Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 402 insertions, 0 deletions

diff --git a/drivers/net/wireless/realtek/rtl818x/rtl818x.h b/drivers/net/wireless/realtek/rtl818x/rtl818x.h
new file mode 100644
index 000000000..597f41af8
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl818x.h
@@ -0,0 +1,402 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Definitions for RTL818x hardware
+ *
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
+ *
+ * Based on the r8187 driver, which is:
+ * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al.
+ */
+
+#ifndef RTL818X_H
+#define RTL818X_H
+
+struct rtl818x_csr {
+
+	u8	MAC[6];
+	u8	reserved_0[2];
+
+	union {
+		__le32	MAR[2];  /* 0x8 */
+
+		struct{ /* rtl8187se */
+			u8 rf_sw_config; /* 0x8 */
+			u8 reserved_01[3];
+			__le32 TMGDA; /* 0xc */
+		} __packed;
+	} __packed;
+
+	union { /*  0x10  */
+		struct {
+			u8	RX_FIFO_COUNT;
+			u8	reserved_1;
+			u8	TX_FIFO_COUNT;
+			u8	BQREQ;
+		} __packed;
+
+		__le32 TBKDA; /* for 8187se */
+	} __packed;
+
+	__le32 TBEDA; /* 0x14 - for rtl8187se */
+
+	__le32	TSFT[2];
+
+	union { /* 0x20 */
+		__le32	TLPDA;
+		__le32  TVIDA; /* for 8187se */
+	} __packed;
+
+	union { /* 0x24 */
+		__le32	TNPDA;
+		__le32  TVODA; /* for 8187se */
+	} __packed;
+
+	/* hi pri ring for all cards */
+	__le32	THPDA; /* 0x28 */
+
+	union { /* 0x2c */
+		struct {
+			u8 reserved_2a;
+			u8 EIFS_8187SE;
+		} __packed;
+
+		__le16	BRSR;
+	} __packed;
+
+	u8	BSSID[6]; /* 0x2e */
+
+	union { /* 0x34 */
+		struct {
+			u8 RESP_RATE;
+			u8 EIFS;
+		} __packed;
+		__le16 BRSR_8187SE;
+	} __packed;
+
+	u8	reserved_3[1]; /* 0x36 */
+	u8	CMD; /* 0x37 */
+#define RTL818X_CMD_TX_ENABLE		(1 << 2)
+#define RTL818X_CMD_RX_ENABLE		(1 << 3)
+#define RTL818X_CMD_RESET		(1 << 4)
+	u8	reserved_4[4]; /* 0x38 */
+	union {
+		struct {
+			__le16	INT_MASK;
+			__le16	INT_STATUS;
+		} __packed;
+
+		__le32	INT_STATUS_SE; /* 0x3c */
+	} __packed;
+/* status bits for rtl8187 and rtl8180/8185 */
+#define RTL818X_INT_RX_OK		(1 <<  0)
+#define RTL818X_INT_RX_ERR		(1 <<  1)
+#define RTL818X_INT_TXL_OK		(1 <<  2)
+#define RTL818X_INT_TXL_ERR		(1 <<  3)
+#define RTL818X_INT_RX_DU		(1 <<  4)
+#define RTL818X_INT_RX_FO		(1 <<  5)
+#define RTL818X_INT_TXN_OK		(1 <<  6)
+#define RTL818X_INT_TXN_ERR		(1 <<  7)
+#define RTL818X_INT_TXH_OK		(1 <<  8)
+#define RTL818X_INT_TXH_ERR		(1 <<  9)
+#define RTL818X_INT_TXB_OK		(1 << 10)
+#define RTL818X_INT_TXB_ERR		(1 << 11)
+#define RTL818X_INT_ATIM		(1 << 12)
+#define RTL818X_INT_BEACON		(1 << 13)
+#define RTL818X_INT_TIME_OUT		(1 << 14)
+#define RTL818X_INT_TX_FO		(1 << 15)
+/* status bits for rtl8187se */
+#define RTL818X_INT_SE_TIMER3		(1 <<  0)
+#define RTL818X_INT_SE_TIMER2		(1 <<  1)
+#define RTL818X_INT_SE_RQ0SOR		(1 <<  2)
+#define RTL818X_INT_SE_TXBED_OK		(1 <<  3)
+#define RTL818X_INT_SE_TXBED_ERR	(1 <<  4)
+#define RTL818X_INT_SE_TXBE_OK		(1 <<  5)
+#define RTL818X_INT_SE_TXBE_ERR		(1 <<  6)
+#define RTL818X_INT_SE_RX_OK		(1 <<  7)
+#define RTL818X_INT_SE_RX_ERR		(1 <<  8)
+#define RTL818X_INT_SE_TXL_OK		(1 <<  9)
+#define RTL818X_INT_SE_TXL_ERR		(1 << 10)
+#define RTL818X_INT_SE_RX_DU		(1 << 11)
+#define RTL818X_INT_SE_RX_FIFO		(1 << 12)
+#define RTL818X_INT_SE_TXN_OK		(1 << 13)
+#define RTL818X_INT_SE_TXN_ERR		(1 << 14)
+#define RTL818X_INT_SE_TXH_OK		(1 << 15)
+#define RTL818X_INT_SE_TXH_ERR		(1 << 16)
+#define RTL818X_INT_SE_TXB_OK		(1 << 17)
+#define RTL818X_INT_SE_TXB_ERR		(1 << 18)
+#define RTL818X_INT_SE_ATIM_TO		(1 << 19)
+#define RTL818X_INT_SE_BK_TO		(1 << 20)
+#define RTL818X_INT_SE_TIMER1		(1 << 21)
+#define RTL818X_INT_SE_TX_FIFO		(1 << 22)
+#define RTL818X_INT_SE_WAKEUP		(1 << 23)
+#define RTL818X_INT_SE_BK_DMA		(1 << 24)
+#define RTL818X_INT_SE_TMGD_OK		(1 << 30)
+	__le32	TX_CONF; /* 0x40 */
+#define RTL818X_TX_CONF_LOOPBACK_MAC	(1 << 17)
+#define RTL818X_TX_CONF_LOOPBACK_CONT	(3 << 17)
+#define RTL818X_TX_CONF_NO_ICV		(1 << 19)
+#define RTL818X_TX_CONF_DISCW		(1 << 20)
+#define RTL818X_TX_CONF_SAT_HWPLCP	(1 << 24)
+#define RTL818X_TX_CONF_R8180_ABCD	(2 << 25)
+#define RTL818X_TX_CONF_R8180_F		(3 << 25)
+#define RTL818X_TX_CONF_R8185_ABC	(4 << 25)
+#define RTL818X_TX_CONF_R8185_D		(5 << 25)
+#define RTL818X_TX_CONF_R8187vD		(5 << 25)
+#define RTL818X_TX_CONF_R8187vD_B	(6 << 25)
+#define RTL818X_TX_CONF_RTL8187SE	(6 << 25)
+#define RTL818X_TX_CONF_HWVER_MASK	(7 << 25)
+#define RTL818X_TX_CONF_DISREQQSIZE	(1 << 28)
+#define RTL818X_TX_CONF_PROBE_DTS	(1 << 29)
+#define RTL818X_TX_CONF_HW_SEQNUM	(1 << 30)
+#define RTL818X_TX_CONF_CW_MIN		(1 << 31)
+	__le32	RX_CONF;
+#define RTL818X_RX_CONF_MONITOR		(1 <<  0)
+#define RTL818X_RX_CONF_NICMAC		(1 <<  1)
+#define RTL818X_RX_CONF_MULTICAST	(1 <<  2)
+#define RTL818X_RX_CONF_BROADCAST	(1 <<  3)
+#define RTL818X_RX_CONF_FCS		(1 <<  5)
+#define RTL818X_RX_CONF_DATA		(1 << 18)
+#define RTL818X_RX_CONF_CTRL		(1 << 19)
+#define RTL818X_RX_CONF_MGMT		(1 << 20)
+#define RTL818X_RX_CONF_ADDR3		(1 << 21)
+#define RTL818X_RX_CONF_PM		(1 << 22)
+#define RTL818X_RX_CONF_BSSID		(1 << 23)
+#define RTL818X_RX_CONF_RX_AUTORESETPHY	(1 << 28)
+#define RTL818X_RX_CONF_CSDM1		(1 << 29)
+#define RTL818X_RX_CONF_CSDM2		(1 << 30)
+#define RTL818X_RX_CONF_ONLYERLPKT	(1 << 31)
+	__le32	INT_TIMEOUT;
+	__le32	TBDA;
+	u8	EEPROM_CMD;
+#define RTL818X_EEPROM_CMD_READ		(1 << 0)
+#define RTL818X_EEPROM_CMD_WRITE	(1 << 1)
+#define RTL818X_EEPROM_CMD_CK		(1 << 2)
+#define RTL818X_EEPROM_CMD_CS		(1 << 3)
+#define RTL818X_EEPROM_CMD_NORMAL	(0 << 6)
+#define RTL818X_EEPROM_CMD_LOAD		(1 << 6)
+#define RTL818X_EEPROM_CMD_PROGRAM	(2 << 6)
+#define RTL818X_EEPROM_CMD_CONFIG	(3 << 6)
+	u8	CONFIG0;
+	u8	CONFIG1;
+	u8	CONFIG2;
+#define RTL818X_CONFIG2_ANTENNA_DIV	(1 << 6)
+	__le32	ANAPARAM;
+	u8	MSR;
+#define RTL818X_MSR_NO_LINK		(0 << 2)
+#define RTL818X_MSR_ADHOC		(1 << 2)
+#define RTL818X_MSR_INFRA		(2 << 2)
+#define RTL818X_MSR_MASTER		(3 << 2)
+#define RTL818X_MSR_ENEDCA		(4 << 2)
+	u8	CONFIG3;
+#define RTL818X_CONFIG3_ANAPARAM_WRITE	(1 << 6)
+#define RTL818X_CONFIG3_GNT_SELECT	(1 << 7)
+	u8	CONFIG4;
+#define RTL818X_CONFIG4_POWEROFF	(1 << 6)
+#define RTL818X_CONFIG4_VCOOFF		(1 << 7)
+	u8	TESTR;
+	u8	reserved_9[2];
+	u8	PGSELECT;
+	u8	SECURITY;
+	__le32	ANAPARAM2;
+	u8	reserved_10[8];
+	__le32  IMR;		/* 0x6c	- Interrupt mask reg for 8187se */
+#define IMR_TMGDOK      ((1 << 30))
+#define IMR_DOT11HINT	((1 << 25))	/* 802.11h Measurement Interrupt */
+#define IMR_BCNDMAINT	((1 << 24))	/* Beacon DMA Interrupt */
+#define IMR_WAKEINT	((1 << 23))	/* Wake Up Interrupt */
+#define IMR_TXFOVW	((1 << 22))	/* Tx FIFO Overflow */
+#define IMR_TIMEOUT1	((1 << 21))	/* Time Out Interrupt 1 */
+#define IMR_BCNINT	((1 << 20))	/* Beacon Time out */
+#define IMR_ATIMINT	((1 << 19))	/* ATIM Time Out */
+#define IMR_TBDER	((1 << 18))	/* Tx Beacon Descriptor Error */
+#define IMR_TBDOK	((1 << 17))	/* Tx Beacon Descriptor OK */
+#define IMR_THPDER	((1 << 16))	/* Tx High Priority Descriptor Error */
+#define IMR_THPDOK	((1 << 15))	/* Tx High Priority Descriptor OK */
+#define IMR_TVODER	((1 << 14))	/* Tx AC_VO Descriptor Error Int */
+#define IMR_TVODOK	((1 << 13))	/* Tx AC_VO Descriptor OK Interrupt */
+#define IMR_FOVW	((1 << 12))	/* Rx FIFO Overflow Interrupt */
+#define IMR_RDU		((1 << 11))	/* Rx Descriptor Unavailable */
+#define IMR_TVIDER	((1 << 10))	/* Tx AC_VI Descriptor Error */
+#define IMR_TVIDOK	((1 << 9))	/* Tx AC_VI Descriptor OK Interrupt */
+#define IMR_RER		((1 << 8))	/* Rx Error Interrupt */
+#define IMR_ROK		((1 << 7))	/* Receive OK Interrupt */
+#define IMR_TBEDER	((1 << 6))	/* Tx AC_BE Descriptor Error */
+#define IMR_TBEDOK	((1 << 5))	/* Tx AC_BE Descriptor OK */
+#define IMR_TBKDER	((1 << 4))	/* Tx AC_BK Descriptor Error */
+#define IMR_TBKDOK	((1 << 3))	/* Tx AC_BK Descriptor OK */
+#define IMR_RQOSOK	((1 << 2))	/* Rx QoS OK Interrupt */
+#define IMR_TIMEOUT2	((1 << 1))	/* Time Out Interrupt 2 */
+#define IMR_TIMEOUT3	((1 << 0))	/* Time Out Interrupt 3 */
+	__le16	BEACON_INTERVAL; /* 0x70 */
+	__le16	ATIM_WND; /*  0x72 */
+	__le16	BEACON_INTERVAL_TIME; /*  0x74 */
+	__le16	ATIMTR_INTERVAL; /*  0x76 */
+	u8	PHY_DELAY; /*  0x78 */
+	u8	CARRIER_SENSE_COUNTER; /* 0x79 */
+	u8	reserved_11[2]; /* 0x7a */
+	u8	PHY[4]; /* 0x7c  */
+	__le16	RFPinsOutput; /* 0x80 */
+	__le16	RFPinsEnable; /* 0x82 */
+	__le16	RFPinsSelect; /* 0x84 */
+	__le16	RFPinsInput;  /* 0x86 */
+	__le32	RF_PARA; /*  0x88 */
+	__le32	RF_TIMING; /*  0x8c */
+	u8	GP_ENABLE; /*  0x90 */
+	u8	GPIO0; /*  0x91 */
+	u8	GPIO1; /*  0x92 */
+	u8	TPPOLL_STOP; /*  0x93 - rtl8187se only */
+#define RTL818x_TPPOLL_STOP_BQ			(1 << 7)
+#define RTL818x_TPPOLL_STOP_VI			(1 << 4)
+#define RTL818x_TPPOLL_STOP_VO			(1 << 5)
+#define RTL818x_TPPOLL_STOP_BE			(1 << 3)
+#define RTL818x_TPPOLL_STOP_BK			(1 << 2)
+#define RTL818x_TPPOLL_STOP_MG			(1 << 1)
+#define RTL818x_TPPOLL_STOP_HI			(1 << 6)
+
+	__le32	HSSI_PARA; /*  0x94 */
+	u8	reserved_13[4]; /* 0x98 */
+	u8	TX_AGC_CTL; /*  0x9c */
+#define RTL818X_TX_AGC_CTL_PERPACKET_GAIN	(1 << 0)
+#define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL	(1 << 1)
+#define RTL818X_TX_AGC_CTL_FEEDBACK_ANT		(1 << 2)
+	u8	TX_GAIN_CCK;
+	u8	TX_GAIN_OFDM;
+	u8	TX_ANTENNA;
+	u8	reserved_14[16];
+	u8	WPA_CONF;
+	u8	reserved_15[3];
+	u8	SIFS;
+	u8	DIFS;
+	u8	SLOT;
+	u8	reserved_16[5];
+	u8	CW_CONF;
+#define RTL818X_CW_CONF_PERPACKET_CW	(1 << 0)
+#define RTL818X_CW_CONF_PERPACKET_RETRY	(1 << 1)
+	u8	CW_VAL;
+	u8	RATE_FALLBACK;
+#define RTL818X_RATE_FALLBACK_ENABLE	(1 << 7)
+	u8	ACM_CONTROL;
+	u8	reserved_17[24];
+	u8	CONFIG5;
+	u8	TX_DMA_POLLING;
+	u8	PHY_PR;
+	u8	reserved_18;
+	__le16	CWR;
+	u8	RETRY_CTR;
+	u8	reserved_19[3];
+	__le16	INT_MIG;
+/* RTL818X_R8187B_*: magic numbers from ioregisters */
+#define RTL818X_R8187B_B	0
+#define RTL818X_R8187B_D	1
+#define RTL818X_R8187B_E	2
+	__le32	RDSAR;
+	__le16	TID_AC_MAP;
+	u8	reserved_20[4];
+	union {
+		__le16	ANAPARAM3; /* 0xee */
+		u8	ANAPARAM3A; /* for rtl8187 */
+	};
+
+#define AC_PARAM_TXOP_LIMIT_SHIFT	16
+#define AC_PARAM_ECW_MAX_SHIFT		12
+#define AC_PARAM_ECW_MIN_SHIFT		8
+#define AC_PARAM_AIFS_SHIFT		0
+
+	__le32 AC_VO_PARAM; /* 0xf0 */
+
+	union { /* 0xf4 */
+		__le32 AC_VI_PARAM;
+		__le16 FEMR;
+	} __packed;
+
+	union{ /* 0xf8 */
+		__le32  AC_BE_PARAM; /* rtl8187se */
+		struct{
+			u8      reserved_21[2];
+			__le16	TALLY_CNT; /* 0xfa */
+		} __packed;
+	} __packed;
+
+	union {
+		u8	TALLY_SEL; /* 0xfc */
+		__le32  AC_BK_PARAM;
+
+	} __packed;
+
+} __packed;
+
+/* These are addresses with NON-standard usage.
+ * They have offsets very far from this struct.
+ * I don't like to introduce a ton of "reserved"..
+ * They are for RTL8187SE
+ */
+#define REG_ADDR1(addr)	((u8 __iomem *)priv->map + (addr))
+#define REG_ADDR2(addr)	((__le16 __iomem *)priv->map + ((addr) >> 1))
+#define REG_ADDR4(addr)	((__le32 __iomem *)priv->map + ((addr) >> 2))
+
+#define FEMR_SE		REG_ADDR2(0x1D4)
+#define ARFR		REG_ADDR2(0x1E0)
+#define RFSW_CTRL	REG_ADDR2(0x272)
+#define SW_3W_DB0	REG_ADDR2(0x274)
+#define SW_3W_DB0_4	REG_ADDR4(0x274)
+#define SW_3W_DB1	REG_ADDR2(0x278)
+#define SW_3W_DB1_4	REG_ADDR4(0x278)
+#define SW_3W_CMD1	REG_ADDR1(0x27D)
+#define PI_DATA_REG	REG_ADDR2(0x360)
+#define SI_DATA_REG     REG_ADDR2(0x362)
+
+struct rtl818x_rf_ops {
+	char *name;
+	void (*init)(struct ieee80211_hw *);
+	void (*stop)(struct ieee80211_hw *);
+	void (*set_chan)(struct ieee80211_hw *, struct ieee80211_conf *);
+	u8 (*calc_rssi)(u8 agc, u8 sq);
+};
+
+/**
+ * enum rtl818x_tx_desc_flags - Tx/Rx flags are common between RTL818X chips
+ *
+ * @RTL818X_TX_DESC_FLAG_NO_ENC: Disable hardware based encryption.
+ * @RTL818X_TX_DESC_FLAG_TX_OK: TX frame was ACKed.
+ * @RTL818X_TX_DESC_FLAG_SPLCP: Use short preamble.
+ * @RTL818X_TX_DESC_FLAG_MOREFRAG: More fragments follow.
+ * @RTL818X_TX_DESC_FLAG_CTS: Use CTS-to-self protection.
+ * @RTL818X_TX_DESC_FLAG_RTS: Use RTS/CTS protection.
+ * @RTL818X_TX_DESC_FLAG_LS: Last segment of the frame.
+ * @RTL818X_TX_DESC_FLAG_FS: First segment of the frame.
+ */
+enum rtl818x_tx_desc_flags {
+	RTL818X_TX_DESC_FLAG_NO_ENC	= (1 << 15),
+	RTL818X_TX_DESC_FLAG_TX_OK	= (1 << 15),
+	RTL818X_TX_DESC_FLAG_SPLCP	= (1 << 16),
+	RTL818X_TX_DESC_FLAG_RX_UNDER	= (1 << 16),
+	RTL818X_TX_DESC_FLAG_MOREFRAG	= (1 << 17),
+	RTL818X_TX_DESC_FLAG_CTS	= (1 << 18),
+	RTL818X_TX_DESC_FLAG_RTS	= (1 << 23),
+	RTL818X_TX_DESC_FLAG_LS		= (1 << 28),
+	RTL818X_TX_DESC_FLAG_FS		= (1 << 29),
+	RTL818X_TX_DESC_FLAG_DMA	= (1 << 30),
+	RTL818X_TX_DESC_FLAG_OWN	= (1 << 31)
+};
+
+enum rtl818x_rx_desc_flags {
+	RTL818X_RX_DESC_FLAG_ICV_ERR	= (1 << 12),
+	RTL818X_RX_DESC_FLAG_CRC32_ERR	= (1 << 13),
+	RTL818X_RX_DESC_FLAG_PM		= (1 << 14),
+	RTL818X_RX_DESC_FLAG_RX_ERR	= (1 << 15),
+	RTL818X_RX_DESC_FLAG_BCAST	= (1 << 16),
+	RTL818X_RX_DESC_FLAG_PAM	= (1 << 17),
+	RTL818X_RX_DESC_FLAG_MCAST	= (1 << 18),
+	RTL818X_RX_DESC_FLAG_QOS	= (1 << 19), /* RTL8187(B) only */
+	RTL818X_RX_DESC_FLAG_TRSW	= (1 << 24), /* RTL8187(B) only */
+	RTL818X_RX_DESC_FLAG_SPLCP	= (1 << 25),
+	RTL818X_RX_DESC_FLAG_FOF	= (1 << 26),
+	RTL818X_RX_DESC_FLAG_DMA_FAIL	= (1 << 27),
+	RTL818X_RX_DESC_FLAG_LS		= (1 << 28),
+	RTL818X_RX_DESC_FLAG_FS		= (1 << 29),
+	RTL818X_RX_DESC_FLAG_EOR	= (1 << 30),
+	RTL818X_RX_DESC_FLAG_OWN	= (1 << 31)
+};
+
+#endif /* RTL818X_H */