Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 226 insertions, 0 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/phy.h b/drivers/net/wireless/intel/iwlwifi/fw/api/phy.h
new file mode 100644
index 000000000..b1b9c2985
--- /dev/null
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api/phy.h
@@ -0,0 +1,226 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
+/*
+ * Copyright (C) 2012-2014, 2019-2021 Intel Corporation
+ * Copyright (C) 2013-2015 Intel Mobile Communications GmbH
+ * Copyright (C) 2016-2017 Intel Deutschland GmbH
+ */
+#ifndef __iwl_fw_api_phy_h__
+#define __iwl_fw_api_phy_h__
+
+/**
+ * enum iwl_phy_ops_subcmd_ids - PHY group commands
+ */
+enum iwl_phy_ops_subcmd_ids {
+	/**
+	 * @CMD_DTS_MEASUREMENT_TRIGGER_WIDE:
+	 * Uses either &struct iwl_dts_measurement_cmd or
+	 * &struct iwl_ext_dts_measurement_cmd
+	 */
+	CMD_DTS_MEASUREMENT_TRIGGER_WIDE = 0x0,
+
+	/**
+	 * @CTDP_CONFIG_CMD: &struct iwl_mvm_ctdp_cmd
+	 */
+	CTDP_CONFIG_CMD = 0x03,
+
+	/**
+	 * @TEMP_REPORTING_THRESHOLDS_CMD: &struct temp_report_ths_cmd
+	 */
+	TEMP_REPORTING_THRESHOLDS_CMD = 0x04,
+
+	/**
+	 * @PER_CHAIN_LIMIT_OFFSET_CMD: &struct iwl_geo_tx_power_profiles_cmd
+	 */
+	PER_CHAIN_LIMIT_OFFSET_CMD = 0x05,
+
+	/**
+	 * @PER_PLATFORM_ANT_GAIN_CMD: &struct iwl_ppag_table_cmd
+	 */
+	PER_PLATFORM_ANT_GAIN_CMD = 0x07,
+
+	/**
+	 * @CT_KILL_NOTIFICATION: &struct ct_kill_notif
+	 */
+	CT_KILL_NOTIFICATION = 0xFE,
+
+	/**
+	 * @DTS_MEASUREMENT_NOTIF_WIDE:
+	 * &struct iwl_dts_measurement_notif_v1 or
+	 * &struct iwl_dts_measurement_notif_v2
+	 */
+	DTS_MEASUREMENT_NOTIF_WIDE = 0xFF,
+};
+
+/* DTS measurements */
+
+enum iwl_dts_measurement_flags {
+	DTS_TRIGGER_CMD_FLAGS_TEMP	= BIT(0),
+	DTS_TRIGGER_CMD_FLAGS_VOLT	= BIT(1),
+};
+
+/**
+ * struct iwl_dts_measurement_cmd - request DTS temp and/or voltage measurements
+ *
+ * @flags: indicates which measurements we want as specified in
+ *	&enum iwl_dts_measurement_flags
+ */
+struct iwl_dts_measurement_cmd {
+	__le32 flags;
+} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_CMD_S */
+
+/**
+* enum iwl_dts_control_measurement_mode - DTS measurement type
+* @DTS_AUTOMATIC: Automatic mode (full SW control). Provide temperature read
+*                 back (latest value. Not waiting for new value). Use automatic
+*                 SW DTS configuration.
+* @DTS_REQUEST_READ: Request DTS read. Configure DTS with manual settings,
+*                    trigger DTS reading and provide read back temperature read
+*                    when available.
+* @DTS_OVER_WRITE: over-write the DTS temperatures in the SW until next read
+* @DTS_DIRECT_WITHOUT_MEASURE: DTS returns its latest temperature result,
+*                              without measurement trigger.
+*/
+enum iwl_dts_control_measurement_mode {
+	DTS_AUTOMATIC			= 0,
+	DTS_REQUEST_READ		= 1,
+	DTS_OVER_WRITE			= 2,
+	DTS_DIRECT_WITHOUT_MEASURE	= 3,
+};
+
+/**
+* enum iwl_dts_used - DTS to use or used for measurement in the DTS request
+* @DTS_USE_TOP: Top
+* @DTS_USE_CHAIN_A: chain A
+* @DTS_USE_CHAIN_B: chain B
+* @DTS_USE_CHAIN_C: chain C
+* @XTAL_TEMPERATURE: read temperature from xtal
+*/
+enum iwl_dts_used {
+	DTS_USE_TOP		= 0,
+	DTS_USE_CHAIN_A		= 1,
+	DTS_USE_CHAIN_B		= 2,
+	DTS_USE_CHAIN_C		= 3,
+	XTAL_TEMPERATURE	= 4,
+};
+
+/**
+* enum iwl_dts_bit_mode - bit-mode to use in DTS request read mode
+* @DTS_BIT6_MODE: bit 6 mode
+* @DTS_BIT8_MODE: bit 8 mode
+*/
+enum iwl_dts_bit_mode {
+	DTS_BIT6_MODE	= 0,
+	DTS_BIT8_MODE	= 1,
+};
+
+/**
+ * struct iwl_ext_dts_measurement_cmd - request extended DTS temp measurements
+ * @control_mode: see &enum iwl_dts_control_measurement_mode
+ * @temperature: used when over write DTS mode is selected
+ * @sensor: set temperature sensor to use. See &enum iwl_dts_used
+ * @avg_factor: average factor to DTS in request DTS read mode
+ * @bit_mode: value defines the DTS bit mode to use. See &enum iwl_dts_bit_mode
+ * @step_duration: step duration for the DTS
+ */
+struct iwl_ext_dts_measurement_cmd {
+	__le32 control_mode;
+	__le32 temperature;
+	__le32 sensor;
+	__le32 avg_factor;
+	__le32 bit_mode;
+	__le32 step_duration;
+} __packed; /* XVT_FW_DTS_CONTROL_MEASUREMENT_REQUEST_API_S */
+
+/**
+ * struct iwl_dts_measurement_notif_v1 - measurements notification
+ *
+ * @temp: the measured temperature
+ * @voltage: the measured voltage
+ */
+struct iwl_dts_measurement_notif_v1 {
+	__le32 temp;
+	__le32 voltage;
+} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_1*/
+
+/**
+ * struct iwl_dts_measurement_notif_v2 - measurements notification
+ *
+ * @temp: the measured temperature
+ * @voltage: the measured voltage
+ * @threshold_idx: the trip index that was crossed
+ */
+struct iwl_dts_measurement_notif_v2 {
+	__le32 temp;
+	__le32 voltage;
+	__le32 threshold_idx;
+} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_2 */
+
+/**
+ * struct iwl_dts_measurement_resp - measurements response
+ *
+ * @temp: the measured temperature
+ */
+struct iwl_dts_measurement_resp {
+	__le32 temp;
+} __packed; /* CMD_DTS_MEASUREMENT_RSP_API_S_VER_1 */
+
+/**
+ * struct ct_kill_notif - CT-kill entry notification
+ * This structure represent both versions of this notification.
+ *
+ * @temperature: the current temperature in celsius
+ * @dts: only in v2: DTS that trigger the CT Kill bitmap:
+ *			bit 0: ToP master
+ *			bit 1: PA chain A master
+ *			bit 2: PA chain B master
+ *			bit 3: ToP slave
+ *			bit 4: PA chain A slave
+ *			bit 5: PA chain B slave)
+ *			bits 6,7: reserved (set to 0)
+ * @scheme: only for v2: scheme that trigger the CT Kill (0-SW, 1-HW)
+ */
+struct ct_kill_notif {
+	__le16 temperature;
+	u8 dts;
+	u8 scheme;
+} __packed; /* CT_KILL_NOTIFICATION_API_S_VER_1, CT_KILL_NOTIFICATION_API_S_VER_2 */
+
+/**
+* enum ctdp_cmd_operation - CTDP command operations
+* @CTDP_CMD_OPERATION_START: update the current budget
+* @CTDP_CMD_OPERATION_STOP: stop ctdp
+* @CTDP_CMD_OPERATION_REPORT: get the average budget
+*/
+enum iwl_mvm_ctdp_cmd_operation {
+	CTDP_CMD_OPERATION_START	= 0x1,
+	CTDP_CMD_OPERATION_STOP		= 0x2,
+	CTDP_CMD_OPERATION_REPORT	= 0x4,
+};/* CTDP_CMD_OPERATION_TYPE_E */
+
+/**
+ * struct iwl_mvm_ctdp_cmd - track and manage the FW power consumption budget
+ *
+ * @operation: see &enum iwl_mvm_ctdp_cmd_operation
+ * @budget: the budget in milliwatt
+ * @window_size: defined in API but not used
+ */
+struct iwl_mvm_ctdp_cmd {
+	__le32 operation;
+	__le32 budget;
+	__le32 window_size;
+} __packed;
+
+#define IWL_MAX_DTS_TRIPS	8
+
+/**
+ * struct temp_report_ths_cmd - set temperature thresholds
+ *
+ * @num_temps: number of temperature thresholds passed
+ * @thresholds: array with the thresholds to be configured
+ */
+struct temp_report_ths_cmd {
+	__le32 num_temps;
+	__le16 thresholds[IWL_MAX_DTS_TRIPS];
+} __packed; /* GRP_PHY_TEMP_REPORTING_THRESHOLDS_CMD */
+
+#endif /* __iwl_fw_api_phy_h__ */