Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 420 insertions, 0 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/ucode.c b/drivers/net/wireless/intel/iwlwifi/dvm/ucode.c
new file mode 100644
index 000000000..bb13ca5d6
--- /dev/null
+++ b/drivers/net/wireless/intel/iwlwifi/dvm/ucode.c
@@ -0,0 +1,420 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/******************************************************************************
+ *
+ * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved.
+ * Copyright(c) 2015 Intel Deutschland GmbH
+ *****************************************************************************/
+
+#include <linux/kernel.h>
+
+#include "iwl-io.h"
+#include "iwl-agn-hw.h"
+#include "iwl-trans.h"
+#include "iwl-fh.h"
+#include "iwl-op-mode.h"
+
+#include "dev.h"
+#include "agn.h"
+#include "calib.h"
+
+/******************************************************************************
+ *
+ * uCode download functions
+ *
+ ******************************************************************************/
+
+/*
+ *  Calibration
+ */
+static int iwl_set_Xtal_calib(struct iwl_priv *priv)
+{
+	struct iwl_calib_xtal_freq_cmd cmd;
+	__le16 *xtal_calib = priv->nvm_data->xtal_calib;
+
+	iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD);
+	cmd.cap_pin1 = le16_to_cpu(xtal_calib[0]);
+	cmd.cap_pin2 = le16_to_cpu(xtal_calib[1]);
+	return iwl_calib_set(priv, (void *)&cmd, sizeof(cmd));
+}
+
+static int iwl_set_temperature_offset_calib(struct iwl_priv *priv)
+{
+	struct iwl_calib_temperature_offset_cmd cmd;
+
+	memset(&cmd, 0, sizeof(cmd));
+	iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD);
+	cmd.radio_sensor_offset = priv->nvm_data->raw_temperature;
+	if (!(cmd.radio_sensor_offset))
+		cmd.radio_sensor_offset = DEFAULT_RADIO_SENSOR_OFFSET;
+
+	IWL_DEBUG_CALIB(priv, "Radio sensor offset: %d\n",
+			le16_to_cpu(cmd.radio_sensor_offset));
+	return iwl_calib_set(priv, (void *)&cmd, sizeof(cmd));
+}
+
+static int iwl_set_temperature_offset_calib_v2(struct iwl_priv *priv)
+{
+	struct iwl_calib_temperature_offset_v2_cmd cmd;
+
+	memset(&cmd, 0, sizeof(cmd));
+	iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD);
+	cmd.radio_sensor_offset_high = priv->nvm_data->kelvin_temperature;
+	cmd.radio_sensor_offset_low = priv->nvm_data->raw_temperature;
+	if (!cmd.radio_sensor_offset_low) {
+		IWL_DEBUG_CALIB(priv, "no info in EEPROM, use default\n");
+		cmd.radio_sensor_offset_low = DEFAULT_RADIO_SENSOR_OFFSET;
+		cmd.radio_sensor_offset_high = DEFAULT_RADIO_SENSOR_OFFSET;
+	}
+	cmd.burntVoltageRef = priv->nvm_data->calib_voltage;
+
+	IWL_DEBUG_CALIB(priv, "Radio sensor offset high: %d\n",
+			le16_to_cpu(cmd.radio_sensor_offset_high));
+	IWL_DEBUG_CALIB(priv, "Radio sensor offset low: %d\n",
+			le16_to_cpu(cmd.radio_sensor_offset_low));
+	IWL_DEBUG_CALIB(priv, "Voltage Ref: %d\n",
+			le16_to_cpu(cmd.burntVoltageRef));
+
+	return iwl_calib_set(priv, (void *)&cmd, sizeof(cmd));
+}
+
+static int iwl_send_calib_cfg(struct iwl_priv *priv)
+{
+	struct iwl_calib_cfg_cmd calib_cfg_cmd;
+	struct iwl_host_cmd cmd = {
+		.id = CALIBRATION_CFG_CMD,
+		.len = { sizeof(struct iwl_calib_cfg_cmd), },
+		.data = { &calib_cfg_cmd, },
+	};
+
+	memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd));
+	calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_INIT_CFG_ALL;
+	calib_cfg_cmd.ucd_calib_cfg.once.start = IWL_CALIB_INIT_CFG_ALL;
+	calib_cfg_cmd.ucd_calib_cfg.once.send_res = IWL_CALIB_INIT_CFG_ALL;
+	calib_cfg_cmd.ucd_calib_cfg.flags =
+		IWL_CALIB_CFG_FLAG_SEND_COMPLETE_NTFY_MSK;
+
+	return iwl_dvm_send_cmd(priv, &cmd);
+}
+
+int iwl_init_alive_start(struct iwl_priv *priv)
+{
+	int ret;
+
+	if (priv->lib->bt_params &&
+	    priv->lib->bt_params->advanced_bt_coexist) {
+		/*
+		 * Tell uCode we are ready to perform calibration
+		 * need to perform this before any calibration
+		 * no need to close the envlope since we are going
+		 * to load the runtime uCode later.
+		 */
+		ret = iwl_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
+			BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
+		if (ret)
+			return ret;
+
+	}
+
+	ret = iwl_send_calib_cfg(priv);
+	if (ret)
+		return ret;
+
+	/**
+	 * temperature offset calibration is only needed for runtime ucode,
+	 * so prepare the value now.
+	 */
+	if (priv->lib->need_temp_offset_calib) {
+		if (priv->lib->temp_offset_v2)
+			return iwl_set_temperature_offset_calib_v2(priv);
+		else
+			return iwl_set_temperature_offset_calib(priv);
+	}
+
+	return 0;
+}
+
+static int iwl_send_wimax_coex(struct iwl_priv *priv)
+{
+	struct iwl_wimax_coex_cmd coex_cmd;
+
+	/* coexistence is disabled */
+	memset(&coex_cmd, 0, sizeof(coex_cmd));
+
+	return iwl_dvm_send_cmd_pdu(priv,
+				COEX_PRIORITY_TABLE_CMD, 0,
+				sizeof(coex_cmd), &coex_cmd);
+}
+
+static const u8 iwl_bt_prio_tbl[BT_COEX_PRIO_TBL_EVT_MAX] = {
+	((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_LOW << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_LOW << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_HIGH << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_HIGH << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_COEX_OFF << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_COEX_ON << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	0, 0, 0, 0, 0, 0, 0
+};
+
+void iwl_send_prio_tbl(struct iwl_priv *priv)
+{
+	struct iwl_bt_coex_prio_table_cmd prio_tbl_cmd;
+
+	memcpy(prio_tbl_cmd.prio_tbl, iwl_bt_prio_tbl,
+		sizeof(iwl_bt_prio_tbl));
+	if (iwl_dvm_send_cmd_pdu(priv,
+				REPLY_BT_COEX_PRIO_TABLE, 0,
+				sizeof(prio_tbl_cmd), &prio_tbl_cmd))
+		IWL_ERR(priv, "failed to send BT prio tbl command\n");
+}
+
+int iwl_send_bt_env(struct iwl_priv *priv, u8 action, u8 type)
+{
+	struct iwl_bt_coex_prot_env_cmd env_cmd;
+	int ret;
+
+	env_cmd.action = action;
+	env_cmd.type = type;
+	ret = iwl_dvm_send_cmd_pdu(priv,
+			       REPLY_BT_COEX_PROT_ENV, 0,
+			       sizeof(env_cmd), &env_cmd);
+	if (ret)
+		IWL_ERR(priv, "failed to send BT env command\n");
+	return ret;
+}
+
+static const u8 iwlagn_default_queue_to_tx_fifo[] = {
+	IWL_TX_FIFO_VO,
+	IWL_TX_FIFO_VI,
+	IWL_TX_FIFO_BE,
+	IWL_TX_FIFO_BK,
+};
+
+static const u8 iwlagn_ipan_queue_to_tx_fifo[] = {
+	IWL_TX_FIFO_VO,
+	IWL_TX_FIFO_VI,
+	IWL_TX_FIFO_BE,
+	IWL_TX_FIFO_BK,
+	IWL_TX_FIFO_BK_IPAN,
+	IWL_TX_FIFO_BE_IPAN,
+	IWL_TX_FIFO_VI_IPAN,
+	IWL_TX_FIFO_VO_IPAN,
+	IWL_TX_FIFO_BE_IPAN,
+	IWL_TX_FIFO_UNUSED,
+	IWL_TX_FIFO_AUX,
+};
+
+static int iwl_alive_notify(struct iwl_priv *priv)
+{
+	const u8 *queue_to_txf;
+	u8 n_queues;
+	int ret;
+	int i;
+
+	iwl_trans_fw_alive(priv->trans, 0);
+
+	if (priv->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PAN &&
+	    priv->nvm_data->sku_cap_ipan_enable) {
+		n_queues = ARRAY_SIZE(iwlagn_ipan_queue_to_tx_fifo);
+		queue_to_txf = iwlagn_ipan_queue_to_tx_fifo;
+	} else {
+		n_queues = ARRAY_SIZE(iwlagn_default_queue_to_tx_fifo);
+		queue_to_txf = iwlagn_default_queue_to_tx_fifo;
+	}
+
+	for (i = 0; i < n_queues; i++)
+		if (queue_to_txf[i] != IWL_TX_FIFO_UNUSED)
+			iwl_trans_ac_txq_enable(priv->trans, i,
+						queue_to_txf[i], 0);
+
+	priv->passive_no_rx = false;
+	priv->transport_queue_stop = 0;
+
+	ret = iwl_send_wimax_coex(priv);
+	if (ret)
+		return ret;
+
+	if (!priv->lib->no_xtal_calib) {
+		ret = iwl_set_Xtal_calib(priv);
+		if (ret)
+			return ret;
+	}
+
+	return iwl_send_calib_results(priv);
+}
+
+struct iwl_alive_data {
+	bool valid;
+	u8 subtype;
+};
+
+static bool iwl_alive_fn(struct iwl_notif_wait_data *notif_wait,
+			 struct iwl_rx_packet *pkt, void *data)
+{
+	struct iwl_priv *priv =
+		container_of(notif_wait, struct iwl_priv, notif_wait);
+	struct iwl_alive_data *alive_data = data;
+	struct iwl_alive_resp *palive;
+
+	palive = (void *)pkt->data;
+
+	IWL_DEBUG_FW(priv, "Alive ucode status 0x%08X revision "
+		       "0x%01X 0x%01X\n",
+		       palive->is_valid, palive->ver_type,
+		       palive->ver_subtype);
+
+	priv->device_pointers.error_event_table =
+		le32_to_cpu(palive->error_event_table_ptr);
+	priv->device_pointers.log_event_table =
+		le32_to_cpu(palive->log_event_table_ptr);
+
+	alive_data->subtype = palive->ver_subtype;
+	alive_data->valid = palive->is_valid == UCODE_VALID_OK;
+
+	return true;
+}
+
+#define UCODE_ALIVE_TIMEOUT	HZ
+#define UCODE_CALIB_TIMEOUT	(2*HZ)
+
+int iwl_load_ucode_wait_alive(struct iwl_priv *priv,
+				 enum iwl_ucode_type ucode_type)
+{
+	struct iwl_notification_wait alive_wait;
+	struct iwl_alive_data alive_data;
+	const struct fw_img *fw;
+	int ret;
+	enum iwl_ucode_type old_type;
+	static const u16 alive_cmd[] = { REPLY_ALIVE };
+
+	fw = iwl_get_ucode_image(priv->fw, ucode_type);
+	if (WARN_ON(!fw))
+		return -EINVAL;
+
+	old_type = priv->cur_ucode;
+	priv->cur_ucode = ucode_type;
+	priv->ucode_loaded = false;
+
+	iwl_init_notification_wait(&priv->notif_wait, &alive_wait,
+				   alive_cmd, ARRAY_SIZE(alive_cmd),
+				   iwl_alive_fn, &alive_data);
+
+	ret = iwl_trans_start_fw(priv->trans, fw, false);
+	if (ret) {
+		priv->cur_ucode = old_type;
+		iwl_remove_notification(&priv->notif_wait, &alive_wait);
+		return ret;
+	}
+
+	/*
+	 * Some things may run in the background now, but we
+	 * just wait for the ALIVE notification here.
+	 */
+	ret = iwl_wait_notification(&priv->notif_wait, &alive_wait,
+					UCODE_ALIVE_TIMEOUT);
+	if (ret) {
+		priv->cur_ucode = old_type;
+		return ret;
+	}
+
+	if (!alive_data.valid) {
+		IWL_ERR(priv, "Loaded ucode is not valid!\n");
+		priv->cur_ucode = old_type;
+		return -EIO;
+	}
+
+	priv->ucode_loaded = true;
+
+	if (ucode_type != IWL_UCODE_WOWLAN) {
+		/* delay a bit to give rfkill time to run */
+		msleep(5);
+	}
+
+	ret = iwl_alive_notify(priv);
+	if (ret) {
+		IWL_WARN(priv,
+			"Could not complete ALIVE transition: %d\n", ret);
+		priv->cur_ucode = old_type;
+		return ret;
+	}
+
+	return 0;
+}
+
+static bool iwlagn_wait_calib(struct iwl_notif_wait_data *notif_wait,
+			      struct iwl_rx_packet *pkt, void *data)
+{
+	struct iwl_priv *priv = data;
+	struct iwl_calib_cmd *cmd;
+
+	if (pkt->hdr.cmd != CALIBRATION_RES_NOTIFICATION) {
+		WARN_ON(pkt->hdr.cmd != CALIBRATION_COMPLETE_NOTIFICATION);
+		return true;
+	}
+
+	cmd = (struct iwl_calib_cmd *)pkt->data;
+
+	if (iwl_calib_set(priv, cmd, iwl_rx_packet_payload_len(pkt)))
+		IWL_ERR(priv, "Failed to record calibration data %d\n",
+			cmd->hdr.op_code);
+
+	return false;
+}
+
+int iwl_run_init_ucode(struct iwl_priv *priv)
+{
+	struct iwl_notification_wait calib_wait;
+	static const u16 calib_complete[] = {
+		CALIBRATION_RES_NOTIFICATION,
+		CALIBRATION_COMPLETE_NOTIFICATION
+	};
+	int ret;
+
+	lockdep_assert_held(&priv->mutex);
+
+	/* No init ucode required? Curious, but maybe ok */
+	if (!priv->fw->img[IWL_UCODE_INIT].num_sec)
+		return 0;
+
+	iwl_init_notification_wait(&priv->notif_wait, &calib_wait,
+				   calib_complete, ARRAY_SIZE(calib_complete),
+				   iwlagn_wait_calib, priv);
+
+	/* Will also start the device */
+	ret = iwl_load_ucode_wait_alive(priv, IWL_UCODE_INIT);
+	if (ret)
+		goto error;
+
+	ret = iwl_init_alive_start(priv);
+	if (ret)
+		goto error;
+
+	/*
+	 * Some things may run in the background now, but we
+	 * just wait for the calibration complete notification.
+	 */
+	ret = iwl_wait_notification(&priv->notif_wait, &calib_wait,
+					UCODE_CALIB_TIMEOUT);
+
+	goto out;
+
+ error:
+	iwl_remove_notification(&priv->notif_wait, &calib_wait);
+ out:
+	/* Whatever happened, stop the device */
+	iwl_trans_stop_device(priv->trans);
+	priv->ucode_loaded = false;
+
+	return ret;
+}