Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 352 insertions, 0 deletions

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
new file mode 100644
index 000000000..0422c3323
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
@@ -0,0 +1,352 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#include "mt76x0.h"
+#include "mcu.h"
+#include "../mt76x02_usb.h"
+
+static struct usb_device_id mt76x0_device_table[] = {
+	{ USB_DEVICE(0x148F, 0x7610) },	/* MT7610U */
+	{ USB_DEVICE(0x13B1, 0x003E) },	/* Linksys AE6000 */
+	{ USB_DEVICE(0x0E8D, 0x7610) },	/* Sabrent NTWLAC */
+	{ USB_DEVICE(0x7392, 0xa711) },	/* Edimax 7711mac */
+	{ USB_DEVICE(0x7392, 0xb711) },	/* Edimax / Elecom  */
+	{ USB_DEVICE(0x148f, 0x761a) },	/* TP-Link TL-WDN5200 */
+	{ USB_DEVICE(0x148f, 0x760a) },	/* TP-Link unknown */
+	{ USB_DEVICE(0x0b05, 0x17d1) },	/* Asus USB-AC51 */
+	{ USB_DEVICE(0x0b05, 0x17db) },	/* Asus USB-AC50 */
+	{ USB_DEVICE(0x0df6, 0x0075) },	/* Sitecom WLA-3100 */
+	{ USB_DEVICE(0x2019, 0xab31) },	/* Planex GW-450D */
+	{ USB_DEVICE(0x2001, 0x3d02) },	/* D-LINK DWA-171 rev B1 */
+	{ USB_DEVICE(0x0586, 0x3425) },	/* Zyxel NWD6505 */
+	{ USB_DEVICE(0x07b8, 0x7610) },	/* AboCom AU7212 */
+	{ USB_DEVICE(0x04bb, 0x0951) },	/* I-O DATA WN-AC433UK */
+	{ USB_DEVICE(0x057c, 0x8502) },	/* AVM FRITZ!WLAN USB Stick AC 430 */
+	{ USB_DEVICE(0x293c, 0x5702) },	/* Comcast Xfinity KXW02AAA  */
+	{ USB_DEVICE(0x20f4, 0x806b) },	/* TRENDnet TEW-806UBH  */
+	{ USB_DEVICE(0x7392, 0xc711) }, /* Devolo Wifi ac Stick */
+	{ USB_DEVICE(0x0df6, 0x0079) }, /* Sitecom Europe B.V. ac  Stick */
+	{ USB_DEVICE(0x2357, 0x0123) }, /* TP-LINK T2UHP_US_v1 */
+	{ USB_DEVICE(0x2357, 0x010b) }, /* TP-LINK T2UHP_UN_v1 */
+	/* TP-LINK Archer T1U */
+	{ USB_DEVICE(0x2357, 0x0105), .driver_info = 1, },
+	/* MT7630U */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x0E8D, 0x7630, 0xff, 0x2, 0xff)},
+	/* MT7650U */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x0E8D, 0x7650, 0xff, 0x2, 0xff)},
+	{ 0, }
+};
+
+static void mt76x0_init_usb_dma(struct mt76x02_dev *dev)
+{
+	u32 val;
+
+	val = mt76_rr(dev, MT_USB_DMA_CFG);
+
+	val |= MT_USB_DMA_CFG_RX_BULK_EN |
+	       MT_USB_DMA_CFG_TX_BULK_EN;
+
+	/* disable AGGR_BULK_RX in order to receive one
+	 * frame in each rx urb and avoid copies
+	 */
+	val &= ~MT_USB_DMA_CFG_RX_BULK_AGG_EN;
+	mt76_wr(dev, MT_USB_DMA_CFG, val);
+
+	val = mt76_rr(dev, MT_COM_REG0);
+	if (val & 1)
+		dev_dbg(dev->mt76.dev, "MCU not ready\n");
+
+	val = mt76_rr(dev, MT_USB_DMA_CFG);
+
+	val |= MT_USB_DMA_CFG_RX_DROP_OR_PAD;
+	mt76_wr(dev, MT_USB_DMA_CFG, val);
+	val &= ~MT_USB_DMA_CFG_RX_DROP_OR_PAD;
+	mt76_wr(dev, MT_USB_DMA_CFG, val);
+}
+
+static void mt76x0u_cleanup(struct mt76x02_dev *dev)
+{
+	clear_bit(MT76_STATE_INITIALIZED, &dev->mphy.state);
+	mt76x0_chip_onoff(dev, false, false);
+	mt76u_queues_deinit(&dev->mt76);
+}
+
+static void mt76x0u_stop(struct ieee80211_hw *hw)
+{
+	struct mt76x02_dev *dev = hw->priv;
+
+	clear_bit(MT76_STATE_RUNNING, &dev->mphy.state);
+	cancel_delayed_work_sync(&dev->cal_work);
+	cancel_delayed_work_sync(&dev->mphy.mac_work);
+	mt76u_stop_tx(&dev->mt76);
+	mt76x02u_exit_beacon_config(dev);
+
+	if (test_bit(MT76_REMOVED, &dev->mphy.state))
+		return;
+
+	if (!mt76_poll(dev, MT_USB_DMA_CFG, MT_USB_DMA_CFG_TX_BUSY, 0, 1000))
+		dev_warn(dev->mt76.dev, "TX DMA did not stop\n");
+
+	mt76x0_mac_stop(dev);
+
+	if (!mt76_poll(dev, MT_USB_DMA_CFG, MT_USB_DMA_CFG_RX_BUSY, 0, 1000))
+		dev_warn(dev->mt76.dev, "RX DMA did not stop\n");
+}
+
+static int mt76x0u_start(struct ieee80211_hw *hw)
+{
+	struct mt76x02_dev *dev = hw->priv;
+	int ret;
+
+	ret = mt76x02u_mac_start(dev);
+	if (ret)
+		return ret;
+
+	mt76x0_phy_calibrate(dev, true);
+	ieee80211_queue_delayed_work(dev->mt76.hw, &dev->mphy.mac_work,
+				     MT_MAC_WORK_INTERVAL);
+	ieee80211_queue_delayed_work(dev->mt76.hw, &dev->cal_work,
+				     MT_CALIBRATE_INTERVAL);
+	set_bit(MT76_STATE_RUNNING, &dev->mphy.state);
+	return 0;
+}
+
+static const struct ieee80211_ops mt76x0u_ops = {
+	.tx = mt76x02_tx,
+	.start = mt76x0u_start,
+	.stop = mt76x0u_stop,
+	.add_interface = mt76x02_add_interface,
+	.remove_interface = mt76x02_remove_interface,
+	.config = mt76x0_config,
+	.configure_filter = mt76x02_configure_filter,
+	.bss_info_changed = mt76x02_bss_info_changed,
+	.sta_state = mt76_sta_state,
+	.sta_pre_rcu_remove = mt76_sta_pre_rcu_remove,
+	.set_key = mt76x02_set_key,
+	.conf_tx = mt76x02_conf_tx,
+	.sw_scan_start = mt76_sw_scan,
+	.sw_scan_complete = mt76x02_sw_scan_complete,
+	.ampdu_action = mt76x02_ampdu_action,
+	.sta_rate_tbl_update = mt76x02_sta_rate_tbl_update,
+	.set_rts_threshold = mt76x02_set_rts_threshold,
+	.wake_tx_queue = mt76_wake_tx_queue,
+	.get_txpower = mt76_get_txpower,
+	.get_survey = mt76_get_survey,
+	.set_tim = mt76_set_tim,
+	.release_buffered_frames = mt76_release_buffered_frames,
+	.get_antenna = mt76_get_antenna,
+	.set_sar_specs = mt76x0_set_sar_specs,
+};
+
+static int mt76x0u_init_hardware(struct mt76x02_dev *dev, bool reset)
+{
+	int err;
+
+	mt76x0_chip_onoff(dev, true, reset);
+
+	if (!mt76x02_wait_for_mac(&dev->mt76))
+		return -ETIMEDOUT;
+
+	err = mt76x0u_mcu_init(dev);
+	if (err < 0)
+		return err;
+
+	mt76x0_init_usb_dma(dev);
+	err = mt76x0_init_hardware(dev);
+	if (err < 0)
+		return err;
+
+	mt76x02u_init_beacon_config(dev);
+
+	mt76_rmw(dev, MT_US_CYC_CFG, MT_US_CYC_CNT, 0x1e);
+	mt76_wr(dev, MT_TXOP_CTRL_CFG,
+		FIELD_PREP(MT_TXOP_TRUN_EN, 0x3f) |
+		FIELD_PREP(MT_TXOP_EXT_CCA_DLY, 0x58));
+
+	return 0;
+}
+
+static int mt76x0u_register_device(struct mt76x02_dev *dev)
+{
+	struct ieee80211_hw *hw = dev->mt76.hw;
+	struct mt76_usb *usb = &dev->mt76.usb;
+	int err;
+
+	usb->mcu.data = devm_kmalloc(dev->mt76.dev, MCU_RESP_URB_SIZE,
+				     GFP_KERNEL);
+	if (!usb->mcu.data)
+		return -ENOMEM;
+
+	err = mt76u_alloc_queues(&dev->mt76);
+	if (err < 0)
+		goto out_err;
+
+	err = mt76x0u_init_hardware(dev, true);
+	if (err < 0)
+		goto out_err;
+
+	/* check hw sg support in order to enable AMSDU */
+	hw->max_tx_fragments = dev->mt76.usb.sg_en ? MT_TX_SG_MAX_SIZE : 1;
+	err = mt76x0_register_device(dev);
+	if (err < 0)
+		goto out_err;
+
+	set_bit(MT76_STATE_INITIALIZED, &dev->mphy.state);
+
+	return 0;
+
+out_err:
+	mt76x0u_cleanup(dev);
+	return err;
+}
+
+static int mt76x0u_probe(struct usb_interface *usb_intf,
+			 const struct usb_device_id *id)
+{
+	static const struct mt76_driver_ops drv_ops = {
+		.drv_flags = MT_DRV_SW_RX_AIRTIME,
+		.survey_flags = SURVEY_INFO_TIME_TX,
+		.update_survey = mt76x02_update_channel,
+		.tx_prepare_skb = mt76x02u_tx_prepare_skb,
+		.tx_complete_skb = mt76x02u_tx_complete_skb,
+		.tx_status_data = mt76x02_tx_status_data,
+		.rx_skb = mt76x02_queue_rx_skb,
+		.sta_ps = mt76x02_sta_ps,
+		.sta_add = mt76x02_sta_add,
+		.sta_remove = mt76x02_sta_remove,
+	};
+	struct usb_device *usb_dev = interface_to_usbdev(usb_intf);
+	struct mt76x02_dev *dev;
+	struct mt76_dev *mdev;
+	u32 mac_rev;
+	int ret;
+
+	mdev = mt76_alloc_device(&usb_intf->dev, sizeof(*dev), &mt76x0u_ops,
+				 &drv_ops);
+	if (!mdev)
+		return -ENOMEM;
+
+	dev = container_of(mdev, struct mt76x02_dev, mt76);
+	mutex_init(&dev->phy_mutex);
+
+	/* Quirk for Archer T1U */
+	if (id->driver_info)
+		dev->no_2ghz = true;
+
+	usb_dev = usb_get_dev(usb_dev);
+	usb_reset_device(usb_dev);
+
+	usb_set_intfdata(usb_intf, dev);
+
+	mt76x02u_init_mcu(mdev);
+	ret = mt76u_init(mdev, usb_intf);
+	if (ret)
+		goto err;
+
+	/* Disable the HW, otherwise MCU fail to initialize on hot reboot */
+	mt76x0_chip_onoff(dev, false, false);
+
+	if (!mt76x02_wait_for_mac(mdev)) {
+		ret = -ETIMEDOUT;
+		goto err;
+	}
+
+	mdev->rev = mt76_rr(dev, MT_ASIC_VERSION);
+	mac_rev = mt76_rr(dev, MT_MAC_CSR0);
+	dev_info(mdev->dev, "ASIC revision: %08x MAC revision: %08x\n",
+		 mdev->rev, mac_rev);
+	if (!is_mt76x0(dev)) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	/* Note: vendor driver skips this check for MT76X0U */
+	if (!(mt76_rr(dev, MT_EFUSE_CTRL) & MT_EFUSE_CTRL_SEL))
+		dev_warn(mdev->dev, "Warning: eFUSE not present\n");
+
+	ret = mt76x0u_register_device(dev);
+	if (ret < 0)
+		goto err;
+
+	return 0;
+
+err:
+	usb_set_intfdata(usb_intf, NULL);
+	usb_put_dev(interface_to_usbdev(usb_intf));
+	mt76u_queues_deinit(&dev->mt76);
+	mt76_free_device(&dev->mt76);
+
+	return ret;
+}
+
+static void mt76x0_disconnect(struct usb_interface *usb_intf)
+{
+	struct mt76x02_dev *dev = usb_get_intfdata(usb_intf);
+	bool initialized = test_bit(MT76_STATE_INITIALIZED, &dev->mphy.state);
+
+	if (!initialized)
+		return;
+
+	ieee80211_unregister_hw(dev->mt76.hw);
+	mt76x0u_cleanup(dev);
+
+	usb_set_intfdata(usb_intf, NULL);
+	usb_put_dev(interface_to_usbdev(usb_intf));
+
+	mt76_free_device(&dev->mt76);
+}
+
+static int __maybe_unused mt76x0_suspend(struct usb_interface *usb_intf,
+					 pm_message_t state)
+{
+	struct mt76x02_dev *dev = usb_get_intfdata(usb_intf);
+
+	mt76u_stop_rx(&dev->mt76);
+	clear_bit(MT76_STATE_MCU_RUNNING, &dev->mphy.state);
+	mt76x0_chip_onoff(dev, false, false);
+
+	return 0;
+}
+
+static int __maybe_unused mt76x0_resume(struct usb_interface *usb_intf)
+{
+	struct mt76x02_dev *dev = usb_get_intfdata(usb_intf);
+	int ret;
+
+	ret = mt76u_resume_rx(&dev->mt76);
+	if (ret < 0)
+		goto err;
+
+	ret = mt76x0u_init_hardware(dev, false);
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	mt76x0u_cleanup(dev);
+	return ret;
+}
+
+MODULE_DEVICE_TABLE(usb, mt76x0_device_table);
+MODULE_FIRMWARE(MT7610E_FIRMWARE);
+MODULE_FIRMWARE(MT7610U_FIRMWARE);
+MODULE_LICENSE("GPL");
+
+static struct usb_driver mt76x0_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= mt76x0_device_table,
+	.probe		= mt76x0u_probe,
+	.disconnect	= mt76x0_disconnect,
+	.suspend	= mt76x0_suspend,
+	.resume		= mt76x0_resume,
+	.reset_resume	= mt76x0_resume,
+	.soft_unbind	= 1,
+	.disable_hub_initiated_lpm = 1,
+};
+module_usb_driver(mt76x0_driver);