diff options
| author |  Linus Torvalds <torvalds@linux-foundation.org> | 2023-02-21 18:24:12 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-02-21 18:24:12 -0800 |
| commit | 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 (patch) | |
| tree | cc5c2d0a898769fd59549594fedb3ee6f84e59a0 /drivers/net/wireless/realtek/rtlwifi/rtl8723be/pwrseq.h | |
| download | linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.tar.gz linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.zip | |
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
Diffstat (limited to 'drivers/net/wireless/realtek/rtlwifi/rtl8723be/pwrseq.h')
| -rw-r--r-- | drivers/net/wireless/realtek/rtlwifi/rtl8723be/pwrseq.h | 401 |
1 files changed, 401 insertions, 0 deletions
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/pwrseq.h b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/pwrseq.h new file mode 100644 index 000000000..57eac4864 --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/pwrseq.h @@ -0,0 +1,401 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright(c) 2009-2014 Realtek Corporation.*/ + +#ifndef __RTL8723BE_PWRSEQ_H__ +#define __RTL8723BE_PWRSEQ_H__ + +#include "../pwrseqcmd.h" +/** + * Check document WM-20130425-JackieLau-RTL8723B_Power_Architecture v05.vsd + * There are 6 HW Power States: + * 0: POFF--Power Off + * 1: PDN--Power Down + * 2: CARDEMU--Card Emulation + * 3: ACT--Active Mode + * 4: LPS--Low Power State + * 5: SUS--Suspend + * + * The transision from different states are defined below + * TRANS_CARDEMU_TO_ACT + * TRANS_ACT_TO_CARDEMU + * TRANS_CARDEMU_TO_SUS + * TRANS_SUS_TO_CARDEMU + * TRANS_CARDEMU_TO_PDN + * TRANS_ACT_TO_LPS + * TRANS_LPS_TO_ACT + * + * TRANS_END + */ +#define RTL8723B_TRANS_CARDEMU_TO_ACT_STEPS 23 +#define RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS 15 +#define RTL8723B_TRANS_CARDEMU_TO_SUS_STEPS 15 +#define RTL8723B_TRANS_SUS_TO_CARDEMU_STEPS 15 +#define RTL8723B_TRANS_CARDEMU_TO_PDN_STEPS 15 +#define RTL8723B_TRANS_PDN_TO_CARDEMU_STEPS 15 +#define RTL8723B_TRANS_ACT_TO_LPS_STEPS 15 +#define RTL8723B_TRANS_LPS_TO_ACT_STEPS 15 +#define RTL8723B_TRANS_END_STEPS 1 + +#define RTL8723B_TRANS_CARDEMU_TO_ACT \ + /* format */ \ + /* comments here */ \ + /* {offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value}, */\ + /*0x20[0] = 1b'1 enable LDOA12 MACRO block for all interface*/ \ + {0x0020, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)}, \ + /*0x67[0] = 0 to disable BT_GPS_SEL pins*/ \ + {0x0067, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \ + /*Delay 1ms*/ \ + {0x0001, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_DELAY, 1, PWRSEQ_DELAY_MS}, \ + /*0x00[5] = 1b'0 release analog Ips to digital ,1:isolation*/ \ + {0x0000, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), 0}, \ + /* disable SW LPS 0x04[10]=0 and WLSUS_EN 0x04[11]=0*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, (BIT(4)|BIT(3)|BIT(2)), 0}, \ + /* Disable USB suspend */ \ + {0x0075, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0) , BIT(0)}, \ + /* wait till 0x04[17] = 1 power ready*/ \ + {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1)}, \ + /* Enable USB suspend */ \ + {0x0075, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0) , 0}, \ + /* release WLON reset 0x04[16]=1*/ \ + {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)}, \ + /* disable HWPDN 0x04[15]=0*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0}, \ + /* disable WL suspend*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, (BIT(4)|BIT(3)), 0}, \ + /* polling until return 0*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)}, \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(0), 0}, \ + /* Enable WL control XTAL setting*/ \ + {0x0010, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6), BIT(6)}, \ + /*Enable falling edge triggering interrupt*/ \ + {0x0049, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \ + /*Enable GPIO9 interrupt mode*/ \ + {0x0063, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \ + /*Enable GPIO9 input mode*/ \ + {0x0062, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0}, \ + /*Enable HSISR GPIO[C:0] interrupt*/ \ + {0x0058, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)}, \ + /*Enable HSISR GPIO9 interrupt*/ \ + {0x005A, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \ + /*For GPIO9 internal pull high setting by test chip*/ \ + {0x0068, PWR_CUT_TESTCHIP_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3), BIT(3)}, \ + /*For GPIO9 internal pull high setting*/ \ + {0x0069, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6), BIT(6)}, + +#define RTL8723B_TRANS_ACT_TO_CARDEMU \ + /* format */ \ + /* comments here */ \ + /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\ + /*0x1F[7:0] = 0 turn off RF*/ \ + {0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, \ + /*0x4C[24] = 0x4F[0] = 0, */ \ + /*switch DPDT_SEL_P output from register 0x65[2] */ \ + {0x004F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0}, \ + /*Enable rising edge triggering interrupt*/ \ + {0x0049, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0}, \ + /*0x04[9] = 1 turn off MAC by HW state machine*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \ + /*wait till 0x04[9] = 0 polling until return 0 to disable*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0}, \ + /* Enable BT control XTAL setting*/ \ + {0x0010, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6), 0}, \ + /*0x00[5] = 1b'1 analog Ips to digital ,1:isolation*/ \ + {0x0000, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \ + PWR_CMD_WRITE, BIT(5), BIT(5)}, \ + /*0x20[0] = 1b'0 disable LDOA12 MACRO block*/ \ + {0x0020, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \ + PWR_CMD_WRITE, BIT(0), 0}, + +#define RTL8723B_TRANS_CARDEMU_TO_SUS \ + /* format */ \ + /* comments here */ \ + /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\ + /*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4) | BIT(3), (BIT(4) | BIT(3))}, \ + /*0x04[12:11] = 2b'01 enable WL suspend*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \ + PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3)}, \ + /*0x23[4] = 1b'1 12H LDO enter sleep mode*/ \ + {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \ + /*0x07[7:0] = 0x20 SDIO SOP option to disable BG/MB/ACK/SWR*/ \ + {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x20}, \ + /*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3) | BIT(4)},\ + /*Set SDIO suspend local register*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)}, \ + /*wait power state to suspend*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0}, + +#define RTL8723B_TRANS_SUS_TO_CARDEMU \ + /* format */ \ + /* comments here */ \ + /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\ + /*clear suspend enable and power down enable*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(7), 0}, \ + /*Set SDIO suspend local register*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0}, \ + /*wait power state to suspend*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)}, \ + /*0x23[4] = 1b'0 12H LDO enter normal mode*/ \ + {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \ + /*0x04[12:11] = 2b'00 disable WL suspend*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), 0}, + +#define RTL8723B_TRANS_CARDEMU_TO_CARDDIS \ + /* format */ \ + /* comments here */ \ + /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\ + /*0x07=0x20 , SOP option to disable BG/MB*/ \ + {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x20}, \ + /*0x04[12:11] = 2b'01 enable WL suspend*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)}, \ + /*0x04[10] = 1, enable SW LPS*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(2), BIT(2)}, \ + /*0x48[16] = 1 to enable GPIO9 as EXT WAKEUP*/ \ + {0x004A, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 1}, \ + /*0x23[4] = 1b'1 12H LDO enter sleep mode*/ \ + {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \ + /*Set SDIO suspend local register*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)}, \ + /*wait power state to suspend*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0}, + +#define RTL8723B_TRANS_CARDDIS_TO_CARDEMU \ + /* format */ \ + /* comments here */ \ + /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\ + /*clear suspend enable and power down enable*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(7), 0}, \ + /*Set SDIO suspend local register*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0}, \ + /*wait power state to suspend*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)}, \ + /*0x48[16] = 0 to disable GPIO9 as EXT WAKEUP*/ \ + {0x004A, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0}, \ + /*0x04[12:11] = 2b'00 disable WL suspend*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), 0}, \ + /*0x23[4] = 1b'0 12H LDO enter normal mode*/ \ + {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \ + /*PCIe DMA start*/ \ + {0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, + +#define RTL8723B_TRANS_CARDEMU_TO_PDN \ + /* format */ \ + /* comments here */ \ + /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\ + /*0x23[4] = 1b'1 12H LDO enter sleep mode*/ \ + {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \ + /*0x07[7:0] = 0x20 SOP option to disable BG/MB/ACK/SWR*/ \ + {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_SDIO_MSK | PWR_INTF_USB_MSK, PWR_BASEADDR_MAC, \ + PWR_CMD_WRITE, 0xFF, 0x20}, \ + /* 0x04[16] = 0*/ \ + {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0}, \ + /* 0x04[15] = 1*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, + +#define RTL8723B_TRANS_PDN_TO_CARDEMU \ + /* format */ \ + /* comments here */ \ + /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\ + /* 0x04[15] = 0*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0}, + +#define RTL8723B_TRANS_ACT_TO_LPS \ + /* format */ \ + /* comments here */ \ + /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\ + /*PCIe DMA stop*/ \ + {0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, \ + /*Tx Pause*/ \ + {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, \ + /*Should be zero if no packet is transmitting*/ \ + {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \ + /*Should be zero if no packet is transmitting*/ \ + {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \ + /*Should be zero if no packet is transmitting*/ \ + {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \ + /*Should be zero if no packet is transmitting*/ \ + {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \ + /*CCK and OFDM are disabled,and clock are gated*/ \ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0}, \ + /*Delay 1us*/ \ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US}, \ + /*Whole BB is reset*/ \ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0}, \ + /*Reset MAC TRX*/ \ + {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x03}, \ + /*check if removed later*/ \ + {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0}, \ + /*When driver enter Sus/ Disable, enable LOP for BT*/ \ + {0x0093, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x00}, \ + /*Respond TxOK to scheduler*/ \ + {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), BIT(5)}, + +#define RTL8723B_TRANS_LPS_TO_ACT \ + /* format */ \ + /* comments here */ \ + /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\ + /*SDIO RPWM*/ \ + {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84}, \ + /*USB RPWM*/ \ + {0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, \ + /*PCIe RPWM*/ \ + {0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, \ + /*Delay*/ \ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, \ + /*. 0x08[4] = 0 switch TSF to 40M*/ \ + {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \ + /*Polling 0x109[7]=0 TSF in 40M*/ \ + {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(7), 0}, \ + /*. 0x29[7:6] = 2b'00 enable BB clock*/ \ + {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6)|BIT(7), 0}, \ + /*. 0x101[1] = 1*/ \ + {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \ + /*. 0x100[7:0] = 0xFF enable WMAC TRX*/ \ + {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, \ + /*. 0x02[1:0] = 2b'11 enable BB macro*/ \ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1) | BIT(0), BIT(1) | BIT(0)}, \ + /*. 0x522 = 0*/ \ + {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, + +#define RTL8723B_TRANS_END \ + /* format */ \ + /* comments here */ \ + /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\ + {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, 0, \ + PWR_CMD_END, 0, 0}, + +extern struct wlan_pwr_cfg rtl8723B_power_on_flow + [RTL8723B_TRANS_CARDEMU_TO_ACT_STEPS + + RTL8723B_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723B_radio_off_flow + [RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8723B_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723B_card_disable_flow + [RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8723B_TRANS_CARDEMU_TO_PDN_STEPS + + RTL8723B_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723B_card_enable_flow + [RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8723B_TRANS_CARDEMU_TO_PDN_STEPS + + RTL8723B_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723B_suspend_flow + [RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8723B_TRANS_CARDEMU_TO_SUS_STEPS + + RTL8723B_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723B_resume_flow + [RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8723B_TRANS_CARDEMU_TO_SUS_STEPS + + RTL8723B_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723B_hwpdn_flow + [RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8723B_TRANS_CARDEMU_TO_PDN_STEPS + + RTL8723B_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723B_enter_lps_flow + [RTL8723B_TRANS_ACT_TO_LPS_STEPS + + RTL8723B_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723B_leave_lps_flow + [RTL8723B_TRANS_LPS_TO_ACT_STEPS + + RTL8723B_TRANS_END_STEPS]; + +/* RTL8723 Power Configuration CMDs for PCIe interface */ +#define RTL8723_NIC_PWR_ON_FLOW rtl8723B_power_on_flow +#define RTL8723_NIC_RF_OFF_FLOW rtl8723B_radio_off_flow +#define RTL8723_NIC_DISABLE_FLOW rtl8723B_card_disable_flow +#define RTL8723_NIC_ENABLE_FLOW rtl8723B_card_enable_flow +#define RTL8723_NIC_SUSPEND_FLOW rtl8723B_suspend_flow +#define RTL8723_NIC_RESUME_FLOW rtl8723B_resume_flow +#define RTL8723_NIC_PDN_FLOW rtl8723B_hwpdn_flow +#define RTL8723_NIC_LPS_ENTER_FLOW rtl8723B_enter_lps_flow +#define RTL8723_NIC_LPS_LEAVE_FLOW rtl8723B_leave_lps_flow + +#endif |