Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 347 insertions, 0 deletions

diff --git a/drivers/net/wan/farsync.h b/drivers/net/wan/farsync.h
new file mode 100644
index 000000000..63908dbbb
--- /dev/null
+++ b/drivers/net/wan/farsync.h
@@ -0,0 +1,347 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *      FarSync X21 driver for Linux
+ *
+ *      Actually sync driver for X.21, V.35 and V.24 on FarSync T-series cards
+ *
+ *      Copyright (C) 2001 FarSite Communications Ltd.
+ *      www.farsite.co.uk
+ *
+ *      Author: R.J.Dunlop      <bob.dunlop@farsite.co.uk>
+ *
+ *      For the most part this file only contains structures and information
+ *      that is visible to applications outside the driver. Shared memory
+ *      layout etc is internal to the driver and described within farsync.c.
+ *      Overlap exists in that the values used for some fields within the
+ *      ioctl interface extend into the cards firmware interface so values in
+ *      this file may not be changed arbitrarily.
+ */
+
+/*      What's in a name
+ *
+ *      The project name for this driver is Oscar. The driver is intended to be
+ *      used with the FarSite T-Series cards (T2P & T4P) running in the high
+ *      speed frame shifter mode. This is sometimes referred to as X.21 mode
+ *      which is a complete misnomer as the card continues to support V.24 and
+ *      V.35 as well as X.21.
+ *
+ *      A short common prefix is useful for routines within the driver to avoid
+ *      conflict with other similar drivers and I chosen to use "fst_" for this
+ *      purpose (FarSite T-series).
+ *
+ *      Finally the device driver needs a short network interface name. Since
+ *      "hdlc" is already in use I've chosen the even less informative "sync"
+ *      for the present.
+ */
+#define FST_NAME                "fst"           /* In debug/info etc */
+#define FST_NDEV_NAME           "sync"          /* For net interface */
+#define FST_DEV_NAME            "farsync"       /* For misc interfaces */
+
+
+/*      User version number
+ *
+ *      This version number is incremented with each official release of the
+ *      package and is a simplified number for normal user reference.
+ *      Individual files are tracked by the version control system and may
+ *      have individual versions (or IDs) that move much faster than
+ *      the release version as individual updates are tracked.
+ */
+#define FST_USER_VERSION        "1.04"
+
+
+/*      Ioctl call command values
+ */
+#define FSTWRITE        (SIOCDEVPRIVATE+10)
+#define FSTCPURESET     (SIOCDEVPRIVATE+11)
+#define FSTCPURELEASE   (SIOCDEVPRIVATE+12)
+#define FSTGETCONF      (SIOCDEVPRIVATE+13)
+#define FSTSETCONF      (SIOCDEVPRIVATE+14)
+
+
+/*      FSTWRITE
+ *
+ *      Used to write a block of data (firmware etc) before the card is running
+ */
+struct fstioc_write {
+        unsigned int  size;
+        unsigned int  offset;
+	unsigned char data[];
+};
+
+
+/*      FSTCPURESET and FSTCPURELEASE
+ *
+ *      These take no additional data.
+ *      FSTCPURESET forces the cards CPU into a reset state and holds it there.
+ *      FSTCPURELEASE releases the CPU from this reset state allowing it to run,
+ *      the reset vector should be setup before this ioctl is run.
+ */
+
+/*      FSTGETCONF and FSTSETCONF
+ *
+ *      Get and set a card/ports configuration.
+ *      In order to allow selective setting of items and for the kernel to
+ *      indicate a partial status response the first field "valid" is a bitmask
+ *      indicating which other fields in the structure are valid.
+ *      Many of the field names in this structure match those used in the
+ *      firmware shared memory configuration interface and come originally from
+ *      the NT header file Smc.h
+ *
+ *      When used with FSTGETCONF this structure should be zeroed before use.
+ *      This is to allow for possible future expansion when some of the fields
+ *      might be used to indicate a different (expanded) structure.
+ */
+struct fstioc_info {
+        unsigned int   valid;           /* Bits of structure that are valid */
+        unsigned int   nports;          /* Number of serial ports */
+        unsigned int   type;            /* Type index of card */
+        unsigned int   state;           /* State of card */
+        unsigned int   index;           /* Index of port ioctl was issued on */
+        unsigned int   smcFirmwareVersion;
+        unsigned long  kernelVersion;   /* What Kernel version we are working with */
+        unsigned short lineInterface;   /* Physical interface type */
+        unsigned char  proto;           /* Line protocol */
+        unsigned char  internalClock;   /* 1 => internal clock, 0 => external */
+        unsigned int   lineSpeed;       /* Speed in bps */
+        unsigned int   v24IpSts;        /* V.24 control input status */
+        unsigned int   v24OpSts;        /* V.24 control output status */
+        unsigned short clockStatus;     /* lsb: 0=> present, 1=> absent */
+        unsigned short cableStatus;     /* lsb: 0=> present, 1=> absent */
+        unsigned short cardMode;        /* lsb: LED id mode */
+        unsigned short debug;           /* Debug flags */
+        unsigned char  transparentMode; /* Not used always 0 */
+        unsigned char  invertClock;     /* Invert clock feature for syncing */
+        unsigned char  startingSlot;    /* Time slot to use for start of tx */
+        unsigned char  clockSource;     /* External or internal */
+        unsigned char  framing;         /* E1, T1 or J1 */
+        unsigned char  structure;       /* unframed, double, crc4, f4, f12, */
+                                        /* f24 f72 */
+        unsigned char  interface;       /* rj48c or bnc */
+        unsigned char  coding;          /* hdb3 b8zs */
+        unsigned char  lineBuildOut;    /* 0, -7.5, -15, -22 */
+        unsigned char  equalizer;       /* short or lon haul settings */
+        unsigned char  loopMode;        /* various loopbacks */
+        unsigned char  range;           /* cable lengths */
+        unsigned char  txBufferMode;    /* tx elastic buffer depth */
+        unsigned char  rxBufferMode;    /* rx elastic buffer depth */
+        unsigned char  losThreshold;    /* Attenuation on LOS signal */
+        unsigned char  idleCode;        /* Value to send as idle timeslot */
+        unsigned int   receiveBufferDelay; /* delay thro rx buffer timeslots */
+        unsigned int   framingErrorCount; /* framing errors */
+        unsigned int   codeViolationCount; /* code violations */
+        unsigned int   crcErrorCount;   /* CRC errors */
+        int            lineAttenuation; /* in dB*/
+        unsigned short lossOfSignal;
+        unsigned short receiveRemoteAlarm;
+        unsigned short alarmIndicationSignal;
+};
+
+/* "valid" bitmask */
+#define FSTVAL_NONE     0x00000000      /* Nothing valid (firmware not running).
+                                         * Slight misnomer. In fact nports,
+                                         * type, state and index will be set
+                                         * based on hardware detected.
+                                         */
+#define FSTVAL_OMODEM   0x0000001F      /* First 5 bits correspond to the
+                                         * output status bits defined for
+                                         * v24OpSts
+                                         */
+#define FSTVAL_SPEED    0x00000020      /* internalClock, lineSpeed, clockStatus
+                                         */
+#define FSTVAL_CABLE    0x00000040      /* lineInterface, cableStatus */
+#define FSTVAL_IMODEM   0x00000080      /* v24IpSts */
+#define FSTVAL_CARD     0x00000100      /* nports, type, state, index,
+                                         * smcFirmwareVersion
+                                         */
+#define FSTVAL_PROTO    0x00000200      /* proto */
+#define FSTVAL_MODE     0x00000400      /* cardMode */
+#define FSTVAL_PHASE    0x00000800      /* Clock phase */
+#define FSTVAL_TE1      0x00001000      /* T1E1 Configuration */
+#define FSTVAL_DEBUG    0x80000000      /* debug */
+#define FSTVAL_ALL      0x00001FFF      /* Note: does not include DEBUG flag */
+
+/* "type" */
+#define FST_TYPE_NONE   0               /* Probably should never happen */
+#define FST_TYPE_T2P    1               /* T2P X21 2 port card */
+#define FST_TYPE_T4P    2               /* T4P X21 4 port card */
+#define FST_TYPE_T1U    3               /* T1U X21 1 port card */
+#define FST_TYPE_T2U    4               /* T2U X21 2 port card */
+#define FST_TYPE_T4U    5               /* T4U X21 4 port card */
+#define FST_TYPE_TE1    6               /* T1E1 X21 1 port card */
+
+/* "family" */
+#define FST_FAMILY_TXP  0               /* T2P or T4P */
+#define FST_FAMILY_TXU  1               /* T1U or T2U or T4U */
+
+/* "state" */
+#define FST_UNINIT      0               /* Raw uninitialised state following
+                                         * system startup */
+#define FST_RESET       1               /* Processor held in reset state */
+#define FST_DOWNLOAD    2               /* Card being downloaded */
+#define FST_STARTING    3               /* Released following download */
+#define FST_RUNNING     4               /* Processor running */
+#define FST_BADVERSION  5               /* Bad shared memory version detected */
+#define FST_HALTED      6               /* Processor flagged a halt */
+#define FST_IFAILED     7               /* Firmware issued initialisation failed
+                                         * interrupt
+                                         */
+/* "lineInterface" */
+#define V24             1
+#define X21             2
+#define V35             3
+#define X21D            4
+#define T1              5
+#define E1              6
+#define J1              7
+
+/* "proto" */
+#define FST_RAW         4               /* Two way raw packets */
+#define FST_GEN_HDLC    5               /* Using "Generic HDLC" module */
+
+/* "internalClock" */
+#define INTCLK          1
+#define EXTCLK          0
+
+/* "v24IpSts" bitmask */
+#define IPSTS_CTS       0x00000001      /* Clear To Send (Indicate for X.21) */
+#define IPSTS_INDICATE  IPSTS_CTS
+#define IPSTS_DSR       0x00000002      /* Data Set Ready (T2P Port A) */
+#define IPSTS_DCD       0x00000004      /* Data Carrier Detect */
+#define IPSTS_RI        0x00000008      /* Ring Indicator (T2P Port A) */
+#define IPSTS_TMI       0x00000010      /* Test Mode Indicator (Not Supported)*/
+
+/* "v24OpSts" bitmask */
+#define OPSTS_RTS       0x00000001      /* Request To Send (Control for X.21) */
+#define OPSTS_CONTROL   OPSTS_RTS
+#define OPSTS_DTR       0x00000002      /* Data Terminal Ready */
+#define OPSTS_DSRS      0x00000004      /* Data Signalling Rate Select (Not
+                                         * Supported) */
+#define OPSTS_SS        0x00000008      /* Select Standby (Not Supported) */
+#define OPSTS_LL        0x00000010      /* Maintenance Test (Not Supported) */
+
+/* "cardMode" bitmask */
+#define CARD_MODE_IDENTIFY      0x0001
+
+/* 
+ * Constants for T1/E1 configuration
+ */
+
+/*
+ * Clock source
+ */
+#define CLOCKING_SLAVE       0
+#define CLOCKING_MASTER      1
+
+/*
+ * Framing
+ */
+#define FRAMING_E1           0
+#define FRAMING_J1           1
+#define FRAMING_T1           2
+
+/*
+ * Structure
+ */
+#define STRUCTURE_UNFRAMED   0
+#define STRUCTURE_E1_DOUBLE  1
+#define STRUCTURE_E1_CRC4    2
+#define STRUCTURE_E1_CRC4M   3
+#define STRUCTURE_T1_4       4
+#define STRUCTURE_T1_12      5
+#define STRUCTURE_T1_24      6
+#define STRUCTURE_T1_72      7
+
+/*
+ * Interface
+ */
+#define INTERFACE_RJ48C      0
+#define INTERFACE_BNC        1
+
+/*
+ * Coding
+ */
+
+#define CODING_HDB3          0
+#define CODING_NRZ           1
+#define CODING_CMI           2
+#define CODING_CMI_HDB3      3
+#define CODING_CMI_B8ZS      4
+#define CODING_AMI           5
+#define CODING_AMI_ZCS       6
+#define CODING_B8ZS          7
+
+/*
+ * Line Build Out
+ */
+#define LBO_0dB              0
+#define LBO_7dB5             1
+#define LBO_15dB             2
+#define LBO_22dB5            3
+
+/*
+ * Range for long haul t1 > 655ft
+ */
+#define RANGE_0_133_FT       0
+#define RANGE_0_40_M         RANGE_0_133_FT
+#define RANGE_133_266_FT     1
+#define RANGE_40_81_M        RANGE_133_266_FT
+#define RANGE_266_399_FT     2
+#define RANGE_81_122_M       RANGE_266_399_FT
+#define RANGE_399_533_FT     3
+#define RANGE_122_162_M       RANGE_399_533_FT
+#define RANGE_533_655_FT     4
+#define RANGE_162_200_M      RANGE_533_655_FT
+/*
+ * Receive Equaliser
+ */
+#define EQUALIZER_SHORT      0
+#define EQUALIZER_LONG       1
+
+/*
+ * Loop modes
+ */
+#define LOOP_NONE            0
+#define LOOP_LOCAL           1
+#define LOOP_PAYLOAD_EXC_TS0 2
+#define LOOP_PAYLOAD_INC_TS0 3
+#define LOOP_REMOTE          4
+
+/*
+ * Buffer modes
+ */
+#define BUFFER_2_FRAME       0
+#define BUFFER_1_FRAME       1
+#define BUFFER_96_BIT        2
+#define BUFFER_NONE          3
+
+/*      Debug support
+ *
+ *      These should only be enabled for development kernels, production code
+ *      should define FST_DEBUG=0 in order to exclude the code.
+ *      Setting FST_DEBUG=1 will include all the debug code but in a disabled
+ *      state, use the FSTSETCONF ioctl to enable specific debug actions, or
+ *      FST_DEBUG can be set to prime the debug selection.
+ */
+#define FST_DEBUG       0x0000
+#if FST_DEBUG
+
+extern int fst_debug_mask;              /* Bit mask of actions to debug, bits
+                                         * listed below. Note: Bit 0 is used
+                                         * to trigger the inclusion of this
+                                         * code, without enabling any actions.
+                                         */
+#define DBG_INIT        0x0002          /* Card detection and initialisation */
+#define DBG_OPEN        0x0004          /* Open and close sequences */
+#define DBG_PCI         0x0008          /* PCI config operations */
+#define DBG_IOCTL       0x0010          /* Ioctls and other config */
+#define DBG_INTR        0x0020          /* Interrupt routines (be careful) */
+#define DBG_TX          0x0040          /* Packet transmission */
+#define DBG_RX          0x0080          /* Packet reception */
+#define DBG_CMD         0x0100          /* Port command issuing */
+
+#define DBG_ASS         0xFFFF          /* Assert like statements. Code that
+                                         * should never be reached, if you see
+                                         * one of these then I've been an ass
+                                         */
+#endif  /* FST_DEBUG */
+