Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 440 insertions, 0 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs.h b/drivers/net/wireless/intel/iwlwifi/mvm/rs.h
new file mode 100644
index 000000000..b7bc8c1b2
--- /dev/null
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.h
@@ -0,0 +1,440 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2014 Intel Corporation. All rights reserved.
+ * Copyright(c) 2015 Intel Mobile Communications GmbH
+ * Copyright(c) 2017 Intel Deutschland GmbH
+ * Copyright(c) 2018 - 2019 Intel Corporation
+ *****************************************************************************/
+
+#ifndef __rs_h__
+#define __rs_h__
+
+#include <net/mac80211.h>
+
+#include "iwl-config.h"
+
+#include "fw-api.h"
+#include "iwl-trans.h"
+
+#define RS_NAME "iwl-mvm-rs"
+
+struct iwl_rs_rate_info {
+	u8 plcp;	  /* uCode API:  IWL_RATE_6M_PLCP, etc. */
+	u8 plcp_ht_siso;  /* uCode API:  IWL_RATE_SISO_6M_PLCP, etc. */
+	u8 plcp_ht_mimo2; /* uCode API:  IWL_RATE_MIMO2_6M_PLCP, etc. */
+	u8 plcp_vht_siso;
+	u8 plcp_vht_mimo2;
+	u8 prev_rs;      /* previous rate used in rs algo */
+	u8 next_rs;      /* next rate used in rs algo */
+};
+
+#define IWL_RATE_60M_PLCP 3
+
+#define LINK_QUAL_MAX_RETRY_NUM 16
+
+enum {
+	IWL_RATE_6M_INDEX_TABLE = 0,
+	IWL_RATE_9M_INDEX_TABLE,
+	IWL_RATE_12M_INDEX_TABLE,
+	IWL_RATE_18M_INDEX_TABLE,
+	IWL_RATE_24M_INDEX_TABLE,
+	IWL_RATE_36M_INDEX_TABLE,
+	IWL_RATE_48M_INDEX_TABLE,
+	IWL_RATE_54M_INDEX_TABLE,
+	IWL_RATE_1M_INDEX_TABLE,
+	IWL_RATE_2M_INDEX_TABLE,
+	IWL_RATE_5M_INDEX_TABLE,
+	IWL_RATE_11M_INDEX_TABLE,
+	IWL_RATE_INVM_INDEX_TABLE = IWL_RATE_INVM_INDEX - 1,
+};
+
+/* #define vs. enum to keep from defaulting to 'large integer' */
+#define	IWL_RATE_6M_MASK   (1 << IWL_RATE_6M_INDEX)
+#define	IWL_RATE_9M_MASK   (1 << IWL_RATE_9M_INDEX)
+#define	IWL_RATE_12M_MASK  (1 << IWL_RATE_12M_INDEX)
+#define	IWL_RATE_18M_MASK  (1 << IWL_RATE_18M_INDEX)
+#define	IWL_RATE_24M_MASK  (1 << IWL_RATE_24M_INDEX)
+#define	IWL_RATE_36M_MASK  (1 << IWL_RATE_36M_INDEX)
+#define	IWL_RATE_48M_MASK  (1 << IWL_RATE_48M_INDEX)
+#define	IWL_RATE_54M_MASK  (1 << IWL_RATE_54M_INDEX)
+#define IWL_RATE_60M_MASK  (1 << IWL_RATE_60M_INDEX)
+#define	IWL_RATE_1M_MASK   (1 << IWL_RATE_1M_INDEX)
+#define	IWL_RATE_2M_MASK   (1 << IWL_RATE_2M_INDEX)
+#define	IWL_RATE_5M_MASK   (1 << IWL_RATE_5M_INDEX)
+#define	IWL_RATE_11M_MASK  (1 << IWL_RATE_11M_INDEX)
+
+
+/* uCode API values for HT/VHT bit rates */
+enum {
+	IWL_RATE_HT_SISO_MCS_0_PLCP = 0,
+	IWL_RATE_HT_SISO_MCS_1_PLCP = 1,
+	IWL_RATE_HT_SISO_MCS_2_PLCP = 2,
+	IWL_RATE_HT_SISO_MCS_3_PLCP = 3,
+	IWL_RATE_HT_SISO_MCS_4_PLCP = 4,
+	IWL_RATE_HT_SISO_MCS_5_PLCP = 5,
+	IWL_RATE_HT_SISO_MCS_6_PLCP = 6,
+	IWL_RATE_HT_SISO_MCS_7_PLCP = 7,
+	IWL_RATE_HT_MIMO2_MCS_0_PLCP = 0x8,
+	IWL_RATE_HT_MIMO2_MCS_1_PLCP = 0x9,
+	IWL_RATE_HT_MIMO2_MCS_2_PLCP = 0xA,
+	IWL_RATE_HT_MIMO2_MCS_3_PLCP = 0xB,
+	IWL_RATE_HT_MIMO2_MCS_4_PLCP = 0xC,
+	IWL_RATE_HT_MIMO2_MCS_5_PLCP = 0xD,
+	IWL_RATE_HT_MIMO2_MCS_6_PLCP = 0xE,
+	IWL_RATE_HT_MIMO2_MCS_7_PLCP = 0xF,
+	IWL_RATE_VHT_SISO_MCS_0_PLCP = 0,
+	IWL_RATE_VHT_SISO_MCS_1_PLCP = 1,
+	IWL_RATE_VHT_SISO_MCS_2_PLCP = 2,
+	IWL_RATE_VHT_SISO_MCS_3_PLCP = 3,
+	IWL_RATE_VHT_SISO_MCS_4_PLCP = 4,
+	IWL_RATE_VHT_SISO_MCS_5_PLCP = 5,
+	IWL_RATE_VHT_SISO_MCS_6_PLCP = 6,
+	IWL_RATE_VHT_SISO_MCS_7_PLCP = 7,
+	IWL_RATE_VHT_SISO_MCS_8_PLCP = 8,
+	IWL_RATE_VHT_SISO_MCS_9_PLCP = 9,
+	IWL_RATE_VHT_MIMO2_MCS_0_PLCP = 0x10,
+	IWL_RATE_VHT_MIMO2_MCS_1_PLCP = 0x11,
+	IWL_RATE_VHT_MIMO2_MCS_2_PLCP = 0x12,
+	IWL_RATE_VHT_MIMO2_MCS_3_PLCP = 0x13,
+	IWL_RATE_VHT_MIMO2_MCS_4_PLCP = 0x14,
+	IWL_RATE_VHT_MIMO2_MCS_5_PLCP = 0x15,
+	IWL_RATE_VHT_MIMO2_MCS_6_PLCP = 0x16,
+	IWL_RATE_VHT_MIMO2_MCS_7_PLCP = 0x17,
+	IWL_RATE_VHT_MIMO2_MCS_8_PLCP = 0x18,
+	IWL_RATE_VHT_MIMO2_MCS_9_PLCP = 0x19,
+	IWL_RATE_HT_SISO_MCS_INV_PLCP,
+	IWL_RATE_HT_MIMO2_MCS_INV_PLCP = IWL_RATE_HT_SISO_MCS_INV_PLCP,
+	IWL_RATE_VHT_SISO_MCS_INV_PLCP = IWL_RATE_HT_SISO_MCS_INV_PLCP,
+	IWL_RATE_VHT_MIMO2_MCS_INV_PLCP = IWL_RATE_HT_SISO_MCS_INV_PLCP,
+	IWL_RATE_HT_SISO_MCS_8_PLCP = IWL_RATE_HT_SISO_MCS_INV_PLCP,
+	IWL_RATE_HT_SISO_MCS_9_PLCP = IWL_RATE_HT_SISO_MCS_INV_PLCP,
+	IWL_RATE_HT_MIMO2_MCS_8_PLCP = IWL_RATE_HT_SISO_MCS_INV_PLCP,
+	IWL_RATE_HT_MIMO2_MCS_9_PLCP = IWL_RATE_HT_SISO_MCS_INV_PLCP,
+};
+
+#define IWL_RATES_MASK ((1 << IWL_RATE_COUNT) - 1)
+
+#define IWL_INVALID_VALUE    -1
+
+#define TPC_MAX_REDUCTION		15
+#define TPC_NO_REDUCTION		0
+#define TPC_INVALID			0xff
+
+#define LINK_QUAL_AGG_FRAME_LIMIT_DEF	(63)
+#define LINK_QUAL_AGG_FRAME_LIMIT_MAX	(63)
+/*
+ * FIXME - various places in firmware API still use u8,
+ * e.g. LQ command and SCD config command.
+ * This should be 256 instead.
+ */
+#define LINK_QUAL_AGG_FRAME_LIMIT_GEN2_DEF	(255)
+#define LINK_QUAL_AGG_FRAME_LIMIT_GEN2_MAX	(255)
+#define LINK_QUAL_AGG_FRAME_LIMIT_MIN	(0)
+
+#define LQ_SIZE		2	/* 2 mode tables:  "Active" and "Search" */
+
+/* load per tid defines for A-MPDU activation */
+#define IWL_AGG_TPT_THREHOLD	0
+#define IWL_AGG_ALL_TID		0xff
+
+enum iwl_table_type {
+	LQ_NONE,
+	LQ_LEGACY_G,	/* legacy types */
+	LQ_LEGACY_A,
+	LQ_HT_SISO,	/* HT types */
+	LQ_HT_MIMO2,
+	LQ_VHT_SISO,    /* VHT types */
+	LQ_VHT_MIMO2,
+	LQ_HE_SISO,     /* HE types */
+	LQ_HE_MIMO2,
+	LQ_MAX,
+};
+
+struct rs_rate {
+	int index;
+	enum iwl_table_type type;
+	u8 ant;
+	u32 bw;
+	bool sgi;
+	bool ldpc;
+	bool stbc;
+	bool bfer;
+};
+
+
+#define is_type_legacy(type) (((type) == LQ_LEGACY_G) || \
+			      ((type) == LQ_LEGACY_A))
+#define is_type_ht_siso(type) ((type) == LQ_HT_SISO)
+#define is_type_ht_mimo2(type) ((type) == LQ_HT_MIMO2)
+#define is_type_vht_siso(type) ((type) == LQ_VHT_SISO)
+#define is_type_vht_mimo2(type) ((type) == LQ_VHT_MIMO2)
+#define is_type_he_siso(type) ((type) == LQ_HE_SISO)
+#define is_type_he_mimo2(type) ((type) == LQ_HE_MIMO2)
+#define is_type_siso(type) (is_type_ht_siso(type) || is_type_vht_siso(type) || \
+			    is_type_he_siso(type))
+#define is_type_mimo2(type) (is_type_ht_mimo2(type) || \
+			     is_type_vht_mimo2(type) || is_type_he_mimo2(type))
+#define is_type_mimo(type) (is_type_mimo2(type))
+#define is_type_ht(type) (is_type_ht_siso(type) || is_type_ht_mimo2(type))
+#define is_type_vht(type) (is_type_vht_siso(type) || is_type_vht_mimo2(type))
+#define is_type_he(type) (is_type_he_siso(type) || is_type_he_mimo2(type))
+#define is_type_a_band(type) ((type) == LQ_LEGACY_A)
+#define is_type_g_band(type) ((type) == LQ_LEGACY_G)
+
+#define is_legacy(rate)       is_type_legacy((rate)->type)
+#define is_ht_siso(rate)      is_type_ht_siso((rate)->type)
+#define is_ht_mimo2(rate)     is_type_ht_mimo2((rate)->type)
+#define is_vht_siso(rate)     is_type_vht_siso((rate)->type)
+#define is_vht_mimo2(rate)    is_type_vht_mimo2((rate)->type)
+#define is_siso(rate)         is_type_siso((rate)->type)
+#define is_mimo2(rate)        is_type_mimo2((rate)->type)
+#define is_mimo(rate)         is_type_mimo((rate)->type)
+#define is_ht(rate)           is_type_ht((rate)->type)
+#define is_vht(rate)          is_type_vht((rate)->type)
+#define is_he(rate)           is_type_he((rate)->type)
+#define is_a_band(rate)       is_type_a_band((rate)->type)
+#define is_g_band(rate)       is_type_g_band((rate)->type)
+
+#define is_ht20(rate)         ((rate)->bw == RATE_MCS_CHAN_WIDTH_20)
+#define is_ht40(rate)         ((rate)->bw == RATE_MCS_CHAN_WIDTH_40)
+#define is_ht80(rate)         ((rate)->bw == RATE_MCS_CHAN_WIDTH_80)
+#define is_ht160(rate)        ((rate)->bw == RATE_MCS_CHAN_WIDTH_160)
+
+/**
+ * struct iwl_lq_sta_rs_fw - rate and related statistics for RS in FW
+ * @last_rate_n_flags: last rate reported by FW
+ * @sta_id: the id of the station
+#ifdef CONFIG_MAC80211_DEBUGFS
+ * @dbg_fixed_rate: for debug, use fixed rate if not 0
+ * @dbg_agg_frame_count_lim: for debug, max number of frames in A-MPDU
+#endif
+ * @chains: bitmask of chains reported in %chain_signal
+ * @chain_signal: per chain signal strength
+ * @last_rssi: last rssi reported
+ * @drv: pointer back to the driver data
+ */
+
+struct iwl_lq_sta_rs_fw {
+	/* last tx rate_n_flags */
+	u32 last_rate_n_flags;
+
+	/* persistent fields - initialized only once - keep last! */
+	struct lq_sta_pers_rs_fw {
+		u32 sta_id;
+#ifdef CONFIG_MAC80211_DEBUGFS
+		u32 dbg_fixed_rate;
+		u16 dbg_agg_frame_count_lim;
+#endif
+		u8 chains;
+		s8 chain_signal[IEEE80211_MAX_CHAINS];
+		s8 last_rssi;
+		struct iwl_mvm *drv;
+	} pers;
+};
+
+/**
+ * struct iwl_rate_scale_data -- tx success history for one rate
+ */
+struct iwl_rate_scale_data {
+	u64 data;		/* bitmap of successful frames */
+	s32 success_counter;	/* number of frames successful */
+	s32 success_ratio;	/* per-cent * 128  */
+	s32 counter;		/* number of frames attempted */
+	s32 average_tpt;	/* success ratio * expected throughput */
+};
+
+/* Possible Tx columns
+ * Tx Column = a combo of legacy/siso/mimo x antenna x SGI
+ */
+enum rs_column {
+	RS_COLUMN_LEGACY_ANT_A = 0,
+	RS_COLUMN_LEGACY_ANT_B,
+	RS_COLUMN_SISO_ANT_A,
+	RS_COLUMN_SISO_ANT_B,
+	RS_COLUMN_SISO_ANT_A_SGI,
+	RS_COLUMN_SISO_ANT_B_SGI,
+	RS_COLUMN_MIMO2,
+	RS_COLUMN_MIMO2_SGI,
+
+	RS_COLUMN_LAST = RS_COLUMN_MIMO2_SGI,
+	RS_COLUMN_COUNT = RS_COLUMN_LAST + 1,
+	RS_COLUMN_INVALID,
+};
+
+enum rs_ss_force_opt {
+	RS_SS_FORCE_NONE = 0,
+	RS_SS_FORCE_STBC,
+	RS_SS_FORCE_BFER,
+	RS_SS_FORCE_SISO,
+};
+
+/* Packet stats per rate */
+struct rs_rate_stats {
+	u64 success;
+	u64 total;
+};
+
+/**
+ * struct iwl_scale_tbl_info -- tx params and success history for all rates
+ *
+ * There are two of these in struct iwl_lq_sta,
+ * one for "active", and one for "search".
+ */
+struct iwl_scale_tbl_info {
+	struct rs_rate rate;
+	enum rs_column column;
+	const u16 *expected_tpt;	/* throughput metrics; expected_tpt_G, etc. */
+	struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */
+	/* per txpower-reduction history */
+	struct iwl_rate_scale_data tpc_win[TPC_MAX_REDUCTION + 1];
+};
+
+enum {
+	RS_STATE_SEARCH_CYCLE_STARTED,
+	RS_STATE_SEARCH_CYCLE_ENDED,
+	RS_STATE_STAY_IN_COLUMN,
+};
+
+/**
+ * struct iwl_lq_sta -- driver's rate scaling private structure
+ *
+ * Pointer to this gets passed back and forth between driver and mac80211.
+ */
+struct iwl_lq_sta {
+	u8 active_tbl;		/* index of active table, range 0-1 */
+	u8 rs_state;            /* RS_STATE_* */
+	u8 search_better_tbl;	/* 1: currently trying alternate mode */
+	s32 last_tpt;
+
+	/* The following determine when to search for a new mode */
+	u32 table_count_limit;
+	u32 max_failure_limit;	/* # failed frames before new search */
+	u32 max_success_limit;	/* # successful frames before new search */
+	u32 table_count;
+	u32 total_failed;	/* total failed frames, any/all rates */
+	u32 total_success;	/* total successful frames, any/all rates */
+	u64 flush_timer;	/* time staying in mode before new search */
+
+	u32 visited_columns;    /* Bitmask marking which Tx columns were
+				 * explored during a search cycle
+				 */
+	u64 last_tx;
+	bool is_vht;
+	bool ldpc;              /* LDPC Rx is supported by the STA */
+	bool stbc_capable;      /* Tx STBC is supported by chip and Rx by STA */
+	bool bfer_capable;      /* Remote supports beamformee and we BFer */
+
+	enum nl80211_band band;
+
+	/* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */
+	unsigned long active_legacy_rate;
+	unsigned long active_siso_rate;
+	unsigned long active_mimo2_rate;
+
+	/* Highest rate per Tx mode */
+	u8 max_legacy_rate_idx;
+	u8 max_siso_rate_idx;
+	u8 max_mimo2_rate_idx;
+
+	/* Optimal rate based on RSSI and STA caps.
+	 * Used only to reflect link speed to userspace.
+	 */
+	struct rs_rate optimal_rate;
+	unsigned long optimal_rate_mask;
+	const struct rs_init_rate_info *optimal_rates;
+	int optimal_nentries;
+
+	u8 missed_rate_counter;
+
+	struct iwl_lq_cmd lq;
+	struct iwl_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */
+	u8 tx_agg_tid_en;
+
+	/* last tx rate_n_flags */
+	u32 last_rate_n_flags;
+	/* packets destined for this STA are aggregated */
+	u8 is_agg;
+
+	/* tx power reduce for this sta */
+	int tpc_reduce;
+
+	/* persistent fields - initialized only once - keep last! */
+	struct lq_sta_pers {
+#ifdef CONFIG_MAC80211_DEBUGFS
+		u32 dbg_fixed_rate;
+		u8 dbg_fixed_txp_reduction;
+
+		/* force STBC/BFER/SISO for testing */
+		enum rs_ss_force_opt ss_force;
+#endif
+		u8 chains;
+		s8 chain_signal[IEEE80211_MAX_CHAINS];
+		s8 last_rssi;
+		struct rs_rate_stats tx_stats[RS_COLUMN_COUNT][IWL_RATE_COUNT];
+		struct iwl_mvm *drv;
+		spinlock_t lock; /* for races in reinit/update table */
+	} pers;
+};
+
+/* ieee80211_tx_info's status_driver_data[0] is packed with lq color and txp
+ * Note, it's iwlmvm <-> mac80211 interface.
+ * bits 0-7: reduced tx power
+ * bits 8-10: LQ command's color
+ */
+#define RS_DRV_DATA_TXP_MSK 0xff
+#define RS_DRV_DATA_LQ_COLOR_POS 8
+#define RS_DRV_DATA_LQ_COLOR_MSK (7 << RS_DRV_DATA_LQ_COLOR_POS)
+#define RS_DRV_DATA_LQ_COLOR_GET(_f) (((_f) & RS_DRV_DATA_LQ_COLOR_MSK) >>\
+				      RS_DRV_DATA_LQ_COLOR_POS)
+#define RS_DRV_DATA_PACK(_c, _p) ((void *)(uintptr_t)\
+				  (((uintptr_t)_p) |\
+				   ((_c) << RS_DRV_DATA_LQ_COLOR_POS)))
+
+/* Initialize station's rate scaling information after adding station */
+void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
+			  enum nl80211_band band, bool init);
+
+/* Notify RS about Tx status */
+void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
+			  int tid, struct ieee80211_tx_info *info, bool ndp);
+
+/**
+ * iwl_rate_control_register - Register the rate control algorithm callbacks
+ *
+ * Since the rate control algorithm is hardware specific, there is no need
+ * or reason to place it as a stand alone module.  The driver can call
+ * iwl_rate_control_register in order to register the rate control callbacks
+ * with the mac80211 subsystem.  This should be performed prior to calling
+ * ieee80211_register_hw
+ *
+ */
+int iwl_mvm_rate_control_register(void);
+
+/**
+ * iwl_rate_control_unregister - Unregister the rate control callbacks
+ *
+ * This should be called after calling ieee80211_unregister_hw, but before
+ * the driver is unloaded.
+ */
+void iwl_mvm_rate_control_unregister(void);
+
+struct iwl_mvm_sta;
+
+int iwl_mvm_tx_protection(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta,
+			  bool enable);
+
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+void iwl_mvm_reset_frame_stats(struct iwl_mvm *mvm);
+#endif
+
+void iwl_mvm_rs_add_sta(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta);
+void rs_fw_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
+		     enum nl80211_band band, bool update);
+int rs_fw_tx_protection(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta,
+			bool enable);
+void iwl_mvm_tlc_update_notif(struct iwl_mvm *mvm,
+			      struct iwl_rx_cmd_buffer *rxb);
+
+u16 rs_fw_get_max_amsdu_len(struct ieee80211_sta *sta);
+#endif /* __rs__ */