Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 352 insertions, 0 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/cfg/6000.c b/drivers/net/wireless/intel/iwlwifi/cfg/6000.c
new file mode 100644
index 000000000..20929e59c
--- /dev/null
+++ b/drivers/net/wireless/intel/iwlwifi/cfg/6000.c
@@ -0,0 +1,352 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/******************************************************************************
+ *
+ * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved.
+ * Copyright(c) 2018 - 2020 Intel Corporation
+ *****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/stringify.h>
+#include "iwl-config.h"
+#include "iwl-agn-hw.h"
+#include "dvm/commands.h" /* needed for BT for now */
+
+/* Highest firmware API version supported */
+#define IWL6000_UCODE_API_MAX 6
+#define IWL6050_UCODE_API_MAX 5
+#define IWL6000G2_UCODE_API_MAX 6
+#define IWL6035_UCODE_API_MAX 6
+
+/* Lowest firmware API version supported */
+#define IWL6000_UCODE_API_MIN 4
+#define IWL6050_UCODE_API_MIN 4
+#define IWL6000G2_UCODE_API_MIN 5
+#define IWL6035_UCODE_API_MIN 6
+
+/* EEPROM versions */
+#define EEPROM_6000_TX_POWER_VERSION	(4)
+#define EEPROM_6000_EEPROM_VERSION	(0x423)
+#define EEPROM_6050_TX_POWER_VERSION	(4)
+#define EEPROM_6050_EEPROM_VERSION	(0x532)
+#define EEPROM_6150_TX_POWER_VERSION	(6)
+#define EEPROM_6150_EEPROM_VERSION	(0x553)
+#define EEPROM_6005_TX_POWER_VERSION	(6)
+#define EEPROM_6005_EEPROM_VERSION	(0x709)
+#define EEPROM_6030_TX_POWER_VERSION	(6)
+#define EEPROM_6030_EEPROM_VERSION	(0x709)
+#define EEPROM_6035_TX_POWER_VERSION	(6)
+#define EEPROM_6035_EEPROM_VERSION	(0x753)
+
+#define IWL6000_FW_PRE "iwlwifi-6000-"
+#define IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE __stringify(api) ".ucode"
+
+#define IWL6050_FW_PRE "iwlwifi-6050-"
+#define IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE __stringify(api) ".ucode"
+
+#define IWL6005_FW_PRE "iwlwifi-6000g2a-"
+#define IWL6005_MODULE_FIRMWARE(api) IWL6005_FW_PRE __stringify(api) ".ucode"
+
+#define IWL6030_FW_PRE "iwlwifi-6000g2b-"
+#define IWL6030_MODULE_FIRMWARE(api) IWL6030_FW_PRE __stringify(api) ".ucode"
+
+static const struct iwl_base_params iwl6000_base_params = {
+	.eeprom_size = OTP_LOW_IMAGE_SIZE_2K,
+	.num_of_queues = IWLAGN_NUM_QUEUES,
+	.max_tfd_queue_size = 256,
+	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+	.shadow_ram_support = true,
+	.led_compensation = 51,
+	.wd_timeout = IWL_DEF_WD_TIMEOUT,
+	.max_event_log_size = 512,
+	.shadow_reg_enable = false, /* TODO: fix bugs using this feature */
+	.scd_chain_ext_wa = true,
+};
+
+static const struct iwl_base_params iwl6050_base_params = {
+	.eeprom_size = OTP_LOW_IMAGE_SIZE_2K,
+	.num_of_queues = IWLAGN_NUM_QUEUES,
+	.max_tfd_queue_size = 256,
+	.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
+	.shadow_ram_support = true,
+	.led_compensation = 51,
+	.wd_timeout = IWL_DEF_WD_TIMEOUT,
+	.max_event_log_size = 1024,
+	.shadow_reg_enable = false, /* TODO: fix bugs using this feature */
+	.scd_chain_ext_wa = true,
+};
+
+static const struct iwl_base_params iwl6000_g2_base_params = {
+	.eeprom_size = OTP_LOW_IMAGE_SIZE_2K,
+	.num_of_queues = IWLAGN_NUM_QUEUES,
+	.max_tfd_queue_size = 256,
+	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+	.shadow_ram_support = true,
+	.led_compensation = 57,
+	.wd_timeout = IWL_LONG_WD_TIMEOUT,
+	.max_event_log_size = 512,
+	.shadow_reg_enable = false, /* TODO: fix bugs using this feature */
+	.scd_chain_ext_wa = true,
+};
+
+static const struct iwl_ht_params iwl6000_ht_params = {
+	.ht_greenfield_support = true,
+	.use_rts_for_aggregation = true, /* use rts/cts protection */
+	.ht40_bands = BIT(NL80211_BAND_2GHZ) | BIT(NL80211_BAND_5GHZ),
+};
+
+static const struct iwl_eeprom_params iwl6000_eeprom_params = {
+	.regulatory_bands = {
+		EEPROM_REG_BAND_1_CHANNELS,
+		EEPROM_REG_BAND_2_CHANNELS,
+		EEPROM_REG_BAND_3_CHANNELS,
+		EEPROM_REG_BAND_4_CHANNELS,
+		EEPROM_REG_BAND_5_CHANNELS,
+		EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
+		EEPROM_REG_BAND_52_HT40_CHANNELS
+	},
+	.enhanced_txpower = true,
+};
+
+#define IWL_DEVICE_6005						\
+	.fw_name_pre = IWL6005_FW_PRE,				\
+	.ucode_api_max = IWL6000G2_UCODE_API_MAX,		\
+	.ucode_api_min = IWL6000G2_UCODE_API_MIN,		\
+	.trans.device_family = IWL_DEVICE_FAMILY_6005,		\
+	.max_inst_size = IWL60_RTC_INST_SIZE,			\
+	.max_data_size = IWL60_RTC_DATA_SIZE,			\
+	.nvm_ver = EEPROM_6005_EEPROM_VERSION,		\
+	.nvm_calib_ver = EEPROM_6005_TX_POWER_VERSION,	\
+	.trans.base_params = &iwl6000_g2_base_params,		\
+	.eeprom_params = &iwl6000_eeprom_params,		\
+	.led_mode = IWL_LED_RF_STATE
+
+const struct iwl_cfg iwl6005_2agn_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6205 AGN",
+	IWL_DEVICE_6005,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6005_2abg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6205 ABG",
+	IWL_DEVICE_6005,
+};
+
+const struct iwl_cfg iwl6005_2bg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6205 BG",
+	IWL_DEVICE_6005,
+};
+
+const struct iwl_cfg iwl6005_2agn_sff_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6205S AGN",
+	IWL_DEVICE_6005,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6005_2agn_d_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6205D AGN",
+	IWL_DEVICE_6005,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6005_2agn_mow1_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6206 AGN",
+	IWL_DEVICE_6005,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6005_2agn_mow2_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6207 AGN",
+	IWL_DEVICE_6005,
+	.ht_params = &iwl6000_ht_params,
+};
+
+#define IWL_DEVICE_6030						\
+	.fw_name_pre = IWL6030_FW_PRE,				\
+	.ucode_api_max = IWL6000G2_UCODE_API_MAX,		\
+	.ucode_api_min = IWL6000G2_UCODE_API_MIN,		\
+	.trans.device_family = IWL_DEVICE_FAMILY_6030,		\
+	.max_inst_size = IWL60_RTC_INST_SIZE,			\
+	.max_data_size = IWL60_RTC_DATA_SIZE,			\
+	.nvm_ver = EEPROM_6030_EEPROM_VERSION,		\
+	.nvm_calib_ver = EEPROM_6030_TX_POWER_VERSION,	\
+	.trans.base_params = &iwl6000_g2_base_params,		\
+	.eeprom_params = &iwl6000_eeprom_params,		\
+	.led_mode = IWL_LED_RF_STATE
+
+const struct iwl_cfg iwl6030_2agn_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6230 AGN",
+	IWL_DEVICE_6030,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6030_2abg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6230 ABG",
+	IWL_DEVICE_6030,
+};
+
+const struct iwl_cfg iwl6030_2bgn_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6230 BGN",
+	IWL_DEVICE_6030,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6030_2bg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6230 BG",
+	IWL_DEVICE_6030,
+};
+
+#define IWL_DEVICE_6035						\
+	.fw_name_pre = IWL6030_FW_PRE,				\
+	.ucode_api_max = IWL6035_UCODE_API_MAX,			\
+	.ucode_api_min = IWL6035_UCODE_API_MIN,			\
+	.trans.device_family = IWL_DEVICE_FAMILY_6030,		\
+	.max_inst_size = IWL60_RTC_INST_SIZE,			\
+	.max_data_size = IWL60_RTC_DATA_SIZE,			\
+	.nvm_ver = EEPROM_6030_EEPROM_VERSION,		\
+	.nvm_calib_ver = EEPROM_6030_TX_POWER_VERSION,	\
+	.trans.base_params = &iwl6000_g2_base_params,		\
+	.eeprom_params = &iwl6000_eeprom_params,		\
+	.led_mode = IWL_LED_RF_STATE
+
+const struct iwl_cfg iwl6035_2agn_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6235 AGN",
+	IWL_DEVICE_6035,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6035_2agn_sff_cfg = {
+	.name = "Intel(R) Centrino(R) Ultimate-N 6235 AGN",
+	IWL_DEVICE_6035,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl1030_bgn_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N 1030 BGN",
+	IWL_DEVICE_6030,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl1030_bg_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N 1030 BG",
+	IWL_DEVICE_6030,
+};
+
+const struct iwl_cfg iwl130_bgn_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N 130 BGN",
+	IWL_DEVICE_6030,
+	.ht_params = &iwl6000_ht_params,
+	.rx_with_siso_diversity = true,
+};
+
+const struct iwl_cfg iwl130_bg_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N 130 BG",
+	IWL_DEVICE_6030,
+	.rx_with_siso_diversity = true,
+};
+
+/*
+ * "i": Internal configuration, use internal Power Amplifier
+ */
+#define IWL_DEVICE_6000i					\
+	.fw_name_pre = IWL6000_FW_PRE,				\
+	.ucode_api_max = IWL6000_UCODE_API_MAX,			\
+	.ucode_api_min = IWL6000_UCODE_API_MIN,			\
+	.trans.device_family = IWL_DEVICE_FAMILY_6000i,		\
+	.max_inst_size = IWL60_RTC_INST_SIZE,			\
+	.max_data_size = IWL60_RTC_DATA_SIZE,			\
+	.valid_tx_ant = ANT_BC,		/* .cfg overwrite */	\
+	.valid_rx_ant = ANT_BC,		/* .cfg overwrite */	\
+	.nvm_ver = EEPROM_6000_EEPROM_VERSION,		\
+	.nvm_calib_ver = EEPROM_6000_TX_POWER_VERSION,	\
+	.trans.base_params = &iwl6000_base_params,		\
+	.eeprom_params = &iwl6000_eeprom_params,		\
+	.led_mode = IWL_LED_BLINK
+
+const struct iwl_cfg iwl6000i_2agn_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6200 AGN",
+	IWL_DEVICE_6000i,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6000i_2abg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6200 ABG",
+	IWL_DEVICE_6000i,
+};
+
+const struct iwl_cfg iwl6000i_2bg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6200 BG",
+	IWL_DEVICE_6000i,
+};
+
+#define IWL_DEVICE_6050						\
+	.fw_name_pre = IWL6050_FW_PRE,				\
+	.ucode_api_max = IWL6050_UCODE_API_MAX,			\
+	.ucode_api_min = IWL6050_UCODE_API_MIN,			\
+	.trans.device_family = IWL_DEVICE_FAMILY_6050,		\
+	.max_inst_size = IWL60_RTC_INST_SIZE,			\
+	.max_data_size = IWL60_RTC_DATA_SIZE,			\
+	.valid_tx_ant = ANT_AB,		/* .cfg overwrite */	\
+	.valid_rx_ant = ANT_AB,		/* .cfg overwrite */	\
+	.nvm_ver = EEPROM_6050_EEPROM_VERSION,		\
+	.nvm_calib_ver = EEPROM_6050_TX_POWER_VERSION,	\
+	.trans.base_params = &iwl6050_base_params,		\
+	.eeprom_params = &iwl6000_eeprom_params,		\
+	.led_mode = IWL_LED_BLINK,				\
+	.internal_wimax_coex = true
+
+const struct iwl_cfg iwl6050_2agn_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN",
+	IWL_DEVICE_6050,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6050_2abg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
+	IWL_DEVICE_6050,
+};
+
+#define IWL_DEVICE_6150						\
+	.fw_name_pre = IWL6050_FW_PRE,				\
+	.ucode_api_max = IWL6050_UCODE_API_MAX,			\
+	.ucode_api_min = IWL6050_UCODE_API_MIN,			\
+	.trans.device_family = IWL_DEVICE_FAMILY_6150,		\
+	.max_inst_size = IWL60_RTC_INST_SIZE,			\
+	.max_data_size = IWL60_RTC_DATA_SIZE,			\
+	.nvm_ver = EEPROM_6150_EEPROM_VERSION,		\
+	.nvm_calib_ver = EEPROM_6150_TX_POWER_VERSION,	\
+	.trans.base_params = &iwl6050_base_params,		\
+	.eeprom_params = &iwl6000_eeprom_params,		\
+	.led_mode = IWL_LED_BLINK,				\
+	.internal_wimax_coex = true
+
+const struct iwl_cfg iwl6150_bgn_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN",
+	IWL_DEVICE_6150,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6150_bg_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BG",
+	IWL_DEVICE_6150,
+};
+
+const struct iwl_cfg iwl6000_3agn_cfg = {
+	.name = "Intel(R) Centrino(R) Ultimate-N 6300 AGN",
+	.fw_name_pre = IWL6000_FW_PRE,
+	.ucode_api_max = IWL6000_UCODE_API_MAX,
+	.ucode_api_min = IWL6000_UCODE_API_MIN,
+	.trans.device_family = IWL_DEVICE_FAMILY_6000,
+	.max_inst_size = IWL60_RTC_INST_SIZE,
+	.max_data_size = IWL60_RTC_DATA_SIZE,
+	.nvm_ver = EEPROM_6000_EEPROM_VERSION,
+	.nvm_calib_ver = EEPROM_6000_TX_POWER_VERSION,
+	.trans.base_params = &iwl6000_base_params,
+	.eeprom_params = &iwl6000_eeprom_params,
+	.ht_params = &iwl6000_ht_params,
+	.led_mode = IWL_LED_BLINK,
+};
+
+MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
+MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX));
+MODULE_FIRMWARE(IWL6005_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
+MODULE_FIRMWARE(IWL6030_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));