
+		break;
+	case ETH_TP_MDI_AUTO:
+		val = 0;
+		break;
+	default:
+		return 0;
+	}
+
+	return phy_modify(phydev, MII_BMCR,
+			  KSZ886X_BMCR_HP_MDIX | KSZ886X_BMCR_FORCE_MDI |
+			  KSZ886X_BMCR_DISABLE_AUTO_MDIX,
+			  KSZ886X_BMCR_HP_MDIX | val);
+}
+
+static int ksz886x_config_aneg(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = genphy_config_aneg(phydev);
+	if (ret)
+		return ret;
+
+	/* The MDI-X configuration is automatically changed by the PHY after
+	 * switching from autoneg off to on. So, take MDI-X configuration under
+	 * own control and set it after autoneg configuration was done.
+	 */
+	return ksz886x_config_mdix(phydev, phydev->mdix_ctrl);
+}
+
+static int ksz886x_mdix_update(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_read(phydev, MII_BMCR);
+	if (ret < 0)
+		return ret;
+
+	if (ret & KSZ886X_BMCR_DISABLE_AUTO_MDIX) {
+		if (ret & KSZ886X_BMCR_FORCE_MDI)
+			phydev->mdix_ctrl = ETH_TP_MDI_X;
+		else
+			phydev->mdix_ctrl = ETH_TP_MDI;
+	} else {
+		phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
+	}
+
+	ret = phy_read(phydev, MII_KSZPHY_CTRL);
+	if (ret < 0)
+		return ret;
+
+	/* Same reverse logic as KSZ886X_BMCR_FORCE_MDI */
+	if (ret & KSZ886X_CTRL_MDIX_STAT)
+		phydev->mdix = ETH_TP_MDI_X;
+	else
+		phydev->mdix = ETH_TP_MDI;
+
+	return 0;
+}
+
+static int ksz886x_read_status(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = ksz886x_mdix_update(phydev);
+	if (ret < 0)
+		return ret;
+
+	return genphy_read_status(phydev);
+}
+
+static int kszphy_get_sset_count(struct phy_device *phydev)
+{
+	return ARRAY_SIZE(kszphy_hw_stats);
+}
+
+static void kszphy_get_strings(struct phy_device *phydev, u8 *data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(kszphy_hw_stats); i++) {
+		strscpy(data + i * ETH_GSTRING_LEN,
+			kszphy_hw_stats[i].string, ETH_GSTRING_LEN);
+	}
+}
+
+static u64 kszphy_get_stat(struct phy_device *phydev, int i)
+{
+	struct kszphy_hw_stat stat = kszphy_hw_stats[i];
+	struct kszphy_priv *priv = phydev->priv;
+	int val;
+	u64 ret;
+
+	val = phy_read(phydev, stat.reg);
+	if (val < 0) {
+		ret = U64_MAX;
+	} else {
+		val = val & ((1 << stat.bits) - 1);
+		priv->stats[i] += val;
+		ret = priv->stats[i];
+	}
+
+	return ret;
+}
+
+static void kszphy_get_stats(struct phy_device *phydev,
+			     struct ethtool_stats *stats, u64 *data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(kszphy_hw_stats); i++)
+		data[i] = kszphy_get_stat(phydev, i);
+}
+
+static int kszphy_suspend(struct phy_device *phydev)
+{
+	/* Disable PHY Interrupts */
+	if (phy_interrupt_is_valid(phydev)) {
+		phydev->interrupts = PHY_INTERRUPT_DISABLED;
+		if (phydev->drv->config_intr)
+			phydev->drv->config_intr(phydev);
+	}
+
+	return genphy_suspend(phydev);
+}
+
+static void kszphy_parse_led_mode(struct phy_device *phydev)
+{
+	const struct kszphy_type *type = phydev->drv->driver_data;
+	const struct device_node *np = phydev->mdio.dev.of_node;
+	struct kszphy_priv *priv = phydev->priv;
+	int ret;
+
+	if (type && type->led_mode_reg) {
+		ret = of_property_read_u32(np, "micrel,led-mode",
+					   &priv->led_mode);
+
+		if (ret)
+			priv->led_mode = -1;
+
+		if (priv->led_mode > 3) {
+			phydev_err(phydev, "invalid led mode: 0x%02x\n",
+				   priv->led_mode);
+			priv->led_mode = -1;
+		}
+	} else {
+		priv->led_mode = -1;
+	}
+}
+
+static int kszphy_resume(struct phy_device *phydev)
+{
+	int ret;
+
+	genphy_resume(phydev);
+
+	/* After switching from power-down to normal mode, an internal global
+	 * reset is automatically generated. Wait a minimum of 1 ms before
+	 * read/write access to the PHY registers.
+	 */
+	usleep_range(1000, 2000);
+
+	ret = kszphy_config_reset(phydev);
+	if (ret)
+		return ret;
+
+	/* Enable PHY Interrupts */
+	if (phy_interrupt_is_valid(phydev)) {
+		phydev->interrupts = PHY_INTERRUPT_ENABLED;
+		if (phydev->drv->config_intr)
+			phydev->drv->config_intr(phydev);
+	}
+
+	return 0;
+}
+
+static int kszphy_probe(struct phy_device *phydev)
+{
+	const struct kszphy_type *type = phydev->drv->driver_data;
+	const struct device_node *np = phydev->mdio.dev.of_node;
+	struct kszphy_priv *priv;
+	struct clk *clk;
+
+	priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	phydev->priv = priv;
+
+	priv->type = type;
+
+	kszphy_parse_led_mode(phydev);
+
+	clk = devm_clk_get(&phydev->mdio.dev, "rmii-ref");
+	/* NOTE: clk may be NULL if building without CONFIG_HAVE_CLK */
+	if (!IS_ERR_OR_NULL(clk)) {
+		unsigned long rate = clk_get_rate(clk);
+		bool rmii_ref_clk_sel_25_mhz;
+
+		if (type)
+			priv->rmii_ref_clk_sel = type->has_rmii_ref_clk_sel;
+		rmii_ref_clk_sel_25_mhz = of_property_read_bool(np,
+				"micrel,rmii-reference-clock-select-25-mhz");
+
+		if (rate > 24500000 && rate < 25500000) {
+			priv->rmii_ref_clk_sel_val = rmii_ref_clk_sel_25_mhz;
+		} else if (rate > 49500000 && rate < 50500000) {
+			priv->rmii_ref_clk_sel_val = !rmii_ref_clk_sel_25_mhz;
+		} else {
+			phydev_err(phydev, "Clock rate out of range: %ld\n",
+				   rate);
+			return -EINVAL;
+		}
+	}
+
+	if (ksz8041_fiber_mode(phydev))
+		phydev->port = PORT_FIBRE;
+
+	/* Support legacy board-file configuration */
+	if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) {
+		priv->rmii_ref_clk_sel = true;
+		priv->rmii_ref_clk_sel_val = true;
+	}
+
+	return 0;
+}
+
+static int lan8814_cable_test_start(struct phy_device *phydev)
+{
+	/* If autoneg is enabled, we won't be able to test cross pair
+	 * short. In this case, the PHY will "detect" a link and
+	 * confuse the internal state machine - disable auto neg here.
+	 * Set the speed to 1000mbit and full duplex.
+	 */
+	return phy_modify(phydev, MII_BMCR, BMCR_ANENABLE | BMCR_SPEED100,
+			  BMCR_SPEED1000 | BMCR_FULLDPLX);
+}
+
+static int ksz886x_cable_test_start(struct phy_device *phydev)
+{
+	if (phydev->dev_flags & MICREL_KSZ8_P1_ERRATA)
+		return -EOPNOTSUPP;
+
+	/* If autoneg is enabled, we won't be able to test cross pair
+	 * short. In this case, the PHY will "detect" a link and
+	 * confuse the internal state machine - disable auto neg here.
+	 * If autoneg is disabled, we should set the speed to 10mbit.
+	 */
+	return phy_clear_bits(phydev, MII_BMCR, BMCR_ANENABLE | BMCR_SPEED100);
+}
+
+static __always_inline int ksz886x_cable_test_result_trans(u16 status, u16 mask)
+{
+	switch (FIELD_GET(mask, status)) {
+	case KSZ8081_LMD_STAT_NORMAL:
+		return ETHTOOL_A_CABLE_RESULT_CODE_OK;
+	case KSZ8081_LMD_STAT_SHORT:
+		return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
+	case KSZ8081_LMD_STAT_OPEN:
+		return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
+	case KSZ8081_LMD_STAT_FAIL:
+		fallthrough;
+	default:
+		return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
+	}
+}
+
+static __always_inline bool ksz886x_cable_test_failed(u16 status, u16 mask)
+{
+	return FIELD_GET(mask, status) ==
+		KSZ8081_LMD_STAT_FAIL;
+}
+
+static __always_inline bool ksz886x_cable_test_fault_length_valid(u16 status, u16 mask)
+{
+	switch (FIELD_GET(mask, status)) {
+	case KSZ8081_LMD_STAT_OPEN:
+		fallthrough;
+	case KSZ8081_LMD_STAT_SHORT:
+		return true;
+	}
+	return false;
+}
+
+static __always_inline int ksz886x_cable_test_fault_length(struct phy_device *phydev,
+							   u16 status, u16 data_mask)
+{
+	int dt;
+
+	/* According to the data sheet the distance to the fault is
+	 * DELTA_TIME * 0.4 meters for ksz phys.
+	 * (DELTA_TIME - 22) * 0.8 for lan8814 phy.
+	 */
+	dt = FIELD_GET(data_mask, status);
+
+	if ((phydev->phy_id & MICREL_PHY_ID_MASK) == PHY_ID_LAN8814)
+		return ((dt - 22) * 800) / 10;
+	else
+		return (dt * 400) / 10;
+}
+
+static int ksz886x_cable_test_wait_for_completion(struct phy_device *phydev)
+{
+	const struct kszphy_type *type = phydev->drv->driver_data;
+	int val, ret;
+
+	ret = phy_read_poll_timeout(phydev, type->cable_diag_reg, val,
+				    !(val & KSZ8081_LMD_ENABLE_TEST),
+				    30000, 100000, true);
+
+	return ret < 0 ? ret : 0;
+}
+
+static int lan8814_cable_test_one_pair(struct phy_device *phydev, int pair)
+{
+	static const int ethtool_pair[] = { ETHTOOL_A_CABLE_PAIR_A,
+					    ETHTOOL_A_CABLE_PAIR_B,
+					    ETHTOOL_A_CABLE_PAIR_C,
+					    ETHTOOL_A_CABLE_PAIR_D,
+					  };
+	u32 fault_length;
+	int ret;
+	int val;
+
+	val = KSZ8081_LMD_ENABLE_TEST;
+	val = val | (pair << LAN8814_PAIR_BIT_SHIFT);
+
+	ret = phy_write(phydev, LAN8814_CABLE_DIAG, val);
+	if (ret < 0)
+		return ret;
+
+	ret = ksz886x_cable_test_wait_for_completion(phydev);
+	if (ret)
+		return ret;
+
+	val = phy_read(phydev, LAN8814_CABLE_DIAG);
+	if (val < 0)
+		return val;
+
+	if (ksz886x_cable_test_failed(val, LAN8814_CABLE_DIAG_STAT_MASK))
+		return -EAGAIN;
+
+	ret = ethnl_cable_test_result(phydev, ethtool_pair[pair],
+				      ksz886x_cable_test_result_trans(val,
+								      LAN8814_CABLE_DIAG_STAT_MASK
+								      ));
+	if (ret)
+		return ret;
+
+	if (!ksz886x_cable_test_fault_length_valid(val, LAN8814_CABLE_DIAG_STAT_MASK))
+		return 0;
+
+	fault_length = ksz886x_cable_test_fault_length(phydev, val,
+						       LAN8814_CABLE_DIAG_VCT_DATA_MASK);
+
+	return ethnl_cable_test_fault_length(phydev, ethtool_pair[pair], fault_length);
+}
+
+static int ksz886x_cable_test_one_pair(struct phy_device *phydev, int pair)
+{
+	static const int ethtool_pair[] = {
+		ETHTOOL_A_CABLE_PAIR_A,
+		ETHTOOL_A_CABLE_PAIR_B,
+	};
+	int ret, val, mdix;
+	u32 fault_length;
+
+	/* There is no way to choice the pair, like we do one ksz9031.
+	 * We can workaround this limitation by using the MDI-X functionality.
+	 */
+	if (pair == 0)
+		mdix = ETH_TP_MDI;
+	else
+		mdix = ETH_TP_MDI_X;
+
+	switch (phydev->phy_id & MICREL_PHY_ID_MASK) {
+	case PHY_ID_KSZ8081:
+		ret = ksz8081_config_mdix(phydev, mdix);
+		break;
+	case PHY_ID_KSZ886X:
+		ret = ksz886x_config_mdix(phydev, mdix);
+		break;
+	default:
+		ret = -ENODEV;
+	}
+
+	if (ret)
+		return ret;
+
+	/* Now we are ready to fire. This command will send a 100ns pulse
+	 * to the pair.
+	 */
+	ret = phy_write(phydev, KSZ8081_LMD, KSZ8081_LMD_ENABLE_TEST);
+	if (ret)
+		return ret;
+
+	ret = ksz886x_cable_test_wait_for_completion(phydev);
+	if (ret)
+		return ret;
+
+	val = phy_read(phydev, KSZ8081_LMD);
+	if (val < 0)
+		return val;
+
+	if (ksz886x_cable_test_failed(val, KSZ8081_LMD_STAT_MASK))
+		return -EAGAIN;
+
+	ret = ethnl_cable_test_result(phydev, ethtool_pair[pair],
+				      ksz886x_cable_test_result_trans(val, KSZ8081_LMD_STAT_MASK));
+	if (ret)
+		return ret;
+
+	if (!ksz886x_cable_test_fault_length_valid(val, KSZ8081_LMD_STAT_MASK))
+		return 0;
+
+	fault_length = ksz886x_cable_test_fault_length(phydev, val, KSZ8081_LMD_DELTA_TIME_MASK);
+
+	return ethnl_cable_test_fault_length(phydev, ethtool_pair[pair], fault_length);
+}
+
+static int ksz886x_cable_test_get_status(struct phy_device *phydev,
+					 bool *finished)
+{
+	const struct kszphy_type *type = phydev->drv->driver_data;
+	unsigned long pair_mask = type->pair_mask;
+	int retries = 20;
+	int ret = 0;
+	int pair;
+
+	*finished = false;
+
+	/* Try harder if link partner is active */
+	while (pair_mask && retries--) {
+		for_each_set_bit(pair, &pair_mask, 4) {
+			if (type->cable_diag_reg == LAN8814_CABLE_DIAG)
+				ret = lan8814_cable_test_one_pair(phydev, pair);
+			else
+				ret = ksz886x_cable_test_one_pair(phydev, pair);
+			if (ret == -EAGAIN)
+				continue;
+			if (ret < 0)
+				return ret;
+			clear_bit(pair, &pair_mask);
+		}
+		/* If link partner is in autonegotiation mode it will send 2ms
+		 * of FLPs with at least 6ms of silence.
+		 * Add 2ms sleep to have better chances to hit this silence.
+		 */
+		if (pair_mask)
+			msleep(2);
+	}
+
+	*finished = true;
+
+	return ret;
+}
+
+#define LAN_EXT_PAGE_ACCESS_CONTROL			0x16
+#define LAN_EXT_PAGE_ACCESS_ADDRESS_DATA		0x17
+#define LAN_EXT_PAGE_ACCESS_CTRL_EP_FUNC		0x4000
+
+#define LAN8814_QSGMII_SOFT_RESET			0x43
+#define LAN8814_QSGMII_SOFT_RESET_BIT			BIT(0)
+#define LAN8814_QSGMII_PCS1G_ANEG_CONFIG		0x13
+#define LAN8814_QSGMII_PCS1G_ANEG_CONFIG_ANEG_ENA	BIT(3)
+#define LAN8814_ALIGN_SWAP				0x4a
+#define LAN8814_ALIGN_TX_A_B_SWAP			0x1
+#define LAN8814_ALIGN_TX_A_B_SWAP_MASK			GENMASK(2, 0)
+
+#define LAN8804_ALIGN_SWAP				0x4a
+#define LAN8804_ALIGN_TX_A_B_SWAP			0x1
+#define LAN8804_ALIGN_TX_A_B_SWAP_MASK			GENMASK(2, 0)
+#define LAN8814_CLOCK_MANAGEMENT			0xd
+#define LAN8814_LINK_QUALITY				0x8e
+
+static int lanphy_read_page_reg(struct phy_device *phydev, int page, u32 addr)
+{
+	int data;
+
+	phy_lock_mdio_bus(phydev);
+	__phy_write(phydev, LAN_EXT_PAGE_ACCESS_CONTROL, page);
+	__phy_write(phydev, LAN_EXT_PAGE_ACCESS_ADDRESS_DATA, addr);
+	__phy_write(phydev, LAN_EXT_PAGE_ACCESS_CONTROL,
+		    (page | LAN_EXT_PAGE_ACCESS_CTRL_EP_FUNC));
+	data = __phy_read(phydev, LAN_EXT_PAGE_ACCESS_ADDRESS_DATA);
+	phy_unlock_mdio_bus(phydev);
+
+	return data;
+}
+
+static int lanphy_write_page_reg(struct phy_device *phydev, int page, u16 addr,
+				 u16 val)
+{
+	phy_lock_mdio_bus(phydev);
+	__phy_write(phydev, LAN_EXT_PAGE_ACCESS_CONTROL, page);
+	__phy_write(phydev, LAN_EXT_PAGE_ACCESS_ADDRESS_DATA, addr);
+	__phy_write(phydev, LAN_EXT_PAGE_ACCESS_CONTROL,
+		    page | LAN_EXT_PAGE_ACCESS_CTRL_EP_FUNC);
+
+	val = __phy_write(phydev, LAN_EXT_PAGE_ACCESS_ADDRESS_DATA, val);
+	if (val != 0)
+		phydev_err(phydev, "Error: phy_write has returned error %d\n",
+			   val);
+	phy_unlock_mdio_bus(phydev);
+	return val;
+}
+
+static int lan8814_config_ts_intr(struct phy_device *phydev, bool enable)
+{
+	u16 val = 0;
+
+	if (enable)
+		val = PTP_TSU_INT_EN_PTP_TX_TS_EN_ |
+		      PTP_TSU_INT_EN_PTP_TX_TS_OVRFL_EN_ |
+		      PTP_TSU_INT_EN_PTP_RX_TS_EN_ |
+		      PTP_TSU_INT_EN_PTP_RX_TS_OVRFL_EN_;
+
+	return lanphy_write_page_reg(phydev, 5, PTP_TSU_INT_EN, val);
+}
+
+static void lan8814_ptp_rx_ts_get(struct phy_device *phydev,
+				  u32 *seconds, u32 *nano_seconds, u16 *seq_id)
+{
+	*seconds = lanphy_read_page_reg(phydev, 5, PTP_RX_INGRESS_SEC_HI);
+	*seconds = (*seconds << 16) |
+		   lanphy_read_page_reg(phydev, 5, PTP_RX_INGRESS_SEC_LO);
+
+	*nano_seconds = lanphy_read_page_reg(phydev, 5, PTP_RX_INGRESS_NS_HI);
+	*nano_seconds = ((*nano_seconds & 0x3fff) << 16) |
+			lanphy_read_page_reg(phydev, 5, PTP_RX_INGRESS_NS_LO);
+
+	*seq_id = lanphy_read_page_reg(phydev, 5, PTP_RX_MSG_HEADER2);
+}
+
+static void lan8814_ptp_tx_ts_get(struct phy_device *phydev,
+				  u32 *seconds, u32 *nano_seconds, u16 *seq_id)
+{
+	*seconds = lanphy_read_page_reg(phydev, 5, PTP_TX_EGRESS_SEC_HI);
+	*seconds = *seconds << 16 |
+		   lanphy_read_page_reg(phydev, 5, PTP_TX_EGRESS_SEC_LO);
+
+	*nano_seconds = lanphy_read_page_reg(phydev, 5, PTP_TX_EGRESS_NS_HI);
+	*nano_seconds = ((*nano_seconds & 0x3fff) << 16) |
+			lanphy_read_page_reg(phydev, 5, PTP_TX_EGRESS_NS_LO);
+
+	*seq_id = lanphy_read_page_reg(phydev, 5, PTP_TX_MSG_HEADER2);
+}
+
+static int lan8814_ts_info(struct mii_timestamper *mii_ts, struct ethtool_ts_info *info)
+{
+	struct kszphy_ptp_priv *ptp_priv = container_of(mii_ts, struct kszphy_ptp_priv, mii_ts);
+	struct phy_device *phydev = ptp_priv->phydev;
+	struct lan8814_shared_priv *shared = phydev->shared->priv;
+
+	info->so_timestamping = SOF_TIMESTAMPING_TX_HARDWARE |
+				SOF_TIMESTAMPING_RX_HARDWARE |
+				SOF_TIMESTAMPING_RAW_HARDWARE;
+
+	info->phc_index = ptp_clock_index(shared->ptp_clock);
+
+	info->tx_types =
+		(1 << HWTSTAMP_TX_OFF) |
+		(1 << HWTSTAMP_TX_ON) |
+		(1 << HWTSTAMP_TX_ONESTEP_SYNC);
+
+	info->rx_filters =
+		(1 << HWTSTAMP_FILTER_NONE) |
+		(1 << HWTSTAMP_FILTER_PTP_V1_L4_EVENT) |
+		(1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT) |
+		(1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT) |
+		(1 << HWTSTAMP_FILTER_PTP_V2_EVENT);
+
+	return 0;
+}
+
+static void lan8814_flush_fifo(struct phy_device *phydev, bool egress)
+{
+	int i;
+
+	for (i = 0; i < FIFO_SIZE; ++i)
+		lanphy_read_page_reg(phydev, 5,
+				     egress ? PTP_TX_MSG_HEADER2 : PTP_RX_MSG_HEADER2);
+
+	/* Read to clear overflow status bit */
+	lanphy_read_page_reg(phydev, 5, PTP_TSU_INT_STS);
+}
+
+static int lan8814_hwtstamp(struct mii_timestamper *mii_ts, struct ifreq *ifr)
+{
+	struct kszphy_ptp_priv *ptp_priv =
+			  container_of(mii_ts, struct kszphy_ptp_priv, mii_ts);
+	struct phy_device *phydev = ptp_priv->phydev;
+	struct lan8814_shared_priv *shared = phydev->shared->priv;
+	struct lan8814_ptp_rx_ts *rx_ts, *tmp;
+	struct hwtstamp_config config;
+	int txcfg = 0, rxcfg = 0;
+	int pkt_ts_enable;
+
+	if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
+		return -EFAULT;
+
+	ptp_priv->hwts_tx_type = config.tx_type;
+	ptp_priv->rx_filter = config.rx_filter;
+
+	switch (config.rx_filter) {
+	case HWTSTAMP_FILTER_NONE:
+		ptp_priv->layer = 0;
+		ptp_priv->version = 0;
+		break;
+	case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
+	case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
+		ptp_priv->layer = PTP_CLASS_L4;
+		ptp_priv->version = PTP_CLASS_V2;
+		break;
+	case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
+	case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
+		ptp_priv->layer = PTP_CLASS_L2;
+		ptp_priv->version = PTP_CLASS_V2;
+		break;
+	case HWTSTAMP_FILTER_PTP_V2_EVENT:
+	case HWTSTAMP_FILTER_PTP_V2_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+		ptp_priv->layer = PTP_CLASS_L4 | PTP_CLASS_L2;
+		ptp_priv->version = PTP_CLASS_V2;
+		break;
+	default:
+		return -ERANGE;
+	}
+
+	if (ptp_priv->layer & PTP_CLASS_L2) {
+		rxcfg = PTP_RX_PARSE_CONFIG_LAYER2_EN_;
+		txcfg = PTP_TX_PARSE_CONFIG_LAYER2_EN_;
+	} else if (ptp_priv->layer & PTP_CLASS_L4) {
+		rxcfg |= PTP_RX_PARSE_CONFIG_IPV4_EN_ | PTP_RX_PARSE_CONFIG_IPV6_EN_;
+		txcfg |= PTP_TX_PARSE_CONFIG_IPV4_EN_ | PTP_TX_PARSE_CONFIG_IPV6_EN_;
+	}
+	lanphy_write_page_reg(ptp_priv->phydev, 5, PTP_RX_PARSE_CONFIG, rxcfg);
+	lanphy_write_page_reg(ptp_priv->phydev, 5, PTP_TX_PARSE_CONFIG, txcfg);
+
+	pkt_ts_enable = PTP_TIMESTAMP_EN_SYNC_ | PTP_TIMESTAMP_EN_DREQ_ |
+			PTP_TIMESTAMP_EN_PDREQ_ | PTP_TIMESTAMP_EN_PDRES_;
+	lanphy_write_page_reg(ptp_priv->phydev, 5, PTP_RX_TIMESTAMP_EN, pkt_ts_enable);
+	lanphy_write_page_reg(ptp_priv->phydev, 5, PTP_TX_TIMESTAMP_EN, pkt_ts_enable);
+
+	if (ptp_priv->hwts_tx_type == HWTSTAMP_TX_ONESTEP_SYNC)
+		lanphy_write_page_reg(ptp_priv->phydev, 5, PTP_TX_MOD,
+				      PTP_TX_MOD_TX_PTP_SYNC_TS_INSERT_);
+
+	if (config.rx_filter != HWTSTAMP_FILTER_NONE)
+		lan8814_config_ts_intr(ptp_priv->phydev, true);
+	else
+		lan8814_config_ts_intr(ptp_priv->phydev, false);
+
+	mutex_lock(&shared->shared_lock);
+	if (config.rx_filter != HWTSTAMP_FILTER_NONE)
+		shared->ref++;
+	else
+		shared->ref--;
+
+	if (shared->ref)
+		lanphy_write_page_reg(ptp_priv->phydev, 4, PTP_CMD_CTL,
+				      PTP_CMD_CTL_PTP_ENABLE_);
+	else
+		lanphy_write_page_reg(ptp_priv->phydev, 4, PTP_CMD_CTL,
+				      PTP_CMD_CTL_PTP_DISABLE_);
+	mutex_unlock(&shared->shared_lock);
+
+	/* In case of multiple starts and stops, these needs to be cleared */
+	list_for_each_entry_safe(rx_ts, tmp, &ptp_priv->rx_ts_list, list) {
+		list_del(&rx_ts->list);
+		kfree(rx_ts);
+	}
+	skb_queue_purge(&ptp_priv->rx_queue);
+	skb_queue_purge(&ptp_priv->tx_queue);
+
+	lan8814_flush_fifo(ptp_priv->phydev, false);
+	lan8814_flush_fifo(ptp_priv->phydev, true);
+
+	return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? -EFAULT : 0;
+}
+
+static void lan8814_txtstamp(struct mii_timestamper *mii_ts,
+			     struct sk_buff *skb, int type)
+{
+	struct kszphy_ptp_priv *ptp_priv = container_of(mii_ts, struct kszphy_ptp_priv, mii_ts);
+
+	switch (ptp_priv->hwts_tx_type) {
+	case HWTSTAMP_TX_ONESTEP_SYNC:
+		if (ptp_msg_is_sync(skb, type)) {
+			kfree_skb(skb);
+			return;
+		}
+		fallthrough;
+	case HWTSTAMP_TX_ON:
+		skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+		skb_queue_tail(&ptp_priv->tx_queue, skb);
+		break;
+	case HWTSTAMP_TX_OFF:
+	default:
+		kfree_skb(skb);
+		break;
+	}
+}
+
+static void lan8814_get_sig_rx(struct sk_buff *skb, u16 *sig)
+{
+	struct ptp_header *ptp_header;
+	u32 type;
+
+	skb_push(skb, ETH_HLEN);
+	type = ptp_classify_raw(skb);
+	ptp_header = ptp_parse_header(skb, type);
+	skb_pull_inline(skb, ETH_HLEN);
+
+	*sig = (__force u16)(ntohs(ptp_header->sequence_id));
+}
+
+static bool lan8814_match_rx_skb(struct kszphy_ptp_priv *ptp_priv,
+				 struct sk_buff *skb)
+{
+	struct skb_shared_hwtstamps *shhwtstamps;
+	struct lan8814_ptp_rx_ts *rx_ts, *tmp;
+	unsigned long flags;
+	bool ret = false;
+	u16 skb_sig;
+
+	lan8814_get_sig_rx(skb, &skb_sig);
+
+	/* Iterate over all RX timestamps and match it with the received skbs */
+	spin_lock_irqsave(&ptp_priv->rx_ts_lock, flags);
+	list_for_each_entry_safe(rx_ts, tmp, &ptp_priv->rx_ts_list, list) {
+		/* Check if we found the signature we were looking for. */
+		if (memcmp(&skb_sig, &rx_ts->seq_id, sizeof(rx_ts->seq_id)))
+			continue;
+
+		shhwtstamps = skb_hwtstamps(skb);
+		memset(shhwtstamps, 0, sizeof(*shhwtstamps));
+		shhwtstamps->hwtstamp = ktime_set(rx_ts->seconds,
+						  rx_ts->nsec);
+		list_del(&rx_ts->list);
+		kfree(rx_ts);
+
+		ret = true;
+		break;
+	}
+	spin_unlock_irqrestore(&ptp_priv->rx_ts_lock, flags);
+
+	if (ret)
+		netif_rx(skb);
+	return ret;
+}
+
+static bool lan8814_rxtstamp(struct mii_timestamper *mii_ts, struct sk_buff *skb, int type)
+{
+	struct kszphy_ptp_priv *ptp_priv =
+			container_of(mii_ts, struct kszphy_ptp_priv, mii_ts);
+
+	if (ptp_priv->rx_filter == HWTSTAMP_FILTER_NONE ||
+	    type == PTP_CLASS_NONE)
+		return false;
+
+	if ((type & ptp_priv->version) == 0 || (type & ptp_priv->layer) == 0)
+		return false;
+
+	/* If we failed to match then add it to the queue for when the timestamp
+	 * will come
+	 */
+	if (!lan8814_match_rx_skb(ptp_priv, skb))
+		skb_queue_tail(&ptp_priv->rx_queue, skb);
+
+	return true;
+}
+
+static void lan8814_ptp_clock_set(struct phy_device *phydev,
+				  u32 seconds, u32 nano_seconds)
+{
+	u32 sec_low, sec_high, nsec_low, nsec_high;
+
+	sec_low = seconds & 0xffff;
+	sec_high = (seconds >> 16) & 0xffff;
+	nsec_low = nano_seconds & 0xffff;
+	nsec_high = (nano_seconds >> 16) & 0x3fff;
+
+	lanphy_write_page_reg(phydev, 4, PTP_CLOCK_SET_SEC_LO, sec_low);
+	lanphy_write_page_reg(phydev, 4, PTP_CLOCK_SET_SEC_MID, sec_high);
+	lanphy_write_page_reg(phydev, 4, PTP_CLOCK_SET_NS_LO, nsec_low);
+	lanphy_write_page_reg(phydev, 4, PTP_CLOCK_SET_NS_HI, nsec_high);
+
+	lanphy_write_page_reg(phydev, 4, PTP_CMD_CTL, PTP_CMD_CTL_PTP_CLOCK_LOAD_);
+}
+
+static void lan8814_ptp_clock_get(struct phy_device *phydev,
+				  u32 *seconds, u32 *nano_seconds)
+{
+	lanphy_write_page_reg(phydev, 4, PTP_CMD_CTL, PTP_CMD_CTL_PTP_CLOCK_READ_);
+
+	*seconds = lanphy_read_page_reg(phydev, 4, PTP_CLOCK_READ_SEC_MID);
+	*seconds = (*seconds << 16) |
+		   lanphy_read_page_reg(phydev, 4, PTP_CLOCK_READ_SEC_LO);
+
+	*nano_seconds = lanphy_read_page_reg(phydev, 4, PTP_CLOCK_READ_NS_HI);
+	*nano_seconds = ((*nano_seconds & 0x3fff) << 16) |
+			lanphy_read_page_reg(phydev, 4, PTP_CLOCK_READ_NS_LO);
+}
+
+static int lan8814_ptpci_gettime64(struct ptp_clock_info *ptpci,
+				   struct timespec64 *ts)
+{
+	struct lan8814_shared_priv *shared = container_of(ptpci, struct lan8814_shared_priv,
+							  ptp_clock_info);
+	struct phy_device *phydev = shared->phydev;
+	u32 nano_seconds;
+	u32 seconds;
+
+	mutex_lock(&shared->shared_lock);
+	lan8814_ptp_clock_get(phydev, &seconds, &nano_seconds);
+	mutex_unlock(&shared->shared_lock);
+	ts->tv_sec = seconds;
+	ts->tv_nsec = nano_seconds;
+
+	return 0;
+}
+
+static int lan8814_ptpci_settime64(struct ptp_clock_info *ptpci,
+				   const struct timespec64 *ts)
+{
+	struct lan8814_shared_priv *shared = container_of(ptpci, struct lan8814_shared_priv,
+							  ptp_clock_info);
+	struct phy_device *phydev = shared->phydev;
+
+	mutex_lock(&shared->shared_lock);
+	lan8814_ptp_clock_set(phydev, ts->tv_sec, ts->tv_nsec);
+	mutex_unlock(&shared->shared_lock);
+
+	return 0;
+}
+
+static void lan8814_ptp_clock_step(struct phy_device *phydev,
+				   s64 time_step_ns)
+{
+	u32 nano_seconds_step;
+	u64 abs_time_step_ns;
+	u32 unsigned_seconds;
+	u32 nano_seconds;
+	u32 remainder;
+	s32 seconds;
+
+	if (time_step_ns >  15000000000LL) {
+		/* convert to clock set */
+		lan8814_ptp_clock_get(phydev, &unsigned_seconds, &nano_seconds);
+		unsigned_seconds += div_u64_rem(time_step_ns, 1000000000LL,
+						&remainder);
+		nano_seconds += remainder;
+		if (nano_seconds >= 1000000000) {
+			unsigned_seconds++;
+			nano_seconds -= 1000000000;
+		}
+		lan8814_ptp_clock_set(phydev, unsigned_seconds, nano_seconds);
+		return;
+	} else if (time_step_ns < -15000000000LL) {
+		/* convert to clock set */
+		time_step_ns = -time_step_ns;
+
+		lan8814_ptp_clock_get(phydev, &unsigned_seconds, &nano_seconds);
+		unsigned_seconds -= div_u64_rem(time_step_ns, 1000000000LL,
+						&remainder);
+		nano_seconds_step = remainder;
+		if (nano_seconds < nano_seconds_step) {
+			unsigned_seconds--;
+			nano_seconds += 1000000000;
+		}
+		nano_seconds -= nano_seconds_step;
+		lan8814_ptp_clock_set(phydev, unsigned_seconds,
+				      nano_seconds);
+		return;
+	}
+
+	/* do clock step */
+	if (time_step_ns >= 0) {
+		abs_time_step_ns = (u64)time_step_ns;
+		seconds = (s32)div_u64_rem(abs_time_step_ns, 1000000000,
+					   &remainder);
+		nano_seconds = remainder;
+	} else {
+		abs_time_step_ns = (u64)(-time_step_ns);
+		seconds = -((s32)div_u64_rem(abs_time_step_ns, 1000000000,
+			    &remainder));
+		nano_seconds = remainder;
+		if (nano_seconds > 0) {
+			/* subtracting nano seconds is not allowed
+			 * convert to subtracting from seconds,
+			 * and adding to nanoseconds
+			 */
+			seconds--;
+			nano_seconds = (1000000000 - nano_seconds);
+		}
+	}
+
+	if (nano_seconds > 0) {
+		/* add 8 ns to cover the likely normal increment */
+		nano_seconds += 8;
+	}
+
+	if (nano_seconds >= 1000000000) {
+		/* carry into seconds */
+		seconds++;
+		nano_seconds -= 1000000000;
+	}
+
+	while (seconds) {
+		if (seconds > 0) {
+			u32 adjustment_value = (u32)seconds;
+			u16 adjustment_value_lo, adjustment_value_hi;
+
+			if (adjustment_value > 0xF)
+				adjustment_value = 0xF;
+
+			adjustment_value_lo = adjustment_value & 0xffff;
+			adjustment_value_hi = (adjustment_value >> 16) & 0x3fff;
+
+			lanphy_write_page_reg(phydev, 4, PTP_LTC_STEP_ADJ_LO,
+					      adjustment_value_lo);
+			lanphy_write_page_reg(phydev, 4, PTP_LTC_STEP_ADJ_HI,
+					      PTP_LTC_STEP_ADJ_DIR_ |
+					      adjustment_value_hi);
+			seconds -= ((s32)adjustment_value);
+		} else {
+			u32 adjustment_value = (u32)(-seconds);
+			u16 adjustment_value_lo, adjustment_value_hi;
+
+			if (adjustment_value > 0xF)
+				adjustment_value = 0xF;
+
+			adjustment_value_lo = adjustment_value & 0xffff;
+			adjustment_value_hi = (adjustment_value >> 16) & 0x3fff;
+
+			lanphy_write_page_reg(phydev, 4, PTP_LTC_STEP_ADJ_LO,
+					      adjustment_value_lo);
+			lanphy_write_page_reg(phydev, 4, PTP_LTC_STEP_ADJ_HI,
+					      adjustment_value_hi);
+			seconds += ((s32)adjustment_value);
+		}
+		lanphy_write_page_reg(phydev, 4, PTP_CMD_CTL,
+				      PTP_CMD_CTL_PTP_LTC_STEP_SEC_);
+	}
+	if (nano_seconds) {
+		u16 nano_seconds_lo;
+		u16 nano_seconds_hi;
+
+		nano_seconds_lo = nano_seconds & 0xffff;
+		nano_seconds_hi = (nano_seconds >> 16) & 0x3fff;
+
+		lanphy_write_page_reg(phydev, 4, PTP_LTC_STEP_ADJ_LO,
+				      nano_seconds_lo);
+		lanphy_write_page_reg(phydev, 4, PTP_LTC_STEP_ADJ_HI,
+				      PTP_LTC_STEP_ADJ_DIR_ |
+				      nano_seconds_hi);
+		lanphy_write_page_reg(phydev, 4, PTP_CMD_CTL,
+				      PTP_CMD_CTL_PTP_LTC_STEP_NSEC_);
+	}
+}
+
+static int lan8814_ptpci_adjtime(struct ptp_clock_info *ptpci, s64 delta)
+{
+	struct lan8814_shared_priv *shared = container_of(ptpci, struct lan8814_shared_priv,
+							  ptp_clock_info);
+	struct phy_device *phydev = shared->phydev;
+
+	mutex_lock(&shared->shared_lock);
+	lan8814_ptp_clock_step(phydev, delta);
+	mutex_unlock(&shared->shared_lock);
+
+	return 0;
+}
+
+static int lan8814_ptpci_adjfine(struct ptp_clock_info *ptpci, long scaled_ppm)
+{
+	struct lan8814_shared_priv *shared = container_of(ptpci, struct lan8814_shared_priv,
+							  ptp_clock_info);
+	struct phy_device *phydev = shared->phydev;
+	u16 kszphy_rate_adj_lo, kszphy_rate_adj_hi;
+	bool positive = true;
+	u32 kszphy_rate_adj;
+
+	if (scaled_ppm < 0) {
+		scaled_ppm = -scaled_ppm;
+		positive = false;
+	}
+
+	kszphy_rate_adj = LAN8814_1PPM_FORMAT * (scaled_ppm >> 16);
+	kszphy_rate_adj += (LAN8814_1PPM_FORMAT * (0xffff & scaled_ppm)) >> 16;
+
+	kszphy_rate_adj_lo = kszphy_rate_adj & 0xffff;
+	kszphy_rate_adj_hi = (kszphy_rate_adj >> 16) & 0x3fff;
+
+	if (positive)
+		kszphy_rate_adj_hi |= PTP_CLOCK_RATE_ADJ_DIR_;
+
+	mutex_lock(&shared->shared_lock);
+	lanphy_write_page_reg(phydev, 4, PTP_CLOCK_RATE_ADJ_HI, kszphy_rate_adj_hi);
+	lanphy_write_page_reg(phydev, 4, PTP_CLOCK_RATE_ADJ_LO, kszphy_rate_adj_lo);
+	mutex_unlock(&shared->shared_lock);
+
+	return 0;
+}
+
+static void lan8814_get_sig_tx(struct sk_buff *skb, u16 *sig)
+{
+	struct ptp_header *ptp_header;
+	u32 type;
+
+	type = ptp_classify_raw(skb);
+	ptp_header = ptp_parse_header(skb, type);
+
+	*sig = (__force u16)(ntohs(ptp_header->sequence_id));
+}
+
+static void lan8814_match_tx_skb(struct kszphy_ptp_priv *ptp_priv,
+				 u32 seconds, u32 nsec, u16 seq_id)
+{
+	struct skb_shared_hwtstamps shhwtstamps;
+	struct sk_buff *skb, *skb_tmp;
+	unsigned long flags;
+	bool ret = false;
+	u16 skb_sig;
+
+	spin_lock_irqsave(&ptp_priv->tx_queue.lock, flags);
+	skb_queue_walk_safe(&ptp_priv->tx_queue, skb, skb_tmp) {
+		lan8814_get_sig_tx(skb, &skb_sig);
+
+		if (memcmp(&skb_sig, &seq_id, sizeof(seq_id)))
+			continue;
+
+		__skb_unlink(skb, &ptp_priv->tx_queue);
+		ret = true;
+		break;
+	}
+	spin_unlock_irqrestore(&ptp_priv->tx_queue.lock, flags);
+
+	if (ret) {
+		memset(&shhwtstamps, 0, sizeof(shhwtstamps));
+		shhwtstamps.hwtstamp = ktime_set(seconds, nsec);
+		skb_complete_tx_timestamp(skb, &shhwtstamps);
+	}
+}
+
+static void lan8814_dequeue_tx_skb(struct kszphy_ptp_priv *ptp_priv)
+{
+	struct phy_device *phydev = ptp_priv->phydev;
+	u32 seconds, nsec;
+	u16 seq_id;
+
+	lan8814_ptp_tx_ts_get(phydev, &seconds, &nsec, &seq_id);
+	lan8814_match_tx_skb(ptp_priv, seconds, nsec, seq_id);
+}
+
+static void lan8814_get_tx_ts(struct kszphy_ptp_priv *ptp_priv)
+{
+	struct phy_device *phydev = ptp_priv->phydev;
+	u32 reg;
+
+	do {
+		lan8814_dequeue_tx_skb(ptp_priv);
+
+		/* If other timestamps are available in the FIFO,
+		 * process them.
+		 */
+		reg = lanphy_read_page_reg(phydev, 5, PTP_CAP_INFO);
+	} while (PTP_CAP_INFO_TX_TS_CNT_GET_(reg) > 0);
+}
+
+static bool lan8814_match_skb(struct kszphy_ptp_priv *ptp_priv,
+			      struct lan8814_ptp_rx_ts *rx_ts)
+{
+	struct skb_shared_hwtstamps *shhwtstamps;
+	struct sk_buff *skb, *skb_tmp;
+	unsigned long flags;
+	bool ret = false;
+	u16 skb_sig;
+
+	spin_lock_irqsave(&ptp_priv->rx_queue.lock, flags);
+	skb_queue_walk_safe(&ptp_priv->rx_queue, skb, skb_tmp) {
+		lan8814_get_sig_rx(skb, &skb_sig);
+
+		if (memcmp(&skb_sig, &rx_ts->seq_id, sizeof(rx_ts->seq_id)))
+			continue;
+
+		__skb_unlink(skb, &ptp_priv->rx_queue);
+
+		ret = true;
+		break;
+	}
+	spin_unlock_irqrestore(&ptp_priv->rx_queue.lock, flags);
+
+	if (ret) {
+		shhwtstamps = skb_hwtstamps(skb);
+		memset(shhwtstamps, 0, sizeof(*shhwtstamps));
+		shhwtstamps->hwtstamp = ktime_set(rx_ts->seconds, rx_ts->nsec);
+		netif_rx(skb);
+	}
+
+	return ret;
+}
+
+static void lan8814_match_rx_ts(struct kszphy_ptp_priv *ptp_priv,
+				struct lan8814_ptp_rx_ts *rx_ts)
+{
+	unsigned long flags;
+
+	/* If we failed to match the skb add it to the queue for when
+	 * the frame will come
+	 */
+	if (!lan8814_match_skb(ptp_priv, rx_ts)) {
+		spin_lock_irqsave(&ptp_priv->rx_ts_lock, flags);
+		list_add(&rx_ts->list, &ptp_priv->rx_ts_list);
+		spin_unlock_irqrestore(&ptp_priv->rx_ts_lock, flags);
+	} else {
+		kfree(rx_ts);
+	}
+}
+
+static void lan8814_get_rx_ts(struct kszphy_ptp_priv *ptp_priv)
+{
+	struct phy_device *phydev = ptp_priv->phydev;
+	struct lan8814_ptp_rx_ts *rx_ts;
+	u32 reg;
+
+	do {
+		rx_ts = kzalloc(sizeof(*rx_ts), GFP_KERNEL);
+		if (!rx_ts)
+			return;
+
+		lan8814_ptp_rx_ts_get(phydev, &rx_ts->seconds, &rx_ts->nsec,
+				      &rx_ts->seq_id);
+		lan8814_match_rx_ts(ptp_priv, rx_ts);
+
+		/* If other timestamps are available in the FIFO,
+		 * process them.
+		 */
+		reg = lanphy_read_page_reg(phydev, 5, PTP_CAP_INFO);
+	} while (PTP_CAP_INFO_RX_TS_CNT_GET_(reg) > 0);
+}
+
+static void lan8814_handle_ptp_interrupt(struct phy_device *phydev, u16 status)
+{
+	struct kszphy_priv *priv = phydev->priv;
+	struct kszphy_ptp_priv *ptp_priv = &priv->ptp_priv;
+
+	if (status & PTP_TSU_INT_STS_PTP_TX_TS_EN_)
+		lan8814_get_tx_ts(ptp_priv);
+
+	if (status & PTP_TSU_INT_STS_PTP_RX_TS_EN_)
+		lan8814_get_rx_ts(ptp_priv);
+
+	if (status & PTP_TSU_INT_STS_PTP_TX_TS_OVRFL_INT_) {
+		lan8814_flush_fifo(phydev, true);
+		skb_queue_purge(&ptp_priv->tx_queue);
+	}
+
+	if (status & PTP_TSU_INT_STS_PTP_RX_TS_OVRFL_INT_) {
+		lan8814_flush_fifo(phydev, false);
+		skb_queue_purge(&ptp_priv->rx_queue);
+	}
+}
+
+static int lan8804_config_init(struct phy_device *phydev)
+{
+	int val;
+
+	/* MDI-X setting for swap A,B transmit */
+	val = lanphy_read_page_reg(phydev, 2, LAN8804_ALIGN_SWAP);
+	val &= ~LAN8804_ALIGN_TX_A_B_SWAP_MASK;
+	val |= LAN8804_ALIGN_TX_A_B_SWAP;
+	lanphy_write_page_reg(phydev, 2, LAN8804_ALIGN_SWAP, val);
+
+	/* Make sure that the PHY will not stop generating the clock when the
+	 * link partner goes down
+	 */
+	lanphy_write_page_reg(phydev, 31, LAN8814_CLOCK_MANAGEMENT, 0x27e);
+	lanphy_read_page_reg(phydev, 1, LAN8814_LINK_QUALITY);
+
+	return 0;
+}
+
+static irqreturn_t lan8804_handle_interrupt(struct phy_device *phydev)
+{
+	int status;
+
+	status = phy_read(phydev, LAN8814_INTS);
+	if (status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	if (status > 0)
+		phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
+#define LAN8804_OUTPUT_CONTROL			25
+#define LAN8804_OUTPUT_CONTROL_INTR_BUFFER	BIT(14)
+#define LAN8804_CONTROL				31
+#define LAN8804_CONTROL_INTR_POLARITY		BIT(14)
+
+static int lan8804_config_intr(struct phy_device *phydev)
+{
+	int err;
+
+	/* This is an internal PHY of lan966x and is not possible to change the
+	 * polarity on the GIC found in lan966x, therefore change the polarity
+	 * of the interrupt in the PHY from being active low instead of active
+	 * high.
+	 */
+	phy_write(phydev, LAN8804_CONTROL, LAN8804_CONTROL_INTR_POLARITY);
+
+	/* By default interrupt buffer is open-drain in which case the interrupt
+	 * can be active only low. Therefore change the interrupt buffer to be
+	 * push-pull to be able to change interrupt polarity
+	 */
+	phy_write(phydev, LAN8804_OUTPUT_CONTROL,
+		  LAN8804_OUTPUT_CONTROL_INTR_BUFFER);
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		err = phy_read(phydev, LAN8814_INTS);
+		if (err < 0)
+			return err;
+
+		err = phy_write(phydev, LAN8814_INTC, LAN8814_INT_LINK);
+		if (err)
+			return err;
+	} else {
+		err = phy_write(phydev, LAN8814_INTC, 0);
+		if (err)
+			return err;
+
+		err = phy_read(phydev, LAN8814_INTS);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+static irqreturn_t lan8814_handle_interrupt(struct phy_device *phydev)
+{
+	int ret = IRQ_NONE;
+	int irq_status;
+
+	irq_status = phy_read(phydev, LAN8814_INTS);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	if (irq_status & LAN8814_INT_LINK) {
+		phy_trigger_machine(phydev);
+		ret = IRQ_HANDLED;
+	}
+
+	while (true) {
+		irq_status = lanphy_read_page_reg(phydev, 5, PTP_TSU_INT_STS);
+		if (!irq_status)
+			break;
+
+		lan8814_handle_ptp_interrupt(phydev, irq_status);
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static int lan8814_ack_interrupt(struct phy_device *phydev)
+{
+	/* bit[12..0] int status, which is a read and clear register. */
+	int rc;
+
+	rc = phy_read(phydev, LAN8814_INTS);
+
+	return (rc < 0) ? rc : 0;
+}
+
+static int lan8814_config_intr(struct phy_device *phydev)
+{
+	int err;
+
+	lanphy_write_page_reg(phydev, 4, LAN8814_INTR_CTRL_REG,
+			      LAN8814_INTR_CTRL_REG_POLARITY |
+			      LAN8814_INTR_CTRL_REG_INTR_ENABLE);
+
+	/* enable / disable interrupts */
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		err = lan8814_ack_interrupt(phydev);
+		if (err)
+			return err;
+
+		err = phy_write(phydev, LAN8814_INTC, LAN8814_INT_LINK);
+	} else {
+		err = phy_write(phydev, LAN8814_INTC, 0);
+		if (err)
+			return err;
+
+		err = lan8814_ack_interrupt(phydev);
+	}
+
+	return err;
+}
+
+static void lan8814_ptp_init(struct phy_device *phydev)
+{
+	struct kszphy_priv *priv = phydev->priv;
+	struct kszphy_ptp_priv *ptp_priv = &priv->ptp_priv;
+	u32 temp;
+
+	if (!IS_ENABLED(CONFIG_PTP_1588_CLOCK) ||
+	    !IS_ENABLED(CONFIG_NETWORK_PHY_TIMESTAMPING))
+		return;
+
+	lanphy_write_page_reg(phydev, 5, TSU_HARD_RESET, TSU_HARD_RESET_);
+
+	temp = lanphy_read_page_reg(phydev, 5, PTP_TX_MOD);
+	temp |= PTP_TX_MOD_BAD_UDPV4_CHKSUM_FORCE_FCS_DIS_;
+	lanphy_write_page_reg(phydev, 5, PTP_TX_MOD, temp);
+
+	temp = lanphy_read_page_reg(phydev, 5, PTP_RX_MOD);
+	temp |= PTP_RX_MOD_BAD_UDPV4_CHKSUM_FORCE_FCS_DIS_;
+	lanphy_write_page_reg(phydev, 5, PTP_RX_MOD, temp);
+
+	lanphy_write_page_reg(phydev, 5, PTP_RX_PARSE_CONFIG, 0);
+	lanphy_write_page_reg(phydev, 5, PTP_TX_PARSE_CONFIG, 0);
+
+	/* Removing default registers configs related to L2 and IP */
+	lanphy_write_page_reg(phydev, 5, PTP_TX_PARSE_L2_ADDR_EN, 0);
+	lanphy_write_page_reg(phydev, 5, PTP_RX_PARSE_L2_ADDR_EN, 0);
+	lanphy_write_page_reg(phydev, 5, PTP_TX_PARSE_IP_ADDR_EN, 0);
+	lanphy_write_page_reg(phydev, 5, PTP_RX_PARSE_IP_ADDR_EN, 0);
+
+	skb_queue_head_init(&ptp_priv->tx_queue);
+	skb_queue_head_init(&ptp_priv->rx_queue);
+	INIT_LIST_HEAD(&ptp_priv->rx_ts_list);
+	spin_lock_init(&ptp_priv->rx_ts_lock);
+
+	ptp_priv->phydev = phydev;
+
+	ptp_priv->mii_ts.rxtstamp = lan8814_rxtstamp;
+	ptp_priv->mii_ts.txtstamp = lan8814_txtstamp;
+	ptp_priv->mii_ts.hwtstamp = lan8814_hwtstamp;
+	ptp_priv->mii_ts.ts_info  = lan8814_ts_info;
+
+	phydev->mii_ts = &ptp_priv->mii_ts;
+}
+
+static int lan8814_ptp_probe_once(struct phy_device *phydev)
+{
+	struct lan8814_shared_priv *shared = phydev->shared->priv;
+
+	/* Initialise shared lock for clock*/
+	mutex_init(&shared->shared_lock);
+
+	shared->ptp_clock_info.owner = THIS_MODULE;
+	snprintf(shared->ptp_clock_info.name, 30, "%s", phydev->drv->name);
+	shared->ptp_clock_info.max_adj = 31249999;
+	shared->ptp_clock_info.n_alarm = 0;
+	shared->ptp_clock_info.n_ext_ts = 0;
+	shared->ptp_clock_info.n_pins = 0;
+	shared->ptp_clock_info.pps = 0;
+	shared->ptp_clock_info.pin_config = NULL;
+	shared->ptp_clock_info.adjfine = lan8814_ptpci_adjfine;
+	shared->ptp_clock_info.adjtime = lan8814_ptpci_adjtime;
+	shared->ptp_clock_info.gettime64 = lan8814_ptpci_gettime64;
+	shared->ptp_clock_info.settime64 = lan8814_ptpci_settime64;
+	shared->ptp_clock_info.getcrosststamp = NULL;
+
+	shared->ptp_clock = ptp_clock_register(&shared->ptp_clock_info,
+					       &phydev->mdio.dev);
+	if (IS_ERR(shared->ptp_clock)) {
+		phydev_err(phydev, "ptp_clock_register failed %lu\n",
+			   PTR_ERR(shared->ptp_clock));
+		return -EINVAL;
+	}
+
+	/* Check if PHC support is missing at the configuration level */
+	if (!shared->ptp_clock)
+		return 0;
+
+	phydev_dbg(phydev, "successfully registered ptp clock\n");
+
+	shared->phydev = phydev;
+
+	/* The EP.4 is shared between all the PHYs in the package and also it
+	 * can be accessed by any of the PHYs
+	 */
+	lanphy_write_page_reg(phydev, 4, LTC_HARD_RESET, LTC_HARD_RESET_);
+	lanphy_write_page_reg(phydev, 4, PTP_OPERATING_MODE,
+			      PTP_OPERATING_MODE_STANDALONE_);
+
+	return 0;
+}
+
+static void lan8814_setup_led(struct phy_device *phydev, int val)
+{
+	int temp;
+
+	temp = lanphy_read_page_reg(phydev, 5, LAN8814_LED_CTRL_1);
+
+	if (val)
+		temp |= LAN8814_LED_CTRL_1_KSZ9031_LED_MODE_;
+	else
+		temp &= ~LAN8814_LED_CTRL_1_KSZ9031_LED_MODE_;
+
+	lanphy_write_page_reg(phydev, 5, LAN8814_LED_CTRL_1, temp);
+}
+
+static int lan8814_config_init(struct phy_device *phydev)
+{
+	struct kszphy_priv *lan8814 = phydev->priv;
+	int val;
+
+	/* Reset the PHY */
+	val = lanphy_read_page_reg(phydev, 4, LAN8814_QSGMII_SOFT_RESET);
+	val |= LAN8814_QSGMII_SOFT_RESET_BIT;
+	lanphy_write_page_reg(phydev, 4, LAN8814_QSGMII_SOFT_RESET, val);
+
+	/* Disable ANEG with QSGMII PCS Host side */
+	val = lanphy_read_page_reg(phydev, 5, LAN8814_QSGMII_PCS1G_ANEG_CONFIG);
+	val &= ~LAN8814_QSGMII_PCS1G_ANEG_CONFIG_ANEG_ENA;
+	lanphy_write_page_reg(phydev, 5, LAN8814_QSGMII_PCS1G_ANEG_CONFIG, val);
+
+	/* MDI-X setting for swap A,B transmit */
+	val = lanphy_read_page_reg(phydev, 2, LAN8814_ALIGN_SWAP);
+	val &= ~LAN8814_ALIGN_TX_A_B_SWAP_MASK;
+	val |= LAN8814_ALIGN_TX_A_B_SWAP;
+	lanphy_write_page_reg(phydev, 2, LAN8814_ALIGN_SWAP, val);
+
+	if (lan8814->led_mode >= 0)
+		lan8814_setup_led(phydev, lan8814->led_mode);
+
+	return 0;
+}
+
+/* It is expected that there will not be any 'lan8814_take_coma_mode'
+ * function called in suspend. Because the GPIO line can be shared, so if one of
+ * the phys goes back in coma mode, then all the other PHYs will go, which is
+ * wrong.
+ */
+static int lan8814_release_coma_mode(struct phy_device *phydev)
+{
+	struct gpio_desc *gpiod;
+
+	gpiod = devm_gpiod_get_optional(&phydev->mdio.dev, "coma-mode",
+					GPIOD_OUT_HIGH_OPEN_DRAIN |
+					GPIOD_FLAGS_BIT_NONEXCLUSIVE);
+	if (IS_ERR(gpiod))
+		return PTR_ERR(gpiod);
+
+	gpiod_set_consumer_name(gpiod, "LAN8814 coma mode");
+	gpiod_set_value_cansleep(gpiod, 0);
+
+	return 0;
+}
+
+static int lan8814_probe(struct phy_device *phydev)
+{
+	const struct kszphy_type *type = phydev->drv->driver_data;
+	struct kszphy_priv *priv;
+	u16 addr;
+	int err;
+
+	priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	phydev->priv = priv;
+
+	priv->type = type;
+
+	kszphy_parse_led_mode(phydev);
+
+	/* Strap-in value for PHY address, below register read gives starting
+	 * phy address value
+	 */
+	addr = lanphy_read_page_reg(phydev, 4, 0) & 0x1F;
+	devm_phy_package_join(&phydev->mdio.dev, phydev,
+			      addr, sizeof(struct lan8814_shared_priv));
+
+	if (phy_package_init_once(phydev)) {
+		err = lan8814_release_coma_mode(phydev);
+		if (err)
+			return err;
+
+		err = lan8814_ptp_probe_once(phydev);
+		if (err)
+			return err;
+	}
+
+	lan8814_ptp_init(phydev);
+
+	return 0;
+}
+
+#define LAN8841_MMD_TIMER_REG			0
+#define LAN8841_MMD0_REGISTER_17		17
+#define LAN8841_MMD0_REGISTER_17_DROP_OPT(x)	((x) & 0x3)
+#define LAN8841_MMD0_REGISTER_17_XMIT_TOG_TX_DIS	BIT(3)
+#define LAN8841_OPERATION_MODE_STRAP_OVERRIDE_LOW_REG	2
+#define LAN8841_OPERATION_MODE_STRAP_OVERRIDE_LOW_REG_MAGJACK	BIT(14)
+#define LAN8841_MMD_ANALOG_REG			28
+#define LAN8841_ANALOG_CONTROL_1		1
+#define LAN8841_ANALOG_CONTROL_1_PLL_TRIM(x)	(((x) & 0x3) << 5)
+#define LAN8841_ANALOG_CONTROL_10		13
+#define LAN8841_ANALOG_CONTROL_10_PLL_DIV(x)	((x) & 0x3)
+#define LAN8841_ANALOG_CONTROL_11		14
+#define LAN8841_ANALOG_CONTROL_11_LDO_REF(x)	(((x) & 0x7) << 12)
+#define LAN8841_TX_LOW_I_CH_C_D_POWER_MANAGMENT	69
+#define LAN8841_TX_LOW_I_CH_C_D_POWER_MANAGMENT_VAL 0xbffc
+#define LAN8841_BTRX_POWER_DOWN			70
+#define LAN8841_BTRX_POWER_DOWN_QBIAS_CH_A	BIT(0)
+#define LAN8841_BTRX_POWER_DOWN_BTRX_CH_A	BIT(1)
+#define LAN8841_BTRX_POWER_DOWN_QBIAS_CH_B	BIT(2)
+#define LAN8841_BTRX_POWER_DOWN_BTRX_CH_B	BIT(3)
+#define LAN8841_BTRX_POWER_DOWN_BTRX_CH_C	BIT(5)
+#define LAN8841_BTRX_POWER_DOWN_BTRX_CH_D	BIT(7)
+#define LAN8841_ADC_CHANNEL_MASK		198
+#define LAN8841_PTP_RX_PARSE_L2_ADDR_EN		370
+#define LAN8841_PTP_RX_PARSE_IP_ADDR_EN		371
+#define LAN8841_PTP_TX_PARSE_L2_ADDR_EN		434
+#define LAN8841_PTP_TX_PARSE_IP_ADDR_EN		435
+#define LAN8841_PTP_CMD_CTL			256
+#define LAN8841_PTP_CMD_CTL_PTP_ENABLE		BIT(2)
+#define LAN8841_PTP_CMD_CTL_PTP_DISABLE		BIT(1)
+#define LAN8841_PTP_CMD_CTL_PTP_RESET		BIT(0)
+#define LAN8841_PTP_RX_PARSE_CONFIG		368
+#define LAN8841_PTP_TX_PARSE_CONFIG		432
+
+static int lan8841_config_init(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = ksz9131_config_init(phydev);
+	if (ret)
+		return ret;
+
+	/* Initialize the HW by resetting everything */
+	phy_modify_mmd(phydev, KSZ9131RN_MMD_COMMON_CTRL_REG,
+		       LAN8841_PTP_CMD_CTL,
+		       LAN8841_PTP_CMD_CTL_PTP_RESET,
+		       LAN8841_PTP_CMD_CTL_PTP_RESET);
+
+	phy_modify_mmd(phydev, KSZ9131RN_MMD_COMMON_CTRL_REG,
+		       LAN8841_PTP_CMD_CTL,
+		       LAN8841_PTP_CMD_CTL_PTP_ENABLE,
+		       LAN8841_PTP_CMD_CTL_PTP_ENABLE);
+
+	/* Don't process any frames */
+	phy_write_mmd(phydev, KSZ9131RN_MMD_COMMON_CTRL_REG,
+		      LAN8841_PTP_RX_PARSE_CONFIG, 0);
+	phy_write_mmd(phydev, KSZ9131RN_MMD_COMMON_CTRL_REG,
+		      LAN8841_PTP_TX_PARSE_CONFIG, 0);
+	phy_write_mmd(phydev, KSZ9131RN_MMD_COMMON_CTRL_REG,
+		      LAN8841_PTP_TX_PARSE_L2_ADDR_EN, 0);
+	phy_write_mmd(phydev, KSZ9131RN_MMD_COMMON_CTRL_REG,
+		      LAN8841_PTP_RX_PARSE_L2_ADDR_EN, 0);
+	phy_write_mmd(phydev, KSZ9131RN_MMD_COMMON_CTRL_REG,
+		      LAN8841_PTP_TX_PARSE_IP_ADDR_EN, 0);
+	phy_write_mmd(phydev, KSZ9131RN_MMD_COMMON_CTRL_REG,
+		      LAN8841_PTP_RX_PARSE_IP_ADDR_EN, 0);
+
+	/* 100BT Clause 40 improvenent errata */
+	phy_write_mmd(phydev, LAN8841_MMD_ANALOG_REG,
+		      LAN8841_ANALOG_CONTROL_1,
+		      LAN8841_ANALOG_CONTROL_1_PLL_TRIM(0x2));
+	phy_write_mmd(phydev, LAN8841_MMD_ANALOG_REG,
+		      LAN8841_ANALOG_CONTROL_10,
+		      LAN8841_ANALOG_CONTROL_10_PLL_DIV(0x1));
+
+	/* 10M/100M Ethernet Signal Tuning Errata for Shorted-Center Tap
+	 * Magnetics
+	 */
+	ret = phy_read_mmd(phydev, KSZ9131RN_MMD_COMMON_CTRL_REG,
+			   LAN8841_OPERATION_MODE_STRAP_OVERRIDE_LOW_REG);
+	if (ret & LAN8841_OPERATION_MODE_STRAP_OVERRIDE_LOW_REG_MAGJACK) {
+		phy_write_mmd(phydev, LAN8841_MMD_ANALOG_REG,
+			      LAN8841_TX_LOW_I_CH_C_D_POWER_MANAGMENT,
+			      LAN8841_TX_LOW_I_CH_C_D_POWER_MANAGMENT_VAL);
+		phy_write_mmd(phydev, LAN8841_MMD_ANALOG_REG,
+			      LAN8841_BTRX_POWER_DOWN,
+			      LAN8841_BTRX_POWER_DOWN_QBIAS_CH_A |
+			      LAN8841_BTRX_POWER_DOWN_BTRX_CH_A |
+			      LAN8841_BTRX_POWER_DOWN_QBIAS_CH_B |
+			      LAN8841_BTRX_POWER_DOWN_BTRX_CH_B |
+			      LAN8841_BTRX_POWER_DOWN_BTRX_CH_C |
+			      LAN8841_BTRX_POWER_DOWN_BTRX_CH_D);
+	}
+
+	/* LDO Adjustment errata */
+	phy_write_mmd(phydev, LAN8841_MMD_ANALOG_REG,
+		      LAN8841_ANALOG_CONTROL_11,
+		      LAN8841_ANALOG_CONTROL_11_LDO_REF(1));
+
+	/* 100BT RGMII latency tuning errata */
+	phy_write_mmd(phydev, MDIO_MMD_PMAPMD,
+		      LAN8841_ADC_CHANNEL_MASK, 0x0);
+	phy_write_mmd(phydev, LAN8841_MMD_TIMER_REG,
+		      LAN8841_MMD0_REGISTER_17,
+		      LAN8841_MMD0_REGISTER_17_DROP_OPT(2) |
+		      LAN8841_MMD0_REGISTER_17_XMIT_TOG_TX_DIS);
+
+	return 0;
+}
+
+#define LAN8841_OUTPUT_CTRL			25
+#define LAN8841_OUTPUT_CTRL_INT_BUFFER		BIT(14)
+#define LAN8841_INT_PTP				BIT(9)
+
+static int lan8841_config_intr(struct phy_device *phydev)
+{
+	int err;
+
+	phy_modify(phydev, LAN8841_OUTPUT_CTRL,
+		   LAN8841_OUTPUT_CTRL_INT_BUFFER, 0);
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		err = phy_read(phydev, LAN8814_INTS);
+		if (err)
+			return err;
+
+		/* Enable / disable interrupts. It is OK to enable PTP interrupt
+		 * even if it PTP is not enabled. Because the underneath blocks
+		 * will not enable the PTP so we will never get the PTP
+		 * interrupt.
+		 */
+		err = phy_write(phydev, LAN8814_INTC,
+				LAN8814_INT_LINK | LAN8841_INT_PTP);
+	} else {
+		err = phy_write(phydev, LAN8814_INTC, 0);
+		if (err)
+			return err;
+
+		err = phy_read(phydev, LAN8814_INTS);
+	}
+
+	return err;
+}
+
+#define LAN8841_PTP_TX_EGRESS_SEC_LO			453
+#define LAN8841_PTP_TX_EGRESS_SEC_HI			452
+#define LAN8841_PTP_TX_EGRESS_NS_LO			451
+#define LAN8841_PTP_TX_EGRESS_NS_HI			450
+#define LAN8841_PTP_TX_EGRESS_NSEC_HI_VALID		BIT(15)
+#define LAN8841_PTP_TX_MSG_HEADER2			455
+
+static bool lan8841_ptp_get_tx_ts(struct kszphy_ptp_priv *ptp_priv,
+				  u32 *sec, u32 *nsec, u16 *seq)
+{
+	struct phy_device *phydev = ptp_priv->phydev;
+
+	*nsec = phy_read_mmd(phydev, 2, LAN8841_PTP_TX_EGRESS_NS_HI);
+	if (!(*nsec & LAN8841_PTP_TX_EGRESS_NSEC_HI_VALID))
+		return false;
+
+	*nsec = ((*nsec & 0x3fff) << 16);
+	*nsec = *nsec | phy_read_mmd(phydev, 2, LAN8841_PTP_TX_EGRESS_NS_LO);
+
+	*sec = phy_read_mmd(phydev, 2, LAN8841_PTP_TX_EGRESS_SEC_HI);
+	*sec = *sec << 16;
+	*sec = *sec | phy_read_mmd(phydev, 2, LAN8841_PTP_TX_EGRESS_SEC_LO);
+
+	*seq = phy_read_mmd(phydev, 2, LAN8841_PTP_TX_MSG_HEADER2);
+
+	return true;
+}
+
+static void lan8841_ptp_process_tx_ts(struct kszphy_ptp_priv *ptp_priv)
+{
+	u32 sec, nsec;
+	u16 seq;
+
+	while (lan8841_ptp_get_tx_ts(ptp_priv, &sec, &nsec, &seq))
+		lan8814_match_tx_skb(ptp_priv, sec, nsec, seq);
+}
+
+#define LAN8841_PTP_RX_INGRESS_SEC_LO			389
+#define LAN8841_PTP_RX_INGRESS_SEC_HI			388
+#define LAN8841_PTP_RX_INGRESS_NS_LO			387
+#define LAN8841_PTP_RX_INGRESS_NS_HI			386
+#define LAN8841_PTP_RX_INGRESS_NSEC_HI_VALID		BIT(15)
+#define LAN8841_PTP_RX_MSG_HEADER2			391
+
+static struct lan8814_ptp_rx_ts *lan8841_ptp_get_rx_ts(struct kszphy_ptp_priv *ptp_priv)
+{
+	struct phy_device *phydev = ptp_priv->phydev;
+	struct lan8814_ptp_rx_ts *rx_ts;
+	u32 sec, nsec;
+	u16 seq;
+
+	nsec = phy_read_mmd(phydev, 2, LAN8841_PTP_RX_INGRESS_NS_HI);
+	if (!(nsec & LAN8841_PTP_RX_INGRESS_NSEC_HI_VALID))
+		return NULL;
+
+	nsec = ((nsec & 0x3fff) << 16);
+	nsec = nsec | phy_read_mmd(phydev, 2, LAN8841_PTP_RX_INGRESS_NS_LO);
+
+	sec = phy_read_mmd(phydev, 2, LAN8841_PTP_RX_INGRESS_SEC_HI);
+	sec = sec << 16;
+	sec = sec | phy_read_mmd(phydev, 2, LAN8841_PTP_RX_INGRESS_SEC_LO);
+
+	seq = phy_read_mmd(phydev, 2, LAN8841_PTP_RX_MSG_HEADER2);
+
+	rx_ts = kzalloc(sizeof(*rx_ts), GFP_KERNEL);
+	if (!rx_ts)
+		return NULL;
+
+	rx_ts->seconds = sec;
+	rx_ts->nsec = nsec;
+	rx_ts->seq_id = seq;
+
+	return rx_ts;
+}
+
+static void lan8841_ptp_process_rx_ts(struct kszphy_ptp_priv *ptp_priv)
+{
+	struct lan8814_ptp_rx_ts *rx_ts;
+
+	while ((rx_ts = lan8841_ptp_get_rx_ts(ptp_priv)) != NULL)
+		lan8814_match_rx_ts(ptp_priv, rx_ts);
+}
+
+#define LAN8841_PTP_INT_STS			259
+#define LAN8841_PTP_INT_STS_PTP_TX_TS_OVRFL_INT	BIT(13)
+#define LAN8841_PTP_INT_STS_PTP_TX_TS_INT	BIT(12)
+#define LAN8841_PTP_INT_STS_PTP_RX_TS_OVRFL_INT	BIT(9)
+#define LAN8841_PTP_INT_STS_PTP_RX_TS_INT	BIT(8)
+
+static void lan8841_ptp_flush_fifo(struct kszphy_ptp_priv *ptp_priv, bool egress)
+{
+	struct phy_device *phydev = ptp_priv->phydev;
+	int i;
+
+	for (i = 0; i < FIFO_SIZE; ++i)
+		phy_read_mmd(phydev, 2,
+			     egress ? LAN8841_PTP_TX_MSG_HEADER2 :
+				      LAN8841_PTP_RX_MSG_HEADER2);
+
+	phy_read_mmd(phydev, 2, LAN8841_PTP_INT_STS);
+}
+
+static void lan8841_handle_ptp_interrupt(struct phy_device *phydev)
+{
+	struct kszphy_priv *priv = phydev->priv;
+	struct kszphy_ptp_priv *ptp_priv = &priv->ptp_priv;
+	u16 status;
+
+	do {
+		status = phy_read_mmd(phydev, 2, LAN8841_PTP_INT_STS);
+		if (status & LAN8841_PTP_INT_STS_PTP_TX_TS_INT)
+			lan8841_ptp_process_tx_ts(ptp_priv);
+
+		if (status & LAN8841_PTP_INT_STS_PTP_RX_TS_INT)
+			lan8841_ptp_process_rx_ts(ptp_priv);
+
+		if (status & LAN8841_PTP_INT_STS_PTP_TX_TS_OVRFL_INT) {
+			lan8841_ptp_flush_fifo(ptp_priv, true);
+			skb_queue_purge(&ptp_priv->tx_queue);
+		}
+
+		if (status & LAN8841_PTP_INT_STS_PTP_RX_TS_OVRFL_INT) {
+			lan8841_ptp_flush_fifo(ptp_priv, false);
+			skb_queue_purge(&ptp_priv->rx_queue);
+		}
+
+	} while (status);
+}
+
+#define LAN8841_INTS_PTP		BIT(9)
+
+static irqreturn_t lan8841_handle_interrupt(struct phy_device *phydev)
+{
+	irqreturn_t ret = IRQ_NONE;
+	int irq_status;
+
+	irq_status = phy_read(phydev, LAN8814_INTS);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	if (irq_status & LAN8814_INT_LINK) {
+		phy_trigger_machine(phydev);
+		ret = IRQ_HANDLED;
+	}
+
+	if (irq_status & LAN8841_INTS_PTP) {
+		lan8841_handle_ptp_interrupt(phydev);
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static int lan8841_ts_info(struct mii_timestamper *mii_ts,
+			   struct ethtool_ts_info *info)
+{
+	struct kszphy_ptp_priv *ptp_priv;
+
+	ptp_priv = container_of(mii_ts, struct kszphy_ptp_priv, mii_ts);
+
+	info->phc_index = ptp_priv->ptp_clock ?
+				ptp_clock_index(ptp_priv->ptp_clock) : -1;
+	if (info->phc_index == -1) {
+		info->so_timestamping |= SOF_TIMESTAMPING_TX_SOFTWARE |
+					 SOF_TIMESTAMPING_RX_SOFTWARE |
+					 SOF_TIMESTAMPING_SOFTWARE;
+		return 0;
+	}
+
+	info->so_timestamping = SOF_TIMESTAMPING_TX_HARDWARE |
+				SOF_TIMESTAMPING_RX_HARDWARE |
+				SOF_TIMESTAMPING_RAW_HARDWARE;
+
+	info->tx_types = (1 << HWTSTAMP_TX_OFF) |
+			 (1 << HWTSTAMP_TX_ON) |
+			 (1 << HWTSTAMP_TX_ONESTEP_SYNC);
+
+	info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) |
+			   (1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT) |
+			   (1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT) |
+			   (1 << HWTSTAMP_FILTER_PTP_V2_EVENT);
+
+	return 0;
+}
+
+#define LAN8841_PTP_INT_EN			260
+#define LAN8841_PTP_INT_EN_PTP_TX_TS_OVRFL_EN	BIT(13)
+#define LAN8841_PTP_INT_EN_PTP_TX_TS_EN		BIT(12)
+#define LAN8841_PTP_INT_EN_PTP_RX_TS_OVRFL_EN	BIT(9)
+#define LAN8841_PTP_INT_EN_PTP_RX_TS_EN		BIT(8)
+
+static void lan8841_ptp_enable_int(struct kszphy_ptp_priv *ptp_priv,
+				   bool enable)
+{
+	struct phy_device *phydev = ptp_priv->phydev;
+
+	if (enable)
+		/* Enable interrupts */
+		phy_modify_mmd(phydev, 2, LAN8841_PTP_INT_EN,
+			       LAN8841_PTP_INT_EN_PTP_TX_TS_OVRFL_EN |
+			       LAN8841_PTP_INT_EN_PTP_RX_TS_OVRFL_EN |
+			       LAN8841_PTP_INT_EN_PTP_TX_TS_EN |
+			       LAN8841_PTP_INT_EN_PTP_RX_TS_EN,
+			       LAN8841_PTP_INT_EN_PTP_TX_TS_OVRFL_EN |
+			       LAN8841_PTP_INT_EN_PTP_RX_TS_OVRFL_EN |
+			       LAN8841_PTP_INT_EN_PTP_TX_TS_EN |
+			       LAN8841_PTP_INT_EN_PTP_RX_TS_EN);
+	else
+		/* Disable interrupts */
+		phy_modify_mmd(phydev, 2, LAN8841_PTP_INT_EN,
+			       LAN8841_PTP_INT_EN_PTP_TX_TS_OVRFL_EN |
+			       LAN8841_PTP_INT_EN_PTP_RX_TS_OVRFL_EN |
+			       LAN8841_PTP_INT_EN_PTP_TX_TS_EN |
+			       LAN8841_PTP_INT_EN_PTP_RX_TS_EN, 0);
+}
+
+#define LAN8841_PTP_RX_TIMESTAMP_EN		379
+#define LAN8841_PTP_TX_TIMESTAMP_EN		443
+#define LAN8841_PTP_TX_MOD			445
+
+static int lan8841_hwtstamp(struct mii_timestamper *mii_ts, struct ifreq *ifr)
+{
+	struct kszphy_ptp_priv *ptp_priv = container_of(mii_ts, struct kszphy_ptp_priv, mii_ts);
+	struct phy_device *phydev = ptp_priv->phydev;
+	struct lan8814_ptp_rx_ts *rx_ts, *tmp;
+	struct hwtstamp_config config;
+	int txcfg = 0, rxcfg = 0;
+	int pkt_ts_enable;
+
+	if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
+		return -EFAULT;
+
+	ptp_priv->hwts_tx_type = config.tx_type;
+	ptp_priv->rx_filter = config.rx_filter;
+
+	switch (config.rx_filter) {
+	case HWTSTAMP_FILTER_NONE:
+		ptp_priv->layer = 0;
+		ptp_priv->version = 0;
+		break;
+	case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
+	case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
+		ptp_priv->layer = PTP_CLASS_L4;
+		ptp_priv->version = PTP_CLASS_V2;
+		break;
+	case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
+	case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
+		ptp_priv->layer = PTP_CLASS_L2;
+		ptp_priv->version = PTP_CLASS_V2;
+		break;
+	case HWTSTAMP_FILTER_PTP_V2_EVENT:
+	case HWTSTAMP_FILTER_PTP_V2_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+		ptp_priv->layer = PTP_CLASS_L4 | PTP_CLASS_L2;
+		ptp_priv->version = PTP_CLASS_V2;
+		break;
+	default:
+		return -ERANGE;
+	}
+
+	/* Setup parsing of the frames and enable the timestamping for ptp
+	 * frames
+	 */
+	if (ptp_priv->layer & PTP_CLASS_L2) {
+		rxcfg |= PTP_RX_PARSE_CONFIG_LAYER2_EN_;
+		txcfg |= PTP_TX_PARSE_CONFIG_LAYER2_EN_;
+	} else if (ptp_priv->layer & PTP_CLASS_L4) {
+		rxcfg |= PTP_RX_PARSE_CONFIG_IPV4_EN_ | PTP_RX_PARSE_CONFIG_IPV6_EN_;
+		txcfg |= PTP_TX_PARSE_CONFIG_IPV4_EN_ | PTP_TX_PARSE_CONFIG_IPV6_EN_;
+	}
+
+	phy_write_mmd(phydev, 2, LAN8841_PTP_RX_PARSE_CONFIG, rxcfg);
+	phy_write_mmd(phydev, 2, LAN8841_PTP_TX_PARSE_CONFIG, txcfg);
+
+	pkt_ts_enable = PTP_TIMESTAMP_EN_SYNC_ | PTP_TIMESTAMP_EN_DREQ_ |
+			PTP_TIMESTAMP_EN_PDREQ_ | PTP_TIMESTAMP_EN_PDRES_;
+	phy_write_mmd(phydev, 2, LAN8841_PTP_RX_TIMESTAMP_EN, pkt_ts_enable);
+	phy_write_mmd(phydev, 2, LAN8841_PTP_TX_TIMESTAMP_EN, pkt_ts_enable);
+
+	/* Enable / disable of the TX timestamp in the SYNC frames */
+	phy_modify_mmd(phydev, 2, LAN8841_PTP_TX_MOD,
+		       PTP_TX_MOD_TX_PTP_SYNC_TS_INSERT_,
+		       ptp_priv->hwts_tx_type == HWTSTAMP_TX_ONESTEP_SYNC ?
+				PTP_TX_MOD_TX_PTP_SYNC_TS_INSERT_ : 0);
+
+	/* Now enable/disable the timestamping */
+	lan8841_ptp_enable_int(ptp_priv,
+			       config.rx_filter != HWTSTAMP_FILTER_NONE);
+
+	/* In case of multiple starts and stops, these needs to be cleared */
+	list_for_each_entry_safe(rx_ts, tmp, &ptp_priv->rx_ts_list, list) {
+		list_del(&rx_ts->list);
+		kfree(rx_ts);
+	}
+
+	skb_queue_purge(&ptp_priv->rx_queue);
+	skb_queue_purge(&ptp_priv->tx_queue);
+
+	lan8841_ptp_flush_fifo(ptp_priv, false);
+	lan8841_ptp_flush_fifo(ptp_priv, true);
+
+	return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? -EFAULT : 0;
+}
+
+#define LAN8841_PTP_LTC_SET_SEC_HI	262
+#define LAN8841_PTP_LTC_SET_SEC_MID	263
+#define LAN8841_PTP_LTC_SET_SEC_LO	264
+#define LAN8841_PTP_LTC_SET_NS_HI	265
+#define LAN8841_PTP_LTC_SET_NS_LO	266
+#define LAN8841_PTP_CMD_CTL_PTP_LTC_LOAD	BIT(4)
+
+static int lan8841_ptp_settime64(struct ptp_clock_info *ptp,
+				 const struct timespec64 *ts)
+{
+	struct kszphy_ptp_priv *ptp_priv = container_of(ptp, struct kszphy_ptp_priv,
+							ptp_clock_info);
+	struct phy_device *phydev = ptp_priv->phydev;
+
+	/* Set the value to be stored */
+	mutex_lock(&ptp_priv->ptp_lock);
+	phy_write_mmd(phydev, 2, LAN8841_PTP_LTC_SET_SEC_LO, lower_16_bits(ts->tv_sec));
+	phy_write_mmd(phydev, 2, LAN8841_PTP_LTC_SET_SEC_MID, upper_16_bits(ts->tv_sec));
+	phy_write_mmd(phydev, 2, LAN8841_PTP_LTC_SET_SEC_HI, upper_32_bits(ts->tv_sec) & 0xffff);
+	phy_write_mmd(phydev, 2, LAN8841_PTP_LTC_SET_NS_LO, lower_16_bits(ts->tv_nsec));
+	phy_write_mmd(phydev, 2, LAN8841_PTP_LTC_SET_NS_HI, upper_16_bits(ts->tv_nsec) & 0x3fff);
+
+	/* Set the command to load the LTC */
+	phy_write_mmd(phydev, 2, LAN8841_PTP_CMD_CTL,
+		      LAN8841_PTP_CMD_CTL_PTP_LTC_LOAD);
+	mutex_unlock(&ptp_priv->ptp_lock);
+
+	return 0;
+}
+
+#define LAN8841_PTP_LTC_RD_SEC_HI	358
+#define LAN8841_PTP_LTC_RD_SEC_MID	359
+#define LAN8841_PTP_LTC_RD_SEC_LO	360
+#define LAN8841_PTP_LTC_RD_NS_HI	361
+#define LAN8841_PTP_LTC_RD_NS_LO	362
+#define LAN8841_PTP_CMD_CTL_PTP_LTC_READ	BIT(3)
+
+static int lan8841_ptp_gettime64(struct ptp_clock_info *ptp,
+				 struct timespec64 *ts)
+{
+	struct kszphy_ptp_priv *ptp_priv = container_of(ptp, struct kszphy_ptp_priv,
+							ptp_clock_info);
+	struct phy_device *phydev = ptp_priv->phydev;
+	time64_t s;
+	s64 ns;
+
+	mutex_lock(&ptp_priv->ptp_lock);
+	/* Issue the command to read the LTC */
+	phy_write_mmd(phydev, 2, LAN8841_PTP_CMD_CTL,
+		      LAN8841_PTP_CMD_CTL_PTP_LTC_READ);
+
+	/* Read the LTC */
+	s = phy_read_mmd(phydev, 2, LAN8841_PTP_LTC_RD_SEC_HI);
+	s <<= 16;
+	s |= phy_read_mmd(phydev, 2, LAN8841_PTP_LTC_RD_SEC_MID);
+	s <<= 16;
+	s |= phy_read_mmd(phydev, 2, LAN8841_PTP_LTC_RD_SEC_LO);
+
+	ns = phy_read_mmd(phydev, 2, LAN8841_PTP_LTC_RD_NS_HI) & 0x3fff;
+	ns <<= 16;
+	ns |= phy_read_mmd(phydev, 2, LAN8841_PTP_LTC_RD_NS_LO);
+	mutex_unlock(&ptp_priv->ptp_lock);
+
+	set_normalized_timespec64(ts, s, ns);
+	return 0;
+}
+
+#define LAN8841_PTP_LTC_STEP_ADJ_LO			276
+#define LAN8841_PTP_LTC_STEP_ADJ_HI			275
+#define LAN8841_PTP_LTC_STEP_ADJ_DIR			BIT(15)
+#define LAN8841_PTP_CMD_CTL_PTP_LTC_STEP_SECONDS	BIT(5)
+#define LAN8841_PTP_CMD_CTL_PTP_LTC_STEP_NANOSECONDS	BIT(6)
+
+static int lan8841_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
+{
+	struct kszphy_ptp_priv *ptp_priv = container_of(ptp, struct kszphy_ptp_priv,
+							ptp_clock_info);
+	struct phy_device *phydev = ptp_priv->phydev;
+	struct timespec64 ts;
+	bool add = true;
+	u32 nsec;
+	s32 sec;
+
+	/* The HW allows up to 15 sec to adjust the time, but here we limit to
+	 * 10 sec the adjustment. The reason is, in case the adjustment is 14
+	 * sec and 999999999 nsec, then we add 8ns to compansate the actual
+	 * increment so the value can be bigger than 15 sec. Therefore limit the
+	 * possible adjustments so we will not have these corner cases
+	 */
+	if (delta > 10000000000LL || delta < -10000000000LL) {
+		/* The timeadjustment is too big, so fall back using set time */
+		u64 now;
+
+		ptp->gettime64(ptp, &ts);
+
+		now = ktime_to_ns(timespec64_to_ktime(ts));
+		ts = ns_to_timespec64(now + delta);
+
+		ptp->settime64(ptp, &ts);
+		return 0;
+	}
+
+	sec = div_u64_rem(delta < 0 ? -delta : delta, NSEC_PER_SEC, &nsec);
+	if (delta < 0 && nsec != 0) {
+		/* It is not allowed to adjust low the nsec part, therefore
+		 * subtract more from second part and add to nanosecond such
+		 * that would roll over, so the second part will increase
+		 */
+		sec--;
+		nsec = NSEC_PER_SEC - nsec;
+	}
+
+	/* Calculate the adjustments and the direction */
+	if (delta < 0)
+		add = false;
+
+	if (nsec > 0)
+		/* add 8 ns to cover the likely normal increment */
+		nsec += 8;
+
+	if (nsec >= NSEC_PER_SEC) {
+		/* carry into seconds */
+		sec++;
+		nsec -= NSEC_PER_SEC;
+	}
+
+	mutex_lock(&ptp_priv->ptp_lock);
+	if (sec) {
+		phy_write_mmd(phydev, 2, LAN8841_PTP_LTC_STEP_ADJ_LO, sec);
+		phy_write_mmd(phydev, 2, LAN8841_PTP_LTC_STEP_ADJ_HI,
+			      add ? LAN8841_PTP_LTC_STEP_ADJ_DIR : 0);
+		phy_write_mmd(phydev, 2, LAN8841_PTP_CMD_CTL,
+			      LAN8841_PTP_CMD_CTL_PTP_LTC_STEP_SECONDS);
+	}
+
+	if (nsec) {
+		phy_write_mmd(phydev, 2, LAN8841_PTP_LTC_STEP_ADJ_LO,
+			      nsec & 0xffff);
+		phy_write_mmd(phydev, 2, LAN8841_PTP_LTC_STEP_ADJ_HI,
+			      (nsec >> 16) & 0x3fff);
+		phy_write_mmd(phydev, 2, LAN8841_PTP_CMD_CTL,
+			      LAN8841_PTP_CMD_CTL_PTP_LTC_STEP_NANOSECONDS);
+	}
+	mutex_unlock(&ptp_priv->ptp_lock);
+
+	return 0;
+}
+
+#define LAN8841_PTP_LTC_RATE_ADJ_HI		269
+#define LAN8841_PTP_LTC_RATE_ADJ_HI_DIR		BIT(15)
+#define LAN8841_PTP_LTC_RATE_ADJ_LO		270
+
+static int lan8841_ptp_adjfine(struct ptp_clock_info *ptp, long scaled_ppm)
+{
+	struct kszphy_ptp_priv *ptp_priv = container_of(ptp, struct kszphy_ptp_priv,
+							ptp_clock_info);
+	struct phy_device *phydev = ptp_priv->phydev;
+	bool faster = true;
+	u32 rate;
+
+	if (!scaled_ppm)
+		return 0;
+
+	if (scaled_ppm < 0) {
+		scaled_ppm = -scaled_ppm;
+		faster = false;
+	}
+
+	rate = LAN8814_1PPM_FORMAT * (upper_16_bits(scaled_ppm));
+	rate += (LAN8814_1PPM_FORMAT * (lower_16_bits(scaled_ppm))) >> 16;
+
+	mutex_lock(&ptp_priv->ptp_lock);
+	phy_write_mmd(phydev, 2, LAN8841_PTP_LTC_RATE_ADJ_HI,
+		      faster ? LAN8841_PTP_LTC_RATE_ADJ_HI_DIR | (upper_16_bits(rate) & 0x3fff)
+			     : upper_16_bits(rate) & 0x3fff);
+	phy_write_mmd(phydev, 2, LAN8841_PTP_LTC_RATE_ADJ_LO, lower_16_bits(rate));
+	mutex_unlock(&ptp_priv->ptp_lock);
+
+	return 0;
+}
+
+static struct ptp_clock_info lan8841_ptp_clock_info = {
+	.owner		= THIS_MODULE,
+	.name		= "lan8841 ptp",
+	.max_adj	= 31249999,
+	.gettime64	= lan8841_ptp_gettime64,
+	.settime64	= lan8841_ptp_settime64,
+	.adjtime	= lan8841_ptp_adjtime,
+	.adjfine	= lan8841_ptp_adjfine,
+};
+
+#define LAN8841_OPERATION_MODE_STRAP_LOW_REGISTER 3
+#define LAN8841_OPERATION_MODE_STRAP_LOW_REGISTER_STRAP_RGMII_EN BIT(0)
+
+static int lan8841_probe(struct phy_device *phydev)
+{
+	struct kszphy_ptp_priv *ptp_priv;
+	struct kszphy_priv *priv;
+	int err;
+
+	err = kszphy_probe(phydev);
+	if (err)
+		return err;
+
+	if (phy_read_mmd(phydev, KSZ9131RN_MMD_COMMON_CTRL_REG,
+			 LAN8841_OPERATION_MODE_STRAP_LOW_REGISTER) &
+	    LAN8841_OPERATION_MODE_STRAP_LOW_REGISTER_STRAP_RGMII_EN)
+		phydev->interface = PHY_INTERFACE_MODE_RGMII_RXID;
+
+	/* Register the clock */
+	if (!IS_ENABLED(CONFIG_NETWORK_PHY_TIMESTAMPING))
+		return 0;
+
+	priv = phydev->priv;
+	ptp_priv = &priv->ptp_priv;
+
+	ptp_priv->ptp_clock_info = lan8841_ptp_clock_info;
+	ptp_priv->ptp_clock = ptp_clock_register(&ptp_priv->ptp_clock_info,
+						 &phydev->mdio.dev);
+	if (IS_ERR(ptp_priv->ptp_clock)) {
+		phydev_err(phydev, "ptp_clock_register failed: %lu\n",
+			   PTR_ERR(ptp_priv->ptp_clock));
+		return -EINVAL;
+	}
+
+	if (!ptp_priv->ptp_clock)
+		return 0;
+
+	/* Initialize the SW */
+	skb_queue_head_init(&ptp_priv->tx_queue);
+	skb_queue_head_init(&ptp_priv->rx_queue);
+	INIT_LIST_HEAD(&ptp_priv->rx_ts_list);
+	spin_lock_init(&ptp_priv->rx_ts_lock);
+	ptp_priv->phydev = phydev;
+	mutex_init(&ptp_priv->ptp_lock);
+
+	ptp_priv->mii_ts.rxtstamp = lan8814_rxtstamp;
+	ptp_priv->mii_ts.txtstamp = lan8814_txtstamp;
+	ptp_priv->mii_ts.hwtstamp = lan8841_hwtstamp;
+	ptp_priv->mii_ts.ts_info = lan8841_ts_info;
+
+	phydev->mii_ts = &ptp_priv->mii_ts;
+
+	return 0;
+}
+
+static struct phy_driver ksphy_driver[] = {
+{
+	.phy_id		= PHY_ID_KS8737,
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.name		= "Micrel KS8737",
+	/* PHY_BASIC_FEATURES */
+	.driver_data	= &ks8737_type,
+	.probe		= kszphy_probe,
+	.config_init	= kszphy_config_init,
+	.config_intr	= kszphy_config_intr,
+	.handle_interrupt = kszphy_handle_interrupt,
+	.suspend	= kszphy_suspend,
+	.resume		= kszphy_resume,
+}, {
+	.phy_id		= PHY_ID_KSZ8021,
+	.phy_id_mask	= 0x00ffffff,
+	.name		= "Micrel KSZ8021 or KSZ8031",
+	/* PHY_BASIC_FEATURES */
+	.driver_data	= &ksz8021_type,
+	.probe		= kszphy_probe,
+	.config_init	= kszphy_config_init,
+	.config_intr	= kszphy_config_intr,
+	.handle_interrupt = kszphy_handle_interrupt,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	.suspend	= kszphy_suspend,
+	.resume		= kszphy_resume,
+}, {
+	.phy_id		= PHY_ID_KSZ8031,
+	.phy_id_mask	= 0x00ffffff,
+	.name		= "Micrel KSZ8031",
+	/* PHY_BASIC_FEATURES */
+	.driver_data	= &ksz8021_type,
+	.probe		= kszphy_probe,
+	.config_init	= kszphy_config_init,
+	.config_intr	= kszphy_config_intr,
+	.handle_interrupt = kszphy_handle_interrupt,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	.suspend	= kszphy_suspend,
+	.resume		= kszphy_resume,
+}, {
+	.phy_id		= PHY_ID_KSZ8041,
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.name		= "Micrel KSZ8041",
+	/* PHY_BASIC_FEATURES */
+	.driver_data	= &ksz8041_type,
+	.probe		= kszphy_probe,
+	.config_init	= ksz8041_config_init,
+	.config_aneg	= ksz8041_config_aneg,
+	.config_intr	= kszphy_config_intr,
+	.handle_interrupt = kszphy_handle_interrupt,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	/* No suspend/resume callbacks because of errata DS80000700A,
+	 * receiver error following software power down.
+	 */
+}, {
+	.phy_id		= PHY_ID_KSZ8041RNLI,
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.name		= "Micrel KSZ8041RNLI",
+	/* PHY_BASIC_FEATURES */
+	.driver_data	= &ksz8041_type,
+	.probe		= kszphy_probe,
+	.config_init	= kszphy_config_init,
+	.config_intr	= kszphy_config_intr,
+	.handle_interrupt = kszphy_handle_interrupt,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	.suspend	= kszphy_suspend,
+	.resume		= kszphy_resume,
+}, {
+	.name		= "Micrel KSZ8051",
+	/* PHY_BASIC_FEATURES */
+	.driver_data	= &ksz8051_type,
+	.probe		= kszphy_probe,
+	.config_init	= kszphy_config_init,
+	.config_intr	= kszphy_config_intr,
+	.handle_interrupt = kszphy_handle_interrupt,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	.match_phy_device = ksz8051_match_phy_device,
+	.suspend	= kszphy_suspend,
+	.resume		= kszphy_resume,
+}, {
+	.phy_id		= PHY_ID_KSZ8001,
+	.name		= "Micrel KSZ8001 or KS8721",
+	.phy_id_mask	= 0x00fffffc,
+	/* PHY_BASIC_FEATURES */
+	.driver_data	= &ksz8041_type,
+	.probe		= kszphy_probe,
+	.config_init	= kszphy_config_init,
+	.config_intr	= kszphy_config_intr,
+	.handle_interrupt = kszphy_handle_interrupt,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	.suspend	= kszphy_suspend,
+	.resume		= kszphy_resume,
+}, {
+	.phy_id		= PHY_ID_KSZ8081,
+	.name		= "Micrel KSZ8081 or KSZ8091",
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.flags		= PHY_POLL_CABLE_TEST,
+	/* PHY_BASIC_FEATURES */
+	.driver_data	= &ksz8081_type,
+	.probe		= kszphy_probe,
+	.config_init	= ksz8081_config_init,
+	.soft_reset	= genphy_soft_reset,
+	.config_aneg	= ksz8081_config_aneg,
+	.read_status	= ksz8081_read_status,
+	.config_intr	= kszphy_config_intr,
+	.handle_interrupt = kszphy_handle_interrupt,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	.suspend	= kszphy_suspend,
+	.resume		= kszphy_resume,
+	.cable_test_start	= ksz886x_cable_test_start,
+	.cable_test_get_status	= ksz886x_cable_test_get_status,
+}, {
+	.phy_id		= PHY_ID_KSZ8061,
+	.name		= "Micrel KSZ8061",
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	/* PHY_BASIC_FEATURES */
+	.probe		= kszphy_probe,
+	.config_init	= ksz8061_config_init,
+	.config_intr	= kszphy_config_intr,
+	.handle_interrupt = kszphy_handle_interrupt,
+	.suspend	= kszphy_suspend,
+	.resume		= kszphy_resume,
+}, {
+	.phy_id		= PHY_ID_KSZ9021,
+	.phy_id_mask	= 0x000ffffe,
+	.name		= "Micrel KSZ9021 Gigabit PHY",
+	/* PHY_GBIT_FEATURES */
+	.driver_data	= &ksz9021_type,
+	.probe		= kszphy_probe,
+	.get_features	= ksz9031_get_features,
+	.config_init	= ksz9021_config_init,
+	.config_intr	= kszphy_config_intr,
+	.handle_interrupt = kszphy_handle_interrupt,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	.suspend	= kszphy_suspend,
+	.resume		= kszphy_resume,
+	.read_mmd	= genphy_read_mmd_unsupported,
+	.write_mmd	= genphy_write_mmd_unsupported,
+}, {
+	.phy_id		= PHY_ID_KSZ9031,
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.name		= "Micrel KSZ9031 Gigabit PHY",
+	.flags		= PHY_POLL_CABLE_TEST,
+	.driver_data	= &ksz9021_type,
+	.probe		= kszphy_probe,
+	.get_features	= ksz9031_get_features,
+	.config_init	= ksz9031_config_init,
+	.soft_reset	= genphy_soft_reset,
+	.read_status	= ksz9031_read_status,
+	.config_intr	= kszphy_config_intr,
+	.handle_interrupt = kszphy_handle_interrupt,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	.suspend	= kszphy_suspend,
+	.resume		= kszphy_resume,
+	.cable_test_start	= ksz9x31_cable_test_start,
+	.cable_test_get_status	= ksz9x31_cable_test_get_status,
+}, {
+	.phy_id		= PHY_ID_LAN8814,
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.name		= "Microchip INDY Gigabit Quad PHY",
+	.flags          = PHY_POLL_CABLE_TEST,
+	.config_init	= lan8814_config_init,
+	.driver_data	= &lan8814_type,
+	.probe		= lan8814_probe,
+	.soft_reset	= genphy_soft_reset,
+	.read_status	= ksz9031_read_status,
+	.get_sset_count	= kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	.suspend	= genphy_suspend,
+	.resume		= kszphy_resume,
+	.config_intr	= lan8814_config_intr,
+	.handle_interrupt = lan8814_handle_interrupt,
+	.cable_test_start	= lan8814_cable_test_start,
+	.cable_test_get_status	= ksz886x_cable_test_get_status,
+}, {
+	.phy_id		= PHY_ID_LAN8804,
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.name		= "Microchip LAN966X Gigabit PHY",
+	.config_init	= lan8804_config_init,
+	.driver_data	= &ksz9021_type,
+	.probe		= kszphy_probe,
+	.soft_reset	= genphy_soft_reset,
+	.read_status	= ksz9031_read_status,
+	.get_sset_count	= kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	.suspend	= genphy_suspend,
+	.resume		= kszphy_resume,
+	.config_intr	= lan8804_config_intr,
+	.handle_interrupt = lan8804_handle_interrupt,
+}, {
+	.phy_id		= PHY_ID_LAN8841,
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.name		= "Microchip LAN8841 Gigabit PHY",
+	.flags		= PHY_POLL_CABLE_TEST,
+	.driver_data	= &lan8841_type,
+	.config_init	= lan8841_config_init,
+	.probe		= lan8841_probe,
+	.soft_reset	= genphy_soft_reset,
+	.config_intr	= lan8841_config_intr,
+	.handle_interrupt = lan8841_handle_interrupt,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+	.cable_test_start	= lan8814_cable_test_start,
+	.cable_test_get_status	= ksz886x_cable_test_get_status,
+}, {
+	.phy_id		= PHY_ID_KSZ9131,
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.name		= "Microchip KSZ9131 Gigabit PHY",
+	/* PHY_GBIT_FEATURES */
+	.flags		= PHY_POLL_CABLE_TEST,
+	.driver_data	= &ksz9131_type,
+	.probe		= kszphy_probe,
+	.config_init	= ksz9131_config_init,
+	.config_intr	= kszphy_config_intr,
+	.config_aneg	= ksz9131_config_aneg,
+	.read_status	= ksz9131_read_status,
+	.handle_interrupt = kszphy_handle_interrupt,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	.suspend	= kszphy_suspend,
+	.resume		= kszphy_resume,
+	.cable_test_start	= ksz9x31_cable_test_start,
+	.cable_test_get_status	= ksz9x31_cable_test_get_status,
+}, {
+	.phy_id		= PHY_ID_KSZ8873MLL,
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.name		= "Micrel KSZ8873MLL Switch",
+	/* PHY_BASIC_FEATURES */
+	.config_init	= kszphy_config_init,
+	.config_aneg	= ksz8873mll_config_aneg,
+	.read_status	= ksz8873mll_read_status,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+}, {
+	.phy_id		= PHY_ID_KSZ886X,
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.name		= "Micrel KSZ8851 Ethernet MAC or KSZ886X Switch",
+	.driver_data	= &ksz886x_type,
+	/* PHY_BASIC_FEATURES */
+	.flags		= PHY_POLL_CABLE_TEST,
+	.config_init	= kszphy_config_init,
+	.config_aneg	= ksz886x_config_aneg,
+	.read_status	= ksz886x_read_status,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+	.cable_test_start	= ksz886x_cable_test_start,
+	.cable_test_get_status	= ksz886x_cable_test_get_status,
+}, {
+	.name		= "Micrel KSZ87XX Switch",
+	/* PHY_BASIC_FEATURES */
+	.config_init	= kszphy_config_init,
+	.match_phy_device = ksz8795_match_phy_device,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+}, {
+	.phy_id		= PHY_ID_KSZ9477,
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.name		= "Microchip KSZ9477",
+	/* PHY_GBIT_FEATURES */
+	.config_init	= kszphy_config_init,
+	.config_intr	= kszphy_config_intr,
+	.handle_interrupt = kszphy_handle_interrupt,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+	.get_features	= ksz9477_get_features,
+} };
+
+module_phy_driver(ksphy_driver);
+
+MODULE_DESCRIPTION("Micrel PHY driver");
+MODULE_AUTHOR("David J. Choi");
+MODULE_LICENSE("GPL");
+
+static struct mdio_device_id __maybe_unused micrel_tbl[] = {
+	{ PHY_ID_KSZ9021, 0x000ffffe },
+	{ PHY_ID_KSZ9031, MICREL_PHY_ID_MASK },
+	{ PHY_ID_KSZ9131, MICREL_PHY_ID_MASK },
+	{ PHY_ID_KSZ8001, 0x00fffffc },
+	{ PHY_ID_KS8737, MICREL_PHY_ID_MASK },
+	{ PHY_ID_KSZ8021, 0x00ffffff },
+	{ PHY_ID_KSZ8031, 0x00ffffff },
+	{ PHY_ID_KSZ8041, MICREL_PHY_ID_MASK },
+	{ PHY_ID_KSZ8051, MICREL_PHY_ID_MASK },
+	{ PHY_ID_KSZ8061, MICREL_PHY_ID_MASK },
+	{ PHY_ID_KSZ8081, MICREL_PHY_ID_MASK },
+	{ PHY_ID_KSZ8873MLL, MICREL_PHY_ID_MASK },
+	{ PHY_ID_KSZ886X, MICREL_PHY_ID_MASK },
+	{ PHY_ID_LAN8814, MICREL_PHY_ID_MASK },
+	{ PHY_ID_LAN8804, MICREL_PHY_ID_MASK },
+	{ PHY_ID_LAN8841, MICREL_PHY_ID_MASK },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, micrel_tbl);