Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 528 insertions, 0 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/dbg-tlv.h b/drivers/net/wireless/intel/iwlwifi/fw/api/dbg-tlv.h
new file mode 100644
index 000000000..ba538d709
--- /dev/null
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api/dbg-tlv.h
@@ -0,0 +1,528 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
+/*
+ * Copyright (C) 2018-2022 Intel Corporation
+ */
+#ifndef __iwl_fw_dbg_tlv_h__
+#define __iwl_fw_dbg_tlv_h__
+
+#include <linux/bitops.h>
+
+#define IWL_FW_INI_MAX_REGION_ID		64
+#define IWL_FW_INI_MAX_NAME			32
+#define IWL_FW_INI_MAX_CFG_NAME			64
+#define IWL_FW_INI_DOMAIN_ALWAYS_ON		0
+#define IWL_FW_INI_REGION_ID_MASK		GENMASK(15, 0)
+#define IWL_FW_INI_REGION_DUMP_POLICY_MASK	GENMASK(31, 16)
+
+/**
+ * struct iwl_fw_ini_hcmd
+ *
+ * @id: the debug configuration command type for instance: 0xf6 / 0xf5 / DHC
+ * @group: the desired cmd group
+ * @reserved: to align to FW struct
+ * @data: all of the relevant command data to be sent
+ */
+struct iwl_fw_ini_hcmd {
+	u8 id;
+	u8 group;
+	__le16 reserved;
+	u8 data[];
+} __packed; /* FW_DEBUG_TLV_HCMD_DATA_API_S_VER_1 */
+
+/**
+ * struct iwl_fw_ini_header - Common Header for all ini debug TLV's structures
+ *
+ * @version: TLV version
+ * @domain: domain of the TLV. One of &enum iwl_fw_ini_dbg_domain
+ */
+struct iwl_fw_ini_header {
+	__le32 version;
+	__le32 domain;
+	/* followed by the data */
+} __packed; /* FW_TLV_DEBUG_HEADER_S_VER_1 */
+
+/**
+ * struct iwl_fw_ini_region_dev_addr - Configuration to read device addresses
+ *
+ * @size: size of each memory chunk
+ * @offset: offset to add to the base address of each chunk
+ */
+struct iwl_fw_ini_region_dev_addr {
+	__le32 size;
+	__le32 offset;
+} __packed; /* FW_TLV_DEBUG_DEVICE_ADDR_API_S_VER_1 */
+
+/**
+ * struct iwl_fw_ini_region_fifos - Configuration to read Tx/Rx fifos
+ *
+ * @fid: fifos ids array. Used to determine what fifos to collect
+ * @hdr_only: if non zero, collect only the registers
+ * @offset: offset to add to the registers addresses
+ */
+struct iwl_fw_ini_region_fifos {
+	__le32 fid[2];
+	__le32 hdr_only;
+	__le32 offset;
+} __packed; /* FW_TLV_DEBUG_REGION_FIFOS_API_S_VER_1 */
+
+/**
+ * struct iwl_fw_ini_region_err_table - error table region data
+ *
+ * Configuration to read Umac/Lmac error table
+ *
+ * @version: version of the error table
+ * @base_addr: base address of the error table
+ * @size: size of the error table
+ * @offset: offset to add to &base_addr
+ */
+struct iwl_fw_ini_region_err_table {
+	__le32 version;
+	__le32 base_addr;
+	__le32 size;
+	__le32 offset;
+} __packed; /* FW_TLV_DEBUG_REGION_ERROR_TABLE_API_S_VER_1 */
+
+/**
+ * struct iwl_fw_ini_region_special_device_memory - special device memory
+ *
+ * Configuration to read a special memory
+ *
+ * @type: type of the special memory
+ * @version: version of the special memory
+ * @base_addr: base address of the error table
+ * @size: size of the error table
+ * @offset: offset to add to &base_addr
+ */
+struct iwl_fw_ini_region_special_device_memory {
+	__le16 type;
+	__le16 version;
+	__le32 base_addr;
+	__le32 size;
+	__le32 offset;
+} __packed; /* FW_TLV_DEBUG_REGION_SPECIAL_DEVICE_ADDR_API_S_VER_1 */
+
+/**
+ * struct iwl_fw_ini_region_internal_buffer - internal buffer region data
+ *
+ * Configuration to read internal monitor buffer
+ *
+ * @alloc_id: allocation id one of &enum iwl_fw_ini_allocation_id
+ * @base_addr: internal buffer base address
+ * @size: size internal buffer size
+ */
+struct iwl_fw_ini_region_internal_buffer {
+	__le32 alloc_id;
+	__le32 base_addr;
+	__le32 size;
+} __packed; /* FW_TLV_DEBUG_REGION_INTERNAL_BUFFER_API_S_VER_1 */
+
+/**
+ * struct iwl_fw_ini_region_tlv - region TLV
+ *
+ * Configures parameters for region data collection
+ *
+ * @hdr: debug header
+ * @id: region id. Max id is &IWL_FW_INI_MAX_REGION_ID
+ * @type: region type. One of &enum iwl_fw_ini_region_type
+ * @sub_type: region sub type
+ * @sub_type_ver: region sub type version
+ * @reserved: not in use
+ * @name: region name
+ * @dev_addr: device address configuration. Used by
+ *	&IWL_FW_INI_REGION_DEVICE_MEMORY, &IWL_FW_INI_REGION_PERIPHERY_MAC,
+ *	&IWL_FW_INI_REGION_PERIPHERY_PHY, &IWL_FW_INI_REGION_PERIPHERY_AUX,
+ *	&IWL_FW_INI_REGION_PAGING, &IWL_FW_INI_REGION_CSR,
+ *	&IWL_FW_INI_REGION_DRAM_IMR and &IWL_FW_INI_REGION_PCI_IOSF_CONFIG
+ *	&IWL_FW_INI_REGION_DBGI_SRAM, &FW_TLV_DEBUG_REGION_TYPE_DBGI_SRAM,
+ * @fifos: fifos configuration. Used by &IWL_FW_INI_REGION_TXF and
+ *	&IWL_FW_INI_REGION_RXF
+ * @err_table: error table configuration. Used by
+ *	IWL_FW_INI_REGION_LMAC_ERROR_TABLE and
+ *	IWL_FW_INI_REGION_UMAC_ERROR_TABLE
+ * @internal_buffer: internal monitor buffer configuration. Used by
+ *	&IWL_FW_INI_REGION_INTERNAL_BUFFER
+ * @dram_alloc_id: dram allocation id. One of &enum iwl_fw_ini_allocation_id.
+ *	Used by &IWL_FW_INI_REGION_DRAM_BUFFER
+ * @tlv_mask: tlv collection mask. Used by &IWL_FW_INI_REGION_TLV
+ * @addrs: array of addresses attached to the end of the region tlv
+ */
+struct iwl_fw_ini_region_tlv {
+	struct iwl_fw_ini_header hdr;
+	__le32 id;
+	u8 type;
+	u8 sub_type;
+	u8 sub_type_ver;
+	u8 reserved;
+	u8 name[IWL_FW_INI_MAX_NAME];
+	union {
+		struct iwl_fw_ini_region_dev_addr dev_addr;
+		struct iwl_fw_ini_region_fifos fifos;
+		struct iwl_fw_ini_region_err_table err_table;
+		struct iwl_fw_ini_region_internal_buffer internal_buffer;
+		struct iwl_fw_ini_region_special_device_memory special_mem;
+		__le32 dram_alloc_id;
+		__le32 tlv_mask;
+	}; /* FW_TLV_DEBUG_REGION_CONF_PARAMS_API_U_VER_1 */
+	__le32 addrs[];
+} __packed; /* FW_TLV_DEBUG_REGION_API_S_VER_1 */
+
+/**
+ * struct iwl_fw_ini_debug_info_tlv
+ *
+ * debug configuration name for a specific image
+ *
+ * @hdr: debug header
+ * @image_type: image type
+ * @debug_cfg_name: debug configuration name
+ */
+struct iwl_fw_ini_debug_info_tlv {
+	struct iwl_fw_ini_header hdr;
+	__le32 image_type;
+	u8 debug_cfg_name[IWL_FW_INI_MAX_CFG_NAME];
+} __packed; /* FW_TLV_DEBUG_INFO_API_S_VER_1 */
+
+/**
+ * struct iwl_fw_ini_allocation_tlv - Allocates DRAM buffers
+ *
+ * @hdr: debug header
+ * @alloc_id: allocation id. One of &enum iwl_fw_ini_allocation_id
+ * @buf_location: buffer location. One of &enum iwl_fw_ini_buffer_location
+ * @req_size: requested buffer size
+ * @max_frags_num: maximum number of fragments
+ * @min_size: minimum buffer size
+ */
+struct iwl_fw_ini_allocation_tlv {
+	struct iwl_fw_ini_header hdr;
+	__le32 alloc_id;
+	__le32 buf_location;
+	__le32 req_size;
+	__le32 max_frags_num;
+	__le32 min_size;
+} __packed; /* FW_TLV_DEBUG_BUFFER_ALLOCATION_API_S_VER_1 */
+
+/**
+ * struct iwl_fw_ini_trigger_tlv - trigger TLV
+ *
+ * Trigger that upon firing, determines what regions to collect
+ *
+ * @hdr: debug header
+ * @time_point: time point. One of &enum iwl_fw_ini_time_point
+ * @trigger_reason: trigger reason
+ * @apply_policy: uses &enum iwl_fw_ini_trigger_apply_policy
+ * @dump_delay: delay from trigger fire to dump, in usec
+ * @occurrences: max trigger fire occurrences allowed
+ * @reserved: unused
+ * @ignore_consec: ignore consecutive triggers, in usec
+ * @reset_fw: if non zero, will reset and reload the FW
+ * @multi_dut: initiate debug dump data on several DUTs
+ * @regions_mask: mask of regions to collect
+ * @data: trigger data
+ */
+struct iwl_fw_ini_trigger_tlv {
+	struct iwl_fw_ini_header hdr;
+	__le32 time_point;
+	__le32 trigger_reason;
+	__le32 apply_policy;
+	__le32 dump_delay;
+	__le32 occurrences;
+	__le32 reserved;
+	__le32 ignore_consec;
+	__le32 reset_fw;
+	__le32 multi_dut;
+	__le64 regions_mask;
+	__le32 data[];
+} __packed; /* FW_TLV_DEBUG_TRIGGER_API_S_VER_1 */
+
+/**
+ * struct iwl_fw_ini_hcmd_tlv - Generic Host command pass through TLV
+ *
+ * @hdr: debug header
+ * @time_point: time point. One of &enum iwl_fw_ini_time_point
+ * @period_msec: interval at which the hcmd will be sent to the FW.
+ *	Measured in msec (0 = one time command)
+ * @hcmd: a variable length host-command to be sent to apply the configuration
+ */
+struct iwl_fw_ini_hcmd_tlv {
+	struct iwl_fw_ini_header hdr;
+	__le32 time_point;
+	__le32 period_msec;
+	struct iwl_fw_ini_hcmd hcmd;
+} __packed; /* FW_TLV_DEBUG_HCMD_API_S_VER_1 */
+
+/**
+* struct iwl_fw_ini_addr_val - Address and value to set it to
+*
+* @address: the base address
+* @value: value to set at address
+*/
+struct iwl_fw_ini_addr_val {
+	__le32 address;
+	__le32 value;
+} __packed; /* FW_TLV_DEBUG_ADDR_VALUE_VER_1 */
+
+/**
+ * struct iwl_fw_ini_conf_tlv - configuration TLV to set register/memory.
+ *
+ * @hdr: debug header
+ * @time_point: time point to apply config. One of &enum iwl_fw_ini_time_point
+ * @set_type: write access type preset token for time point.
+ *  one of &enum iwl_fw_ini_config_set_type
+ * @addr_offset: the offset to add to any item in address[0] field
+ * @addr_val: address value pair
+ */
+struct iwl_fw_ini_conf_set_tlv {
+	struct iwl_fw_ini_header hdr;
+	__le32 time_point;
+	__le32 set_type;
+	__le32 addr_offset;
+	struct iwl_fw_ini_addr_val addr_val[];
+} __packed; /* FW_TLV_DEBUG_CONFIG_SET_API_S_VER_1 */
+
+/**
+ * enum iwl_fw_ini_config_set_type
+ *
+ * @IWL_FW_INI_CONFIG_SET_TYPE_INVALID: invalid config set
+ * @IWL_FW_INI_CONFIG_SET_TYPE_DEVICE_PERIPHERY_MAC: for PERIPHERY MAC configuration
+ * @IWL_FW_INI_CONFIG_SET_TYPE_DEVICE_PERIPHERY_PHY: for PERIPHERY PHY configuration
+ * @IWL_FW_INI_CONFIG_SET_TYPE_DEVICE_PERIPHERY_AUX: for PERIPHERY AUX configuration
+ * @IWL_FW_INI_CONFIG_SET_TYPE_DEVICE_MEMORY: for DEVICE MEMORY configuration
+ * @IWL_FW_INI_CONFIG_SET_TYPE_CSR: for CSR configuration
+ * @IWL_FW_INI_CONFIG_SET_TYPE_DBGC_DRAM_ADDR: for DBGC_DRAM_ADDR configuration
+ * @IWL_FW_INI_CONFIG_SET_TYPE_PERIPH_SCRATCH_HWM: for PERIPH SCRATCH HWM configuration
+ * @IWL_FW_INI_ALLOCATION_NUM: max number of configuration supported
+*/
+
+enum iwl_fw_ini_config_set_type {
+	IWL_FW_INI_CONFIG_SET_TYPE_INVALID = 0,
+	IWL_FW_INI_CONFIG_SET_TYPE_DEVICE_PERIPHERY_MAC,
+	IWL_FW_INI_CONFIG_SET_TYPE_DEVICE_PERIPHERY_PHY,
+	IWL_FW_INI_CONFIG_SET_TYPE_DEVICE_PERIPHERY_AUX,
+	IWL_FW_INI_CONFIG_SET_TYPE_DEVICE_MEMORY,
+	IWL_FW_INI_CONFIG_SET_TYPE_CSR,
+	IWL_FW_INI_CONFIG_SET_TYPE_DBGC_DRAM_ADDR,
+	IWL_FW_INI_CONFIG_SET_TYPE_PERIPH_SCRATCH_HWM,
+	IWL_FW_INI_CONFIG_SET_TYPE_MAX_NUM,
+} __packed;
+
+/**
+ * enum iwl_fw_ini_allocation_id
+ *
+ * @IWL_FW_INI_ALLOCATION_INVALID: invalid
+ * @IWL_FW_INI_ALLOCATION_ID_DBGC1: allocation meant for DBGC1 configuration
+ * @IWL_FW_INI_ALLOCATION_ID_DBGC2: allocation meant for DBGC2 configuration
+ * @IWL_FW_INI_ALLOCATION_ID_DBGC3: allocation meant for DBGC3 configuration
+ * @IWL_FW_INI_ALLOCATION_ID_DBGC4: allocation meant for DBGC4 configuration
+ * @IWL_FW_INI_ALLOCATION_NUM: number of allocation ids
+*/
+enum iwl_fw_ini_allocation_id {
+	IWL_FW_INI_ALLOCATION_INVALID,
+	IWL_FW_INI_ALLOCATION_ID_DBGC1,
+	IWL_FW_INI_ALLOCATION_ID_DBGC2,
+	IWL_FW_INI_ALLOCATION_ID_DBGC3,
+	IWL_FW_INI_ALLOCATION_ID_DBGC4,
+	IWL_FW_INI_ALLOCATION_NUM,
+}; /* FW_DEBUG_TLV_ALLOCATION_ID_E_VER_1 */
+
+/**
+ * enum iwl_fw_ini_buffer_location
+ *
+ * @IWL_FW_INI_LOCATION_INVALID: invalid
+ * @IWL_FW_INI_LOCATION_SRAM_PATH: SRAM location
+ * @IWL_FW_INI_LOCATION_DRAM_PATH: DRAM location
+ * @IWL_FW_INI_LOCATION_NPK_PATH: NPK location
+ */
+enum iwl_fw_ini_buffer_location {
+	IWL_FW_INI_LOCATION_INVALID,
+	IWL_FW_INI_LOCATION_SRAM_PATH,
+	IWL_FW_INI_LOCATION_DRAM_PATH,
+	IWL_FW_INI_LOCATION_NPK_PATH,
+	IWL_FW_INI_LOCATION_NUM,
+}; /* FW_DEBUG_TLV_BUFFER_LOCATION_E_VER_1 */
+
+/**
+ * enum iwl_fw_ini_region_type
+ *
+ * @IWL_FW_INI_REGION_INVALID: invalid
+ * @IWL_FW_INI_REGION_TLV: uCode and debug TLVs
+ * @IWL_FW_INI_REGION_INTERNAL_BUFFER: monitor SMEM buffer
+ * @IWL_FW_INI_REGION_DRAM_BUFFER: monitor DRAM buffer
+ * @IWL_FW_INI_REGION_TXF: TX fifos
+ * @IWL_FW_INI_REGION_RXF: RX fifo
+ * @IWL_FW_INI_REGION_LMAC_ERROR_TABLE: lmac error table
+ * @IWL_FW_INI_REGION_UMAC_ERROR_TABLE: umac error table
+ * @IWL_FW_INI_REGION_RSP_OR_NOTIF: FW response or notification data
+ * @IWL_FW_INI_REGION_DEVICE_MEMORY: device internal memory
+ * @IWL_FW_INI_REGION_PERIPHERY_MAC: periphery registers of MAC
+ * @IWL_FW_INI_REGION_PERIPHERY_PHY: periphery registers of PHY
+ * @IWL_FW_INI_REGION_PERIPHERY_AUX: periphery registers of AUX
+ * @IWL_FW_INI_REGION_PAGING: paging memory
+ * @IWL_FW_INI_REGION_CSR: CSR registers
+ * @IWL_FW_INI_REGION_DRAM_IMR: IMR memory
+ * @IWL_FW_INI_REGION_PCI_IOSF_CONFIG: PCI/IOSF config
+ * @IWL_FW_INI_REGION_SPECIAL_DEVICE_MEMORY: special device memory
+ * @IWL_FW_INI_REGION_DBGI_SRAM: periphery registers of DBGI SRAM
+ * @IWL_FW_INI_REGION_NUM: number of region types
+ */
+enum iwl_fw_ini_region_type {
+	IWL_FW_INI_REGION_INVALID,
+	IWL_FW_INI_REGION_TLV,
+	IWL_FW_INI_REGION_INTERNAL_BUFFER,
+	IWL_FW_INI_REGION_DRAM_BUFFER,
+	IWL_FW_INI_REGION_TXF,
+	IWL_FW_INI_REGION_RXF,
+	IWL_FW_INI_REGION_LMAC_ERROR_TABLE,
+	IWL_FW_INI_REGION_UMAC_ERROR_TABLE,
+	IWL_FW_INI_REGION_RSP_OR_NOTIF,
+	IWL_FW_INI_REGION_DEVICE_MEMORY,
+	IWL_FW_INI_REGION_PERIPHERY_MAC,
+	IWL_FW_INI_REGION_PERIPHERY_PHY,
+	IWL_FW_INI_REGION_PERIPHERY_AUX,
+	IWL_FW_INI_REGION_PAGING,
+	IWL_FW_INI_REGION_CSR,
+	IWL_FW_INI_REGION_DRAM_IMR,
+	IWL_FW_INI_REGION_PCI_IOSF_CONFIG,
+	IWL_FW_INI_REGION_SPECIAL_DEVICE_MEMORY,
+	IWL_FW_INI_REGION_DBGI_SRAM,
+	IWL_FW_INI_REGION_NUM
+}; /* FW_TLV_DEBUG_REGION_TYPE_API_E */
+
+enum iwl_fw_ini_region_device_memory_subtype {
+	IWL_FW_INI_REGION_DEVICE_MEMORY_SUBTYPE_HW_SMEM = 1,
+	IWL_FW_INI_REGION_DEVICE_MEMORY_SUBTYPE_UMAC_ERROR_TABLE = 5,
+	IWL_FW_INI_REGION_DEVICE_MEMORY_SUBTYPE_LMAC_1_ERROR_TABLE = 7,
+	IWL_FW_INI_REGION_DEVICE_MEMORY_SUBTYPE_LMAC_2_ERROR_TABLE = 10,
+	IWL_FW_INI_REGION_DEVICE_MEMORY_SUBTYPE_TCM_1_ERROR_TABLE = 14,
+	IWL_FW_INI_REGION_DEVICE_MEMORY_SUBTYPE_TCM_2_ERROR_TABLE = 16,
+	IWL_FW_INI_REGION_DEVICE_MEMORY_SUBTYPE_RCM_1_ERROR_TABLE = 18,
+	IWL_FW_INI_REGION_DEVICE_MEMORY_SUBTYPE_RCM_2_ERROR_TABLE = 20,
+}; /* FW_TLV_DEBUG_REGION_DEVICE_MEMORY_SUBTYPE_API_E */
+
+/**
+ * enum iwl_fw_ini_time_point
+ *
+ * Hard coded time points in which the driver can send hcmd or perform dump
+ * collection
+ *
+ * @IWL_FW_INI_TIME_POINT_EARLY: pre loading the FW
+ * @IWL_FW_INI_TIME_POINT_AFTER_ALIVE: first cmd from host after alive notif
+ * @IWL_FW_INI_TIME_POINT_POST_INIT: last cmd in series of init sequence
+ * @IWL_FW_INI_TIME_POINT_FW_ASSERT: FW assert
+ * @IWL_FW_INI_TIME_POINT_FW_HW_ERROR: FW HW error
+ * @IWL_FW_INI_TIME_POINT_FW_TFD_Q_HANG: TFD queue hang
+ * @IWL_FW_INI_TIME_POINT_FW_DHC_NOTIFICATION: DHC cmd response and notif
+ * @IWL_FW_INI_TIME_POINT_FW_RSP_OR_NOTIF: FW response or notification.
+ *	data field holds id and group
+ * @IWL_FW_INI_TIME_POINT_USER_TRIGGER: user trigger time point
+ * @IWL_FW_INI_TIME_POINT_PERIODIC: periodic timepoint that fires in constant
+ *	intervals. data field holds the interval time in msec
+ * @IWL_FW_INI_TIME_POINT_RESERVED: reserved
+ * @IWL_FW_INI_TIME_POINT_HOST_ASSERT: Unused
+ * @IWL_FW_INI_TIME_POINT_HOST_ALIVE_TIMEOUT: alive timeout
+ * @IWL_FW_INI_TIME_POINT_HOST_DEVICE_ENABLE: device enable
+ * @IWL_FW_INI_TIME_POINT_HOST_DEVICE_DISABLE: device disable
+ * @IWL_FW_INI_TIME_POINT_HOST_D3_START: D3 start
+ * @IWL_FW_INI_TIME_POINT_HOST_D3_END: D3 end
+ * @IWL_FW_INI_TIME_POINT_MISSED_BEACONS: missed beacons
+ * @IWL_FW_INI_TIME_POINT_ASSOC_FAILED: association failure
+ * @IWL_FW_INI_TIME_POINT_TX_FAILED: Tx frame failed
+ * @IWL_FW_INI_TIME_POINT_TX_WFD_ACTION_FRAME_FAILED: wifi direct action
+ *	frame failed
+ * @IWL_FW_INI_TIME_POINT_TX_LATENCY_THRESHOLD: Tx latency threshold
+ * @IWL_FW_INI_TIME_POINT_HANG_OCCURRED: hang occurred
+ * @IWL_FW_INI_TIME_POINT_EAPOL_FAILED: EAPOL failed
+ * @IWL_FW_INI_TIME_POINT_FAKE_TX: fake Tx
+ * @IWL_FW_INI_TIME_POINT_DEASSOC: de association
+ * @IWL_FW_INI_TIME_POINT_NUM: number of time points
+ */
+enum iwl_fw_ini_time_point {
+	IWL_FW_INI_TIME_POINT_INVALID,
+	IWL_FW_INI_TIME_POINT_EARLY,
+	IWL_FW_INI_TIME_POINT_AFTER_ALIVE,
+	IWL_FW_INI_TIME_POINT_POST_INIT,
+	IWL_FW_INI_TIME_POINT_FW_ASSERT,
+	IWL_FW_INI_TIME_POINT_FW_HW_ERROR,
+	IWL_FW_INI_TIME_POINT_FW_TFD_Q_HANG,
+	IWL_FW_INI_TIME_POINT_FW_DHC_NOTIFICATION,
+	IWL_FW_INI_TIME_POINT_FW_RSP_OR_NOTIF,
+	IWL_FW_INI_TIME_POINT_USER_TRIGGER,
+	IWL_FW_INI_TIME_POINT_PERIODIC,
+	IWL_FW_INI_TIME_POINT_RESERVED,
+	IWL_FW_INI_TIME_POINT_HOST_ASSERT,
+	IWL_FW_INI_TIME_POINT_HOST_ALIVE_TIMEOUT,
+	IWL_FW_INI_TIME_POINT_HOST_DEVICE_ENABLE,
+	IWL_FW_INI_TIME_POINT_HOST_DEVICE_DISABLE,
+	IWL_FW_INI_TIME_POINT_HOST_D3_START,
+	IWL_FW_INI_TIME_POINT_HOST_D3_END,
+	IWL_FW_INI_TIME_POINT_MISSED_BEACONS,
+	IWL_FW_INI_TIME_POINT_ASSOC_FAILED,
+	IWL_FW_INI_TIME_POINT_TX_FAILED,
+	IWL_FW_INI_TIME_POINT_TX_WFD_ACTION_FRAME_FAILED,
+	IWL_FW_INI_TIME_POINT_TX_LATENCY_THRESHOLD,
+	IWL_FW_INI_TIME_POINT_HANG_OCCURRED,
+	IWL_FW_INI_TIME_POINT_EAPOL_FAILED,
+	IWL_FW_INI_TIME_POINT_FAKE_TX,
+	IWL_FW_INI_TIME_POINT_DEASSOC,
+	IWL_FW_INI_TIME_POINT_NUM,
+}; /* FW_TLV_DEBUG_TIME_POINT_API_E */
+
+/**
+ * enum iwl_fw_ini_trigger_apply_policy - Determines how to apply triggers
+ *
+ * @IWL_FW_INI_APPLY_POLICY_MATCH_TIME_POINT: match by time point
+ * @IWL_FW_INI_APPLY_POLICY_MATCH_DATA: match by trigger data
+ * @IWL_FW_INI_APPLY_POLICY_OVERRIDE_REGIONS: override regions mask.
+ *	Append otherwise
+ * @IWL_FW_INI_APPLY_POLICY_OVERRIDE_CFG: override trigger configuration
+ * @IWL_FW_INI_APPLY_POLICY_OVERRIDE_DATA: override trigger data.
+ *	Append otherwise
+ * @IWL_FW_INI_APPLY_POLICY_DUMP_COMPLETE_CMD: send cmd once dump collected
+ */
+enum iwl_fw_ini_trigger_apply_policy {
+	IWL_FW_INI_APPLY_POLICY_MATCH_TIME_POINT	= BIT(0),
+	IWL_FW_INI_APPLY_POLICY_MATCH_DATA		= BIT(1),
+	IWL_FW_INI_APPLY_POLICY_OVERRIDE_REGIONS	= BIT(8),
+	IWL_FW_INI_APPLY_POLICY_OVERRIDE_CFG		= BIT(9),
+	IWL_FW_INI_APPLY_POLICY_OVERRIDE_DATA		= BIT(10),
+	IWL_FW_INI_APPLY_POLICY_DUMP_COMPLETE_CMD	= BIT(16),
+};
+
+/**
+ * enum iwl_fw_ini_trigger_reset_fw_policy - Determines how to handle reset
+ *
+ * @IWL_FW_INI_RESET_FW_MODE_NOTHING: do not stop FW and reload (default)
+ * @IWL_FW_INI_RESET_FW_MODE_STOP_FW_ONLY: stop FW without reload FW
+ * @IWL_FW_INI_RESET_FW_MODE_STOP_AND_RELOAD_FW: stop FW with reload FW
+ */
+enum iwl_fw_ini_trigger_reset_fw_policy {
+	IWL_FW_INI_RESET_FW_MODE_NOTHING = 0,
+	IWL_FW_INI_RESET_FW_MODE_STOP_FW_ONLY,
+	IWL_FW_INI_RESET_FW_MODE_STOP_AND_RELOAD_FW
+};
+
+/**
+ * enum iwl_fw_ini_dump_policy - Determines how to handle dump based on enabled flags
+ *
+ * @IWL_FW_INI_DEBUG_DUMP_POLICY_NO_LIMIT: OS has no limit of dump size
+ * @IWL_FW_INI_DEBUG_DUMP_POLICY_MAX_LIMIT_600KB: mini dump only 600KB region dump
+ * @IWL_FW_IWL_DEBUG_DUMP_POLICY_MAX_LIMIT_5MB: mini dump 5MB size dump
+ */
+enum iwl_fw_ini_dump_policy {
+	IWL_FW_INI_DEBUG_DUMP_POLICY_NO_LIMIT           = BIT(0),
+	IWL_FW_INI_DEBUG_DUMP_POLICY_MAX_LIMIT_600KB    = BIT(1),
+	IWL_FW_IWL_DEBUG_DUMP_POLICY_MAX_LIMIT_5MB      = BIT(2),
+
+};
+
+/**
+ * enum iwl_fw_ini_dump_type - Determines dump type based on size defined by FW.
+ *
+ * @IWL_FW_INI_DUMP_BRIEF : only dump the most important regions
+ * @IWL_FW_INI_DEBUG_MEDIUM: dump more regions than "brief", but not all regions
+ * @IWL_FW_INI_DUMP_VERBOSE : dump all regions
+ */
+enum iwl_fw_ini_dump_type {
+	IWL_FW_INI_DUMP_BRIEF,
+	IWL_FW_INI_DUMP_MEDIUM,
+	IWL_FW_INI_DUMP_VERBOSE,
+};
+#endif