Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 523 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath11k/qmi.h b/drivers/net/wireless/ath/ath11k/qmi.h
new file mode 100644
index 000000000..0909d53ce
--- /dev/null
+++ b/drivers/net/wireless/ath/ath11k/qmi.h
@@ -0,0 +1,523 @@
+/* SPDX-License-Identifier: BSD-3-Clause-Clear */
+/*
+ * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef ATH11K_QMI_H
+#define ATH11K_QMI_H
+
+#include <linux/mutex.h>
+#include <linux/soc/qcom/qmi.h>
+
+#define ATH11K_HOST_VERSION_STRING		"WIN"
+#define ATH11K_QMI_WLANFW_TIMEOUT_MS		10000
+#define ATH11K_QMI_MAX_BDF_FILE_NAME_SIZE	64
+#define ATH11K_QMI_CALDB_ADDRESS		0x4BA00000
+#define ATH11K_QMI_WLANFW_MAX_BUILD_ID_LEN_V01	128
+#define ATH11K_QMI_WLFW_SERVICE_ID_V01		0x45
+#define ATH11K_QMI_WLFW_SERVICE_VERS_V01	0x01
+#define ATH11K_QMI_WLFW_SERVICE_INS_ID_V01	0x02
+#define ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_QCA6390	0x01
+#define ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_IPQ8074	0x02
+#define ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_QCN9074	0x07
+#define ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_WCN6750	0x03
+#define ATH11K_QMI_WLANFW_MAX_TIMESTAMP_LEN_V01	32
+#define ATH11K_QMI_RESP_LEN_MAX			8192
+#define ATH11K_QMI_WLANFW_MAX_NUM_MEM_SEG_V01	52
+#define ATH11K_QMI_CALDB_SIZE			0x480000
+#define ATH11K_QMI_BDF_EXT_STR_LENGTH		0x20
+#define ATH11K_QMI_FW_MEM_REQ_SEGMENT_CNT	5
+
+#define QMI_WLFW_REQUEST_MEM_IND_V01		0x0035
+#define QMI_WLFW_FW_MEM_READY_IND_V01		0x0037
+#define QMI_WLFW_COLD_BOOT_CAL_DONE_IND_V01	0x003E
+#define QMI_WLFW_FW_READY_IND_V01		0x0021
+#define QMI_WLFW_FW_INIT_DONE_IND_V01		0x0038
+
+#define QMI_WLANFW_MAX_DATA_SIZE_V01		6144
+#define ATH11K_FIRMWARE_MODE_OFF		4
+#define ATH11K_COLD_BOOT_FW_RESET_DELAY		(40 * HZ)
+
+#define ATH11K_QMI_DEVICE_BAR_SIZE		0x200000
+
+struct ath11k_base;
+
+enum ath11k_qmi_file_type {
+	ATH11K_QMI_FILE_TYPE_BDF_GOLDEN,
+	ATH11K_QMI_FILE_TYPE_CALDATA = 2,
+	ATH11K_QMI_FILE_TYPE_EEPROM,
+	ATH11K_QMI_MAX_FILE_TYPE,
+};
+
+enum ath11k_qmi_bdf_type {
+	ATH11K_QMI_BDF_TYPE_BIN			= 0,
+	ATH11K_QMI_BDF_TYPE_ELF			= 1,
+	ATH11K_QMI_BDF_TYPE_REGDB		= 4,
+};
+
+enum ath11k_qmi_event_type {
+	ATH11K_QMI_EVENT_SERVER_ARRIVE,
+	ATH11K_QMI_EVENT_SERVER_EXIT,
+	ATH11K_QMI_EVENT_REQUEST_MEM,
+	ATH11K_QMI_EVENT_FW_MEM_READY,
+	ATH11K_QMI_EVENT_FW_READY,
+	ATH11K_QMI_EVENT_COLD_BOOT_CAL_START,
+	ATH11K_QMI_EVENT_COLD_BOOT_CAL_DONE,
+	ATH11K_QMI_EVENT_REGISTER_DRIVER,
+	ATH11K_QMI_EVENT_UNREGISTER_DRIVER,
+	ATH11K_QMI_EVENT_RECOVERY,
+	ATH11K_QMI_EVENT_FORCE_FW_ASSERT,
+	ATH11K_QMI_EVENT_POWER_UP,
+	ATH11K_QMI_EVENT_POWER_DOWN,
+	ATH11K_QMI_EVENT_FW_INIT_DONE,
+	ATH11K_QMI_EVENT_MAX,
+};
+
+struct ath11k_qmi_driver_event {
+	struct list_head list;
+	enum ath11k_qmi_event_type type;
+	void *data;
+};
+
+struct ath11k_qmi_ce_cfg {
+	const struct ce_pipe_config *tgt_ce;
+	int tgt_ce_len;
+	const struct service_to_pipe *svc_to_ce_map;
+	int svc_to_ce_map_len;
+	const u8 *shadow_reg;
+	int shadow_reg_len;
+	u32 *shadow_reg_v2;
+	int shadow_reg_v2_len;
+};
+
+struct ath11k_qmi_event_msg {
+	struct list_head list;
+	enum ath11k_qmi_event_type type;
+};
+
+struct target_mem_chunk {
+	u32 size;
+	u32 type;
+	u32 prev_size;
+	u32 prev_type;
+	dma_addr_t paddr;
+	u32 *vaddr;
+	void __iomem *iaddr;
+};
+
+struct target_info {
+	u32 chip_id;
+	u32 chip_family;
+	u32 board_id;
+	u32 soc_id;
+	u32 fw_version;
+	u32 eeprom_caldata;
+	char fw_build_timestamp[ATH11K_QMI_WLANFW_MAX_TIMESTAMP_LEN_V01 + 1];
+	char fw_build_id[ATH11K_QMI_WLANFW_MAX_BUILD_ID_LEN_V01 + 1];
+	char bdf_ext[ATH11K_QMI_BDF_EXT_STR_LENGTH];
+};
+
+struct m3_mem_region {
+	u32 size;
+	dma_addr_t paddr;
+	void *vaddr;
+};
+
+struct ath11k_qmi {
+	struct ath11k_base *ab;
+	struct qmi_handle handle;
+	struct sockaddr_qrtr sq;
+	struct work_struct event_work;
+	struct workqueue_struct *event_wq;
+	struct list_head event_list;
+	spinlock_t event_lock; /* spinlock for qmi event list */
+	struct ath11k_qmi_ce_cfg ce_cfg;
+	struct target_mem_chunk target_mem[ATH11K_QMI_WLANFW_MAX_NUM_MEM_SEG_V01];
+	u32 mem_seg_count;
+	u32 target_mem_mode;
+	bool target_mem_delayed;
+	u8 cal_done;
+	struct target_info target;
+	struct m3_mem_region m3_mem;
+	unsigned int service_ins_id;
+	wait_queue_head_t cold_boot_waitq;
+};
+
+#define QMI_WLANFW_HOST_CAP_REQ_MSG_V01_MAX_LEN		261
+#define QMI_WLANFW_HOST_CAP_REQ_V01			0x0034
+#define QMI_WLANFW_HOST_CAP_RESP_MSG_V01_MAX_LEN	7
+#define QMI_WLFW_HOST_CAP_RESP_V01			0x0034
+#define QMI_WLFW_MAX_NUM_GPIO_V01			32
+#define QMI_IPQ8074_FW_MEM_MODE				0xFF
+#define HOST_DDR_REGION_TYPE				0x1
+#define BDF_MEM_REGION_TYPE				0x2
+#define M3_DUMP_REGION_TYPE				0x3
+#define CALDB_MEM_REGION_TYPE				0x4
+
+struct qmi_wlanfw_host_cap_req_msg_v01 {
+	u8 num_clients_valid;
+	u32 num_clients;
+	u8 wake_msi_valid;
+	u32 wake_msi;
+	u8 gpios_valid;
+	u32 gpios_len;
+	u32 gpios[QMI_WLFW_MAX_NUM_GPIO_V01];
+	u8 nm_modem_valid;
+	u8 nm_modem;
+	u8 bdf_support_valid;
+	u8 bdf_support;
+	u8 bdf_cache_support_valid;
+	u8 bdf_cache_support;
+	u8 m3_support_valid;
+	u8 m3_support;
+	u8 m3_cache_support_valid;
+	u8 m3_cache_support;
+	u8 cal_filesys_support_valid;
+	u8 cal_filesys_support;
+	u8 cal_cache_support_valid;
+	u8 cal_cache_support;
+	u8 cal_done_valid;
+	u8 cal_done;
+	u8 mem_bucket_valid;
+	u32 mem_bucket;
+	u8 mem_cfg_mode_valid;
+	u8 mem_cfg_mode;
+};
+
+struct qmi_wlanfw_host_cap_resp_msg_v01 {
+	struct qmi_response_type_v01 resp;
+};
+
+#define QMI_WLANFW_IND_REGISTER_REQ_MSG_V01_MAX_LEN		54
+#define QMI_WLANFW_IND_REGISTER_REQ_V01				0x0020
+#define QMI_WLANFW_IND_REGISTER_RESP_MSG_V01_MAX_LEN		18
+#define QMI_WLANFW_IND_REGISTER_RESP_V01			0x0020
+#define QMI_WLANFW_CLIENT_ID					0x4b4e454c
+
+struct qmi_wlanfw_ind_register_req_msg_v01 {
+	u8 fw_ready_enable_valid;
+	u8 fw_ready_enable;
+	u8 initiate_cal_download_enable_valid;
+	u8 initiate_cal_download_enable;
+	u8 initiate_cal_update_enable_valid;
+	u8 initiate_cal_update_enable;
+	u8 msa_ready_enable_valid;
+	u8 msa_ready_enable;
+	u8 pin_connect_result_enable_valid;
+	u8 pin_connect_result_enable;
+	u8 client_id_valid;
+	u32 client_id;
+	u8 request_mem_enable_valid;
+	u8 request_mem_enable;
+	u8 fw_mem_ready_enable_valid;
+	u8 fw_mem_ready_enable;
+	u8 fw_init_done_enable_valid;
+	u8 fw_init_done_enable;
+	u8 rejuvenate_enable_valid;
+	u32 rejuvenate_enable;
+	u8 xo_cal_enable_valid;
+	u8 xo_cal_enable;
+	u8 cal_done_enable_valid;
+	u8 cal_done_enable;
+};
+
+struct qmi_wlanfw_ind_register_resp_msg_v01 {
+	struct qmi_response_type_v01 resp;
+	u8 fw_status_valid;
+	u64 fw_status;
+};
+
+#define QMI_WLANFW_REQUEST_MEM_IND_MSG_V01_MAX_LEN	1824
+#define QMI_WLANFW_RESPOND_MEM_REQ_MSG_V01_MAX_LEN	888
+#define QMI_WLANFW_RESPOND_MEM_RESP_MSG_V01_MAX_LEN	7
+#define QMI_WLANFW_REQUEST_MEM_IND_V01			0x0035
+#define QMI_WLANFW_RESPOND_MEM_REQ_V01			0x0036
+#define QMI_WLANFW_RESPOND_MEM_RESP_V01			0x0036
+#define QMI_WLANFW_MAX_NUM_MEM_CFG_V01			2
+
+struct qmi_wlanfw_mem_cfg_s_v01 {
+	u64 offset;
+	u32 size;
+	u8 secure_flag;
+};
+
+enum qmi_wlanfw_mem_type_enum_v01 {
+	WLANFW_MEM_TYPE_ENUM_MIN_VAL_V01 = INT_MIN,
+	QMI_WLANFW_MEM_TYPE_MSA_V01 = 0,
+	QMI_WLANFW_MEM_TYPE_DDR_V01 = 1,
+	QMI_WLANFW_MEM_BDF_V01 = 2,
+	QMI_WLANFW_MEM_M3_V01 = 3,
+	QMI_WLANFW_MEM_CAL_V01 = 4,
+	QMI_WLANFW_MEM_DPD_V01 = 5,
+	WLANFW_MEM_TYPE_ENUM_MAX_VAL_V01 = INT_MAX,
+};
+
+struct qmi_wlanfw_mem_seg_s_v01 {
+	u32 size;
+	enum qmi_wlanfw_mem_type_enum_v01 type;
+	u32 mem_cfg_len;
+	struct qmi_wlanfw_mem_cfg_s_v01 mem_cfg[QMI_WLANFW_MAX_NUM_MEM_CFG_V01];
+};
+
+struct qmi_wlanfw_request_mem_ind_msg_v01 {
+	u32 mem_seg_len;
+	struct qmi_wlanfw_mem_seg_s_v01 mem_seg[ATH11K_QMI_WLANFW_MAX_NUM_MEM_SEG_V01];
+};
+
+struct qmi_wlanfw_mem_seg_resp_s_v01 {
+	u64 addr;
+	u32 size;
+	enum qmi_wlanfw_mem_type_enum_v01 type;
+	u8 restore;
+};
+
+struct qmi_wlanfw_respond_mem_req_msg_v01 {
+	u32 mem_seg_len;
+	struct qmi_wlanfw_mem_seg_resp_s_v01 mem_seg[ATH11K_QMI_WLANFW_MAX_NUM_MEM_SEG_V01];
+};
+
+struct qmi_wlanfw_respond_mem_resp_msg_v01 {
+	struct qmi_response_type_v01 resp;
+};
+
+struct qmi_wlanfw_fw_mem_ready_ind_msg_v01 {
+	char placeholder;
+};
+
+struct qmi_wlanfw_fw_ready_ind_msg_v01 {
+	char placeholder;
+};
+
+struct qmi_wlanfw_fw_cold_cal_done_ind_msg_v01 {
+	char placeholder;
+};
+
+struct qmi_wlfw_fw_init_done_ind_msg_v01 {
+	char placeholder;
+};
+
+#define QMI_WLANFW_CAP_REQ_MSG_V01_MAX_LEN		0
+#define QMI_WLANFW_CAP_RESP_MSG_V01_MAX_LEN		235
+#define QMI_WLANFW_CAP_REQ_V01				0x0024
+#define QMI_WLANFW_CAP_RESP_V01				0x0024
+#define QMI_WLANFW_DEVICE_INFO_REQ_V01			0x004C
+#define QMI_WLANFW_DEVICE_INFO_REQ_MSG_V01_MAX_LEN	0
+
+enum qmi_wlanfw_pipedir_enum_v01 {
+	QMI_WLFW_PIPEDIR_NONE_V01 = 0,
+	QMI_WLFW_PIPEDIR_IN_V01 = 1,
+	QMI_WLFW_PIPEDIR_OUT_V01 = 2,
+	QMI_WLFW_PIPEDIR_INOUT_V01 = 3,
+};
+
+struct qmi_wlanfw_ce_tgt_pipe_cfg_s_v01 {
+	__le32 pipe_num;
+	__le32 pipe_dir;
+	__le32 nentries;
+	__le32 nbytes_max;
+	__le32 flags;
+};
+
+struct qmi_wlanfw_ce_svc_pipe_cfg_s_v01 {
+	__le32 service_id;
+	__le32 pipe_dir;
+	__le32 pipe_num;
+};
+
+struct qmi_wlanfw_shadow_reg_cfg_s_v01 {
+	u16 id;
+	u16 offset;
+};
+
+struct qmi_wlanfw_shadow_reg_v2_cfg_s_v01 {
+	u32 addr;
+};
+
+struct qmi_wlanfw_memory_region_info_s_v01 {
+	u64 region_addr;
+	u32 size;
+	u8 secure_flag;
+};
+
+struct qmi_wlanfw_rf_chip_info_s_v01 {
+	u32 chip_id;
+	u32 chip_family;
+};
+
+struct qmi_wlanfw_rf_board_info_s_v01 {
+	u32 board_id;
+};
+
+struct qmi_wlanfw_soc_info_s_v01 {
+	u32 soc_id;
+};
+
+struct qmi_wlanfw_fw_version_info_s_v01 {
+	u32 fw_version;
+	char fw_build_timestamp[ATH11K_QMI_WLANFW_MAX_TIMESTAMP_LEN_V01 + 1];
+};
+
+enum qmi_wlanfw_cal_temp_id_enum_v01 {
+	QMI_WLANFW_CAL_TEMP_IDX_0_V01 = 0,
+	QMI_WLANFW_CAL_TEMP_IDX_1_V01 = 1,
+	QMI_WLANFW_CAL_TEMP_IDX_2_V01 = 2,
+	QMI_WLANFW_CAL_TEMP_IDX_3_V01 = 3,
+	QMI_WLANFW_CAL_TEMP_IDX_4_V01 = 4,
+	QMI_WLANFW_CAL_TEMP_ID_MAX_V01 = 0xFF,
+};
+
+struct qmi_wlanfw_cap_resp_msg_v01 {
+	struct qmi_response_type_v01 resp;
+	u8 chip_info_valid;
+	struct qmi_wlanfw_rf_chip_info_s_v01 chip_info;
+	u8 board_info_valid;
+	struct qmi_wlanfw_rf_board_info_s_v01 board_info;
+	u8 soc_info_valid;
+	struct qmi_wlanfw_soc_info_s_v01 soc_info;
+	u8 fw_version_info_valid;
+	struct qmi_wlanfw_fw_version_info_s_v01 fw_version_info;
+	u8 fw_build_id_valid;
+	char fw_build_id[ATH11K_QMI_WLANFW_MAX_BUILD_ID_LEN_V01 + 1];
+	u8 num_macs_valid;
+	u8 num_macs;
+	u8 voltage_mv_valid;
+	u32 voltage_mv;
+	u8 time_freq_hz_valid;
+	u32 time_freq_hz;
+	u8 otp_version_valid;
+	u32 otp_version;
+	u8 eeprom_read_timeout_valid;
+	u32 eeprom_read_timeout;
+};
+
+struct qmi_wlanfw_cap_req_msg_v01 {
+	char placeholder;
+};
+
+struct qmi_wlanfw_device_info_req_msg_v01 {
+	char placeholder;
+};
+
+struct qmi_wlanfw_device_info_resp_msg_v01 {
+	struct qmi_response_type_v01 resp;
+	u64 bar_addr;
+	u32 bar_size;
+	u8 bar_addr_valid;
+	u8 bar_size_valid;
+};
+
+#define QMI_WLANFW_BDF_DOWNLOAD_REQ_MSG_V01_MAX_LEN	6182
+#define QMI_WLANFW_BDF_DOWNLOAD_RESP_MSG_V01_MAX_LEN	7
+#define QMI_WLANFW_BDF_DOWNLOAD_RESP_V01		0x0025
+#define QMI_WLANFW_BDF_DOWNLOAD_REQ_V01			0x0025
+/* TODO: Need to check with MCL and FW team that data can be pointer and
+ * can be last element in structure
+ */
+struct qmi_wlanfw_bdf_download_req_msg_v01 {
+	u8 valid;
+	u8 file_id_valid;
+	enum qmi_wlanfw_cal_temp_id_enum_v01 file_id;
+	u8 total_size_valid;
+	u32 total_size;
+	u8 seg_id_valid;
+	u32 seg_id;
+	u8 data_valid;
+	u32 data_len;
+	u8 data[QMI_WLANFW_MAX_DATA_SIZE_V01];
+	u8 end_valid;
+	u8 end;
+	u8 bdf_type_valid;
+	u8 bdf_type;
+
+};
+
+struct qmi_wlanfw_bdf_download_resp_msg_v01 {
+	struct qmi_response_type_v01 resp;
+};
+
+#define QMI_WLANFW_M3_INFO_REQ_MSG_V01_MAX_MSG_LEN	18
+#define QMI_WLANFW_M3_INFO_RESP_MSG_V01_MAX_MSG_LEN	7
+#define QMI_WLANFW_M3_INFO_RESP_V01		0x003C
+#define QMI_WLANFW_M3_INFO_REQ_V01		0x003C
+
+struct qmi_wlanfw_m3_info_req_msg_v01 {
+	u64 addr;
+	u32 size;
+};
+
+struct qmi_wlanfw_m3_info_resp_msg_v01 {
+	struct qmi_response_type_v01 resp;
+};
+
+#define QMI_WLANFW_WLAN_MODE_REQ_MSG_V01_MAX_LEN	11
+#define QMI_WLANFW_WLAN_MODE_RESP_MSG_V01_MAX_LEN	7
+#define QMI_WLANFW_WLAN_CFG_REQ_MSG_V01_MAX_LEN		803
+#define QMI_WLANFW_WLAN_CFG_RESP_MSG_V01_MAX_LEN	7
+#define QMI_WLANFW_WLAN_INI_REQ_MSG_V01_MAX_LEN		4
+#define QMI_WLANFW_WLAN_MODE_REQ_V01			0x0022
+#define QMI_WLANFW_WLAN_MODE_RESP_V01			0x0022
+#define QMI_WLANFW_WLAN_CFG_REQ_V01			0x0023
+#define QMI_WLANFW_WLAN_CFG_RESP_V01			0x0023
+#define QMI_WLANFW_WLAN_INI_REQ_V01			0x002F
+#define QMI_WLANFW_MAX_STR_LEN_V01			16
+#define QMI_WLANFW_MAX_NUM_CE_V01			12
+#define QMI_WLANFW_MAX_NUM_SVC_V01			24
+#define QMI_WLANFW_MAX_NUM_SHADOW_REG_V01		24
+#define QMI_WLANFW_MAX_NUM_SHADOW_REG_V2_V01		36
+
+struct qmi_wlanfw_wlan_mode_req_msg_v01 {
+	u32 mode;
+	u8 hw_debug_valid;
+	u8 hw_debug;
+};
+
+struct qmi_wlanfw_wlan_mode_resp_msg_v01 {
+	struct qmi_response_type_v01 resp;
+};
+
+struct qmi_wlanfw_wlan_cfg_req_msg_v01 {
+	u8 host_version_valid;
+	char host_version[QMI_WLANFW_MAX_STR_LEN_V01 + 1];
+	u8  tgt_cfg_valid;
+	u32  tgt_cfg_len;
+	struct qmi_wlanfw_ce_tgt_pipe_cfg_s_v01
+			tgt_cfg[QMI_WLANFW_MAX_NUM_CE_V01];
+	u8  svc_cfg_valid;
+	u32 svc_cfg_len;
+	struct qmi_wlanfw_ce_svc_pipe_cfg_s_v01
+			svc_cfg[QMI_WLANFW_MAX_NUM_SVC_V01];
+	u8 shadow_reg_valid;
+	u32 shadow_reg_len;
+	struct qmi_wlanfw_shadow_reg_cfg_s_v01
+		shadow_reg[QMI_WLANFW_MAX_NUM_SHADOW_REG_V01];
+	u8 shadow_reg_v2_valid;
+	u32 shadow_reg_v2_len;
+	struct qmi_wlanfw_shadow_reg_v2_cfg_s_v01
+		shadow_reg_v2[QMI_WLANFW_MAX_NUM_SHADOW_REG_V2_V01];
+};
+
+struct qmi_wlanfw_wlan_cfg_resp_msg_v01 {
+	struct qmi_response_type_v01 resp;
+};
+
+struct qmi_wlanfw_wlan_ini_req_msg_v01 {
+	/* Must be set to true if enablefwlog is being passed */
+	u8 enablefwlog_valid;
+	u8 enablefwlog;
+};
+
+struct qmi_wlanfw_wlan_ini_resp_msg_v01 {
+	struct qmi_response_type_v01 resp;
+};
+
+int ath11k_qmi_firmware_start(struct ath11k_base *ab,
+			      u32 mode);
+void ath11k_qmi_firmware_stop(struct ath11k_base *ab);
+void ath11k_qmi_event_work(struct work_struct *work);
+void ath11k_qmi_msg_recv_work(struct work_struct *work);
+void ath11k_qmi_deinit_service(struct ath11k_base *ab);
+int ath11k_qmi_init_service(struct ath11k_base *ab);
+void ath11k_qmi_free_resource(struct ath11k_base *ab);
+
+#endif