Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 924 insertions, 0 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/dev.h b/drivers/net/wireless/intel/iwlwifi/dvm/dev.h
new file mode 100644
index 000000000..1a9eadace
--- /dev/null
+++ b/drivers/net/wireless/intel/iwlwifi/dvm/dev.h
@@ -0,0 +1,924 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2014, 2020 Intel Corporation. All rights reserved.
+ *****************************************************************************/
+/*
+ * Please use this file (dev.h) for driver implementation definitions.
+ * Please use commands.h for uCode API definitions.
+ */
+
+#ifndef __iwl_dev_h__
+#define __iwl_dev_h__
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/wait.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+
+#include "fw/img.h"
+#include "iwl-eeprom-parse.h"
+#include "iwl-csr.h"
+#include "iwl-debug.h"
+#include "iwl-agn-hw.h"
+#include "iwl-op-mode.h"
+#include "fw/notif-wait.h"
+#include "iwl-trans.h"
+
+#include "led.h"
+#include "power.h"
+#include "rs.h"
+#include "tt.h"
+
+/* CT-KILL constants */
+#define CT_KILL_THRESHOLD_LEGACY   110 /* in Celsius */
+#define CT_KILL_THRESHOLD	   114 /* in Celsius */
+#define CT_KILL_EXIT_THRESHOLD     95  /* in Celsius */
+
+/* Default noise level to report when noise measurement is not available.
+ *   This may be because we're:
+ *   1)  Not associated  no beacon statistics being sent to driver)
+ *   2)  Scanning (noise measurement does not apply to associated channel)
+ * Use default noise value of -127 ... this is below the range of measurable
+ *   Rx dBm for all agn devices, so it can indicate "unmeasurable" to user.
+ *   Also, -127 works better than 0 when averaging frames with/without
+ *   noise info (e.g. averaging might be done in app); measured dBm values are
+ *   always negative ... using a negative value as the default keeps all
+ *   averages within an s8's (used in some apps) range of negative values. */
+#define IWL_NOISE_MEAS_NOT_AVAILABLE (-127)
+
+/*
+ * RTS threshold here is total size [2347] minus 4 FCS bytes
+ * Per spec:
+ *   a value of 0 means RTS on all data/management packets
+ *   a value > max MSDU size means no RTS
+ * else RTS for data/management frames where MPDU is larger
+ *   than RTS value.
+ */
+#define DEFAULT_RTS_THRESHOLD     2347U
+#define MIN_RTS_THRESHOLD         0U
+#define MAX_RTS_THRESHOLD         2347U
+#define MAX_MSDU_SIZE		  2304U
+#define MAX_MPDU_SIZE		  2346U
+#define DEFAULT_BEACON_INTERVAL   200U
+#define	DEFAULT_SHORT_RETRY_LIMIT 7U
+#define	DEFAULT_LONG_RETRY_LIMIT  4U
+
+#define IWL_NUM_SCAN_RATES         (2)
+
+
+#define IEEE80211_DATA_LEN              2304
+#define IEEE80211_4ADDR_LEN             30
+#define IEEE80211_HLEN                  (IEEE80211_4ADDR_LEN)
+#define IEEE80211_FRAME_LEN             (IEEE80211_DATA_LEN + IEEE80211_HLEN)
+
+#define SUP_RATE_11A_MAX_NUM_CHANNELS  8
+#define SUP_RATE_11B_MAX_NUM_CHANNELS  4
+#define SUP_RATE_11G_MAX_NUM_CHANNELS  12
+
+#define IWL_SUPPORTED_RATES_IE_LEN         8
+
+#define IWL_INVALID_RATE     0xFF
+#define IWL_INVALID_VALUE    -1
+
+union iwl_ht_rate_supp {
+	u16 rates;
+	struct {
+		u8 siso_rate;
+		u8 mimo_rate;
+	};
+};
+
+struct iwl_ht_config {
+	bool single_chain_sufficient;
+	enum ieee80211_smps_mode smps; /* current smps mode */
+};
+
+/* QoS structures */
+struct iwl_qos_info {
+	int qos_active;
+	struct iwl_qosparam_cmd def_qos_parm;
+};
+
+/**
+ * enum iwl_agg_state
+ *
+ * The state machine of the BA agreement establishment / tear down.
+ * These states relate to a specific RA / TID.
+ *
+ * @IWL_AGG_OFF: aggregation is not used
+ * @IWL_AGG_STARTING: aggregation are starting (between start and oper)
+ * @IWL_AGG_ON: aggregation session is up
+ * @IWL_EMPTYING_HW_QUEUE_ADDBA: establishing a BA session - waiting for the
+ *	HW queue to be empty from packets for this RA /TID.
+ * @IWL_EMPTYING_HW_QUEUE_DELBA: tearing down a BA session - waiting for the
+ *	HW queue to be empty from packets for this RA /TID.
+ */
+enum iwl_agg_state {
+	IWL_AGG_OFF = 0,
+	IWL_AGG_STARTING,
+	IWL_AGG_ON,
+	IWL_EMPTYING_HW_QUEUE_ADDBA,
+	IWL_EMPTYING_HW_QUEUE_DELBA,
+};
+
+/**
+ * struct iwl_ht_agg - aggregation state machine
+
+ * This structs holds the states for the BA agreement establishment and tear
+ * down. It also holds the state during the BA session itself. This struct is
+ * duplicated for each RA / TID.
+
+ * @rate_n_flags: Rate at which Tx was attempted. Holds the data between the
+ *	Tx response (REPLY_TX), and the block ack notification
+ *	(REPLY_COMPRESSED_BA).
+ * @state: state of the BA agreement establishment / tear down.
+ * @txq_id: Tx queue used by the BA session
+ * @ssn: the first packet to be sent in AGG HW queue in Tx AGG start flow, or
+ *	the first packet to be sent in legacy HW queue in Tx AGG stop flow.
+ *	Basically when next_reclaimed reaches ssn, we can tell mac80211 that
+ *	we are ready to finish the Tx AGG stop / start flow.
+ * @wait_for_ba: Expect block-ack before next Tx reply
+ */
+struct iwl_ht_agg {
+	u32 rate_n_flags;
+	enum iwl_agg_state state;
+	u16 txq_id;
+	u16 ssn;
+	bool wait_for_ba;
+};
+
+/**
+ * struct iwl_tid_data - one for each RA / TID
+
+ * This structs holds the states for each RA / TID.
+
+ * @seq_number: the next WiFi sequence number to use
+ * @next_reclaimed: the WiFi sequence number of the next packet to be acked.
+ *	This is basically (last acked packet++).
+ * @agg: aggregation state machine
+ */
+struct iwl_tid_data {
+	u16 seq_number;
+	u16 next_reclaimed;
+	struct iwl_ht_agg agg;
+};
+
+/*
+ * Structure should be accessed with sta_lock held. When station addition
+ * is in progress (IWL_STA_UCODE_INPROGRESS) it is possible to access only
+ * the commands (iwl_addsta_cmd and iwl_link_quality_cmd) without sta_lock
+ * held.
+ */
+struct iwl_station_entry {
+	struct iwl_addsta_cmd sta;
+	u8 used, ctxid;
+	struct iwl_link_quality_cmd *lq;
+};
+
+/*
+ * iwl_station_priv: Driver's private station information
+ *
+ * When mac80211 creates a station it reserves some space (hw->sta_data_size)
+ * in the structure for use by driver. This structure is places in that
+ * space.
+ */
+struct iwl_station_priv {
+	struct iwl_rxon_context *ctx;
+	struct iwl_lq_sta lq_sta;
+	atomic_t pending_frames;
+	bool client;
+	bool asleep;
+	u8 max_agg_bufsize;
+	u8 sta_id;
+};
+
+/**
+ * struct iwl_vif_priv - driver's private per-interface information
+ *
+ * When mac80211 allocates a virtual interface, it can allocate
+ * space for us to put data into.
+ */
+struct iwl_vif_priv {
+	struct iwl_rxon_context *ctx;
+	u8 ibss_bssid_sta_id;
+};
+
+struct iwl_sensitivity_ranges {
+	u16 min_nrg_cck;
+
+	u16 nrg_th_cck;
+	u16 nrg_th_ofdm;
+
+	u16 auto_corr_min_ofdm;
+	u16 auto_corr_min_ofdm_mrc;
+	u16 auto_corr_min_ofdm_x1;
+	u16 auto_corr_min_ofdm_mrc_x1;
+
+	u16 auto_corr_max_ofdm;
+	u16 auto_corr_max_ofdm_mrc;
+	u16 auto_corr_max_ofdm_x1;
+	u16 auto_corr_max_ofdm_mrc_x1;
+
+	u16 auto_corr_max_cck;
+	u16 auto_corr_max_cck_mrc;
+	u16 auto_corr_min_cck;
+	u16 auto_corr_min_cck_mrc;
+
+	u16 barker_corr_th_min;
+	u16 barker_corr_th_min_mrc;
+	u16 nrg_th_cca;
+};
+
+/******************************************************************************
+ *
+ * Functions implemented in core module which are forward declared here
+ * for use by iwl-[4-5].c
+ *
+ * NOTE:  The implementation of these functions are not hardware specific
+ * which is why they are in the core module files.
+ *
+ * Naming convention --
+ * iwl_         <-- Is part of iwlwifi
+ * iwlXXXX_     <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
+ *
+ ****************************************************************************/
+void iwl_update_chain_flags(struct iwl_priv *priv);
+extern const u8 iwl_bcast_addr[ETH_ALEN];
+
+#define IWL_OPERATION_MODE_AUTO     0
+#define IWL_OPERATION_MODE_HT_ONLY  1
+#define IWL_OPERATION_MODE_MIXED    2
+#define IWL_OPERATION_MODE_20MHZ    3
+
+#define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000
+
+/* Sensitivity and chain noise calibration */
+#define INITIALIZATION_VALUE		0xFFFF
+#define IWL_CAL_NUM_BEACONS		16
+#define MAXIMUM_ALLOWED_PATHLOSS	15
+
+#define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
+
+#define MAX_FA_OFDM  50
+#define MIN_FA_OFDM  5
+#define MAX_FA_CCK   50
+#define MIN_FA_CCK   5
+
+#define AUTO_CORR_STEP_OFDM       1
+
+#define AUTO_CORR_STEP_CCK     3
+#define AUTO_CORR_MAX_TH_CCK   160
+
+#define NRG_DIFF               2
+#define NRG_STEP_CCK           2
+#define NRG_MARGIN             8
+#define MAX_NUMBER_CCK_NO_FA 100
+
+#define AUTO_CORR_CCK_MIN_VAL_DEF    (125)
+
+#define CHAIN_A             0
+#define CHAIN_B             1
+#define CHAIN_C             2
+#define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4
+#define ALL_BAND_FILTER			0xFF00
+#define IN_BAND_FILTER			0xFF
+#define MIN_AVERAGE_NOISE_MAX_VALUE	0xFFFFFFFF
+
+#define NRG_NUM_PREV_STAT_L     20
+#define NUM_RX_CHAINS           3
+
+enum iwlagn_false_alarm_state {
+	IWL_FA_TOO_MANY = 0,
+	IWL_FA_TOO_FEW = 1,
+	IWL_FA_GOOD_RANGE = 2,
+};
+
+enum iwlagn_chain_noise_state {
+	IWL_CHAIN_NOISE_ALIVE = 0,  /* must be 0 */
+	IWL_CHAIN_NOISE_ACCUMULATE,
+	IWL_CHAIN_NOISE_CALIBRATED,
+	IWL_CHAIN_NOISE_DONE,
+};
+
+/* Sensitivity calib data */
+struct iwl_sensitivity_data {
+	u32 auto_corr_ofdm;
+	u32 auto_corr_ofdm_mrc;
+	u32 auto_corr_ofdm_x1;
+	u32 auto_corr_ofdm_mrc_x1;
+	u32 auto_corr_cck;
+	u32 auto_corr_cck_mrc;
+
+	u32 last_bad_plcp_cnt_ofdm;
+	u32 last_fa_cnt_ofdm;
+	u32 last_bad_plcp_cnt_cck;
+	u32 last_fa_cnt_cck;
+
+	u32 nrg_curr_state;
+	u32 nrg_prev_state;
+	u32 nrg_value[10];
+	u8  nrg_silence_rssi[NRG_NUM_PREV_STAT_L];
+	u32 nrg_silence_ref;
+	u32 nrg_energy_idx;
+	u32 nrg_silence_idx;
+	u32 nrg_th_cck;
+	s32 nrg_auto_corr_silence_diff;
+	u32 num_in_cck_no_fa;
+	u32 nrg_th_ofdm;
+
+	u16 barker_corr_th_min;
+	u16 barker_corr_th_min_mrc;
+	u16 nrg_th_cca;
+};
+
+/* Chain noise (differential Rx gain) calib data */
+struct iwl_chain_noise_data {
+	u32 active_chains;
+	u32 chain_noise_a;
+	u32 chain_noise_b;
+	u32 chain_noise_c;
+	u32 chain_signal_a;
+	u32 chain_signal_b;
+	u32 chain_signal_c;
+	u16 beacon_count;
+	u8 disconn_array[NUM_RX_CHAINS];
+	u8 delta_gain_code[NUM_RX_CHAINS];
+	u8 radio_write;
+	u8 state;
+};
+
+enum {
+	MEASUREMENT_READY = (1 << 0),
+	MEASUREMENT_ACTIVE = (1 << 1),
+};
+
+/* reply_tx_statistics (for _agn devices) */
+struct reply_tx_error_statistics {
+	u32 pp_delay;
+	u32 pp_few_bytes;
+	u32 pp_bt_prio;
+	u32 pp_quiet_period;
+	u32 pp_calc_ttak;
+	u32 int_crossed_retry;
+	u32 short_limit;
+	u32 long_limit;
+	u32 fifo_underrun;
+	u32 drain_flow;
+	u32 rfkill_flush;
+	u32 life_expire;
+	u32 dest_ps;
+	u32 host_abort;
+	u32 bt_retry;
+	u32 sta_invalid;
+	u32 frag_drop;
+	u32 tid_disable;
+	u32 fifo_flush;
+	u32 insuff_cf_poll;
+	u32 fail_hw_drop;
+	u32 sta_color_mismatch;
+	u32 unknown;
+};
+
+/* reply_agg_tx_statistics (for _agn devices) */
+struct reply_agg_tx_error_statistics {
+	u32 underrun;
+	u32 bt_prio;
+	u32 few_bytes;
+	u32 abort;
+	u32 last_sent_ttl;
+	u32 last_sent_try;
+	u32 last_sent_bt_kill;
+	u32 scd_query;
+	u32 bad_crc32;
+	u32 response;
+	u32 dump_tx;
+	u32 delay_tx;
+	u32 unknown;
+};
+
+/*
+ * schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds
+ * to perform continuous uCode event logging operation if enabled
+ */
+#define UCODE_TRACE_PERIOD (10)
+
+/*
+ * iwl_event_log: current uCode event log position
+ *
+ * @ucode_trace: enable/disable ucode continuous trace timer
+ * @num_wraps: how many times the event buffer wraps
+ * @next_entry:  the entry just before the next one that uCode would fill
+ * @non_wraps_count: counter for no wrap detected when dump ucode events
+ * @wraps_once_count: counter for wrap once detected when dump ucode events
+ * @wraps_more_count: counter for wrap more than once detected
+ *		      when dump ucode events
+ */
+struct iwl_event_log {
+	bool ucode_trace;
+	u32 num_wraps;
+	u32 next_entry;
+	int non_wraps_count;
+	int wraps_once_count;
+	int wraps_more_count;
+};
+
+#define IWL_DELAY_NEXT_FORCE_RF_RESET  (HZ*3)
+
+/* BT Antenna Coupling Threshold (dB) */
+#define IWL_BT_ANTENNA_COUPLING_THRESHOLD	(35)
+
+/* Firmware reload counter and Timestamp */
+#define IWL_MIN_RELOAD_DURATION		1000 /* 1000 ms */
+#define IWL_MAX_CONTINUE_RELOAD_CNT	4
+
+
+struct iwl_rf_reset {
+	int reset_request_count;
+	int reset_success_count;
+	int reset_reject_count;
+	unsigned long last_reset_jiffies;
+};
+
+enum iwl_rxon_context_id {
+	IWL_RXON_CTX_BSS,
+	IWL_RXON_CTX_PAN,
+
+	NUM_IWL_RXON_CTX
+};
+
+/* extend beacon time format bit shifting  */
+/*
+ * for _agn devices
+ * bits 31:22 - extended
+ * bits 21:0  - interval
+ */
+#define IWLAGN_EXT_BEACON_TIME_POS	22
+
+struct iwl_rxon_context {
+	struct ieee80211_vif *vif;
+
+	u8 mcast_queue;
+	u8 ac_to_queue[IEEE80211_NUM_ACS];
+	u8 ac_to_fifo[IEEE80211_NUM_ACS];
+
+	/*
+	 * We could use the vif to indicate active, but we
+	 * also need it to be active during disabling when
+	 * we already removed the vif for type setting.
+	 */
+	bool always_active, is_active;
+
+	bool ht_need_multiple_chains;
+
+	enum iwl_rxon_context_id ctxid;
+
+	u32 interface_modes, exclusive_interface_modes;
+	u8 unused_devtype, ap_devtype, ibss_devtype, station_devtype;
+
+	/*
+	 * We declare this const so it can only be
+	 * changed via explicit cast within the
+	 * routines that actually update the physical
+	 * hardware.
+	 */
+	const struct iwl_rxon_cmd active;
+	struct iwl_rxon_cmd staging;
+
+	struct iwl_rxon_time_cmd timing;
+
+	struct iwl_qos_info qos_data;
+
+	u8 bcast_sta_id, ap_sta_id;
+
+	u8 rxon_cmd, rxon_assoc_cmd, rxon_timing_cmd;
+	u8 qos_cmd;
+	u8 wep_key_cmd;
+
+	struct iwl_wep_key wep_keys[WEP_KEYS_MAX];
+	u8 key_mapping_keys;
+
+	__le32 station_flags;
+
+	int beacon_int;
+
+	struct {
+		bool non_gf_sta_present;
+		u8 protection;
+		bool enabled, is_40mhz;
+		u8 extension_chan_offset;
+	} ht;
+};
+
+enum iwl_scan_type {
+	IWL_SCAN_NORMAL,
+	IWL_SCAN_RADIO_RESET,
+};
+
+/**
+ * struct iwl_hw_params
+ *
+ * Holds the module parameters
+ *
+ * @tx_chains_num: Number of TX chains
+ * @rx_chains_num: Number of RX chains
+ * @ct_kill_threshold: temperature threshold - in hw dependent unit
+ * @ct_kill_exit_threshold: when to reeable the device - in hw dependent unit
+ *	relevant for 1000, 6000 and up
+ * @struct iwl_sensitivity_ranges: range of sensitivity values
+ * @use_rts_for_aggregation: use rts/cts protection for HT traffic
+ */
+struct iwl_hw_params {
+	u8  tx_chains_num;
+	u8  rx_chains_num;
+	bool use_rts_for_aggregation;
+	u32 ct_kill_threshold;
+	u32 ct_kill_exit_threshold;
+
+	const struct iwl_sensitivity_ranges *sens;
+};
+
+/**
+ * struct iwl_dvm_bt_params - DVM specific BT (coex) parameters
+ * @advanced_bt_coexist: support advanced bt coexist
+ * @bt_init_traffic_load: specify initial bt traffic load
+ * @bt_prio_boost: default bt priority boost value
+ * @agg_time_limit: maximum number of uSec in aggregation
+ * @bt_sco_disable: uCode should not response to BT in SCO/ESCO mode
+ */
+struct iwl_dvm_bt_params {
+	bool advanced_bt_coexist;
+	u8 bt_init_traffic_load;
+	u32 bt_prio_boost;
+	u16 agg_time_limit;
+	bool bt_sco_disable;
+	bool bt_session_2;
+};
+
+/**
+ * struct iwl_dvm_cfg - DVM firmware specific device configuration
+ * @set_hw_params: set hardware parameters
+ * @set_channel_switch: send channel switch command
+ * @nic_config: apply device specific configuration
+ * @temperature: read temperature
+ * @adv_thermal_throttle: support advance thermal throttle
+ * @support_ct_kill_exit: support ct kill exit condition
+ * @plcp_delta_threshold: plcp error rate threshold used to trigger
+ *	radio tuning when there is a high receiving plcp error rate
+ * @chain_noise_scale: default chain noise scale used for gain computation
+ * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up
+ * @no_idle_support: do not support idle mode
+ * @bt_params: pointer to BT parameters
+ * @need_temp_offset_calib: need to perform temperature offset calibration
+ * @no_xtal_calib: some devices do not need crystal calibration data,
+ *	don't send it to those
+ * @temp_offset_v2: support v2 of temperature offset calibration
+ * @adv_pm: advanced power management
+ */
+struct iwl_dvm_cfg {
+	void (*set_hw_params)(struct iwl_priv *priv);
+	int (*set_channel_switch)(struct iwl_priv *priv,
+				  struct ieee80211_channel_switch *ch_switch);
+	void (*nic_config)(struct iwl_priv *priv);
+	void (*temperature)(struct iwl_priv *priv);
+
+	const struct iwl_dvm_bt_params *bt_params;
+	s32 chain_noise_scale;
+	u8 plcp_delta_threshold;
+	bool adv_thermal_throttle;
+	bool support_ct_kill_exit;
+	bool hd_v2;
+	bool no_idle_support;
+	bool need_temp_offset_calib;
+	bool no_xtal_calib;
+	bool temp_offset_v2;
+	bool adv_pm;
+};
+
+struct iwl_wipan_noa_data {
+	struct rcu_head rcu_head;
+	u32 length;
+	u8 data[];
+};
+
+/* Calibration disabling bit mask */
+enum {
+	IWL_CALIB_ENABLE_ALL			= 0,
+
+	IWL_SENSITIVITY_CALIB_DISABLED		= BIT(0),
+	IWL_CHAIN_NOISE_CALIB_DISABLED		= BIT(1),
+	IWL_TX_POWER_CALIB_DISABLED		= BIT(2),
+
+	IWL_CALIB_DISABLE_ALL			= 0xFFFFFFFF,
+};
+
+#define IWL_OP_MODE_GET_DVM(_iwl_op_mode) \
+	((struct iwl_priv *) ((_iwl_op_mode)->op_mode_specific))
+
+#define IWL_MAC80211_GET_DVM(_hw) \
+	((struct iwl_priv *) ((struct iwl_op_mode *) \
+	(_hw)->priv)->op_mode_specific)
+
+struct iwl_priv {
+
+	struct iwl_trans *trans;
+	struct device *dev;		/* for debug prints only */
+	const struct iwl_cfg *cfg;
+	const struct iwl_fw *fw;
+	const struct iwl_dvm_cfg *lib;
+	unsigned long status;
+
+	spinlock_t sta_lock;
+	struct mutex mutex;
+
+	unsigned long transport_queue_stop;
+	bool passive_no_rx;
+#define IWL_INVALID_MAC80211_QUEUE	0xff
+	u8 queue_to_mac80211[IWL_MAX_HW_QUEUES];
+	atomic_t queue_stop_count[IWL_MAX_HW_QUEUES];
+
+	unsigned long agg_q_alloc[BITS_TO_LONGS(IWL_MAX_HW_QUEUES)];
+
+	/* ieee device used by generic ieee processing code */
+	struct ieee80211_hw *hw;
+
+	struct napi_struct *napi;
+
+	struct list_head calib_results;
+
+	struct workqueue_struct *workqueue;
+
+	struct iwl_hw_params hw_params;
+
+	enum nl80211_band band;
+	u8 valid_contexts;
+
+	void (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv,
+				       struct iwl_rx_cmd_buffer *rxb);
+
+	struct iwl_notif_wait_data notif_wait;
+
+	/* spectrum measurement report caching */
+	struct iwl_spectrum_notification measure_report;
+	u8 measurement_status;
+
+	/* ucode beacon time */
+	u32 ucode_beacon_time;
+	int missed_beacon_threshold;
+
+	/* track IBSS manager (last beacon) status */
+	u32 ibss_manager;
+
+	/* jiffies when last recovery from statistics was performed */
+	unsigned long rx_statistics_jiffies;
+
+	/*counters */
+	u32 rx_handlers_stats[REPLY_MAX];
+
+	/* rf reset */
+	struct iwl_rf_reset rf_reset;
+
+	/* firmware reload counter and timestamp */
+	unsigned long reload_jiffies;
+	int reload_count;
+	bool ucode_loaded;
+
+	u8 plcp_delta_threshold;
+
+	/* thermal calibration */
+	s32 temperature;	/* Celsius */
+	s32 last_temperature;
+
+	struct iwl_wipan_noa_data __rcu *noa_data;
+
+	/* Scan related variables */
+	unsigned long scan_start;
+	unsigned long scan_start_tsf;
+	size_t scan_cmd_size;
+	void *scan_cmd;
+	enum nl80211_band scan_band;
+	struct cfg80211_scan_request *scan_request;
+	struct ieee80211_vif *scan_vif;
+	enum iwl_scan_type scan_type;
+	u8 scan_tx_ant[NUM_NL80211_BANDS];
+	u8 mgmt_tx_ant;
+
+	/* max number of station keys */
+	u8 sta_key_max_num;
+
+	bool new_scan_threshold_behaviour;
+
+	bool wowlan;
+
+	/* EEPROM MAC addresses */
+	struct mac_address addresses[2];
+
+	struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX];
+
+	__le16 switch_channel;
+
+	u8 start_calib;
+	struct iwl_sensitivity_data sensitivity_data;
+	struct iwl_chain_noise_data chain_noise_data;
+	__le16 sensitivity_tbl[HD_TABLE_SIZE];
+	__le16 enhance_sensitivity_tbl[ENHANCE_HD_TABLE_ENTRIES];
+
+	struct iwl_ht_config current_ht_config;
+
+	/* Rate scaling data */
+	u8 retry_rate;
+
+	int activity_timer_active;
+
+	struct iwl_power_mgr power_data;
+	struct iwl_tt_mgmt thermal_throttle;
+
+	/* station table variables */
+	int num_stations;
+	struct iwl_station_entry stations[IWLAGN_STATION_COUNT];
+	unsigned long ucode_key_table;
+	struct iwl_tid_data tid_data[IWLAGN_STATION_COUNT][IWL_MAX_TID_COUNT];
+	atomic_t num_aux_in_flight;
+
+	u8 mac80211_registered;
+
+	/* Indication if ieee80211_ops->open has been called */
+	u8 is_open;
+
+	enum nl80211_iftype iw_mode;
+
+	/* Last Rx'd beacon timestamp */
+	u64 timestamp;
+
+	struct {
+		__le32 flag;
+		struct statistics_general_common common;
+		struct statistics_rx_non_phy rx_non_phy;
+		struct statistics_rx_phy rx_ofdm;
+		struct statistics_rx_ht_phy rx_ofdm_ht;
+		struct statistics_rx_phy rx_cck;
+		struct statistics_tx tx;
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+		struct statistics_bt_activity bt_activity;
+		__le32 num_bt_kills, accum_num_bt_kills;
+#endif
+		spinlock_t lock;
+	} statistics;
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+	struct {
+		struct statistics_general_common common;
+		struct statistics_rx_non_phy rx_non_phy;
+		struct statistics_rx_phy rx_ofdm;
+		struct statistics_rx_ht_phy rx_ofdm_ht;
+		struct statistics_rx_phy rx_cck;
+		struct statistics_tx tx;
+		struct statistics_bt_activity bt_activity;
+	} accum_stats, delta_stats, max_delta_stats;
+#endif
+
+	/*
+	 * reporting the number of tids has AGG on. 0 means
+	 * no AGGREGATION
+	 */
+	u8 agg_tids_count;
+
+	struct iwl_rx_phy_res last_phy_res;
+	u32 ampdu_ref;
+	bool last_phy_res_valid;
+
+	/*
+	 * chain noise reset and gain commands are the
+	 * two extra calibration commands follows the standard
+	 * phy calibration commands
+	 */
+	u8 phy_calib_chain_noise_reset_cmd;
+	u8 phy_calib_chain_noise_gain_cmd;
+
+	/* counts reply_tx error */
+	struct reply_tx_error_statistics reply_tx_stats;
+	struct reply_agg_tx_error_statistics reply_agg_tx_stats;
+
+	/* bt coex */
+	u8 bt_enable_flag;
+	u8 bt_status;
+	u8 bt_traffic_load, last_bt_traffic_load;
+	bool bt_ch_announce;
+	bool bt_full_concurrent;
+	__le32 kill_ack_mask;
+	__le32 kill_cts_mask;
+	__le16 bt_valid;
+	bool reduced_txpower;
+	u16 bt_on_thresh;
+	u16 bt_duration;
+	u16 dynamic_frag_thresh;
+	u8 bt_ci_compliance;
+	struct work_struct bt_traffic_change_work;
+	bool bt_enable_pspoll;
+	struct iwl_rxon_context *cur_rssi_ctx;
+	bool bt_is_sco;
+
+	struct work_struct restart;
+	struct work_struct scan_completed;
+	struct work_struct abort_scan;
+
+	struct work_struct beacon_update;
+	struct iwl_rxon_context *beacon_ctx;
+	struct sk_buff *beacon_skb;
+	void *beacon_cmd;
+
+	struct work_struct tt_work;
+	struct work_struct ct_enter;
+	struct work_struct ct_exit;
+	struct work_struct start_internal_scan;
+	struct work_struct tx_flush;
+	struct work_struct bt_full_concurrency;
+	struct work_struct bt_runtime_config;
+
+	struct delayed_work scan_check;
+
+	/* TX Power settings */
+	s8 tx_power_user_lmt;
+	s8 tx_power_next;
+
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+	/* debugfs */
+	struct dentry *debugfs_dir;
+	u32 dbgfs_sram_offset, dbgfs_sram_len;
+	bool disable_ht40;
+	void *wowlan_sram;
+#endif /* CONFIG_IWLWIFI_DEBUGFS */
+
+	struct iwl_nvm_data *nvm_data;
+	/* eeprom blob for debugfs */
+	u8 *eeprom_blob;
+	size_t eeprom_blob_size;
+
+	struct work_struct txpower_work;
+	u32 calib_disabled;
+	struct work_struct run_time_calib_work;
+	struct timer_list statistics_periodic;
+	struct timer_list ucode_trace;
+
+	struct iwl_event_log event_log;
+
+#ifdef CONFIG_IWLWIFI_LEDS
+	struct led_classdev led;
+	unsigned long blink_on, blink_off;
+	bool led_registered;
+#endif
+
+	/* WoWLAN GTK rekey data */
+	u8 kck[NL80211_KCK_LEN], kek[NL80211_KEK_LEN];
+	__le64 replay_ctr;
+	__le16 last_seq_ctl;
+	bool have_rekey_data;
+#ifdef CONFIG_PM_SLEEP
+	struct wiphy_wowlan_support wowlan_support;
+#endif
+
+	/* device_pointers: pointers to ucode event tables */
+	struct {
+		u32 error_event_table;
+		u32 log_event_table;
+	} device_pointers;
+
+	/* indicator of loaded ucode image */
+	enum iwl_ucode_type cur_ucode;
+}; /*iwl_priv */
+
+static inline struct iwl_rxon_context *
+iwl_rxon_ctx_from_vif(struct ieee80211_vif *vif)
+{
+	struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
+
+	return vif_priv->ctx;
+}
+
+#define for_each_context(priv, ctx)				\
+	for (ctx = &priv->contexts[IWL_RXON_CTX_BSS];		\
+	     ctx < &priv->contexts[NUM_IWL_RXON_CTX]; ctx++)	\
+		if (priv->valid_contexts & BIT(ctx->ctxid))
+
+static inline int iwl_is_associated_ctx(struct iwl_rxon_context *ctx)
+{
+	return (ctx->active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
+}
+
+static inline int iwl_is_associated(struct iwl_priv *priv,
+				    enum iwl_rxon_context_id ctxid)
+{
+	return iwl_is_associated_ctx(&priv->contexts[ctxid]);
+}
+
+static inline int iwl_is_any_associated(struct iwl_priv *priv)
+{
+	struct iwl_rxon_context *ctx;
+	for_each_context(priv, ctx)
+		if (iwl_is_associated_ctx(ctx))
+			return true;
+	return false;
+}
+
+#endif				/* __iwl_dev_h__ */