Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 398 insertions, 0 deletions

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c
new file mode 100644
index 000000000..d220e8955
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c
@@ -0,0 +1,398 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright(c) 2009-2014  Realtek Corporation.*/
+
+#include "../wifi.h"
+#include "../core.h"
+#include "../pci.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "../rtl8723com/phy_common.h"
+#include "dm.h"
+#include "../rtl8723com/dm_common.h"
+#include "hw.h"
+#include "fw.h"
+#include "../rtl8723com/fw_common.h"
+#include "trx.h"
+#include "led.h"
+#include "table.h"
+#include "../btcoexist/rtl_btc.h"
+
+#include <linux/vmalloc.h>
+#include <linux/module.h>
+
+static void rtl8723be_init_aspm_vars(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	/*close ASPM for AMD defaultly */
+	rtlpci->const_amdpci_aspm = 0;
+
+	/* ASPM PS mode.
+	 * 0 - Disable ASPM,
+	 * 1 - Enable ASPM without Clock Req,
+	 * 2 - Enable ASPM with Clock Req,
+	 * 3 - Alwyas Enable ASPM with Clock Req,
+	 * 4 - Always Enable ASPM without Clock Req.
+	 * set defult to RTL8192CE:3 RTL8192E:2
+	 */
+	rtlpci->const_pci_aspm = 3;
+
+	/*Setting for PCI-E device */
+	rtlpci->const_devicepci_aspm_setting = 0x03;
+
+	/*Setting for PCI-E bridge */
+	rtlpci->const_hostpci_aspm_setting = 0x02;
+
+	/* In Hw/Sw Radio Off situation.
+	 * 0 - Default,
+	 * 1 - From ASPM setting without low Mac Pwr,
+	 * 2 - From ASPM setting with low Mac Pwr,
+	 * 3 - Bus D3
+	 * set default to RTL8192CE:0 RTL8192SE:2
+	 */
+	rtlpci->const_hwsw_rfoff_d3 = 0;
+
+	/* This setting works for those device with
+	 * backdoor ASPM setting such as EPHY setting.
+	 * 0 - Not support ASPM,
+	 * 1 - Support ASPM,
+	 * 2 - According to chipset.
+	 */
+	rtlpci->const_support_pciaspm = rtlpriv->cfg->mod_params->aspm_support;
+}
+
+static int rtl8723be_init_sw_vars(struct ieee80211_hw *hw)
+{
+	int err = 0;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	char *fw_name = "rtlwifi/rtl8723befw_36.bin";
+
+	rtl8723be_bt_reg_init(hw);
+	rtlpriv->btcoexist.btc_ops = rtl_btc_get_ops_pointer();
+
+	rtlpriv->dm.dm_initialgain_enable = true;
+	rtlpriv->dm.dm_flag = 0;
+	rtlpriv->dm.disable_framebursting = false;
+	rtlpriv->dm.thermalvalue = 0;
+	rtlpci->transmit_config = CFENDFORM | BIT(15) | BIT(24) | BIT(25);
+
+	rtlpriv->phy.lck_inprogress = false;
+
+	mac->ht_enable = true;
+
+	/* compatible 5G band 88ce just 2.4G band & smsp */
+	rtlpriv->rtlhal.current_bandtype = BAND_ON_2_4G;
+	rtlpriv->rtlhal.bandset = BAND_ON_2_4G;
+	rtlpriv->rtlhal.macphymode = SINGLEMAC_SINGLEPHY;
+
+	rtlpci->receive_config = (RCR_APPFCS		|
+				  RCR_APP_MIC		|
+				  RCR_APP_ICV		|
+				  RCR_APP_PHYST_RXFF	|
+				  RCR_HTC_LOC_CTRL	|
+				  RCR_AMF		|
+				  RCR_ACF		|
+				  RCR_ADF		|
+				  RCR_AICV		|
+				  RCR_AB		|
+				  RCR_AM		|
+				  RCR_APM		|
+				  0);
+
+	rtlpci->irq_mask[0] = (u32) (IMR_PSTIMEOUT	|
+				     IMR_HSISR_IND_ON_INT	|
+				     IMR_C2HCMD		|
+				     IMR_HIGHDOK	|
+				     IMR_MGNTDOK	|
+				     IMR_BKDOK		|
+				     IMR_BEDOK		|
+				     IMR_VIDOK		|
+				     IMR_VODOK		|
+				     IMR_RDU		|
+				     IMR_ROK		|
+				     0);
+
+	rtlpci->irq_mask[1] = (u32)(IMR_RXFOVW | 0);
+
+	rtlpci->sys_irq_mask = (u32)(HSIMR_PDN_INT_EN	|
+				     HSIMR_RON_INT_EN	|
+				     0);
+
+	/* for LPS & IPS */
+	rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
+	rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
+	rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps;
+	rtlpci->msi_support = rtlpriv->cfg->mod_params->msi_support;
+	if (rtlpriv->cfg->mod_params->disable_watchdog)
+		pr_info("watchdog disabled\n");
+	rtlpriv->psc.reg_fwctrl_lps = 2;
+	rtlpriv->psc.reg_max_lps_awakeintvl = 2;
+	/* for ASPM, you can close aspm through
+	 * set const_support_pciaspm = 0
+	 */
+	rtl8723be_init_aspm_vars(hw);
+
+	if (rtlpriv->psc.reg_fwctrl_lps == 1)
+		rtlpriv->psc.fwctrl_psmode = FW_PS_MIN_MODE;
+	else if (rtlpriv->psc.reg_fwctrl_lps == 2)
+		rtlpriv->psc.fwctrl_psmode = FW_PS_MAX_MODE;
+	else if (rtlpriv->psc.reg_fwctrl_lps == 3)
+		rtlpriv->psc.fwctrl_psmode = FW_PS_DTIM_MODE;
+
+	/*low power: Disable 32k */
+	rtlpriv->psc.low_power_enable = false;
+
+	rtlpriv->rtlhal.earlymode_enable = false;
+
+	/* for firmware buf */
+	rtlpriv->rtlhal.pfirmware = vzalloc(0x8000);
+	if (!rtlpriv->rtlhal.pfirmware) {
+		pr_err("Can't alloc buffer for fw.\n");
+		return 1;
+	}
+
+	rtlpriv->max_fw_size = 0x8000;
+	pr_info("Using firmware %s\n", fw_name);
+	err = request_firmware_nowait(THIS_MODULE, 1, fw_name,
+				      rtlpriv->io.dev, GFP_KERNEL, hw,
+				      rtl_fw_cb);
+	if (err) {
+		pr_err("Failed to request firmware!\n");
+		vfree(rtlpriv->rtlhal.pfirmware);
+		rtlpriv->rtlhal.pfirmware = NULL;
+		return 1;
+	}
+	return 0;
+}
+
+static void rtl8723be_deinit_sw_vars(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	if (rtlpriv->rtlhal.pfirmware) {
+		vfree(rtlpriv->rtlhal.pfirmware);
+		rtlpriv->rtlhal.pfirmware = NULL;
+	}
+}
+
+/* get bt coexist status */
+static bool rtl8723be_get_btc_status(void)
+{
+	return true;
+}
+
+static bool is_fw_header(struct rtlwifi_firmware_header *hdr)
+{
+	return (le16_to_cpu(hdr->signature) & 0xfff0) == 0x5300;
+}
+
+static struct rtl_hal_ops rtl8723be_hal_ops = {
+	.init_sw_vars = rtl8723be_init_sw_vars,
+	.deinit_sw_vars = rtl8723be_deinit_sw_vars,
+	.read_eeprom_info = rtl8723be_read_eeprom_info,
+	.interrupt_recognized = rtl8723be_interrupt_recognized,
+	.hw_init = rtl8723be_hw_init,
+	.hw_disable = rtl8723be_card_disable,
+	.hw_suspend = rtl8723be_suspend,
+	.hw_resume = rtl8723be_resume,
+	.enable_interrupt = rtl8723be_enable_interrupt,
+	.disable_interrupt = rtl8723be_disable_interrupt,
+	.set_network_type = rtl8723be_set_network_type,
+	.set_chk_bssid = rtl8723be_set_check_bssid,
+	.set_qos = rtl8723be_set_qos,
+	.set_bcn_reg = rtl8723be_set_beacon_related_registers,
+	.set_bcn_intv = rtl8723be_set_beacon_interval,
+	.update_interrupt_mask = rtl8723be_update_interrupt_mask,
+	.get_hw_reg = rtl8723be_get_hw_reg,
+	.set_hw_reg = rtl8723be_set_hw_reg,
+	.update_rate_tbl = rtl8723be_update_hal_rate_tbl,
+	.fill_tx_desc = rtl8723be_tx_fill_desc,
+	.fill_tx_cmddesc = rtl8723be_tx_fill_cmddesc,
+	.query_rx_desc = rtl8723be_rx_query_desc,
+	.set_channel_access = rtl8723be_update_channel_access_setting,
+	.radio_onoff_checking = rtl8723be_gpio_radio_on_off_checking,
+	.set_bw_mode = rtl8723be_phy_set_bw_mode,
+	.switch_channel = rtl8723be_phy_sw_chnl,
+	.dm_watchdog = rtl8723be_dm_watchdog,
+	.scan_operation_backup = rtl8723be_phy_scan_operation_backup,
+	.set_rf_power_state = rtl8723be_phy_set_rf_power_state,
+	.led_control = rtl8723be_led_control,
+	.set_desc = rtl8723be_set_desc,
+	.get_desc = rtl8723be_get_desc,
+	.is_tx_desc_closed = rtl8723be_is_tx_desc_closed,
+	.tx_polling = rtl8723be_tx_polling,
+	.enable_hw_sec = rtl8723be_enable_hw_security_config,
+	.set_key = rtl8723be_set_key,
+	.init_sw_leds = rtl8723be_init_sw_leds,
+	.get_bbreg = rtl8723_phy_query_bb_reg,
+	.set_bbreg = rtl8723_phy_set_bb_reg,
+	.get_rfreg = rtl8723be_phy_query_rf_reg,
+	.set_rfreg = rtl8723be_phy_set_rf_reg,
+	.fill_h2c_cmd = rtl8723be_fill_h2c_cmd,
+	.get_btc_status = rtl8723be_get_btc_status,
+	.is_fw_header = is_fw_header,
+};
+
+static struct rtl_mod_params rtl8723be_mod_params = {
+	.sw_crypto = false,
+	.inactiveps = true,
+	.swctrl_lps = false,
+	.fwctrl_lps = true,
+	.msi_support = false,
+	.aspm_support = 1,
+	.disable_watchdog = false,
+	.debug_level = 0,
+	.debug_mask = 0,
+	.ant_sel = 0,
+};
+
+static const struct rtl_hal_cfg rtl8723be_hal_cfg = {
+	.bar_id = 2,
+	.write_readback = true,
+	.name = "rtl8723be_pci",
+	.alt_fw_name = "rtlwifi/rtl8723befw.bin",
+	.ops = &rtl8723be_hal_ops,
+	.mod_params = &rtl8723be_mod_params,
+	.maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL,
+	.maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN,
+	.maps[SYS_CLK] = REG_SYS_CLKR,
+	.maps[MAC_RCR_AM] = AM,
+	.maps[MAC_RCR_AB] = AB,
+	.maps[MAC_RCR_ACRC32] = ACRC32,
+	.maps[MAC_RCR_ACF] = ACF,
+	.maps[MAC_RCR_AAP] = AAP,
+	.maps[MAC_HIMR] = REG_HIMR,
+	.maps[MAC_HIMRE] = REG_HIMRE,
+	.maps[MAC_HSISR] = REG_HSISR,
+
+	.maps[EFUSE_ACCESS] = REG_EFUSE_ACCESS,
+
+	.maps[EFUSE_TEST] = REG_EFUSE_TEST,
+	.maps[EFUSE_CTRL] = REG_EFUSE_CTRL,
+	.maps[EFUSE_CLK] = 0,
+	.maps[EFUSE_CLK_CTRL] = REG_EFUSE_CTRL,
+	.maps[EFUSE_PWC_EV12V] = PWC_EV12V,
+	.maps[EFUSE_FEN_ELDR] = FEN_ELDR,
+	.maps[EFUSE_LOADER_CLK_EN] = LOADER_CLK_EN,
+	.maps[EFUSE_ANA8M] = ANA8M,
+	.maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE,
+	.maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION,
+	.maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN,
+	.maps[EFUSE_OOB_PROTECT_BYTES_LEN] = EFUSE_OOB_PROTECT_BYTES,
+
+	.maps[RWCAM] = REG_CAMCMD,
+	.maps[WCAMI] = REG_CAMWRITE,
+	.maps[RCAMO] = REG_CAMREAD,
+	.maps[CAMDBG] = REG_CAMDBG,
+	.maps[SECR] = REG_SECCFG,
+	.maps[SEC_CAM_NONE] = CAM_NONE,
+	.maps[SEC_CAM_WEP40] = CAM_WEP40,
+	.maps[SEC_CAM_TKIP] = CAM_TKIP,
+	.maps[SEC_CAM_AES] = CAM_AES,
+	.maps[SEC_CAM_WEP104] = CAM_WEP104,
+
+	.maps[RTL_IMR_BCNDMAINT6] = IMR_BCNDMAINT6,
+	.maps[RTL_IMR_BCNDMAINT5] = IMR_BCNDMAINT5,
+	.maps[RTL_IMR_BCNDMAINT4] = IMR_BCNDMAINT4,
+	.maps[RTL_IMR_BCNDMAINT3] = IMR_BCNDMAINT3,
+	.maps[RTL_IMR_BCNDMAINT2] = IMR_BCNDMAINT2,
+	.maps[RTL_IMR_BCNDMAINT1] = IMR_BCNDMAINT1,
+/*	.maps[RTL_IMR_BCNDOK8] = IMR_BCNDOK8,     */   /*need check*/
+	.maps[RTL_IMR_BCNDOK7] = IMR_BCNDOK7,
+	.maps[RTL_IMR_BCNDOK6] = IMR_BCNDOK6,
+	.maps[RTL_IMR_BCNDOK5] = IMR_BCNDOK5,
+	.maps[RTL_IMR_BCNDOK4] = IMR_BCNDOK4,
+	.maps[RTL_IMR_BCNDOK3] = IMR_BCNDOK3,
+	.maps[RTL_IMR_BCNDOK2] = IMR_BCNDOK2,
+	.maps[RTL_IMR_BCNDOK1] = IMR_BCNDOK1,
+/*	.maps[RTL_IMR_TIMEOUT2] = IMR_TIMEOUT2,*/
+/*	.maps[RTL_IMR_TIMEOUT1] = IMR_TIMEOUT1,*/
+
+	.maps[RTL_IMR_TXFOVW] = IMR_TXFOVW,
+	.maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT,
+	.maps[RTL_IMR_BCNINT] = IMR_BCNDMAINT0,
+	.maps[RTL_IMR_RXFOVW] = IMR_RXFOVW,
+	.maps[RTL_IMR_RDU] = IMR_RDU,
+	.maps[RTL_IMR_ATIMEND] = IMR_ATIMEND,
+	.maps[RTL_IMR_BDOK] = IMR_BCNDOK0,
+	.maps[RTL_IMR_MGNTDOK] = IMR_MGNTDOK,
+	.maps[RTL_IMR_TBDER] = IMR_TBDER,
+	.maps[RTL_IMR_HIGHDOK] = IMR_HIGHDOK,
+	.maps[RTL_IMR_TBDOK] = IMR_TBDOK,
+	.maps[RTL_IMR_BKDOK] = IMR_BKDOK,
+	.maps[RTL_IMR_BEDOK] = IMR_BEDOK,
+	.maps[RTL_IMR_VIDOK] = IMR_VIDOK,
+	.maps[RTL_IMR_VODOK] = IMR_VODOK,
+	.maps[RTL_IMR_ROK] = IMR_ROK,
+	.maps[RTL_IMR_HSISR_IND] = IMR_HSISR_IND_ON_INT,
+	.maps[RTL_IBSS_INT_MASKS] = (IMR_BCNDMAINT0 | IMR_TBDOK | IMR_TBDER),
+
+	.maps[RTL_RC_CCK_RATE1M] = DESC92C_RATE1M,
+	.maps[RTL_RC_CCK_RATE2M] = DESC92C_RATE2M,
+	.maps[RTL_RC_CCK_RATE5_5M] = DESC92C_RATE5_5M,
+	.maps[RTL_RC_CCK_RATE11M] = DESC92C_RATE11M,
+	.maps[RTL_RC_OFDM_RATE6M] = DESC92C_RATE6M,
+	.maps[RTL_RC_OFDM_RATE9M] = DESC92C_RATE9M,
+	.maps[RTL_RC_OFDM_RATE12M] = DESC92C_RATE12M,
+	.maps[RTL_RC_OFDM_RATE18M] = DESC92C_RATE18M,
+	.maps[RTL_RC_OFDM_RATE24M] = DESC92C_RATE24M,
+	.maps[RTL_RC_OFDM_RATE36M] = DESC92C_RATE36M,
+	.maps[RTL_RC_OFDM_RATE48M] = DESC92C_RATE48M,
+	.maps[RTL_RC_OFDM_RATE54M] = DESC92C_RATE54M,
+
+	.maps[RTL_RC_HT_RATEMCS7] = DESC92C_RATEMCS7,
+	.maps[RTL_RC_HT_RATEMCS15] = DESC92C_RATEMCS15,
+};
+
+static const struct pci_device_id rtl8723be_pci_ids[] = {
+	{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0xB723, rtl8723be_hal_cfg)},
+	{},
+};
+
+MODULE_DEVICE_TABLE(pci, rtl8723be_pci_ids);
+
+MODULE_AUTHOR("PageHe	<page_he@realsil.com.cn>");
+MODULE_AUTHOR("Realtek WlanFAE	<wlanfae@realtek.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Realtek 8723BE 802.11n PCI wireless");
+MODULE_FIRMWARE("rtlwifi/rtl8723befw.bin");
+MODULE_FIRMWARE("rtlwifi/rtl8723befw_36.bin");
+
+module_param_named(swenc, rtl8723be_mod_params.sw_crypto, bool, 0444);
+module_param_named(debug_level, rtl8723be_mod_params.debug_level, int, 0644);
+module_param_named(debug_mask, rtl8723be_mod_params.debug_mask, ullong, 0644);
+module_param_named(ips, rtl8723be_mod_params.inactiveps, bool, 0444);
+module_param_named(swlps, rtl8723be_mod_params.swctrl_lps, bool, 0444);
+module_param_named(fwlps, rtl8723be_mod_params.fwctrl_lps, bool, 0444);
+module_param_named(msi, rtl8723be_mod_params.msi_support, bool, 0444);
+module_param_named(aspm, rtl8723be_mod_params.aspm_support, int, 0444);
+module_param_named(disable_watchdog, rtl8723be_mod_params.disable_watchdog,
+		   bool, 0444);
+module_param_named(ant_sel, rtl8723be_mod_params.ant_sel, int, 0444);
+MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
+MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
+MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
+MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
+MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 0)\n");
+MODULE_PARM_DESC(aspm, "Set to 1 to enable ASPM (default 1)\n");
+MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)");
+MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)");
+MODULE_PARM_DESC(disable_watchdog,
+		 "Set to 1 to disable the watchdog (default 0)\n");
+MODULE_PARM_DESC(ant_sel, "Set to 1 or 2 to force antenna number (default 0)\n");
+
+static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
+
+static struct pci_driver rtl8723be_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = rtl8723be_pci_ids,
+	.probe = rtl_pci_probe,
+	.remove = rtl_pci_disconnect,
+	.driver.pm = &rtlwifi_pm_ops,
+};
+
+module_pci_driver(rtl8723be_driver);