Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 431 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ar5523/ar5523_hw.h b/drivers/net/wireless/ath/ar5523/ar5523_hw.h
new file mode 100644
index 000000000..0fe2c803f
--- /dev/null
+++ b/drivers/net/wireless/ath/ar5523/ar5523_hw.h
@@ -0,0 +1,431 @@
+/*
+ * Copyright (c) 2006 Damien Bergamini <damien.bergamini@free.fr>
+ * Copyright (c) 2006 Sam Leffler, Errno Consulting
+ * Copyright (c) 2007 Christoph Hellwig <hch@lst.de>
+ * Copyright (c) 2008-2009 Weongyo Jeong <weongyo@freebsd.org>
+ * Copyright (c) 2012 Pontus Fuchs <pontus.fuchs@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/* all fields are big endian */
+struct ar5523_fwblock {
+	__be32		flags;
+#define AR5523_WRITE_BLOCK	(1 << 4)
+
+	__be32	len;
+#define AR5523_MAX_FWBLOCK_SIZE	2048
+
+	__be32		total;
+	__be32		remain;
+	__be32		rxtotal;
+	__be32		pad[123];
+} __packed;
+
+#define AR5523_MAX_RXCMDSZ	1024
+#define AR5523_MAX_TXCMDSZ	1024
+
+struct ar5523_cmd_hdr {
+	__be32		len;
+	__be32		code;
+/* NB: these are defined for rev 1.5 firmware; rev 1.6 is different */
+/* messages from Host -> Target */
+#define	WDCMSG_HOST_AVAILABLE		0x01
+#define WDCMSG_BIND			0x02
+#define WDCMSG_TARGET_RESET		0x03
+#define WDCMSG_TARGET_GET_CAPABILITY	0x04
+#define WDCMSG_TARGET_SET_CONFIG	0x05
+#define WDCMSG_TARGET_GET_STATUS	0x06
+#define WDCMSG_TARGET_GET_STATS		0x07
+#define WDCMSG_TARGET_START		0x08
+#define WDCMSG_TARGET_STOP		0x09
+#define WDCMSG_TARGET_ENABLE		0x0a
+#define WDCMSG_TARGET_DISABLE		0x0b
+#define	WDCMSG_CREATE_CONNECTION	0x0c
+#define WDCMSG_UPDATE_CONNECT_ATTR	0x0d
+#define	WDCMSG_DELETE_CONNECT		0x0e
+#define	WDCMSG_SEND			0x0f
+#define WDCMSG_FLUSH			0x10
+/* messages from Target -> Host */
+#define	WDCMSG_STATS_UPDATE		0x11
+#define	WDCMSG_BMISS			0x12
+#define	WDCMSG_DEVICE_AVAIL		0x13
+#define	WDCMSG_SEND_COMPLETE		0x14
+#define	WDCMSG_DATA_AVAIL		0x15
+#define	WDCMSG_SET_PWR_MODE		0x16
+#define	WDCMSG_BMISS_ACK		0x17
+#define	WDCMSG_SET_LED_STEADY		0x18
+#define	WDCMSG_SET_LED_BLINK		0x19
+/* more messages */
+#define	WDCMSG_SETUP_BEACON_DESC	0x1a
+#define	WDCMSG_BEACON_INIT		0x1b
+#define	WDCMSG_RESET_KEY_CACHE		0x1c
+#define	WDCMSG_RESET_KEY_CACHE_ENTRY	0x1d
+#define	WDCMSG_SET_KEY_CACHE_ENTRY	0x1e
+#define	WDCMSG_SET_DECOMP_MASK		0x1f
+#define	WDCMSG_SET_REGULATORY_DOMAIN	0x20
+#define	WDCMSG_SET_LED_STATE		0x21
+#define	WDCMSG_WRITE_ASSOCID		0x22
+#define	WDCMSG_SET_STA_BEACON_TIMERS	0x23
+#define	WDCMSG_GET_TSF			0x24
+#define	WDCMSG_RESET_TSF		0x25
+#define	WDCMSG_SET_ADHOC_MODE		0x26
+#define	WDCMSG_SET_BASIC_RATE		0x27
+#define	WDCMSG_MIB_CONTROL		0x28
+#define	WDCMSG_GET_CHANNEL_DATA		0x29
+#define	WDCMSG_GET_CUR_RSSI		0x2a
+#define	WDCMSG_SET_ANTENNA_SWITCH	0x2b
+#define	WDCMSG_USE_SHORT_SLOT_TIME	0x2f
+#define	WDCMSG_SET_POWER_MODE		0x30
+#define	WDCMSG_SETUP_PSPOLL_DESC	0x31
+#define	WDCMSG_SET_RX_MULTICAST_FILTER	0x32
+#define	WDCMSG_RX_FILTER		0x33
+#define	WDCMSG_PER_CALIBRATION		0x34
+#define	WDCMSG_RESET			0x35
+#define	WDCMSG_DISABLE			0x36
+#define	WDCMSG_PHY_DISABLE		0x37
+#define	WDCMSG_SET_TX_POWER_LIMIT	0x38
+#define	WDCMSG_SET_TX_QUEUE_PARAMS	0x39
+#define	WDCMSG_SETUP_TX_QUEUE		0x3a
+#define	WDCMSG_RELEASE_TX_QUEUE		0x3b
+#define	WDCMSG_SET_DEFAULT_KEY		0x43
+
+	__u32		priv;	/* driver private data,
+				   don't care about endianess */
+	__be32		magic;
+	__be32		reserved2[4];
+};
+
+struct ar5523_cmd_host_available {
+	__be32	sw_ver_major;
+	__be32	sw_ver_minor;
+	__be32	sw_ver_patch;
+	__be32	sw_ver_build;
+} __packed;
+
+#define	ATH_SW_VER_MAJOR	1
+#define	ATH_SW_VER_MINOR	5
+#define	ATH_SW_VER_PATCH	0
+#define	ATH_SW_VER_BUILD	9999
+
+struct ar5523_chunk {
+	u8		seqnum;		/* sequence number for ordering */
+	u8		flags;
+#define	UATH_CFLAGS_FINAL	0x01	/* final chunk of a msg */
+#define	UATH_CFLAGS_RXMSG	0x02	/* chunk contains rx completion */
+#define	UATH_CFLAGS_DEBUG	0x04	/* for debugging */
+	__be16		length;		/* chunk size in bytes */
+	/* chunk data follows */
+} __packed;
+
+/*
+ * Message format for a WDCMSG_DATA_AVAIL message from Target to Host.
+ */
+struct ar5523_rx_desc {
+	__be32	len;		/* msg length including header */
+	__be32	code;		/* WDCMSG_DATA_AVAIL */
+	__be32	gennum;		/* generation number */
+	__be32	status;		/* start of RECEIVE_INFO */
+#define	UATH_STATUS_OK			0
+#define	UATH_STATUS_STOP_IN_PROGRESS	1
+#define	UATH_STATUS_CRC_ERR		2
+#define	UATH_STATUS_PHY_ERR		3
+#define	UATH_STATUS_DECRYPT_CRC_ERR	4
+#define	UATH_STATUS_DECRYPT_MIC_ERR	5
+#define	UATH_STATUS_DECOMP_ERR		6
+#define	UATH_STATUS_KEY_ERR		7
+#define	UATH_STATUS_ERR			8
+	__be32	tstamp_low;	/* low-order 32-bits of rx timestamp */
+	__be32	tstamp_high;	/* high-order 32-bits of rx timestamp */
+	__be32	framelen;	/* frame length */
+	__be32	rate;		/* rx rate code */
+	__be32	antenna;
+	__be32	rssi;
+	__be32	channel;
+	__be32	phyerror;
+	__be32	connix;		/* key table ix for bss traffic */
+	__be32	decrypterror;
+	__be32	keycachemiss;
+	__be32	pad;		/* XXX? */
+} __packed;
+
+struct ar5523_tx_desc {
+	__be32	msglen;
+	u32	msgid;		/* msg id (supplied by host) */
+	__be32	type;		/* opcode: WDMSG_SEND or WDCMSG_FLUSH */
+	__be32	txqid;		/* tx queue id and flags */
+#define	UATH_TXQID_MASK		0x0f
+#define	UATH_TXQID_MINRATE	0x10	/* use min tx rate */
+#define	UATH_TXQID_FF		0x20	/* content is fast frame */
+	__be32	connid;		/* tx connection id */
+#define UATH_ID_INVALID	0xffffffff	/* for sending prior to connection */
+	__be32	flags;		/* non-zero if response desired */
+#define UATH_TX_NOTIFY	(1 << 24)	/* f/w will send a UATH_NOTIF_TX */
+	__be32	buflen;		/* payload length */
+} __packed;
+
+
+#define AR5523_ID_BSS		2
+#define AR5523_ID_BROADCAST	0xffffffff
+
+/* structure for command UATH_CMD_WRITE_MAC */
+struct ar5523_write_mac {
+	__be32	reg;
+	__be32	len;
+	u8		data[32];
+} __packed;
+
+struct ar5523_cmd_rateset {
+	__u8		length;
+#define AR5523_MAX_NRATES	32
+	__u8		set[AR5523_MAX_NRATES];
+};
+
+struct ar5523_cmd_set_associd {		/* AR5523_WRITE_ASSOCID */
+	__be32	defaultrateix;
+	__be32	associd;
+	__be32	timoffset;
+	__be32	turboprime;
+	__u8	bssid[6];
+} __packed;
+
+/* structure for command WDCMSG_RESET */
+struct ar5523_cmd_reset {
+	__be32	flags;		/* channel flags */
+#define	UATH_CHAN_TURBO	0x0100
+#define	UATH_CHAN_CCK	0x0200
+#define	UATH_CHAN_OFDM	0x0400
+#define	UATH_CHAN_2GHZ	0x1000
+#define	UATH_CHAN_5GHZ	0x2000
+	__be32	freq;		/* channel frequency */
+	__be32	maxrdpower;
+	__be32	cfgctl;
+	__be32	twiceantennareduction;
+	__be32	channelchange;
+	__be32	keeprccontent;
+} __packed;
+
+/* structure for command WDCMSG_SET_BASIC_RATE */
+struct ar5523_cmd_rates {
+	__be32	connid;
+	__be32	keeprccontent;
+	__be32	size;
+	struct ar5523_cmd_rateset rateset;
+} __packed;
+
+enum {
+	WLAN_MODE_NONE = 0,
+	WLAN_MODE_11b,
+	WLAN_MODE_11a,
+	WLAN_MODE_11g,
+	WLAN_MODE_11a_TURBO,
+	WLAN_MODE_11g_TURBO,
+	WLAN_MODE_11a_TURBO_PRIME,
+	WLAN_MODE_11g_TURBO_PRIME,
+	WLAN_MODE_11a_XR,
+	WLAN_MODE_11g_XR,
+};
+
+struct ar5523_cmd_connection_attr {
+	__be32	longpreambleonly;
+	struct ar5523_cmd_rateset	rateset;
+	__be32	wlanmode;
+} __packed;
+
+/* structure for command AR5523_CREATE_CONNECTION */
+struct ar5523_cmd_create_connection {
+	__be32	connid;
+	__be32	bssid;
+	__be32	size;
+	struct ar5523_cmd_connection_attr	connattr;
+} __packed;
+
+struct ar5523_cmd_ledsteady {		/* WDCMSG_SET_LED_STEADY */
+	__be32	lednum;
+#define UATH_LED_LINK		0
+#define UATH_LED_ACTIVITY	1
+	__be32	ledmode;
+#define UATH_LED_OFF	0
+#define UATH_LED_ON	1
+} __packed;
+
+struct ar5523_cmd_ledblink {		/* WDCMSG_SET_LED_BLINK */
+	__be32	lednum;
+	__be32	ledmode;
+	__be32	blinkrate;
+	__be32	slowmode;
+} __packed;
+
+struct ar5523_cmd_ledstate {		/* WDCMSG_SET_LED_STATE */
+	__be32	connected;
+} __packed;
+
+struct ar5523_cmd_txq_attr {
+	__be32	priority;
+	__be32	aifs;
+	__be32	logcwmin;
+	__be32	logcwmax;
+	__be32	bursttime;
+	__be32	mode;
+	__be32	qflags;
+} __packed;
+
+struct ar5523_cmd_txq_setup {		/* WDCMSG_SETUP_TX_QUEUE */
+	__be32	qid;
+	__be32	len;
+	struct ar5523_cmd_txq_attr attr;
+} __packed;
+
+struct ar5523_cmd_rx_filter {		/* WDCMSG_RX_FILTER */
+	__be32	bits;
+#define UATH_FILTER_RX_UCAST		0x00000001
+#define UATH_FILTER_RX_MCAST		0x00000002
+#define UATH_FILTER_RX_BCAST		0x00000004
+#define UATH_FILTER_RX_CONTROL		0x00000008
+#define UATH_FILTER_RX_BEACON		0x00000010	/* beacon frames */
+#define UATH_FILTER_RX_PROM		0x00000020	/* promiscuous mode */
+#define UATH_FILTER_RX_PHY_ERR		0x00000040	/* phy errors */
+#define UATH_FILTER_RX_PHY_RADAR	0x00000080	/* radar phy errors */
+#define UATH_FILTER_RX_XR_POOL		0x00000400	/* XR group polls */
+#define UATH_FILTER_RX_PROBE_REQ	0x00000800
+	__be32	op;
+#define UATH_FILTER_OP_INIT		0x0
+#define UATH_FILTER_OP_SET		0x1
+#define UATH_FILTER_OP_CLEAR		0x2
+#define UATH_FILTER_OP_TEMP		0x3
+#define UATH_FILTER_OP_RESTORE		0x4
+} __packed;
+
+enum {
+	CFG_NONE,			/* Sentinal to indicate "no config" */
+	CFG_REG_DOMAIN,			/* Regulatory Domain */
+	CFG_RATE_CONTROL_ENABLE,
+	CFG_DEF_XMIT_DATA_RATE,		/* NB: if rate control is not enabled */
+	CFG_HW_TX_RETRIES,
+	CFG_SW_TX_RETRIES,
+	CFG_SLOW_CLOCK_ENABLE,
+	CFG_COMP_PROC,
+	CFG_USER_RTS_THRESHOLD,
+	CFG_XR2NORM_RATE_THRESHOLD,
+	CFG_XRMODE_SWITCH_COUNT,
+	CFG_PROTECTION_TYPE,
+	CFG_BURST_SEQ_THRESHOLD,
+	CFG_ABOLT,
+	CFG_IQ_LOG_COUNT_MAX,
+	CFG_MODE_CTS,
+	CFG_WME_ENABLED,
+	CFG_GPRS_CBR_PERIOD,
+	CFG_SERVICE_TYPE,
+	/* MAC Address to use.  Overrides EEPROM */
+	CFG_MAC_ADDR,
+	CFG_DEBUG_EAR,
+	CFG_INIT_REGS,
+	/* An ID for use in error & debug messages */
+	CFG_DEBUG_ID,
+	CFG_COMP_WIN_SZ,
+	CFG_DIVERSITY_CTL,
+	CFG_TP_SCALE,
+	CFG_TPC_HALF_DBM5,
+	CFG_TPC_HALF_DBM2,
+	CFG_OVERRD_TX_POWER,
+	CFG_USE_32KHZ_CLOCK,
+	CFG_GMODE_PROTECTION,
+	CFG_GMODE_PROTECT_RATE_INDEX,
+	CFG_GMODE_NON_ERP_PREAMBLE,
+	CFG_WDC_TRANSPORT_CHUNK_SIZE,
+};
+
+enum {
+	/* Sentinal to indicate "no capability" */
+	CAP_NONE,
+	CAP_ALL,			/* ALL capabilities */
+	CAP_TARGET_VERSION,
+	CAP_TARGET_REVISION,
+	CAP_MAC_VERSION,
+	CAP_MAC_REVISION,
+	CAP_PHY_REVISION,
+	CAP_ANALOG_5GHz_REVISION,
+	CAP_ANALOG_2GHz_REVISION,
+	/* Target supports WDC message debug features */
+	CAP_DEBUG_WDCMSG_SUPPORT,
+
+	CAP_REG_DOMAIN,
+	CAP_COUNTRY_CODE,
+	CAP_REG_CAP_BITS,
+
+	CAP_WIRELESS_MODES,
+	CAP_CHAN_SPREAD_SUPPORT,
+	CAP_SLEEP_AFTER_BEACON_BROKEN,
+	CAP_COMPRESS_SUPPORT,
+	CAP_BURST_SUPPORT,
+	CAP_FAST_FRAMES_SUPPORT,
+	CAP_CHAP_TUNING_SUPPORT,
+	CAP_TURBOG_SUPPORT,
+	CAP_TURBO_PRIME_SUPPORT,
+	CAP_DEVICE_TYPE,
+	CAP_XR_SUPPORT,
+	CAP_WME_SUPPORT,
+	CAP_TOTAL_QUEUES,
+	CAP_CONNECTION_ID_MAX,		/* Should absorb CAP_KEY_CACHE_SIZE */
+
+	CAP_LOW_5GHZ_CHAN,
+	CAP_HIGH_5GHZ_CHAN,
+	CAP_LOW_2GHZ_CHAN,
+	CAP_HIGH_2GHZ_CHAN,
+
+	CAP_MIC_AES_CCM,
+	CAP_MIC_CKIP,
+	CAP_MIC_TKIP,
+	CAP_MIC_TKIP_WME,
+	CAP_CIPHER_AES_CCM,
+	CAP_CIPHER_CKIP,
+	CAP_CIPHER_TKIP,
+
+	CAP_TWICE_ANTENNAGAIN_5G,
+	CAP_TWICE_ANTENNAGAIN_2G,
+};
+
+enum {
+	ST_NONE,                    /* Sentinal to indicate "no status" */
+	ST_ALL,
+	ST_SERVICE_TYPE,
+	ST_WLAN_MODE,
+	ST_FREQ,
+	ST_BAND,
+	ST_LAST_RSSI,
+	ST_PS_FRAMES_DROPPED,
+	ST_CACHED_DEF_ANT,
+	ST_COUNT_OTHER_RX_ANT,
+	ST_USE_FAST_DIVERSITY,
+	ST_MAC_ADDR,
+	ST_RX_GENERATION_NUM,
+	ST_TX_QUEUE_DEPTH,
+	ST_SERIAL_NUMBER,
+	ST_WDC_TRANSPORT_CHUNK_SIZE,
+};
+
+enum {
+	TARGET_DEVICE_AWAKE,
+	TARGET_DEVICE_SLEEP,
+	TARGET_DEVICE_PWRDN,
+	TARGET_DEVICE_PWRSAVE,
+	TARGET_DEVICE_SUSPEND,
+	TARGET_DEVICE_RESUME,
+};
+
+/* this is in net/ieee80211.h, but that conflicts with the mac80211 headers */
+#define IEEE80211_2ADDR_LEN	16
+
+#define AR5523_MIN_RXBUFSZ				\
+	(((sizeof(__be32) + IEEE80211_2ADDR_LEN +	\
+	   sizeof(struct ar5523_rx_desc)) + 3) & ~3)