Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 603 insertions, 0 deletions

diff --git a/drivers/net/wwan/iosm/iosm_ipc_imem.h b/drivers/net/wwan/iosm/iosm_ipc_imem.h
new file mode 100644
index 000000000..e700dc8bf
--- /dev/null
+++ b/drivers/net/wwan/iosm/iosm_ipc_imem.h
@@ -0,0 +1,603 @@
+/* SPDX-License-Identifier: GPL-2.0-only
+ *
+ * Copyright (C) 2020-21 Intel Corporation.
+ */
+
+#ifndef IOSM_IPC_IMEM_H
+#define IOSM_IPC_IMEM_H
+
+#include <linux/skbuff.h>
+
+#include "iosm_ipc_mmio.h"
+#include "iosm_ipc_pcie.h"
+#include "iosm_ipc_uevent.h"
+#include "iosm_ipc_wwan.h"
+#include "iosm_ipc_task_queue.h"
+
+struct ipc_chnl_cfg;
+
+/* IRQ moderation in usec */
+#define IRQ_MOD_OFF 0
+#define IRQ_MOD_NET 1000
+#define IRQ_MOD_TRC 4000
+
+/* Either the PSI image is accepted by CP or the suspended flash tool is waken,
+ * informed that the CP ROM driver is not ready to process the PSI image.
+ * unit : milliseconds
+ */
+#define IPC_PSI_TRANSFER_TIMEOUT 3000
+
+/* Timeout in 20 msec to wait for the modem to boot up to
+ * IPC_MEM_DEVICE_IPC_INIT state.
+ * unit : milliseconds (500 * ipc_util_msleep(20))
+ */
+#define IPC_MODEM_BOOT_TIMEOUT 500
+
+/* Wait timeout for ipc status reflects IPC_MEM_DEVICE_IPC_UNINIT
+ * unit : milliseconds
+ */
+#define IPC_MODEM_UNINIT_TIMEOUT_MS 30
+
+/* Pending time for processing data.
+ * unit : milliseconds
+ */
+#define IPC_PEND_DATA_TIMEOUT 500
+
+/* The timeout in milliseconds for application to wait for remote time. */
+#define IPC_REMOTE_TS_TIMEOUT_MS 10
+
+/* Timeout for TD allocation retry.
+ * unit : milliseconds
+ */
+#define IPC_TD_ALLOC_TIMER_PERIOD_MS 100
+
+/* Host sleep target is host */
+#define IPC_HOST_SLEEP_HOST 0
+
+/* Host sleep target is device */
+#define IPC_HOST_SLEEP_DEVICE 1
+
+/* Sleep message, target host: AP enters sleep / target device: CP is
+ * allowed to enter sleep and shall use the host sleep protocol
+ */
+#define IPC_HOST_SLEEP_ENTER_SLEEP 0
+
+/* Sleep_message, target host: AP exits  sleep / target device: CP is
+ * NOT allowed to enter sleep
+ */
+#define IPC_HOST_SLEEP_EXIT_SLEEP 1
+
+#define IMEM_IRQ_DONT_CARE (-1)
+
+#define IPC_MEM_MAX_CHANNELS 8
+
+#define IPC_MEM_MUX_IP_SESSION_ENTRIES 8
+
+#define IPC_MEM_MUX_IP_CH_IF_ID 0
+
+#define TD_UPDATE_DEFAULT_TIMEOUT_USEC 1900
+
+#define FORCE_UPDATE_DEFAULT_TIMEOUT_USEC 500
+
+/* Sleep_message, target host: not applicable  / target device: CP is
+ * allowed to enter sleep and shall NOT use the device sleep protocol
+ */
+#define IPC_HOST_SLEEP_ENTER_SLEEP_NO_PROTOCOL 2
+
+/* in_band_crash_signal IPC_MEM_INBAND_CRASH_SIG
+ * Modem crash notification configuration. If this value is non-zero then
+ * FEATURE_SET message will be sent to the Modem as a result the Modem will
+ * signal Crash via Execution Stage register. If this value is zero then Modem
+ * will use out-of-band method to notify about it's Crash.
+ */
+#define IPC_MEM_INBAND_CRASH_SIG 1
+
+/* Extra headroom to be allocated for DL SKBs to allow addition of Ethernet
+ * header
+ */
+#define IPC_MEM_DL_ETH_OFFSET 16
+
+#define IPC_CB(skb) ((struct ipc_skb_cb *)((skb)->cb))
+#define IOSM_CHIP_INFO_SIZE_MAX 100
+
+#define FULLY_FUNCTIONAL 0
+#define IOSM_DEVLINK_INIT 1
+
+/* List of the supported UL/DL pipes. */
+enum ipc_mem_pipes {
+	IPC_MEM_PIPE_0 = 0,
+	IPC_MEM_PIPE_1,
+	IPC_MEM_PIPE_2,
+	IPC_MEM_PIPE_3,
+	IPC_MEM_PIPE_4,
+	IPC_MEM_PIPE_5,
+	IPC_MEM_PIPE_6,
+	IPC_MEM_PIPE_7,
+	IPC_MEM_PIPE_8,
+	IPC_MEM_PIPE_9,
+	IPC_MEM_PIPE_10,
+	IPC_MEM_PIPE_11,
+	IPC_MEM_PIPE_12,
+	IPC_MEM_PIPE_13,
+	IPC_MEM_PIPE_14,
+	IPC_MEM_PIPE_15,
+	IPC_MEM_PIPE_16,
+	IPC_MEM_PIPE_17,
+	IPC_MEM_PIPE_18,
+	IPC_MEM_PIPE_19,
+	IPC_MEM_PIPE_20,
+	IPC_MEM_PIPE_21,
+	IPC_MEM_PIPE_22,
+	IPC_MEM_PIPE_23,
+	IPC_MEM_MAX_PIPES
+};
+
+/* Enum defining channel states. */
+enum ipc_channel_state {
+	IMEM_CHANNEL_FREE,
+	IMEM_CHANNEL_RESERVED,
+	IMEM_CHANNEL_ACTIVE,
+	IMEM_CHANNEL_CLOSING,
+};
+
+/* Time Unit */
+enum ipc_time_unit {
+	IPC_SEC = 0,
+	IPC_MILLI_SEC = 1,
+	IPC_MICRO_SEC = 2,
+	IPC_NANO_SEC = 3,
+	IPC_PICO_SEC = 4,
+	IPC_FEMTO_SEC = 5,
+	IPC_ATTO_SEC = 6,
+};
+
+/**
+ * enum ipc_ctype - Enum defining supported channel type needed for control
+ *		    /IP traffic.
+ * @IPC_CTYPE_WWAN:		Used for IP traffic
+ * @IPC_CTYPE_CTRL:		Used for Control Communication
+ */
+enum ipc_ctype {
+	IPC_CTYPE_WWAN,
+	IPC_CTYPE_CTRL,
+};
+
+/* Pipe direction. */
+enum ipc_mem_pipe_dir {
+	IPC_MEM_DIR_UL,
+	IPC_MEM_DIR_DL,
+};
+
+/* HP update identifier. To be used as data for ipc_cp_irq_hpda_update() */
+enum ipc_hp_identifier {
+	IPC_HP_MR = 0,
+	IPC_HP_PM_TRIGGER,
+	IPC_HP_WAKEUP_SPEC_TMR,
+	IPC_HP_TD_UPD_TMR_START,
+	IPC_HP_TD_UPD_TMR,
+	IPC_HP_FAST_TD_UPD_TMR,
+	IPC_HP_UL_WRITE_TD,
+	IPC_HP_DL_PROCESS,
+	IPC_HP_NET_CHANNEL_INIT,
+	IPC_HP_CDEV_OPEN,
+};
+
+/**
+ * struct ipc_pipe - Structure for Pipe.
+ * @tdr_start:			Ipc private protocol Transfer Descriptor Ring
+ * @channel:			Id of the sio device, set by imem_sio_open,
+ *				needed to pass DL char to the user terminal
+ * @skbr_start:			Circular buffer for skbuf and the buffer
+ *				reference in a tdr_start entry.
+ * @phy_tdr_start:		Transfer descriptor start address
+ * @old_head:			last head pointer reported to CP.
+ * @old_tail:			AP read position before CP moves the read
+ *				position to write/head. If CP has consumed the
+ *				buffers, AP has to freed the skbuf starting at
+ *				tdr_start[old_tail].
+ * @nr_of_entries:		Number of elements of skb_start and tdr_start.
+ * @max_nr_of_queued_entries:	Maximum number of queued entries in TDR
+ * @accumulation_backoff:	Accumulation in usec for accumulation
+ *				backoff (0 = no acc backoff)
+ * @irq_moderation:		timer in usec for irq_moderation
+ *				(0=no irq moderation)
+ * @pipe_nr:			Pipe identification number
+ * @irq:			Interrupt vector
+ * @dir:			Direction of data stream in pipe
+ * @td_tag:			Unique tag of the buffer queued
+ * @buf_size:			Buffer size (in bytes) for preallocated
+ *				buffers (for DL pipes)
+ * @nr_of_queued_entries:	Aueued number of entries
+ * @is_open:			Check for open pipe status
+ */
+struct ipc_pipe {
+	struct ipc_protocol_td *tdr_start;
+	struct ipc_mem_channel *channel;
+	struct sk_buff **skbr_start;
+	dma_addr_t phy_tdr_start;
+	u32 old_head;
+	u32 old_tail;
+	u32 nr_of_entries;
+	u32 max_nr_of_queued_entries;
+	u32 accumulation_backoff;
+	u32 irq_moderation;
+	u32 pipe_nr;
+	u32 irq;
+	enum ipc_mem_pipe_dir dir;
+	u32 td_tag;
+	u32 buf_size;
+	u16 nr_of_queued_entries;
+	u8 is_open:1;
+};
+
+/**
+ * struct ipc_mem_channel - Structure for Channel.
+ * @channel_id:		Instance of the channel list and is return to the user
+ *			at the end of the open operation.
+ * @ctype:		Control or netif channel.
+ * @index:		unique index per ctype
+ * @ul_pipe:		pipe objects
+ * @dl_pipe:		pipe objects
+ * @if_id:		Interface ID
+ * @net_err_count:	Number of downlink errors returned by ipc_wwan_receive
+ *			interface at the entry point of the IP stack.
+ * @state:		Free, reserved or busy (in use).
+ * @ul_sem:		Needed for the blocking write or uplink transfer.
+ * @ul_list:		Uplink accumulator which is filled by the uplink
+ *			char app or IP stack. The socket buffer pointer are
+ *			added to the descriptor list in the kthread context.
+ */
+struct ipc_mem_channel {
+	int channel_id;
+	enum ipc_ctype ctype;
+	int index;
+	struct ipc_pipe ul_pipe;
+	struct ipc_pipe dl_pipe;
+	int if_id;
+	u32 net_err_count;
+	enum ipc_channel_state state;
+	struct completion ul_sem;
+	struct sk_buff_head ul_list;
+};
+
+/**
+ * enum ipc_phase - Different AP and CP phases.
+ *		    The enums defined after "IPC_P_ROM" and before
+ *		    "IPC_P_RUN" indicates the operating state where CP can
+ *		    respond to any requests. So while introducing new phase
+ *		    this shall be taken into consideration.
+ * @IPC_P_OFF:		On host PC, the PCIe device link settings are known
+ *			about the combined power on. PC is running, the driver
+ *			is loaded and CP is in power off mode. The PCIe bus
+ *			driver call the device power mode D3hot. In this phase
+ *			the driver the polls the device, until the device is in
+ *			the power on state and signals the power mode D0.
+ * @IPC_P_OFF_REQ:	The intermediate phase between cleanup activity starts
+ *			and ends.
+ * @IPC_P_CRASH:	The phase indicating CP crash
+ * @IPC_P_CD_READY:	The phase indicating CP core dump is ready
+ * @IPC_P_ROM:		After power on, CP starts in ROM mode and the IPC ROM
+ *			driver is waiting 150 ms for the AP active notification
+ *			saved in the PCI link status register.
+ * @IPC_P_PSI:		Primary signed image download phase
+ * @IPC_P_EBL:		Extended bootloader pahse
+ * @IPC_P_RUN:		The phase after flashing to RAM is the RUNTIME phase.
+ */
+enum ipc_phase {
+	IPC_P_OFF,
+	IPC_P_OFF_REQ,
+	IPC_P_CRASH,
+	IPC_P_CD_READY,
+	IPC_P_ROM,
+	IPC_P_PSI,
+	IPC_P_EBL,
+	IPC_P_RUN,
+};
+
+/**
+ * struct iosm_imem - Current state of the IPC shared memory.
+ * @mmio:			mmio instance to access CP MMIO area /
+ *				doorbell scratchpad.
+ * @ipc_protocol:		IPC Protocol instance
+ * @ipc_task:			Task for entry into ipc task queue
+ * @wwan:			WWAN device pointer
+ * @mux:			IP Data multiplexing state.
+ * @sio:			IPC SIO data structure pointer
+ * @ipc_port:			IPC PORT data structure pointer
+ * @pcie:			IPC PCIe
+ * @trace:			IPC trace data structure pointer
+ * @dev:			Pointer to device structure
+ * @ipc_requested_state:	Expected IPC state on CP.
+ * @channels:			Channel list with UL/DL pipe pairs.
+ * @ipc_devlink:		IPC Devlink data structure pointer
+ * @ipc_status:			local ipc_status
+ * @nr_of_channels:		number of configured channels
+ * @startup_timer:		startup timer for NAND support.
+ * @hrtimer_period:		Hr timer period
+ * @tdupdate_timer:		Delay the TD update doorbell.
+ * @fast_update_timer:		forced head pointer update delay timer.
+ * @td_alloc_timer:		Timer for DL pipe TD allocation retry
+ * @adb_timer:			Timer for finishing the ADB.
+ * @rom_exit_code:		Mapped boot rom exit code.
+ * @enter_runtime:		1 means the transition to runtime phase was
+ *				executed.
+ * @ul_pend_sem:		Semaphore to wait/complete of UL TDs
+ *				before closing pipe.
+ * @app_notify_ul_pend:		Signal app if UL TD is pending
+ * @dl_pend_sem:		Semaphore to wait/complete of DL TDs
+ *				before closing pipe.
+ * @app_notify_dl_pend:		Signal app if DL TD is pending
+ * @phase:			Operating phase like runtime.
+ * @pci_device_id:		Device ID
+ * @cp_version:			CP version
+ * @device_sleep:		Device sleep state
+ * @run_state_worker:		Pointer to worker component for device
+ *				setup operations to be called when modem
+ *				reaches RUN state
+ * @ev_irq_pending:		0 means inform the IPC tasklet to
+ *				process the irq actions.
+ * @flag:			Flag to monitor the state of driver
+ * @td_update_timer_suspended:	if true then td update timer suspend
+ * @ev_mux_net_transmit_pending:0 means inform the IPC tasklet to pass
+ * @reset_det_n:		Reset detect flag
+ * @pcie_wake_n:		Pcie wake flag
+ * @debugfs_wwan_dir:		WWAN Debug FS directory entry
+ * @debugfs_dir:		Debug FS directory for driver-specific entries
+ */
+struct iosm_imem {
+	struct iosm_mmio *mmio;
+	struct iosm_protocol *ipc_protocol;
+	struct ipc_task *ipc_task;
+	struct iosm_wwan *wwan;
+	struct iosm_mux *mux;
+	struct iosm_cdev *ipc_port[IPC_MEM_MAX_CHANNELS];
+	struct iosm_pcie *pcie;
+#ifdef CONFIG_WWAN_DEBUGFS
+	struct iosm_trace *trace;
+#endif
+	struct device *dev;
+	enum ipc_mem_device_ipc_state ipc_requested_state;
+	struct ipc_mem_channel channels[IPC_MEM_MAX_CHANNELS];
+	struct iosm_devlink *ipc_devlink;
+	u32 ipc_status;
+	u32 nr_of_channels;
+	struct hrtimer startup_timer;
+	ktime_t hrtimer_period;
+	struct hrtimer tdupdate_timer;
+	struct hrtimer fast_update_timer;
+	struct hrtimer td_alloc_timer;
+	struct hrtimer adb_timer;
+	enum rom_exit_code rom_exit_code;
+	u32 enter_runtime;
+	struct completion ul_pend_sem;
+	u32 app_notify_ul_pend;
+	struct completion dl_pend_sem;
+	u32 app_notify_dl_pend;
+	enum ipc_phase phase;
+	u16 pci_device_id;
+	int cp_version;
+	int device_sleep;
+	struct work_struct run_state_worker;
+	u8 ev_irq_pending[IPC_IRQ_VECTORS];
+	unsigned long flag;
+	u8 td_update_timer_suspended:1,
+	   ev_mux_net_transmit_pending:1,
+	   reset_det_n:1,
+	   pcie_wake_n:1;
+#ifdef CONFIG_WWAN_DEBUGFS
+	struct dentry *debugfs_wwan_dir;
+	struct dentry *debugfs_dir;
+#endif
+};
+
+/**
+ * ipc_imem_init - Initialize the shared memory region
+ * @pcie:	Pointer to core driver data-struct
+ * @device_id:	PCI device ID
+ * @mmio:	Pointer to the mmio area
+ * @dev:	Pointer to device structure
+ *
+ * Returns:  Initialized imem pointer on success else NULL
+ */
+struct iosm_imem *ipc_imem_init(struct iosm_pcie *pcie, unsigned int device_id,
+				void __iomem *mmio, struct device *dev);
+
+/**
+ * ipc_imem_pm_s2idle_sleep - Set PM variables to sleep/active for
+ *			      s2idle sleep/active
+ * @ipc_imem:	Pointer to imem data-struct
+ * @sleep:	Set PM Variable to sleep/active
+ */
+void ipc_imem_pm_s2idle_sleep(struct iosm_imem *ipc_imem, bool sleep);
+
+/**
+ * ipc_imem_pm_suspend - The HAL shall ask the shared memory layer
+ *			 whether D3 is allowed.
+ * @ipc_imem:	Pointer to imem data-struct
+ */
+void ipc_imem_pm_suspend(struct iosm_imem *ipc_imem);
+
+/**
+ * ipc_imem_pm_resume - The HAL shall inform the shared memory layer
+ *			that the device is active.
+ * @ipc_imem:	Pointer to imem data-struct
+ */
+void ipc_imem_pm_resume(struct iosm_imem *ipc_imem);
+
+/**
+ * ipc_imem_cleanup -	Inform CP and free the shared memory resources.
+ * @ipc_imem:	Pointer to imem data-struct
+ */
+void ipc_imem_cleanup(struct iosm_imem *ipc_imem);
+
+/**
+ * ipc_imem_irq_process - Shift the IRQ actions to the IPC thread.
+ * @ipc_imem:	Pointer to imem data-struct
+ * @irq:	Irq number
+ */
+void ipc_imem_irq_process(struct iosm_imem *ipc_imem, int irq);
+
+/**
+ * imem_get_device_sleep_state - Get the device sleep state value.
+ * @ipc_imem:	Pointer to imem instance
+ *
+ * Returns: device sleep state
+ */
+int imem_get_device_sleep_state(struct iosm_imem *ipc_imem);
+
+/**
+ * ipc_imem_td_update_timer_suspend - Updates the TD Update Timer suspend flag.
+ * @ipc_imem:	Pointer to imem data-struct
+ * @suspend:	Flag to update. If TRUE then HP update doorbell is triggered to
+ *		device without any wait. If FALSE then HP update doorbell is
+ *		delayed until timeout.
+ */
+void ipc_imem_td_update_timer_suspend(struct iosm_imem *ipc_imem, bool suspend);
+
+/**
+ * ipc_imem_channel_close - Release the channel resources.
+ * @ipc_imem:		Pointer to imem data-struct
+ * @channel_id:		Channel ID to be cleaned up.
+ */
+void ipc_imem_channel_close(struct iosm_imem *ipc_imem, int channel_id);
+
+/**
+ * ipc_imem_channel_alloc - Reserves a channel
+ * @ipc_imem:	Pointer to imem data-struct
+ * @index:	ID to lookup from the preallocated list.
+ * @ctype:	Channel type.
+ *
+ * Returns: Index on success and failure value on error
+ */
+int ipc_imem_channel_alloc(struct iosm_imem *ipc_imem, int index,
+			   enum ipc_ctype ctype);
+
+/**
+ * ipc_imem_channel_open - Establish the pipes.
+ * @ipc_imem:		Pointer to imem data-struct
+ * @channel_id:		Channel ID returned during alloc.
+ * @db_id:		Doorbell ID for trigger identifier.
+ *
+ * Returns: Pointer of ipc_mem_channel on success and NULL on failure.
+ */
+struct ipc_mem_channel *ipc_imem_channel_open(struct iosm_imem *ipc_imem,
+					      int channel_id, u32 db_id);
+
+/**
+ * ipc_imem_td_update_timer_start - Starts the TD Update Timer if not running.
+ * @ipc_imem:	Pointer to imem data-struct
+ */
+void ipc_imem_td_update_timer_start(struct iosm_imem *ipc_imem);
+
+/**
+ * ipc_imem_ul_write_td - Pass the channel UL list to protocol layer for TD
+ *		      preparation and sending them to the device.
+ * @ipc_imem:	Pointer to imem data-struct
+ *
+ * Returns: TRUE of HP Doorbell trigger is pending. FALSE otherwise.
+ */
+bool ipc_imem_ul_write_td(struct iosm_imem *ipc_imem);
+
+/**
+ * ipc_imem_ul_send - Dequeue SKB from channel list and start with
+ *		  the uplink transfer.If HP Doorbell is pending to be
+ *		  triggered then starts the TD Update Timer.
+ * @ipc_imem:	Pointer to imem data-struct
+ */
+void ipc_imem_ul_send(struct iosm_imem *ipc_imem);
+
+/**
+ * ipc_imem_channel_update - Set or modify pipe config of an existing channel
+ * @ipc_imem:		Pointer to imem data-struct
+ * @id:			Channel config index
+ * @chnl_cfg:		Channel config struct
+ * @irq_moderation:	Timer in usec for irq_moderation
+ */
+void ipc_imem_channel_update(struct iosm_imem *ipc_imem, int id,
+			     struct ipc_chnl_cfg chnl_cfg, u32 irq_moderation);
+
+/**
+ * ipc_imem_channel_free -Free an IPC channel.
+ * @channel:	Channel to be freed
+ */
+void ipc_imem_channel_free(struct ipc_mem_channel *channel);
+
+/**
+ * ipc_imem_hrtimer_stop - Stop the hrtimer
+ * @hr_timer:	Pointer to hrtimer instance
+ */
+void ipc_imem_hrtimer_stop(struct hrtimer *hr_timer);
+
+/**
+ * ipc_imem_pipe_cleanup - Reset volatile pipe content for all channels
+ * @ipc_imem:	Pointer to imem data-struct
+ * @pipe:	Pipe to cleaned up
+ */
+void ipc_imem_pipe_cleanup(struct iosm_imem *ipc_imem, struct ipc_pipe *pipe);
+
+/**
+ * ipc_imem_pipe_close - Send msg to device to close pipe
+ * @ipc_imem:	Pointer to imem data-struct
+ * @pipe:	Pipe to be closed
+ */
+void ipc_imem_pipe_close(struct iosm_imem *ipc_imem, struct ipc_pipe *pipe);
+
+/**
+ * ipc_imem_phase_update - Get the CP execution state
+ *			  and map it to the AP phase.
+ * @ipc_imem:	Pointer to imem data-struct
+ *
+ * Returns: Current ap updated phase
+ */
+enum ipc_phase ipc_imem_phase_update(struct iosm_imem *ipc_imem);
+
+/**
+ * ipc_imem_phase_get_string - Return the current operation
+ *			     phase as string.
+ * @phase:	AP phase
+ *
+ * Returns: AP phase string
+ */
+const char *ipc_imem_phase_get_string(enum ipc_phase phase);
+
+/**
+ * ipc_imem_msg_send_feature_set - Send feature set message to modem
+ * @ipc_imem:		Pointer to imem data-struct
+ * @reset_enable:	0 = out-of-band, 1 = in-band-crash notification
+ * @atomic_ctx:		if disabled call in tasklet context
+ *
+ */
+void ipc_imem_msg_send_feature_set(struct iosm_imem *ipc_imem,
+				   unsigned int reset_enable, bool atomic_ctx);
+
+/**
+ * ipc_imem_ipc_init_check - Send the init event to CP, wait a certain time and
+ *			     set CP to runtime with the context information
+ * @ipc_imem:	Pointer to imem data-struct
+ */
+void ipc_imem_ipc_init_check(struct iosm_imem *ipc_imem);
+
+/**
+ * ipc_imem_channel_init - Initialize the channel list with UL/DL pipe pairs.
+ * @ipc_imem:		Pointer to imem data-struct
+ * @ctype:		Channel type
+ * @chnl_cfg:		Channel configuration struct
+ * @irq_moderation:	Timer in usec for irq_moderation
+ */
+void ipc_imem_channel_init(struct iosm_imem *ipc_imem, enum ipc_ctype ctype,
+			   struct ipc_chnl_cfg chnl_cfg, u32 irq_moderation);
+
+/**
+ * ipc_imem_devlink_trigger_chip_info - Inform devlink that the chip
+ *					information are available if the
+ *					flashing to RAM interworking shall be
+ *					executed.
+ * @ipc_imem:	Pointer to imem structure
+ *
+ * Returns: 0 on success, -1 on failure
+ */
+int ipc_imem_devlink_trigger_chip_info(struct iosm_imem *ipc_imem);
+
+void ipc_imem_adb_timer_start(struct iosm_imem *ipc_imem);
+
+#endif