Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 506 insertions, 0 deletions

diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
new file mode 100644
index 000000000..ac7481ce2
--- /dev/null
+++ b/drivers/net/phy/smsc.c
@@ -0,0 +1,506 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * drivers/net/phy/smsc.c
+ *
+ * Driver for SMSC PHYs
+ *
+ * Author: Herbert Valerio Riedel
+ *
+ * Copyright (c) 2006 Herbert Valerio Riedel <hvr@gnu.org>
+ *
+ * Support added for SMSC LAN8187 and LAN8700 by steve.glendinning@shawell.net
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+#include <linux/smscphy.h>
+
+/* Vendor-specific PHY Definitions */
+/* EDPD NLP / crossover time configuration */
+#define PHY_EDPD_CONFIG			16
+#define PHY_EDPD_CONFIG_EXT_CROSSOVER_	0x0001
+
+/* Control/Status Indication Register */
+#define SPECIAL_CTRL_STS		27
+#define SPECIAL_CTRL_STS_OVRRD_AMDIX_	0x8000
+#define SPECIAL_CTRL_STS_AMDIX_ENABLE_	0x4000
+#define SPECIAL_CTRL_STS_AMDIX_STATE_	0x2000
+
+struct smsc_hw_stat {
+	const char *string;
+	u8 reg;
+	u8 bits;
+};
+
+static struct smsc_hw_stat smsc_hw_stats[] = {
+	{ "phy_symbol_errors", 26, 16},
+};
+
+struct smsc_phy_priv {
+	u16 intmask;
+	bool energy_enable;
+};
+
+static int smsc_phy_ack_interrupt(struct phy_device *phydev)
+{
+	int rc = phy_read(phydev, MII_LAN83C185_ISF);
+
+	return rc < 0 ? rc : 0;
+}
+
+static int smsc_phy_config_intr(struct phy_device *phydev)
+{
+	struct smsc_phy_priv *priv = phydev->priv;
+	int rc;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		rc = smsc_phy_ack_interrupt(phydev);
+		if (rc)
+			return rc;
+
+		priv->intmask = MII_LAN83C185_ISF_INT4 | MII_LAN83C185_ISF_INT6;
+		if (priv->energy_enable)
+			priv->intmask |= MII_LAN83C185_ISF_INT7;
+
+		rc = phy_write(phydev, MII_LAN83C185_IM, priv->intmask);
+	} else {
+		priv->intmask = 0;
+
+		rc = phy_write(phydev, MII_LAN83C185_IM, 0);
+		if (rc)
+			return rc;
+
+		rc = smsc_phy_ack_interrupt(phydev);
+	}
+
+	return rc < 0 ? rc : 0;
+}
+
+static irqreturn_t smsc_phy_handle_interrupt(struct phy_device *phydev)
+{
+	struct smsc_phy_priv *priv = phydev->priv;
+	int irq_status;
+
+	irq_status = phy_read(phydev, MII_LAN83C185_ISF);
+	if (irq_status < 0) {
+		if (irq_status != -ENODEV)
+			phy_error(phydev);
+
+		return IRQ_NONE;
+	}
+
+	if (!(irq_status & priv->intmask))
+		return IRQ_NONE;
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
+static int smsc_phy_config_init(struct phy_device *phydev)
+{
+	struct smsc_phy_priv *priv = phydev->priv;
+	int rc;
+
+	if (!priv->energy_enable || phydev->irq != PHY_POLL)
+		return 0;
+
+	rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
+
+	if (rc < 0)
+		return rc;
+
+	/* Enable energy detect mode for this SMSC Transceivers */
+	rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
+		       rc | MII_LAN83C185_EDPWRDOWN);
+	return rc;
+}
+
+static int smsc_phy_reset(struct phy_device *phydev)
+{
+	int rc = phy_read(phydev, MII_LAN83C185_SPECIAL_MODES);
+	if (rc < 0)
+		return rc;
+
+	/* If the SMSC PHY is in power down mode, then set it
+	 * in all capable mode before using it.
+	 */
+	if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) {
+		/* set "all capable" mode */
+		rc |= MII_LAN83C185_MODE_ALL;
+		phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc);
+	}
+
+	/* reset the phy */
+	return genphy_soft_reset(phydev);
+}
+
+static int lan87xx_config_aneg(struct phy_device *phydev)
+{
+	int rc;
+	int val;
+
+	switch (phydev->mdix_ctrl) {
+	case ETH_TP_MDI:
+		val = SPECIAL_CTRL_STS_OVRRD_AMDIX_;
+		break;
+	case ETH_TP_MDI_X:
+		val = SPECIAL_CTRL_STS_OVRRD_AMDIX_ |
+			SPECIAL_CTRL_STS_AMDIX_STATE_;
+		break;
+	case ETH_TP_MDI_AUTO:
+		val = SPECIAL_CTRL_STS_AMDIX_ENABLE_;
+		break;
+	default:
+		return genphy_config_aneg(phydev);
+	}
+
+	rc = phy_read(phydev, SPECIAL_CTRL_STS);
+	if (rc < 0)
+		return rc;
+
+	rc &= ~(SPECIAL_CTRL_STS_OVRRD_AMDIX_ |
+		SPECIAL_CTRL_STS_AMDIX_ENABLE_ |
+		SPECIAL_CTRL_STS_AMDIX_STATE_);
+	rc |= val;
+	phy_write(phydev, SPECIAL_CTRL_STS, rc);
+
+	phydev->mdix = phydev->mdix_ctrl;
+	return genphy_config_aneg(phydev);
+}
+
+static int lan95xx_config_aneg_ext(struct phy_device *phydev)
+{
+	int rc;
+
+	if (phydev->phy_id != 0x0007c0f0) /* not (LAN9500A or LAN9505A) */
+		return lan87xx_config_aneg(phydev);
+
+	/* Extend Manual AutoMDIX timer */
+	rc = phy_read(phydev, PHY_EDPD_CONFIG);
+	if (rc < 0)
+		return rc;
+
+	rc |= PHY_EDPD_CONFIG_EXT_CROSSOVER_;
+	phy_write(phydev, PHY_EDPD_CONFIG, rc);
+	return lan87xx_config_aneg(phydev);
+}
+
+/*
+ * The LAN87xx suffers from rare absence of the ENERGYON-bit when Ethernet cable
+ * plugs in while LAN87xx is in Energy Detect Power-Down mode. This leads to
+ * unstable detection of plugging in Ethernet cable.
+ * This workaround disables Energy Detect Power-Down mode and waiting for
+ * response on link pulses to detect presence of plugged Ethernet cable.
+ * The Energy Detect Power-Down mode is enabled again in the end of procedure to
+ * save approximately 220 mW of power if cable is unplugged.
+ * The workaround is only applicable to poll mode. Energy Detect Power-Down may
+ * not be used in interrupt mode lest link change detection becomes unreliable.
+ */
+static int lan87xx_read_status(struct phy_device *phydev)
+{
+	struct smsc_phy_priv *priv = phydev->priv;
+
+	int err = genphy_read_status(phydev);
+
+	if (!phydev->link && priv->energy_enable && phydev->irq == PHY_POLL) {
+		/* Disable EDPD to wake up PHY */
+		int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
+		if (rc < 0)
+			return rc;
+
+		rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
+			       rc & ~MII_LAN83C185_EDPWRDOWN);
+		if (rc < 0)
+			return rc;
+
+		/* Wait max 640 ms to detect energy and the timeout is not
+		 * an actual error.
+		 */
+		read_poll_timeout(phy_read, rc,
+				  rc & MII_LAN83C185_ENERGYON || rc < 0,
+				  10000, 640000, true, phydev,
+				  MII_LAN83C185_CTRL_STATUS);
+		if (rc < 0)
+			return rc;
+
+		/* Re-enable EDPD */
+		rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
+		if (rc < 0)
+			return rc;
+
+		rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
+			       rc | MII_LAN83C185_EDPWRDOWN);
+		if (rc < 0)
+			return rc;
+	}
+
+	return err;
+}
+
+static int smsc_get_sset_count(struct phy_device *phydev)
+{
+	return ARRAY_SIZE(smsc_hw_stats);
+}
+
+static void smsc_get_strings(struct phy_device *phydev, u8 *data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(smsc_hw_stats); i++) {
+		strncpy(data + i * ETH_GSTRING_LEN,
+		       smsc_hw_stats[i].string, ETH_GSTRING_LEN);
+	}
+}
+
+static u64 smsc_get_stat(struct phy_device *phydev, int i)
+{
+	struct smsc_hw_stat stat = smsc_hw_stats[i];
+	int val;
+	u64 ret;
+
+	val = phy_read(phydev, stat.reg);
+	if (val < 0)
+		ret = U64_MAX;
+	else
+		ret = val;
+
+	return ret;
+}
+
+static void smsc_get_stats(struct phy_device *phydev,
+			   struct ethtool_stats *stats, u64 *data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(smsc_hw_stats); i++)
+		data[i] = smsc_get_stat(phydev, i);
+}
+
+static int smsc_phy_probe(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct device_node *of_node = dev->of_node;
+	struct smsc_phy_priv *priv;
+	struct clk *refclk;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->energy_enable = true;
+
+	if (of_property_read_bool(of_node, "smsc,disable-energy-detect"))
+		priv->energy_enable = false;
+
+	phydev->priv = priv;
+
+	/* Make clk optional to keep DTB backward compatibility. */
+	refclk = devm_clk_get_optional_enabled(dev, NULL);
+	if (IS_ERR(refclk))
+		return dev_err_probe(dev, PTR_ERR(refclk),
+				     "Failed to request clock\n");
+
+	return clk_set_rate(refclk, 50 * 1000 * 1000);
+}
+
+static struct phy_driver smsc_phy_driver[] = {
+{
+	.phy_id		= 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "SMSC LAN83C185",
+
+	/* PHY_BASIC_FEATURES */
+
+	.probe		= smsc_phy_probe,
+
+	/* basic functions */
+	.config_init	= smsc_phy_config_init,
+	.soft_reset	= smsc_phy_reset,
+
+	/* IRQ related */
+	.config_intr	= smsc_phy_config_intr,
+	.handle_interrupt = smsc_phy_handle_interrupt,
+
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+}, {
+	.phy_id		= 0x0007c0b0, /* OUI=0x00800f, Model#=0x0b */
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "SMSC LAN8187",
+
+	/* PHY_BASIC_FEATURES */
+
+	.probe		= smsc_phy_probe,
+
+	/* basic functions */
+	.config_init	= smsc_phy_config_init,
+	.soft_reset	= smsc_phy_reset,
+
+	/* IRQ related */
+	.config_intr	= smsc_phy_config_intr,
+	.handle_interrupt = smsc_phy_handle_interrupt,
+
+	/* Statistics */
+	.get_sset_count = smsc_get_sset_count,
+	.get_strings	= smsc_get_strings,
+	.get_stats	= smsc_get_stats,
+
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+}, {
+	/* This covers internal PHY (phy_id: 0x0007C0C3) for
+	 * LAN9500 (PID: 0x9500), LAN9514 (PID: 0xec00), LAN9505 (PID: 0x9505)
+	 */
+	.phy_id		= 0x0007c0c0, /* OUI=0x00800f, Model#=0x0c */
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "SMSC LAN8700",
+
+	/* PHY_BASIC_FEATURES */
+
+	.probe		= smsc_phy_probe,
+
+	/* basic functions */
+	.read_status	= lan87xx_read_status,
+	.config_init	= smsc_phy_config_init,
+	.soft_reset	= smsc_phy_reset,
+	.config_aneg	= lan87xx_config_aneg,
+
+	/* IRQ related */
+	.config_intr	= smsc_phy_config_intr,
+	.handle_interrupt = smsc_phy_handle_interrupt,
+
+	/* Statistics */
+	.get_sset_count = smsc_get_sset_count,
+	.get_strings	= smsc_get_strings,
+	.get_stats	= smsc_get_stats,
+
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+}, {
+	.phy_id		= 0x0007c0d0, /* OUI=0x00800f, Model#=0x0d */
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "SMSC LAN911x Internal PHY",
+
+	/* PHY_BASIC_FEATURES */
+
+	.probe		= smsc_phy_probe,
+
+	/* IRQ related */
+	.config_intr	= smsc_phy_config_intr,
+	.handle_interrupt = smsc_phy_handle_interrupt,
+
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+}, {
+	/* This covers internal PHY (phy_id: 0x0007C0F0) for
+	 * LAN9500A (PID: 0x9E00), LAN9505A (PID: 0x9E01)
+	 */
+	.phy_id		= 0x0007c0f0, /* OUI=0x00800f, Model#=0x0f */
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "SMSC LAN8710/LAN8720",
+
+	/* PHY_BASIC_FEATURES */
+
+	.probe		= smsc_phy_probe,
+
+	/* basic functions */
+	.read_status	= lan87xx_read_status,
+	.config_init	= smsc_phy_config_init,
+	.soft_reset	= smsc_phy_reset,
+	.config_aneg	= lan95xx_config_aneg_ext,
+
+	/* IRQ related */
+	.config_intr	= smsc_phy_config_intr,
+	.handle_interrupt = smsc_phy_handle_interrupt,
+
+	/* Statistics */
+	.get_sset_count = smsc_get_sset_count,
+	.get_strings	= smsc_get_strings,
+	.get_stats	= smsc_get_stats,
+
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+}, {
+	.phy_id		= 0x0007c110,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "SMSC LAN8740",
+
+	/* PHY_BASIC_FEATURES */
+	.flags		= PHY_RST_AFTER_CLK_EN,
+
+	.probe		= smsc_phy_probe,
+
+	/* basic functions */
+	.read_status	= lan87xx_read_status,
+	.config_init	= smsc_phy_config_init,
+	.soft_reset	= smsc_phy_reset,
+
+	/* IRQ related */
+	.config_intr	= smsc_phy_config_intr,
+	.handle_interrupt = smsc_phy_handle_interrupt,
+
+	/* Statistics */
+	.get_sset_count = smsc_get_sset_count,
+	.get_strings	= smsc_get_strings,
+	.get_stats	= smsc_get_stats,
+
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+}, {
+	.phy_id		= 0x0007c130,	/* 0x0007c130 and 0x0007c131 */
+	/* This mask (0xfffffff2) is to differentiate from
+	 * LAN88xx (phy_id 0x0007c132)
+	 * and allows future phy_id revisions.
+	 */
+	.phy_id_mask	= 0xfffffff2,
+	.name		= "Microchip LAN8742",
+
+	/* PHY_BASIC_FEATURES */
+	.flags		= PHY_RST_AFTER_CLK_EN,
+
+	.probe		= smsc_phy_probe,
+
+	/* basic functions */
+	.read_status	= lan87xx_read_status,
+	.config_init	= smsc_phy_config_init,
+	.soft_reset	= smsc_phy_reset,
+
+	/* IRQ related */
+	.config_intr	= smsc_phy_config_intr,
+	.handle_interrupt = smsc_phy_handle_interrupt,
+
+	/* Statistics */
+	.get_sset_count = smsc_get_sset_count,
+	.get_strings	= smsc_get_strings,
+	.get_stats	= smsc_get_stats,
+
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+} };
+
+module_phy_driver(smsc_phy_driver);
+
+MODULE_DESCRIPTION("SMSC PHY driver");
+MODULE_AUTHOR("Herbert Valerio Riedel");
+MODULE_LICENSE("GPL");
+
+static struct mdio_device_id __maybe_unused smsc_tbl[] = {
+	{ 0x0007c0a0, 0xfffffff0 },
+	{ 0x0007c0b0, 0xfffffff0 },
+	{ 0x0007c0c0, 0xfffffff0 },
+	{ 0x0007c0d0, 0xfffffff0 },
+	{ 0x0007c0f0, 0xfffffff0 },
+	{ 0x0007c110, 0xfffffff0 },
+	{ 0x0007c130, 0xfffffff2 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, smsc_tbl);