Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1249 insertions, 0 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/scan.h b/drivers/net/wireless/intel/iwlwifi/fw/api/scan.h
new file mode 100644
index 000000000..7ba0e3409
--- /dev/null
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api/scan.h
@@ -0,0 +1,1249 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
+/*
+ * Copyright (C) 2012-2014, 2018-2022 Intel Corporation
+ * Copyright (C) 2013-2015 Intel Mobile Communications GmbH
+ * Copyright (C) 2016-2017 Intel Deutschland GmbH
+ */
+#ifndef __iwl_fw_api_scan_h__
+#define __iwl_fw_api_scan_h__
+
+/* Scan Commands, Responses, Notifications */
+
+/**
+ * enum iwl_scan_subcmd_ids - scan commands
+ */
+enum iwl_scan_subcmd_ids {
+	/**
+	 * @OFFLOAD_MATCH_INFO_NOTIF: &struct iwl_scan_offload_match_info
+	 */
+	OFFLOAD_MATCH_INFO_NOTIF = 0xFC,
+};
+
+/* Max number of IEs for direct SSID scans in a command */
+#define PROBE_OPTION_MAX		20
+
+#define SCAN_SHORT_SSID_MAX_SIZE        8
+#define SCAN_BSSID_MAX_SIZE             16
+
+/**
+ * struct iwl_ssid_ie - directed scan network information element
+ *
+ * Up to 20 of these may appear in REPLY_SCAN_CMD,
+ * selected by "type" bit field in struct iwl_scan_channel;
+ * each channel may select different ssids from among the 20 entries.
+ * SSID IEs get transmitted in reverse order of entry.
+ *
+ * @id: element ID
+ * @len: element length
+ * @ssid: element (SSID) data
+ */
+struct iwl_ssid_ie {
+	u8 id;
+	u8 len;
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+} __packed; /* SCAN_DIRECT_SSID_IE_API_S_VER_1 */
+
+/* scan offload */
+#define IWL_SCAN_MAX_BLACKLIST_LEN	64
+#define IWL_SCAN_SHORT_BLACKLIST_LEN	16
+#define IWL_SCAN_MAX_PROFILES		11
+#define IWL_SCAN_MAX_PROFILES_V2	8
+#define SCAN_OFFLOAD_PROBE_REQ_SIZE	512
+#define SCAN_NUM_BAND_PROBE_DATA_V_1	2
+#define SCAN_NUM_BAND_PROBE_DATA_V_2	3
+
+/* Default watchdog (in MS) for scheduled scan iteration */
+#define IWL_SCHED_SCAN_WATCHDOG cpu_to_le16(15000)
+
+#define IWL_GOOD_CRC_TH_DEFAULT cpu_to_le16(1)
+#define CAN_ABORT_STATUS 1
+
+#define IWL_FULL_SCAN_MULTIPLIER 5
+#define IWL_FAST_SCHED_SCAN_ITERATIONS 3
+#define IWL_MAX_SCHED_SCAN_PLANS 2
+
+enum scan_framework_client {
+	SCAN_CLIENT_SCHED_SCAN		= BIT(0),
+	SCAN_CLIENT_NETDETECT		= BIT(1),
+	SCAN_CLIENT_ASSET_TRACKING	= BIT(2),
+};
+
+/**
+ * struct iwl_scan_offload_blocklist - SCAN_OFFLOAD_BLACKLIST_S
+ * @ssid:		MAC address to filter out
+ * @reported_rssi:	AP rssi reported to the host
+ * @client_bitmap: clients ignore this entry  - enum scan_framework_client
+ */
+struct iwl_scan_offload_blocklist {
+	u8 ssid[ETH_ALEN];
+	u8 reported_rssi;
+	u8 client_bitmap;
+} __packed;
+
+enum iwl_scan_offload_network_type {
+	IWL_NETWORK_TYPE_BSS	= 1,
+	IWL_NETWORK_TYPE_IBSS	= 2,
+	IWL_NETWORK_TYPE_ANY	= 3,
+};
+
+enum iwl_scan_offload_band_selection {
+	IWL_SCAN_OFFLOAD_SELECT_2_4	= 0x4,
+	IWL_SCAN_OFFLOAD_SELECT_5_2	= 0x8,
+	IWL_SCAN_OFFLOAD_SELECT_ANY	= 0xc,
+};
+
+enum iwl_scan_offload_auth_alg {
+	IWL_AUTH_ALGO_UNSUPPORTED  = 0x00,
+	IWL_AUTH_ALGO_NONE         = 0x01,
+	IWL_AUTH_ALGO_PSK          = 0x02,
+	IWL_AUTH_ALGO_8021X        = 0x04,
+	IWL_AUTH_ALGO_SAE          = 0x08,
+	IWL_AUTH_ALGO_8021X_SHA384 = 0x10,
+	IWL_AUTH_ALGO_OWE          = 0x20,
+};
+
+/**
+ * struct iwl_scan_offload_profile - SCAN_OFFLOAD_PROFILE_S
+ * @ssid_index:		index to ssid list in fixed part
+ * @unicast_cipher:	encryption algorithm to match - bitmap
+ * @auth_alg:		authentication algorithm to match - bitmap
+ * @network_type:	enum iwl_scan_offload_network_type
+ * @band_selection:	enum iwl_scan_offload_band_selection
+ * @client_bitmap:	clients waiting for match - enum scan_framework_client
+ * @reserved:		reserved
+ */
+struct iwl_scan_offload_profile {
+	u8 ssid_index;
+	u8 unicast_cipher;
+	u8 auth_alg;
+	u8 network_type;
+	u8 band_selection;
+	u8 client_bitmap;
+	u8 reserved[2];
+} __packed;
+
+/**
+ * struct iwl_scan_offload_profile_cfg_data
+ * @blocklist_len:	length of blocklist
+ * @num_profiles:	num of profiles in the list
+ * @match_notify:	clients waiting for match found notification
+ * @pass_match:		clients waiting for the results
+ * @active_clients:	active clients bitmap - enum scan_framework_client
+ * @any_beacon_notify:	clients waiting for match notification without match
+ * @reserved:		reserved
+ */
+struct iwl_scan_offload_profile_cfg_data {
+	u8 blocklist_len;
+	u8 num_profiles;
+	u8 match_notify;
+	u8 pass_match;
+	u8 active_clients;
+	u8 any_beacon_notify;
+	u8 reserved[2];
+} __packed;
+
+/**
+ * struct iwl_scan_offload_profile_cfg
+ * @profiles:	profiles to search for match
+ * @data:	the rest of the data for profile_cfg
+ */
+struct iwl_scan_offload_profile_cfg_v1 {
+	struct iwl_scan_offload_profile profiles[IWL_SCAN_MAX_PROFILES];
+	struct iwl_scan_offload_profile_cfg_data data;
+} __packed; /* SCAN_OFFLOAD_PROFILES_CFG_API_S_VER_1-2*/
+
+/**
+ * struct iwl_scan_offload_profile_cfg
+ * @profiles:	profiles to search for match
+ * @data:	the rest of the data for profile_cfg
+ */
+struct iwl_scan_offload_profile_cfg {
+	struct iwl_scan_offload_profile profiles[IWL_SCAN_MAX_PROFILES_V2];
+	struct iwl_scan_offload_profile_cfg_data data;
+} __packed; /* SCAN_OFFLOAD_PROFILES_CFG_API_S_VER_3*/
+
+/**
+ * struct iwl_scan_schedule_lmac - schedule of scan offload
+ * @delay:		delay between iterations, in seconds.
+ * @iterations:		num of scan iterations
+ * @full_scan_mul:	number of partial scans before each full scan
+ */
+struct iwl_scan_schedule_lmac {
+	__le16 delay;
+	u8 iterations;
+	u8 full_scan_mul;
+} __packed; /* SCAN_SCHEDULE_API_S */
+
+enum iwl_scan_offload_complete_status {
+	IWL_SCAN_OFFLOAD_COMPLETED	= 1,
+	IWL_SCAN_OFFLOAD_ABORTED	= 2,
+};
+
+enum iwl_scan_ebs_status {
+	IWL_SCAN_EBS_SUCCESS,
+	IWL_SCAN_EBS_FAILED,
+	IWL_SCAN_EBS_CHAN_NOT_FOUND,
+	IWL_SCAN_EBS_INACTIVE,
+};
+
+/**
+ * struct iwl_scan_req_tx_cmd - SCAN_REQ_TX_CMD_API_S
+ * @tx_flags: combination of TX_CMD_FLG_*
+ * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
+ *	cleared. Combination of RATE_MCS_*
+ * @sta_id: index of destination station in FW station table
+ * @reserved: for alignment and future use
+ */
+struct iwl_scan_req_tx_cmd {
+	__le32 tx_flags;
+	__le32 rate_n_flags;
+	u8 sta_id;
+	u8 reserved[3];
+} __packed;
+
+enum iwl_scan_channel_flags_lmac {
+	IWL_UNIFIED_SCAN_CHANNEL_FULL		= BIT(27),
+	IWL_UNIFIED_SCAN_CHANNEL_PARTIAL	= BIT(28),
+};
+
+/**
+ * struct iwl_scan_channel_cfg_lmac - SCAN_CHANNEL_CFG_S_VER2
+ * @flags:		bits 1-20: directed scan to i'th ssid
+ *			other bits &enum iwl_scan_channel_flags_lmac
+ * @channel_num:	channel number 1-13 etc
+ * @iter_count:		scan iteration on this channel
+ * @iter_interval:	interval in seconds between iterations on one channel
+ */
+struct iwl_scan_channel_cfg_lmac {
+	__le32 flags;
+	__le16 channel_num;
+	__le16 iter_count;
+	__le32 iter_interval;
+} __packed;
+
+/**
+ * struct iwl_scan_probe_segment - PROBE_SEGMENT_API_S_VER_1
+ * @offset: offset in the data block
+ * @len: length of the segment
+ */
+struct iwl_scan_probe_segment {
+	__le16 offset;
+	__le16 len;
+} __packed;
+
+/**
+ * struct iwl_scan_probe_req_v1 - PROBE_REQUEST_FRAME_API_S_VER_2
+ * @mac_header: first (and common) part of the probe
+ * @band_data: band specific data
+ * @common_data: last (and common) part of the probe
+ * @buf: raw data block
+ */
+struct iwl_scan_probe_req_v1 {
+	struct iwl_scan_probe_segment mac_header;
+	struct iwl_scan_probe_segment band_data[SCAN_NUM_BAND_PROBE_DATA_V_1];
+	struct iwl_scan_probe_segment common_data;
+	u8 buf[SCAN_OFFLOAD_PROBE_REQ_SIZE];
+} __packed;
+
+/**
+ * struct iwl_scan_probe_req - PROBE_REQUEST_FRAME_API_S_VER_v2
+ * @mac_header: first (and common) part of the probe
+ * @band_data: band specific data
+ * @common_data: last (and common) part of the probe
+ * @buf: raw data block
+ */
+struct iwl_scan_probe_req {
+	struct iwl_scan_probe_segment mac_header;
+	struct iwl_scan_probe_segment band_data[SCAN_NUM_BAND_PROBE_DATA_V_2];
+	struct iwl_scan_probe_segment common_data;
+	u8 buf[SCAN_OFFLOAD_PROBE_REQ_SIZE];
+} __packed;
+
+enum iwl_scan_channel_flags {
+	IWL_SCAN_CHANNEL_FLAG_EBS		= BIT(0),
+	IWL_SCAN_CHANNEL_FLAG_EBS_ACCURATE	= BIT(1),
+	IWL_SCAN_CHANNEL_FLAG_CACHE_ADD		= BIT(2),
+	IWL_SCAN_CHANNEL_FLAG_EBS_FRAG		= BIT(3),
+	IWL_SCAN_CHANNEL_FLAG_FORCE_EBS         = BIT(4),
+	IWL_SCAN_CHANNEL_FLAG_ENABLE_CHAN_ORDER = BIT(5),
+	IWL_SCAN_CHANNEL_FLAG_6G_PSC_NO_FILTER  = BIT(6),
+};
+
+/**
+ * struct iwl_scan_channel_opt - CHANNEL_OPTIMIZATION_API_S
+ * @flags: enum iwl_scan_channel_flags
+ * @non_ebs_ratio: defines the ratio of number of scan iterations where EBS is
+ *	involved.
+ *	1 - EBS is disabled.
+ *	2 - every second scan will be full scan(and so on).
+ */
+struct iwl_scan_channel_opt {
+	__le16 flags;
+	__le16 non_ebs_ratio;
+} __packed;
+
+/**
+ * enum iwl_mvm_lmac_scan_flags - LMAC scan flags
+ * @IWL_MVM_LMAC_SCAN_FLAG_PASS_ALL: pass all beacons and probe responses
+ *	without filtering.
+ * @IWL_MVM_LMAC_SCAN_FLAG_PASSIVE: force passive scan on all channels
+ * @IWL_MVM_LMAC_SCAN_FLAG_PRE_CONNECTION: single channel scan
+ * @IWL_MVM_LMAC_SCAN_FLAG_ITER_COMPLETE: send iteration complete notification
+ * @IWL_MVM_LMAC_SCAN_FLAG_MULTIPLE_SSIDS: multiple SSID matching
+ * @IWL_MVM_LMAC_SCAN_FLAG_FRAGMENTED: all passive scans will be fragmented
+ * @IWL_MVM_LMAC_SCAN_FLAGS_RRM_ENABLED: insert WFA vendor-specific TPC report
+ *	and DS parameter set IEs into probe requests.
+ * @IWL_MVM_LMAC_SCAN_FLAG_EXTENDED_DWELL: use extended dwell time on channels
+ *	1, 6 and 11.
+ * @IWL_MVM_LMAC_SCAN_FLAG_MATCH: Send match found notification on matches
+ */
+enum iwl_mvm_lmac_scan_flags {
+	IWL_MVM_LMAC_SCAN_FLAG_PASS_ALL		= BIT(0),
+	IWL_MVM_LMAC_SCAN_FLAG_PASSIVE		= BIT(1),
+	IWL_MVM_LMAC_SCAN_FLAG_PRE_CONNECTION	= BIT(2),
+	IWL_MVM_LMAC_SCAN_FLAG_ITER_COMPLETE	= BIT(3),
+	IWL_MVM_LMAC_SCAN_FLAG_MULTIPLE_SSIDS	= BIT(4),
+	IWL_MVM_LMAC_SCAN_FLAG_FRAGMENTED	= BIT(5),
+	IWL_MVM_LMAC_SCAN_FLAGS_RRM_ENABLED	= BIT(6),
+	IWL_MVM_LMAC_SCAN_FLAG_EXTENDED_DWELL	= BIT(7),
+	IWL_MVM_LMAC_SCAN_FLAG_MATCH		= BIT(9),
+};
+
+enum iwl_scan_priority {
+	IWL_SCAN_PRIORITY_LOW,
+	IWL_SCAN_PRIORITY_MEDIUM,
+	IWL_SCAN_PRIORITY_HIGH,
+};
+
+enum iwl_scan_priority_ext {
+	IWL_SCAN_PRIORITY_EXT_0_LOWEST,
+	IWL_SCAN_PRIORITY_EXT_1,
+	IWL_SCAN_PRIORITY_EXT_2,
+	IWL_SCAN_PRIORITY_EXT_3,
+	IWL_SCAN_PRIORITY_EXT_4,
+	IWL_SCAN_PRIORITY_EXT_5,
+	IWL_SCAN_PRIORITY_EXT_6,
+	IWL_SCAN_PRIORITY_EXT_7_HIGHEST,
+};
+
+/**
+ * struct iwl_scan_req_lmac - SCAN_REQUEST_CMD_API_S_VER_1
+ * @reserved1: for alignment and future use
+ * @n_channels: num of channels to scan
+ * @active_dwell: dwell time for active channels
+ * @passive_dwell: dwell time for passive channels
+ * @fragmented_dwell: dwell time for fragmented passive scan
+ * @extended_dwell: dwell time for channels 1, 6 and 11 (in certain cases)
+ * @reserved2: for alignment and future use
+ * @rx_chain_select: PHY_RX_CHAIN_* flags
+ * @scan_flags: &enum iwl_mvm_lmac_scan_flags
+ * @max_out_time: max time (in TU) to be out of associated channel
+ * @suspend_time: pause scan this long (TUs) when returning to service channel
+ * @flags: RXON flags
+ * @filter_flags: RXON filter
+ * @tx_cmd: tx command for active scan; for 2GHz and for 5GHz
+ * @direct_scan: list of SSIDs for directed active scan
+ * @scan_prio: enum iwl_scan_priority
+ * @iter_num: number of scan iterations
+ * @delay: delay in seconds before first iteration
+ * @schedule: two scheduling plans. The first one is finite, the second one can
+ *	be infinite.
+ * @channel_opt: channel optimization options, for full and partial scan
+ * @data: channel configuration and probe request packet.
+ */
+struct iwl_scan_req_lmac {
+	/* SCAN_REQUEST_FIXED_PART_API_S_VER_7 */
+	__le32 reserved1;
+	u8 n_channels;
+	u8 active_dwell;
+	u8 passive_dwell;
+	u8 fragmented_dwell;
+	u8 extended_dwell;
+	u8 reserved2;
+	__le16 rx_chain_select;
+	__le32 scan_flags;
+	__le32 max_out_time;
+	__le32 suspend_time;
+	/* RX_ON_FLAGS_API_S_VER_1 */
+	__le32 flags;
+	__le32 filter_flags;
+	struct iwl_scan_req_tx_cmd tx_cmd[2];
+	struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX];
+	__le32 scan_prio;
+	/* SCAN_REQ_PERIODIC_PARAMS_API_S */
+	__le32 iter_num;
+	__le32 delay;
+	struct iwl_scan_schedule_lmac schedule[IWL_MAX_SCHED_SCAN_PLANS];
+	struct iwl_scan_channel_opt channel_opt[2];
+	u8 data[];
+} __packed;
+
+/**
+ * struct iwl_scan_results_notif - scan results for one channel -
+ *	SCAN_RESULT_NTF_API_S_VER_3
+ * @channel: which channel the results are from
+ * @band: 0 for 5.2 GHz, 1 for 2.4 GHz
+ * @probe_status: SCAN_PROBE_STATUS_*, indicates success of probe request
+ * @num_probe_not_sent: # of request that weren't sent due to not enough time
+ * @duration: duration spent in channel, in usecs
+ */
+struct iwl_scan_results_notif {
+	u8 channel;
+	u8 band;
+	u8 probe_status;
+	u8 num_probe_not_sent;
+	__le32 duration;
+} __packed;
+
+/**
+ * struct iwl_lmac_scan_complete_notif - notifies end of scanning (all channels)
+ *	SCAN_COMPLETE_NTF_API_S_VER_3
+ * @scanned_channels: number of channels scanned (and number of valid results)
+ * @status: one of SCAN_COMP_STATUS_*
+ * @bt_status: BT on/off status
+ * @last_channel: last channel that was scanned
+ * @tsf_low: TSF timer (lower half) in usecs
+ * @tsf_high: TSF timer (higher half) in usecs
+ * @results: an array of scan results, only "scanned_channels" of them are valid
+ */
+struct iwl_lmac_scan_complete_notif {
+	u8 scanned_channels;
+	u8 status;
+	u8 bt_status;
+	u8 last_channel;
+	__le32 tsf_low;
+	__le32 tsf_high;
+	struct iwl_scan_results_notif results[];
+} __packed;
+
+/**
+ * struct iwl_scan_offload_complete - PERIODIC_SCAN_COMPLETE_NTF_API_S_VER_2
+ * @last_schedule_line: last schedule line executed (fast or regular)
+ * @last_schedule_iteration: last scan iteration executed before scan abort
+ * @status: &enum iwl_scan_offload_complete_status
+ * @ebs_status: EBS success status &enum iwl_scan_ebs_status
+ * @time_after_last_iter: time in seconds elapsed after last iteration
+ * @reserved: reserved
+ */
+struct iwl_periodic_scan_complete {
+	u8 last_schedule_line;
+	u8 last_schedule_iteration;
+	u8 status;
+	u8 ebs_status;
+	__le32 time_after_last_iter;
+	__le32 reserved;
+} __packed;
+
+/* UMAC Scan API */
+
+/* The maximum of either of these cannot exceed 8, because we use an
+ * 8-bit mask (see IWL_MVM_SCAN_MASK in mvm.h).
+ */
+#define IWL_MVM_MAX_UMAC_SCANS 4
+#define IWL_MVM_MAX_LMAC_SCANS 1
+
+enum scan_config_flags {
+	SCAN_CONFIG_FLAG_ACTIVATE			= BIT(0),
+	SCAN_CONFIG_FLAG_DEACTIVATE			= BIT(1),
+	SCAN_CONFIG_FLAG_FORBID_CHUB_REQS		= BIT(2),
+	SCAN_CONFIG_FLAG_ALLOW_CHUB_REQS		= BIT(3),
+	SCAN_CONFIG_FLAG_SET_TX_CHAINS			= BIT(8),
+	SCAN_CONFIG_FLAG_SET_RX_CHAINS			= BIT(9),
+	SCAN_CONFIG_FLAG_SET_AUX_STA_ID			= BIT(10),
+	SCAN_CONFIG_FLAG_SET_ALL_TIMES			= BIT(11),
+	SCAN_CONFIG_FLAG_SET_EFFECTIVE_TIMES		= BIT(12),
+	SCAN_CONFIG_FLAG_SET_CHANNEL_FLAGS		= BIT(13),
+	SCAN_CONFIG_FLAG_SET_LEGACY_RATES		= BIT(14),
+	SCAN_CONFIG_FLAG_SET_MAC_ADDR			= BIT(15),
+	SCAN_CONFIG_FLAG_SET_FRAGMENTED			= BIT(16),
+	SCAN_CONFIG_FLAG_CLEAR_FRAGMENTED		= BIT(17),
+	SCAN_CONFIG_FLAG_SET_CAM_MODE			= BIT(18),
+	SCAN_CONFIG_FLAG_CLEAR_CAM_MODE			= BIT(19),
+	SCAN_CONFIG_FLAG_SET_PROMISC_MODE		= BIT(20),
+	SCAN_CONFIG_FLAG_CLEAR_PROMISC_MODE		= BIT(21),
+	SCAN_CONFIG_FLAG_SET_LMAC2_FRAGMENTED		= BIT(22),
+	SCAN_CONFIG_FLAG_CLEAR_LMAC2_FRAGMENTED		= BIT(23),
+
+	/* Bits 26-31 are for num of channels in channel_array */
+#define SCAN_CONFIG_N_CHANNELS(n) ((n) << 26)
+};
+
+enum scan_config_rates {
+	/* OFDM basic rates */
+	SCAN_CONFIG_RATE_6M	= BIT(0),
+	SCAN_CONFIG_RATE_9M	= BIT(1),
+	SCAN_CONFIG_RATE_12M	= BIT(2),
+	SCAN_CONFIG_RATE_18M	= BIT(3),
+	SCAN_CONFIG_RATE_24M	= BIT(4),
+	SCAN_CONFIG_RATE_36M	= BIT(5),
+	SCAN_CONFIG_RATE_48M	= BIT(6),
+	SCAN_CONFIG_RATE_54M	= BIT(7),
+	/* CCK basic rates */
+	SCAN_CONFIG_RATE_1M	= BIT(8),
+	SCAN_CONFIG_RATE_2M	= BIT(9),
+	SCAN_CONFIG_RATE_5M	= BIT(10),
+	SCAN_CONFIG_RATE_11M	= BIT(11),
+
+	/* Bits 16-27 are for supported rates */
+#define SCAN_CONFIG_SUPPORTED_RATE(rate)	((rate) << 16)
+};
+
+enum iwl_channel_flags {
+	IWL_CHANNEL_FLAG_EBS				= BIT(0),
+	IWL_CHANNEL_FLAG_ACCURATE_EBS			= BIT(1),
+	IWL_CHANNEL_FLAG_EBS_ADD			= BIT(2),
+	IWL_CHANNEL_FLAG_PRE_SCAN_PASSIVE2ACTIVE	= BIT(3),
+};
+
+enum iwl_uhb_chan_cfg_flags {
+	IWL_UHB_CHAN_CFG_FLAG_UNSOLICITED_PROBE_RES = BIT(24),
+	IWL_UHB_CHAN_CFG_FLAG_PSC_CHAN_NO_LISTEN    = BIT(25),
+	IWL_UHB_CHAN_CFG_FLAG_FORCE_PASSIVE         = BIT(26),
+};
+/**
+ * struct iwl_scan_dwell
+ * @active:		default dwell time for active scan
+ * @passive:		default dwell time for passive scan
+ * @fragmented:		default dwell time for fragmented scan
+ * @extended:		default dwell time for channels 1, 6 and 11
+ */
+struct iwl_scan_dwell {
+	u8 active;
+	u8 passive;
+	u8 fragmented;
+	u8 extended;
+} __packed;
+
+/**
+ * struct iwl_scan_config_v1 - scan configuration command
+ * @flags:			enum scan_config_flags
+ * @tx_chains:			valid_tx antenna - ANT_* definitions
+ * @rx_chains:			valid_rx antenna - ANT_* definitions
+ * @legacy_rates:		default legacy rates - enum scan_config_rates
+ * @out_of_channel_time:	default max out of serving channel time
+ * @suspend_time:		default max suspend time
+ * @dwell:			dwells for the scan
+ * @mac_addr:			default mac address to be used in probes
+ * @bcast_sta_id:		the index of the station in the fw
+ * @channel_flags:		default channel flags - enum iwl_channel_flags
+ *				scan_config_channel_flag
+ * @channel_array:		default supported channels
+ */
+struct iwl_scan_config_v1 {
+	__le32 flags;
+	__le32 tx_chains;
+	__le32 rx_chains;
+	__le32 legacy_rates;
+	__le32 out_of_channel_time;
+	__le32 suspend_time;
+	struct iwl_scan_dwell dwell;
+	u8 mac_addr[ETH_ALEN];
+	u8 bcast_sta_id;
+	u8 channel_flags;
+	u8 channel_array[];
+} __packed; /* SCAN_CONFIG_DB_CMD_API_S */
+
+#define SCAN_TWO_LMACS 2
+#define SCAN_LB_LMAC_IDX 0
+#define SCAN_HB_LMAC_IDX 1
+
+/**
+ * struct iwl_scan_config_v2 - scan configuration command
+ * @flags:			enum scan_config_flags
+ * @tx_chains:			valid_tx antenna - ANT_* definitions
+ * @rx_chains:			valid_rx antenna - ANT_* definitions
+ * @legacy_rates:		default legacy rates - enum scan_config_rates
+ * @out_of_channel_time:	default max out of serving channel time
+ * @suspend_time:		default max suspend time
+ * @dwell:			dwells for the scan
+ * @mac_addr:			default mac address to be used in probes
+ * @bcast_sta_id:		the index of the station in the fw
+ * @channel_flags:		default channel flags - enum iwl_channel_flags
+ *				scan_config_channel_flag
+ * @channel_array:		default supported channels
+ */
+struct iwl_scan_config_v2 {
+	__le32 flags;
+	__le32 tx_chains;
+	__le32 rx_chains;
+	__le32 legacy_rates;
+	__le32 out_of_channel_time[SCAN_TWO_LMACS];
+	__le32 suspend_time[SCAN_TWO_LMACS];
+	struct iwl_scan_dwell dwell;
+	u8 mac_addr[ETH_ALEN];
+	u8 bcast_sta_id;
+	u8 channel_flags;
+	u8 channel_array[];
+} __packed; /* SCAN_CONFIG_DB_CMD_API_S_2 */
+
+/**
+ * struct iwl_scan_config - scan configuration command
+ * @enable_cam_mode: whether to enable CAM mode.
+ * @enable_promiscouos_mode: whether to enable promiscouos mode
+ * @bcast_sta_id: the index of the station in the fw. Deprecated starting with
+ *     API version 5.
+ * @reserved: reserved
+ * @tx_chains: valid_tx antenna - ANT_* definitions
+ * @rx_chains: valid_rx antenna - ANT_* definitions
+ */
+struct iwl_scan_config {
+	u8 enable_cam_mode;
+	u8 enable_promiscouos_mode;
+	u8 bcast_sta_id;
+	u8 reserved;
+	__le32 tx_chains;
+	__le32 rx_chains;
+} __packed; /* SCAN_CONFIG_DB_CMD_API_S_5 */
+
+/**
+ * enum iwl_umac_scan_flags - UMAC scan flags
+ * @IWL_UMAC_SCAN_FLAG_PREEMPTIVE: scan process triggered by this scan request
+ *	can be preempted by other scan requests with higher priority.
+ *	The low priority scan will be resumed when the higher proirity scan is
+ *	completed.
+ * @IWL_UMAC_SCAN_FLAG_START_NOTIF: notification will be sent to the driver
+ *	when scan starts.
+ */
+enum iwl_umac_scan_flags {
+	IWL_UMAC_SCAN_FLAG_PREEMPTIVE		= BIT(0),
+	IWL_UMAC_SCAN_FLAG_START_NOTIF		= BIT(1),
+};
+
+enum iwl_umac_scan_uid_offsets {
+	IWL_UMAC_SCAN_UID_TYPE_OFFSET		= 0,
+	IWL_UMAC_SCAN_UID_SEQ_OFFSET		= 8,
+};
+
+enum iwl_umac_scan_general_flags {
+	IWL_UMAC_SCAN_GEN_FLAGS_PERIODIC		= BIT(0),
+	IWL_UMAC_SCAN_GEN_FLAGS_OVER_BT			= BIT(1),
+	IWL_UMAC_SCAN_GEN_FLAGS_PASS_ALL		= BIT(2),
+	IWL_UMAC_SCAN_GEN_FLAGS_PASSIVE			= BIT(3),
+	IWL_UMAC_SCAN_GEN_FLAGS_PRE_CONNECT		= BIT(4),
+	IWL_UMAC_SCAN_GEN_FLAGS_ITER_COMPLETE		= BIT(5),
+	IWL_UMAC_SCAN_GEN_FLAGS_MULTIPLE_SSID		= BIT(6),
+	IWL_UMAC_SCAN_GEN_FLAGS_FRAGMENTED		= BIT(7),
+	IWL_UMAC_SCAN_GEN_FLAGS_RRM_ENABLED		= BIT(8),
+	IWL_UMAC_SCAN_GEN_FLAGS_MATCH			= BIT(9),
+	IWL_UMAC_SCAN_GEN_FLAGS_EXTENDED_DWELL		= BIT(10),
+	/* Extended dwell is obselete when adaptive dwell is used, making this
+	 * bit reusable. Hence, probe request defer is used only when adaptive
+	 * dwell is supported. */
+	IWL_UMAC_SCAN_GEN_FLAGS_PROB_REQ_DEFER_SUPP	= BIT(10),
+	IWL_UMAC_SCAN_GEN_FLAGS_LMAC2_FRAGMENTED	= BIT(11),
+	IWL_UMAC_SCAN_GEN_FLAGS_ADAPTIVE_DWELL		= BIT(13),
+	IWL_UMAC_SCAN_GEN_FLAGS_MAX_CHNL_TIME		= BIT(14),
+	IWL_UMAC_SCAN_GEN_FLAGS_PROB_REQ_HIGH_TX_RATE	= BIT(15),
+};
+
+/**
+ * enum iwl_umac_scan_general_flags2 - UMAC scan general flags #2
+ * @IWL_UMAC_SCAN_GEN_FLAGS2_NOTIF_PER_CHNL: Whether to send a complete
+ *	notification per channel or not.
+ * @IWL_UMAC_SCAN_GEN_FLAGS2_ALLOW_CHNL_REORDER: Whether to allow channel
+ *	reorder optimization or not.
+ */
+enum iwl_umac_scan_general_flags2 {
+	IWL_UMAC_SCAN_GEN_FLAGS2_NOTIF_PER_CHNL		= BIT(0),
+	IWL_UMAC_SCAN_GEN_FLAGS2_ALLOW_CHNL_REORDER	= BIT(1),
+};
+
+/**
+ * enum iwl_umac_scan_general_flags_v2 - UMAC scan general flags version 2
+ *
+ * The FW flags were reordered and hence the driver introduce version 2
+ *
+ * @IWL_UMAC_SCAN_GEN_FLAGS_V2_PERIODIC: periodic or scheduled
+ * @IWL_UMAC_SCAN_GEN_FLAGS_V2_PASS_ALL: pass all probe responses and beacons
+ *                                       during scan iterations
+ * @IWL_UMAC_SCAN_GEN_FLAGS_V2_NTFY_ITER_COMPLETE: send complete notification
+ *      on every iteration instead of only once after the last iteration
+ * @IWL_UMAC_SCAN_GEN_FLAGS_V2_FRAGMENTED_LMAC1: fragmented scan LMAC1
+ * @IWL_UMAC_SCAN_GEN_FLAGS_V2_FRAGMENTED_LMAC2: fragmented scan LMAC2
+ * @IWL_UMAC_SCAN_GEN_FLAGS_V2_MATCH: does this scan check for profile matching
+ * @IWL_UMAC_SCAN_GEN_FLAGS_V2_USE_ALL_RX_CHAINS: use all valid chains for RX
+ * @IWL_UMAC_SCAN_GEN_FLAGS_V2_ADAPTIVE_DWELL: works with adaptive dwell
+ *                                             for active channel
+ * @IWL_UMAC_SCAN_GEN_FLAGS_V2_PREEMPTIVE: can be preempted by other requests
+ * @IWL_UMAC_SCAN_GEN_FLAGS_V2_NTF_START: send notification of scan start
+ * @IWL_UMAC_SCAN_GEN_FLAGS_V2_MULTI_SSID: matching on multiple SSIDs
+ * @IWL_UMAC_SCAN_GEN_FLAGS_V2_FORCE_PASSIVE: all the channels scanned
+ *                                           as passive
+ * @IWL_UMAC_SCAN_GEN_FLAGS_V2_TRIGGER_UHB_SCAN: at the end of 2.4GHz and
+ *		5.2Ghz bands scan, trigger scan on 6GHz band to discover
+ *		the reported collocated APs
+ * @IWL_UMAC_SCAN_GEN_FLAGS_V2_6GHZ_PASSIVE_SCAN: at the end of 2.4GHz and 5GHz
+ *      bands scan, if not APs were discovered, allow scan to conitnue and scan
+ *      6GHz PSC channels in order to discover country information.
+ * @IWL_UMAC_SCAN_GEN_FLAGS_V2_6GHZ_PASSIVE_SCAN_FILTER_IN: in case
+ *      &IWL_UMAC_SCAN_GEN_FLAGS_V2_6GHZ_PASSIVE_SCAN is enabled and scan is
+ *      activated over 6GHz PSC channels, filter in beacons and probe responses.
+ * @IWL_UMAC_SCAN_GEN_FLAGS_V2_OCE: if set, send probe requests in a minimum
+ *      rate of 5.5Mpbs, filter in broadcast probe responses and set the max
+ *      channel time indication field in the FILS request parameters element
+ *      (if included by the driver in the probe request IEs).
+ */
+enum iwl_umac_scan_general_flags_v2 {
+	IWL_UMAC_SCAN_GEN_FLAGS_V2_PERIODIC             = BIT(0),
+	IWL_UMAC_SCAN_GEN_FLAGS_V2_PASS_ALL             = BIT(1),
+	IWL_UMAC_SCAN_GEN_FLAGS_V2_NTFY_ITER_COMPLETE   = BIT(2),
+	IWL_UMAC_SCAN_GEN_FLAGS_V2_FRAGMENTED_LMAC1     = BIT(3),
+	IWL_UMAC_SCAN_GEN_FLAGS_V2_FRAGMENTED_LMAC2     = BIT(4),
+	IWL_UMAC_SCAN_GEN_FLAGS_V2_MATCH                = BIT(5),
+	IWL_UMAC_SCAN_GEN_FLAGS_V2_USE_ALL_RX_CHAINS    = BIT(6),
+	IWL_UMAC_SCAN_GEN_FLAGS_V2_ADAPTIVE_DWELL       = BIT(7),
+	IWL_UMAC_SCAN_GEN_FLAGS_V2_PREEMPTIVE           = BIT(8),
+	IWL_UMAC_SCAN_GEN_FLAGS_V2_NTF_START            = BIT(9),
+	IWL_UMAC_SCAN_GEN_FLAGS_V2_MULTI_SSID           = BIT(10),
+	IWL_UMAC_SCAN_GEN_FLAGS_V2_FORCE_PASSIVE        = BIT(11),
+	IWL_UMAC_SCAN_GEN_FLAGS_V2_TRIGGER_UHB_SCAN     = BIT(12),
+	IWL_UMAC_SCAN_GEN_FLAGS_V2_6GHZ_PASSIVE_SCAN    = BIT(13),
+	IWL_UMAC_SCAN_GEN_FLAGS_V2_6GHZ_PASSIVE_SCAN_FILTER_IN = BIT(14),
+	IWL_UMAC_SCAN_GEN_FLAGS_V2_OCE                  = BIT(15),
+};
+
+/**
+ * enum iwl_umac_scan_general_params_flags2 - UMAC scan general flags2
+ *
+ * @IWL_UMAC_SCAN_GEN_PARAMS_FLAGS2_RESPECT_P2P_GO_LB: scan event scheduling
+ *     should be aware of a P2P GO operation on the 2GHz band.
+ * @IWL_UMAC_SCAN_GEN_PARAMS_FLAGS2_RESPECT_P2P_GO_HB: scan event scheduling
+ *     should be aware of a P2P GO operation on the 5GHz or 6GHz band.
+ */
+enum iwl_umac_scan_general_params_flags2 {
+	IWL_UMAC_SCAN_GEN_PARAMS_FLAGS2_RESPECT_P2P_GO_LB = BIT(0),
+	IWL_UMAC_SCAN_GEN_PARAMS_FLAGS2_RESPECT_P2P_GO_HB = BIT(1),
+};
+
+/**
+ * struct iwl_scan_channel_cfg_umac
+ * @flags:		bitmap - 0-19:	directed scan to i'th ssid.
+ * @channel_num:	channel number 1-13 etc.
+ * @band:		band of channel: 0 for 2GHz, 1 for 5GHz
+ * @iter_count:		repetition count for the channel.
+ * @iter_interval:	interval between two scan iterations on one channel.
+ */
+struct  iwl_scan_channel_cfg_umac {
+	__le32 flags;
+	/* Both versions are of the same size, so use a union without adjusting
+	 * the command size later
+	 */
+	union {
+		struct {
+			u8 channel_num;
+			u8 iter_count;
+			__le16 iter_interval;
+		} v1;  /* SCAN_CHANNEL_CONFIG_API_S_VER_1 */
+		struct {
+			u8 channel_num;
+			u8 band;
+			u8 iter_count;
+			u8 iter_interval;
+		 } v2; /* SCAN_CHANNEL_CONFIG_API_S_VER_2
+			* SCAN_CHANNEL_CONFIG_API_S_VER_3
+			* SCAN_CHANNEL_CONFIG_API_S_VER_4
+			*/
+	};
+} __packed;
+
+/**
+ * struct iwl_scan_umac_schedule
+ * @interval: interval in seconds between scan iterations
+ * @iter_count: num of scan iterations for schedule plan, 0xff for infinite loop
+ * @reserved: for alignment and future use
+ */
+struct iwl_scan_umac_schedule {
+	__le16 interval;
+	u8 iter_count;
+	u8 reserved;
+} __packed; /* SCAN_SCHED_PARAM_API_S_VER_1 */
+
+struct iwl_scan_req_umac_tail_v1 {
+	/* SCAN_PERIODIC_PARAMS_API_S_VER_1 */
+	struct iwl_scan_umac_schedule schedule[IWL_MAX_SCHED_SCAN_PLANS];
+	__le16 delay;
+	__le16 reserved;
+	/* SCAN_PROBE_PARAMS_API_S_VER_1 */
+	struct iwl_scan_probe_req_v1 preq;
+	struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX];
+} __packed;
+
+/**
+ * struct iwl_scan_req_umac_tail - the rest of the UMAC scan request command
+ *      parameters following channels configuration array.
+ * @schedule: two scheduling plans.
+ * @delay: delay in TUs before starting the first scan iteration
+ * @reserved: for future use and alignment
+ * @preq: probe request with IEs blocks
+ * @direct_scan: list of SSIDs for directed active scan
+ */
+struct iwl_scan_req_umac_tail_v2 {
+	/* SCAN_PERIODIC_PARAMS_API_S_VER_1 */
+	struct iwl_scan_umac_schedule schedule[IWL_MAX_SCHED_SCAN_PLANS];
+	__le16 delay;
+	__le16 reserved;
+	/* SCAN_PROBE_PARAMS_API_S_VER_2 */
+	struct iwl_scan_probe_req preq;
+	struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX];
+} __packed;
+
+/**
+ * struct iwl_scan_umac_chan_param
+ * @flags: channel flags &enum iwl_scan_channel_flags
+ * @count: num of channels in scan request
+ * @reserved: for future use and alignment
+ */
+struct iwl_scan_umac_chan_param {
+	u8 flags;
+	u8 count;
+	__le16 reserved;
+} __packed; /*SCAN_CHANNEL_PARAMS_API_S_VER_1 */
+
+/**
+ * struct iwl_scan_req_umac
+ * @flags: &enum iwl_umac_scan_flags
+ * @uid: scan id, &enum iwl_umac_scan_uid_offsets
+ * @ooc_priority: out of channel priority - &enum iwl_scan_priority
+ * @general_flags: &enum iwl_umac_scan_general_flags
+ * @scan_start_mac_id: report the scan start TSF time according to this mac TSF
+ * @extended_dwell: dwell time for channels 1, 6 and 11
+ * @active_dwell: dwell time for active scan per LMAC
+ * @passive_dwell: dwell time for passive scan per LMAC
+ * @fragmented_dwell: dwell time for fragmented passive scan
+ * @adwell_default_n_aps: for adaptive dwell the default number of APs
+ *	per channel
+ * @adwell_default_n_aps_social: for adaptive dwell the default
+ *	number of APs per social (1,6,11) channel
+ * @general_flags2: &enum iwl_umac_scan_general_flags2
+ * @adwell_max_budget: for adaptive dwell the maximal budget of TU to be added
+ *	to total scan time
+ * @max_out_time: max out of serving channel time, per LMAC - for CDB there
+ *	are 2 LMACs
+ * @suspend_time: max suspend time, per LMAC - for CDB there are 2 LMACs
+ * @scan_priority: scan internal prioritization &enum iwl_scan_priority
+ * @num_of_fragments: Number of fragments needed for full coverage per band.
+ *	Relevant only for fragmented scan.
+ * @channel: &struct iwl_scan_umac_chan_param
+ * @reserved: for future use and alignment
+ * @reserved3: for future use and alignment
+ * @data: &struct iwl_scan_channel_cfg_umac and
+ *	&struct iwl_scan_req_umac_tail
+ */
+struct iwl_scan_req_umac {
+	__le32 flags;
+	__le32 uid;
+	__le32 ooc_priority;
+	__le16 general_flags;
+	u8 reserved;
+	u8 scan_start_mac_id;
+	union {
+		struct {
+			u8 extended_dwell;
+			u8 active_dwell;
+			u8 passive_dwell;
+			u8 fragmented_dwell;
+			__le32 max_out_time;
+			__le32 suspend_time;
+			__le32 scan_priority;
+			struct iwl_scan_umac_chan_param channel;
+			u8 data[];
+		} v1; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_1 */
+		struct {
+			u8 extended_dwell;
+			u8 active_dwell;
+			u8 passive_dwell;
+			u8 fragmented_dwell;
+			__le32 max_out_time[SCAN_TWO_LMACS];
+			__le32 suspend_time[SCAN_TWO_LMACS];
+			__le32 scan_priority;
+			struct iwl_scan_umac_chan_param channel;
+			u8 data[];
+		} v6; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_6 */
+		struct {
+			u8 active_dwell;
+			u8 passive_dwell;
+			u8 fragmented_dwell;
+			u8 adwell_default_n_aps;
+			u8 adwell_default_n_aps_social;
+			u8 reserved3;
+			__le16 adwell_max_budget;
+			__le32 max_out_time[SCAN_TWO_LMACS];
+			__le32 suspend_time[SCAN_TWO_LMACS];
+			__le32 scan_priority;
+			struct iwl_scan_umac_chan_param channel;
+			u8 data[];
+		} v7; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_7 */
+		struct {
+			u8 active_dwell[SCAN_TWO_LMACS];
+			u8 reserved2;
+			u8 adwell_default_n_aps;
+			u8 adwell_default_n_aps_social;
+			u8 general_flags2;
+			__le16 adwell_max_budget;
+			__le32 max_out_time[SCAN_TWO_LMACS];
+			__le32 suspend_time[SCAN_TWO_LMACS];
+			__le32 scan_priority;
+			u8 passive_dwell[SCAN_TWO_LMACS];
+			u8 num_of_fragments[SCAN_TWO_LMACS];
+			struct iwl_scan_umac_chan_param channel;
+			u8 data[];
+		} v8; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_8 */
+		struct {
+			u8 active_dwell[SCAN_TWO_LMACS];
+			u8 adwell_default_hb_n_aps;
+			u8 adwell_default_lb_n_aps;
+			u8 adwell_default_n_aps_social;
+			u8 general_flags2;
+			__le16 adwell_max_budget;
+			__le32 max_out_time[SCAN_TWO_LMACS];
+			__le32 suspend_time[SCAN_TWO_LMACS];
+			__le32 scan_priority;
+			u8 passive_dwell[SCAN_TWO_LMACS];
+			u8 num_of_fragments[SCAN_TWO_LMACS];
+			struct iwl_scan_umac_chan_param channel;
+			u8 data[];
+		} v9; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_9 */
+	};
+} __packed;
+
+#define IWL_SCAN_REQ_UMAC_SIZE_V8 sizeof(struct iwl_scan_req_umac)
+#define IWL_SCAN_REQ_UMAC_SIZE_V7 48
+#define IWL_SCAN_REQ_UMAC_SIZE_V6 44
+#define IWL_SCAN_REQ_UMAC_SIZE_V1 36
+
+/**
+ * struct iwl_scan_probe_params_v3
+ * @preq: scan probe request params
+ * @ssid_num: number of valid SSIDs in direct scan array
+ * @short_ssid_num: number of valid short SSIDs in short ssid array
+ * @bssid_num: number of valid bssid in bssids array
+ * @reserved: reserved
+ * @direct_scan: list of ssids
+ * @short_ssid: array of short ssids
+ * @bssid_array: array of bssids
+ */
+struct iwl_scan_probe_params_v3 {
+	struct iwl_scan_probe_req preq;
+	u8 ssid_num;
+	u8 short_ssid_num;
+	u8 bssid_num;
+	u8 reserved;
+	struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX];
+	__le32 short_ssid[SCAN_SHORT_SSID_MAX_SIZE];
+	u8 bssid_array[SCAN_BSSID_MAX_SIZE][ETH_ALEN];
+} __packed; /* SCAN_PROBE_PARAMS_API_S_VER_3 */
+
+/**
+ * struct iwl_scan_probe_params_v4
+ * @preq: scan probe request params
+ * @short_ssid_num: number of valid short SSIDs in short ssid array
+ * @bssid_num: number of valid bssid in bssids array
+ * @reserved: reserved
+ * @direct_scan: list of ssids
+ * @short_ssid: array of short ssids
+ * @bssid_array: array of bssids
+ */
+struct iwl_scan_probe_params_v4 {
+	struct iwl_scan_probe_req preq;
+	u8 short_ssid_num;
+	u8 bssid_num;
+	__le16 reserved;
+	struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX];
+	__le32 short_ssid[SCAN_SHORT_SSID_MAX_SIZE];
+	u8 bssid_array[SCAN_BSSID_MAX_SIZE][ETH_ALEN];
+} __packed; /* SCAN_PROBE_PARAMS_API_S_VER_4 */
+
+#define SCAN_MAX_NUM_CHANS_V3 67
+
+/**
+ * struct iwl_scan_channel_params_v4
+ * @flags: channel flags &enum iwl_scan_channel_flags
+ * @count: num of channels in scan request
+ * @num_of_aps_override: override the number of APs the FW uses to calculate
+ *	dwell time when adaptive dwell is used
+ * @reserved: for future use and alignment
+ * @channel_config: array of explicit channel configurations
+ *                  for 2.4Ghz and 5.2Ghz bands
+ * @adwell_ch_override_bitmap: when using adaptive dwell, override the number
+ *	of APs value with &num_of_aps_override for the channel.
+ *	To cast channel to index, use &iwl_mvm_scan_ch_and_band_to_idx
+ */
+struct iwl_scan_channel_params_v4 {
+	u8 flags;
+	u8 count;
+	u8 num_of_aps_override;
+	u8 reserved;
+	struct iwl_scan_channel_cfg_umac channel_config[SCAN_MAX_NUM_CHANS_V3];
+	u8 adwell_ch_override_bitmap[16];
+} __packed; /* SCAN_CHANNEL_PARAMS_API_S_VER_4 also
+	       SCAN_CHANNEL_PARAMS_API_S_VER_5 */
+
+/**
+ * struct iwl_scan_channel_params_v6
+ * @flags: channel flags &enum iwl_scan_channel_flags
+ * @count: num of channels in scan request
+ * @n_aps_override: override the number of APs the FW uses to calculate dwell
+ *	time when adaptive dwell is used.
+ *	Channel k will use n_aps_override[i] when BIT(20 + i) is set in
+ *	channel_config[k].flags
+ * @channel_config: array of explicit channel configurations
+ *                  for 2.4Ghz and 5.2Ghz bands
+ */
+struct iwl_scan_channel_params_v6 {
+	u8 flags;
+	u8 count;
+	u8 n_aps_override[2];
+	struct iwl_scan_channel_cfg_umac channel_config[SCAN_MAX_NUM_CHANS_V3];
+} __packed; /* SCAN_CHANNEL_PARAMS_API_S_VER_6 */
+
+/**
+ * struct iwl_scan_general_params_v11
+ * @flags: &enum iwl_umac_scan_general_flags_v2
+ * @reserved: reserved for future
+ * @scan_start_mac_id: report the scan start TSF time according to this mac TSF
+ * @active_dwell: dwell time for active scan per LMAC
+ * @adwell_default_2g: adaptive dwell default number of APs
+ *                        for 2.4GHz channel
+ * @adwell_default_5g: adaptive dwell default number of APs
+ *                        for 5GHz channels
+ * @adwell_default_social_chn: adaptive dwell default number of
+ *                             APs per social channel
+ * @flags2: for version 11 see &enum iwl_umac_scan_general_params_flags2.
+ *     Otherwise reserved.
+ * @adwell_max_budget: the maximal number of TUs that adaptive dwell
+ *                     can add to the total scan time
+ * @max_out_of_time: max out of serving channel time, per LMAC
+ * @suspend_time: max suspend time, per LMAC
+ * @scan_priority: priority of the request
+ * @passive_dwell: continues dwell time for passive channel
+ *                 (without adaptive dwell)
+ * @num_of_fragments: number of fragments needed for full fragmented
+ *                    scan coverage.
+ */
+struct iwl_scan_general_params_v11 {
+	__le16 flags;
+	u8 reserved;
+	u8 scan_start_mac_id;
+	u8 active_dwell[SCAN_TWO_LMACS];
+	u8 adwell_default_2g;
+	u8 adwell_default_5g;
+	u8 adwell_default_social_chn;
+	u8 flags2;
+	__le16 adwell_max_budget;
+	__le32 max_out_of_time[SCAN_TWO_LMACS];
+	__le32 suspend_time[SCAN_TWO_LMACS];
+	__le32 scan_priority;
+	u8 passive_dwell[SCAN_TWO_LMACS];
+	u8 num_of_fragments[SCAN_TWO_LMACS];
+} __packed; /* SCAN_GENERAL_PARAMS_API_S_VER_11 and *_VER_10 */
+
+/**
+ * struct iwl_scan_periodic_parms_v1
+ * @schedule: can scheduling parameter
+ * @delay: initial delay of the periodic scan in seconds
+ * @reserved: reserved for future
+ */
+struct iwl_scan_periodic_parms_v1 {
+	struct iwl_scan_umac_schedule schedule[IWL_MAX_SCHED_SCAN_PLANS];
+	__le16 delay;
+	__le16 reserved;
+} __packed; /* SCAN_PERIODIC_PARAMS_API_S_VER_1 */
+
+/**
+ * struct iwl_scan_req_params_v12
+ * @general_params: &struct iwl_scan_general_params_v11
+ * @channel_params: &struct iwl_scan_channel_params_v4
+ * @periodic_params: &struct iwl_scan_periodic_parms_v1
+ * @probe_params: &struct iwl_scan_probe_params_v3
+ */
+struct iwl_scan_req_params_v12 {
+	struct iwl_scan_general_params_v11 general_params;
+	struct iwl_scan_channel_params_v4 channel_params;
+	struct iwl_scan_periodic_parms_v1 periodic_params;
+	struct iwl_scan_probe_params_v3 probe_params;
+} __packed; /* SCAN_REQUEST_PARAMS_API_S_VER_12 */
+
+/**
+ * struct iwl_scan_req_params_v15
+ * @general_params: &struct iwl_scan_general_params_v11
+ * @channel_params: &struct iwl_scan_channel_params_v6
+ * @periodic_params: &struct iwl_scan_periodic_parms_v1
+ * @probe_params: &struct iwl_scan_probe_params_v4
+ */
+struct iwl_scan_req_params_v15 {
+	struct iwl_scan_general_params_v11 general_params;
+	struct iwl_scan_channel_params_v6 channel_params;
+	struct iwl_scan_periodic_parms_v1 periodic_params;
+	struct iwl_scan_probe_params_v4 probe_params;
+} __packed; /* SCAN_REQUEST_PARAMS_API_S_VER_15 and *_VER_14 */
+
+/**
+ * struct iwl_scan_req_umac_v12
+ * @uid: scan id, &enum iwl_umac_scan_uid_offsets
+ * @ooc_priority: out of channel priority - &enum iwl_scan_priority
+ * @scan_params: scan parameters
+ */
+struct iwl_scan_req_umac_v12 {
+	__le32 uid;
+	__le32 ooc_priority;
+	struct iwl_scan_req_params_v12 scan_params;
+} __packed; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_12 */
+
+/**
+ * struct iwl_scan_req_umac_v15
+ * @uid: scan id, &enum iwl_umac_scan_uid_offsets
+ * @ooc_priority: out of channel priority - &enum iwl_scan_priority
+ * @scan_params: scan parameters
+ */
+struct iwl_scan_req_umac_v15 {
+	__le32 uid;
+	__le32 ooc_priority;
+	struct iwl_scan_req_params_v15 scan_params;
+} __packed; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_15 and *_VER_14 */
+
+/**
+ * struct iwl_umac_scan_abort
+ * @uid: scan id, &enum iwl_umac_scan_uid_offsets
+ * @flags: reserved
+ */
+struct iwl_umac_scan_abort {
+	__le32 uid;
+	__le32 flags;
+} __packed; /* SCAN_ABORT_CMD_UMAC_API_S_VER_1 */
+
+/**
+ * struct iwl_umac_scan_complete
+ * @uid: scan id, &enum iwl_umac_scan_uid_offsets
+ * @last_schedule: last scheduling line
+ * @last_iter: last scan iteration number
+ * @status: &enum iwl_scan_offload_complete_status
+ * @ebs_status: &enum iwl_scan_ebs_status
+ * @time_from_last_iter: time elapsed from last iteration
+ * @reserved: for future use
+ */
+struct iwl_umac_scan_complete {
+	__le32 uid;
+	u8 last_schedule;
+	u8 last_iter;
+	u8 status;
+	u8 ebs_status;
+	__le32 time_from_last_iter;
+	__le32 reserved;
+} __packed; /* SCAN_COMPLETE_NTF_UMAC_API_S_VER_1 */
+
+#define SCAN_OFFLOAD_MATCHING_CHANNELS_LEN_V1 5
+#define SCAN_OFFLOAD_MATCHING_CHANNELS_LEN    7
+
+/**
+ * struct iwl_scan_offload_profile_match_v1 - match information
+ * @bssid: matched bssid
+ * @reserved: reserved
+ * @channel: channel where the match occurred
+ * @energy: energy
+ * @matching_feature: feature matches
+ * @matching_channels: bitmap of channels that matched, referencing
+ *	the channels passed in the scan offload request.
+ */
+struct iwl_scan_offload_profile_match_v1 {
+	u8 bssid[ETH_ALEN];
+	__le16 reserved;
+	u8 channel;
+	u8 energy;
+	u8 matching_feature;
+	u8 matching_channels[SCAN_OFFLOAD_MATCHING_CHANNELS_LEN_V1];
+} __packed; /* SCAN_OFFLOAD_PROFILE_MATCH_RESULTS_S_VER_1 */
+
+/**
+ * struct iwl_scan_offload_profiles_query_v1 - match results query response
+ * @matched_profiles: bitmap of matched profiles, referencing the
+ *	matches passed in the scan offload request
+ * @last_scan_age: age of the last offloaded scan
+ * @n_scans_done: number of offloaded scans done
+ * @gp2_d0u: GP2 when D0U occurred
+ * @gp2_invoked: GP2 when scan offload was invoked
+ * @resume_while_scanning: not used
+ * @self_recovery: obsolete
+ * @reserved: reserved
+ * @matches: array of match information, one for each match
+ */
+struct iwl_scan_offload_profiles_query_v1 {
+	__le32 matched_profiles;
+	__le32 last_scan_age;
+	__le32 n_scans_done;
+	__le32 gp2_d0u;
+	__le32 gp2_invoked;
+	u8 resume_while_scanning;
+	u8 self_recovery;
+	__le16 reserved;
+	struct iwl_scan_offload_profile_match_v1 matches[];
+} __packed; /* SCAN_OFFLOAD_PROFILES_QUERY_RSP_S_VER_2 */
+
+/**
+ * struct iwl_scan_offload_profile_match - match information
+ * @bssid: matched bssid
+ * @reserved: reserved
+ * @channel: channel where the match occurred
+ * @energy: energy
+ * @matching_feature: feature matches
+ * @matching_channels: bitmap of channels that matched, referencing
+ *	the channels passed in the scan offload request.
+ */
+struct iwl_scan_offload_profile_match {
+	u8 bssid[ETH_ALEN];
+	__le16 reserved;
+	u8 channel;
+	u8 energy;
+	u8 matching_feature;
+	u8 matching_channels[SCAN_OFFLOAD_MATCHING_CHANNELS_LEN];
+} __packed; /* SCAN_OFFLOAD_PROFILE_MATCH_RESULTS_S_VER_2 */
+
+/**
+ * struct iwl_scan_offload_match_info - match results information
+ * @matched_profiles: bitmap of matched profiles, referencing the
+ *	matches passed in the scan offload request
+ * @last_scan_age: age of the last offloaded scan
+ * @n_scans_done: number of offloaded scans done
+ * @gp2_d0u: GP2 when D0U occurred
+ * @gp2_invoked: GP2 when scan offload was invoked
+ * @resume_while_scanning: not used
+ * @self_recovery: obsolete
+ * @reserved: reserved
+ * @matches: array of match information, one for each match
+ */
+struct iwl_scan_offload_match_info {
+	__le32 matched_profiles;
+	__le32 last_scan_age;
+	__le32 n_scans_done;
+	__le32 gp2_d0u;
+	__le32 gp2_invoked;
+	u8 resume_while_scanning;
+	u8 self_recovery;
+	__le16 reserved;
+	struct iwl_scan_offload_profile_match matches[];
+} __packed; /* SCAN_OFFLOAD_PROFILES_QUERY_RSP_S_VER_3 and
+	     * SCAN_OFFLOAD_MATCH_INFO_NOTIFICATION_S_VER_1
+	     */
+
+/**
+ * struct iwl_umac_scan_iter_complete_notif - notifies end of scanning iteration
+ * @uid: scan id, &enum iwl_umac_scan_uid_offsets
+ * @scanned_channels: number of channels scanned and number of valid elements in
+ *	results array
+ * @status: one of SCAN_COMP_STATUS_*
+ * @bt_status: BT on/off status
+ * @last_channel: last channel that was scanned
+ * @start_tsf: TSF timer in usecs of the scan start time for the mac specified
+ *	in &struct iwl_scan_req_umac.
+ * @results: array of scan results, length in @scanned_channels
+ */
+struct iwl_umac_scan_iter_complete_notif {
+	__le32 uid;
+	u8 scanned_channels;
+	u8 status;
+	u8 bt_status;
+	u8 last_channel;
+	__le64 start_tsf;
+	struct iwl_scan_results_notif results[];
+} __packed; /* SCAN_ITER_COMPLETE_NTF_UMAC_API_S_VER_2 */
+
+#endif /* __iwl_fw_api_scan_h__ */