Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1661 insertions, 0 deletions

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
new file mode 100644
index 000000000..b33e55a73
--- /dev/null
+++ b/drivers/net/phy/phy.c
@@ -0,0 +1,1661 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Framework for configuring and reading PHY devices
+ * Based on code in sungem_phy.c and gianfar_phy.c
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ * Copyright (c) 2006, 2007  Maciej W. Rozycki
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/netlink.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/ethtool_netlink.h>
+#include <linux/phy.h>
+#include <linux/phy_led_triggers.h>
+#include <linux/sfp.h>
+#include <linux/workqueue.h>
+#include <linux/mdio.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/atomic.h>
+#include <linux/suspend.h>
+#include <net/netlink.h>
+#include <net/genetlink.h>
+#include <net/sock.h>
+
+#define PHY_STATE_TIME	HZ
+
+#define PHY_STATE_STR(_state)			\
+	case PHY_##_state:			\
+		return __stringify(_state);	\
+
+static const char *phy_state_to_str(enum phy_state st)
+{
+	switch (st) {
+	PHY_STATE_STR(DOWN)
+	PHY_STATE_STR(READY)
+	PHY_STATE_STR(UP)
+	PHY_STATE_STR(RUNNING)
+	PHY_STATE_STR(NOLINK)
+	PHY_STATE_STR(CABLETEST)
+	PHY_STATE_STR(HALTED)
+	}
+
+	return NULL;
+}
+
+static void phy_link_up(struct phy_device *phydev)
+{
+	phydev->phy_link_change(phydev, true);
+	phy_led_trigger_change_speed(phydev);
+}
+
+static void phy_link_down(struct phy_device *phydev)
+{
+	phydev->phy_link_change(phydev, false);
+	phy_led_trigger_change_speed(phydev);
+	WRITE_ONCE(phydev->link_down_events, phydev->link_down_events + 1);
+}
+
+static const char *phy_pause_str(struct phy_device *phydev)
+{
+	bool local_pause, local_asym_pause;
+
+	if (phydev->autoneg == AUTONEG_DISABLE)
+		goto no_pause;
+
+	local_pause = linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
+					phydev->advertising);
+	local_asym_pause = linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+					     phydev->advertising);
+
+	if (local_pause && phydev->pause)
+		return "rx/tx";
+
+	if (local_asym_pause && phydev->asym_pause) {
+		if (local_pause)
+			return "rx";
+		if (phydev->pause)
+			return "tx";
+	}
+
+no_pause:
+	return "off";
+}
+
+/**
+ * phy_print_status - Convenience function to print out the current phy status
+ * @phydev: the phy_device struct
+ */
+void phy_print_status(struct phy_device *phydev)
+{
+	if (phydev->link) {
+		netdev_info(phydev->attached_dev,
+			"Link is Up - %s/%s %s- flow control %s\n",
+			phy_speed_to_str(phydev->speed),
+			phy_duplex_to_str(phydev->duplex),
+			phydev->downshifted_rate ? "(downshifted) " : "",
+			phy_pause_str(phydev));
+	} else	{
+		netdev_info(phydev->attached_dev, "Link is Down\n");
+	}
+}
+EXPORT_SYMBOL(phy_print_status);
+
+/**
+ * phy_get_rate_matching - determine if rate matching is supported
+ * @phydev: The phy device to return rate matching for
+ * @iface: The interface mode to use
+ *
+ * This determines the type of rate matching (if any) that @phy supports
+ * using @iface. @iface may be %PHY_INTERFACE_MODE_NA to determine if any
+ * interface supports rate matching.
+ *
+ * Return: The type of rate matching @phy supports for @iface, or
+ *         %RATE_MATCH_NONE.
+ */
+int phy_get_rate_matching(struct phy_device *phydev,
+			  phy_interface_t iface)
+{
+	int ret = RATE_MATCH_NONE;
+
+	if (phydev->drv->get_rate_matching) {
+		mutex_lock(&phydev->lock);
+		ret = phydev->drv->get_rate_matching(phydev, iface);
+		mutex_unlock(&phydev->lock);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_get_rate_matching);
+
+/**
+ * phy_config_interrupt - configure the PHY device for the requested interrupts
+ * @phydev: the phy_device struct
+ * @interrupts: interrupt flags to configure for this @phydev
+ *
+ * Returns 0 on success or < 0 on error.
+ */
+static int phy_config_interrupt(struct phy_device *phydev, bool interrupts)
+{
+	phydev->interrupts = interrupts ? 1 : 0;
+	if (phydev->drv->config_intr)
+		return phydev->drv->config_intr(phydev);
+
+	return 0;
+}
+
+/**
+ * phy_restart_aneg - restart auto-negotiation
+ * @phydev: target phy_device struct
+ *
+ * Restart the autonegotiation on @phydev.  Returns >= 0 on success or
+ * negative errno on error.
+ */
+int phy_restart_aneg(struct phy_device *phydev)
+{
+	int ret;
+
+	if (phydev->is_c45 && !(phydev->c45_ids.devices_in_package & BIT(0)))
+		ret = genphy_c45_restart_aneg(phydev);
+	else
+		ret = genphy_restart_aneg(phydev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_restart_aneg);
+
+/**
+ * phy_aneg_done - return auto-negotiation status
+ * @phydev: target phy_device struct
+ *
+ * Description: Return the auto-negotiation status from this @phydev
+ * Returns > 0 on success or < 0 on error. 0 means that auto-negotiation
+ * is still pending.
+ */
+int phy_aneg_done(struct phy_device *phydev)
+{
+	if (phydev->drv && phydev->drv->aneg_done)
+		return phydev->drv->aneg_done(phydev);
+	else if (phydev->is_c45)
+		return genphy_c45_aneg_done(phydev);
+	else
+		return genphy_aneg_done(phydev);
+}
+EXPORT_SYMBOL(phy_aneg_done);
+
+/**
+ * phy_find_valid - find a PHY setting that matches the requested parameters
+ * @speed: desired speed
+ * @duplex: desired duplex
+ * @supported: mask of supported link modes
+ *
+ * Locate a supported phy setting that is, in priority order:
+ * - an exact match for the specified speed and duplex mode
+ * - a match for the specified speed, or slower speed
+ * - the slowest supported speed
+ * Returns the matched phy_setting entry, or %NULL if no supported phy
+ * settings were found.
+ */
+static const struct phy_setting *
+phy_find_valid(int speed, int duplex, unsigned long *supported)
+{
+	return phy_lookup_setting(speed, duplex, supported, false);
+}
+
+/**
+ * phy_supported_speeds - return all speeds currently supported by a phy device
+ * @phy: The phy device to return supported speeds of.
+ * @speeds: buffer to store supported speeds in.
+ * @size:   size of speeds buffer.
+ *
+ * Description: Returns the number of supported speeds, and fills the speeds
+ * buffer with the supported speeds. If speeds buffer is too small to contain
+ * all currently supported speeds, will return as many speeds as can fit.
+ */
+unsigned int phy_supported_speeds(struct phy_device *phy,
+				  unsigned int *speeds,
+				  unsigned int size)
+{
+	return phy_speeds(speeds, size, phy->supported);
+}
+
+/**
+ * phy_check_valid - check if there is a valid PHY setting which matches
+ *		     speed, duplex, and feature mask
+ * @speed: speed to match
+ * @duplex: duplex to match
+ * @features: A mask of the valid settings
+ *
+ * Description: Returns true if there is a valid setting, false otherwise.
+ */
+bool phy_check_valid(int speed, int duplex, unsigned long *features)
+{
+	return !!phy_lookup_setting(speed, duplex, features, true);
+}
+EXPORT_SYMBOL(phy_check_valid);
+
+/**
+ * phy_sanitize_settings - make sure the PHY is set to supported speed and duplex
+ * @phydev: the target phy_device struct
+ *
+ * Description: Make sure the PHY is set to supported speeds and
+ *   duplexes.  Drop down by one in this order:  1000/FULL,
+ *   1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF.
+ */
+static void phy_sanitize_settings(struct phy_device *phydev)
+{
+	const struct phy_setting *setting;
+
+	setting = phy_find_valid(phydev->speed, phydev->duplex,
+				 phydev->supported);
+	if (setting) {
+		phydev->speed = setting->speed;
+		phydev->duplex = setting->duplex;
+	} else {
+		/* We failed to find anything (no supported speeds?) */
+		phydev->speed = SPEED_UNKNOWN;
+		phydev->duplex = DUPLEX_UNKNOWN;
+	}
+}
+
+void phy_ethtool_ksettings_get(struct phy_device *phydev,
+			       struct ethtool_link_ksettings *cmd)
+{
+	mutex_lock(&phydev->lock);
+	linkmode_copy(cmd->link_modes.supported, phydev->supported);
+	linkmode_copy(cmd->link_modes.advertising, phydev->advertising);
+	linkmode_copy(cmd->link_modes.lp_advertising, phydev->lp_advertising);
+
+	cmd->base.speed = phydev->speed;
+	cmd->base.duplex = phydev->duplex;
+	cmd->base.master_slave_cfg = phydev->master_slave_get;
+	cmd->base.master_slave_state = phydev->master_slave_state;
+	cmd->base.rate_matching = phydev->rate_matching;
+	if (phydev->interface == PHY_INTERFACE_MODE_MOCA)
+		cmd->base.port = PORT_BNC;
+	else
+		cmd->base.port = phydev->port;
+	cmd->base.transceiver = phy_is_internal(phydev) ?
+				XCVR_INTERNAL : XCVR_EXTERNAL;
+	cmd->base.phy_address = phydev->mdio.addr;
+	cmd->base.autoneg = phydev->autoneg;
+	cmd->base.eth_tp_mdix_ctrl = phydev->mdix_ctrl;
+	cmd->base.eth_tp_mdix = phydev->mdix;
+	mutex_unlock(&phydev->lock);
+}
+EXPORT_SYMBOL(phy_ethtool_ksettings_get);
+
+/**
+ * phy_mii_ioctl - generic PHY MII ioctl interface
+ * @phydev: the phy_device struct
+ * @ifr: &struct ifreq for socket ioctl's
+ * @cmd: ioctl cmd to execute
+ *
+ * Note that this function is currently incompatible with the
+ * PHYCONTROL layer.  It changes registers without regard to
+ * current state.  Use at own risk.
+ */
+int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
+{
+	struct mii_ioctl_data *mii_data = if_mii(ifr);
+	u16 val = mii_data->val_in;
+	bool change_autoneg = false;
+	int prtad, devad;
+
+	switch (cmd) {
+	case SIOCGMIIPHY:
+		mii_data->phy_id = phydev->mdio.addr;
+		fallthrough;
+
+	case SIOCGMIIREG:
+		if (mdio_phy_id_is_c45(mii_data->phy_id)) {
+			prtad = mdio_phy_id_prtad(mii_data->phy_id);
+			devad = mdio_phy_id_devad(mii_data->phy_id);
+			mii_data->val_out = mdiobus_c45_read(
+				phydev->mdio.bus, prtad, devad,
+				mii_data->reg_num);
+		} else {
+			mii_data->val_out = mdiobus_read(
+				phydev->mdio.bus, mii_data->phy_id,
+				mii_data->reg_num);
+		}
+		return 0;
+
+	case SIOCSMIIREG:
+		if (mdio_phy_id_is_c45(mii_data->phy_id)) {
+			prtad = mdio_phy_id_prtad(mii_data->phy_id);
+			devad = mdio_phy_id_devad(mii_data->phy_id);
+		} else {
+			prtad = mii_data->phy_id;
+			devad = mii_data->reg_num;
+		}
+		if (prtad == phydev->mdio.addr) {
+			switch (devad) {
+			case MII_BMCR:
+				if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0) {
+					if (phydev->autoneg == AUTONEG_ENABLE)
+						change_autoneg = true;
+					phydev->autoneg = AUTONEG_DISABLE;
+					if (val & BMCR_FULLDPLX)
+						phydev->duplex = DUPLEX_FULL;
+					else
+						phydev->duplex = DUPLEX_HALF;
+					if (val & BMCR_SPEED1000)
+						phydev->speed = SPEED_1000;
+					else if (val & BMCR_SPEED100)
+						phydev->speed = SPEED_100;
+					else phydev->speed = SPEED_10;
+				} else {
+					if (phydev->autoneg == AUTONEG_DISABLE)
+						change_autoneg = true;
+					phydev->autoneg = AUTONEG_ENABLE;
+				}
+				break;
+			case MII_ADVERTISE:
+				mii_adv_mod_linkmode_adv_t(phydev->advertising,
+							   val);
+				change_autoneg = true;
+				break;
+			case MII_CTRL1000:
+				mii_ctrl1000_mod_linkmode_adv_t(phydev->advertising,
+							        val);
+				change_autoneg = true;
+				break;
+			default:
+				/* do nothing */
+				break;
+			}
+		}
+
+		if (mdio_phy_id_is_c45(mii_data->phy_id))
+			mdiobus_c45_write(phydev->mdio.bus, prtad, devad,
+					  mii_data->reg_num, val);
+		else
+			mdiobus_write(phydev->mdio.bus, prtad, devad, val);
+
+		if (prtad == phydev->mdio.addr &&
+		    devad == MII_BMCR &&
+		    val & BMCR_RESET)
+			return phy_init_hw(phydev);
+
+		if (change_autoneg)
+			return phy_start_aneg(phydev);
+
+		return 0;
+
+	case SIOCSHWTSTAMP:
+		if (phydev->mii_ts && phydev->mii_ts->hwtstamp)
+			return phydev->mii_ts->hwtstamp(phydev->mii_ts, ifr);
+		fallthrough;
+
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+EXPORT_SYMBOL(phy_mii_ioctl);
+
+/**
+ * phy_do_ioctl - generic ndo_eth_ioctl implementation
+ * @dev: the net_device struct
+ * @ifr: &struct ifreq for socket ioctl's
+ * @cmd: ioctl cmd to execute
+ */
+int phy_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	if (!dev->phydev)
+		return -ENODEV;
+
+	return phy_mii_ioctl(dev->phydev, ifr, cmd);
+}
+EXPORT_SYMBOL(phy_do_ioctl);
+
+/**
+ * phy_do_ioctl_running - generic ndo_eth_ioctl implementation but test first
+ *
+ * @dev: the net_device struct
+ * @ifr: &struct ifreq for socket ioctl's
+ * @cmd: ioctl cmd to execute
+ *
+ * Same as phy_do_ioctl, but ensures that net_device is running before
+ * handling the ioctl.
+ */
+int phy_do_ioctl_running(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	if (!netif_running(dev))
+		return -ENODEV;
+
+	return phy_do_ioctl(dev, ifr, cmd);
+}
+EXPORT_SYMBOL(phy_do_ioctl_running);
+
+/**
+ * phy_queue_state_machine - Trigger the state machine to run soon
+ *
+ * @phydev: the phy_device struct
+ * @jiffies: Run the state machine after these jiffies
+ */
+void phy_queue_state_machine(struct phy_device *phydev, unsigned long jiffies)
+{
+	mod_delayed_work(system_power_efficient_wq, &phydev->state_queue,
+			 jiffies);
+}
+EXPORT_SYMBOL(phy_queue_state_machine);
+
+/**
+ * phy_trigger_machine - Trigger the state machine to run now
+ *
+ * @phydev: the phy_device struct
+ */
+void phy_trigger_machine(struct phy_device *phydev)
+{
+	phy_queue_state_machine(phydev, 0);
+}
+EXPORT_SYMBOL(phy_trigger_machine);
+
+static void phy_abort_cable_test(struct phy_device *phydev)
+{
+	int err;
+
+	ethnl_cable_test_finished(phydev);
+
+	err = phy_init_hw(phydev);
+	if (err)
+		phydev_err(phydev, "Error while aborting cable test");
+}
+
+/**
+ * phy_ethtool_get_strings - Get the statistic counter names
+ *
+ * @phydev: the phy_device struct
+ * @data: Where to put the strings
+ */
+int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data)
+{
+	if (!phydev->drv)
+		return -EIO;
+
+	mutex_lock(&phydev->lock);
+	phydev->drv->get_strings(phydev, data);
+	mutex_unlock(&phydev->lock);
+
+	return 0;
+}
+EXPORT_SYMBOL(phy_ethtool_get_strings);
+
+/**
+ * phy_ethtool_get_sset_count - Get the number of statistic counters
+ *
+ * @phydev: the phy_device struct
+ */
+int phy_ethtool_get_sset_count(struct phy_device *phydev)
+{
+	int ret;
+
+	if (!phydev->drv)
+		return -EIO;
+
+	if (phydev->drv->get_sset_count &&
+	    phydev->drv->get_strings &&
+	    phydev->drv->get_stats) {
+		mutex_lock(&phydev->lock);
+		ret = phydev->drv->get_sset_count(phydev);
+		mutex_unlock(&phydev->lock);
+
+		return ret;
+	}
+
+	return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL(phy_ethtool_get_sset_count);
+
+/**
+ * phy_ethtool_get_stats - Get the statistic counters
+ *
+ * @phydev: the phy_device struct
+ * @stats: What counters to get
+ * @data: Where to store the counters
+ */
+int phy_ethtool_get_stats(struct phy_device *phydev,
+			  struct ethtool_stats *stats, u64 *data)
+{
+	if (!phydev->drv)
+		return -EIO;
+
+	mutex_lock(&phydev->lock);
+	phydev->drv->get_stats(phydev, stats, data);
+	mutex_unlock(&phydev->lock);
+
+	return 0;
+}
+EXPORT_SYMBOL(phy_ethtool_get_stats);
+
+/**
+ * phy_ethtool_get_plca_cfg - Get PLCA RS configuration
+ * @phydev: the phy_device struct
+ * @plca_cfg: where to store the retrieved configuration
+ *
+ * Retrieve the PLCA configuration from the PHY. Return 0 on success or a
+ * negative value if an error occurred.
+ */
+int phy_ethtool_get_plca_cfg(struct phy_device *phydev,
+			     struct phy_plca_cfg *plca_cfg)
+{
+	int ret;
+
+	if (!phydev->drv) {
+		ret = -EIO;
+		goto out;
+	}
+
+	if (!phydev->drv->get_plca_cfg) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	mutex_lock(&phydev->lock);
+	ret = phydev->drv->get_plca_cfg(phydev, plca_cfg);
+
+	mutex_unlock(&phydev->lock);
+out:
+	return ret;
+}
+
+/**
+ * plca_check_valid - Check PLCA configuration before enabling
+ * @phydev: the phy_device struct
+ * @plca_cfg: current PLCA configuration
+ * @extack: extack for reporting useful error messages
+ *
+ * Checks whether the PLCA and PHY configuration are consistent and it is safe
+ * to enable PLCA. Returns 0 on success or a negative value if the PLCA or PHY
+ * configuration is not consistent.
+ */
+static int plca_check_valid(struct phy_device *phydev,
+			    const struct phy_plca_cfg *plca_cfg,
+			    struct netlink_ext_ack *extack)
+{
+	int ret = 0;
+
+	if (!linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT,
+			       phydev->advertising)) {
+		ret = -EOPNOTSUPP;
+		NL_SET_ERR_MSG(extack,
+			       "Point to Multi-Point mode is not enabled");
+	} else if (plca_cfg->node_id >= 255) {
+		NL_SET_ERR_MSG(extack, "PLCA node ID is not set");
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+/**
+ * phy_ethtool_set_plca_cfg - Set PLCA RS configuration
+ * @phydev: the phy_device struct
+ * @plca_cfg: new PLCA configuration to apply
+ * @extack: extack for reporting useful error messages
+ *
+ * Sets the PLCA configuration in the PHY. Return 0 on success or a
+ * negative value if an error occurred.
+ */
+int phy_ethtool_set_plca_cfg(struct phy_device *phydev,
+			     const struct phy_plca_cfg *plca_cfg,
+			     struct netlink_ext_ack *extack)
+{
+	struct phy_plca_cfg *curr_plca_cfg;
+	int ret;
+
+	if (!phydev->drv) {
+		ret = -EIO;
+		goto out;
+	}
+
+	if (!phydev->drv->set_plca_cfg ||
+	    !phydev->drv->get_plca_cfg) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	curr_plca_cfg = kmalloc(sizeof(*curr_plca_cfg), GFP_KERNEL);
+	if (!curr_plca_cfg) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	mutex_lock(&phydev->lock);
+
+	ret = phydev->drv->get_plca_cfg(phydev, curr_plca_cfg);
+	if (ret)
+		goto out_drv;
+
+	if (curr_plca_cfg->enabled < 0 && plca_cfg->enabled >= 0) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY does not support changing the PLCA 'enable' attribute");
+		ret = -EINVAL;
+		goto out_drv;
+	}
+
+	if (curr_plca_cfg->node_id < 0 && plca_cfg->node_id >= 0) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY does not support changing the PLCA 'local node ID' attribute");
+		ret = -EINVAL;
+		goto out_drv;
+	}
+
+	if (curr_plca_cfg->node_cnt < 0 && plca_cfg->node_cnt >= 0) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY does not support changing the PLCA 'node count' attribute");
+		ret = -EINVAL;
+		goto out_drv;
+	}
+
+	if (curr_plca_cfg->to_tmr < 0 && plca_cfg->to_tmr >= 0) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY does not support changing the PLCA 'TO timer' attribute");
+		ret = -EINVAL;
+		goto out_drv;
+	}
+
+	if (curr_plca_cfg->burst_cnt < 0 && plca_cfg->burst_cnt >= 0) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY does not support changing the PLCA 'burst count' attribute");
+		ret = -EINVAL;
+		goto out_drv;
+	}
+
+	if (curr_plca_cfg->burst_tmr < 0 && plca_cfg->burst_tmr >= 0) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY does not support changing the PLCA 'burst timer' attribute");
+		ret = -EINVAL;
+		goto out_drv;
+	}
+
+	// if enabling PLCA, perform a few sanity checks
+	if (plca_cfg->enabled > 0) {
+		// allow setting node_id concurrently with enabled
+		if (plca_cfg->node_id >= 0)
+			curr_plca_cfg->node_id = plca_cfg->node_id;
+
+		ret = plca_check_valid(phydev, curr_plca_cfg, extack);
+		if (ret)
+			goto out_drv;
+	}
+
+	ret = phydev->drv->set_plca_cfg(phydev, plca_cfg);
+
+out_drv:
+	kfree(curr_plca_cfg);
+	mutex_unlock(&phydev->lock);
+out:
+	return ret;
+}
+
+/**
+ * phy_ethtool_get_plca_status - Get PLCA RS status information
+ * @phydev: the phy_device struct
+ * @plca_st: where to store the retrieved status information
+ *
+ * Retrieve the PLCA status information from the PHY. Return 0 on success or a
+ * negative value if an error occurred.
+ */
+int phy_ethtool_get_plca_status(struct phy_device *phydev,
+				struct phy_plca_status *plca_st)
+{
+	int ret;
+
+	if (!phydev->drv) {
+		ret = -EIO;
+		goto out;
+	}
+
+	if (!phydev->drv->get_plca_status) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	mutex_lock(&phydev->lock);
+	ret = phydev->drv->get_plca_status(phydev, plca_st);
+
+	mutex_unlock(&phydev->lock);
+out:
+	return ret;
+}
+
+/**
+ * phy_start_cable_test - Start a cable test
+ *
+ * @phydev: the phy_device struct
+ * @extack: extack for reporting useful error messages
+ */
+int phy_start_cable_test(struct phy_device *phydev,
+			 struct netlink_ext_ack *extack)
+{
+	struct net_device *dev = phydev->attached_dev;
+	int err = -ENOMEM;
+
+	if (!(phydev->drv &&
+	      phydev->drv->cable_test_start &&
+	      phydev->drv->cable_test_get_status)) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY driver does not support cable testing");
+		return -EOPNOTSUPP;
+	}
+
+	mutex_lock(&phydev->lock);
+	if (phydev->state == PHY_CABLETEST) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY already performing a test");
+		err = -EBUSY;
+		goto out;
+	}
+
+	if (phydev->state < PHY_UP ||
+	    phydev->state > PHY_CABLETEST) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY not configured. Try setting interface up");
+		err = -EBUSY;
+		goto out;
+	}
+
+	err = ethnl_cable_test_alloc(phydev, ETHTOOL_MSG_CABLE_TEST_NTF);
+	if (err)
+		goto out;
+
+	/* Mark the carrier down until the test is complete */
+	phy_link_down(phydev);
+
+	netif_testing_on(dev);
+	err = phydev->drv->cable_test_start(phydev);
+	if (err) {
+		netif_testing_off(dev);
+		phy_link_up(phydev);
+		goto out_free;
+	}
+
+	phydev->state = PHY_CABLETEST;
+
+	if (phy_polling_mode(phydev))
+		phy_trigger_machine(phydev);
+
+	mutex_unlock(&phydev->lock);
+
+	return 0;
+
+out_free:
+	ethnl_cable_test_free(phydev);
+out:
+	mutex_unlock(&phydev->lock);
+
+	return err;
+}
+EXPORT_SYMBOL(phy_start_cable_test);
+
+/**
+ * phy_start_cable_test_tdr - Start a raw TDR cable test
+ *
+ * @phydev: the phy_device struct
+ * @extack: extack for reporting useful error messages
+ * @config: Configuration of the test to run
+ */
+int phy_start_cable_test_tdr(struct phy_device *phydev,
+			     struct netlink_ext_ack *extack,
+			     const struct phy_tdr_config *config)
+{
+	struct net_device *dev = phydev->attached_dev;
+	int err = -ENOMEM;
+
+	if (!(phydev->drv &&
+	      phydev->drv->cable_test_tdr_start &&
+	      phydev->drv->cable_test_get_status)) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY driver does not support cable test TDR");
+		return -EOPNOTSUPP;
+	}
+
+	mutex_lock(&phydev->lock);
+	if (phydev->state == PHY_CABLETEST) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY already performing a test");
+		err = -EBUSY;
+		goto out;
+	}
+
+	if (phydev->state < PHY_UP ||
+	    phydev->state > PHY_CABLETEST) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY not configured. Try setting interface up");
+		err = -EBUSY;
+		goto out;
+	}
+
+	err = ethnl_cable_test_alloc(phydev, ETHTOOL_MSG_CABLE_TEST_TDR_NTF);
+	if (err)
+		goto out;
+
+	/* Mark the carrier down until the test is complete */
+	phy_link_down(phydev);
+
+	netif_testing_on(dev);
+	err = phydev->drv->cable_test_tdr_start(phydev, config);
+	if (err) {
+		netif_testing_off(dev);
+		phy_link_up(phydev);
+		goto out_free;
+	}
+
+	phydev->state = PHY_CABLETEST;
+
+	if (phy_polling_mode(phydev))
+		phy_trigger_machine(phydev);
+
+	mutex_unlock(&phydev->lock);
+
+	return 0;
+
+out_free:
+	ethnl_cable_test_free(phydev);
+out:
+	mutex_unlock(&phydev->lock);
+
+	return err;
+}
+EXPORT_SYMBOL(phy_start_cable_test_tdr);
+
+int phy_config_aneg(struct phy_device *phydev)
+{
+	if (phydev->drv->config_aneg)
+		return phydev->drv->config_aneg(phydev);
+
+	/* Clause 45 PHYs that don't implement Clause 22 registers are not
+	 * allowed to call genphy_config_aneg()
+	 */
+	if (phydev->is_c45 && !(phydev->c45_ids.devices_in_package & BIT(0)))
+		return genphy_c45_config_aneg(phydev);
+
+	return genphy_config_aneg(phydev);
+}
+EXPORT_SYMBOL(phy_config_aneg);
+
+/**
+ * phy_check_link_status - check link status and set state accordingly
+ * @phydev: the phy_device struct
+ *
+ * Description: Check for link and whether autoneg was triggered / is running
+ * and set state accordingly
+ */
+static int phy_check_link_status(struct phy_device *phydev)
+{
+	int err;
+
+	lockdep_assert_held(&phydev->lock);
+
+	/* Keep previous state if loopback is enabled because some PHYs
+	 * report that Link is Down when loopback is enabled.
+	 */
+	if (phydev->loopback_enabled)
+		return 0;
+
+	err = phy_read_status(phydev);
+	if (err)
+		return err;
+
+	if (phydev->link && phydev->state != PHY_RUNNING) {
+		phy_check_downshift(phydev);
+		phydev->state = PHY_RUNNING;
+		phy_link_up(phydev);
+	} else if (!phydev->link && phydev->state != PHY_NOLINK) {
+		phydev->state = PHY_NOLINK;
+		phy_link_down(phydev);
+	}
+
+	return 0;
+}
+
+/**
+ * _phy_start_aneg - start auto-negotiation for this PHY device
+ * @phydev: the phy_device struct
+ *
+ * Description: Sanitizes the settings (if we're not autonegotiating
+ *   them), and then calls the driver's config_aneg function.
+ *   If the PHYCONTROL Layer is operating, we change the state to
+ *   reflect the beginning of Auto-negotiation or forcing.
+ */
+static int _phy_start_aneg(struct phy_device *phydev)
+{
+	int err;
+
+	lockdep_assert_held(&phydev->lock);
+
+	if (!phydev->drv)
+		return -EIO;
+
+	if (AUTONEG_DISABLE == phydev->autoneg)
+		phy_sanitize_settings(phydev);
+
+	err = phy_config_aneg(phydev);
+	if (err < 0)
+		return err;
+
+	if (phy_is_started(phydev))
+		err = phy_check_link_status(phydev);
+
+	return err;
+}
+
+/**
+ * phy_start_aneg - start auto-negotiation for this PHY device
+ * @phydev: the phy_device struct
+ *
+ * Description: Sanitizes the settings (if we're not autonegotiating
+ *   them), and then calls the driver's config_aneg function.
+ *   If the PHYCONTROL Layer is operating, we change the state to
+ *   reflect the beginning of Auto-negotiation or forcing.
+ */
+int phy_start_aneg(struct phy_device *phydev)
+{
+	int err;
+
+	mutex_lock(&phydev->lock);
+	err = _phy_start_aneg(phydev);
+	mutex_unlock(&phydev->lock);
+
+	return err;
+}
+EXPORT_SYMBOL(phy_start_aneg);
+
+static int phy_poll_aneg_done(struct phy_device *phydev)
+{
+	unsigned int retries = 100;
+	int ret;
+
+	do {
+		msleep(100);
+		ret = phy_aneg_done(phydev);
+	} while (!ret && --retries);
+
+	if (!ret)
+		return -ETIMEDOUT;
+
+	return ret < 0 ? ret : 0;
+}
+
+int phy_ethtool_ksettings_set(struct phy_device *phydev,
+			      const struct ethtool_link_ksettings *cmd)
+{
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
+	u8 autoneg = cmd->base.autoneg;
+	u8 duplex = cmd->base.duplex;
+	u32 speed = cmd->base.speed;
+
+	if (cmd->base.phy_address != phydev->mdio.addr)
+		return -EINVAL;
+
+	linkmode_copy(advertising, cmd->link_modes.advertising);
+
+	/* We make sure that we don't pass unsupported values in to the PHY */
+	linkmode_and(advertising, advertising, phydev->supported);
+
+	/* Verify the settings we care about. */
+	if (autoneg != AUTONEG_ENABLE && autoneg != AUTONEG_DISABLE)
+		return -EINVAL;
+
+	if (autoneg == AUTONEG_ENABLE && linkmode_empty(advertising))
+		return -EINVAL;
+
+	if (autoneg == AUTONEG_DISABLE &&
+	    ((speed != SPEED_1000 &&
+	      speed != SPEED_100 &&
+	      speed != SPEED_10) ||
+	     (duplex != DUPLEX_HALF &&
+	      duplex != DUPLEX_FULL)))
+		return -EINVAL;
+
+	mutex_lock(&phydev->lock);
+	phydev->autoneg = autoneg;
+
+	if (autoneg == AUTONEG_DISABLE) {
+		phydev->speed = speed;
+		phydev->duplex = duplex;
+	}
+
+	linkmode_copy(phydev->advertising, advertising);
+
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+			 phydev->advertising, autoneg == AUTONEG_ENABLE);
+
+	phydev->master_slave_set = cmd->base.master_slave_cfg;
+	phydev->mdix_ctrl = cmd->base.eth_tp_mdix_ctrl;
+
+	/* Restart the PHY */
+	if (phy_is_started(phydev)) {
+		phydev->state = PHY_UP;
+		phy_trigger_machine(phydev);
+	} else {
+		_phy_start_aneg(phydev);
+	}
+
+	mutex_unlock(&phydev->lock);
+	return 0;
+}
+EXPORT_SYMBOL(phy_ethtool_ksettings_set);
+
+/**
+ * phy_speed_down - set speed to lowest speed supported by both link partners
+ * @phydev: the phy_device struct
+ * @sync: perform action synchronously
+ *
+ * Description: Typically used to save energy when waiting for a WoL packet
+ *
+ * WARNING: Setting sync to false may cause the system being unable to suspend
+ * in case the PHY generates an interrupt when finishing the autonegotiation.
+ * This interrupt may wake up the system immediately after suspend.
+ * Therefore use sync = false only if you're sure it's safe with the respective
+ * network chip.
+ */
+int phy_speed_down(struct phy_device *phydev, bool sync)
+{
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(adv_tmp);
+	int ret = 0;
+
+	mutex_lock(&phydev->lock);
+
+	if (phydev->autoneg != AUTONEG_ENABLE)
+		goto out;
+
+	linkmode_copy(adv_tmp, phydev->advertising);
+
+	ret = phy_speed_down_core(phydev);
+	if (ret)
+		goto out;
+
+	linkmode_copy(phydev->adv_old, adv_tmp);
+
+	if (linkmode_equal(phydev->advertising, adv_tmp)) {
+		ret = 0;
+		goto out;
+	}
+
+	ret = phy_config_aneg(phydev);
+	if (ret)
+		goto out;
+
+	ret = sync ? phy_poll_aneg_done(phydev) : 0;
+out:
+	mutex_unlock(&phydev->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_speed_down);
+
+/**
+ * phy_speed_up - (re)set advertised speeds to all supported speeds
+ * @phydev: the phy_device struct
+ *
+ * Description: Used to revert the effect of phy_speed_down
+ */
+int phy_speed_up(struct phy_device *phydev)
+{
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(adv_tmp);
+	int ret = 0;
+
+	mutex_lock(&phydev->lock);
+
+	if (phydev->autoneg != AUTONEG_ENABLE)
+		goto out;
+
+	if (linkmode_empty(phydev->adv_old))
+		goto out;
+
+	linkmode_copy(adv_tmp, phydev->advertising);
+	linkmode_copy(phydev->advertising, phydev->adv_old);
+	linkmode_zero(phydev->adv_old);
+
+	if (linkmode_equal(phydev->advertising, adv_tmp))
+		goto out;
+
+	ret = phy_config_aneg(phydev);
+out:
+	mutex_unlock(&phydev->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_speed_up);
+
+/**
+ * phy_start_machine - start PHY state machine tracking
+ * @phydev: the phy_device struct
+ *
+ * Description: The PHY infrastructure can run a state machine
+ *   which tracks whether the PHY is starting up, negotiating,
+ *   etc.  This function starts the delayed workqueue which tracks
+ *   the state of the PHY. If you want to maintain your own state machine,
+ *   do not call this function.
+ */
+void phy_start_machine(struct phy_device *phydev)
+{
+	phy_trigger_machine(phydev);
+}
+EXPORT_SYMBOL_GPL(phy_start_machine);
+
+/**
+ * phy_stop_machine - stop the PHY state machine tracking
+ * @phydev: target phy_device struct
+ *
+ * Description: Stops the state machine delayed workqueue, sets the
+ *   state to UP (unless it wasn't up yet). This function must be
+ *   called BEFORE phy_detach.
+ */
+void phy_stop_machine(struct phy_device *phydev)
+{
+	cancel_delayed_work_sync(&phydev->state_queue);
+
+	mutex_lock(&phydev->lock);
+	if (phy_is_started(phydev))
+		phydev->state = PHY_UP;
+	mutex_unlock(&phydev->lock);
+}
+
+/**
+ * phy_error - enter HALTED state for this PHY device
+ * @phydev: target phy_device struct
+ *
+ * Moves the PHY to the HALTED state in response to a read
+ * or write error, and tells the controller the link is down.
+ * Must not be called from interrupt context, or while the
+ * phydev->lock is held.
+ */
+void phy_error(struct phy_device *phydev)
+{
+	WARN_ON(1);
+
+	mutex_lock(&phydev->lock);
+	phydev->state = PHY_HALTED;
+	mutex_unlock(&phydev->lock);
+
+	phy_trigger_machine(phydev);
+}
+EXPORT_SYMBOL(phy_error);
+
+/**
+ * phy_disable_interrupts - Disable the PHY interrupts from the PHY side
+ * @phydev: target phy_device struct
+ */
+int phy_disable_interrupts(struct phy_device *phydev)
+{
+	/* Disable PHY interrupts */
+	return phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
+}
+
+/**
+ * phy_interrupt - PHY interrupt handler
+ * @irq: interrupt line
+ * @phy_dat: phy_device pointer
+ *
+ * Description: Handle PHY interrupt
+ */
+static irqreturn_t phy_interrupt(int irq, void *phy_dat)
+{
+	struct phy_device *phydev = phy_dat;
+	struct phy_driver *drv = phydev->drv;
+	irqreturn_t ret;
+
+	/* Wakeup interrupts may occur during a system sleep transition.
+	 * Postpone handling until the PHY has resumed.
+	 */
+	if (IS_ENABLED(CONFIG_PM_SLEEP) && phydev->irq_suspended) {
+		struct net_device *netdev = phydev->attached_dev;
+
+		if (netdev) {
+			struct device *parent = netdev->dev.parent;
+
+			if (netdev->wol_enabled)
+				pm_system_wakeup();
+			else if (device_may_wakeup(&netdev->dev))
+				pm_wakeup_dev_event(&netdev->dev, 0, true);
+			else if (parent && device_may_wakeup(parent))
+				pm_wakeup_dev_event(parent, 0, true);
+		}
+
+		phydev->irq_rerun = 1;
+		disable_irq_nosync(irq);
+		return IRQ_HANDLED;
+	}
+
+	mutex_lock(&phydev->lock);
+	ret = drv->handle_interrupt(phydev);
+	mutex_unlock(&phydev->lock);
+
+	return ret;
+}
+
+/**
+ * phy_enable_interrupts - Enable the interrupts from the PHY side
+ * @phydev: target phy_device struct
+ */
+static int phy_enable_interrupts(struct phy_device *phydev)
+{
+	return phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
+}
+
+/**
+ * phy_request_interrupt - request and enable interrupt for a PHY device
+ * @phydev: target phy_device struct
+ *
+ * Description: Request and enable the interrupt for the given PHY.
+ *   If this fails, then we set irq to PHY_POLL.
+ *   This should only be called with a valid IRQ number.
+ */
+void phy_request_interrupt(struct phy_device *phydev)
+{
+	int err;
+
+	err = request_threaded_irq(phydev->irq, NULL, phy_interrupt,
+				   IRQF_ONESHOT | IRQF_SHARED,
+				   phydev_name(phydev), phydev);
+	if (err) {
+		phydev_warn(phydev, "Error %d requesting IRQ %d, falling back to polling\n",
+			    err, phydev->irq);
+		phydev->irq = PHY_POLL;
+	} else {
+		if (phy_enable_interrupts(phydev)) {
+			phydev_warn(phydev, "Can't enable interrupt, falling back to polling\n");
+			phy_free_interrupt(phydev);
+			phydev->irq = PHY_POLL;
+		}
+	}
+}
+EXPORT_SYMBOL(phy_request_interrupt);
+
+/**
+ * phy_free_interrupt - disable and free interrupt for a PHY device
+ * @phydev: target phy_device struct
+ *
+ * Description: Disable and free the interrupt for the given PHY.
+ *   This should only be called with a valid IRQ number.
+ */
+void phy_free_interrupt(struct phy_device *phydev)
+{
+	phy_disable_interrupts(phydev);
+	free_irq(phydev->irq, phydev);
+}
+EXPORT_SYMBOL(phy_free_interrupt);
+
+/**
+ * phy_stop - Bring down the PHY link, and stop checking the status
+ * @phydev: target phy_device struct
+ */
+void phy_stop(struct phy_device *phydev)
+{
+	struct net_device *dev = phydev->attached_dev;
+
+	if (!phy_is_started(phydev) && phydev->state != PHY_DOWN) {
+		WARN(1, "called from state %s\n",
+		     phy_state_to_str(phydev->state));
+		return;
+	}
+
+	mutex_lock(&phydev->lock);
+
+	if (phydev->state == PHY_CABLETEST) {
+		phy_abort_cable_test(phydev);
+		netif_testing_off(dev);
+	}
+
+	if (phydev->sfp_bus)
+		sfp_upstream_stop(phydev->sfp_bus);
+
+	phydev->state = PHY_HALTED;
+
+	mutex_unlock(&phydev->lock);
+
+	phy_state_machine(&phydev->state_queue.work);
+	phy_stop_machine(phydev);
+
+	/* Cannot call flush_scheduled_work() here as desired because
+	 * of rtnl_lock(), but PHY_HALTED shall guarantee irq handler
+	 * will not reenable interrupts.
+	 */
+}
+EXPORT_SYMBOL(phy_stop);
+
+/**
+ * phy_start - start or restart a PHY device
+ * @phydev: target phy_device struct
+ *
+ * Description: Indicates the attached device's readiness to
+ *   handle PHY-related work.  Used during startup to start the
+ *   PHY, and after a call to phy_stop() to resume operation.
+ *   Also used to indicate the MDIO bus has cleared an error
+ *   condition.
+ */
+void phy_start(struct phy_device *phydev)
+{
+	mutex_lock(&phydev->lock);
+
+	if (phydev->state != PHY_READY && phydev->state != PHY_HALTED) {
+		WARN(1, "called from state %s\n",
+		     phy_state_to_str(phydev->state));
+		goto out;
+	}
+
+	if (phydev->sfp_bus)
+		sfp_upstream_start(phydev->sfp_bus);
+
+	/* if phy was suspended, bring the physical link up again */
+	__phy_resume(phydev);
+
+	phydev->state = PHY_UP;
+
+	phy_start_machine(phydev);
+out:
+	mutex_unlock(&phydev->lock);
+}
+EXPORT_SYMBOL(phy_start);
+
+/**
+ * phy_state_machine - Handle the state machine
+ * @work: work_struct that describes the work to be done
+ */
+void phy_state_machine(struct work_struct *work)
+{
+	struct delayed_work *dwork = to_delayed_work(work);
+	struct phy_device *phydev =
+			container_of(dwork, struct phy_device, state_queue);
+	struct net_device *dev = phydev->attached_dev;
+	bool needs_aneg = false, do_suspend = false;
+	enum phy_state old_state;
+	bool finished = false;
+	int err = 0;
+
+	mutex_lock(&phydev->lock);
+
+	old_state = phydev->state;
+
+	switch (phydev->state) {
+	case PHY_DOWN:
+	case PHY_READY:
+		break;
+	case PHY_UP:
+		needs_aneg = true;
+
+		break;
+	case PHY_NOLINK:
+	case PHY_RUNNING:
+		err = phy_check_link_status(phydev);
+		break;
+	case PHY_CABLETEST:
+		err = phydev->drv->cable_test_get_status(phydev, &finished);
+		if (err) {
+			phy_abort_cable_test(phydev);
+			netif_testing_off(dev);
+			needs_aneg = true;
+			phydev->state = PHY_UP;
+			break;
+		}
+
+		if (finished) {
+			ethnl_cable_test_finished(phydev);
+			netif_testing_off(dev);
+			needs_aneg = true;
+			phydev->state = PHY_UP;
+		}
+		break;
+	case PHY_HALTED:
+		if (phydev->link) {
+			phydev->link = 0;
+			phy_link_down(phydev);
+		}
+		do_suspend = true;
+		break;
+	}
+
+	mutex_unlock(&phydev->lock);
+
+	if (needs_aneg)
+		err = phy_start_aneg(phydev);
+	else if (do_suspend)
+		phy_suspend(phydev);
+
+	if (err == -ENODEV)
+		return;
+
+	if (err < 0)
+		phy_error(phydev);
+
+	if (old_state != phydev->state) {
+		phydev_dbg(phydev, "PHY state change %s -> %s\n",
+			   phy_state_to_str(old_state),
+			   phy_state_to_str(phydev->state));
+		if (phydev->drv && phydev->drv->link_change_notify)
+			phydev->drv->link_change_notify(phydev);
+	}
+
+	/* Only re-schedule a PHY state machine change if we are polling the
+	 * PHY, if PHY_MAC_INTERRUPT is set, then we will be moving
+	 * between states from phy_mac_interrupt().
+	 *
+	 * In state PHY_HALTED the PHY gets suspended, so rescheduling the
+	 * state machine would be pointless and possibly error prone when
+	 * called from phy_disconnect() synchronously.
+	 */
+	mutex_lock(&phydev->lock);
+	if (phy_polling_mode(phydev) && phy_is_started(phydev))
+		phy_queue_state_machine(phydev, PHY_STATE_TIME);
+	mutex_unlock(&phydev->lock);
+}
+
+/**
+ * phy_mac_interrupt - MAC says the link has changed
+ * @phydev: phy_device struct with changed link
+ *
+ * The MAC layer is able to indicate there has been a change in the PHY link
+ * status. Trigger the state machine and work a work queue.
+ */
+void phy_mac_interrupt(struct phy_device *phydev)
+{
+	/* Trigger a state machine change */
+	phy_trigger_machine(phydev);
+}
+EXPORT_SYMBOL(phy_mac_interrupt);
+
+/**
+ * phy_init_eee - init and check the EEE feature
+ * @phydev: target phy_device struct
+ * @clk_stop_enable: PHY may stop the clock during LPI
+ *
+ * Description: it checks if the Energy-Efficient Ethernet (EEE)
+ * is supported by looking at the MMD registers 3.20 and 7.60/61
+ * and it programs the MMD register 3.0 setting the "Clock stop enable"
+ * bit if required.
+ */
+int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
+{
+	int ret;
+
+	if (!phydev->drv)
+		return -EIO;
+
+	ret = genphy_c45_eee_is_active(phydev, NULL, NULL, NULL);
+	if (ret < 0)
+		return ret;
+	if (!ret)
+		return -EPROTONOSUPPORT;
+
+	if (clk_stop_enable)
+		/* Configure the PHY to stop receiving xMII
+		 * clock while it is signaling LPI.
+		 */
+		ret = phy_set_bits_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1,
+				       MDIO_PCS_CTRL1_CLKSTOP_EN);
+
+	return ret < 0 ? ret : 0;
+}
+EXPORT_SYMBOL(phy_init_eee);
+
+/**
+ * phy_get_eee_err - report the EEE wake error count
+ * @phydev: target phy_device struct
+ *
+ * Description: it is to report the number of time where the PHY
+ * failed to complete its normal wake sequence.
+ */
+int phy_get_eee_err(struct phy_device *phydev)
+{
+	int ret;
+
+	if (!phydev->drv)
+		return -EIO;
+
+	mutex_lock(&phydev->lock);
+	ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_WK_ERR);
+	mutex_unlock(&phydev->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(phy_get_eee_err);
+
+/**
+ * phy_ethtool_get_eee - get EEE supported and status
+ * @phydev: target phy_device struct
+ * @data: ethtool_eee data
+ *
+ * Description: it reportes the Supported/Advertisement/LP Advertisement
+ * capabilities.
+ */
+int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data)
+{
+	int ret;
+
+	if (!phydev->drv)
+		return -EIO;
+
+	mutex_lock(&phydev->lock);
+	ret = genphy_c45_ethtool_get_eee(phydev, data);
+	mutex_unlock(&phydev->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(phy_ethtool_get_eee);
+
+/**
+ * phy_ethtool_set_eee - set EEE supported and status
+ * @phydev: target phy_device struct
+ * @data: ethtool_eee data
+ *
+ * Description: it is to program the Advertisement EEE register.
+ */
+int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
+{
+	int ret;
+
+	if (!phydev->drv)
+		return -EIO;
+
+	mutex_lock(&phydev->lock);
+	ret = genphy_c45_ethtool_set_eee(phydev, data);
+	mutex_unlock(&phydev->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(phy_ethtool_set_eee);
+
+/**
+ * phy_ethtool_set_wol - Configure Wake On LAN
+ *
+ * @phydev: target phy_device struct
+ * @wol: Configuration requested
+ */
+int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
+{
+	int ret;
+
+	if (phydev->drv && phydev->drv->set_wol) {
+		mutex_lock(&phydev->lock);
+		ret = phydev->drv->set_wol(phydev, wol);
+		mutex_unlock(&phydev->lock);
+
+		return ret;
+	}
+
+	return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL(phy_ethtool_set_wol);
+
+/**
+ * phy_ethtool_get_wol - Get the current Wake On LAN configuration
+ *
+ * @phydev: target phy_device struct
+ * @wol: Store the current configuration here
+ */
+void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
+{
+	if (phydev->drv && phydev->drv->get_wol) {
+		mutex_lock(&phydev->lock);
+		phydev->drv->get_wol(phydev, wol);
+		mutex_unlock(&phydev->lock);
+	}
+}
+EXPORT_SYMBOL(phy_ethtool_get_wol);
+
+int phy_ethtool_get_link_ksettings(struct net_device *ndev,
+				   struct ethtool_link_ksettings *cmd)
+{
+	struct phy_device *phydev = ndev->phydev;
+
+	if (!phydev)
+		return -ENODEV;
+
+	phy_ethtool_ksettings_get(phydev, cmd);
+
+	return 0;
+}
+EXPORT_SYMBOL(phy_ethtool_get_link_ksettings);
+
+int phy_ethtool_set_link_ksettings(struct net_device *ndev,
+				   const struct ethtool_link_ksettings *cmd)
+{
+	struct phy_device *phydev = ndev->phydev;
+
+	if (!phydev)
+		return -ENODEV;
+
+	return phy_ethtool_ksettings_set(phydev, cmd);
+}
+EXPORT_SYMBOL(phy_ethtool_set_link_ksettings);
+
+/**
+ * phy_ethtool_nway_reset - Restart auto negotiation
+ * @ndev: Network device to restart autoneg for
+ */
+int phy_ethtool_nway_reset(struct net_device *ndev)
+{
+	struct phy_device *phydev = ndev->phydev;
+	int ret;
+
+	if (!phydev)
+		return -ENODEV;
+
+	if (!phydev->drv)
+		return -EIO;
+
+	mutex_lock(&phydev->lock);
+	ret = phy_restart_aneg(phydev);
+	mutex_unlock(&phydev->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(phy_ethtool_nway_reset);