Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 670 insertions, 0 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/power.h b/drivers/net/wireless/intel/iwlwifi/fw/api/power.h
new file mode 100644
index 000000000..f92cac1da
--- /dev/null
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api/power.h
@@ -0,0 +1,670 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
+/*
+ * Copyright (C) 2012-2014, 2018-2022 Intel Corporation
+ * Copyright (C) 2013-2014 Intel Mobile Communications GmbH
+ * Copyright (C) 2015-2017 Intel Deutschland GmbH
+ */
+#ifndef __iwl_fw_api_power_h__
+#define __iwl_fw_api_power_h__
+
+/* Power Management Commands, Responses, Notifications */
+
+/**
+ * enum iwl_ltr_config_flags - masks for LTR config command flags
+ * @LTR_CFG_FLAG_FEATURE_ENABLE: Feature operational status
+ * @LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS: allow LTR change on shadow
+ *	memory access
+ * @LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH: allow LTR msg send on ANY LTR
+ *	reg change
+ * @LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3: allow LTR msg send on transition from
+ *	D0 to D3
+ * @LTR_CFG_FLAG_SW_SET_SHORT: fixed static short LTR register
+ * @LTR_CFG_FLAG_SW_SET_LONG: fixed static short LONG register
+ * @LTR_CFG_FLAG_DENIE_C10_ON_PD: allow going into C10 on PD
+ * @LTR_CFG_FLAG_UPDATE_VALUES: update config values and short
+ *	idle timeout
+ */
+enum iwl_ltr_config_flags {
+	LTR_CFG_FLAG_FEATURE_ENABLE = BIT(0),
+	LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS = BIT(1),
+	LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH = BIT(2),
+	LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3 = BIT(3),
+	LTR_CFG_FLAG_SW_SET_SHORT = BIT(4),
+	LTR_CFG_FLAG_SW_SET_LONG = BIT(5),
+	LTR_CFG_FLAG_DENIE_C10_ON_PD = BIT(6),
+	LTR_CFG_FLAG_UPDATE_VALUES = BIT(7),
+};
+
+/**
+ * struct iwl_ltr_config_cmd_v1 - configures the LTR
+ * @flags: See &enum iwl_ltr_config_flags
+ * @static_long: static LTR Long register value.
+ * @static_short: static LTR Short register value.
+ */
+struct iwl_ltr_config_cmd_v1 {
+	__le32 flags;
+	__le32 static_long;
+	__le32 static_short;
+} __packed; /* LTR_CAPABLE_API_S_VER_1 */
+
+#define LTR_VALID_STATES_NUM 4
+
+/**
+ * struct iwl_ltr_config_cmd - configures the LTR
+ * @flags: See &enum iwl_ltr_config_flags
+ * @static_long: static LTR Long register value.
+ * @static_short: static LTR Short register value.
+ * @ltr_cfg_values: LTR parameters table values (in usec) in folowing order:
+ *	TX, RX, Short Idle, Long Idle. Used only if %LTR_CFG_FLAG_UPDATE_VALUES
+ *	is set.
+ * @ltr_short_idle_timeout: LTR Short Idle timeout (in usec). Used only if
+ *	%LTR_CFG_FLAG_UPDATE_VALUES is set.
+ */
+struct iwl_ltr_config_cmd {
+	__le32 flags;
+	__le32 static_long;
+	__le32 static_short;
+	__le32 ltr_cfg_values[LTR_VALID_STATES_NUM];
+	__le32 ltr_short_idle_timeout;
+} __packed; /* LTR_CAPABLE_API_S_VER_2 */
+
+/* Radio LP RX Energy Threshold measured in dBm */
+#define POWER_LPRX_RSSI_THRESHOLD	75
+#define POWER_LPRX_RSSI_THRESHOLD_MAX	94
+#define POWER_LPRX_RSSI_THRESHOLD_MIN	30
+
+/**
+ * enum iwl_power_flags - masks for power table command flags
+ * @POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off
+ *		receiver and transmitter. '0' - does not allow.
+ * @POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK: '0' Driver disables power management,
+ *		'1' Driver enables PM (use rest of parameters)
+ * @POWER_FLAGS_SKIP_OVER_DTIM_MSK: '0' PM have to walk up every DTIM,
+ *		'1' PM could sleep over DTIM till listen Interval.
+ * @POWER_FLAGS_SNOOZE_ENA_MSK: Enable snoozing only if uAPSD is enabled and all
+ *		access categories are both delivery and trigger enabled.
+ * @POWER_FLAGS_BT_SCO_ENA: Enable BT SCO coex only if uAPSD and
+ *		PBW Snoozing enabled
+ * @POWER_FLAGS_ADVANCE_PM_ENA_MSK: Advanced PM (uAPSD) enable mask
+ * @POWER_FLAGS_LPRX_ENA_MSK: Low Power RX enable.
+ * @POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK: AP/GO's uAPSD misbehaving
+ *		detection enablement
+*/
+enum iwl_power_flags {
+	POWER_FLAGS_POWER_SAVE_ENA_MSK		= BIT(0),
+	POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK	= BIT(1),
+	POWER_FLAGS_SKIP_OVER_DTIM_MSK		= BIT(2),
+	POWER_FLAGS_SNOOZE_ENA_MSK		= BIT(5),
+	POWER_FLAGS_BT_SCO_ENA			= BIT(8),
+	POWER_FLAGS_ADVANCE_PM_ENA_MSK		= BIT(9),
+	POWER_FLAGS_LPRX_ENA_MSK		= BIT(11),
+	POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK	= BIT(12),
+};
+
+#define IWL_POWER_VEC_SIZE 5
+
+/**
+ * struct iwl_powertable_cmd - legacy power command. Beside old API support this
+ *	is used also with a new	power API for device wide power settings.
+ * POWER_TABLE_CMD = 0x77 (command, has simple generic response)
+ *
+ * @flags:		Power table command flags from POWER_FLAGS_*
+ * @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec.
+ *			Minimum allowed:- 3 * DTIM. Keep alive period must be
+ *			set regardless of power scheme or current power state.
+ *			FW use this value also when PM is disabled.
+ * @debug_flags:	debug flags
+ * @rx_data_timeout:    Minimum time (usec) from last Rx packet for AM to
+ *			PSM transition - legacy PM
+ * @tx_data_timeout:    Minimum time (usec) from last Tx packet for AM to
+ *			PSM transition - legacy PM
+ * @sleep_interval:	not in use
+ * @skip_dtim_periods:	Number of DTIM periods to skip if Skip over DTIM flag
+ *			is set. For example, if it is required to skip over
+ *			one DTIM, this value need to be set to 2 (DTIM periods).
+ * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled.
+ *			Default: 80dbm
+ */
+struct iwl_powertable_cmd {
+	/* PM_POWER_TABLE_CMD_API_S_VER_6 */
+	__le16 flags;
+	u8 keep_alive_seconds;
+	u8 debug_flags;
+	__le32 rx_data_timeout;
+	__le32 tx_data_timeout;
+	__le32 sleep_interval[IWL_POWER_VEC_SIZE];
+	__le32 skip_dtim_periods;
+	__le32 lprx_rssi_threshold;
+} __packed;
+
+/**
+ * enum iwl_device_power_flags - masks for device power command flags
+ * @DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK:
+ *	'1' Allow to save power by turning off
+ *	receiver and transmitter. '0' - does not allow.
+ * @DEVICE_POWER_FLAGS_ALLOW_MEM_RETENTION_MSK:
+ *	Device Retention indication, '1' indicate retention is enabled.
+ * @DEVICE_POWER_FLAGS_32K_CLK_VALID_MSK:
+ *	32Khz external slow clock valid indication, '1' indicate cloack is
+ *	valid.
+*/
+enum iwl_device_power_flags {
+	DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK		= BIT(0),
+	DEVICE_POWER_FLAGS_ALLOW_MEM_RETENTION_MSK	= BIT(1),
+	DEVICE_POWER_FLAGS_32K_CLK_VALID_MSK		= BIT(12),
+};
+
+/**
+ * struct iwl_device_power_cmd - device wide power command.
+ * DEVICE_POWER_CMD = 0x77 (command, has simple generic response)
+ *
+ * @flags:	Power table command flags from &enum iwl_device_power_flags
+ * @reserved: reserved (padding)
+ */
+struct iwl_device_power_cmd {
+	/* PM_POWER_TABLE_CMD_API_S_VER_6 */
+	__le16 flags;
+	__le16 reserved;
+} __packed;
+
+/**
+ * struct iwl_mac_power_cmd - New power command containing uAPSD support
+ * MAC_PM_POWER_TABLE = 0xA9 (command, has simple generic response)
+ * @id_and_color:	MAC contex identifier, &enum iwl_ctxt_id_and_color
+ * @flags:		Power table command flags from POWER_FLAGS_*
+ * @keep_alive_seconds:	Keep alive period in seconds. Default - 25 sec.
+ *			Minimum allowed:- 3 * DTIM. Keep alive period must be
+ *			set regardless of power scheme or current power state.
+ *			FW use this value also when PM is disabled.
+ * @rx_data_timeout:    Minimum time (usec) from last Rx packet for AM to
+ *			PSM transition - legacy PM
+ * @tx_data_timeout:    Minimum time (usec) from last Tx packet for AM to
+ *			PSM transition - legacy PM
+ * @skip_dtim_periods:	Number of DTIM periods to skip if Skip over DTIM flag
+ *			is set. For example, if it is required to skip over
+ *			one DTIM, this value need to be set to 2 (DTIM periods).
+ * @rx_data_timeout_uapsd: Minimum time (usec) from last Rx packet for AM to
+ *			PSM transition - uAPSD
+ * @tx_data_timeout_uapsd: Minimum time (usec) from last Tx packet for AM to
+ *			PSM transition - uAPSD
+ * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled.
+ *			Default: 80dbm
+ * @snooze_interval:	Maximum time between attempts to retrieve buffered data
+ *			from the AP [msec]
+ * @snooze_window:	A window of time in which PBW snoozing insures that all
+ *			packets received. It is also the minimum time from last
+ *			received unicast RX packet, before client stops snoozing
+ *			for data. [msec]
+ * @snooze_step:	TBD
+ * @qndp_tid:		TID client shall use for uAPSD QNDP triggers
+ * @uapsd_ac_flags:	Set trigger-enabled and delivery-enabled indication for
+ *			each corresponding AC.
+ *			Use IEEE80211_WMM_IE_STA_QOSINFO_AC* for correct values.
+ * @uapsd_max_sp:	Use IEEE80211_WMM_IE_STA_QOSINFO_SP_* for correct
+ *			values.
+ * @heavy_tx_thld_packets:	TX threshold measured in number of packets
+ * @heavy_rx_thld_packets:	RX threshold measured in number of packets
+ * @heavy_tx_thld_percentage:	TX threshold measured in load's percentage
+ * @heavy_rx_thld_percentage:	RX threshold measured in load's percentage
+ * @limited_ps_threshold: (unused)
+ * @reserved: reserved (padding)
+ */
+struct iwl_mac_power_cmd {
+	/* CONTEXT_DESC_API_T_VER_1 */
+	__le32 id_and_color;
+
+	/* CLIENT_PM_POWER_TABLE_S_VER_1 */
+	__le16 flags;
+	__le16 keep_alive_seconds;
+	__le32 rx_data_timeout;
+	__le32 tx_data_timeout;
+	__le32 rx_data_timeout_uapsd;
+	__le32 tx_data_timeout_uapsd;
+	u8 lprx_rssi_threshold;
+	u8 skip_dtim_periods;
+	__le16 snooze_interval;
+	__le16 snooze_window;
+	u8 snooze_step;
+	u8 qndp_tid;
+	u8 uapsd_ac_flags;
+	u8 uapsd_max_sp;
+	u8 heavy_tx_thld_packets;
+	u8 heavy_rx_thld_packets;
+	u8 heavy_tx_thld_percentage;
+	u8 heavy_rx_thld_percentage;
+	u8 limited_ps_threshold;
+	u8 reserved;
+} __packed;
+
+/*
+ * struct iwl_uapsd_misbehaving_ap_notif - FW sends this notification when
+ * associated AP is identified as improperly implementing uAPSD protocol.
+ * PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78
+ * @sta_id: index of station in uCode's station table - associated AP ID in
+ *	    this context.
+ */
+struct iwl_uapsd_misbehaving_ap_notif {
+	__le32 sta_id;
+	u8 mac_id;
+	u8 reserved[3];
+} __packed;
+
+/**
+ * struct iwl_reduce_tx_power_cmd - TX power reduction command
+ * REDUCE_TX_POWER_CMD = 0x9f
+ * @flags: (reserved for future implementation)
+ * @mac_context_id: id of the mac ctx for which we are reducing TX power.
+ * @pwr_restriction: TX power restriction in dBms.
+ */
+struct iwl_reduce_tx_power_cmd {
+	u8 flags;
+	u8 mac_context_id;
+	__le16 pwr_restriction;
+} __packed; /* TX_REDUCED_POWER_API_S_VER_1 */
+
+enum iwl_dev_tx_power_cmd_mode {
+	IWL_TX_POWER_MODE_SET_MAC = 0,
+	IWL_TX_POWER_MODE_SET_DEVICE = 1,
+	IWL_TX_POWER_MODE_SET_CHAINS = 2,
+	IWL_TX_POWER_MODE_SET_ACK = 3,
+	IWL_TX_POWER_MODE_SET_SAR_TIMER = 4,
+	IWL_TX_POWER_MODE_SET_SAR_TIMER_DEFAULT_TABLE = 5,
+}; /* TX_POWER_REDUCED_FLAGS_TYPE_API_E_VER_5 */;
+
+#define IWL_NUM_CHAIN_TABLES	1
+#define IWL_NUM_CHAIN_TABLES_V2	2
+#define IWL_NUM_CHAIN_LIMITS	2
+#define IWL_NUM_SUB_BANDS_V1	5
+#define IWL_NUM_SUB_BANDS_V2	11
+
+/**
+ * struct iwl_dev_tx_power_common - Common part of the TX power reduction cmd
+ * @set_mode: see &enum iwl_dev_tx_power_cmd_mode
+ * @mac_context_id: id of the mac ctx for which we are reducing TX power.
+ * @pwr_restriction: TX power restriction in 1/8 dBms.
+ * @dev_24: device TX power restriction in 1/8 dBms
+ * @dev_52_low: device TX power restriction upper band - low
+ * @dev_52_high: device TX power restriction upper band - high
+ */
+struct iwl_dev_tx_power_common {
+	__le32 set_mode;
+	__le32 mac_context_id;
+	__le16 pwr_restriction;
+	__le16 dev_24;
+	__le16 dev_52_low;
+	__le16 dev_52_high;
+};
+
+/**
+ * struct iwl_dev_tx_power_cmd_v3 - TX power reduction command version 3
+ * @per_chain: per chain restrictions
+ */
+struct iwl_dev_tx_power_cmd_v3 {
+	__le16 per_chain[IWL_NUM_CHAIN_TABLES][IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V1];
+} __packed; /* TX_REDUCED_POWER_API_S_VER_3 */
+
+#define IWL_DEV_MAX_TX_POWER 0x7FFF
+
+/**
+ * struct iwl_dev_tx_power_cmd_v4 - TX power reduction command version 4
+ * @per_chain: per chain restrictions
+ * @enable_ack_reduction: enable or disable close range ack TX power
+ *	reduction.
+ * @reserved: reserved (padding)
+ */
+struct iwl_dev_tx_power_cmd_v4 {
+	__le16 per_chain[IWL_NUM_CHAIN_TABLES][IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V1];
+	u8 enable_ack_reduction;
+	u8 reserved[3];
+} __packed; /* TX_REDUCED_POWER_API_S_VER_4 */
+
+/**
+ * struct iwl_dev_tx_power_cmd_v5 - TX power reduction command version 5
+ * @per_chain: per chain restrictions
+ * @enable_ack_reduction: enable or disable close range ack TX power
+ *	reduction.
+ * @per_chain_restriction_changed: is per_chain_restriction has changed
+ *	from last command. used if set_mode is
+ *	IWL_TX_POWER_MODE_SET_SAR_TIMER.
+ *	note: if not changed, the command is used for keep alive only.
+ * @reserved: reserved (padding)
+ * @timer_period: timer in milliseconds. if expires FW will change to default
+ *	BIOS values. relevant if setMode is IWL_TX_POWER_MODE_SET_SAR_TIMER
+ */
+struct iwl_dev_tx_power_cmd_v5 {
+	__le16 per_chain[IWL_NUM_CHAIN_TABLES][IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V1];
+	u8 enable_ack_reduction;
+	u8 per_chain_restriction_changed;
+	u8 reserved[2];
+	__le32 timer_period;
+} __packed; /* TX_REDUCED_POWER_API_S_VER_5 */
+
+/**
+ * struct iwl_dev_tx_power_cmd_v6 - TX power reduction command version 6
+ * @per_chain: per chain restrictions
+ * @enable_ack_reduction: enable or disable close range ack TX power
+ *	reduction.
+ * @per_chain_restriction_changed: is per_chain_restriction has changed
+ *	from last command. used if set_mode is
+ *	IWL_TX_POWER_MODE_SET_SAR_TIMER.
+ *	note: if not changed, the command is used for keep alive only.
+ * @reserved: reserved (padding)
+ * @timer_period: timer in milliseconds. if expires FW will change to default
+ *	BIOS values. relevant if setMode is IWL_TX_POWER_MODE_SET_SAR_TIMER
+ */
+struct iwl_dev_tx_power_cmd_v6 {
+	__le16 per_chain[IWL_NUM_CHAIN_TABLES_V2][IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V2];
+	u8 enable_ack_reduction;
+	u8 per_chain_restriction_changed;
+	u8 reserved[2];
+	__le32 timer_period;
+} __packed; /* TX_REDUCED_POWER_API_S_VER_6 */
+
+/**
+ * struct iwl_dev_tx_power_cmd_v7 - TX power reduction command version 7
+ * @per_chain: per chain restrictions
+ * @enable_ack_reduction: enable or disable close range ack TX power
+ *	reduction.
+ * @per_chain_restriction_changed: is per_chain_restriction has changed
+ *	from last command. used if set_mode is
+ *	IWL_TX_POWER_MODE_SET_SAR_TIMER.
+ *	note: if not changed, the command is used for keep alive only.
+ * @reserved: reserved (padding)
+ * @timer_period: timer in milliseconds. if expires FW will change to default
+ *	BIOS values. relevant if setMode is IWL_TX_POWER_MODE_SET_SAR_TIMER
+ * @flags: reduce power flags.
+ */
+struct iwl_dev_tx_power_cmd_v7 {
+	__le16 per_chain[IWL_NUM_CHAIN_TABLES_V2][IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V2];
+	u8 enable_ack_reduction;
+	u8 per_chain_restriction_changed;
+	u8 reserved[2];
+	__le32 timer_period;
+	__le32 flags;
+} __packed; /* TX_REDUCED_POWER_API_S_VER_7 */
+/**
+ * struct iwl_dev_tx_power_cmd - TX power reduction command (multiversion)
+ * @common: common part of the command
+ * @v3: version 3 part of the command
+ * @v4: version 4 part of the command
+ * @v5: version 5 part of the command
+ * @v6: version 6 part of the command
+ */
+struct iwl_dev_tx_power_cmd {
+	struct iwl_dev_tx_power_common common;
+	union {
+		struct iwl_dev_tx_power_cmd_v3 v3;
+		struct iwl_dev_tx_power_cmd_v4 v4;
+		struct iwl_dev_tx_power_cmd_v5 v5;
+		struct iwl_dev_tx_power_cmd_v6 v6;
+		struct iwl_dev_tx_power_cmd_v7 v7;
+	};
+};
+
+#define IWL_NUM_GEO_PROFILES		3
+#define IWL_NUM_GEO_PROFILES_V3		8
+#define IWL_NUM_BANDS_PER_CHAIN_V1	2
+#define IWL_NUM_BANDS_PER_CHAIN_V2	3
+
+/**
+ * enum iwl_geo_per_chain_offset_operation - type of operation
+ * @IWL_PER_CHAIN_OFFSET_SET_TABLES: send the tables from the host to the FW.
+ * @IWL_PER_CHAIN_OFFSET_GET_CURRENT_TABLE: retrieve the last configured table.
+ */
+enum iwl_geo_per_chain_offset_operation {
+	IWL_PER_CHAIN_OFFSET_SET_TABLES,
+	IWL_PER_CHAIN_OFFSET_GET_CURRENT_TABLE,
+};  /* PER_CHAIN_OFFSET_OPERATION_E */
+
+/**
+ * struct iwl_per_chain_offset - embedded struct for PER_CHAIN_LIMIT_OFFSET_CMD.
+ * @max_tx_power: maximum allowed tx power.
+ * @chain_a: tx power offset for chain a.
+ * @chain_b: tx power offset for chain b.
+ */
+struct iwl_per_chain_offset {
+	__le16 max_tx_power;
+	u8 chain_a;
+	u8 chain_b;
+} __packed; /* PER_CHAIN_LIMIT_OFFSET_PER_CHAIN_S_VER_1 */
+
+/**
+ * struct iwl_geo_tx_power_profile_cmd_v1 - struct for PER_CHAIN_LIMIT_OFFSET_CMD cmd.
+ * @ops: operations, value from &enum iwl_geo_per_chain_offset_operation
+ * @table: offset profile per band.
+ */
+struct iwl_geo_tx_power_profiles_cmd_v1 {
+	__le32 ops;
+	struct iwl_per_chain_offset table[IWL_NUM_GEO_PROFILES][IWL_NUM_BANDS_PER_CHAIN_V1];
+} __packed; /* PER_CHAIN_LIMIT_OFFSET_CMD_VER_1 */
+
+/**
+ * struct iwl_geo_tx_power_profile_cmd_v2 - struct for PER_CHAIN_LIMIT_OFFSET_CMD cmd.
+ * @ops: operations, value from &enum iwl_geo_per_chain_offset_operation
+ * @table: offset profile per band.
+ * @table_revision: 0 for not-South Korea, 1 for South Korea (the name is misleading)
+ */
+struct iwl_geo_tx_power_profiles_cmd_v2 {
+	__le32 ops;
+	struct iwl_per_chain_offset table[IWL_NUM_GEO_PROFILES][IWL_NUM_BANDS_PER_CHAIN_V1];
+	__le32 table_revision;
+} __packed; /* PER_CHAIN_LIMIT_OFFSET_CMD_VER_2 */
+
+/**
+ * struct iwl_geo_tx_power_profile_cmd_v3 - struct for PER_CHAIN_LIMIT_OFFSET_CMD cmd.
+ * @ops: operations, value from &enum iwl_geo_per_chain_offset_operation
+ * @table: offset profile per band.
+ * @table_revision: 0 for not-South Korea, 1 for South Korea (the name is misleading)
+ */
+struct iwl_geo_tx_power_profiles_cmd_v3 {
+	__le32 ops;
+	struct iwl_per_chain_offset table[IWL_NUM_GEO_PROFILES][IWL_NUM_BANDS_PER_CHAIN_V2];
+	__le32 table_revision;
+} __packed; /* PER_CHAIN_LIMIT_OFFSET_CMD_VER_3 */
+
+/**
+ * struct iwl_geo_tx_power_profile_cmd_v4 - struct for PER_CHAIN_LIMIT_OFFSET_CMD cmd.
+ * @ops: operations, value from &enum iwl_geo_per_chain_offset_operation
+ * @table: offset profile per band.
+ * @table_revision: 0 for not-South Korea, 1 for South Korea (the name is misleading)
+ */
+struct iwl_geo_tx_power_profiles_cmd_v4 {
+	__le32 ops;
+	struct iwl_per_chain_offset table[IWL_NUM_GEO_PROFILES_V3][IWL_NUM_BANDS_PER_CHAIN_V1];
+	__le32 table_revision;
+} __packed; /* PER_CHAIN_LIMIT_OFFSET_CMD_VER_4 */
+
+/**
+ * struct iwl_geo_tx_power_profile_cmd_v5 - struct for PER_CHAIN_LIMIT_OFFSET_CMD cmd.
+ * @ops: operations, value from &enum iwl_geo_per_chain_offset_operation
+ * @table: offset profile per band.
+ * @table_revision: 0 for not-South Korea, 1 for South Korea (the name is misleading)
+ */
+struct iwl_geo_tx_power_profiles_cmd_v5 {
+	__le32 ops;
+	struct iwl_per_chain_offset table[IWL_NUM_GEO_PROFILES_V3][IWL_NUM_BANDS_PER_CHAIN_V2];
+	__le32 table_revision;
+} __packed; /* PER_CHAIN_LIMIT_OFFSET_CMD_VER_5 */
+
+union iwl_geo_tx_power_profiles_cmd {
+	struct iwl_geo_tx_power_profiles_cmd_v1 v1;
+	struct iwl_geo_tx_power_profiles_cmd_v2 v2;
+	struct iwl_geo_tx_power_profiles_cmd_v3 v3;
+	struct iwl_geo_tx_power_profiles_cmd_v4 v4;
+	struct iwl_geo_tx_power_profiles_cmd_v5 v5;
+};
+
+/**
+ * struct iwl_geo_tx_power_profiles_resp -  response to PER_CHAIN_LIMIT_OFFSET_CMD cmd
+ * @profile_idx: current geo profile in use
+ */
+struct iwl_geo_tx_power_profiles_resp {
+	__le32 profile_idx;
+} __packed; /* PER_CHAIN_LIMIT_OFFSET_RSP */
+
+/**
+ * union iwl_ppag_table_cmd - union for all versions of PPAG command
+ * @v1: version 1
+ * @v2: version 2
+ *
+ * @flags: bit 0 - indicates enablement of PPAG for ETSI
+ *         bit 1 - indicates enablement of PPAG for CHINA BIOS
+ *         bit 1 can be used only in v3 (identical to v2)
+ * @gain: table of antenna gain values per chain and sub-band
+ * @reserved: reserved
+ */
+union iwl_ppag_table_cmd {
+	struct {
+		__le32 flags;
+		s8 gain[IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V1];
+		s8 reserved[2];
+	} v1;
+	struct {
+		__le32 flags;
+		s8 gain[IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V2];
+		s8 reserved[2];
+	} v2;
+} __packed;
+
+#define MCC_TO_SAR_OFFSET_TABLE_ROW_SIZE	26
+#define MCC_TO_SAR_OFFSET_TABLE_COL_SIZE	13
+
+/**
+ * struct iwl_sar_offset_mapping_cmd - struct for SAR_OFFSET_MAPPING_TABLE_CMD
+ * @offset_map: mapping a mcc to a geo sar group
+ * @reserved: reserved
+ */
+struct iwl_sar_offset_mapping_cmd {
+	u8 offset_map[MCC_TO_SAR_OFFSET_TABLE_ROW_SIZE]
+		[MCC_TO_SAR_OFFSET_TABLE_COL_SIZE];
+	u16 reserved;
+} __packed; /*SAR_OFFSET_MAPPING_TABLE_CMD_API_S*/
+
+/**
+ * struct iwl_beacon_filter_cmd
+ * REPLY_BEACON_FILTERING_CMD = 0xd2 (command)
+ * @bf_energy_delta: Used for RSSI filtering, if in 'normal' state. Send beacon
+ *      to driver if delta in Energy values calculated for this and last
+ *      passed beacon is greater than this threshold. Zero value means that
+ *      the Energy change is ignored for beacon filtering, and beacon will
+ *      not be forced to be sent to driver regardless of this delta. Typical
+ *      energy delta 5dB.
+ * @bf_roaming_energy_delta: Used for RSSI filtering, if in 'roaming' state.
+ *      Send beacon to driver if delta in Energy values calculated for this
+ *      and last passed beacon is greater than this threshold. Zero value
+ *      means that the Energy change is ignored for beacon filtering while in
+ *      Roaming state, typical energy delta 1dB.
+ * @bf_roaming_state: Used for RSSI filtering. If absolute Energy values
+ *      calculated for current beacon is less than the threshold, use
+ *      Roaming Energy Delta Threshold, otherwise use normal Energy Delta
+ *      Threshold. Typical energy threshold is -72dBm.
+ * @bf_temp_threshold: This threshold determines the type of temperature
+ *	filtering (Slow or Fast) that is selected (Units are in Celsuis):
+ *	If the current temperature is above this threshold - Fast filter
+ *	will be used, If the current temperature is below this threshold -
+ *	Slow filter will be used.
+ * @bf_temp_fast_filter: Send Beacon to driver if delta in temperature values
+ *      calculated for this and the last passed beacon is greater than this
+ *      threshold. Zero value means that the temperature change is ignored for
+ *      beacon filtering; beacons will not be  forced to be sent to driver
+ *      regardless of whether its temerature has been changed.
+ * @bf_temp_slow_filter: Send Beacon to driver if delta in temperature values
+ *      calculated for this and the last passed beacon is greater than this
+ *      threshold. Zero value means that the temperature change is ignored for
+ *      beacon filtering; beacons will not be forced to be sent to driver
+ *      regardless of whether its temerature has been changed.
+ * @bf_enable_beacon_filter: 1, beacon filtering is enabled; 0, disabled.
+ * @bf_debug_flag: beacon filtering debug configuration
+ * @bf_escape_timer: Send beacons to to driver if no beacons were passed
+ *      for a specific period of time. Units: Beacons.
+ * @ba_escape_timer: Fully receive and parse beacon if no beacons were passed
+ *      for a longer period of time then this escape-timeout. Units: Beacons.
+ * @ba_enable_beacon_abort: 1, beacon abort is enabled; 0, disabled.
+ * @bf_threshold_absolute_low: See below.
+ * @bf_threshold_absolute_high: Send Beacon to driver if Energy value calculated
+ *      for this beacon crossed this absolute threshold. For the 'Increase'
+ *      direction the bf_energy_absolute_low[i] is used. For the 'Decrease'
+ *      direction the bf_energy_absolute_high[i] is used. Zero value means
+ *      that this specific threshold is ignored for beacon filtering, and
+ *      beacon will not be forced to be sent to driver due to this setting.
+ */
+struct iwl_beacon_filter_cmd {
+	__le32 bf_energy_delta;
+	__le32 bf_roaming_energy_delta;
+	__le32 bf_roaming_state;
+	__le32 bf_temp_threshold;
+	__le32 bf_temp_fast_filter;
+	__le32 bf_temp_slow_filter;
+	__le32 bf_enable_beacon_filter;
+	__le32 bf_debug_flag;
+	__le32 bf_escape_timer;
+	__le32 ba_escape_timer;
+	__le32 ba_enable_beacon_abort;
+	__le32 bf_threshold_absolute_low[2];
+	__le32 bf_threshold_absolute_high[2];
+} __packed; /* BEACON_FILTER_CONFIG_API_S_VER_4 */
+
+/* Beacon filtering and beacon abort */
+#define IWL_BF_ENERGY_DELTA_DEFAULT 5
+#define IWL_BF_ENERGY_DELTA_D0I3 20
+#define IWL_BF_ENERGY_DELTA_MAX 255
+#define IWL_BF_ENERGY_DELTA_MIN 0
+
+#define IWL_BF_ROAMING_ENERGY_DELTA_DEFAULT 1
+#define IWL_BF_ROAMING_ENERGY_DELTA_D0I3 20
+#define IWL_BF_ROAMING_ENERGY_DELTA_MAX 255
+#define IWL_BF_ROAMING_ENERGY_DELTA_MIN 0
+
+#define IWL_BF_ROAMING_STATE_DEFAULT 72
+#define IWL_BF_ROAMING_STATE_D0I3 72
+#define IWL_BF_ROAMING_STATE_MAX 255
+#define IWL_BF_ROAMING_STATE_MIN 0
+
+#define IWL_BF_TEMP_THRESHOLD_DEFAULT 112
+#define IWL_BF_TEMP_THRESHOLD_D0I3 112
+#define IWL_BF_TEMP_THRESHOLD_MAX 255
+#define IWL_BF_TEMP_THRESHOLD_MIN 0
+
+#define IWL_BF_TEMP_FAST_FILTER_DEFAULT 1
+#define IWL_BF_TEMP_FAST_FILTER_D0I3 1
+#define IWL_BF_TEMP_FAST_FILTER_MAX 255
+#define IWL_BF_TEMP_FAST_FILTER_MIN 0
+
+#define IWL_BF_TEMP_SLOW_FILTER_DEFAULT 5
+#define IWL_BF_TEMP_SLOW_FILTER_D0I3 20
+#define IWL_BF_TEMP_SLOW_FILTER_MAX 255
+#define IWL_BF_TEMP_SLOW_FILTER_MIN 0
+
+#define IWL_BF_ENABLE_BEACON_FILTER_DEFAULT 1
+
+#define IWL_BF_DEBUG_FLAG_DEFAULT 0
+#define IWL_BF_DEBUG_FLAG_D0I3 0
+
+#define IWL_BF_ESCAPE_TIMER_DEFAULT 0
+#define IWL_BF_ESCAPE_TIMER_D0I3 0
+#define IWL_BF_ESCAPE_TIMER_MAX 1024
+#define IWL_BF_ESCAPE_TIMER_MIN 0
+
+#define IWL_BA_ESCAPE_TIMER_DEFAULT 6
+#define IWL_BA_ESCAPE_TIMER_D0I3 6
+#define IWL_BA_ESCAPE_TIMER_D3 9
+#define IWL_BA_ESCAPE_TIMER_MAX 1024
+#define IWL_BA_ESCAPE_TIMER_MIN 0
+
+#define IWL_BA_ENABLE_BEACON_ABORT_DEFAULT 1
+
+#define IWL_BF_CMD_CONFIG(mode)					     \
+	.bf_energy_delta = cpu_to_le32(IWL_BF_ENERGY_DELTA ## mode),	      \
+	.bf_roaming_energy_delta =					      \
+		cpu_to_le32(IWL_BF_ROAMING_ENERGY_DELTA ## mode),	      \
+	.bf_roaming_state = cpu_to_le32(IWL_BF_ROAMING_STATE ## mode),	      \
+	.bf_temp_threshold = cpu_to_le32(IWL_BF_TEMP_THRESHOLD ## mode),      \
+	.bf_temp_fast_filter = cpu_to_le32(IWL_BF_TEMP_FAST_FILTER ## mode),  \
+	.bf_temp_slow_filter = cpu_to_le32(IWL_BF_TEMP_SLOW_FILTER ## mode),  \
+	.bf_debug_flag = cpu_to_le32(IWL_BF_DEBUG_FLAG ## mode),	      \
+	.bf_escape_timer = cpu_to_le32(IWL_BF_ESCAPE_TIMER ## mode),	      \
+	.ba_escape_timer = cpu_to_le32(IWL_BA_ESCAPE_TIMER ## mode)
+
+#define IWL_BF_CMD_CONFIG_DEFAULTS IWL_BF_CMD_CONFIG(_DEFAULT)
+#define IWL_BF_CMD_CONFIG_D0I3 IWL_BF_CMD_CONFIG(_D0I3)
+#endif /* __iwl_fw_api_power_h__ */