Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 768 insertions, 0 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/mac.h b/drivers/net/wireless/intel/iwlwifi/fw/api/mac.h
new file mode 100644
index 000000000..e3eda251c
--- /dev/null
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api/mac.h
@@ -0,0 +1,768 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
+/*
+ * Copyright (C) 2012-2014, 2018-2022 Intel Corporation
+ * Copyright (C) 2017 Intel Deutschland GmbH
+ */
+#ifndef __iwl_fw_api_mac_h__
+#define __iwl_fw_api_mac_h__
+
+/*
+ * The first MAC indices (starting from 0) are available to the driver,
+ * AUX indices follows - 1 for non-CDB, 2 for CDB.
+ */
+#define MAC_INDEX_AUX		4
+#define MAC_INDEX_MIN_DRIVER	0
+#define NUM_MAC_INDEX_DRIVER	MAC_INDEX_AUX
+#define NUM_MAC_INDEX		(NUM_MAC_INDEX_DRIVER + 1)
+#define NUM_MAC_INDEX_CDB	(NUM_MAC_INDEX_DRIVER + 2)
+
+#define IWL_MVM_STATION_COUNT_MAX	16
+#define IWL_MVM_INVALID_STA		0xFF
+
+enum iwl_ac {
+	AC_BK,
+	AC_BE,
+	AC_VI,
+	AC_VO,
+	AC_NUM,
+};
+
+/**
+ * enum iwl_mac_protection_flags - MAC context flags
+ * @MAC_PROT_FLG_TGG_PROTECT: 11g protection when transmitting OFDM frames,
+ *	this will require CCK RTS/CTS2self.
+ *	RTS/CTS will protect full burst time.
+ * @MAC_PROT_FLG_HT_PROT: enable HT protection
+ * @MAC_PROT_FLG_FAT_PROT: protect 40 MHz transmissions
+ * @MAC_PROT_FLG_SELF_CTS_EN: allow CTS2self
+ */
+enum iwl_mac_protection_flags {
+	MAC_PROT_FLG_TGG_PROTECT	= BIT(3),
+	MAC_PROT_FLG_HT_PROT		= BIT(23),
+	MAC_PROT_FLG_FAT_PROT		= BIT(24),
+	MAC_PROT_FLG_SELF_CTS_EN	= BIT(30),
+};
+
+#define MAC_FLG_SHORT_SLOT		BIT(4)
+#define MAC_FLG_SHORT_PREAMBLE		BIT(5)
+
+/**
+ * enum iwl_mac_types - Supported MAC types
+ * @FW_MAC_TYPE_FIRST: lowest supported MAC type
+ * @FW_MAC_TYPE_AUX: Auxiliary MAC (internal)
+ * @FW_MAC_TYPE_LISTENER: monitor MAC type (?)
+ * @FW_MAC_TYPE_PIBSS: Pseudo-IBSS
+ * @FW_MAC_TYPE_IBSS: IBSS
+ * @FW_MAC_TYPE_BSS_STA: BSS (managed) station
+ * @FW_MAC_TYPE_P2P_DEVICE: P2P Device
+ * @FW_MAC_TYPE_P2P_STA: P2P client
+ * @FW_MAC_TYPE_GO: P2P GO
+ * @FW_MAC_TYPE_TEST: ?
+ * @FW_MAC_TYPE_MAX: highest support MAC type
+ */
+enum iwl_mac_types {
+	FW_MAC_TYPE_FIRST = 1,
+	FW_MAC_TYPE_AUX = FW_MAC_TYPE_FIRST,
+	FW_MAC_TYPE_LISTENER,
+	FW_MAC_TYPE_PIBSS,
+	FW_MAC_TYPE_IBSS,
+	FW_MAC_TYPE_BSS_STA,
+	FW_MAC_TYPE_P2P_DEVICE,
+	FW_MAC_TYPE_P2P_STA,
+	FW_MAC_TYPE_GO,
+	FW_MAC_TYPE_TEST,
+	FW_MAC_TYPE_MAX = FW_MAC_TYPE_TEST
+}; /* MAC_CONTEXT_TYPE_API_E_VER_1 */
+
+/**
+ * enum iwl_tsf_id - TSF hw timer ID
+ * @TSF_ID_A: use TSF A
+ * @TSF_ID_B: use TSF B
+ * @TSF_ID_C: use TSF C
+ * @TSF_ID_D: use TSF D
+ * @NUM_TSF_IDS: number of TSF timers available
+ */
+enum iwl_tsf_id {
+	TSF_ID_A = 0,
+	TSF_ID_B = 1,
+	TSF_ID_C = 2,
+	TSF_ID_D = 3,
+	NUM_TSF_IDS = 4,
+}; /* TSF_ID_API_E_VER_1 */
+
+/**
+ * struct iwl_mac_data_ap - configuration data for AP MAC context
+ * @beacon_time: beacon transmit time in system time
+ * @beacon_tsf: beacon transmit time in TSF
+ * @bi: beacon interval in TU
+ * @reserved1: reserved
+ * @dtim_interval: dtim transmit time in TU
+ * @reserved2: reserved
+ * @mcast_qid: queue ID for multicast traffic.
+ *	NOTE: obsolete from VER2 and on
+ * @beacon_template: beacon template ID
+ */
+struct iwl_mac_data_ap {
+	__le32 beacon_time;
+	__le64 beacon_tsf;
+	__le32 bi;
+	__le32 reserved1;
+	__le32 dtim_interval;
+	__le32 reserved2;
+	__le32 mcast_qid;
+	__le32 beacon_template;
+} __packed; /* AP_MAC_DATA_API_S_VER_2 */
+
+/**
+ * struct iwl_mac_data_ibss - configuration data for IBSS MAC context
+ * @beacon_time: beacon transmit time in system time
+ * @beacon_tsf: beacon transmit time in TSF
+ * @bi: beacon interval in TU
+ * @reserved: reserved
+ * @beacon_template: beacon template ID
+ */
+struct iwl_mac_data_ibss {
+	__le32 beacon_time;
+	__le64 beacon_tsf;
+	__le32 bi;
+	__le32 reserved;
+	__le32 beacon_template;
+} __packed; /* IBSS_MAC_DATA_API_S_VER_1 */
+
+/**
+ * enum iwl_mac_data_policy - policy of the data path for this MAC
+ * @TWT_SUPPORTED: twt is supported
+ * @MORE_DATA_ACK_SUPPORTED: AP supports More Data Ack according to
+ *	paragraph 9.4.1.17 in P802.11ax_D4 specification. Used for TWT
+ *	early termination detection.
+ * @FLEXIBLE_TWT_SUPPORTED: AP supports flexible TWT schedule
+ * @PROTECTED_TWT_SUPPORTED: AP supports protected TWT frames (with 11w)
+ * @BROADCAST_TWT_SUPPORTED: AP and STA support broadcast TWT
+ * @COEX_HIGH_PRIORITY_ENABLE: high priority mode for BT coex, to be used
+ *	during 802.1X negotiation (and allowed during 4-way-HS)
+ */
+enum iwl_mac_data_policy {
+	TWT_SUPPORTED = BIT(0),
+	MORE_DATA_ACK_SUPPORTED = BIT(1),
+	FLEXIBLE_TWT_SUPPORTED = BIT(2),
+	PROTECTED_TWT_SUPPORTED = BIT(3),
+	BROADCAST_TWT_SUPPORTED = BIT(4),
+	COEX_HIGH_PRIORITY_ENABLE = BIT(5),
+};
+
+/**
+ * struct iwl_mac_data_sta - configuration data for station MAC context
+ * @is_assoc: 1 for associated state, 0 otherwise
+ * @dtim_time: DTIM arrival time in system time
+ * @dtim_tsf: DTIM arrival time in TSF
+ * @bi: beacon interval in TU, applicable only when associated
+ * @reserved1: reserved
+ * @dtim_interval: DTIM interval in TU, applicable only when associated
+ * @data_policy: see &enum iwl_mac_data_policy
+ * @listen_interval: in beacon intervals, applicable only when associated
+ * @assoc_id: unique ID assigned by the AP during association
+ * @assoc_beacon_arrive_time: TSF of first beacon after association
+ */
+struct iwl_mac_data_sta {
+	__le32 is_assoc;
+	__le32 dtim_time;
+	__le64 dtim_tsf;
+	__le32 bi;
+	__le32 reserved1;
+	__le32 dtim_interval;
+	__le32 data_policy;
+	__le32 listen_interval;
+	__le32 assoc_id;
+	__le32 assoc_beacon_arrive_time;
+} __packed; /* STA_MAC_DATA_API_S_VER_2 */
+
+/**
+ * struct iwl_mac_data_go - configuration data for P2P GO MAC context
+ * @ap: iwl_mac_data_ap struct with most config data
+ * @ctwin: client traffic window in TU (period after TBTT when GO is present).
+ *	0 indicates that there is no CT window.
+ * @opp_ps_enabled: indicate that opportunistic PS allowed
+ */
+struct iwl_mac_data_go {
+	struct iwl_mac_data_ap ap;
+	__le32 ctwin;
+	__le32 opp_ps_enabled;
+} __packed; /* GO_MAC_DATA_API_S_VER_1 */
+
+/**
+ * struct iwl_mac_data_p2p_sta - configuration data for P2P client MAC context
+ * @sta: iwl_mac_data_sta struct with most config data
+ * @ctwin: client traffic window in TU (period after TBTT when GO is present).
+ *	0 indicates that there is no CT window.
+ */
+struct iwl_mac_data_p2p_sta {
+	struct iwl_mac_data_sta sta;
+	__le32 ctwin;
+} __packed; /* P2P_STA_MAC_DATA_API_S_VER_2 */
+
+/**
+ * struct iwl_mac_data_pibss - Pseudo IBSS config data
+ * @stats_interval: interval in TU between statistics notifications to host.
+ */
+struct iwl_mac_data_pibss {
+	__le32 stats_interval;
+} __packed; /* PIBSS_MAC_DATA_API_S_VER_1 */
+
+/*
+ * struct iwl_mac_data_p2p_dev - configuration data for the P2P Device MAC
+ * context.
+ * @is_disc_extended: if set to true, P2P Device discoverability is enabled on
+ *	other channels as well. This should be to true only in case that the
+ *	device is discoverable and there is an active GO. Note that setting this
+ *	field when not needed, will increase the number of interrupts and have
+ *	effect on the platform power, as this setting opens the Rx filters on
+ *	all macs.
+ */
+struct iwl_mac_data_p2p_dev {
+	__le32 is_disc_extended;
+} __packed; /* _P2P_DEV_MAC_DATA_API_S_VER_1 */
+
+/**
+ * enum iwl_mac_filter_flags - MAC context filter flags
+ * @MAC_FILTER_IN_PROMISC: accept all data frames
+ * @MAC_FILTER_IN_CONTROL_AND_MGMT: pass all management and
+ *	control frames to the host
+ * @MAC_FILTER_ACCEPT_GRP: accept multicast frames
+ * @MAC_FILTER_DIS_DECRYPT: don't decrypt unicast frames
+ * @MAC_FILTER_DIS_GRP_DECRYPT: don't decrypt multicast frames
+ * @MAC_FILTER_IN_BEACON: transfer foreign BSS's beacons to host
+ *	(in station mode when associated)
+ * @MAC_FILTER_OUT_BCAST: filter out all broadcast frames
+ * @MAC_FILTER_IN_CRC32: extract FCS and append it to frames
+ * @MAC_FILTER_IN_PROBE_REQUEST: pass probe requests to host
+ */
+enum iwl_mac_filter_flags {
+	MAC_FILTER_IN_PROMISC		= BIT(0),
+	MAC_FILTER_IN_CONTROL_AND_MGMT	= BIT(1),
+	MAC_FILTER_ACCEPT_GRP		= BIT(2),
+	MAC_FILTER_DIS_DECRYPT		= BIT(3),
+	MAC_FILTER_DIS_GRP_DECRYPT	= BIT(4),
+	MAC_FILTER_IN_BEACON		= BIT(6),
+	MAC_FILTER_OUT_BCAST		= BIT(8),
+	MAC_FILTER_IN_CRC32		= BIT(11),
+	MAC_FILTER_IN_PROBE_REQUEST	= BIT(12),
+	/**
+	 * @MAC_FILTER_IN_11AX: mark BSS as supporting 802.11ax
+	 */
+	MAC_FILTER_IN_11AX		= BIT(14),
+};
+
+/**
+ * enum iwl_mac_qos_flags - QoS flags
+ * @MAC_QOS_FLG_UPDATE_EDCA: ?
+ * @MAC_QOS_FLG_TGN: HT is enabled
+ * @MAC_QOS_FLG_TXOP_TYPE: ?
+ *
+ */
+enum iwl_mac_qos_flags {
+	MAC_QOS_FLG_UPDATE_EDCA	= BIT(0),
+	MAC_QOS_FLG_TGN		= BIT(1),
+	MAC_QOS_FLG_TXOP_TYPE	= BIT(4),
+};
+
+/**
+ * struct iwl_ac_qos - QOS timing params for MAC_CONTEXT_CMD
+ * @cw_min: Contention window, start value in numbers of slots.
+ *	Should be a power-of-2, minus 1.  Device's default is 0x0f.
+ * @cw_max: Contention window, max value in numbers of slots.
+ *	Should be a power-of-2, minus 1.  Device's default is 0x3f.
+ * @aifsn:  Number of slots in Arbitration Interframe Space (before
+ *	performing random backoff timing prior to Tx).  Device default 1.
+ * @fifos_mask: FIFOs used by this MAC for this AC
+ * @edca_txop:  Length of Tx opportunity, in uSecs.  Device default is 0.
+ *
+ * One instance of this config struct for each of 4 EDCA access categories
+ * in struct iwl_qosparam_cmd.
+ *
+ * Device will automatically increase contention window by (2*CW) + 1 for each
+ * transmission retry.  Device uses cw_max as a bit mask, ANDed with new CW
+ * value, to cap the CW value.
+ */
+struct iwl_ac_qos {
+	__le16 cw_min;
+	__le16 cw_max;
+	u8 aifsn;
+	u8 fifos_mask;
+	__le16 edca_txop;
+} __packed; /* AC_QOS_API_S_VER_2 */
+
+/**
+ * struct iwl_mac_ctx_cmd - command structure to configure MAC contexts
+ * ( MAC_CONTEXT_CMD = 0x28 )
+ * @id_and_color: ID and color of the MAC
+ * @action: action to perform, one of FW_CTXT_ACTION_*
+ * @mac_type: one of &enum iwl_mac_types
+ * @tsf_id: TSF HW timer, one of &enum iwl_tsf_id
+ * @node_addr: MAC address
+ * @reserved_for_node_addr: reserved
+ * @bssid_addr: BSSID
+ * @reserved_for_bssid_addr: reserved
+ * @cck_rates: basic rates available for CCK
+ * @ofdm_rates: basic rates available for OFDM
+ * @protection_flags: combination of &enum iwl_mac_protection_flags
+ * @cck_short_preamble: 0x20 for enabling short preamble, 0 otherwise
+ * @short_slot: 0x10 for enabling short slots, 0 otherwise
+ * @filter_flags: combination of &enum iwl_mac_filter_flags
+ * @qos_flags: from &enum iwl_mac_qos_flags
+ * @ac: one iwl_mac_qos configuration for each AC
+ */
+struct iwl_mac_ctx_cmd {
+	/* COMMON_INDEX_HDR_API_S_VER_1 */
+	__le32 id_and_color;
+	__le32 action;
+	/* MAC_CONTEXT_COMMON_DATA_API_S_VER_1 */
+	__le32 mac_type;
+	__le32 tsf_id;
+	u8 node_addr[6];
+	__le16 reserved_for_node_addr;
+	u8 bssid_addr[6];
+	__le16 reserved_for_bssid_addr;
+	__le32 cck_rates;
+	__le32 ofdm_rates;
+	__le32 protection_flags;
+	__le32 cck_short_preamble;
+	__le32 short_slot;
+	__le32 filter_flags;
+	/* MAC_QOS_PARAM_API_S_VER_1 */
+	__le32 qos_flags;
+	struct iwl_ac_qos ac[AC_NUM+1];
+	/* MAC_CONTEXT_COMMON_DATA_API_S */
+	union {
+		struct iwl_mac_data_ap ap;
+		struct iwl_mac_data_go go;
+		struct iwl_mac_data_sta sta;
+		struct iwl_mac_data_p2p_sta p2p_sta;
+		struct iwl_mac_data_p2p_dev p2p_dev;
+		struct iwl_mac_data_pibss pibss;
+		struct iwl_mac_data_ibss ibss;
+	};
+} __packed; /* MAC_CONTEXT_CMD_API_S_VER_1 */
+
+#define IWL_NONQOS_SEQ_GET	0x1
+#define IWL_NONQOS_SEQ_SET	0x2
+struct iwl_nonqos_seq_query_cmd {
+	__le32 get_set_flag;
+	__le32 mac_id_n_color;
+	__le16 value;
+	__le16 reserved;
+} __packed; /* NON_QOS_TX_COUNTER_GET_SET_API_S_VER_1 */
+
+/**
+ * struct iwl_missed_beacons_notif - information on missed beacons
+ * ( MISSED_BEACONS_NOTIFICATION = 0xa2 )
+ * @mac_id: interface ID
+ * @consec_missed_beacons_since_last_rx: number of consecutive missed
+ *	beacons since last RX.
+ * @consec_missed_beacons: number of consecutive missed beacons
+ * @num_expected_beacons: number of expected beacons
+ * @num_recvd_beacons: number of received beacons
+ */
+struct iwl_missed_beacons_notif {
+	__le32 mac_id;
+	__le32 consec_missed_beacons_since_last_rx;
+	__le32 consec_missed_beacons;
+	__le32 num_expected_beacons;
+	__le32 num_recvd_beacons;
+} __packed; /* MISSED_BEACON_NTFY_API_S_VER_3 */
+
+/**
+ * struct iwl_he_backoff_conf - used for backoff configuration
+ * Per each trigger-based AC, (set by MU EDCA Parameter set info-element)
+ * used for backoff configuration of TXF5..TXF8 trigger based.
+ * The MU-TIMER is reloaded w/ MU_TIME each time a frame from the AC is sent via
+ * trigger-based TX.
+ * @cwmin: CW min
+ * @cwmax: CW max
+ * @aifsn: AIFSN
+ *	AIFSN=0, means that no backoff from the specified TRIG-BASED AC is
+ *	allowed till the MU-TIMER is 0
+ * @mu_time: MU time in 8TU units
+ */
+struct iwl_he_backoff_conf {
+	__le16 cwmin;
+	__le16 cwmax;
+	__le16 aifsn;
+	__le16 mu_time;
+} __packed; /* AC_QOS_DOT11AX_API_S */
+
+/**
+ * enum iwl_he_pkt_ext_constellations - PPE constellation indices
+ * @IWL_HE_PKT_EXT_BPSK: BPSK
+ * @IWL_HE_PKT_EXT_QPSK:  QPSK
+ * @IWL_HE_PKT_EXT_16QAM: 16-QAM
+ * @IWL_HE_PKT_EXT_64QAM: 64-QAM
+ * @IWL_HE_PKT_EXT_256QAM: 256-QAM
+ * @IWL_HE_PKT_EXT_1024QAM: 1024-QAM
+ * @IWL_HE_PKT_EXT_4096QAM: 4096-QAM, for EHT only
+ * @IWL_HE_PKT_EXT_NONE: not defined
+ */
+enum iwl_he_pkt_ext_constellations {
+	IWL_HE_PKT_EXT_BPSK = 0,
+	IWL_HE_PKT_EXT_QPSK,
+	IWL_HE_PKT_EXT_16QAM,
+	IWL_HE_PKT_EXT_64QAM,
+	IWL_HE_PKT_EXT_256QAM,
+	IWL_HE_PKT_EXT_1024QAM,
+	IWL_HE_PKT_EXT_4096QAM,
+	IWL_HE_PKT_EXT_NONE,
+};
+
+#define MAX_HE_SUPP_NSS	2
+#define MAX_CHANNEL_BW_INDX_API_D_VER_2	4
+#define MAX_CHANNEL_BW_INDX_API_D_VER_3	5
+
+/**
+ * struct iwl_he_pkt_ext_v1 - QAM thresholds
+ * The required PPE is set via HE Capabilities IE, per Nss x BW x MCS
+ * The IE is organized in the following way:
+ * Support for Nss x BW (or RU) matrix:
+ *	(0=SISO, 1=MIMO2) x (0-20MHz, 1-40MHz, 2-80MHz, 3-160MHz)
+ * Each entry contains 2 QAM thresholds for 8us and 16us:
+ *	0=BPSK, 1=QPSK, 2=16QAM, 3=64QAM, 4=256QAM, 5=1024QAM, 6=RES, 7=NONE
+ * i.e. QAM_th1 < QAM_th2 such if TX uses QAM_tx:
+ *	QAM_tx < QAM_th1            --> PPE=0us
+ *	QAM_th1 <= QAM_tx < QAM_th2 --> PPE=8us
+ *	QAM_th2 <= QAM_tx           --> PPE=16us
+ * @pkt_ext_qam_th: QAM thresholds
+ *	For each Nss/Bw define 2 QAM thrsholds (0..5)
+ *	For rates below the low_th, no need for PPE
+ *	For rates between low_th and high_th, need 8us PPE
+ *	For rates equal or higher then the high_th, need 16us PPE
+ *	Nss (0-siso, 1-mimo2) x BW (0-20MHz, 1-40MHz, 2-80MHz, 3-160MHz) x
+ *		(0-low_th, 1-high_th)
+ */
+struct iwl_he_pkt_ext_v1 {
+	u8 pkt_ext_qam_th[MAX_HE_SUPP_NSS][MAX_CHANNEL_BW_INDX_API_D_VER_2][2];
+} __packed; /* PKT_EXT_DOT11AX_API_S_VER_1 */
+
+/**
+ * struct iwl_he_pkt_ext_v2 - QAM thresholds
+ * The required PPE is set via HE Capabilities IE, per Nss x BW x MCS
+ * The IE is organized in the following way:
+ * Support for Nss x BW (or RU) matrix:
+ *	(0=SISO, 1=MIMO2) x (0-20MHz, 1-40MHz, 2-80MHz, 3-160MHz)
+ * Each entry contains 2 QAM thresholds for 8us and 16us:
+ *	0=BPSK, 1=QPSK, 2=16QAM, 3=64QAM, 4=256QAM, 5=1024QAM, 6=RES, 7=NONE
+ * i.e. QAM_th1 < QAM_th2 such if TX uses QAM_tx:
+ *	QAM_tx < QAM_th1            --> PPE=0us
+ *	QAM_th1 <= QAM_tx < QAM_th2 --> PPE=8us
+ *	QAM_th2 <= QAM_tx           --> PPE=16us
+ * @pkt_ext_qam_th: QAM thresholds
+ *	For each Nss/Bw define 2 QAM thrsholds (0..5)
+ *	For rates below the low_th, no need for PPE
+ *	For rates between low_th and high_th, need 8us PPE
+ *	For rates equal or higher then the high_th, need 16us PPE
+ *	Nss (0-siso, 1-mimo2) x
+ *	BW (0-20MHz, 1-40MHz, 2-80MHz, 3-160MHz, 4-320MHz) x
+ *	(0-low_th, 1-high_th)
+ */
+struct iwl_he_pkt_ext_v2 {
+	u8 pkt_ext_qam_th[MAX_HE_SUPP_NSS][MAX_CHANNEL_BW_INDX_API_D_VER_3][2];
+} __packed; /* PKT_EXT_DOT11AX_API_S_VER_2 */
+
+/**
+ * enum iwl_he_sta_ctxt_flags - HE STA context flags
+ * @STA_CTXT_HE_REF_BSSID_VALID: ref bssid addr valid (for receiving specific
+ *	control frames such as TRIG, NDPA, BACK)
+ * @STA_CTXT_HE_BSS_COLOR_DIS: BSS color disable, don't use the BSS
+ *	color for RX filter but use MAC header
+ * @STA_CTXT_HE_PARTIAL_BSS_COLOR: partial BSS color allocation
+ * @STA_CTXT_HE_32BIT_BA_BITMAP: indicates the receiver supports BA bitmap
+ *	of 32-bits
+ * @STA_CTXT_HE_PACKET_EXT: indicates that the packet-extension info is valid
+ *	and should be used
+ * @STA_CTXT_HE_TRIG_RND_ALLOC: indicates that trigger based random allocation
+ *	is enabled according to UORA element existence
+ * @STA_CTXT_HE_CONST_TRIG_RND_ALLOC: used for AV testing
+ * @STA_CTXT_HE_ACK_ENABLED: indicates that the AP supports receiving ACK-
+ *	enabled AGG, i.e. both BACK and non-BACK frames in a single AGG
+ * @STA_CTXT_HE_MU_EDCA_CW: indicates that there is an element of MU EDCA
+ *	parameter set, i.e. the backoff counters for trig-based ACs
+ * @STA_CTXT_HE_NIC_NOT_ACK_ENABLED: mark that the NIC doesn't support receiving
+ *	ACK-enabled AGG, (i.e. both BACK and non-BACK frames in single AGG).
+ *	If the NIC is not ACK_ENABLED it may use the EOF-bit in first non-0
+ *	len delim to determine if AGG or single.
+ * @STA_CTXT_HE_RU_2MHZ_BLOCK: indicates that 26-tone RU OFDMA transmission are
+ *      not allowed (as there are OBSS that might classify such transmissions as
+ *      radar pulses).
+ * @STA_CTXT_HE_NDP_FEEDBACK_ENABLED: mark support for NDP feedback and change
+ *	of threshold
+ * @STA_CTXT_EHT_PUNCTURE_MASK_VALID: indicates the puncture_mask field is valid
+ * @STA_CTXT_EHT_LONG_PPE_ENABLED: indicates the PPE requirement should be
+ *	extended to 20us for BW > 160Mhz or for MCS w/ 4096-QAM.
+ */
+enum iwl_he_sta_ctxt_flags {
+	STA_CTXT_HE_REF_BSSID_VALID		= BIT(4),
+	STA_CTXT_HE_BSS_COLOR_DIS		= BIT(5),
+	STA_CTXT_HE_PARTIAL_BSS_COLOR		= BIT(6),
+	STA_CTXT_HE_32BIT_BA_BITMAP		= BIT(7),
+	STA_CTXT_HE_PACKET_EXT			= BIT(8),
+	STA_CTXT_HE_TRIG_RND_ALLOC		= BIT(9),
+	STA_CTXT_HE_CONST_TRIG_RND_ALLOC	= BIT(10),
+	STA_CTXT_HE_ACK_ENABLED			= BIT(11),
+	STA_CTXT_HE_MU_EDCA_CW			= BIT(12),
+	STA_CTXT_HE_NIC_NOT_ACK_ENABLED		= BIT(13),
+	STA_CTXT_HE_RU_2MHZ_BLOCK		= BIT(14),
+	STA_CTXT_HE_NDP_FEEDBACK_ENABLED	= BIT(15),
+	STA_CTXT_EHT_PUNCTURE_MASK_VALID	= BIT(16),
+	STA_CTXT_EHT_LONG_PPE_ENABLED		= BIT(17),
+};
+
+/**
+ * enum iwl_he_htc_flags - HE HTC support flags
+ * @IWL_HE_HTC_SUPPORT: HE-HTC support
+ * @IWL_HE_HTC_UL_MU_RESP_SCHED: HE UL MU response schedule
+ *	support via A-control field
+ * @IWL_HE_HTC_BSR_SUPP: BSR support in A-control field
+ * @IWL_HE_HTC_OMI_SUPP: A-OMI support in A-control field
+ * @IWL_HE_HTC_BQR_SUPP: A-BQR support in A-control field
+ */
+enum iwl_he_htc_flags {
+	IWL_HE_HTC_SUPPORT			= BIT(0),
+	IWL_HE_HTC_UL_MU_RESP_SCHED		= BIT(3),
+	IWL_HE_HTC_BSR_SUPP			= BIT(4),
+	IWL_HE_HTC_OMI_SUPP			= BIT(5),
+	IWL_HE_HTC_BQR_SUPP			= BIT(6),
+};
+
+/*
+ * @IWL_HE_HTC_LINK_ADAP_NO_FEEDBACK: the STA does not provide HE MFB
+ * @IWL_HE_HTC_LINK_ADAP_UNSOLICITED: the STA provides only unsolicited HE MFB
+ * @IWL_HE_HTC_LINK_ADAP_BOTH: the STA is capable of providing HE MFB in
+ *      response to HE MRQ and if the STA provides unsolicited HE MFB
+ */
+#define IWL_HE_HTC_LINK_ADAP_POS		(1)
+#define IWL_HE_HTC_LINK_ADAP_NO_FEEDBACK	(0)
+#define IWL_HE_HTC_LINK_ADAP_UNSOLICITED	(2 << IWL_HE_HTC_LINK_ADAP_POS)
+#define IWL_HE_HTC_LINK_ADAP_BOTH		(3 << IWL_HE_HTC_LINK_ADAP_POS)
+
+/**
+ * struct iwl_he_sta_context_cmd_v1 - configure FW to work with HE AP
+ * @sta_id: STA id
+ * @tid_limit: max num of TIDs in TX HE-SU multi-TID agg
+ *	0 - bad value, 1 - multi-tid not supported, 2..8 - tid limit
+ * @reserved1: reserved byte for future use
+ * @reserved2: reserved byte for future use
+ * @flags: see %iwl_11ax_sta_ctxt_flags
+ * @ref_bssid_addr: reference BSSID used by the AP
+ * @reserved0: reserved 2 bytes for aligning the ref_bssid_addr field to 8 bytes
+ * @htc_flags: which features are supported in HTC
+ * @frag_flags: frag support in A-MSDU
+ * @frag_level: frag support level
+ * @frag_max_num: max num of "open" MSDUs in the receiver (in power of 2)
+ * @frag_min_size: min frag size (except last frag)
+ * @pkt_ext: optional, exists according to PPE-present bit in the HE-PHY capa
+ * @bss_color: 11ax AP ID that is used in the HE SIG-A to mark inter BSS frame
+ * @htc_trig_based_pkt_ext: default PE in 4us units
+ * @frame_time_rts_th: HE duration RTS threshold, in units of 32us
+ * @rand_alloc_ecwmin: random CWmin = 2**ECWmin-1
+ * @rand_alloc_ecwmax: random CWmax = 2**ECWmax-1
+ * @reserved3: reserved byte for future use
+ * @trig_based_txf: MU EDCA Parameter set for the trigger based traffic queues
+ */
+struct iwl_he_sta_context_cmd_v1 {
+	u8 sta_id;
+	u8 tid_limit;
+	u8 reserved1;
+	u8 reserved2;
+	__le32 flags;
+
+	/* The below fields are set via Multiple BSSID IE */
+	u8 ref_bssid_addr[6];
+	__le16 reserved0;
+
+	/* The below fields are set via HE-capabilities IE */
+	__le32 htc_flags;
+
+	u8 frag_flags;
+	u8 frag_level;
+	u8 frag_max_num;
+	u8 frag_min_size;
+
+	/* The below fields are set via PPE thresholds element */
+	struct iwl_he_pkt_ext_v1 pkt_ext;
+
+	/* The below fields are set via HE-Operation IE */
+	u8 bss_color;
+	u8 htc_trig_based_pkt_ext;
+	__le16 frame_time_rts_th;
+
+	/* Random access parameter set (i.e. RAPS) */
+	u8 rand_alloc_ecwmin;
+	u8 rand_alloc_ecwmax;
+	__le16 reserved3;
+
+	/* The below fields are set via MU EDCA parameter set element */
+	struct iwl_he_backoff_conf trig_based_txf[AC_NUM];
+} __packed; /* STA_CONTEXT_DOT11AX_API_S_VER_1 */
+
+/**
+ * struct iwl_he_sta_context_cmd_v2 - configure FW to work with HE AP
+ * @sta_id: STA id
+ * @tid_limit: max num of TIDs in TX HE-SU multi-TID agg
+ *	0 - bad value, 1 - multi-tid not supported, 2..8 - tid limit
+ * @reserved1: reserved byte for future use
+ * @reserved2: reserved byte for future use
+ * @flags: see %iwl_11ax_sta_ctxt_flags
+ * @ref_bssid_addr: reference BSSID used by the AP
+ * @reserved0: reserved 2 bytes for aligning the ref_bssid_addr field to 8 bytes
+ * @htc_flags: which features are supported in HTC
+ * @frag_flags: frag support in A-MSDU
+ * @frag_level: frag support level
+ * @frag_max_num: max num of "open" MSDUs in the receiver (in power of 2)
+ * @frag_min_size: min frag size (except last frag)
+ * @pkt_ext: optional, exists according to PPE-present bit in the HE-PHY capa
+ * @bss_color: 11ax AP ID that is used in the HE SIG-A to mark inter BSS frame
+ * @htc_trig_based_pkt_ext: default PE in 4us units
+ * @frame_time_rts_th: HE duration RTS threshold, in units of 32us
+ * @rand_alloc_ecwmin: random CWmin = 2**ECWmin-1
+ * @rand_alloc_ecwmax: random CWmax = 2**ECWmax-1
+ * @reserved3: reserved byte for future use
+ * @trig_based_txf: MU EDCA Parameter set for the trigger based traffic queues
+ * @max_bssid_indicator: indicator of the max bssid supported on the associated
+ *	bss
+ * @bssid_index: index of the associated VAP
+ * @ema_ap: AP supports enhanced Multi BSSID advertisement
+ * @profile_periodicity: number of Beacon periods that are needed to receive the
+ *	complete VAPs info
+ * @bssid_count: actual number of VAPs in the MultiBSS Set
+ * @reserved4: alignment
+ */
+struct iwl_he_sta_context_cmd_v2 {
+	u8 sta_id;
+	u8 tid_limit;
+	u8 reserved1;
+	u8 reserved2;
+	__le32 flags;
+
+	/* The below fields are set via Multiple BSSID IE */
+	u8 ref_bssid_addr[6];
+	__le16 reserved0;
+
+	/* The below fields are set via HE-capabilities IE */
+	__le32 htc_flags;
+
+	u8 frag_flags;
+	u8 frag_level;
+	u8 frag_max_num;
+	u8 frag_min_size;
+
+	/* The below fields are set via PPE thresholds element */
+	struct iwl_he_pkt_ext_v1 pkt_ext;
+
+	/* The below fields are set via HE-Operation IE */
+	u8 bss_color;
+	u8 htc_trig_based_pkt_ext;
+	__le16 frame_time_rts_th;
+
+	/* Random access parameter set (i.e. RAPS) */
+	u8 rand_alloc_ecwmin;
+	u8 rand_alloc_ecwmax;
+	__le16 reserved3;
+
+	/* The below fields are set via MU EDCA parameter set element */
+	struct iwl_he_backoff_conf trig_based_txf[AC_NUM];
+
+	u8 max_bssid_indicator;
+	u8 bssid_index;
+	u8 ema_ap;
+	u8 profile_periodicity;
+	u8 bssid_count;
+	u8 reserved4[3];
+} __packed; /* STA_CONTEXT_DOT11AX_API_S_VER_2 */
+
+/**
+ * struct iwl_he_sta_context_cmd_v3 - configure FW to work with HE AP
+ * @sta_id: STA id
+ * @tid_limit: max num of TIDs in TX HE-SU multi-TID agg
+ *	0 - bad value, 1 - multi-tid not supported, 2..8 - tid limit
+ * @reserved1: reserved byte for future use
+ * @reserved2: reserved byte for future use
+ * @flags: see %iwl_11ax_sta_ctxt_flags
+ * @ref_bssid_addr: reference BSSID used by the AP
+ * @reserved0: reserved 2 bytes for aligning the ref_bssid_addr field to 8 bytes
+ * @htc_flags: which features are supported in HTC
+ * @frag_flags: frag support in A-MSDU
+ * @frag_level: frag support level
+ * @frag_max_num: max num of "open" MSDUs in the receiver (in power of 2)
+ * @frag_min_size: min frag size (except last frag)
+ * @pkt_ext: optional, exists according to PPE-present bit in the HE-PHY capa
+ * @bss_color: 11ax AP ID that is used in the HE SIG-A to mark inter BSS frame
+ * @htc_trig_based_pkt_ext: default PE in 4us units
+ * @frame_time_rts_th: HE duration RTS threshold, in units of 32us
+ * @rand_alloc_ecwmin: random CWmin = 2**ECWmin-1
+ * @rand_alloc_ecwmax: random CWmax = 2**ECWmax-1
+ * @puncture_mask: puncture mask for EHT
+ * @trig_based_txf: MU EDCA Parameter set for the trigger based traffic queues
+ * @max_bssid_indicator: indicator of the max bssid supported on the associated
+ *	bss
+ * @bssid_index: index of the associated VAP
+ * @ema_ap: AP supports enhanced Multi BSSID advertisement
+ * @profile_periodicity: number of Beacon periods that are needed to receive the
+ *	complete VAPs info
+ * @bssid_count: actual number of VAPs in the MultiBSS Set
+ * @reserved4: alignment
+ */
+struct iwl_he_sta_context_cmd_v3 {
+	u8 sta_id;
+	u8 tid_limit;
+	u8 reserved1;
+	u8 reserved2;
+	__le32 flags;
+
+	/* The below fields are set via Multiple BSSID IE */
+	u8 ref_bssid_addr[6];
+	__le16 reserved0;
+
+	/* The below fields are set via HE-capabilities IE */
+	__le32 htc_flags;
+
+	u8 frag_flags;
+	u8 frag_level;
+	u8 frag_max_num;
+	u8 frag_min_size;
+
+	/* The below fields are set via PPE thresholds element */
+	struct iwl_he_pkt_ext_v2 pkt_ext;
+
+	/* The below fields are set via HE-Operation IE */
+	u8 bss_color;
+	u8 htc_trig_based_pkt_ext;
+	__le16 frame_time_rts_th;
+
+	/* Random access parameter set (i.e. RAPS) */
+	u8 rand_alloc_ecwmin;
+	u8 rand_alloc_ecwmax;
+	__le16 puncture_mask;
+
+	/* The below fields are set via MU EDCA parameter set element */
+	struct iwl_he_backoff_conf trig_based_txf[AC_NUM];
+
+	u8 max_bssid_indicator;
+	u8 bssid_index;
+	u8 ema_ap;
+	u8 profile_periodicity;
+	u8 bssid_count;
+	u8 reserved4[3];
+} __packed; /* STA_CONTEXT_DOT11AX_API_S_VER_2 */
+
+/**
+ * struct iwl_he_monitor_cmd - configure air sniffer for HE
+ * @bssid: the BSSID to sniff for
+ * @reserved1: reserved for dword alignment
+ * @aid: the AID to track on for HE MU
+ * @reserved2: reserved for future use
+ */
+struct iwl_he_monitor_cmd {
+	u8 bssid[6];
+	__le16 reserved1;
+	__le16 aid;
+	u8 reserved2[6];
+} __packed; /* HE_AIR_SNIFFER_CONFIG_CMD_API_S_VER_1 */
+
+#endif /* __iwl_fw_api_mac_h__ */