Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 183 insertions, 0 deletions

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/def.h b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/def.h
new file mode 100644
index 000000000..edcca42c7
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/def.h
@@ -0,0 +1,183 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 2009-2013  Realtek Corporation.*/
+
+#ifndef __RTL92C_DEF_H__
+#define __RTL92C_DEF_H__
+
+#define HAL_PRIME_CHNL_OFFSET_DONT_CARE			0
+#define HAL_PRIME_CHNL_OFFSET_LOWER			1
+#define HAL_PRIME_CHNL_OFFSET_UPPER			2
+
+#define RX_MPDU_QUEUE					0
+#define RX_CMD_QUEUE					1
+
+#define	C2H_RX_CMD_HDR_LEN				8
+
+#define CHIP_BONDING_IDENTIFIER(_value)	(((_value)>>22)&0x3)
+
+/* [15:12] IC version(CUT): A-cut=0, B-cut=1, C-cut=2, D-cut=3
+ * [7] Manufacturer: TSMC=0, UMC=1
+ * [6:4] RF type: 1T1R=0, 1T2R=1, 2T2R=2
+ * [3] Chip type: TEST=0, NORMAL=1
+ * [2:0] IC type: 81xxC=0, 8723=1, 92D=2
+ */
+#define CHIP_8723			BIT(0)
+#define CHIP_92D			BIT(1)
+#define NORMAL_CHIP			BIT(3)
+#define RF_TYPE_1T1R			(~(BIT(4)|BIT(5)|BIT(6)))
+#define RF_TYPE_1T2R			BIT(4)
+#define RF_TYPE_2T2R			BIT(5)
+#define CHIP_VENDOR_UMC			BIT(7)
+#define B_CUT_VERSION			BIT(12)
+#define C_CUT_VERSION			BIT(13)
+#define D_CUT_VERSION			((BIT(12)|BIT(13)))
+#define E_CUT_VERSION			BIT(14)
+
+/* MASK */
+#define IC_TYPE_MASK			(BIT(0)|BIT(1)|BIT(2))
+#define CHIP_TYPE_MASK			BIT(3)
+#define RF_TYPE_MASK			(BIT(4)|BIT(5)|BIT(6))
+#define MANUFACTUER_MASK		BIT(7)
+#define ROM_VERSION_MASK		(BIT(11)|BIT(10)|BIT(9)|BIT(8))
+#define CUT_VERSION_MASK		(BIT(15)|BIT(14)|BIT(13)|BIT(12))
+
+/* Get element */
+#define GET_CVID_IC_TYPE(version)	((version) & IC_TYPE_MASK)
+#define GET_CVID_CHIP_TYPE(version)	((version) & CHIP_TYPE_MASK)
+#define GET_CVID_RF_TYPE(version)	((version) & RF_TYPE_MASK)
+#define GET_CVID_MANUFACTUER(version)	((version) & MANUFACTUER_MASK)
+#define GET_CVID_ROM_VERSION(version)	((version) & ROM_VERSION_MASK)
+#define GET_CVID_CUT_VERSION(version)	((version) & CUT_VERSION_MASK)
+
+#define IS_81XXC(version)						\
+	((GET_CVID_IC_TYPE(version) == 0) ? true : false)
+#define IS_8723_SERIES(version)						\
+	((GET_CVID_IC_TYPE(version) == CHIP_8723) ? true : false)
+#define IS_92D(version)							\
+	((GET_CVID_IC_TYPE(version) == CHIP_92D) ? true : false)
+
+#define IS_NORMAL_CHIP(version)						\
+	((GET_CVID_CHIP_TYPE(version)) ? true : false)
+#define IS_NORMAL_CHIP92D(version)					\
+	((GET_CVID_CHIP_TYPE(version)) ? true : false)
+
+#define IS_1T1R(version)						\
+	((GET_CVID_RF_TYPE(version)) ? false : true)
+#define IS_1T2R(version)						\
+	((GET_CVID_RF_TYPE(version) == RF_TYPE_1T2R) ? true : false)
+#define IS_2T2R(version)						\
+	((GET_CVID_RF_TYPE(version) == RF_TYPE_2T2R) ? true : false)
+#define IS_CHIP_VENDOR_UMC(version)					\
+	((GET_CVID_MANUFACTUER(version)) ? true : false)
+
+#define IS_92C_SERIAL(version)						\
+	((IS_81XXC(version) && IS_2T2R(version)) ? true : false)
+#define IS_81XXC_VENDOR_UMC_B_CUT(version)				\
+	(IS_81XXC(version) ? (IS_CHIP_VENDOR_UMC(version) ?		\
+	((GET_CVID_CUT_VERSION(version) == B_CUT_VERSION) ? true	\
+	: false) : false) : false)
+
+enum version_8188e {
+	VERSION_TEST_CHIP_88E = 0x00,
+	VERSION_NORMAL_CHIP_88E = 0x01,
+	VERSION_UNKNOWN = 0xFF,
+};
+
+enum rtl819x_loopback_e {
+	RTL819X_NO_LOOPBACK = 0,
+	RTL819X_MAC_LOOPBACK = 1,
+	RTL819X_DMA_LOOPBACK = 2,
+	RTL819X_CCK_LOOPBACK = 3,
+};
+
+enum rf_optype {
+	RF_OP_BY_SW_3WIRE = 0,
+	RF_OP_BY_FW,
+	RF_OP_MAX
+};
+
+enum rf_power_state {
+	RF_ON,
+	RF_OFF,
+	RF_SLEEP,
+	RF_SHUT_DOWN,
+};
+
+enum power_save_mode {
+	POWER_SAVE_MODE_ACTIVE,
+	POWER_SAVE_MODE_SAVE,
+};
+
+enum power_polocy_config {
+	POWERCFG_MAX_POWER_SAVINGS,
+	POWERCFG_GLOBAL_POWER_SAVINGS,
+	POWERCFG_LOCAL_POWER_SAVINGS,
+	POWERCFG_LENOVO,
+};
+
+enum interface_select_pci {
+	INTF_SEL1_MINICARD = 0,
+	INTF_SEL0_PCIE = 1,
+	INTF_SEL2_RSV = 2,
+	INTF_SEL3_RSV = 3,
+};
+
+enum rtl_desc_qsel {
+	QSLT_BK = 0x2,
+	QSLT_BE = 0x0,
+	QSLT_VI = 0x5,
+	QSLT_VO = 0x7,
+	QSLT_BEACON = 0x10,
+	QSLT_HIGH = 0x11,
+	QSLT_MGNT = 0x12,
+	QSLT_CMD = 0x13,
+};
+
+enum rtl_desc92c_rate {
+	DESC92C_RATE1M = 0x00,
+	DESC92C_RATE2M = 0x01,
+	DESC92C_RATE5_5M = 0x02,
+	DESC92C_RATE11M = 0x03,
+
+	DESC92C_RATE6M = 0x04,
+	DESC92C_RATE9M = 0x05,
+	DESC92C_RATE12M = 0x06,
+	DESC92C_RATE18M = 0x07,
+	DESC92C_RATE24M = 0x08,
+	DESC92C_RATE36M = 0x09,
+	DESC92C_RATE48M = 0x0a,
+	DESC92C_RATE54M = 0x0b,
+
+	DESC92C_RATEMCS0 = 0x0c,
+	DESC92C_RATEMCS1 = 0x0d,
+	DESC92C_RATEMCS2 = 0x0e,
+	DESC92C_RATEMCS3 = 0x0f,
+	DESC92C_RATEMCS4 = 0x10,
+	DESC92C_RATEMCS5 = 0x11,
+	DESC92C_RATEMCS6 = 0x12,
+	DESC92C_RATEMCS7 = 0x13,
+	DESC92C_RATEMCS8 = 0x14,
+	DESC92C_RATEMCS9 = 0x15,
+	DESC92C_RATEMCS10 = 0x16,
+	DESC92C_RATEMCS11 = 0x17,
+	DESC92C_RATEMCS12 = 0x18,
+	DESC92C_RATEMCS13 = 0x19,
+	DESC92C_RATEMCS14 = 0x1a,
+	DESC92C_RATEMCS15 = 0x1b,
+	DESC92C_RATEMCS15_SG = 0x1c,
+	DESC92C_RATEMCS32 = 0x20,
+};
+
+struct phy_sts_cck_8192s_t {
+	u8 adc_pwdb_X[4];
+	u8 sq_rpt;
+	u8 cck_agc_rpt;
+};
+
+struct h2c_cmd_8192c {
+	u8 element_id;
+	u32 cmd_len;
+	u8 *p_cmdbuffer;
+};
+
+#endif