Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1011 insertions, 0 deletions

diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
new file mode 100644
index 000000000..a64186dc5
--- /dev/null
+++ b/drivers/net/phy/phy-core.c
@@ -0,0 +1,1011 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Core PHY library, taken from phy.c
+ */
+#include <linux/export.h>
+#include <linux/phy.h>
+#include <linux/of.h>
+
+/**
+ * phy_speed_to_str - Return a string representing the PHY link speed
+ *
+ * @speed: Speed of the link
+ */
+const char *phy_speed_to_str(int speed)
+{
+	BUILD_BUG_ON_MSG(__ETHTOOL_LINK_MODE_MASK_NBITS != 102,
+		"Enum ethtool_link_mode_bit_indices and phylib are out of sync. "
+		"If a speed or mode has been added please update phy_speed_to_str "
+		"and the PHY settings array.\n");
+
+	switch (speed) {
+	case SPEED_10:
+		return "10Mbps";
+	case SPEED_100:
+		return "100Mbps";
+	case SPEED_1000:
+		return "1Gbps";
+	case SPEED_2500:
+		return "2.5Gbps";
+	case SPEED_5000:
+		return "5Gbps";
+	case SPEED_10000:
+		return "10Gbps";
+	case SPEED_14000:
+		return "14Gbps";
+	case SPEED_20000:
+		return "20Gbps";
+	case SPEED_25000:
+		return "25Gbps";
+	case SPEED_40000:
+		return "40Gbps";
+	case SPEED_50000:
+		return "50Gbps";
+	case SPEED_56000:
+		return "56Gbps";
+	case SPEED_100000:
+		return "100Gbps";
+	case SPEED_200000:
+		return "200Gbps";
+	case SPEED_400000:
+		return "400Gbps";
+	case SPEED_800000:
+		return "800Gbps";
+	case SPEED_UNKNOWN:
+		return "Unknown";
+	default:
+		return "Unsupported (update phy-core.c)";
+	}
+}
+EXPORT_SYMBOL_GPL(phy_speed_to_str);
+
+/**
+ * phy_duplex_to_str - Return string describing the duplex
+ *
+ * @duplex: Duplex setting to describe
+ */
+const char *phy_duplex_to_str(unsigned int duplex)
+{
+	if (duplex == DUPLEX_HALF)
+		return "Half";
+	if (duplex == DUPLEX_FULL)
+		return "Full";
+	if (duplex == DUPLEX_UNKNOWN)
+		return "Unknown";
+	return "Unsupported (update phy-core.c)";
+}
+EXPORT_SYMBOL_GPL(phy_duplex_to_str);
+
+/**
+ * phy_rate_matching_to_str - Return a string describing the rate matching
+ *
+ * @rate_matching: Type of rate matching to describe
+ */
+const char *phy_rate_matching_to_str(int rate_matching)
+{
+	switch (rate_matching) {
+	case RATE_MATCH_NONE:
+		return "none";
+	case RATE_MATCH_PAUSE:
+		return "pause";
+	case RATE_MATCH_CRS:
+		return "crs";
+	case RATE_MATCH_OPEN_LOOP:
+		return "open-loop";
+	}
+	return "Unsupported (update phy-core.c)";
+}
+EXPORT_SYMBOL_GPL(phy_rate_matching_to_str);
+
+/**
+ * phy_interface_num_ports - Return the number of links that can be carried by
+ *			     a given MAC-PHY physical link. Returns 0 if this is
+ *			     unknown, the number of links else.
+ *
+ * @interface: The interface mode we want to get the number of ports
+ */
+int phy_interface_num_ports(phy_interface_t interface)
+{
+	switch (interface) {
+	case PHY_INTERFACE_MODE_NA:
+		return 0;
+	case PHY_INTERFACE_MODE_INTERNAL:
+	case PHY_INTERFACE_MODE_MII:
+	case PHY_INTERFACE_MODE_GMII:
+	case PHY_INTERFACE_MODE_TBI:
+	case PHY_INTERFACE_MODE_REVMII:
+	case PHY_INTERFACE_MODE_RMII:
+	case PHY_INTERFACE_MODE_REVRMII:
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+	case PHY_INTERFACE_MODE_RTBI:
+	case PHY_INTERFACE_MODE_XGMII:
+	case PHY_INTERFACE_MODE_XLGMII:
+	case PHY_INTERFACE_MODE_MOCA:
+	case PHY_INTERFACE_MODE_TRGMII:
+	case PHY_INTERFACE_MODE_USXGMII:
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_SMII:
+	case PHY_INTERFACE_MODE_1000BASEX:
+	case PHY_INTERFACE_MODE_2500BASEX:
+	case PHY_INTERFACE_MODE_5GBASER:
+	case PHY_INTERFACE_MODE_10GBASER:
+	case PHY_INTERFACE_MODE_25GBASER:
+	case PHY_INTERFACE_MODE_10GKR:
+	case PHY_INTERFACE_MODE_100BASEX:
+	case PHY_INTERFACE_MODE_RXAUI:
+	case PHY_INTERFACE_MODE_XAUI:
+	case PHY_INTERFACE_MODE_1000BASEKX:
+		return 1;
+	case PHY_INTERFACE_MODE_QSGMII:
+	case PHY_INTERFACE_MODE_QUSGMII:
+		return 4;
+	case PHY_INTERFACE_MODE_MAX:
+		WARN_ONCE(1, "PHY_INTERFACE_MODE_MAX isn't a valid interface mode");
+		return 0;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(phy_interface_num_ports);
+
+/* A mapping of all SUPPORTED settings to speed/duplex.  This table
+ * must be grouped by speed and sorted in descending match priority
+ * - iow, descending speed.
+ */
+
+#define PHY_SETTING(s, d, b) { .speed = SPEED_ ## s, .duplex = DUPLEX_ ## d, \
+			       .bit = ETHTOOL_LINK_MODE_ ## b ## _BIT}
+
+static const struct phy_setting settings[] = {
+	/* 800G */
+	PHY_SETTING( 800000, FULL, 800000baseCR8_Full		),
+	PHY_SETTING( 800000, FULL, 800000baseKR8_Full		),
+	PHY_SETTING( 800000, FULL, 800000baseDR8_Full		),
+	PHY_SETTING( 800000, FULL, 800000baseDR8_2_Full		),
+	PHY_SETTING( 800000, FULL, 800000baseSR8_Full		),
+	PHY_SETTING( 800000, FULL, 800000baseVR8_Full		),
+	/* 400G */
+	PHY_SETTING( 400000, FULL, 400000baseCR8_Full		),
+	PHY_SETTING( 400000, FULL, 400000baseKR8_Full		),
+	PHY_SETTING( 400000, FULL, 400000baseLR8_ER8_FR8_Full	),
+	PHY_SETTING( 400000, FULL, 400000baseDR8_Full		),
+	PHY_SETTING( 400000, FULL, 400000baseSR8_Full		),
+	PHY_SETTING( 400000, FULL, 400000baseCR4_Full		),
+	PHY_SETTING( 400000, FULL, 400000baseKR4_Full		),
+	PHY_SETTING( 400000, FULL, 400000baseLR4_ER4_FR4_Full	),
+	PHY_SETTING( 400000, FULL, 400000baseDR4_Full		),
+	PHY_SETTING( 400000, FULL, 400000baseSR4_Full		),
+	/* 200G */
+	PHY_SETTING( 200000, FULL, 200000baseCR4_Full		),
+	PHY_SETTING( 200000, FULL, 200000baseKR4_Full		),
+	PHY_SETTING( 200000, FULL, 200000baseLR4_ER4_FR4_Full	),
+	PHY_SETTING( 200000, FULL, 200000baseDR4_Full		),
+	PHY_SETTING( 200000, FULL, 200000baseSR4_Full		),
+	PHY_SETTING( 200000, FULL, 200000baseCR2_Full		),
+	PHY_SETTING( 200000, FULL, 200000baseKR2_Full		),
+	PHY_SETTING( 200000, FULL, 200000baseLR2_ER2_FR2_Full	),
+	PHY_SETTING( 200000, FULL, 200000baseDR2_Full		),
+	PHY_SETTING( 200000, FULL, 200000baseSR2_Full		),
+	/* 100G */
+	PHY_SETTING( 100000, FULL, 100000baseCR4_Full		),
+	PHY_SETTING( 100000, FULL, 100000baseKR4_Full		),
+	PHY_SETTING( 100000, FULL, 100000baseLR4_ER4_Full	),
+	PHY_SETTING( 100000, FULL, 100000baseSR4_Full		),
+	PHY_SETTING( 100000, FULL, 100000baseCR2_Full		),
+	PHY_SETTING( 100000, FULL, 100000baseKR2_Full		),
+	PHY_SETTING( 100000, FULL, 100000baseLR2_ER2_FR2_Full	),
+	PHY_SETTING( 100000, FULL, 100000baseDR2_Full		),
+	PHY_SETTING( 100000, FULL, 100000baseSR2_Full		),
+	PHY_SETTING( 100000, FULL, 100000baseCR_Full		),
+	PHY_SETTING( 100000, FULL, 100000baseKR_Full		),
+	PHY_SETTING( 100000, FULL, 100000baseLR_ER_FR_Full	),
+	PHY_SETTING( 100000, FULL, 100000baseDR_Full		),
+	PHY_SETTING( 100000, FULL, 100000baseSR_Full		),
+	/* 56G */
+	PHY_SETTING(  56000, FULL,  56000baseCR4_Full	  	),
+	PHY_SETTING(  56000, FULL,  56000baseKR4_Full	  	),
+	PHY_SETTING(  56000, FULL,  56000baseLR4_Full	  	),
+	PHY_SETTING(  56000, FULL,  56000baseSR4_Full	  	),
+	/* 50G */
+	PHY_SETTING(  50000, FULL,  50000baseCR2_Full		),
+	PHY_SETTING(  50000, FULL,  50000baseKR2_Full		),
+	PHY_SETTING(  50000, FULL,  50000baseSR2_Full		),
+	PHY_SETTING(  50000, FULL,  50000baseCR_Full		),
+	PHY_SETTING(  50000, FULL,  50000baseKR_Full		),
+	PHY_SETTING(  50000, FULL,  50000baseLR_ER_FR_Full	),
+	PHY_SETTING(  50000, FULL,  50000baseDR_Full		),
+	PHY_SETTING(  50000, FULL,  50000baseSR_Full		),
+	/* 40G */
+	PHY_SETTING(  40000, FULL,  40000baseCR4_Full		),
+	PHY_SETTING(  40000, FULL,  40000baseKR4_Full		),
+	PHY_SETTING(  40000, FULL,  40000baseLR4_Full		),
+	PHY_SETTING(  40000, FULL,  40000baseSR4_Full		),
+	/* 25G */
+	PHY_SETTING(  25000, FULL,  25000baseCR_Full		),
+	PHY_SETTING(  25000, FULL,  25000baseKR_Full		),
+	PHY_SETTING(  25000, FULL,  25000baseSR_Full		),
+	/* 20G */
+	PHY_SETTING(  20000, FULL,  20000baseKR2_Full		),
+	PHY_SETTING(  20000, FULL,  20000baseMLD2_Full		),
+	/* 10G */
+	PHY_SETTING(  10000, FULL,  10000baseCR_Full		),
+	PHY_SETTING(  10000, FULL,  10000baseER_Full		),
+	PHY_SETTING(  10000, FULL,  10000baseKR_Full		),
+	PHY_SETTING(  10000, FULL,  10000baseKX4_Full		),
+	PHY_SETTING(  10000, FULL,  10000baseLR_Full		),
+	PHY_SETTING(  10000, FULL,  10000baseLRM_Full		),
+	PHY_SETTING(  10000, FULL,  10000baseR_FEC		),
+	PHY_SETTING(  10000, FULL,  10000baseSR_Full		),
+	PHY_SETTING(  10000, FULL,  10000baseT_Full		),
+	/* 5G */
+	PHY_SETTING(   5000, FULL,   5000baseT_Full		),
+	/* 2.5G */
+	PHY_SETTING(   2500, FULL,   2500baseT_Full		),
+	PHY_SETTING(   2500, FULL,   2500baseX_Full		),
+	/* 1G */
+	PHY_SETTING(   1000, FULL,   1000baseT_Full		),
+	PHY_SETTING(   1000, HALF,   1000baseT_Half		),
+	PHY_SETTING(   1000, FULL,   1000baseT1_Full		),
+	PHY_SETTING(   1000, FULL,   1000baseX_Full		),
+	PHY_SETTING(   1000, FULL,   1000baseKX_Full		),
+	/* 100M */
+	PHY_SETTING(    100, FULL,    100baseT_Full		),
+	PHY_SETTING(    100, FULL,    100baseT1_Full		),
+	PHY_SETTING(    100, HALF,    100baseT_Half		),
+	PHY_SETTING(    100, HALF,    100baseFX_Half		),
+	PHY_SETTING(    100, FULL,    100baseFX_Full		),
+	/* 10M */
+	PHY_SETTING(     10, FULL,     10baseT_Full		),
+	PHY_SETTING(     10, HALF,     10baseT_Half		),
+	PHY_SETTING(     10, FULL,     10baseT1L_Full		),
+	PHY_SETTING(     10, FULL,     10baseT1S_Full		),
+	PHY_SETTING(     10, HALF,     10baseT1S_Half		),
+	PHY_SETTING(     10, HALF,     10baseT1S_P2MP_Half	),
+};
+#undef PHY_SETTING
+
+/**
+ * phy_lookup_setting - lookup a PHY setting
+ * @speed: speed to match
+ * @duplex: duplex to match
+ * @mask: allowed link modes
+ * @exact: an exact match is required
+ *
+ * Search the settings array for a setting that matches the speed and
+ * duplex, and which is supported.
+ *
+ * If @exact is unset, either an exact match or %NULL for no match will
+ * be returned.
+ *
+ * If @exact is set, an exact match, the fastest supported setting at
+ * or below the specified speed, the slowest supported setting, or if
+ * they all fail, %NULL will be returned.
+ */
+const struct phy_setting *
+phy_lookup_setting(int speed, int duplex, const unsigned long *mask, bool exact)
+{
+	const struct phy_setting *p, *match = NULL, *last = NULL;
+	int i;
+
+	for (i = 0, p = settings; i < ARRAY_SIZE(settings); i++, p++) {
+		if (p->bit < __ETHTOOL_LINK_MODE_MASK_NBITS &&
+		    test_bit(p->bit, mask)) {
+			last = p;
+			if (p->speed == speed && p->duplex == duplex) {
+				/* Exact match for speed and duplex */
+				match = p;
+				break;
+			} else if (!exact) {
+				if (!match && p->speed <= speed)
+					/* Candidate */
+					match = p;
+
+				if (p->speed < speed)
+					break;
+			}
+		}
+	}
+
+	if (!match && !exact)
+		match = last;
+
+	return match;
+}
+EXPORT_SYMBOL_GPL(phy_lookup_setting);
+
+size_t phy_speeds(unsigned int *speeds, size_t size,
+		  unsigned long *mask)
+{
+	size_t count;
+	int i;
+
+	for (i = 0, count = 0; i < ARRAY_SIZE(settings) && count < size; i++)
+		if (settings[i].bit < __ETHTOOL_LINK_MODE_MASK_NBITS &&
+		    test_bit(settings[i].bit, mask) &&
+		    (count == 0 || speeds[count - 1] != settings[i].speed))
+			speeds[count++] = settings[i].speed;
+
+	return count;
+}
+
+static void __set_linkmode_max_speed(u32 max_speed, unsigned long *addr)
+{
+	const struct phy_setting *p;
+	int i;
+
+	for (i = 0, p = settings; i < ARRAY_SIZE(settings); i++, p++) {
+		if (p->speed > max_speed)
+			linkmode_clear_bit(p->bit, addr);
+		else
+			break;
+	}
+}
+
+static void __set_phy_supported(struct phy_device *phydev, u32 max_speed)
+{
+	__set_linkmode_max_speed(max_speed, phydev->supported);
+}
+
+/**
+ * phy_set_max_speed - Set the maximum speed the PHY should support
+ *
+ * @phydev: The phy_device struct
+ * @max_speed: Maximum speed
+ *
+ * The PHY might be more capable than the MAC. For example a Fast Ethernet
+ * is connected to a 1G PHY. This function allows the MAC to indicate its
+ * maximum speed, and so limit what the PHY will advertise.
+ */
+void phy_set_max_speed(struct phy_device *phydev, u32 max_speed)
+{
+	__set_phy_supported(phydev, max_speed);
+
+	phy_advertise_supported(phydev);
+}
+EXPORT_SYMBOL(phy_set_max_speed);
+
+void of_set_phy_supported(struct phy_device *phydev)
+{
+	struct device_node *node = phydev->mdio.dev.of_node;
+	u32 max_speed;
+
+	if (!IS_ENABLED(CONFIG_OF_MDIO))
+		return;
+
+	if (!node)
+		return;
+
+	if (!of_property_read_u32(node, "max-speed", &max_speed))
+		__set_phy_supported(phydev, max_speed);
+}
+
+void of_set_phy_eee_broken(struct phy_device *phydev)
+{
+	struct device_node *node = phydev->mdio.dev.of_node;
+	u32 broken = 0;
+
+	if (!IS_ENABLED(CONFIG_OF_MDIO))
+		return;
+
+	if (!node)
+		return;
+
+	if (of_property_read_bool(node, "eee-broken-100tx"))
+		broken |= MDIO_EEE_100TX;
+	if (of_property_read_bool(node, "eee-broken-1000t"))
+		broken |= MDIO_EEE_1000T;
+	if (of_property_read_bool(node, "eee-broken-10gt"))
+		broken |= MDIO_EEE_10GT;
+	if (of_property_read_bool(node, "eee-broken-1000kx"))
+		broken |= MDIO_EEE_1000KX;
+	if (of_property_read_bool(node, "eee-broken-10gkx4"))
+		broken |= MDIO_EEE_10GKX4;
+	if (of_property_read_bool(node, "eee-broken-10gkr"))
+		broken |= MDIO_EEE_10GKR;
+
+	phydev->eee_broken_modes = broken;
+}
+
+/**
+ * phy_resolve_aneg_pause - Determine pause autoneg results
+ *
+ * @phydev: The phy_device struct
+ *
+ * Once autoneg has completed the local pause settings can be
+ * resolved.  Determine if pause and asymmetric pause should be used
+ * by the MAC.
+ */
+
+void phy_resolve_aneg_pause(struct phy_device *phydev)
+{
+	if (phydev->duplex == DUPLEX_FULL) {
+		phydev->pause = linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
+						  phydev->lp_advertising);
+		phydev->asym_pause = linkmode_test_bit(
+			ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+			phydev->lp_advertising);
+	}
+}
+EXPORT_SYMBOL_GPL(phy_resolve_aneg_pause);
+
+/**
+ * phy_resolve_aneg_linkmode - resolve the advertisements into PHY settings
+ * @phydev: The phy_device struct
+ *
+ * Resolve our and the link partner advertisements into their corresponding
+ * speed and duplex. If full duplex was negotiated, extract the pause mode
+ * from the link partner mask.
+ */
+void phy_resolve_aneg_linkmode(struct phy_device *phydev)
+{
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(common);
+	int i;
+
+	linkmode_and(common, phydev->lp_advertising, phydev->advertising);
+
+	for (i = 0; i < ARRAY_SIZE(settings); i++)
+		if (test_bit(settings[i].bit, common)) {
+			phydev->speed = settings[i].speed;
+			phydev->duplex = settings[i].duplex;
+			break;
+		}
+
+	phy_resolve_aneg_pause(phydev);
+}
+EXPORT_SYMBOL_GPL(phy_resolve_aneg_linkmode);
+
+/**
+ * phy_check_downshift - check whether downshift occurred
+ * @phydev: The phy_device struct
+ *
+ * Check whether a downshift to a lower speed occurred. If this should be the
+ * case warn the user.
+ * Prerequisite for detecting downshift is that PHY driver implements the
+ * read_status callback and sets phydev->speed to the actual link speed.
+ */
+void phy_check_downshift(struct phy_device *phydev)
+{
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(common);
+	int i, speed = SPEED_UNKNOWN;
+
+	phydev->downshifted_rate = 0;
+
+	if (phydev->autoneg == AUTONEG_DISABLE ||
+	    phydev->speed == SPEED_UNKNOWN)
+		return;
+
+	linkmode_and(common, phydev->lp_advertising, phydev->advertising);
+
+	for (i = 0; i < ARRAY_SIZE(settings); i++)
+		if (test_bit(settings[i].bit, common)) {
+			speed = settings[i].speed;
+			break;
+		}
+
+	if (speed == SPEED_UNKNOWN || phydev->speed >= speed)
+		return;
+
+	phydev_warn(phydev, "Downshift occurred from negotiated speed %s to actual speed %s, check cabling!\n",
+		    phy_speed_to_str(speed), phy_speed_to_str(phydev->speed));
+
+	phydev->downshifted_rate = 1;
+}
+EXPORT_SYMBOL_GPL(phy_check_downshift);
+
+static int phy_resolve_min_speed(struct phy_device *phydev, bool fdx_only)
+{
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(common);
+	int i = ARRAY_SIZE(settings);
+
+	linkmode_and(common, phydev->lp_advertising, phydev->advertising);
+
+	while (--i >= 0) {
+		if (test_bit(settings[i].bit, common)) {
+			if (fdx_only && settings[i].duplex != DUPLEX_FULL)
+				continue;
+			return settings[i].speed;
+		}
+	}
+
+	return SPEED_UNKNOWN;
+}
+
+int phy_speed_down_core(struct phy_device *phydev)
+{
+	int min_common_speed = phy_resolve_min_speed(phydev, true);
+
+	if (min_common_speed == SPEED_UNKNOWN)
+		return -EINVAL;
+
+	__set_linkmode_max_speed(min_common_speed, phydev->advertising);
+
+	return 0;
+}
+
+static void mmd_phy_indirect(struct mii_bus *bus, int phy_addr, int devad,
+			     u16 regnum)
+{
+	/* Write the desired MMD Devad */
+	__mdiobus_write(bus, phy_addr, MII_MMD_CTRL, devad);
+
+	/* Write the desired MMD register address */
+	__mdiobus_write(bus, phy_addr, MII_MMD_DATA, regnum);
+
+	/* Select the Function : DATA with no post increment */
+	__mdiobus_write(bus, phy_addr, MII_MMD_CTRL,
+			devad | MII_MMD_CTRL_NOINCR);
+}
+
+/**
+ * __phy_read_mmd - Convenience function for reading a register
+ * from an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to read from (0..31)
+ * @regnum: The register on the MMD to read (0..65535)
+ *
+ * Same rules as for __phy_read();
+ */
+int __phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
+{
+	int val;
+
+	if (regnum > (u16)~0 || devad > 32)
+		return -EINVAL;
+
+	if (phydev->drv && phydev->drv->read_mmd) {
+		val = phydev->drv->read_mmd(phydev, devad, regnum);
+	} else if (phydev->is_c45) {
+		val = __mdiobus_c45_read(phydev->mdio.bus, phydev->mdio.addr,
+					 devad, regnum);
+	} else {
+		struct mii_bus *bus = phydev->mdio.bus;
+		int phy_addr = phydev->mdio.addr;
+
+		mmd_phy_indirect(bus, phy_addr, devad, regnum);
+
+		/* Read the content of the MMD's selected register */
+		val = __mdiobus_read(bus, phy_addr, MII_MMD_DATA);
+	}
+	return val;
+}
+EXPORT_SYMBOL(__phy_read_mmd);
+
+/**
+ * phy_read_mmd - Convenience function for reading a register
+ * from an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ *
+ * Same rules as for phy_read();
+ */
+int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
+{
+	int ret;
+
+	phy_lock_mdio_bus(phydev);
+	ret = __phy_read_mmd(phydev, devad, regnum);
+	phy_unlock_mdio_bus(phydev);
+
+	return ret;
+}
+EXPORT_SYMBOL(phy_read_mmd);
+
+/**
+ * __phy_write_mmd - Convenience function for writing a register
+ * on an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ * @val: value to write to @regnum
+ *
+ * Same rules as for __phy_write();
+ */
+int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
+{
+	int ret;
+
+	if (regnum > (u16)~0 || devad > 32)
+		return -EINVAL;
+
+	if (phydev->drv && phydev->drv->write_mmd) {
+		ret = phydev->drv->write_mmd(phydev, devad, regnum, val);
+	} else if (phydev->is_c45) {
+		ret = __mdiobus_c45_write(phydev->mdio.bus, phydev->mdio.addr,
+					  devad, regnum, val);
+	} else {
+		struct mii_bus *bus = phydev->mdio.bus;
+		int phy_addr = phydev->mdio.addr;
+
+		mmd_phy_indirect(bus, phy_addr, devad, regnum);
+
+		/* Write the data into MMD's selected register */
+		__mdiobus_write(bus, phy_addr, MII_MMD_DATA, val);
+
+		ret = 0;
+	}
+	return ret;
+}
+EXPORT_SYMBOL(__phy_write_mmd);
+
+/**
+ * phy_write_mmd - Convenience function for writing a register
+ * on an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ * @val: value to write to @regnum
+ *
+ * Same rules as for phy_write();
+ */
+int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
+{
+	int ret;
+
+	phy_lock_mdio_bus(phydev);
+	ret = __phy_write_mmd(phydev, devad, regnum, val);
+	phy_unlock_mdio_bus(phydev);
+
+	return ret;
+}
+EXPORT_SYMBOL(phy_write_mmd);
+
+/**
+ * phy_modify_changed - Function for modifying a PHY register
+ * @phydev: the phy_device struct
+ * @regnum: register number to modify
+ * @mask: bit mask of bits to clear
+ * @set: new value of bits set in mask to write to @regnum
+ *
+ * NOTE: MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation.
+ *
+ * Returns negative errno, 0 if there was no change, and 1 in case of change
+ */
+int phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask, u16 set)
+{
+	int ret;
+
+	phy_lock_mdio_bus(phydev);
+	ret = __phy_modify_changed(phydev, regnum, mask, set);
+	phy_unlock_mdio_bus(phydev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_modify_changed);
+
+/**
+ * __phy_modify - Convenience function for modifying a PHY register
+ * @phydev: the phy_device struct
+ * @regnum: register number to modify
+ * @mask: bit mask of bits to clear
+ * @set: new value of bits set in mask to write to @regnum
+ *
+ * NOTE: MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation.
+ */
+int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set)
+{
+	int ret;
+
+	ret = __phy_modify_changed(phydev, regnum, mask, set);
+
+	return ret < 0 ? ret : 0;
+}
+EXPORT_SYMBOL_GPL(__phy_modify);
+
+/**
+ * phy_modify - Convenience function for modifying a given PHY register
+ * @phydev: the phy_device struct
+ * @regnum: register number to write
+ * @mask: bit mask of bits to clear
+ * @set: new value of bits set in mask to write to @regnum
+ *
+ * NOTE: MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation.
+ */
+int phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set)
+{
+	int ret;
+
+	phy_lock_mdio_bus(phydev);
+	ret = __phy_modify(phydev, regnum, mask, set);
+	phy_unlock_mdio_bus(phydev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_modify);
+
+/**
+ * __phy_modify_mmd_changed - Function for modifying a register on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @mask: bit mask of bits to clear
+ * @set: new value of bits set in mask to write to @regnum
+ *
+ * Unlocked helper function which allows a MMD register to be modified as
+ * new register value = (old register value & ~mask) | set
+ *
+ * Returns negative errno, 0 if there was no change, and 1 in case of change
+ */
+int __phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum,
+			     u16 mask, u16 set)
+{
+	int new, ret;
+
+	ret = __phy_read_mmd(phydev, devad, regnum);
+	if (ret < 0)
+		return ret;
+
+	new = (ret & ~mask) | set;
+	if (new == ret)
+		return 0;
+
+	ret = __phy_write_mmd(phydev, devad, regnum, new);
+
+	return ret < 0 ? ret : 1;
+}
+EXPORT_SYMBOL_GPL(__phy_modify_mmd_changed);
+
+/**
+ * phy_modify_mmd_changed - Function for modifying a register on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @mask: bit mask of bits to clear
+ * @set: new value of bits set in mask to write to @regnum
+ *
+ * NOTE: MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation.
+ *
+ * Returns negative errno, 0 if there was no change, and 1 in case of change
+ */
+int phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum,
+			   u16 mask, u16 set)
+{
+	int ret;
+
+	phy_lock_mdio_bus(phydev);
+	ret = __phy_modify_mmd_changed(phydev, devad, regnum, mask, set);
+	phy_unlock_mdio_bus(phydev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_modify_mmd_changed);
+
+/**
+ * __phy_modify_mmd - Convenience function for modifying a register on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @mask: bit mask of bits to clear
+ * @set: new value of bits set in mask to write to @regnum
+ *
+ * NOTE: MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation.
+ */
+int __phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
+		     u16 mask, u16 set)
+{
+	int ret;
+
+	ret = __phy_modify_mmd_changed(phydev, devad, regnum, mask, set);
+
+	return ret < 0 ? ret : 0;
+}
+EXPORT_SYMBOL_GPL(__phy_modify_mmd);
+
+/**
+ * phy_modify_mmd - Convenience function for modifying a register on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @mask: bit mask of bits to clear
+ * @set: new value of bits set in mask to write to @regnum
+ *
+ * NOTE: MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation.
+ */
+int phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
+		   u16 mask, u16 set)
+{
+	int ret;
+
+	phy_lock_mdio_bus(phydev);
+	ret = __phy_modify_mmd(phydev, devad, regnum, mask, set);
+	phy_unlock_mdio_bus(phydev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_modify_mmd);
+
+static int __phy_read_page(struct phy_device *phydev)
+{
+	if (WARN_ONCE(!phydev->drv->read_page, "read_page callback not available, PHY driver not loaded?\n"))
+		return -EOPNOTSUPP;
+
+	return phydev->drv->read_page(phydev);
+}
+
+static int __phy_write_page(struct phy_device *phydev, int page)
+{
+	if (WARN_ONCE(!phydev->drv->write_page, "write_page callback not available, PHY driver not loaded?\n"))
+		return -EOPNOTSUPP;
+
+	return phydev->drv->write_page(phydev, page);
+}
+
+/**
+ * phy_save_page() - take the bus lock and save the current page
+ * @phydev: a pointer to a &struct phy_device
+ *
+ * Take the MDIO bus lock, and return the current page number. On error,
+ * returns a negative errno. phy_restore_page() must always be called
+ * after this, irrespective of success or failure of this call.
+ */
+int phy_save_page(struct phy_device *phydev)
+{
+	phy_lock_mdio_bus(phydev);
+	return __phy_read_page(phydev);
+}
+EXPORT_SYMBOL_GPL(phy_save_page);
+
+/**
+ * phy_select_page() - take the bus lock, save the current page, and set a page
+ * @phydev: a pointer to a &struct phy_device
+ * @page: desired page
+ *
+ * Take the MDIO bus lock to protect against concurrent access, save the
+ * current PHY page, and set the current page.  On error, returns a
+ * negative errno, otherwise returns the previous page number.
+ * phy_restore_page() must always be called after this, irrespective
+ * of success or failure of this call.
+ */
+int phy_select_page(struct phy_device *phydev, int page)
+{
+	int ret, oldpage;
+
+	oldpage = ret = phy_save_page(phydev);
+	if (ret < 0)
+		return ret;
+
+	if (oldpage != page) {
+		ret = __phy_write_page(phydev, page);
+		if (ret < 0)
+			return ret;
+	}
+
+	return oldpage;
+}
+EXPORT_SYMBOL_GPL(phy_select_page);
+
+/**
+ * phy_restore_page() - restore the page register and release the bus lock
+ * @phydev: a pointer to a &struct phy_device
+ * @oldpage: the old page, return value from phy_save_page() or phy_select_page()
+ * @ret: operation's return code
+ *
+ * Release the MDIO bus lock, restoring @oldpage if it is a valid page.
+ * This function propagates the earliest error code from the group of
+ * operations.
+ *
+ * Returns:
+ *   @oldpage if it was a negative value, otherwise
+ *   @ret if it was a negative errno value, otherwise
+ *   phy_write_page()'s negative value if it were in error, otherwise
+ *   @ret.
+ */
+int phy_restore_page(struct phy_device *phydev, int oldpage, int ret)
+{
+	int r;
+
+	if (oldpage >= 0) {
+		r = __phy_write_page(phydev, oldpage);
+
+		/* Propagate the operation return code if the page write
+		 * was successful.
+		 */
+		if (ret >= 0 && r < 0)
+			ret = r;
+	} else {
+		/* Propagate the phy page selection error code */
+		ret = oldpage;
+	}
+
+	phy_unlock_mdio_bus(phydev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_restore_page);
+
+/**
+ * phy_read_paged() - Convenience function for reading a paged register
+ * @phydev: a pointer to a &struct phy_device
+ * @page: the page for the phy
+ * @regnum: register number
+ *
+ * Same rules as for phy_read().
+ */
+int phy_read_paged(struct phy_device *phydev, int page, u32 regnum)
+{
+	int ret = 0, oldpage;
+
+	oldpage = phy_select_page(phydev, page);
+	if (oldpage >= 0)
+		ret = __phy_read(phydev, regnum);
+
+	return phy_restore_page(phydev, oldpage, ret);
+}
+EXPORT_SYMBOL(phy_read_paged);
+
+/**
+ * phy_write_paged() - Convenience function for writing a paged register
+ * @phydev: a pointer to a &struct phy_device
+ * @page: the page for the phy
+ * @regnum: register number
+ * @val: value to write
+ *
+ * Same rules as for phy_write().
+ */
+int phy_write_paged(struct phy_device *phydev, int page, u32 regnum, u16 val)
+{
+	int ret = 0, oldpage;
+
+	oldpage = phy_select_page(phydev, page);
+	if (oldpage >= 0)
+		ret = __phy_write(phydev, regnum, val);
+
+	return phy_restore_page(phydev, oldpage, ret);
+}
+EXPORT_SYMBOL(phy_write_paged);
+
+/**
+ * phy_modify_paged_changed() - Function for modifying a paged register
+ * @phydev: a pointer to a &struct phy_device
+ * @page: the page for the phy
+ * @regnum: register number
+ * @mask: bit mask of bits to clear
+ * @set: bit mask of bits to set
+ *
+ * Returns negative errno, 0 if there was no change, and 1 in case of change
+ */
+int phy_modify_paged_changed(struct phy_device *phydev, int page, u32 regnum,
+			     u16 mask, u16 set)
+{
+	int ret = 0, oldpage;
+
+	oldpage = phy_select_page(phydev, page);
+	if (oldpage >= 0)
+		ret = __phy_modify_changed(phydev, regnum, mask, set);
+
+	return phy_restore_page(phydev, oldpage, ret);
+}
+EXPORT_SYMBOL(phy_modify_paged_changed);
+
+/**
+ * phy_modify_paged() - Convenience function for modifying a paged register
+ * @phydev: a pointer to a &struct phy_device
+ * @page: the page for the phy
+ * @regnum: register number
+ * @mask: bit mask of bits to clear
+ * @set: bit mask of bits to set
+ *
+ * Same rules as for phy_read() and phy_write().
+ */
+int phy_modify_paged(struct phy_device *phydev, int page, u32 regnum,
+		     u16 mask, u16 set)
+{
+	int ret = phy_modify_paged_changed(phydev, page, regnum, mask, set);
+
+	return ret < 0 ? ret : 0;
+}
+EXPORT_SYMBOL(phy_modify_paged);