Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 341 insertions, 0 deletions

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/pub.h b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/pub.h
new file mode 100644
index 000000000..4da38cb4f
--- /dev/null
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/pub.h
@@ -0,0 +1,341 @@
+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _BRCM_PUB_H_
+#define _BRCM_PUB_H_
+
+#include <linux/bcma/bcma.h>
+#include <brcmu_wifi.h>
+#include "types.h"
+#include "defs.h"
+
+#define	BRCMS_NUMRATES	16	/* max # of rates in a rateset */
+
+/* phy types */
+#define	PHY_TYPE_A	0	/* Phy type A */
+#define	PHY_TYPE_G	2	/* Phy type G */
+#define	PHY_TYPE_N	4	/* Phy type N */
+#define	PHY_TYPE_LP	5	/* Phy type Low Power A/B/G */
+#define	PHY_TYPE_SSN	6	/* Phy type Single Stream N */
+#define	PHY_TYPE_LCN	8	/* Phy type Single Stream N */
+#define	PHY_TYPE_LCNXN	9	/* Phy type 2-stream N */
+#define	PHY_TYPE_HT	7	/* Phy type 3-Stream N */
+
+/* bw */
+#define BRCMS_10_MHZ	10	/* 10Mhz nphy channel bandwidth */
+#define BRCMS_20_MHZ	20	/* 20Mhz nphy channel bandwidth */
+#define BRCMS_40_MHZ	40	/* 40Mhz nphy channel bandwidth */
+
+#define	BRCMS_RSSI_MINVAL	-200	/* Low value, e.g. for forcing roam */
+#define	BRCMS_RSSI_NO_SIGNAL	-91	/* NDIS RSSI link quality cutoffs */
+#define	BRCMS_RSSI_VERY_LOW	-80	/* Very low quality cutoffs */
+#define	BRCMS_RSSI_LOW		-70	/* Low quality cutoffs */
+#define	BRCMS_RSSI_GOOD		-68	/* Good quality cutoffs */
+#define	BRCMS_RSSI_VERY_GOOD	-58	/* Very good quality cutoffs */
+#define	BRCMS_RSSI_EXCELLENT	-57	/* Excellent quality cutoffs */
+
+/* a large TX Power as an init value to factor out of min() calculations,
+ * keep low enough to fit in an s8, units are .25 dBm
+ */
+#define BRCMS_TXPWR_MAX		(127)	/* ~32 dBm = 1,500 mW */
+
+/* rate related definitions */
+#define	BRCMS_RATE_FLAG	0x80	/* Flag to indicate it is a basic rate */
+#define	BRCMS_RATE_MASK	0x7f	/* Rate value mask w/o basic rate flag */
+
+/* legacy rx Antenna diversity for SISO rates */
+#define	ANT_RX_DIV_FORCE_0	0	/* Use antenna 0 */
+#define	ANT_RX_DIV_FORCE_1	1	/* Use antenna 1 */
+#define	ANT_RX_DIV_START_1	2	/* Choose starting with 1 */
+#define	ANT_RX_DIV_START_0	3	/* Choose starting with 0 */
+#define	ANT_RX_DIV_ENABLE	3	/* APHY bbConfig Enable RX Diversity */
+/* default antdiv setting */
+#define ANT_RX_DIV_DEF		ANT_RX_DIV_START_0
+
+/* legacy rx Antenna diversity for SISO rates */
+/* Tx on antenna 0, "legacy term Main" */
+#define ANT_TX_FORCE_0		0
+/* Tx on antenna 1, "legacy term Aux" */
+#define ANT_TX_FORCE_1		1
+/* Tx on phy's last good Rx antenna */
+#define ANT_TX_LAST_RX		3
+/* driver's default tx antenna setting */
+#define ANT_TX_DEF		3
+
+/* Tx Chain values */
+/* def bitmap of txchain */
+#define TXCHAIN_DEF		0x1
+/* default bitmap of tx chains for nphy */
+#define TXCHAIN_DEF_NPHY	0x3
+/* default bitmap of tx chains for nphy */
+#define TXCHAIN_DEF_HTPHY	0x7
+/* def bitmap of rxchain */
+#define RXCHAIN_DEF		0x1
+/* default bitmap of rx chains for nphy */
+#define RXCHAIN_DEF_NPHY	0x3
+/* default bitmap of rx chains for nphy */
+#define RXCHAIN_DEF_HTPHY	0x7
+/* no antenna switch */
+#define ANTSWITCH_NONE		0
+/* antenna switch on 4321CB2, 2of3 */
+#define ANTSWITCH_TYPE_1	1
+/* antenna switch on 4321MPCI, 2of3 */
+#define ANTSWITCH_TYPE_2	2
+/* antenna switch on 4322, 2of3 */
+#define ANTSWITCH_TYPE_3	3
+
+#define RXBUFSZ		PKTBUFSZ
+
+#define MAX_STREAMS_SUPPORTED	4	/* max number of streams supported */
+
+struct brcm_rateset {
+	/* # rates in this set */
+	u32 count;
+	/* rates in 500kbps units w/hi bit set if basic */
+	u8 rates[WL_NUMRATES];
+};
+
+struct brcms_c_rateset {
+	uint count;		/* number of rates in rates[] */
+	 /* rates in 500kbps units w/hi bit set if basic */
+	u8 rates[BRCMS_NUMRATES];
+	u8 htphy_membership;	/* HT PHY Membership */
+	u8 mcs[MCSSET_LEN];	/* supported mcs index bit map */
+};
+
+/* All the HT-specific default advertised capabilities (including AMPDU)
+ * should be grouped here at one place
+ */
+#define AMPDU_DEF_MPDU_DENSITY	6	/* default mpdu density (110 ==> 4us) */
+
+/* wlc internal bss_info */
+struct brcms_bss_info {
+	u8 BSSID[ETH_ALEN];	/* network BSSID */
+	u16 flags;		/* flags for internal attributes */
+	u8 SSID_len;		/* the length of SSID */
+	u8 SSID[32];		/* SSID string */
+	s16 RSSI;		/* receive signal strength (in dBm) */
+	s16 SNR;		/* receive signal SNR in dB */
+	u16 beacon_period;	/* units are Kusec */
+	u16 chanspec;	/* Channel num, bw, ctrl_sb and band */
+	struct brcms_c_rateset rateset;	/* supported rates */
+};
+
+#define MAC80211_PROMISC_BCNS	(1 << 0)
+#define MAC80211_SCAN		(1 << 1)
+
+/*
+ * Public portion of common driver state structure.
+ * The wlc handle points at this.
+ */
+struct brcms_pub {
+	struct brcms_c_info *wlc;
+	struct ieee80211_hw *ieee_hw;
+	struct scb_ampdu *global_ampdu;
+	uint mac80211_state;
+	uint unit;		/* device instance number */
+	uint corerev;		/* core revision */
+	struct si_pub *sih;	/* SI handle (cookie for siutils calls) */
+	bool up;		/* interface up and running */
+	bool hw_off;		/* HW is off */
+	bool hw_up;		/* one time hw up/down */
+	bool _piomode;		/* true if pio mode */
+	uint _nbands;		/* # bands supported */
+	uint now;		/* # elapsed seconds */
+
+	bool delayed_down;	/* down delayed */
+	bool associated;	/* true:part of [I]BSS, false: not */
+	/* (union of stas_associated, aps_associated) */
+	bool _ampdu;		/* ampdu enabled or not */
+	u8 _n_enab;		/* bitmap of 11N + HT support */
+
+	u8 cur_etheraddr[ETH_ALEN];	/* our local ethernet address */
+
+	u32 radio_disabled;	/* bit vector for radio disabled reasons */
+
+	u16 boardrev;	/* version # of particular board */
+	u8 sromrev;		/* version # of the srom */
+	char srom_ccode[BRCM_CNTRY_BUF_SZ];	/* Country Code in SROM */
+	u32 boardflags;	/* Board specific flags from srom */
+	u32 boardflags2;	/* More board flags if sromrev >= 4 */
+	bool phy_11ncapable;	/* the PHY/HW is capable of 802.11N */
+
+	struct wl_cnt *_cnt;	/* low-level counters in driver */
+	struct dentry *dbgfs_dir;
+};
+
+enum wlc_par_id {
+	IOV_MPC = 1,
+	IOV_RTSTHRESH,
+	IOV_QTXPOWER,
+	IOV_BCN_LI_BCN		/* Beacon listen interval in # of beacons */
+};
+
+/***********************************************
+ * Feature-related macros to optimize out code *
+ * *********************************************
+ */
+
+#define ENAB_1x1	0x01
+#define ENAB_2x2	0x02
+#define ENAB_3x3	0x04
+#define ENAB_4x4	0x08
+#define SUPPORT_11N	(ENAB_1x1|ENAB_2x2)
+#define SUPPORT_HT	(ENAB_1x1|ENAB_2x2|ENAB_3x3)
+
+/* WL11N Support */
+#define AMPDU_AGG_HOST	1
+
+/* network protection config */
+#define	BRCMS_PROT_G_SPEC		1	/* SPEC g protection */
+#define	BRCMS_PROT_G_OVR		2	/* SPEC g prot override */
+#define	BRCMS_PROT_G_USER		3	/* gmode specified by user */
+#define	BRCMS_PROT_OVERLAP	4	/* overlap */
+#define	BRCMS_PROT_N_USER		10	/* nmode specified by user */
+#define	BRCMS_PROT_N_CFG		11	/* n protection */
+#define	BRCMS_PROT_N_CFG_OVR	12	/* n protection override */
+#define	BRCMS_PROT_N_NONGF	13	/* non-GF protection */
+#define	BRCMS_PROT_N_NONGF_OVR	14	/* non-GF protection override */
+#define	BRCMS_PROT_N_PAM_OVR	15	/* n preamble override */
+#define	BRCMS_PROT_N_OBSS		16	/* non-HT OBSS present */
+
+/*
+ * 54g modes (basic bits may still be overridden)
+ *
+ * GMODE_LEGACY_B
+ *	Rateset: 1b, 2b, 5.5, 11
+ *	Preamble: Long
+ *	Shortslot: Off
+ * GMODE_AUTO
+ *	Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54
+ *	Extended Rateset: 6, 9, 12, 48
+ *	Preamble: Long
+ *	Shortslot: Auto
+ * GMODE_ONLY
+ *	Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54
+ *	Extended Rateset: 6b, 9, 12b, 48
+ *	Preamble: Short required
+ *	Shortslot: Auto
+ * GMODE_B_DEFERRED
+ *	Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54
+ *	Extended Rateset: 6, 9, 12, 48
+ *	Preamble: Long
+ *	Shortslot: On
+ * GMODE_PERFORMANCE
+ *	Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54
+ *	Preamble: Short required
+ *	Shortslot: On and required
+ * GMODE_LRS
+ *	Rateset: 1b, 2b, 5.5b, 11b
+ *	Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54
+ *	Preamble: Long
+ *	Shortslot: Auto
+ */
+#define GMODE_LEGACY_B		0
+#define GMODE_AUTO		1
+#define GMODE_ONLY		2
+#define GMODE_B_DEFERRED	3
+#define GMODE_PERFORMANCE	4
+#define GMODE_LRS		5
+#define GMODE_MAX		6
+
+/* MCS values greater than this enable multiple streams */
+#define HIGHEST_SINGLE_STREAM_MCS	7
+
+#define	MAXBANDS		2	/* Maximum #of bands */
+
+/* max number of antenna configurations */
+#define ANT_SELCFG_MAX		4
+
+struct brcms_antselcfg {
+	u8 ant_config[ANT_SELCFG_MAX];	/* antenna configuration */
+	u8 num_antcfg;	/* number of available antenna configurations */
+};
+
+/* common functions for every port */
+struct brcms_c_info *brcms_c_attach(struct brcms_info *wl,
+				    struct bcma_device *core, uint unit,
+				    bool piomode, uint *perr);
+uint brcms_c_detach(struct brcms_c_info *wlc);
+int brcms_c_up(struct brcms_c_info *wlc);
+uint brcms_c_down(struct brcms_c_info *wlc);
+
+bool brcms_c_chipmatch(struct bcma_device *core);
+void brcms_c_init(struct brcms_c_info *wlc, bool mute_tx);
+void brcms_c_reset(struct brcms_c_info *wlc);
+
+void brcms_c_intrson(struct brcms_c_info *wlc);
+u32 brcms_c_intrsoff(struct brcms_c_info *wlc);
+void brcms_c_intrsrestore(struct brcms_c_info *wlc, u32 macintmask);
+bool brcms_c_intrsupd(struct brcms_c_info *wlc);
+bool brcms_c_isr(struct brcms_c_info *wlc);
+bool brcms_c_dpc(struct brcms_c_info *wlc, bool bounded);
+bool brcms_c_sendpkt_mac80211(struct brcms_c_info *wlc, struct sk_buff *sdu,
+			      struct ieee80211_hw *hw);
+bool brcms_c_aggregatable(struct brcms_c_info *wlc, u8 tid);
+void brcms_c_protection_upd(struct brcms_c_info *wlc, uint idx, int val);
+int brcms_c_get_header_len(void);
+void brcms_c_set_addrmatch(struct brcms_c_info *wlc, int match_reg_offset,
+			   const u8 *addr);
+void brcms_c_wme_setparams(struct brcms_c_info *wlc, u16 aci,
+			   const struct ieee80211_tx_queue_params *arg,
+			   bool suspend);
+struct brcms_pub *brcms_c_pub(struct brcms_c_info *wlc);
+void brcms_c_ampdu_flush(struct brcms_c_info *wlc, struct ieee80211_sta *sta,
+			 u16 tid);
+void brcms_c_ampdu_tx_operational(struct brcms_c_info *wlc, u8 tid,
+				  u8 ba_wsize, uint max_rx_ampdu_bytes);
+int brcms_c_module_register(struct brcms_pub *pub, const char *name,
+			    struct brcms_info *hdl,
+			    int (*down_fn)(void *handle));
+int brcms_c_module_unregister(struct brcms_pub *pub, const char *name,
+			      struct brcms_info *hdl);
+void brcms_c_suspend_mac_and_wait(struct brcms_c_info *wlc);
+void brcms_c_enable_mac(struct brcms_c_info *wlc);
+void brcms_c_associate_upd(struct brcms_c_info *wlc, bool state);
+void brcms_c_scan_start(struct brcms_c_info *wlc);
+void brcms_c_scan_stop(struct brcms_c_info *wlc);
+int brcms_c_get_curband(struct brcms_c_info *wlc);
+int brcms_c_set_channel(struct brcms_c_info *wlc, u16 channel);
+int brcms_c_set_rate_limit(struct brcms_c_info *wlc, u16 srl, u16 lrl);
+void brcms_c_get_current_rateset(struct brcms_c_info *wlc,
+				 struct brcm_rateset *currs);
+int brcms_c_set_rateset(struct brcms_c_info *wlc, struct brcm_rateset *rs);
+int brcms_c_set_beacon_period(struct brcms_c_info *wlc, u16 period);
+u16 brcms_c_get_phy_type(struct brcms_c_info *wlc, int phyidx);
+void brcms_c_set_shortslot_override(struct brcms_c_info *wlc,
+				    s8 sslot_override);
+void brcms_c_set_beacon_listen_interval(struct brcms_c_info *wlc, u8 interval);
+u64 brcms_c_tsf_get(struct brcms_c_info *wlc);
+void brcms_c_tsf_set(struct brcms_c_info *wlc, u64 tsf);
+int brcms_c_set_tx_power(struct brcms_c_info *wlc, int txpwr);
+int brcms_c_get_tx_power(struct brcms_c_info *wlc);
+bool brcms_c_check_radio_disabled(struct brcms_c_info *wlc);
+void brcms_c_mute(struct brcms_c_info *wlc, bool on);
+bool brcms_c_tx_flush_completed(struct brcms_c_info *wlc);
+void brcms_c_start_station(struct brcms_c_info *wlc, u8 *addr);
+void brcms_c_start_ap(struct brcms_c_info *wlc, u8 *addr, const u8 *bssid,
+		      u8 *ssid, size_t ssid_len);
+void brcms_c_start_adhoc(struct brcms_c_info *wlc, u8 *addr);
+void brcms_c_update_beacon(struct brcms_c_info *wlc);
+void brcms_c_set_new_beacon(struct brcms_c_info *wlc, struct sk_buff *beacon,
+			    u16 tim_offset, u16 dtim_period);
+void brcms_c_set_new_probe_resp(struct brcms_c_info *wlc,
+				struct sk_buff *probe_resp);
+void brcms_c_enable_probe_resp(struct brcms_c_info *wlc, bool enable);
+void brcms_c_set_ssid(struct brcms_c_info *wlc, u8 *ssid, size_t ssid_len);
+
+#endif				/* _BRCM_PUB_H_ */