diff options
| author |  Linus Torvalds <torvalds@linux-foundation.org> | 2023-02-21 18:24:12 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-02-21 18:24:12 -0800 |
| commit | 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 (patch) | |
| tree | cc5c2d0a898769fd59549594fedb3ee6f84e59a0 /drivers/net/wireless/microchip/wilc1000/wlan_if.h | |
| download | linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.tar.gz linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.zip | |
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
Diffstat (limited to 'drivers/net/wireless/microchip/wilc1000/wlan_if.h')
| -rw-r--r-- | drivers/net/wireless/microchip/wilc1000/wlan_if.h | 812 |
1 files changed, 812 insertions, 0 deletions
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan_if.h b/drivers/net/wireless/microchip/wilc1000/wlan_if.h new file mode 100644 index 000000000..df2f5a63b --- /dev/null +++ b/drivers/net/wireless/microchip/wilc1000/wlan_if.h @@ -0,0 +1,812 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries. + * All rights reserved. + */ + +#ifndef WILC_WLAN_IF_H +#define WILC_WLAN_IF_H + +#include <linux/netdevice.h> +#include "fw.h" + +/******************************************** + * + * Wlan Configuration ID + * + ********************************************/ + +enum bss_types { + WILC_FW_BSS_TYPE_INFRA = 0, + WILC_FW_BSS_TYPE_INDEPENDENT, + WILC_FW_BSS_TYPE_AP, +}; + +enum { + WILC_FW_OPER_MODE_B_ONLY = 0, /* 1, 2 M, otherwise 5, 11 M */ + WILC_FW_OPER_MODE_G_ONLY, /* 6,12,24 otherwise 9,18,36,48,54 */ + WILC_FW_OPER_MODE_G_MIXED_11B_1, /* 1,2,5.5,11 otherwise all on */ + WILC_FW_OPER_MODE_G_MIXED_11B_2, /* 1,2,5,11,6,12,24 otherwise all on */ +}; + +enum { + WILC_FW_PREAMBLE_SHORT = 0, /* Short Preamble */ + WILC_FW_PREAMBLE_LONG = 1, /* Long Preamble */ + WILC_FW_PREAMBLE_AUTO = 2, /* Auto Preamble Selection */ +}; + +enum { + WILC_FW_PASSIVE_SCAN = 0, + WILC_FW_ACTIVE_SCAN = 1, +}; + +enum { + WILC_FW_NO_POWERSAVE = 0, + WILC_FW_MIN_FAST_PS = 1, + WILC_FW_MAX_FAST_PS = 2, + WILC_FW_MIN_PSPOLL_PS = 3, + WILC_FW_MAX_PSPOLL_PS = 4 +}; + +enum bus_acquire { + WILC_BUS_ACQUIRE_ONLY = 0, + WILC_BUS_ACQUIRE_AND_WAKEUP = 1, +}; + +enum bus_release { + WILC_BUS_RELEASE_ONLY = 0, + WILC_BUS_RELEASE_ALLOW_SLEEP = 1, +}; + +enum { + WILC_FW_NO_ENCRYPT = 0, + WILC_FW_ENCRYPT_ENABLED = BIT(0), + WILC_FW_WEP = BIT(1), + WILC_FW_WEP_EXTENDED = BIT(2), + WILC_FW_WPA = BIT(3), + WILC_FW_WPA2 = BIT(4), + WILC_FW_AES = BIT(5), + WILC_FW_TKIP = BIT(6) +}; + +enum { + WILC_FW_SEC_NO = WILC_FW_NO_ENCRYPT, + WILC_FW_SEC_WEP = WILC_FW_WEP | WILC_FW_ENCRYPT_ENABLED, + WILC_FW_SEC_WEP_EXTENDED = WILC_FW_WEP_EXTENDED | WILC_FW_SEC_WEP, + WILC_FW_SEC_WPA = WILC_FW_WPA | WILC_FW_ENCRYPT_ENABLED, + WILC_FW_SEC_WPA_AES = WILC_FW_AES | WILC_FW_SEC_WPA, + WILC_FW_SEC_WPA_TKIP = WILC_FW_TKIP | WILC_FW_SEC_WPA, + WILC_FW_SEC_WPA2 = WILC_FW_WPA2 | WILC_FW_ENCRYPT_ENABLED, + WILC_FW_SEC_WPA2_AES = WILC_FW_AES | WILC_FW_SEC_WPA2, + WILC_FW_SEC_WPA2_TKIP = WILC_FW_TKIP | WILC_FW_SEC_WPA2 +}; + +enum authtype { + WILC_FW_AUTH_OPEN_SYSTEM = 1, + WILC_FW_AUTH_SHARED_KEY = 2, + WILC_FW_AUTH_ANY = 3, + WILC_FW_AUTH_IEEE8021 = 5, + WILC_FW_AUTH_SAE = 7, + WILC_FW_AUTH_IEE8021X_SHA256 = 9, + WILC_FW_AUTH_OPEN_SYSTEM_SHA256 = 13 +}; + +enum mfptype { + WILC_FW_MFP_NONE = 0x0, + WILC_FW_MFP_OPTIONAL = 0x1, + WILC_FW_MFP_REQUIRED = 0x2 +}; + +enum site_survey { + WILC_FW_SITE_SURVEY_1CH = 0, + WILC_FW_SITE_SURVEY_ALL_CH = 1, + WILC_FW_SITE_SURVEY_OFF = 2 +}; + +enum { + WILC_FW_ACK_POLICY_NORMAL = 0, + WILC_FW_ACK_NO_POLICY, +}; + +enum { + WILC_FW_REKEY_POLICY_DISABLE = 1, + WILC_FW_REKEY_POLICY_TIME_BASE, + WILC_FW_REKEY_POLICY_PKT_BASE, + WILC_FW_REKEY_POLICY_TIME_PKT_BASE +}; + +enum { + WILC_FW_FILTER_NO = 0x00, + WILC_FW_FILTER_AP_ONLY = 0x01, + WILC_FW_FILTER_STA_ONLY = 0x02 +}; + +enum { + WILC_FW_11N_PROT_AUTO = 0, /* Auto */ + WILC_FW_11N_NO_PROT, /* Do not use any protection */ + WILC_FW_11N_PROT_ERP, /* Protect all ERP frame exchanges */ + WILC_FW_11N_PROT_HT, /* Protect all HT frame exchanges */ + WILC_FW_11N_PROT_GF /* Protect all GF frame exchanges */ +}; + +enum { + WILC_FW_ERP_PROT_SELF_CTS, + WILC_FW_ERP_PROT_RTS_CTS, +}; + +enum { + WILC_FW_11N_OP_MODE_HT_MIXED = 1, + WILC_FW_11N_OP_MODE_HT_ONLY_20MHZ, + WILC_FW_11N_OP_MODE_HT_ONLY_20_40MHZ, +}; + +enum { + WILC_FW_OBBS_NONHT_NO_DETECT = 0, + WILC_FW_OBBS_NONHT_DETECT_ONLY = 1, + WILC_FW_OBBS_NONHT_DETECT_PROTECT = 2, + WILC_FW_OBBS_NONHT_DETECT_PROTECT_REPORT = 3, +}; + +enum { + WILC_FW_HT_PROT_RTS_CTS_NONHT = 0, /* RTS-CTS at non-HT rate */ + WILC_FW_HT_PROT_FIRST_FRAME_NONHT, /* First frame at non-HT rate */ + WILC_FW_HT_PROT_LSIG_TXOP, /* LSIG TXOP Protection */ + WILC_FW_HT_PROT_FIRST_FRAME_MIXED, /* First frame at Mixed format */ +}; + +enum { + WILC_FW_SMPS_MODE_STATIC = 1, + WILC_FW_SMPS_MODE_DYNAMIC = 2, + WILC_FW_SMPS_MODE_MIMO = 3, /* power save disable */ +}; + +enum { + WILC_FW_TX_RATE_AUTO = 0, + WILC_FW_TX_RATE_MBPS_1 = 1, + WILC_FW_TX_RATE_MBPS_2 = 2, + WILC_FW_TX_RATE_MBPS_5_5 = 5, + WILC_FW_TX_RATE_MBPS_11 = 11, + WILC_FW_TX_RATE_MBPS_6 = 6, + WILC_FW_TX_RATE_MBPS_9 = 9, + WILC_FW_TX_RATE_MBPS_12 = 12, + WILC_FW_TX_RATE_MBPS_18 = 18, + WILC_FW_TX_RATE_MBPS_24 = 24, + WILC_FW_TX_RATE_MBPS_36 = 36, + WILC_FW_TX_RATE_MBPS_48 = 48, + WILC_FW_TX_RATE_MBPS_54 = 54 +}; + +enum { + WILC_FW_DEFAULT_SCAN = 0, + WILC_FW_USER_SCAN = BIT(0), + WILC_FW_OBSS_PERIODIC_SCAN = BIT(1), + WILC_FW_OBSS_ONETIME_SCAN = BIT(2) +}; + +enum { + WILC_FW_ACTION_FRM_IDX = 0, + WILC_FW_PROBE_REQ_IDX = 1, + WILC_FW_AUTH_REQ_IDX = 2 +}; + +enum wid_type { + WID_CHAR = 0, + WID_SHORT = 1, + WID_INT = 2, + WID_STR = 3, + WID_BIN_DATA = 4, + WID_BIN = 5, +}; + +struct wid { + u16 id; + enum wid_type type; + s32 size; + s8 *val; +}; + +enum { + WID_NIL = 0xffff, + + /* + * BSS Type + * ----------------------------------------------------------- + * Configuration : Infrastructure Independent Access Point + * Values to set : 0 1 2 + * ----------------------------------------------------------- + */ + WID_BSS_TYPE = 0x0000, + + /* + * Transmit Rate + * ----------------------------------------------------------- + * Configuration : 1 2 5.5 11 6 9 12 18 24 36 48 54 + * Values to set : 1 2 5 11 6 9 12 18 24 36 48 54 + * ----------------------------------------------------------- + */ + WID_CURRENT_TX_RATE = 0x0001, + + /* + * Channel + * ----------------------------------------------------------- + * Configuration(g) : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 + * Values to set : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 + * ----------------------------------------------------------- + */ + WID_CURRENT_CHANNEL = 0x0002, + + /* + * Preamble + * ----------------------------------------------------------- + * Configuration : short long Auto + * Values to set : 0 1 2 + * ----------------------------------------------------------- + */ + WID_PREAMBLE = 0x0003, + + /* + * 11g operating mode (ignored if 11g not present) + * ----------------------------------------------------------- + * Configuration : HighPerf Compat(RSet #1) Compat(RSet #2) + * Values to set : 1 2 3 + * ----------------------------------------------------------- + */ + WID_11G_OPERATING_MODE = 0x0004, + + /* + * Mac status (response only) + * ----------------------------------------------------------- + * Configuration : disconnect connect + * Values to get : 0 1 + * ----------------------------------------------------------- + */ + WID_STATUS = 0x0005, + + /* + * Scan type + * ----------------------------------------------------------- + * Configuration : Passive Scanning Active Scanning + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_SCAN_TYPE = 0x0007, + + /* + * Key Id (WEP default key Id) + * ----------------------------------------------------------- + * Configuration : Any value between 0 to 3 + * Values to set : Same value. Default is 0 + * ----------------------------------------------------------- + */ + WID_KEY_ID = 0x0009, + + /* + * QoS Enable + * ----------------------------------------------------------- + * Configuration : QoS Disable WMM Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_QOS_ENABLE = 0x000A, + + /* + * Power Management + * ----------------------------------------------------------- + * Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE + * Values to set : 0 1 2 + * ----------------------------------------------------------- + */ + WID_POWER_MANAGEMENT = 0x000B, + + /* + * WEP/802 11I Configuration + * ----------------------------------------------------------- + * Configuration:Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP + * Values (0x) : 00 03 07 29 49 31 51 + * Configuration:WPA-AES+TKIP RSN-AES+TKIP + * Values (0x) : 69 71 + * ----------------------------------------------------------- + */ + WID_11I_MODE = 0x000C, + + /* + * WEP Configuration: Used in BSS STA mode only when WEP is enabled + * ----------------------------------------------------------- + * Configuration : Open System Shared Key Any Type | 802.1x Auth + * Values (0x) : 01 02 03 | BIT2 + * ----------------------------------------------------------- + */ + WID_AUTH_TYPE = 0x000D, + + /* + * Site Survey Type + * ----------------------------------------------------------- + * Configuration : Values to set + * Survey 1 Channel : 0 + * survey all Channels : 1 + * Disable Site Survey : 2 + * ----------------------------------------------------------- + */ + WID_SITE_SURVEY = 0x000E, + + /* + * Listen Interval + * ----------------------------------------------------------- + * Configuration : Any value between 1 to 255 + * Values to set : Same value. Default is 3 + * ----------------------------------------------------------- + */ + WID_LISTEN_INTERVAL = 0x000F, + + /* + * DTIM Period + * ----------------------------------------------------------- + * Configuration : Any value between 1 to 255 + * Values to set : Same value. Default is 3 + * ----------------------------------------------------------- + */ + WID_DTIM_PERIOD = 0x0010, + + /* + * ACK Policy + * ----------------------------------------------------------- + * Configuration : Normal Ack No Ack + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_ACK_POLICY = 0x0011, + + /* + * Reset MAC (Set only) + * ----------------------------------------------------------- + * Configuration : Don't Reset Reset No Request + * Values to set : 0 1 2 + * ----------------------------------------------------------- + */ + WID_RESET = 0x0012, + + /* + * Broadcast SSID Option: Setting this will adhere to "" SSID element + * ----------------------------------------------------------- + * Configuration : Enable Disable + * Values to set : 1 0 + * ----------------------------------------------------------- + */ + WID_BCAST_SSID = 0x0015, + + /* + * Disconnect (Station) + * ----------------------------------------------------------- + * Configuration : Association ID + * Values to set : Association ID + * ----------------------------------------------------------- + */ + WID_DISCONNECT = 0x0016, + + /* + * 11a Tx Power Level + * ----------------------------------------------------------- + * Configuration : Sets TX Power (Higher the value greater the power) + * Values to set : Any value between 0 and 63 (inclusive Default 48) + * ----------------------------------------------------------- + */ + WID_TX_POWER_LEVEL_11A = 0x0018, + + /* + * Group Key Update Policy Selection + * ----------------------------------------------------------- + * Configuration : Disabled timeBased packetBased timePacketBased + * Values to set : 1 2 3 4 + * ----------------------------------------------------------- + */ + WID_REKEY_POLICY = 0x0019, + + /* + * Allow Short Slot + * ----------------------------------------------------------- + * Configuration : Disallow Short Slot Allow Short Slot + * (Enable Only Long Slot) (Enable Short Slot if applicable) + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_SHORT_SLOT_ALLOWED = 0x001A, + + WID_PHY_ACTIVE_REG = 0x001B, + + /* + * 11b Tx Power Level + * ----------------------------------------------------------- + * Configuration : Sets TX Power (Higher the value greater the power) + * Values to set : Any value between 0 and 63 (inclusive Default 48) + * ----------------------------------------------------------- + */ + WID_TX_POWER_LEVEL_11B = 0x001D, + + /* + * Scan Request + * ----------------------------------------------------------- + * Configuration : Request default scan + * Values to set : 0 + * ----------------------------------------------------------- + */ + WID_START_SCAN_REQ = 0x001E, + + /* + * Rssi (get only) + * ----------------------------------------------------------- + * Configuration : + * Values to get : Rssi value + * ----------------------------------------------------------- + */ + WID_RSSI = 0x001F, + + /* + * Join Request + * ----------------------------------------------------------- + * Configuration : Request to join + * Values to set : index of scan result + * ----------------------------------------------------------- + */ + WID_JOIN_REQ = 0x0020, + + WID_LINKSPEED = 0x0026, + + /* + * Enable User Control of TX Power + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_USER_CONTROL_ON_TX_POWER = 0x0027, + + WID_MEMORY_ACCESS_8BIT = 0x0029, + + /* + * Enable Auto RX Sensitivity feature + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_AUTO_RX_SENSITIVITY = 0x0032, + + /* + * Receive Buffer Based Ack + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_DATAFLOW_CONTROL = 0x0033, + + /* + * Scan Filter + * ----------------------------------------------------------- + * Configuration : Class No filter AP only Station Only + * Values to set : 0 1 2 + * Configuration : Priority High Rssi Low Rssi Detect + * Values to set : 0 0x4 0x0 + * Configuration : Channel filter off filter on + * Values to set : 0 0x10 + * ----------------------------------------------------------- + */ + WID_SCAN_FILTER = 0x0036, + + /* + * Link Loss Threshold (measure in the beacon period) + * ----------------------------------------------------------- + * Configuration : Any value between 10 and 254(Set to 255 disable) + * Values to set : Same value. Default is 10 + * ----------------------------------------------------------- + */ + WID_LINK_LOSS_THRESHOLD = 0x0037, + + WID_ABORT_RUNNING_SCAN = 0x003E, + + /* NMAC Character WID list */ + WID_WPS_START = 0x0043, + + /* + * Protection mode for MAC + * ----------------------------------------------------------- + * Configuration : Auto No protection ERP HT GF + * Values to set : 0 1 2 3 4 + * ----------------------------------------------------------- + */ + WID_11N_PROT_MECH = 0x0080, + + /* + * ERP Protection type for MAC + * ----------------------------------------------------------- + * Configuration : Self-CTS RTS-CTS + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_11N_ERP_PROT_TYPE = 0x0081, + + /* + * HT Option Enable + * ----------------------------------------------------------- + * Configuration : HT Enable HT Disable + * Values to set : 1 0 + * ----------------------------------------------------------- + */ + WID_11N_ENABLE = 0x0082, + + /* + * 11n Operating mode (Note that 11g operating mode will also be + * used in addition to this, if this is set to HT Mixed mode) + * ----------------------------------------------------------- + * Configuration : HT Mixed HT Only-20MHz HT Only-20/40MHz + * Values to set : 1 2 3 + * ----------------------------------------------------------- + */ + WID_11N_OPERATING_MODE = 0x0083, + + /* + * 11n OBSS non-HT STA Detection flag + * ----------------------------------------------------------- + * Configuration : Do not detect + * Values to set : 0 + * Configuration : Detect, do not protect or report + * Values to set : 1 + * Configuration : Detect, protect and do not report + * Values to set : 2 + * Configuration : Detect, protect and report to other BSS + * Values to set : 3 + * ----------------------------------------------------------- + */ + WID_11N_OBSS_NONHT_DETECTION = 0x0084, + + /* + * 11n HT Protection Type + * ----------------------------------------------------------- + * Configuration : RTS-CTS First Frame Exchange at non-HT-rate + * Values to set : 0 1 + * Configuration : LSIG TXOP First Frame Exchange in Mixed Fmt + * Values to set : 2 3 + * ----------------------------------------------------------- + */ + WID_11N_HT_PROT_TYPE = 0x0085, + + /* + * 11n RIFS Protection Enable Flag + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_11N_RIFS_PROT_ENABLE = 0x0086, + + /* + * SMPS Mode + * ----------------------------------------------------------- + * Configuration : Static Dynamic MIMO (Power Save Disabled) + * Values to set : 1 2 3 + * ----------------------------------------------------------- + */ + WID_11N_SMPS_MODE = 0x0087, + + /* + * Current transmit MCS + * ----------------------------------------------------------- + * Configuration : MCS Index for data rate + * Values to set : 0 to 7 + * ----------------------------------------------------------- + */ + WID_11N_CURRENT_TX_MCS = 0x0088, + + WID_11N_PRINT_STATS = 0x0089, + + /* + * 11n Short GI Enable Flag + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_11N_SHORT_GI_ENABLE = 0x008D, + + /* + * 11n RIFS Enable Flag + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_RIFS_MODE = 0x0094, + + /* + * TX Abort Feature + * ----------------------------------------------------------- + * Configuration : Disable Self CTS Enable Self CTS + * Values to set : 0 1 + * Configuration : Disable TX Abort Enable TX Abort + * Values to set : 2 3 + * Configuration : Enable HW TX Abort Enable SW TX Abort + * Values to set : 4 5 + * ----------------------------------------------------------- + */ + WID_TX_ABORT_CONFIG = 0x00A1, + + WID_REG_TSSI_11B_VALUE = 0x00A6, + WID_REG_TSSI_11G_VALUE = 0x00A7, + WID_REG_TSSI_11N_VALUE = 0x00A8, + WID_TX_CALIBRATION = 0x00A9, + WID_DSCR_TSSI_11B_VALUE = 0x00AA, + WID_DSCR_TSSI_11G_VALUE = 0x00AB, + WID_DSCR_TSSI_11N_VALUE = 0x00AC, + + /* + * Immediate Block-Ack Support + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_11N_IMMEDIATE_BA_ENABLED = 0x00AF, + + /* + * TXOP Disable Flag + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 1 0 + * ----------------------------------------------------------- + */ + WID_11N_TXOP_PROT_DISABLE = 0x00B0, + + WID_TX_POWER_LEVEL_11N = 0x00B1, + + /* Custom Character WID list */ + /* SCAN Complete notification WID*/ + WID_SCAN_COMPLETE = 0x00C9, + + WID_DEL_BEACON = 0x00CA, + + WID_LOG_TERMINAL_SWITCH = 0x00CD, + WID_TX_POWER = 0x00CE, + WID_WOWLAN_TRIGGER = 0X00CF, + WID_SET_MFP = 0x00D0, + + WID_DEFAULT_MGMT_KEY_ID = 0x00D2, + /* EMAC Short WID list */ + /* RTS Threshold */ + /* + * ----------------------------------------------------------- + * Configuration : Any value between 256 to 2347 + * Values to set : Same value. Default is 2347 + * ----------------------------------------------------------- + */ + WID_RTS_THRESHOLD = 0x1000, + + /* + * Fragmentation Threshold + * ----------------------------------------------------------- + * Configuration : Any value between 256 to 2346 + * Values to set : Same value. Default is 2346 + * ----------------------------------------------------------- + */ + WID_FRAG_THRESHOLD = 0x1001, + + WID_SHORT_RETRY_LIMIT = 0x1002, + WID_LONG_RETRY_LIMIT = 0x1003, + WID_BEACON_INTERVAL = 0x1006, + WID_MEMORY_ACCESS_16BIT = 0x1008, + WID_PASSIVE_SCAN_TIME = 0x100D, + WID_JOIN_START_TIMEOUT = 0x100F, + WID_ASOC_TIMEOUT = 0x1011, + WID_11I_PROTOCOL_TIMEOUT = 0x1012, + WID_EAPOL_RESPONSE_TIMEOUT = 0x1013, + + /* NMAC Short WID list */ + WID_11N_SIG_QUAL_VAL = 0x1085, + WID_CCA_THRESHOLD = 0x1087, + + /* Custom Short WID list */ + + /* EMAC Integer WID list */ + WID_FAILED_COUNT = 0x2000, + WID_RETRY_COUNT = 0x2001, + WID_MULTIPLE_RETRY_COUNT = 0x2002, + WID_FRAME_DUPLICATE_COUNT = 0x2003, + WID_ACK_FAILURE_COUNT = 0x2004, + WID_RECEIVED_FRAGMENT_COUNT = 0x2005, + WID_MCAST_RECEIVED_FRAME_COUNT = 0x2006, + WID_FCS_ERROR_COUNT = 0x2007, + WID_SUCCESS_FRAME_COUNT = 0x2008, + WID_HUT_TX_COUNT = 0x200A, + WID_TX_FRAGMENT_COUNT = 0x200B, + WID_TX_MULTICAST_FRAME_COUNT = 0x200C, + WID_RTS_SUCCESS_COUNT = 0x200D, + WID_RTS_FAILURE_COUNT = 0x200E, + WID_WEP_UNDECRYPTABLE_COUNT = 0x200F, + WID_REKEY_PERIOD = 0x2010, + WID_REKEY_PACKET_COUNT = 0x2011, + WID_1X_SERV_ADDR = 0x2012, + WID_STACK_IP_ADDR = 0x2013, + WID_STACK_NETMASK_ADDR = 0x2014, + WID_HW_RX_COUNT = 0x2015, + WID_MEMORY_ADDRESS = 0x201E, + WID_MEMORY_ACCESS_32BIT = 0x201F, + + /* NMAC Integer WID list */ + /* Custom Integer WID list */ + WID_GET_INACTIVE_TIME = 0x2084, + /* EMAC String WID list */ + WID_SSID = 0x3000, + WID_FIRMWARE_VERSION = 0x3001, + WID_OPERATIONAL_RATE_SET = 0x3002, + WID_BSSID = 0x3003, + WID_WEP_KEY_VALUE = 0x3004, + WID_11I_PSK = 0x3008, + WID_11E_P_ACTION_REQ = 0x3009, + WID_1X_KEY = 0x300A, + WID_HARDWARE_VERSION = 0x300B, + WID_MAC_ADDR = 0x300C, + WID_HUT_DEST_ADDR = 0x300D, + WID_PHY_VERSION = 0x300F, + WID_SUPP_USERNAME = 0x3010, + WID_SUPP_PASSWORD = 0x3011, + WID_SITE_SURVEY_RESULTS = 0x3012, + WID_RX_POWER_LEVEL = 0x3013, + WID_SET_STA_MAC_INACTIVE_TIME = 0x3017, + WID_ADD_WEP_KEY = 0x3019, + WID_REMOVE_WEP_KEY = 0x301A, + WID_ADD_PTK = 0x301B, + WID_ADD_RX_GTK = 0x301C, + WID_ADD_TX_GTK = 0x301D, + WID_REMOVE_KEY = 0x301E, + WID_ASSOC_REQ_INFO = 0x301F, + WID_ASSOC_RES_INFO = 0x3020, + WID_ADD_IGTK = 0x3022, + WID_MANUFACTURER = 0x3026, /* Added for CAPI tool */ + WID_MODEL_NAME = 0x3027, /* Added for CAPI tool */ + WID_MODEL_NUM = 0x3028, /* Added for CAPI tool */ + WID_DEVICE_NAME = 0x3029, /* Added for CAPI tool */ + + /* NMAC String WID list */ + WID_SET_OPERATION_MODE = 0x3079, + WID_11N_P_ACTION_REQ = 0x3080, + WID_HUT_TEST_ID = 0x3081, + WID_PMKID_INFO = 0x3082, + WID_FIRMWARE_INFO = 0x3083, + WID_REGISTER_FRAME = 0x3084, + WID_DEL_ALL_STA = 0x3085, + WID_REMAIN_ON_CHAN = 0x3996, + WID_SSID_PROBE_REQ = 0x3997, + WID_JOIN_REQ_EXTENDED = 0x3998, + + WID_IP_ADDRESS = 0x3999, + + /* Custom String WID list */ + + /* EMAC Binary WID list */ + WID_UAPSD_CONFIG = 0x4001, + WID_UAPSD_STATUS = 0x4002, + WID_WMM_AP_AC_PARAMS = 0x4003, + WID_WMM_STA_AC_PARAMS = 0x4004, + WID_NETWORK_INFO = 0x4005, + WID_STA_JOIN_INFO = 0x4006, + WID_CONNECTED_STA_LIST = 0x4007, + + /* NMAC Binary WID list */ + WID_11N_AUTORATE_TABLE = 0x4080, + + WID_SCAN_CHANNEL_LIST = 0x4084, + + WID_INFO_ELEMENT_PROBE = 0x4085, + WID_INFO_ELEMENT_ASSOCIATE = 0x4086, + WID_ADD_STA = 0X4087, + WID_REMOVE_STA = 0X4088, + WID_EDIT_STA = 0X4089, + WID_ADD_BEACON = 0x408a, + + WID_SETUP_MULTICAST_FILTER = 0x408b, + WID_EXTERNAL_AUTH_PARAM = 0x408d, + /* Miscellaneous WIDs */ + WID_ALL = 0x7FFE, + WID_MAX = 0xFFFF +}; + +#endif |