Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 955 insertions, 0 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/file.h b/drivers/net/wireless/intel/iwlwifi/fw/file.h
new file mode 100644
index 000000000..a7817d952
--- /dev/null
+++ b/drivers/net/wireless/intel/iwlwifi/fw/file.h
@@ -0,0 +1,955 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
+/*
+ * Copyright (C) 2008-2014, 2018-2021 Intel Corporation
+ * Copyright (C) 2013-2015 Intel Mobile Communications GmbH
+ * Copyright (C) 2016-2017 Intel Deutschland GmbH
+ */
+#ifndef __iwl_fw_file_h__
+#define __iwl_fw_file_h__
+
+#include <linux/netdevice.h>
+#include <linux/nl80211.h>
+
+/* v1/v2 uCode file layout */
+struct iwl_ucode_header {
+	__le32 ver;	/* major/minor/API/serial */
+	union {
+		struct {
+			__le32 inst_size;	/* bytes of runtime code */
+			__le32 data_size;	/* bytes of runtime data */
+			__le32 init_size;	/* bytes of init code */
+			__le32 init_data_size;	/* bytes of init data */
+			__le32 boot_size;	/* bytes of bootstrap code */
+			u8 data[0];		/* in same order as sizes */
+		} v1;
+		struct {
+			__le32 build;		/* build number */
+			__le32 inst_size;	/* bytes of runtime code */
+			__le32 data_size;	/* bytes of runtime data */
+			__le32 init_size;	/* bytes of init code */
+			__le32 init_data_size;	/* bytes of init data */
+			__le32 boot_size;	/* bytes of bootstrap code */
+			u8 data[0];		/* in same order as sizes */
+		} v2;
+	} u;
+};
+
+#define IWL_UCODE_TLV_DEBUG_BASE	0x1000005
+#define IWL_UCODE_TLV_CONST_BASE	0x100
+
+/*
+ * new TLV uCode file layout
+ *
+ * The new TLV file format contains TLVs, that each specify
+ * some piece of data.
+ */
+
+enum iwl_ucode_tlv_type {
+	IWL_UCODE_TLV_INVALID		= 0, /* unused */
+	IWL_UCODE_TLV_INST		= 1,
+	IWL_UCODE_TLV_DATA		= 2,
+	IWL_UCODE_TLV_INIT		= 3,
+	IWL_UCODE_TLV_INIT_DATA		= 4,
+	IWL_UCODE_TLV_BOOT		= 5,
+	IWL_UCODE_TLV_PROBE_MAX_LEN	= 6, /* a u32 value */
+	IWL_UCODE_TLV_PAN		= 7, /* deprecated -- only used in DVM */
+	IWL_UCODE_TLV_MEM_DESC		= 7, /* replaces PAN in non-DVM */
+	IWL_UCODE_TLV_RUNT_EVTLOG_PTR	= 8,
+	IWL_UCODE_TLV_RUNT_EVTLOG_SIZE	= 9,
+	IWL_UCODE_TLV_RUNT_ERRLOG_PTR	= 10,
+	IWL_UCODE_TLV_INIT_EVTLOG_PTR	= 11,
+	IWL_UCODE_TLV_INIT_EVTLOG_SIZE	= 12,
+	IWL_UCODE_TLV_INIT_ERRLOG_PTR	= 13,
+	IWL_UCODE_TLV_ENHANCE_SENS_TBL	= 14,
+	IWL_UCODE_TLV_PHY_CALIBRATION_SIZE = 15,
+	IWL_UCODE_TLV_WOWLAN_INST	= 16,
+	IWL_UCODE_TLV_WOWLAN_DATA	= 17,
+	IWL_UCODE_TLV_FLAGS		= 18,
+	IWL_UCODE_TLV_SEC_RT		= 19,
+	IWL_UCODE_TLV_SEC_INIT		= 20,
+	IWL_UCODE_TLV_SEC_WOWLAN	= 21,
+	IWL_UCODE_TLV_DEF_CALIB		= 22,
+	IWL_UCODE_TLV_PHY_SKU		= 23,
+	IWL_UCODE_TLV_SECURE_SEC_RT	= 24,
+	IWL_UCODE_TLV_SECURE_SEC_INIT	= 25,
+	IWL_UCODE_TLV_SECURE_SEC_WOWLAN	= 26,
+	IWL_UCODE_TLV_NUM_OF_CPU	= 27,
+	IWL_UCODE_TLV_CSCHEME		= 28,
+	IWL_UCODE_TLV_API_CHANGES_SET	= 29,
+	IWL_UCODE_TLV_ENABLED_CAPABILITIES	= 30,
+	IWL_UCODE_TLV_N_SCAN_CHANNELS		= 31,
+	IWL_UCODE_TLV_PAGING		= 32,
+	IWL_UCODE_TLV_SEC_RT_USNIFFER	= 34,
+	/* 35 is unused */
+	IWL_UCODE_TLV_FW_VERSION	= 36,
+	IWL_UCODE_TLV_FW_DBG_DEST	= 38,
+	IWL_UCODE_TLV_FW_DBG_CONF	= 39,
+	IWL_UCODE_TLV_FW_DBG_TRIGGER	= 40,
+	IWL_UCODE_TLV_CMD_VERSIONS	= 48,
+	IWL_UCODE_TLV_FW_GSCAN_CAPA	= 50,
+	IWL_UCODE_TLV_FW_MEM_SEG	= 51,
+	IWL_UCODE_TLV_IML		= 52,
+	IWL_UCODE_TLV_UMAC_DEBUG_ADDRS	= 54,
+	IWL_UCODE_TLV_LMAC_DEBUG_ADDRS	= 55,
+	IWL_UCODE_TLV_FW_RECOVERY_INFO	= 57,
+	IWL_UCODE_TLV_HW_TYPE			= 58,
+	IWL_UCODE_TLV_FW_FSEQ_VERSION		= 60,
+	IWL_UCODE_TLV_PHY_INTEGRATION_VERSION	= 61,
+
+	IWL_UCODE_TLV_PNVM_VERSION		= 62,
+	IWL_UCODE_TLV_PNVM_SKU			= 64,
+
+	IWL_UCODE_TLV_SEC_TABLE_ADDR		= 66,
+	IWL_UCODE_TLV_D3_KEK_KCK_ADDR		= 67,
+
+	IWL_UCODE_TLV_FW_NUM_STATIONS		= IWL_UCODE_TLV_CONST_BASE + 0,
+
+	IWL_UCODE_TLV_TYPE_DEBUG_INFO		= IWL_UCODE_TLV_DEBUG_BASE + 0,
+	IWL_UCODE_TLV_TYPE_BUFFER_ALLOCATION	= IWL_UCODE_TLV_DEBUG_BASE + 1,
+	IWL_UCODE_TLV_TYPE_HCMD			= IWL_UCODE_TLV_DEBUG_BASE + 2,
+	IWL_UCODE_TLV_TYPE_REGIONS		= IWL_UCODE_TLV_DEBUG_BASE + 3,
+	IWL_UCODE_TLV_TYPE_TRIGGERS		= IWL_UCODE_TLV_DEBUG_BASE + 4,
+	IWL_UCODE_TLV_TYPE_CONF_SET		= IWL_UCODE_TLV_DEBUG_BASE + 5,
+	IWL_UCODE_TLV_DEBUG_MAX = IWL_UCODE_TLV_TYPE_TRIGGERS,
+
+	/* TLVs 0x1000-0x2000 are for internal driver usage */
+	IWL_UCODE_TLV_FW_DBG_DUMP_LST	= 0x1000,
+};
+
+struct iwl_ucode_tlv {
+	__le32 type;		/* see above */
+	__le32 length;		/* not including type/length fields */
+	u8 data[];
+};
+
+#define IWL_TLV_UCODE_MAGIC		0x0a4c5749
+#define FW_VER_HUMAN_READABLE_SZ	64
+
+struct iwl_tlv_ucode_header {
+	/*
+	 * The TLV style ucode header is distinguished from
+	 * the v1/v2 style header by first four bytes being
+	 * zero, as such is an invalid combination of
+	 * major/minor/API/serial versions.
+	 */
+	__le32 zero;
+	__le32 magic;
+	u8 human_readable[FW_VER_HUMAN_READABLE_SZ];
+	/* major/minor/API/serial or major in new format */
+	__le32 ver;
+	__le32 build;
+	__le64 ignore;
+	/*
+	 * The data contained herein has a TLV layout,
+	 * see above for the TLV header and types.
+	 * Note that each TLV is padded to a length
+	 * that is a multiple of 4 for alignment.
+	 */
+	u8 data[];
+};
+
+/*
+ * ucode TLVs
+ *
+ * ability to get extension for: flags & capabilities from ucode binaries files
+ */
+struct iwl_ucode_api {
+	__le32 api_index;
+	__le32 api_flags;
+} __packed;
+
+struct iwl_ucode_capa {
+	__le32 api_index;
+	__le32 api_capa;
+} __packed;
+
+/**
+ * enum iwl_ucode_tlv_flag - ucode API flags
+ * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously
+ *	was a separate TLV but moved here to save space.
+ * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behavior on hidden SSID,
+ *	treats good CRC threshold as a boolean
+ * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w).
+ * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: This uCode image supports uAPSD
+ * @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of block list instead of 64 in scan
+ *	offload profile config command.
+ * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six
+ *	(rather than two) IPv6 addresses
+ * @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element
+ *	from the probe request template.
+ * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version)
+ * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version)
+ * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD
+ * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
+ * @IWL_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS.
+ */
+enum iwl_ucode_tlv_flag {
+	IWL_UCODE_TLV_FLAGS_PAN			= BIT(0),
+	IWL_UCODE_TLV_FLAGS_NEWSCAN		= BIT(1),
+	IWL_UCODE_TLV_FLAGS_MFP			= BIT(2),
+	IWL_UCODE_TLV_FLAGS_SHORT_BL		= BIT(7),
+	IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS	= BIT(10),
+	IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID	= BIT(12),
+	IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL	= BIT(15),
+	IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE	= BIT(16),
+	IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT	= BIT(24),
+	IWL_UCODE_TLV_FLAGS_EBS_SUPPORT		= BIT(25),
+	IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD	= BIT(26),
+};
+
+typedef unsigned int __bitwise iwl_ucode_tlv_api_t;
+
+/**
+ * enum iwl_ucode_tlv_api - ucode api
+ * @IWL_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time
+ *	longer than the passive one, which is essential for fragmented scan.
+ * @IWL_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source.
+ * @IWL_UCODE_TLV_API_LQ_SS_PARAMS: Configure STBC/BFER via LQ CMD ss_params
+ * @IWL_UCODE_TLV_API_NEW_VERSION: new versioning format
+ * @IWL_UCODE_TLV_API_SCAN_TSF_REPORT: Scan start time reported in scan
+ *	iteration complete notification, and the timestamp reported for RX
+ *	received during scan, are reported in TSF of the mac specified in the
+ *	scan request.
+ * @IWL_UCODE_TLV_API_TKIP_MIC_KEYS: This ucode supports version 2 of
+ *	ADD_MODIFY_STA_KEY_API_S_VER_2.
+ * @IWL_UCODE_TLV_API_STA_TYPE: This ucode supports station type assignement.
+ * @IWL_UCODE_TLV_API_NAN2_VER2: This ucode supports NAN API version 2
+ * @IWL_UCODE_TLV_API_NEW_RX_STATS: should new RX STATISTICS API be used
+ * @IWL_UCODE_TLV_API_QUOTA_LOW_LATENCY: Quota command includes a field
+ *	indicating low latency direction.
+ * @IWL_UCODE_TLV_API_DEPRECATE_TTAK: RX status flag TTAK ok (bit 7) is
+ *	deprecated.
+ * @IWL_UCODE_TLV_API_ADAPTIVE_DWELL_V2: This ucode supports version 8
+ *	of scan request: SCAN_REQUEST_CMD_UMAC_API_S_VER_8
+ * @IWL_UCODE_TLV_API_FRAG_EBS: This ucode supports fragmented EBS
+ * @IWL_UCODE_TLV_API_REDUCE_TX_POWER: This ucode supports v5 of
+ *	the REDUCE_TX_POWER_CMD.
+ * @IWL_UCODE_TLV_API_SHORT_BEACON_NOTIF: This ucode supports the short
+ *	version of the beacon notification.
+ * @IWL_UCODE_TLV_API_BEACON_FILTER_V4: This ucode supports v4 of
+ *	BEACON_FILTER_CONFIG_API_S_VER_4.
+ * @IWL_UCODE_TLV_API_REGULATORY_NVM_INFO: This ucode supports v4 of
+ *	REGULATORY_NVM_GET_INFO_RSP_API_S.
+ * @IWL_UCODE_TLV_API_FTM_NEW_RANGE_REQ: This ucode supports v7 of
+ *	LOCATION_RANGE_REQ_CMD_API_S and v6 of LOCATION_RANGE_RESP_NTFY_API_S.
+ * @IWL_UCODE_TLV_API_SCAN_OFFLOAD_CHANS: This ucode supports v2 of
+ *	SCAN_OFFLOAD_PROFILE_MATCH_RESULTS_S and v3 of
+ *	SCAN_OFFLOAD_PROFILES_QUERY_RSP_S.
+ * @IWL_UCODE_TLV_API_MBSSID_HE: This ucode supports v2 of
+ *	STA_CONTEXT_DOT11AX_API_S
+ * @IWL_UCODE_TLV_API_SAR_TABLE_VER: This ucode supports different sar
+ *	version tables.
+ * @IWL_UCODE_TLV_API_REDUCED_SCAN_CONFIG: This ucode supports v3 of
+ *  SCAN_CONFIG_DB_CMD_API_S.
+ *
+ * @NUM_IWL_UCODE_TLV_API: number of bits used
+ */
+enum iwl_ucode_tlv_api {
+	/* API Set 0 */
+	IWL_UCODE_TLV_API_FRAGMENTED_SCAN	= (__force iwl_ucode_tlv_api_t)8,
+	IWL_UCODE_TLV_API_WIFI_MCC_UPDATE	= (__force iwl_ucode_tlv_api_t)9,
+	IWL_UCODE_TLV_API_LQ_SS_PARAMS		= (__force iwl_ucode_tlv_api_t)18,
+	IWL_UCODE_TLV_API_NEW_VERSION		= (__force iwl_ucode_tlv_api_t)20,
+	IWL_UCODE_TLV_API_SCAN_TSF_REPORT	= (__force iwl_ucode_tlv_api_t)28,
+	IWL_UCODE_TLV_API_TKIP_MIC_KEYS		= (__force iwl_ucode_tlv_api_t)29,
+	IWL_UCODE_TLV_API_STA_TYPE		= (__force iwl_ucode_tlv_api_t)30,
+	IWL_UCODE_TLV_API_NAN2_VER2		= (__force iwl_ucode_tlv_api_t)31,
+	/* API Set 1 */
+	IWL_UCODE_TLV_API_ADAPTIVE_DWELL	= (__force iwl_ucode_tlv_api_t)32,
+	IWL_UCODE_TLV_API_OCE			= (__force iwl_ucode_tlv_api_t)33,
+	IWL_UCODE_TLV_API_NEW_BEACON_TEMPLATE	= (__force iwl_ucode_tlv_api_t)34,
+	IWL_UCODE_TLV_API_NEW_RX_STATS		= (__force iwl_ucode_tlv_api_t)35,
+	IWL_UCODE_TLV_API_WOWLAN_KEY_MATERIAL	= (__force iwl_ucode_tlv_api_t)36,
+	IWL_UCODE_TLV_API_QUOTA_LOW_LATENCY	= (__force iwl_ucode_tlv_api_t)38,
+	IWL_UCODE_TLV_API_DEPRECATE_TTAK	= (__force iwl_ucode_tlv_api_t)41,
+	IWL_UCODE_TLV_API_ADAPTIVE_DWELL_V2	= (__force iwl_ucode_tlv_api_t)42,
+	IWL_UCODE_TLV_API_FRAG_EBS		= (__force iwl_ucode_tlv_api_t)44,
+	IWL_UCODE_TLV_API_REDUCE_TX_POWER	= (__force iwl_ucode_tlv_api_t)45,
+	IWL_UCODE_TLV_API_SHORT_BEACON_NOTIF	= (__force iwl_ucode_tlv_api_t)46,
+	IWL_UCODE_TLV_API_BEACON_FILTER_V4      = (__force iwl_ucode_tlv_api_t)47,
+	IWL_UCODE_TLV_API_REGULATORY_NVM_INFO   = (__force iwl_ucode_tlv_api_t)48,
+	IWL_UCODE_TLV_API_FTM_NEW_RANGE_REQ     = (__force iwl_ucode_tlv_api_t)49,
+	IWL_UCODE_TLV_API_SCAN_OFFLOAD_CHANS    = (__force iwl_ucode_tlv_api_t)50,
+	IWL_UCODE_TLV_API_MBSSID_HE		= (__force iwl_ucode_tlv_api_t)52,
+	IWL_UCODE_TLV_API_WOWLAN_TCP_SYN_WAKE	= (__force iwl_ucode_tlv_api_t)53,
+	IWL_UCODE_TLV_API_FTM_RTT_ACCURACY      = (__force iwl_ucode_tlv_api_t)54,
+	IWL_UCODE_TLV_API_SAR_TABLE_VER         = (__force iwl_ucode_tlv_api_t)55,
+	IWL_UCODE_TLV_API_REDUCED_SCAN_CONFIG   = (__force iwl_ucode_tlv_api_t)56,
+	IWL_UCODE_TLV_API_ADWELL_HB_DEF_N_AP	= (__force iwl_ucode_tlv_api_t)57,
+	IWL_UCODE_TLV_API_SCAN_EXT_CHAN_VER	= (__force iwl_ucode_tlv_api_t)58,
+	IWL_UCODE_TLV_API_BAND_IN_RX_DATA	= (__force iwl_ucode_tlv_api_t)59,
+
+
+#ifdef __CHECKER__
+	/* sparse says it cannot increment the previous enum member */
+#define NUM_IWL_UCODE_TLV_API 128
+#else
+	NUM_IWL_UCODE_TLV_API
+#endif
+};
+
+typedef unsigned int __bitwise iwl_ucode_tlv_capa_t;
+
+/**
+ * enum iwl_ucode_tlv_capa - ucode capabilities
+ * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3
+ * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory
+ * @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan.
+ * @IWL_UCODE_TLV_CAPA_BEAMFORMER: supports Beamformer
+ * @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality
+ * @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current
+ *	tx power value into TPC Report action frame and Link Measurement Report
+ *	action frame
+ * @IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current
+ *	channel in DS parameter set element in probe requests.
+ * @IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in
+ *	probe requests.
+ * @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests
+ * @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA),
+ *	which also implies support for the scheduler configuration command
+ * @IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching
+ * @IWL_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG: Consolidated D3-D0 image
+ * @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command
+ * @IWL_UCODE_TLV_CAPA_CSUM_SUPPORT: supports TCP Checksum Offload
+ * @IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS: support radio and beacon statistics
+ * @IWL_UCODE_TLV_CAPA_P2P_SCM_UAPSD: supports U-APSD on p2p interface when it
+ *	is standalone or with a BSS station interface in the same binding.
+ * @IWL_UCODE_TLV_CAPA_BT_COEX_PLCR: enabled BT Coex packet level co-running
+ * @IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC: ucode supports LAR updates with different
+ *	sources for the MCC. This TLV bit is a future replacement to
+ *	IWL_UCODE_TLV_API_WIFI_MCC_UPDATE. When either is set, multi-source LAR
+ *	is supported.
+ * @IWL_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC
+ * @IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT: supports gscan (no longer used)
+ * @IWL_UCODE_TLV_CAPA_SOC_LATENCY_SUPPORT: the firmware supports setting
+ *	stabilization latency for SoCs.
+ * @IWL_UCODE_TLV_CAPA_STA_PM_NOTIF: firmware will send STA PM notification
+ * @IWL_UCODE_TLV_CAPA_TLC_OFFLOAD: firmware implements rate scaling algorithm
+ * @IWL_UCODE_TLV_CAPA_DYNAMIC_QUOTA: firmware implements quota related
+ * @IWL_UCODE_TLV_CAPA_COEX_SCHEMA_2: firmware implements Coex Schema 2
+ * IWL_UCODE_TLV_CAPA_CHANNEL_SWITCH_CMD: firmware supports CSA command
+ * @IWL_UCODE_TLV_CAPA_ULTRA_HB_CHANNELS: firmware supports ultra high band
+ *	(6 GHz).
+ * @IWL_UCODE_TLV_CAPA_CS_MODIFY: firmware supports modify action CSA command
+ * @IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE: extended DTS measurement
+ * @IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS: supports short PM timeouts
+ * @IWL_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT: supports bt-coex Multi-priority LUT
+ * @IWL_UCODE_TLV_CAPA_CSA_AND_TBTT_OFFLOAD: the firmware supports CSA
+ *	countdown offloading. Beacon notifications are not sent to the host.
+ *	The fw also offloads TBTT alignment.
+ * @IWL_UCODE_TLV_CAPA_BEACON_ANT_SELECTION: firmware will decide on what
+ *	antenna the beacon should be transmitted
+ * @IWL_UCODE_TLV_CAPA_BEACON_STORING: firmware will store the latest beacon
+ *	from AP and will send it upon d0i3 exit.
+ * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT_V3: support LAR API V3
+ * @IWL_UCODE_TLV_CAPA_CT_KILL_BY_FW: firmware responsible for CT-kill
+ * @IWL_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT: supports temperature
+ *	thresholds reporting
+ * @IWL_UCODE_TLV_CAPA_CTDP_SUPPORT: supports cTDP command
+ * @IWL_UCODE_TLV_CAPA_USNIFFER_UNIFIED: supports usniffer enabled in
+ *	regular image.
+ * @IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG: support getting more shared
+ *	memory addresses from the firmware.
+ * @IWL_UCODE_TLV_CAPA_LQM_SUPPORT: supports Link Quality Measurement
+ * @IWL_UCODE_TLV_CAPA_TX_POWER_ACK: reduced TX power API has larger
+ *	command size (command version 4) that supports toggling ACK TX
+ *	power reduction.
+ * @IWL_UCODE_TLV_CAPA_D3_DEBUG: supports debug recording during D3
+ * @IWL_UCODE_TLV_CAPA_MCC_UPDATE_11AX_SUPPORT: MCC response support 11ax
+ *	capability.
+ * @IWL_UCODE_TLV_CAPA_CSI_REPORTING: firmware is capable of being configured
+ *	to report the CSI information with (certain) RX frames
+ * @IWL_UCODE_TLV_CAPA_FTM_CALIBRATED: has FTM calibrated and thus supports both
+ *	initiator and responder
+ * @IWL_UCODE_TLV_CAPA_MLME_OFFLOAD: supports MLME offload
+ * @IWL_UCODE_TLV_CAPA_PROTECTED_TWT: Supports protection of TWT action frames
+ * @IWL_UCODE_TLV_CAPA_FW_RESET_HANDSHAKE: Supports the firmware handshake in
+ *	reset flow
+ * @IWL_UCODE_TLV_CAPA_PASSIVE_6GHZ_SCAN: Support for passive scan on 6GHz PSC
+ *      channels even when these are not enabled.
+ * @IWL_UCODE_TLV_CAPA_DUMP_COMPLETE_SUPPORT: Support for indicating dump collection
+ *	complete to FW.
+ *
+ * @NUM_IWL_UCODE_TLV_CAPA: number of bits used
+ */
+enum iwl_ucode_tlv_capa {
+	/* set 0 */
+	IWL_UCODE_TLV_CAPA_D0I3_SUPPORT			= (__force iwl_ucode_tlv_capa_t)0,
+	IWL_UCODE_TLV_CAPA_LAR_SUPPORT			= (__force iwl_ucode_tlv_capa_t)1,
+	IWL_UCODE_TLV_CAPA_UMAC_SCAN			= (__force iwl_ucode_tlv_capa_t)2,
+	IWL_UCODE_TLV_CAPA_BEAMFORMER			= (__force iwl_ucode_tlv_capa_t)3,
+	IWL_UCODE_TLV_CAPA_TDLS_SUPPORT			= (__force iwl_ucode_tlv_capa_t)6,
+	IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT	= (__force iwl_ucode_tlv_capa_t)8,
+	IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT	= (__force iwl_ucode_tlv_capa_t)9,
+	IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT	= (__force iwl_ucode_tlv_capa_t)10,
+	IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT		= (__force iwl_ucode_tlv_capa_t)11,
+	IWL_UCODE_TLV_CAPA_DQA_SUPPORT			= (__force iwl_ucode_tlv_capa_t)12,
+	IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH		= (__force iwl_ucode_tlv_capa_t)13,
+	IWL_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG		= (__force iwl_ucode_tlv_capa_t)17,
+	IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT		= (__force iwl_ucode_tlv_capa_t)18,
+	IWL_UCODE_TLV_CAPA_CSUM_SUPPORT			= (__force iwl_ucode_tlv_capa_t)21,
+	IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS		= (__force iwl_ucode_tlv_capa_t)22,
+	IWL_UCODE_TLV_CAPA_P2P_SCM_UAPSD		= (__force iwl_ucode_tlv_capa_t)26,
+	IWL_UCODE_TLV_CAPA_BT_COEX_PLCR			= (__force iwl_ucode_tlv_capa_t)28,
+	IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC		= (__force iwl_ucode_tlv_capa_t)29,
+	IWL_UCODE_TLV_CAPA_BT_COEX_RRC			= (__force iwl_ucode_tlv_capa_t)30,
+	IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT		= (__force iwl_ucode_tlv_capa_t)31,
+
+	/* set 1 */
+	IWL_UCODE_TLV_CAPA_SOC_LATENCY_SUPPORT		= (__force iwl_ucode_tlv_capa_t)37,
+	IWL_UCODE_TLV_CAPA_STA_PM_NOTIF			= (__force iwl_ucode_tlv_capa_t)38,
+	IWL_UCODE_TLV_CAPA_BINDING_CDB_SUPPORT		= (__force iwl_ucode_tlv_capa_t)39,
+	IWL_UCODE_TLV_CAPA_CDB_SUPPORT			= (__force iwl_ucode_tlv_capa_t)40,
+	IWL_UCODE_TLV_CAPA_D0I3_END_FIRST		= (__force iwl_ucode_tlv_capa_t)41,
+	IWL_UCODE_TLV_CAPA_TLC_OFFLOAD                  = (__force iwl_ucode_tlv_capa_t)43,
+	IWL_UCODE_TLV_CAPA_DYNAMIC_QUOTA                = (__force iwl_ucode_tlv_capa_t)44,
+	IWL_UCODE_TLV_CAPA_COEX_SCHEMA_2		= (__force iwl_ucode_tlv_capa_t)45,
+	IWL_UCODE_TLV_CAPA_CHANNEL_SWITCH_CMD		= (__force iwl_ucode_tlv_capa_t)46,
+	IWL_UCODE_TLV_CAPA_FTM_CALIBRATED		= (__force iwl_ucode_tlv_capa_t)47,
+	IWL_UCODE_TLV_CAPA_ULTRA_HB_CHANNELS		= (__force iwl_ucode_tlv_capa_t)48,
+	IWL_UCODE_TLV_CAPA_CS_MODIFY			= (__force iwl_ucode_tlv_capa_t)49,
+	IWL_UCODE_TLV_CAPA_SET_LTR_GEN2			= (__force iwl_ucode_tlv_capa_t)50,
+	IWL_UCODE_TLV_CAPA_SET_PPAG			= (__force iwl_ucode_tlv_capa_t)52,
+	IWL_UCODE_TLV_CAPA_TAS_CFG			= (__force iwl_ucode_tlv_capa_t)53,
+	IWL_UCODE_TLV_CAPA_SESSION_PROT_CMD		= (__force iwl_ucode_tlv_capa_t)54,
+	IWL_UCODE_TLV_CAPA_PROTECTED_TWT		= (__force iwl_ucode_tlv_capa_t)56,
+	IWL_UCODE_TLV_CAPA_FW_RESET_HANDSHAKE		= (__force iwl_ucode_tlv_capa_t)57,
+	IWL_UCODE_TLV_CAPA_PASSIVE_6GHZ_SCAN		= (__force iwl_ucode_tlv_capa_t)58,
+	IWL_UCODE_TLV_CAPA_HIDDEN_6GHZ_SCAN		= (__force iwl_ucode_tlv_capa_t)59,
+	IWL_UCODE_TLV_CAPA_BROADCAST_TWT		= (__force iwl_ucode_tlv_capa_t)60,
+	IWL_UCODE_TLV_CAPA_COEX_HIGH_PRIO		= (__force iwl_ucode_tlv_capa_t)61,
+	IWL_UCODE_TLV_CAPA_RFIM_SUPPORT			= (__force iwl_ucode_tlv_capa_t)62,
+	IWL_UCODE_TLV_CAPA_BAID_ML_SUPPORT		= (__force iwl_ucode_tlv_capa_t)63,
+
+	/* set 2 */
+	IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE		= (__force iwl_ucode_tlv_capa_t)64,
+	IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS		= (__force iwl_ucode_tlv_capa_t)65,
+	IWL_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT		= (__force iwl_ucode_tlv_capa_t)67,
+	IWL_UCODE_TLV_CAPA_MULTI_QUEUE_RX_SUPPORT	= (__force iwl_ucode_tlv_capa_t)68,
+	IWL_UCODE_TLV_CAPA_CSA_AND_TBTT_OFFLOAD		= (__force iwl_ucode_tlv_capa_t)70,
+	IWL_UCODE_TLV_CAPA_BEACON_ANT_SELECTION		= (__force iwl_ucode_tlv_capa_t)71,
+	IWL_UCODE_TLV_CAPA_BEACON_STORING		= (__force iwl_ucode_tlv_capa_t)72,
+	IWL_UCODE_TLV_CAPA_LAR_SUPPORT_V3		= (__force iwl_ucode_tlv_capa_t)73,
+	IWL_UCODE_TLV_CAPA_CT_KILL_BY_FW		= (__force iwl_ucode_tlv_capa_t)74,
+	IWL_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT	= (__force iwl_ucode_tlv_capa_t)75,
+	IWL_UCODE_TLV_CAPA_CTDP_SUPPORT			= (__force iwl_ucode_tlv_capa_t)76,
+	IWL_UCODE_TLV_CAPA_USNIFFER_UNIFIED		= (__force iwl_ucode_tlv_capa_t)77,
+	IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG	= (__force iwl_ucode_tlv_capa_t)80,
+	IWL_UCODE_TLV_CAPA_LQM_SUPPORT			= (__force iwl_ucode_tlv_capa_t)81,
+	IWL_UCODE_TLV_CAPA_TX_POWER_ACK			= (__force iwl_ucode_tlv_capa_t)84,
+	IWL_UCODE_TLV_CAPA_D3_DEBUG			= (__force iwl_ucode_tlv_capa_t)87,
+	IWL_UCODE_TLV_CAPA_LED_CMD_SUPPORT		= (__force iwl_ucode_tlv_capa_t)88,
+	IWL_UCODE_TLV_CAPA_MCC_UPDATE_11AX_SUPPORT	= (__force iwl_ucode_tlv_capa_t)89,
+	IWL_UCODE_TLV_CAPA_CSI_REPORTING		= (__force iwl_ucode_tlv_capa_t)90,
+	IWL_UCODE_TLV_CAPA_DBG_SUSPEND_RESUME_CMD_SUPP	= (__force iwl_ucode_tlv_capa_t)92,
+	IWL_UCODE_TLV_CAPA_DBG_BUF_ALLOC_CMD_SUPP	= (__force iwl_ucode_tlv_capa_t)93,
+
+	/* set 3 */
+	IWL_UCODE_TLV_CAPA_MLME_OFFLOAD			= (__force iwl_ucode_tlv_capa_t)96,
+
+	/*
+	 * @IWL_UCODE_TLV_CAPA_PSC_CHAN_SUPPORT: supports PSC channels
+	 */
+	IWL_UCODE_TLV_CAPA_PSC_CHAN_SUPPORT		= (__force iwl_ucode_tlv_capa_t)98,
+
+	IWL_UCODE_TLV_CAPA_BIGTK_SUPPORT		= (__force iwl_ucode_tlv_capa_t)100,
+	IWL_UCODE_TLV_CAPA_DRAM_FRAG_SUPPORT		= (__force iwl_ucode_tlv_capa_t)104,
+	IWL_UCODE_TLV_CAPA_DUMP_COMPLETE_SUPPORT	= (__force iwl_ucode_tlv_capa_t)105,
+
+#ifdef __CHECKER__
+	/* sparse says it cannot increment the previous enum member */
+#define NUM_IWL_UCODE_TLV_CAPA 128
+#else
+	NUM_IWL_UCODE_TLV_CAPA
+#endif
+};
+
+/* The default calibrate table size if not specified by firmware file */
+#define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE	18
+#define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE		19
+#define IWL_MAX_PHY_CALIBRATE_TBL_SIZE			253
+
+/* The default max probe length if not specified by the firmware file */
+#define IWL_DEFAULT_MAX_PROBE_LENGTH	200
+
+/*
+ * For 16.0 uCode and above, there is no differentiation between sections,
+ * just an offset to the HW address.
+ */
+#define CPU1_CPU2_SEPARATOR_SECTION	0xFFFFCCCC
+#define PAGING_SEPARATOR_SECTION	0xAAAABBBB
+
+/* uCode version contains 4 values: Major/Minor/API/Serial */
+#define IWL_UCODE_MAJOR(ver)	(((ver) & 0xFF000000) >> 24)
+#define IWL_UCODE_MINOR(ver)	(((ver) & 0x00FF0000) >> 16)
+#define IWL_UCODE_API(ver)	(((ver) & 0x0000FF00) >> 8)
+#define IWL_UCODE_SERIAL(ver)	((ver) & 0x000000FF)
+
+/**
+ * struct iwl_tlv_calib_ctrl - Calibration control struct.
+ * Sent as part of the phy configuration command.
+ * @flow_trigger: bitmap for which calibrations to perform according to
+ *		flow triggers.
+ * @event_trigger: bitmap for which calibrations to perform according to
+ *		event triggers.
+ */
+struct iwl_tlv_calib_ctrl {
+	__le32 flow_trigger;
+	__le32 event_trigger;
+} __packed;
+
+enum iwl_fw_phy_cfg {
+	FW_PHY_CFG_RADIO_TYPE_POS = 0,
+	FW_PHY_CFG_RADIO_TYPE = 0x3 << FW_PHY_CFG_RADIO_TYPE_POS,
+	FW_PHY_CFG_RADIO_STEP_POS = 2,
+	FW_PHY_CFG_RADIO_STEP = 0x3 << FW_PHY_CFG_RADIO_STEP_POS,
+	FW_PHY_CFG_RADIO_DASH_POS = 4,
+	FW_PHY_CFG_RADIO_DASH = 0x3 << FW_PHY_CFG_RADIO_DASH_POS,
+	FW_PHY_CFG_TX_CHAIN_POS = 16,
+	FW_PHY_CFG_TX_CHAIN = 0xf << FW_PHY_CFG_TX_CHAIN_POS,
+	FW_PHY_CFG_RX_CHAIN_POS = 20,
+	FW_PHY_CFG_RX_CHAIN = 0xf << FW_PHY_CFG_RX_CHAIN_POS,
+	FW_PHY_CFG_CHAIN_SAD_POS = 23,
+	FW_PHY_CFG_CHAIN_SAD_ENABLED = 0x1 << FW_PHY_CFG_CHAIN_SAD_POS,
+	FW_PHY_CFG_CHAIN_SAD_ANT_A = 0x2 << FW_PHY_CFG_CHAIN_SAD_POS,
+	FW_PHY_CFG_CHAIN_SAD_ANT_B = 0x4 << FW_PHY_CFG_CHAIN_SAD_POS,
+	FW_PHY_CFG_SHARED_CLK = BIT(31),
+};
+
+enum iwl_fw_dbg_reg_operator {
+	CSR_ASSIGN,
+	CSR_SETBIT,
+	CSR_CLEARBIT,
+
+	PRPH_ASSIGN,
+	PRPH_SETBIT,
+	PRPH_CLEARBIT,
+
+	INDIRECT_ASSIGN,
+	INDIRECT_SETBIT,
+	INDIRECT_CLEARBIT,
+
+	PRPH_BLOCKBIT,
+};
+
+/**
+ * struct iwl_fw_dbg_reg_op - an operation on a register
+ *
+ * @op: &enum iwl_fw_dbg_reg_operator
+ * @addr: offset of the register
+ * @val: value
+ */
+struct iwl_fw_dbg_reg_op {
+	u8 op;
+	u8 reserved[3];
+	__le32 addr;
+	__le32 val;
+} __packed;
+
+/**
+ * enum iwl_fw_dbg_monitor_mode - available monitor recording modes
+ *
+ * @SMEM_MODE: monitor stores the data in SMEM
+ * @EXTERNAL_MODE: monitor stores the data in allocated DRAM
+ * @MARBH_MODE: monitor stores the data in MARBH buffer
+ * @MIPI_MODE: monitor outputs the data through the MIPI interface
+ */
+enum iwl_fw_dbg_monitor_mode {
+	SMEM_MODE = 0,
+	EXTERNAL_MODE = 1,
+	MARBH_MODE = 2,
+	MIPI_MODE = 3,
+};
+
+/**
+ * struct iwl_fw_dbg_mem_seg_tlv - configures the debug data memory segments
+ *
+ * @data_type: the memory segment type to record
+ * @ofs: the memory segment offset
+ * @len: the memory segment length, in bytes
+ *
+ * This parses IWL_UCODE_TLV_FW_MEM_SEG
+ */
+struct iwl_fw_dbg_mem_seg_tlv {
+	__le32 data_type;
+	__le32 ofs;
+	__le32 len;
+} __packed;
+
+/**
+ * struct iwl_fw_dbg_dest_tlv_v1 - configures the destination of the debug data
+ *
+ * @version: version of the TLV - currently 0
+ * @monitor_mode: &enum iwl_fw_dbg_monitor_mode
+ * @size_power: buffer size will be 2^(size_power + 11)
+ * @base_reg: addr of the base addr register (PRPH)
+ * @end_reg:  addr of the end addr register (PRPH)
+ * @write_ptr_reg: the addr of the reg of the write pointer
+ * @wrap_count: the addr of the reg of the wrap_count
+ * @base_shift: shift right of the base addr reg
+ * @end_shift: shift right of the end addr reg
+ * @reg_ops: array of registers operations
+ *
+ * This parses IWL_UCODE_TLV_FW_DBG_DEST
+ */
+struct iwl_fw_dbg_dest_tlv_v1 {
+	u8 version;
+	u8 monitor_mode;
+	u8 size_power;
+	u8 reserved;
+	__le32 base_reg;
+	__le32 end_reg;
+	__le32 write_ptr_reg;
+	__le32 wrap_count;
+	u8 base_shift;
+	u8 end_shift;
+	struct iwl_fw_dbg_reg_op reg_ops[];
+} __packed;
+
+/* Mask of the register for defining the LDBG MAC2SMEM buffer SMEM size */
+#define IWL_LDBG_M2S_BUF_SIZE_MSK	0x0fff0000
+/* Mask of the register for defining the LDBG MAC2SMEM SMEM base address */
+#define IWL_LDBG_M2S_BUF_BA_MSK		0x00000fff
+/* The smem buffer chunks are in units of 256 bits */
+#define IWL_M2S_UNIT_SIZE			0x100
+
+struct iwl_fw_dbg_dest_tlv {
+	u8 version;
+	u8 monitor_mode;
+	u8 size_power;
+	u8 reserved;
+	__le32 cfg_reg;
+	__le32 write_ptr_reg;
+	__le32 wrap_count;
+	u8 base_shift;
+	u8 size_shift;
+	struct iwl_fw_dbg_reg_op reg_ops[];
+} __packed;
+
+struct iwl_fw_dbg_conf_hcmd {
+	u8 id;
+	u8 reserved;
+	__le16 len;
+	u8 data[];
+} __packed;
+
+/**
+ * enum iwl_fw_dbg_trigger_mode - triggers functionalities
+ *
+ * @IWL_FW_DBG_TRIGGER_START: when trigger occurs re-conf the dbg mechanism
+ * @IWL_FW_DBG_TRIGGER_STOP: when trigger occurs pull the dbg data
+ * @IWL_FW_DBG_TRIGGER_MONITOR_ONLY: when trigger occurs trigger is set to
+ *	collect only monitor data
+ */
+enum iwl_fw_dbg_trigger_mode {
+	IWL_FW_DBG_TRIGGER_START = BIT(0),
+	IWL_FW_DBG_TRIGGER_STOP = BIT(1),
+	IWL_FW_DBG_TRIGGER_MONITOR_ONLY = BIT(2),
+};
+
+/**
+ * enum iwl_fw_dbg_trigger_flags - the flags supported by wrt triggers
+ * @IWL_FW_DBG_FORCE_RESTART: force a firmware restart
+ */
+enum iwl_fw_dbg_trigger_flags {
+	IWL_FW_DBG_FORCE_RESTART = BIT(0),
+};
+
+/**
+ * enum iwl_fw_dbg_trigger_vif_type - define the VIF type for a trigger
+ * @IWL_FW_DBG_CONF_VIF_ANY: any vif type
+ * @IWL_FW_DBG_CONF_VIF_IBSS: IBSS mode
+ * @IWL_FW_DBG_CONF_VIF_STATION: BSS mode
+ * @IWL_FW_DBG_CONF_VIF_AP: AP mode
+ * @IWL_FW_DBG_CONF_VIF_P2P_CLIENT: P2P Client mode
+ * @IWL_FW_DBG_CONF_VIF_P2P_GO: P2P GO mode
+ * @IWL_FW_DBG_CONF_VIF_P2P_DEVICE: P2P device
+ */
+enum iwl_fw_dbg_trigger_vif_type {
+	IWL_FW_DBG_CONF_VIF_ANY = NL80211_IFTYPE_UNSPECIFIED,
+	IWL_FW_DBG_CONF_VIF_IBSS = NL80211_IFTYPE_ADHOC,
+	IWL_FW_DBG_CONF_VIF_STATION = NL80211_IFTYPE_STATION,
+	IWL_FW_DBG_CONF_VIF_AP = NL80211_IFTYPE_AP,
+	IWL_FW_DBG_CONF_VIF_P2P_CLIENT = NL80211_IFTYPE_P2P_CLIENT,
+	IWL_FW_DBG_CONF_VIF_P2P_GO = NL80211_IFTYPE_P2P_GO,
+	IWL_FW_DBG_CONF_VIF_P2P_DEVICE = NL80211_IFTYPE_P2P_DEVICE,
+};
+
+/**
+ * struct iwl_fw_dbg_trigger_tlv - a TLV that describes the trigger
+ * @id: &enum iwl_fw_dbg_trigger
+ * @vif_type: &enum iwl_fw_dbg_trigger_vif_type
+ * @stop_conf_ids: bitmap of configurations this trigger relates to.
+ *	if the mode is %IWL_FW_DBG_TRIGGER_STOP, then if the bit corresponding
+ *	to the currently running configuration is set, the data should be
+ *	collected.
+ * @stop_delay: how many milliseconds to wait before collecting the data
+ *	after the STOP trigger fires.
+ * @mode: &enum iwl_fw_dbg_trigger_mode - can be stop / start of both
+ * @start_conf_id: if mode is %IWL_FW_DBG_TRIGGER_START, this defines what
+ *	configuration should be applied when the triggers kicks in.
+ * @occurrences: number of occurrences. 0 means the trigger will never fire.
+ * @trig_dis_ms: the time, in milliseconds, after an occurrence of this
+ *	trigger in which another occurrence should be ignored.
+ * @flags: &enum iwl_fw_dbg_trigger_flags
+ */
+struct iwl_fw_dbg_trigger_tlv {
+	__le32 id;
+	__le32 vif_type;
+	__le32 stop_conf_ids;
+	__le32 stop_delay;
+	u8 mode;
+	u8 start_conf_id;
+	__le16 occurrences;
+	__le16 trig_dis_ms;
+	u8 flags;
+	u8 reserved[5];
+
+	u8 data[];
+} __packed;
+
+#define FW_DBG_START_FROM_ALIVE	0
+#define FW_DBG_CONF_MAX		32
+#define FW_DBG_INVALID		0xff
+
+/**
+ * struct iwl_fw_dbg_trigger_missed_bcon - configures trigger for missed beacons
+ * @stop_consec_missed_bcon: stop recording if threshold is crossed.
+ * @stop_consec_missed_bcon_since_rx: stop recording if threshold is crossed.
+ * @start_consec_missed_bcon: start recording if threshold is crossed.
+ * @start_consec_missed_bcon_since_rx: start recording if threshold is crossed.
+ * @reserved1: reserved
+ * @reserved2: reserved
+ */
+struct iwl_fw_dbg_trigger_missed_bcon {
+	__le32 stop_consec_missed_bcon;
+	__le32 stop_consec_missed_bcon_since_rx;
+	__le32 reserved2[2];
+	__le32 start_consec_missed_bcon;
+	__le32 start_consec_missed_bcon_since_rx;
+	__le32 reserved1[2];
+} __packed;
+
+/**
+ * struct iwl_fw_dbg_trigger_cmd - configures trigger for messages from FW.
+ * cmds: the list of commands to trigger the collection on
+ */
+struct iwl_fw_dbg_trigger_cmd {
+	struct cmd {
+		u8 cmd_id;
+		u8 group_id;
+	} __packed cmds[16];
+} __packed;
+
+/**
+ * iwl_fw_dbg_trigger_stats - configures trigger for statistics
+ * @stop_offset: the offset of the value to be monitored
+ * @stop_threshold: the threshold above which to collect
+ * @start_offset: the offset of the value to be monitored
+ * @start_threshold: the threshold above which to start recording
+ */
+struct iwl_fw_dbg_trigger_stats {
+	__le32 stop_offset;
+	__le32 stop_threshold;
+	__le32 start_offset;
+	__le32 start_threshold;
+} __packed;
+
+/**
+ * struct iwl_fw_dbg_trigger_low_rssi - trigger for low beacon RSSI
+ * @rssi: RSSI value to trigger at
+ */
+struct iwl_fw_dbg_trigger_low_rssi {
+	__le32 rssi;
+} __packed;
+
+/**
+ * struct iwl_fw_dbg_trigger_mlme - configures trigger for mlme events
+ * @stop_auth_denied: number of denied authentication to collect
+ * @stop_auth_timeout: number of authentication timeout to collect
+ * @stop_rx_deauth: number of Rx deauth before to collect
+ * @stop_tx_deauth: number of Tx deauth before to collect
+ * @stop_assoc_denied: number of denied association to collect
+ * @stop_assoc_timeout: number of association timeout to collect
+ * @stop_connection_loss: number of connection loss to collect
+ * @start_auth_denied: number of denied authentication to start recording
+ * @start_auth_timeout: number of authentication timeout to start recording
+ * @start_rx_deauth: number of Rx deauth to start recording
+ * @start_tx_deauth: number of Tx deauth to start recording
+ * @start_assoc_denied: number of denied association to start recording
+ * @start_assoc_timeout: number of association timeout to start recording
+ * @start_connection_loss: number of connection loss to start recording
+ */
+struct iwl_fw_dbg_trigger_mlme {
+	u8 stop_auth_denied;
+	u8 stop_auth_timeout;
+	u8 stop_rx_deauth;
+	u8 stop_tx_deauth;
+
+	u8 stop_assoc_denied;
+	u8 stop_assoc_timeout;
+	u8 stop_connection_loss;
+	u8 reserved;
+
+	u8 start_auth_denied;
+	u8 start_auth_timeout;
+	u8 start_rx_deauth;
+	u8 start_tx_deauth;
+
+	u8 start_assoc_denied;
+	u8 start_assoc_timeout;
+	u8 start_connection_loss;
+	u8 reserved2;
+} __packed;
+
+/**
+ * struct iwl_fw_dbg_trigger_txq_timer - configures the Tx queue's timer
+ * @command_queue: timeout for the command queue in ms
+ * @bss: timeout for the queues of a BSS (except for TDLS queues) in ms
+ * @softap: timeout for the queues of a softAP in ms
+ * @p2p_go: timeout for the queues of a P2P GO in ms
+ * @p2p_client: timeout for the queues of a P2P client in ms
+ * @p2p_device: timeout for the queues of a P2P device in ms
+ * @ibss: timeout for the queues of an IBSS in ms
+ * @tdls: timeout for the queues of a TDLS station in ms
+ */
+struct iwl_fw_dbg_trigger_txq_timer {
+	__le32 command_queue;
+	__le32 bss;
+	__le32 softap;
+	__le32 p2p_go;
+	__le32 p2p_client;
+	__le32 p2p_device;
+	__le32 ibss;
+	__le32 tdls;
+	__le32 reserved[4];
+} __packed;
+
+/**
+ * struct iwl_fw_dbg_trigger_time_event - configures a time event trigger
+ * time_Events: a list of tuples <id, action_bitmap>. The driver will issue a
+ *	trigger each time a time event notification that relates to time event
+ *	id with one of the actions in the bitmap is received and
+ *	BIT(notif->status) is set in status_bitmap.
+ *
+ */
+struct iwl_fw_dbg_trigger_time_event {
+	struct {
+		__le32 id;
+		__le32 action_bitmap;
+		__le32 status_bitmap;
+	} __packed time_events[16];
+} __packed;
+
+/**
+ * struct iwl_fw_dbg_trigger_ba - configures BlockAck related trigger
+ * rx_ba_start: tid bitmap to configure on what tid the trigger should occur
+ *	when an Rx BlockAck session is started.
+ * rx_ba_stop: tid bitmap to configure on what tid the trigger should occur
+ *	when an Rx BlockAck session is stopped.
+ * tx_ba_start: tid bitmap to configure on what tid the trigger should occur
+ *	when a Tx BlockAck session is started.
+ * tx_ba_stop: tid bitmap to configure on what tid the trigger should occur
+ *	when a Tx BlockAck session is stopped.
+ * rx_bar: tid bitmap to configure on what tid the trigger should occur
+ *	when a BAR is received (for a Tx BlockAck session).
+ * tx_bar: tid bitmap to configure on what tid the trigger should occur
+ *	when a BAR is send (for an Rx BlocAck session).
+ * frame_timeout: tid bitmap to configure on what tid the trigger should occur
+ *	when a frame times out in the reordering buffer.
+ */
+struct iwl_fw_dbg_trigger_ba {
+	__le16 rx_ba_start;
+	__le16 rx_ba_stop;
+	__le16 tx_ba_start;
+	__le16 tx_ba_stop;
+	__le16 rx_bar;
+	__le16 tx_bar;
+	__le16 frame_timeout;
+} __packed;
+
+/**
+ * struct iwl_fw_dbg_trigger_tdls - configures trigger for TDLS events.
+ * @action_bitmap: the TDLS action to trigger the collection upon
+ * @peer_mode: trigger on specific peer or all
+ * @peer: the TDLS peer to trigger the collection on
+ */
+struct iwl_fw_dbg_trigger_tdls {
+	u8 action_bitmap;
+	u8 peer_mode;
+	u8 peer[ETH_ALEN];
+	u8 reserved[4];
+} __packed;
+
+/**
+ * struct iwl_fw_dbg_trigger_tx_status - configures trigger for tx response
+ *  status.
+ * @statuses: the list of statuses to trigger the collection on
+ */
+struct iwl_fw_dbg_trigger_tx_status {
+	struct tx_status {
+		u8 status;
+		u8 reserved[3];
+	} __packed statuses[16];
+	__le32 reserved[2];
+} __packed;
+
+/**
+ * struct iwl_fw_dbg_conf_tlv - a TLV that describes a debug configuration.
+ * @id: conf id
+ * @usniffer: should the uSniffer image be used
+ * @num_of_hcmds: how many HCMDs to send are present here
+ * @hcmd: a variable length host command to be sent to apply the configuration.
+ *	If there is more than one HCMD to send, they will appear one after the
+ *	other and be sent in the order that they appear in.
+ * This parses IWL_UCODE_TLV_FW_DBG_CONF. The user can add up-to
+ * %FW_DBG_CONF_MAX configuration per run.
+ */
+struct iwl_fw_dbg_conf_tlv {
+	u8 id;
+	u8 usniffer;
+	u8 reserved;
+	u8 num_of_hcmds;
+	struct iwl_fw_dbg_conf_hcmd hcmd;
+} __packed;
+
+#define IWL_FW_CMD_VER_UNKNOWN 99
+
+/**
+ * struct iwl_fw_cmd_version - firmware command version entry
+ * @cmd: command ID
+ * @group: group ID
+ * @cmd_ver: command version
+ * @notif_ver: notification version
+ */
+struct iwl_fw_cmd_version {
+	u8 cmd;
+	u8 group;
+	u8 cmd_ver;
+	u8 notif_ver;
+} __packed;
+
+struct iwl_fw_tcm_error_addr {
+	__le32 addr;
+}; /* FW_TLV_TCM_ERROR_INFO_ADDRS_S */
+
+struct iwl_fw_dump_exclude {
+	__le32 addr, size;
+};
+
+static inline size_t _iwl_tlv_array_len(const struct iwl_ucode_tlv *tlv,
+					size_t fixed_size, size_t var_size)
+{
+	size_t var_len = le32_to_cpu(tlv->length) - fixed_size;
+
+	if (WARN_ON(var_len % var_size))
+		return 0;
+
+	return var_len / var_size;
+}
+
+#define iwl_tlv_array_len(_tlv_ptr, _struct_ptr, _memb)			\
+	_iwl_tlv_array_len((_tlv_ptr), sizeof(*(_struct_ptr)),		\
+			   sizeof(_struct_ptr->_memb[0]))
+
+#endif  /* __iwl_fw_file_h__ */