aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/usb/smsc95xx.c
diff options
context:
space:
mode:
authorLibravatar Linus Torvalds <torvalds@linux-foundation.org>2023-02-21 18:24:12 -0800
committerLibravatar Linus Torvalds <torvalds@linux-foundation.org>2023-02-21 18:24:12 -0800
commit5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 (patch)
treecc5c2d0a898769fd59549594fedb3ee6f84e59a0 /drivers/net/usb/smsc95xx.c
downloadlinux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.tar.gz
linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.zip
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted
Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ...
Diffstat (limited to 'drivers/net/usb/smsc95xx.c')
-rw-r--r--drivers/net/usb/smsc95xx.c2125
1 files changed, 2125 insertions, 0 deletions
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
new file mode 100644
index 000000000..32d2c60d3
--- /dev/null
+++ b/drivers/net/usb/smsc95xx.c
@@ -0,0 +1,2125 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+ /***************************************************************************
+ *
+ * Copyright (C) 2007-2008 SMSC
+ *
+ *****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/bitrev.h>
+#include <linux/crc16.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
+#include <linux/of_net.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mdio.h>
+#include <linux/phy.h>
+#include <net/selftests.h>
+
+#include "smsc95xx.h"
+
+#define SMSC_CHIPNAME "smsc95xx"
+#define SMSC_DRIVER_VERSION "2.0.0"
+#define HS_USB_PKT_SIZE (512)
+#define FS_USB_PKT_SIZE (64)
+#define DEFAULT_HS_BURST_CAP_SIZE (16 * 1024 + 5 * HS_USB_PKT_SIZE)
+#define DEFAULT_FS_BURST_CAP_SIZE (6 * 1024 + 33 * FS_USB_PKT_SIZE)
+#define DEFAULT_BULK_IN_DELAY (0x00002000)
+#define MAX_SINGLE_PACKET_SIZE (2048)
+#define LAN95XX_EEPROM_MAGIC (0x9500)
+#define EEPROM_MAC_OFFSET (0x01)
+#define DEFAULT_TX_CSUM_ENABLE (true)
+#define DEFAULT_RX_CSUM_ENABLE (true)
+#define SMSC95XX_INTERNAL_PHY_ID (1)
+#define SMSC95XX_TX_OVERHEAD (8)
+#define SMSC95XX_TX_OVERHEAD_CSUM (12)
+#define SUPPORTED_WAKE (WAKE_PHY | WAKE_UCAST | WAKE_BCAST | \
+ WAKE_MCAST | WAKE_ARP | WAKE_MAGIC)
+
+#define FEATURE_8_WAKEUP_FILTERS (0x01)
+#define FEATURE_PHY_NLP_CROSSOVER (0x02)
+#define FEATURE_REMOTE_WAKEUP (0x04)
+
+#define SUSPEND_SUSPEND0 (0x01)
+#define SUSPEND_SUSPEND1 (0x02)
+#define SUSPEND_SUSPEND2 (0x04)
+#define SUSPEND_SUSPEND3 (0x08)
+#define SUSPEND_ALLMODES (SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \
+ SUSPEND_SUSPEND2 | SUSPEND_SUSPEND3)
+
+#define SMSC95XX_NR_IRQS (1) /* raise to 12 for GPIOs */
+#define PHY_HWIRQ (SMSC95XX_NR_IRQS - 1)
+
+struct smsc95xx_priv {
+ u32 mac_cr;
+ u32 hash_hi;
+ u32 hash_lo;
+ u32 wolopts;
+ spinlock_t mac_cr_lock;
+ u8 features;
+ u8 suspend_flags;
+ bool is_internal_phy;
+ struct irq_chip irqchip;
+ struct irq_domain *irqdomain;
+ struct fwnode_handle *irqfwnode;
+ struct mii_bus *mdiobus;
+ struct phy_device *phydev;
+ struct task_struct *pm_task;
+};
+
+static bool turbo_mode = true;
+module_param(turbo_mode, bool, 0644);
+MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
+
+static int __must_check smsc95xx_read_reg(struct usbnet *dev, u32 index,
+ u32 *data)
+{
+ struct smsc95xx_priv *pdata = dev->driver_priv;
+ u32 buf;
+ int ret;
+ int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
+
+ if (current != pdata->pm_task)
+ fn = usbnet_read_cmd;
+ else
+ fn = usbnet_read_cmd_nopm;
+
+ ret = fn(dev, USB_VENDOR_REQUEST_READ_REGISTER, USB_DIR_IN
+ | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, index, &buf, 4);
+ if (ret < 0) {
+ if (ret != -ENODEV)
+ netdev_warn(dev->net, "Failed to read reg index 0x%08x: %d\n",
+ index, ret);
+ return ret;
+ }
+
+ le32_to_cpus(&buf);
+ *data = buf;
+
+ return ret;
+}
+
+static int __must_check smsc95xx_write_reg(struct usbnet *dev, u32 index,
+ u32 data)
+{
+ struct smsc95xx_priv *pdata = dev->driver_priv;
+ u32 buf;
+ int ret;
+ int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
+
+ if (current != pdata->pm_task)
+ fn = usbnet_write_cmd;
+ else
+ fn = usbnet_write_cmd_nopm;
+
+ buf = data;
+ cpu_to_le32s(&buf);
+
+ ret = fn(dev, USB_VENDOR_REQUEST_WRITE_REGISTER, USB_DIR_OUT
+ | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, index, &buf, 4);
+ if (ret < 0 && ret != -ENODEV)
+ netdev_warn(dev->net, "Failed to write reg index 0x%08x: %d\n",
+ index, ret);
+
+ return ret;
+}
+
+/* Loop until the read is completed with timeout
+ * called with phy_mutex held */
+static int __must_check smsc95xx_phy_wait_not_busy(struct usbnet *dev)
+{
+ unsigned long start_time = jiffies;
+ u32 val;
+ int ret;
+
+ do {
+ ret = smsc95xx_read_reg(dev, MII_ADDR, &val);
+ if (ret < 0) {
+ /* Ignore -ENODEV error during disconnect() */
+ if (ret == -ENODEV)
+ return 0;
+ netdev_warn(dev->net, "Error reading MII_ACCESS\n");
+ return ret;
+ }
+
+ if (!(val & MII_BUSY_))
+ return 0;
+ } while (!time_after(jiffies, start_time + HZ));
+
+ return -EIO;
+}
+
+static u32 mii_address_cmd(int phy_id, int idx, u16 op)
+{
+ return (phy_id & 0x1f) << 11 | (idx & 0x1f) << 6 | op;
+}
+
+static int smsc95xx_mdio_read(struct usbnet *dev, int phy_id, int idx)
+{
+ u32 val, addr;
+ int ret;
+
+ mutex_lock(&dev->phy_mutex);
+
+ /* confirm MII not busy */
+ ret = smsc95xx_phy_wait_not_busy(dev);
+ if (ret < 0) {
+ netdev_warn(dev->net, "%s: MII is busy\n", __func__);
+ goto done;
+ }
+
+ /* set the address, index & direction (read from PHY) */
+ addr = mii_address_cmd(phy_id, idx, MII_READ_ | MII_BUSY_);
+ ret = smsc95xx_write_reg(dev, MII_ADDR, addr);
+ if (ret < 0) {
+ if (ret != -ENODEV)
+ netdev_warn(dev->net, "Error writing MII_ADDR\n");
+ goto done;
+ }
+
+ ret = smsc95xx_phy_wait_not_busy(dev);
+ if (ret < 0) {
+ netdev_warn(dev->net, "Timed out reading MII reg %02X\n", idx);
+ goto done;
+ }
+
+ ret = smsc95xx_read_reg(dev, MII_DATA, &val);
+ if (ret < 0) {
+ if (ret != -ENODEV)
+ netdev_warn(dev->net, "Error reading MII_DATA\n");
+ goto done;
+ }
+
+ ret = (u16)(val & 0xFFFF);
+
+done:
+ mutex_unlock(&dev->phy_mutex);
+
+ /* Ignore -ENODEV error during disconnect() */
+ if (ret == -ENODEV)
+ return 0;
+ return ret;
+}
+
+static void smsc95xx_mdio_write(struct usbnet *dev, int phy_id, int idx,
+ int regval)
+{
+ u32 val, addr;
+ int ret;
+
+ mutex_lock(&dev->phy_mutex);
+
+ /* confirm MII not busy */
+ ret = smsc95xx_phy_wait_not_busy(dev);
+ if (ret < 0) {
+ netdev_warn(dev->net, "%s: MII is busy\n", __func__);
+ goto done;
+ }
+
+ val = regval;
+ ret = smsc95xx_write_reg(dev, MII_DATA, val);
+ if (ret < 0) {
+ if (ret != -ENODEV)
+ netdev_warn(dev->net, "Error writing MII_DATA\n");
+ goto done;
+ }
+
+ /* set the address, index & direction (write to PHY) */
+ addr = mii_address_cmd(phy_id, idx, MII_WRITE_ | MII_BUSY_);
+ ret = smsc95xx_write_reg(dev, MII_ADDR, addr);
+ if (ret < 0) {
+ if (ret != -ENODEV)
+ netdev_warn(dev->net, "Error writing MII_ADDR\n");
+ goto done;
+ }
+
+ ret = smsc95xx_phy_wait_not_busy(dev);
+ if (ret < 0) {
+ netdev_warn(dev->net, "Timed out writing MII reg %02X\n", idx);
+ goto done;
+ }
+
+done:
+ mutex_unlock(&dev->phy_mutex);
+}
+
+static int smsc95xx_mdiobus_reset(struct mii_bus *bus)
+{
+ struct smsc95xx_priv *pdata;
+ struct usbnet *dev;
+ u32 val;
+ int ret;
+
+ dev = bus->priv;
+ pdata = dev->driver_priv;
+
+ if (pdata->is_internal_phy)
+ return 0;
+
+ mutex_lock(&dev->phy_mutex);
+
+ ret = smsc95xx_read_reg(dev, PM_CTRL, &val);
+ if (ret < 0)
+ goto reset_out;
+
+ val |= PM_CTL_PHY_RST_;
+
+ ret = smsc95xx_write_reg(dev, PM_CTRL, val);
+ if (ret < 0)
+ goto reset_out;
+
+ /* Driver has no knowledge at this point about the external PHY.
+ * The 802.3 specifies that the reset process shall
+ * be completed within 0.5 s.
+ */
+ fsleep(500000);
+
+reset_out:
+ mutex_unlock(&dev->phy_mutex);
+
+ return 0;
+}
+
+static int smsc95xx_mdiobus_read(struct mii_bus *bus, int phy_id, int idx)
+{
+ struct usbnet *dev = bus->priv;
+
+ return smsc95xx_mdio_read(dev, phy_id, idx);
+}
+
+static int smsc95xx_mdiobus_write(struct mii_bus *bus, int phy_id, int idx,
+ u16 regval)
+{
+ struct usbnet *dev = bus->priv;
+
+ smsc95xx_mdio_write(dev, phy_id, idx, regval);
+ return 0;
+}
+
+static int __must_check smsc95xx_wait_eeprom(struct usbnet *dev)
+{
+ unsigned long start_time = jiffies;
+ u32 val;
+ int ret;
+
+ do {
+ ret = smsc95xx_read_reg(dev, E2P_CMD, &val);
+ if (ret < 0) {
+ netdev_warn(dev->net, "Error reading E2P_CMD\n");
+ return ret;
+ }
+
+ if (!(val & E2P_CMD_BUSY_) || (val & E2P_CMD_TIMEOUT_))
+ break;
+ udelay(40);
+ } while (!time_after(jiffies, start_time + HZ));
+
+ if (val & (E2P_CMD_TIMEOUT_ | E2P_CMD_BUSY_)) {
+ netdev_warn(dev->net, "EEPROM read operation timeout\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int __must_check smsc95xx_eeprom_confirm_not_busy(struct usbnet *dev)
+{
+ unsigned long start_time = jiffies;
+ u32 val;
+ int ret;
+
+ do {
+ ret = smsc95xx_read_reg(dev, E2P_CMD, &val);
+ if (ret < 0) {
+ netdev_warn(dev->net, "Error reading E2P_CMD\n");
+ return ret;
+ }
+
+ if (!(val & E2P_CMD_BUSY_))
+ return 0;
+
+ udelay(40);
+ } while (!time_after(jiffies, start_time + HZ));
+
+ netdev_warn(dev->net, "EEPROM is busy\n");
+ return -EIO;
+}
+
+static int smsc95xx_read_eeprom(struct usbnet *dev, u32 offset, u32 length,
+ u8 *data)
+{
+ u32 val;
+ int i, ret;
+
+ BUG_ON(!dev);
+ BUG_ON(!data);
+
+ ret = smsc95xx_eeprom_confirm_not_busy(dev);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < length; i++) {
+ val = E2P_CMD_BUSY_ | E2P_CMD_READ_ | (offset & E2P_CMD_ADDR_);
+ ret = smsc95xx_write_reg(dev, E2P_CMD, val);
+ if (ret < 0) {
+ netdev_warn(dev->net, "Error writing E2P_CMD\n");
+ return ret;
+ }
+
+ ret = smsc95xx_wait_eeprom(dev);
+ if (ret < 0)
+ return ret;
+
+ ret = smsc95xx_read_reg(dev, E2P_DATA, &val);
+ if (ret < 0) {
+ netdev_warn(dev->net, "Error reading E2P_DATA\n");
+ return ret;
+ }
+
+ data[i] = val & 0xFF;
+ offset++;
+ }
+
+ return 0;
+}
+
+static int smsc95xx_write_eeprom(struct usbnet *dev, u32 offset, u32 length,
+ u8 *data)
+{
+ u32 val;
+ int i, ret;
+
+ BUG_ON(!dev);
+ BUG_ON(!data);
+
+ ret = smsc95xx_eeprom_confirm_not_busy(dev);
+ if (ret)
+ return ret;
+
+ /* Issue write/erase enable command */
+ val = E2P_CMD_BUSY_ | E2P_CMD_EWEN_;
+ ret = smsc95xx_write_reg(dev, E2P_CMD, val);
+ if (ret < 0) {
+ netdev_warn(dev->net, "Error writing E2P_DATA\n");
+ return ret;
+ }
+
+ ret = smsc95xx_wait_eeprom(dev);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < length; i++) {
+
+ /* Fill data register */
+ val = data[i];
+ ret = smsc95xx_write_reg(dev, E2P_DATA, val);
+ if (ret < 0) {
+ netdev_warn(dev->net, "Error writing E2P_DATA\n");
+ return ret;
+ }
+
+ /* Send "write" command */
+ val = E2P_CMD_BUSY_ | E2P_CMD_WRITE_ | (offset & E2P_CMD_ADDR_);
+ ret = smsc95xx_write_reg(dev, E2P_CMD, val);
+ if (ret < 0) {
+ netdev_warn(dev->net, "Error writing E2P_CMD\n");
+ return ret;
+ }
+
+ ret = smsc95xx_wait_eeprom(dev);
+ if (ret < 0)
+ return ret;
+
+ offset++;
+ }
+
+ return 0;
+}
+
+static int __must_check smsc95xx_write_reg_async(struct usbnet *dev, u16 index,
+ u32 data)
+{
+ const u16 size = 4;
+ u32 buf;
+ int ret;
+
+ buf = data;
+ cpu_to_le32s(&buf);
+
+ ret = usbnet_write_cmd_async(dev, USB_VENDOR_REQUEST_WRITE_REGISTER,
+ USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE,
+ 0, index, &buf, size);
+ if (ret < 0)
+ netdev_warn(dev->net, "Error write async cmd, sts=%d\n",
+ ret);
+ return ret;
+}
+
+/* returns hash bit number for given MAC address
+ * example:
+ * 01 00 5E 00 00 01 -> returns bit number 31 */
+static unsigned int smsc95xx_hash(char addr[ETH_ALEN])
+{
+ return (ether_crc(ETH_ALEN, addr) >> 26) & 0x3f;
+}
+
+static void smsc95xx_set_multicast(struct net_device *netdev)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+ struct smsc95xx_priv *pdata = dev->driver_priv;
+ unsigned long flags;
+ int ret;
+
+ pdata->hash_hi = 0;
+ pdata->hash_lo = 0;
+
+ spin_lock_irqsave(&pdata->mac_cr_lock, flags);
+
+ if (dev->net->flags & IFF_PROMISC) {
+ netif_dbg(dev, drv, dev->net, "promiscuous mode enabled\n");
+ pdata->mac_cr |= MAC_CR_PRMS_;
+ pdata->mac_cr &= ~(MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
+ } else if (dev->net->flags & IFF_ALLMULTI) {
+ netif_dbg(dev, drv, dev->net, "receive all multicast enabled\n");
+ pdata->mac_cr |= MAC_CR_MCPAS_;
+ pdata->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_HPFILT_);
+ } else if (!netdev_mc_empty(dev->net)) {
+ struct netdev_hw_addr *ha;
+
+ pdata->mac_cr |= MAC_CR_HPFILT_;
+ pdata->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_);
+
+ netdev_for_each_mc_addr(ha, netdev) {
+ u32 bitnum = smsc95xx_hash(ha->addr);
+ u32 mask = 0x01 << (bitnum & 0x1F);
+ if (bitnum & 0x20)
+ pdata->hash_hi |= mask;
+ else
+ pdata->hash_lo |= mask;
+ }
+
+ netif_dbg(dev, drv, dev->net, "HASHH=0x%08X, HASHL=0x%08X\n",
+ pdata->hash_hi, pdata->hash_lo);
+ } else {
+ netif_dbg(dev, drv, dev->net, "receive own packets only\n");
+ pdata->mac_cr &=
+ ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
+ }
+
+ spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
+
+ /* Initiate async writes, as we can't wait for completion here */
+ ret = smsc95xx_write_reg_async(dev, HASHH, pdata->hash_hi);
+ if (ret < 0)
+ netdev_warn(dev->net, "failed to initiate async write to HASHH\n");
+
+ ret = smsc95xx_write_reg_async(dev, HASHL, pdata->hash_lo);
+ if (ret < 0)
+ netdev_warn(dev->net, "failed to initiate async write to HASHL\n");
+
+ ret = smsc95xx_write_reg_async(dev, MAC_CR, pdata->mac_cr);
+ if (ret < 0)
+ netdev_warn(dev->net, "failed to initiate async write to MAC_CR\n");
+}
+
+static int smsc95xx_phy_update_flowcontrol(struct usbnet *dev)
+{
+ u32 flow = 0, afc_cfg;
+ struct smsc95xx_priv *pdata = dev->driver_priv;
+ bool tx_pause, rx_pause;
+
+ int ret = smsc95xx_read_reg(dev, AFC_CFG, &afc_cfg);
+ if (ret < 0)
+ return ret;
+
+ if (pdata->phydev->duplex == DUPLEX_FULL) {
+ phy_get_pause(pdata->phydev, &tx_pause, &rx_pause);
+
+ if (rx_pause)
+ flow = 0xFFFF0002;
+
+ if (tx_pause) {
+ afc_cfg |= 0xF;
+ flow |= 0xFFFF0000;
+ } else {
+ afc_cfg &= ~0xF;
+ }
+
+ netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s\n",
+ rx_pause ? "enabled" : "disabled",
+ tx_pause ? "enabled" : "disabled");
+ } else {
+ netif_dbg(dev, link, dev->net, "half duplex\n");
+ afc_cfg |= 0xF;
+ }
+
+ ret = smsc95xx_write_reg(dev, FLOW, flow);
+ if (ret < 0)
+ return ret;
+
+ return smsc95xx_write_reg(dev, AFC_CFG, afc_cfg);
+}
+
+static void smsc95xx_mac_update_fullduplex(struct usbnet *dev)
+{
+ struct smsc95xx_priv *pdata = dev->driver_priv;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&pdata->mac_cr_lock, flags);
+ if (pdata->phydev->duplex != DUPLEX_FULL) {
+ pdata->mac_cr &= ~MAC_CR_FDPX_;
+ pdata->mac_cr |= MAC_CR_RCVOWN_;
+ } else {
+ pdata->mac_cr &= ~MAC_CR_RCVOWN_;
+ pdata->mac_cr |= MAC_CR_FDPX_;
+ }
+ spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
+
+ ret = smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr);
+ if (ret < 0) {
+ if (ret != -ENODEV)
+ netdev_warn(dev->net,
+ "Error updating MAC full duplex mode\n");
+ return;
+ }
+
+ ret = smsc95xx_phy_update_flowcontrol(dev);
+ if (ret < 0)
+ netdev_warn(dev->net, "Error updating PHY flow control\n");
+}
+
+static void smsc95xx_status(struct usbnet *dev, struct urb *urb)
+{
+ struct smsc95xx_priv *pdata = dev->driver_priv;
+ unsigned long flags;
+ u32 intdata;
+
+ if (urb->actual_length != 4) {
+ netdev_warn(dev->net, "unexpected urb length %d\n",
+ urb->actual_length);
+ return;
+ }
+
+ intdata = get_unaligned_le32(urb->transfer_buffer);
+ netif_dbg(dev, link, dev->net, "intdata: 0x%08X\n", intdata);
+
+ local_irq_save(flags);
+
+ if (intdata & INT_ENP_PHY_INT_)
+ generic_handle_domain_irq(pdata->irqdomain, PHY_HWIRQ);
+ else
+ netdev_warn(dev->net, "unexpected interrupt, intdata=0x%08X\n",
+ intdata);
+
+ local_irq_restore(flags);
+}
+
+/* Enable or disable Tx & Rx checksum offload engines */
+static int smsc95xx_set_features(struct net_device *netdev,
+ netdev_features_t features)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+ u32 read_buf;
+ int ret;
+
+ ret = smsc95xx_read_reg(dev, COE_CR, &read_buf);
+ if (ret < 0)
+ return ret;
+
+ if (features & NETIF_F_IP_CSUM)
+ read_buf |= Tx_COE_EN_;
+ else
+ read_buf &= ~Tx_COE_EN_;
+
+ if (features & NETIF_F_RXCSUM)
+ read_buf |= Rx_COE_EN_;
+ else
+ read_buf &= ~Rx_COE_EN_;
+
+ ret = smsc95xx_write_reg(dev, COE_CR, read_buf);
+ if (ret < 0)
+ return ret;
+
+ netif_dbg(dev, hw, dev->net, "COE_CR = 0x%08x\n", read_buf);
+ return 0;
+}
+
+static int smsc95xx_ethtool_get_eeprom_len(struct net_device *net)
+{
+ return MAX_EEPROM_SIZE;
+}
+
+static int smsc95xx_ethtool_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *ee, u8 *data)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+
+ ee->magic = LAN95XX_EEPROM_MAGIC;
+
+ return smsc95xx_read_eeprom(dev, ee->offset, ee->len, data);
+}
+
+static int smsc95xx_ethtool_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *ee, u8 *data)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+
+ if (ee->magic != LAN95XX_EEPROM_MAGIC) {
+ netdev_warn(dev->net, "EEPROM: magic value mismatch, magic = 0x%x\n",
+ ee->magic);
+ return -EINVAL;
+ }
+
+ return smsc95xx_write_eeprom(dev, ee->offset, ee->len, data);
+}
+
+static int smsc95xx_ethtool_getregslen(struct net_device *netdev)
+{
+ /* all smsc95xx registers */
+ return COE_CR - ID_REV + sizeof(u32);
+}
+
+static void
+smsc95xx_ethtool_getregs(struct net_device *netdev, struct ethtool_regs *regs,
+ void *buf)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+ unsigned int i, j;
+ int retval;
+ u32 *data = buf;
+
+ retval = smsc95xx_read_reg(dev, ID_REV, &regs->version);
+ if (retval < 0) {
+ netdev_warn(netdev, "REGS: cannot read ID_REV\n");
+ return;
+ }
+
+ for (i = ID_REV, j = 0; i <= COE_CR; i += (sizeof(u32)), j++) {
+ retval = smsc95xx_read_reg(dev, i, &data[j]);
+ if (retval < 0) {
+ netdev_warn(netdev, "REGS: cannot read reg[%x]\n", i);
+ return;
+ }
+ }
+}
+
+static void smsc95xx_ethtool_get_wol(struct net_device *net,
+ struct ethtool_wolinfo *wolinfo)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct smsc95xx_priv *pdata = dev->driver_priv;
+
+ wolinfo->supported = SUPPORTED_WAKE;
+ wolinfo->wolopts = pdata->wolopts;
+}
+
+static int smsc95xx_ethtool_set_wol(struct net_device *net,
+ struct ethtool_wolinfo *wolinfo)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct smsc95xx_priv *pdata = dev->driver_priv;
+ int ret;
+
+ if (wolinfo->wolopts & ~SUPPORTED_WAKE)
+ return -EINVAL;
+
+ pdata->wolopts = wolinfo->wolopts & SUPPORTED_WAKE;
+
+ ret = device_set_wakeup_enable(&dev->udev->dev, pdata->wolopts);
+ if (ret < 0)
+ netdev_warn(dev->net, "device_set_wakeup_enable error %d\n", ret);
+
+ return ret;
+}
+
+static u32 smsc95xx_get_link(struct net_device *net)
+{
+ phy_read_status(net->phydev);
+ return net->phydev->link;
+}
+
+static void smsc95xx_ethtool_get_strings(struct net_device *netdev, u32 sset,
+ u8 *data)
+{
+ switch (sset) {
+ case ETH_SS_TEST:
+ net_selftest_get_strings(data);
+ break;
+ }
+}
+
+static int smsc95xx_ethtool_get_sset_count(struct net_device *ndev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_TEST:
+ return net_selftest_get_count();
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static const struct ethtool_ops smsc95xx_ethtool_ops = {
+ .get_link = smsc95xx_get_link,
+ .nway_reset = phy_ethtool_nway_reset,
+ .get_drvinfo = usbnet_get_drvinfo,
+ .get_msglevel = usbnet_get_msglevel,
+ .set_msglevel = usbnet_set_msglevel,
+ .get_eeprom_len = smsc95xx_ethtool_get_eeprom_len,
+ .get_eeprom = smsc95xx_ethtool_get_eeprom,
+ .set_eeprom = smsc95xx_ethtool_set_eeprom,
+ .get_regs_len = smsc95xx_ethtool_getregslen,
+ .get_regs = smsc95xx_ethtool_getregs,
+ .get_wol = smsc95xx_ethtool_get_wol,
+ .set_wol = smsc95xx_ethtool_set_wol,
+ .get_link_ksettings = phy_ethtool_get_link_ksettings,
+ .set_link_ksettings = phy_ethtool_set_link_ksettings,
+ .get_ts_info = ethtool_op_get_ts_info,
+ .self_test = net_selftest,
+ .get_strings = smsc95xx_ethtool_get_strings,
+ .get_sset_count = smsc95xx_ethtool_get_sset_count,
+};
+
+static int smsc95xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+{
+ if (!netif_running(netdev))
+ return -EINVAL;
+
+ return phy_mii_ioctl(netdev->phydev, rq, cmd);
+}
+
+static void smsc95xx_init_mac_address(struct usbnet *dev)
+{
+ u8 addr[ETH_ALEN];
+
+ /* maybe the boot loader passed the MAC address in devicetree */
+ if (!platform_get_ethdev_address(&dev->udev->dev, dev->net)) {
+ if (is_valid_ether_addr(dev->net->dev_addr)) {
+ /* device tree values are valid so use them */
+ netif_dbg(dev, ifup, dev->net, "MAC address read from the device tree\n");
+ return;
+ }
+ }
+
+ /* try reading mac address from EEPROM */
+ if (smsc95xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN, addr) == 0) {
+ eth_hw_addr_set(dev->net, addr);
+ if (is_valid_ether_addr(dev->net->dev_addr)) {
+ /* eeprom values are valid so use them */
+ netif_dbg(dev, ifup, dev->net, "MAC address read from EEPROM\n");
+ return;
+ }
+ }
+
+ /* no useful static MAC address found. generate a random one */
+ eth_hw_addr_random(dev->net);
+ netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr\n");
+}
+
+static int smsc95xx_set_mac_address(struct usbnet *dev)
+{
+ u32 addr_lo = dev->net->dev_addr[0] | dev->net->dev_addr[1] << 8 |
+ dev->net->dev_addr[2] << 16 | dev->net->dev_addr[3] << 24;
+ u32 addr_hi = dev->net->dev_addr[4] | dev->net->dev_addr[5] << 8;
+ int ret;
+
+ ret = smsc95xx_write_reg(dev, ADDRL, addr_lo);
+ if (ret < 0)
+ return ret;
+
+ return smsc95xx_write_reg(dev, ADDRH, addr_hi);
+}
+
+/* starts the TX path */
+static int smsc95xx_start_tx_path(struct usbnet *dev)
+{
+ struct smsc95xx_priv *pdata = dev->driver_priv;
+ unsigned long flags;
+ int ret;
+
+ /* Enable Tx at MAC */
+ spin_lock_irqsave(&pdata->mac_cr_lock, flags);
+ pdata->mac_cr |= MAC_CR_TXEN_;
+ spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
+
+ ret = smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr);
+ if (ret < 0)
+ return ret;
+
+ /* Enable Tx at SCSRs */
+ return smsc95xx_write_reg(dev, TX_CFG, TX_CFG_ON_);
+}
+
+/* Starts the Receive path */
+static int smsc95xx_start_rx_path(struct usbnet *dev)
+{
+ struct smsc95xx_priv *pdata = dev->driver_priv;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pdata->mac_cr_lock, flags);
+ pdata->mac_cr |= MAC_CR_RXEN_;
+ spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
+
+ return smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr);
+}
+
+static int smsc95xx_reset(struct usbnet *dev)
+{
+ struct smsc95xx_priv *pdata = dev->driver_priv;
+ u32 read_buf, write_buf, burst_cap;
+ int ret = 0, timeout;
+
+ netif_dbg(dev, ifup, dev->net, "entering smsc95xx_reset\n");
+
+ ret = smsc95xx_write_reg(dev, HW_CFG, HW_CFG_LRST_);
+ if (ret < 0)
+ return ret;
+
+ timeout = 0;
+ do {
+ msleep(10);
+ ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+ if (ret < 0)
+ return ret;
+ timeout++;
+ } while ((read_buf & HW_CFG_LRST_) && (timeout < 100));
+
+ if (timeout >= 100) {
+ netdev_warn(dev->net, "timeout waiting for completion of Lite Reset\n");
+ return ret;
+ }
+
+ ret = smsc95xx_set_mac_address(dev);
+ if (ret < 0)
+ return ret;
+
+ netif_dbg(dev, ifup, dev->net, "MAC Address: %pM\n",
+ dev->net->dev_addr);
+
+ ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+ if (ret < 0)
+ return ret;
+
+ netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x\n",
+ read_buf);
+
+ read_buf |= HW_CFG_BIR_;
+
+ ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
+ if (ret < 0)
+ return ret;
+
+ ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+ if (ret < 0)
+ return ret;
+
+ netif_dbg(dev, ifup, dev->net,
+ "Read Value from HW_CFG after writing HW_CFG_BIR_: 0x%08x\n",
+ read_buf);
+
+ if (!turbo_mode) {
+ burst_cap = 0;
+ dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE;
+ } else if (dev->udev->speed == USB_SPEED_HIGH) {
+ burst_cap = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
+ dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE;
+ } else {
+ burst_cap = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
+ dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
+ }
+
+ netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld\n",
+ (ulong)dev->rx_urb_size);
+
+ ret = smsc95xx_write_reg(dev, BURST_CAP, burst_cap);
+ if (ret < 0)
+ return ret;
+
+ ret = smsc95xx_read_reg(dev, BURST_CAP, &read_buf);
+ if (ret < 0)
+ return ret;
+
+ netif_dbg(dev, ifup, dev->net,
+ "Read Value from BURST_CAP after writing: 0x%08x\n",
+ read_buf);
+
+ ret = smsc95xx_write_reg(dev, BULK_IN_DLY, DEFAULT_BULK_IN_DELAY);
+ if (ret < 0)
+ return ret;
+
+ ret = smsc95xx_read_reg(dev, BULK_IN_DLY, &read_buf);
+ if (ret < 0)
+ return ret;
+
+ netif_dbg(dev, ifup, dev->net,
+ "Read Value from BULK_IN_DLY after writing: 0x%08x\n",
+ read_buf);
+
+ ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+ if (ret < 0)
+ return ret;
+
+ netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG: 0x%08x\n",
+ read_buf);
+
+ if (turbo_mode)
+ read_buf |= (HW_CFG_MEF_ | HW_CFG_BCE_);
+
+ read_buf &= ~HW_CFG_RXDOFF_;
+
+ /* set Rx data offset=2, Make IP header aligns on word boundary. */
+ read_buf |= NET_IP_ALIGN << 9;
+
+ ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
+ if (ret < 0)
+ return ret;
+
+ ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+ if (ret < 0)
+ return ret;
+
+ netif_dbg(dev, ifup, dev->net,
+ "Read Value from HW_CFG after writing: 0x%08x\n", read_buf);
+
+ ret = smsc95xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL_);
+ if (ret < 0)
+ return ret;
+
+ ret = smsc95xx_read_reg(dev, ID_REV, &read_buf);
+ if (ret < 0)
+ return ret;
+ netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x\n", read_buf);
+
+ /* Configure GPIO pins as LED outputs */
+ write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED |
+ LED_GPIO_CFG_FDX_LED;
+ ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf);
+ if (ret < 0)
+ return ret;
+
+ /* Init Tx */
+ ret = smsc95xx_write_reg(dev, FLOW, 0);
+ if (ret < 0)
+ return ret;
+
+ ret = smsc95xx_write_reg(dev, AFC_CFG, AFC_CFG_DEFAULT);
+ if (ret < 0)
+ return ret;
+
+ /* Don't need mac_cr_lock during initialisation */
+ ret = smsc95xx_read_reg(dev, MAC_CR, &pdata->mac_cr);
+ if (ret < 0)
+ return ret;
+
+ /* Init Rx */
+ /* Set Vlan */
+ ret = smsc95xx_write_reg(dev, VLAN1, (u32)ETH_P_8021Q);
+ if (ret < 0)
+ return ret;
+
+ /* Enable or disable checksum offload engines */
+ ret = smsc95xx_set_features(dev->net, dev->net->features);
+ if (ret < 0) {
+ netdev_warn(dev->net, "Failed to set checksum offload features\n");
+ return ret;
+ }
+
+ smsc95xx_set_multicast(dev->net);
+
+ ret = smsc95xx_read_reg(dev, INT_EP_CTL, &read_buf);
+ if (ret < 0)
+ return ret;
+
+ /* enable PHY interrupts */
+ read_buf |= INT_EP_CTL_PHY_INT_;
+
+ ret = smsc95xx_write_reg(dev, INT_EP_CTL, read_buf);
+ if (ret < 0)
+ return ret;
+
+ ret = smsc95xx_start_tx_path(dev);
+ if (ret < 0) {
+ netdev_warn(dev->net, "Failed to start TX path\n");
+ return ret;
+ }
+
+ ret = smsc95xx_start_rx_path(dev);
+ if (ret < 0) {
+ netdev_warn(dev->net, "Failed to start RX path\n");
+ return ret;
+ }
+
+ netif_dbg(dev, ifup, dev->net, "smsc95xx_reset, return 0\n");
+ return 0;
+}
+
+static const struct net_device_ops smsc95xx_netdev_ops = {
+ .ndo_open = usbnet_open,
+ .ndo_stop = usbnet_stop,
+ .ndo_start_xmit = usbnet_start_xmit,
+ .ndo_tx_timeout = usbnet_tx_timeout,
+ .ndo_change_mtu = usbnet_change_mtu,
+ .ndo_get_stats64 = dev_get_tstats64,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_eth_ioctl = smsc95xx_ioctl,
+ .ndo_set_rx_mode = smsc95xx_set_multicast,
+ .ndo_set_features = smsc95xx_set_features,
+};
+
+static void smsc95xx_handle_link_change(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ phy_print_status(net->phydev);
+ smsc95xx_mac_update_fullduplex(dev);
+ usbnet_defer_kevent(dev, EVENT_LINK_CHANGE);
+}
+
+static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ struct smsc95xx_priv *pdata;
+ char usb_path[64];
+ int ret, phy_irq;
+ u32 val;
+
+ printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n");
+
+ ret = usbnet_get_endpoints(dev, intf);
+ if (ret < 0) {
+ netdev_warn(dev->net, "usbnet_get_endpoints failed: %d\n", ret);
+ return ret;
+ }
+
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ dev->driver_priv = pdata;
+
+ spin_lock_init(&pdata->mac_cr_lock);
+
+ /* LAN95xx devices do not alter the computed checksum of 0 to 0xffff.
+ * RFC 2460, ipv6 UDP calculated checksum yields a result of zero must
+ * be changed to 0xffff. RFC 768, ipv4 UDP computed checksum is zero,
+ * it is transmitted as all ones. The zero transmitted checksum means
+ * transmitter generated no checksum. Hence, enable csum offload only
+ * for ipv4 packets.
+ */
+ if (DEFAULT_TX_CSUM_ENABLE)
+ dev->net->features |= NETIF_F_IP_CSUM;
+ if (DEFAULT_RX_CSUM_ENABLE)
+ dev->net->features |= NETIF_F_RXCSUM;
+
+ dev->net->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
+ set_bit(EVENT_NO_IP_ALIGN, &dev->flags);
+
+ smsc95xx_init_mac_address(dev);
+
+ /* Init all registers */
+ ret = smsc95xx_reset(dev);
+ if (ret)
+ goto free_pdata;
+
+ /* create irq domain for use by PHY driver and GPIO consumers */
+ usb_make_path(dev->udev, usb_path, sizeof(usb_path));
+ pdata->irqfwnode = irq_domain_alloc_named_fwnode(usb_path);
+ if (!pdata->irqfwnode) {
+ ret = -ENOMEM;
+ goto free_pdata;
+ }
+
+ pdata->irqdomain = irq_domain_create_linear(pdata->irqfwnode,
+ SMSC95XX_NR_IRQS,
+ &irq_domain_simple_ops,
+ pdata);
+ if (!pdata->irqdomain) {
+ ret = -ENOMEM;
+ goto free_irqfwnode;
+ }
+
+ phy_irq = irq_create_mapping(pdata->irqdomain, PHY_HWIRQ);
+ if (!phy_irq) {
+ ret = -ENOENT;
+ goto remove_irqdomain;
+ }
+
+ pdata->irqchip = dummy_irq_chip;
+ pdata->irqchip.name = SMSC_CHIPNAME;
+ irq_set_chip_and_handler_name(phy_irq, &pdata->irqchip,
+ handle_simple_irq, "phy");
+
+ pdata->mdiobus = mdiobus_alloc();
+ if (!pdata->mdiobus) {
+ ret = -ENOMEM;
+ goto dispose_irq;
+ }
+
+ ret = smsc95xx_read_reg(dev, HW_CFG, &val);
+ if (ret < 0)
+ goto free_mdio;
+
+ pdata->is_internal_phy = !(val & HW_CFG_PSEL_);
+ if (pdata->is_internal_phy)
+ pdata->mdiobus->phy_mask = ~(1u << SMSC95XX_INTERNAL_PHY_ID);
+
+ pdata->mdiobus->priv = dev;
+ pdata->mdiobus->read = smsc95xx_mdiobus_read;
+ pdata->mdiobus->write = smsc95xx_mdiobus_write;
+ pdata->mdiobus->reset = smsc95xx_mdiobus_reset;
+ pdata->mdiobus->name = "smsc95xx-mdiobus";
+ pdata->mdiobus->parent = &dev->udev->dev;
+
+ snprintf(pdata->mdiobus->id, ARRAY_SIZE(pdata->mdiobus->id),
+ "usb-%03d:%03d", dev->udev->bus->busnum, dev->udev->devnum);
+
+ ret = mdiobus_register(pdata->mdiobus);
+ if (ret) {
+ netdev_err(dev->net, "Could not register MDIO bus\n");
+ goto free_mdio;
+ }
+
+ pdata->phydev = phy_find_first(pdata->mdiobus);
+ if (!pdata->phydev) {
+ netdev_err(dev->net, "no PHY found\n");
+ ret = -ENODEV;
+ goto unregister_mdio;
+ }
+
+ pdata->phydev->irq = phy_irq;
+ pdata->phydev->is_internal = pdata->is_internal_phy;
+
+ /* detect device revision as different features may be available */
+ ret = smsc95xx_read_reg(dev, ID_REV, &val);
+ if (ret < 0)
+ goto unregister_mdio;
+
+ val >>= 16;
+ if ((val == ID_REV_CHIP_ID_9500A_) || (val == ID_REV_CHIP_ID_9530_) ||
+ (val == ID_REV_CHIP_ID_89530_) || (val == ID_REV_CHIP_ID_9730_))
+ pdata->features = (FEATURE_8_WAKEUP_FILTERS |
+ FEATURE_PHY_NLP_CROSSOVER |
+ FEATURE_REMOTE_WAKEUP);
+ else if (val == ID_REV_CHIP_ID_9512_)
+ pdata->features = FEATURE_8_WAKEUP_FILTERS;
+
+ dev->net->netdev_ops = &smsc95xx_netdev_ops;
+ dev->net->ethtool_ops = &smsc95xx_ethtool_ops;
+ dev->net->flags |= IFF_MULTICAST;
+ dev->net->hard_header_len += SMSC95XX_TX_OVERHEAD_CSUM;
+ dev->net->min_mtu = ETH_MIN_MTU;
+ dev->net->max_mtu = ETH_DATA_LEN;
+ dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+
+ ret = phy_connect_direct(dev->net, pdata->phydev,
+ &smsc95xx_handle_link_change,
+ PHY_INTERFACE_MODE_MII);
+ if (ret) {
+ netdev_err(dev->net, "can't attach PHY to %s\n", pdata->mdiobus->id);
+ goto unregister_mdio;
+ }
+
+ phy_attached_info(dev->net->phydev);
+
+ return 0;
+
+unregister_mdio:
+ mdiobus_unregister(pdata->mdiobus);
+
+free_mdio:
+ mdiobus_free(pdata->mdiobus);
+
+dispose_irq:
+ irq_dispose_mapping(phy_irq);
+
+remove_irqdomain:
+ irq_domain_remove(pdata->irqdomain);
+
+free_irqfwnode:
+ irq_domain_free_fwnode(pdata->irqfwnode);
+
+free_pdata:
+ kfree(pdata);
+ return ret;
+}
+
+static void smsc95xx_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+ struct smsc95xx_priv *pdata = dev->driver_priv;
+
+ phy_disconnect(dev->net->phydev);
+ mdiobus_unregister(pdata->mdiobus);
+ mdiobus_free(pdata->mdiobus);
+ irq_dispose_mapping(irq_find_mapping(pdata->irqdomain, PHY_HWIRQ));
+ irq_domain_remove(pdata->irqdomain);
+ irq_domain_free_fwnode(pdata->irqfwnode);
+ netif_dbg(dev, ifdown, dev->net, "free pdata\n");
+ kfree(pdata);
+}
+
+static int smsc95xx_start_phy(struct usbnet *dev)
+{
+ phy_start(dev->net->phydev);
+
+ return 0;
+}
+
+static int smsc95xx_stop(struct usbnet *dev)
+{
+ phy_stop(dev->net->phydev);
+
+ return 0;
+}
+
+static u32 smsc_crc(const u8 *buffer, size_t len, int filter)
+{
+ u32 crc = bitrev16(crc16(0xFFFF, buffer, len));
+ return crc << ((filter % 2) * 16);
+}
+
+static int smsc95xx_link_ok(struct usbnet *dev)
+{
+ struct smsc95xx_priv *pdata = dev->driver_priv;
+ int ret;
+
+ /* first, a dummy read, needed to latch some MII phys */
+ ret = smsc95xx_mdio_read(dev, pdata->phydev->mdio.addr, MII_BMSR);
+ if (ret < 0)
+ return ret;
+
+ ret = smsc95xx_mdio_read(dev, pdata->phydev->mdio.addr, MII_BMSR);
+ if (ret < 0)
+ return ret;
+
+ return !!(ret & BMSR_LSTATUS);
+}
+
+static int smsc95xx_enter_suspend0(struct usbnet *dev)
+{
+ struct smsc95xx_priv *pdata = dev->driver_priv;
+ u32 val;
+ int ret;
+
+ ret = smsc95xx_read_reg(dev, PM_CTRL, &val);
+ if (ret < 0)
+ return ret;
+
+ val &= (~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_));
+ val |= PM_CTL_SUS_MODE_0;
+
+ ret = smsc95xx_write_reg(dev, PM_CTRL, val);
+ if (ret < 0)
+ return ret;
+
+ /* clear wol status */
+ val &= ~PM_CTL_WUPS_;
+ val |= PM_CTL_WUPS_WOL_;
+
+ /* enable energy detection */
+ if (pdata->wolopts & WAKE_PHY)
+ val |= PM_CTL_WUPS_ED_;
+
+ ret = smsc95xx_write_reg(dev, PM_CTRL, val);
+ if (ret < 0)
+ return ret;
+
+ /* read back PM_CTRL */
+ ret = smsc95xx_read_reg(dev, PM_CTRL, &val);
+ if (ret < 0)
+ return ret;
+
+ pdata->suspend_flags |= SUSPEND_SUSPEND0;
+
+ return 0;
+}
+
+static int smsc95xx_enter_suspend1(struct usbnet *dev)
+{
+ struct smsc95xx_priv *pdata = dev->driver_priv;
+ int ret, phy_id = pdata->phydev->mdio.addr;
+ u32 val;
+
+ /* reconfigure link pulse detection timing for
+ * compatibility with non-standard link partners
+ */
+ if (pdata->features & FEATURE_PHY_NLP_CROSSOVER)
+ smsc95xx_mdio_write(dev, phy_id, PHY_EDPD_CONFIG,
+ PHY_EDPD_CONFIG_DEFAULT);
+
+ /* enable energy detect power-down mode */
+ ret = smsc95xx_mdio_read(dev, phy_id, PHY_MODE_CTRL_STS);
+ if (ret < 0)
+ return ret;
+
+ ret |= MODE_CTRL_STS_EDPWRDOWN_;
+
+ smsc95xx_mdio_write(dev, phy_id, PHY_MODE_CTRL_STS, ret);
+
+ /* enter SUSPEND1 mode */
+ ret = smsc95xx_read_reg(dev, PM_CTRL, &val);
+ if (ret < 0)
+ return ret;
+
+ val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_);
+ val |= PM_CTL_SUS_MODE_1;
+
+ ret = smsc95xx_write_reg(dev, PM_CTRL, val);
+ if (ret < 0)
+ return ret;
+
+ /* clear wol status, enable energy detection */
+ val &= ~PM_CTL_WUPS_;
+ val |= (PM_CTL_WUPS_ED_ | PM_CTL_ED_EN_);
+
+ ret = smsc95xx_write_reg(dev, PM_CTRL, val);
+ if (ret < 0)
+ return ret;
+
+ pdata->suspend_flags |= SUSPEND_SUSPEND1;
+
+ return 0;
+}
+
+static int smsc95xx_enter_suspend2(struct usbnet *dev)
+{
+ struct smsc95xx_priv *pdata = dev->driver_priv;
+ u32 val;
+ int ret;
+
+ ret = smsc95xx_read_reg(dev, PM_CTRL, &val);
+ if (ret < 0)
+ return ret;
+
+ val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_);
+ val |= PM_CTL_SUS_MODE_2;
+
+ ret = smsc95xx_write_reg(dev, PM_CTRL, val);
+ if (ret < 0)
+ return ret;
+
+ pdata->suspend_flags |= SUSPEND_SUSPEND2;
+
+ return 0;
+}
+
+static int smsc95xx_enter_suspend3(struct usbnet *dev)
+{
+ struct smsc95xx_priv *pdata = dev->driver_priv;
+ u32 val;
+ int ret;
+
+ ret = smsc95xx_read_reg(dev, RX_FIFO_INF, &val);
+ if (ret < 0)
+ return ret;
+
+ if (val & RX_FIFO_INF_USED_) {
+ netdev_info(dev->net, "rx fifo not empty in autosuspend\n");
+ return -EBUSY;
+ }
+
+ ret = smsc95xx_read_reg(dev, PM_CTRL, &val);
+ if (ret < 0)
+ return ret;
+
+ val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_);
+ val |= PM_CTL_SUS_MODE_3 | PM_CTL_RES_CLR_WKP_STS;
+
+ ret = smsc95xx_write_reg(dev, PM_CTRL, val);
+ if (ret < 0)
+ return ret;
+
+ /* clear wol status */
+ val &= ~PM_CTL_WUPS_;
+ val |= PM_CTL_WUPS_WOL_;
+
+ ret = smsc95xx_write_reg(dev, PM_CTRL, val);
+ if (ret < 0)
+ return ret;
+
+ pdata->suspend_flags |= SUSPEND_SUSPEND3;
+
+ return 0;
+}
+
+static int smsc95xx_autosuspend(struct usbnet *dev, u32 link_up)
+{
+ struct smsc95xx_priv *pdata = dev->driver_priv;
+
+ if (!netif_running(dev->net)) {
+ /* interface is ifconfig down so fully power down hw */
+ netdev_dbg(dev->net, "autosuspend entering SUSPEND2\n");
+ return smsc95xx_enter_suspend2(dev);
+ }
+
+ if (!link_up) {
+ /* link is down so enter EDPD mode, but only if device can
+ * reliably resume from it. This check should be redundant
+ * as current FEATURE_REMOTE_WAKEUP parts also support
+ * FEATURE_PHY_NLP_CROSSOVER but it's included for clarity */
+ if (!(pdata->features & FEATURE_PHY_NLP_CROSSOVER)) {
+ netdev_warn(dev->net, "EDPD not supported\n");
+ return -EBUSY;
+ }
+
+ netdev_dbg(dev->net, "autosuspend entering SUSPEND1\n");
+ netdev_info(dev->net, "entering SUSPEND1 mode\n");
+ return smsc95xx_enter_suspend1(dev);
+ }
+
+ netdev_dbg(dev->net, "autosuspend entering SUSPEND3\n");
+ return smsc95xx_enter_suspend3(dev);
+}
+
+static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct usbnet *dev = usb_get_intfdata(intf);
+ struct smsc95xx_priv *pdata = dev->driver_priv;
+ u32 val, link_up;
+ int ret;
+
+ pdata->pm_task = current;
+
+ ret = usbnet_suspend(intf, message);
+ if (ret < 0) {
+ netdev_warn(dev->net, "usbnet_suspend error\n");
+ pdata->pm_task = NULL;
+ return ret;
+ }
+
+ if (pdata->suspend_flags) {
+ netdev_warn(dev->net, "error during last resume\n");
+ pdata->suspend_flags = 0;
+ }
+
+ link_up = smsc95xx_link_ok(dev);
+
+ if (message.event == PM_EVENT_AUTO_SUSPEND &&
+ (pdata->features & FEATURE_REMOTE_WAKEUP)) {
+ ret = smsc95xx_autosuspend(dev, link_up);
+ goto done;
+ }
+
+ /* if we get this far we're not autosuspending */
+ /* if no wol options set, or if link is down and we're not waking on
+ * PHY activity, enter lowest power SUSPEND2 mode
+ */
+ if (!(pdata->wolopts & SUPPORTED_WAKE) ||
+ !(link_up || (pdata->wolopts & WAKE_PHY))) {
+ netdev_info(dev->net, "entering SUSPEND2 mode\n");
+
+ /* disable energy detect (link up) & wake up events */
+ ret = smsc95xx_read_reg(dev, WUCSR, &val);
+ if (ret < 0)
+ goto done;
+
+ val &= ~(WUCSR_MPEN_ | WUCSR_WAKE_EN_);
+
+ ret = smsc95xx_write_reg(dev, WUCSR, val);
+ if (ret < 0)
+ goto done;
+
+ ret = smsc95xx_read_reg(dev, PM_CTRL, &val);
+ if (ret < 0)
+ goto done;
+
+ val &= ~(PM_CTL_ED_EN_ | PM_CTL_WOL_EN_);
+
+ ret = smsc95xx_write_reg(dev, PM_CTRL, val);
+ if (ret < 0)
+ goto done;
+
+ ret = smsc95xx_enter_suspend2(dev);
+ goto done;
+ }
+
+ if (pdata->wolopts & WAKE_PHY) {
+ /* if link is down then configure EDPD and enter SUSPEND1,
+ * otherwise enter SUSPEND0 below
+ */
+ if (!link_up) {
+ netdev_info(dev->net, "entering SUSPEND1 mode\n");
+ ret = smsc95xx_enter_suspend1(dev);
+ goto done;
+ }
+ }
+
+ if (pdata->wolopts & (WAKE_BCAST | WAKE_MCAST | WAKE_ARP | WAKE_UCAST)) {
+ u32 *filter_mask = kcalloc(32, sizeof(u32), GFP_KERNEL);
+ u32 command[2];
+ u32 offset[2];
+ u32 crc[4];
+ int wuff_filter_count =
+ (pdata->features & FEATURE_8_WAKEUP_FILTERS) ?
+ LAN9500A_WUFF_NUM : LAN9500_WUFF_NUM;
+ int i, filter = 0;
+
+ if (!filter_mask) {
+ netdev_warn(dev->net, "Unable to allocate filter_mask\n");
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ memset(command, 0, sizeof(command));
+ memset(offset, 0, sizeof(offset));
+ memset(crc, 0, sizeof(crc));
+
+ if (pdata->wolopts & WAKE_BCAST) {
+ const u8 bcast[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
+ netdev_info(dev->net, "enabling broadcast detection\n");
+ filter_mask[filter * 4] = 0x003F;
+ filter_mask[filter * 4 + 1] = 0x00;
+ filter_mask[filter * 4 + 2] = 0x00;
+ filter_mask[filter * 4 + 3] = 0x00;
+ command[filter/4] |= 0x05UL << ((filter % 4) * 8);
+ offset[filter/4] |= 0x00 << ((filter % 4) * 8);
+ crc[filter/2] |= smsc_crc(bcast, 6, filter);
+ filter++;
+ }
+
+ if (pdata->wolopts & WAKE_MCAST) {
+ const u8 mcast[] = {0x01, 0x00, 0x5E};
+ netdev_info(dev->net, "enabling multicast detection\n");
+ filter_mask[filter * 4] = 0x0007;
+ filter_mask[filter * 4 + 1] = 0x00;
+ filter_mask[filter * 4 + 2] = 0x00;
+ filter_mask[filter * 4 + 3] = 0x00;
+ command[filter/4] |= 0x09UL << ((filter % 4) * 8);
+ offset[filter/4] |= 0x00 << ((filter % 4) * 8);
+ crc[filter/2] |= smsc_crc(mcast, 3, filter);
+ filter++;
+ }
+
+ if (pdata->wolopts & WAKE_ARP) {
+ const u8 arp[] = {0x08, 0x06};
+ netdev_info(dev->net, "enabling ARP detection\n");
+ filter_mask[filter * 4] = 0x0003;
+ filter_mask[filter * 4 + 1] = 0x00;
+ filter_mask[filter * 4 + 2] = 0x00;
+ filter_mask[filter * 4 + 3] = 0x00;
+ command[filter/4] |= 0x05UL << ((filter % 4) * 8);
+ offset[filter/4] |= 0x0C << ((filter % 4) * 8);
+ crc[filter/2] |= smsc_crc(arp, 2, filter);
+ filter++;
+ }
+
+ if (pdata->wolopts & WAKE_UCAST) {
+ netdev_info(dev->net, "enabling unicast detection\n");
+ filter_mask[filter * 4] = 0x003F;
+ filter_mask[filter * 4 + 1] = 0x00;
+ filter_mask[filter * 4 + 2] = 0x00;
+ filter_mask[filter * 4 + 3] = 0x00;
+ command[filter/4] |= 0x01UL << ((filter % 4) * 8);
+ offset[filter/4] |= 0x00 << ((filter % 4) * 8);
+ crc[filter/2] |= smsc_crc(dev->net->dev_addr, ETH_ALEN, filter);
+ filter++;
+ }
+
+ for (i = 0; i < (wuff_filter_count * 4); i++) {
+ ret = smsc95xx_write_reg(dev, WUFF, filter_mask[i]);
+ if (ret < 0) {
+ kfree(filter_mask);
+ goto done;
+ }
+ }
+ kfree(filter_mask);
+
+ for (i = 0; i < (wuff_filter_count / 4); i++) {
+ ret = smsc95xx_write_reg(dev, WUFF, command[i]);
+ if (ret < 0)
+ goto done;
+ }
+
+ for (i = 0; i < (wuff_filter_count / 4); i++) {
+ ret = smsc95xx_write_reg(dev, WUFF, offset[i]);
+ if (ret < 0)
+ goto done;
+ }
+
+ for (i = 0; i < (wuff_filter_count / 2); i++) {
+ ret = smsc95xx_write_reg(dev, WUFF, crc[i]);
+ if (ret < 0)
+ goto done;
+ }
+
+ /* clear any pending pattern match packet status */
+ ret = smsc95xx_read_reg(dev, WUCSR, &val);
+ if (ret < 0)
+ goto done;
+
+ val |= WUCSR_WUFR_;
+
+ ret = smsc95xx_write_reg(dev, WUCSR, val);
+ if (ret < 0)
+ goto done;
+ }
+
+ if (pdata->wolopts & WAKE_MAGIC) {
+ /* clear any pending magic packet status */
+ ret = smsc95xx_read_reg(dev, WUCSR, &val);
+ if (ret < 0)
+ goto done;
+
+ val |= WUCSR_MPR_;
+
+ ret = smsc95xx_write_reg(dev, WUCSR, val);
+ if (ret < 0)
+ goto done;
+ }
+
+ /* enable/disable wakeup sources */
+ ret = smsc95xx_read_reg(dev, WUCSR, &val);
+ if (ret < 0)
+ goto done;
+
+ if (pdata->wolopts & (WAKE_BCAST | WAKE_MCAST | WAKE_ARP | WAKE_UCAST)) {
+ netdev_info(dev->net, "enabling pattern match wakeup\n");
+ val |= WUCSR_WAKE_EN_;
+ } else {
+ netdev_info(dev->net, "disabling pattern match wakeup\n");
+ val &= ~WUCSR_WAKE_EN_;
+ }
+
+ if (pdata->wolopts & WAKE_MAGIC) {
+ netdev_info(dev->net, "enabling magic packet wakeup\n");
+ val |= WUCSR_MPEN_;
+ } else {
+ netdev_info(dev->net, "disabling magic packet wakeup\n");
+ val &= ~WUCSR_MPEN_;
+ }
+
+ ret = smsc95xx_write_reg(dev, WUCSR, val);
+ if (ret < 0)
+ goto done;
+
+ /* enable wol wakeup source */
+ ret = smsc95xx_read_reg(dev, PM_CTRL, &val);
+ if (ret < 0)
+ goto done;
+
+ val |= PM_CTL_WOL_EN_;
+
+ /* phy energy detect wakeup source */
+ if (pdata->wolopts & WAKE_PHY)
+ val |= PM_CTL_ED_EN_;
+
+ ret = smsc95xx_write_reg(dev, PM_CTRL, val);
+ if (ret < 0)
+ goto done;
+
+ /* enable receiver to enable frame reception */
+ smsc95xx_start_rx_path(dev);
+
+ /* some wol options are enabled, so enter SUSPEND0 */
+ netdev_info(dev->net, "entering SUSPEND0 mode\n");
+ ret = smsc95xx_enter_suspend0(dev);
+
+done:
+ /*
+ * TODO: resume() might need to handle the suspend failure
+ * in system sleep
+ */
+ if (ret && PMSG_IS_AUTO(message))
+ usbnet_resume(intf);
+
+ pdata->pm_task = NULL;
+ return ret;
+}
+
+static int smsc95xx_resume(struct usb_interface *intf)
+{
+ struct usbnet *dev = usb_get_intfdata(intf);
+ struct smsc95xx_priv *pdata;
+ u8 suspend_flags;
+ int ret;
+ u32 val;
+
+ BUG_ON(!dev);
+ pdata = dev->driver_priv;
+ suspend_flags = pdata->suspend_flags;
+
+ netdev_dbg(dev->net, "resume suspend_flags=0x%02x\n", suspend_flags);
+
+ /* do this first to ensure it's cleared even in error case */
+ pdata->suspend_flags = 0;
+
+ pdata->pm_task = current;
+
+ if (suspend_flags & SUSPEND_ALLMODES) {
+ /* clear wake-up sources */
+ ret = smsc95xx_read_reg(dev, WUCSR, &val);
+ if (ret < 0)
+ goto done;
+
+ val &= ~(WUCSR_WAKE_EN_ | WUCSR_MPEN_);
+
+ ret = smsc95xx_write_reg(dev, WUCSR, val);
+ if (ret < 0)
+ goto done;
+
+ /* clear wake-up status */
+ ret = smsc95xx_read_reg(dev, PM_CTRL, &val);
+ if (ret < 0)
+ goto done;
+
+ val &= ~PM_CTL_WOL_EN_;
+ val |= PM_CTL_WUPS_;
+
+ ret = smsc95xx_write_reg(dev, PM_CTRL, val);
+ if (ret < 0)
+ goto done;
+ }
+
+ phy_init_hw(pdata->phydev);
+
+ ret = usbnet_resume(intf);
+ if (ret < 0)
+ netdev_warn(dev->net, "usbnet_resume error\n");
+
+done:
+ pdata->pm_task = NULL;
+ return ret;
+}
+
+static int smsc95xx_reset_resume(struct usb_interface *intf)
+{
+ struct usbnet *dev = usb_get_intfdata(intf);
+ struct smsc95xx_priv *pdata = dev->driver_priv;
+ int ret;
+
+ pdata->pm_task = current;
+ ret = smsc95xx_reset(dev);
+ pdata->pm_task = NULL;
+ if (ret < 0)
+ return ret;
+
+ return smsc95xx_resume(intf);
+}
+
+static void smsc95xx_rx_csum_offload(struct sk_buff *skb)
+{
+ skb->csum = *(u16 *)(skb_tail_pointer(skb) - 2);
+ skb->ip_summed = CHECKSUM_COMPLETE;
+ skb_trim(skb, skb->len - 2);
+}
+
+static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ /* This check is no longer done by usbnet */
+ if (skb->len < dev->net->hard_header_len)
+ return 0;
+
+ while (skb->len > 0) {
+ u32 header, align_count;
+ struct sk_buff *ax_skb;
+ unsigned char *packet;
+ u16 size;
+
+ header = get_unaligned_le32(skb->data);
+ skb_pull(skb, 4 + NET_IP_ALIGN);
+ packet = skb->data;
+
+ /* get the packet length */
+ size = (u16)((header & RX_STS_FL_) >> 16);
+ align_count = (4 - ((size + NET_IP_ALIGN) % 4)) % 4;
+
+ if (unlikely(header & RX_STS_ES_)) {
+ netif_dbg(dev, rx_err, dev->net,
+ "Error header=0x%08x\n", header);
+ dev->net->stats.rx_errors++;
+ dev->net->stats.rx_dropped++;
+
+ if (header & RX_STS_CRC_) {
+ dev->net->stats.rx_crc_errors++;
+ } else {
+ if (header & (RX_STS_TL_ | RX_STS_RF_))
+ dev->net->stats.rx_frame_errors++;
+
+ if ((header & RX_STS_LE_) &&
+ (!(header & RX_STS_FT_)))
+ dev->net->stats.rx_length_errors++;
+ }
+ } else {
+ /* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */
+ if (unlikely(size > (ETH_FRAME_LEN + 12))) {
+ netif_dbg(dev, rx_err, dev->net,
+ "size err header=0x%08x\n", header);
+ return 0;
+ }
+
+ /* last frame in this batch */
+ if (skb->len == size) {
+ if (dev->net->features & NETIF_F_RXCSUM)
+ smsc95xx_rx_csum_offload(skb);
+ skb_trim(skb, skb->len - 4); /* remove fcs */
+ skb->truesize = size + sizeof(struct sk_buff);
+
+ return 1;
+ }
+
+ ax_skb = skb_clone(skb, GFP_ATOMIC);
+ if (unlikely(!ax_skb)) {
+ netdev_warn(dev->net, "Error allocating skb\n");
+ return 0;
+ }
+
+ ax_skb->len = size;
+ ax_skb->data = packet;
+ skb_set_tail_pointer(ax_skb, size);
+
+ if (dev->net->features & NETIF_F_RXCSUM)
+ smsc95xx_rx_csum_offload(ax_skb);
+ skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
+ ax_skb->truesize = size + sizeof(struct sk_buff);
+
+ usbnet_skb_return(dev, ax_skb);
+ }
+
+ skb_pull(skb, size);
+
+ /* padding bytes before the next frame starts */
+ if (skb->len)
+ skb_pull(skb, align_count);
+ }
+
+ return 1;
+}
+
+static u32 smsc95xx_calc_csum_preamble(struct sk_buff *skb)
+{
+ u16 low_16 = (u16)skb_checksum_start_offset(skb);
+ u16 high_16 = low_16 + skb->csum_offset;
+ return (high_16 << 16) | low_16;
+}
+
+/* The TX CSUM won't work if the checksum lies in the last 4 bytes of the
+ * transmission. This is fairly unlikely, only seems to trigger with some
+ * short TCP ACK packets sent.
+ *
+ * Note, this calculation should probably check for the alignment of the
+ * data as well, but a straight check for csum being in the last four bytes
+ * of the packet should be ok for now.
+ */
+static bool smsc95xx_can_tx_checksum(struct sk_buff *skb)
+{
+ unsigned int len = skb->len - skb_checksum_start_offset(skb);
+
+ if (skb->len <= 45)
+ return false;
+ return skb->csum_offset < (len - (4 + 1));
+}
+
+static struct sk_buff *smsc95xx_tx_fixup(struct usbnet *dev,
+ struct sk_buff *skb, gfp_t flags)
+{
+ bool csum = skb->ip_summed == CHECKSUM_PARTIAL;
+ int overhead = csum ? SMSC95XX_TX_OVERHEAD_CSUM : SMSC95XX_TX_OVERHEAD;
+ u32 tx_cmd_a, tx_cmd_b;
+ void *ptr;
+
+ /* We do not advertise SG, so skbs should be already linearized */
+ BUG_ON(skb_shinfo(skb)->nr_frags);
+
+ /* Make writable and expand header space by overhead if required */
+ if (skb_cow_head(skb, overhead)) {
+ /* Must deallocate here as returning NULL to indicate error
+ * means the skb won't be deallocated in the caller.
+ */
+ dev_kfree_skb_any(skb);
+ return NULL;
+ }
+
+ tx_cmd_b = (u32)skb->len;
+ tx_cmd_a = tx_cmd_b | TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_;
+
+ if (csum) {
+ if (!smsc95xx_can_tx_checksum(skb)) {
+ /* workaround - hardware tx checksum does not work
+ * properly with extremely small packets */
+ long csstart = skb_checksum_start_offset(skb);
+ __wsum calc = csum_partial(skb->data + csstart,
+ skb->len - csstart, 0);
+ *((__sum16 *)(skb->data + csstart
+ + skb->csum_offset)) = csum_fold(calc);
+
+ csum = false;
+ } else {
+ u32 csum_preamble = smsc95xx_calc_csum_preamble(skb);
+ ptr = skb_push(skb, 4);
+ put_unaligned_le32(csum_preamble, ptr);
+
+ tx_cmd_a += 4;
+ tx_cmd_b += 4;
+ tx_cmd_b |= TX_CMD_B_CSUM_ENABLE;
+ }
+ }
+
+ ptr = skb_push(skb, 8);
+ put_unaligned_le32(tx_cmd_a, ptr);
+ put_unaligned_le32(tx_cmd_b, ptr+4);
+
+ return skb;
+}
+
+static int smsc95xx_manage_power(struct usbnet *dev, int on)
+{
+ struct smsc95xx_priv *pdata = dev->driver_priv;
+
+ dev->intf->needs_remote_wakeup = on;
+
+ if (pdata->features & FEATURE_REMOTE_WAKEUP)
+ return 0;
+
+ /* this chip revision isn't capable of remote wakeup */
+ netdev_info(dev->net, "hardware isn't capable of remote wakeup\n");
+
+ if (on)
+ usb_autopm_get_interface_no_resume(dev->intf);
+ else
+ usb_autopm_put_interface(dev->intf);
+
+ return 0;
+}
+
+static const struct driver_info smsc95xx_info = {
+ .description = "smsc95xx USB 2.0 Ethernet",
+ .bind = smsc95xx_bind,
+ .unbind = smsc95xx_unbind,
+ .reset = smsc95xx_reset,
+ .check_connect = smsc95xx_start_phy,
+ .stop = smsc95xx_stop,
+ .rx_fixup = smsc95xx_rx_fixup,
+ .tx_fixup = smsc95xx_tx_fixup,
+ .status = smsc95xx_status,
+ .manage_power = smsc95xx_manage_power,
+ .flags = FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR,
+};
+
+static const struct usb_device_id products[] = {
+ {
+ /* SMSC9500 USB Ethernet Device */
+ USB_DEVICE(0x0424, 0x9500),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9505 USB Ethernet Device */
+ USB_DEVICE(0x0424, 0x9505),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9500A USB Ethernet Device */
+ USB_DEVICE(0x0424, 0x9E00),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9505A USB Ethernet Device */
+ USB_DEVICE(0x0424, 0x9E01),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9512/9514 USB Hub & Ethernet Device */
+ USB_DEVICE(0x0424, 0xec00),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9500 USB Ethernet Device (SAL10) */
+ USB_DEVICE(0x0424, 0x9900),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9505 USB Ethernet Device (SAL10) */
+ USB_DEVICE(0x0424, 0x9901),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9500A USB Ethernet Device (SAL10) */
+ USB_DEVICE(0x0424, 0x9902),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9505A USB Ethernet Device (SAL10) */
+ USB_DEVICE(0x0424, 0x9903),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9512/9514 USB Hub & Ethernet Device (SAL10) */
+ USB_DEVICE(0x0424, 0x9904),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9500A USB Ethernet Device (HAL) */
+ USB_DEVICE(0x0424, 0x9905),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9505A USB Ethernet Device (HAL) */
+ USB_DEVICE(0x0424, 0x9906),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9500 USB Ethernet Device (Alternate ID) */
+ USB_DEVICE(0x0424, 0x9907),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9500A USB Ethernet Device (Alternate ID) */
+ USB_DEVICE(0x0424, 0x9908),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9512/9514 USB Hub & Ethernet Device (Alternate ID) */
+ USB_DEVICE(0x0424, 0x9909),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC LAN9530 USB Ethernet Device */
+ USB_DEVICE(0x0424, 0x9530),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC LAN9730 USB Ethernet Device */
+ USB_DEVICE(0x0424, 0x9730),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC LAN89530 USB Ethernet Device */
+ USB_DEVICE(0x0424, 0x9E08),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* Microchip's EVB-LAN8670-USB 10BASE-T1S Ethernet Device */
+ USB_DEVICE(0x184F, 0x0051),
+ .driver_info = (unsigned long)&smsc95xx_info,
+ },
+ { }, /* END */
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver smsc95xx_driver = {
+ .name = "smsc95xx",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .suspend = smsc95xx_suspend,
+ .resume = smsc95xx_resume,
+ .reset_resume = smsc95xx_reset_resume,
+ .disconnect = usbnet_disconnect,
+ .disable_hub_initiated_lpm = 1,
+ .supports_autosuspend = 1,
+};
+
+module_usb_driver(smsc95xx_driver);
+
+MODULE_AUTHOR("Nancy Lin");
+MODULE_AUTHOR("Steve Glendinning <steve.glendinning@shawell.net>");
+MODULE_DESCRIPTION("SMSC95XX USB 2.0 Ethernet Devices");
+MODULE_LICENSE("GPL");