Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 756 insertions, 0 deletions

diff --git a/drivers/nfc/st-nci/se.c b/drivers/nfc/st-nci/se.c
new file mode 100644
index 000000000..ec87dd21e
--- /dev/null
+++ b/drivers/nfc/st-nci/se.c
@@ -0,0 +1,756 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Secure Element driver for STMicroelectronics NFC NCI chip
+ *
+ * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/nfc.h>
+#include <linux/delay.h>
+#include <net/nfc/nci.h>
+#include <net/nfc/nci_core.h>
+
+#include "st-nci.h"
+
+struct st_nci_pipe_info {
+	u8 pipe_state;
+	u8 src_host_id;
+	u8 src_gate_id;
+	u8 dst_host_id;
+	u8 dst_gate_id;
+} __packed;
+
+/* Hosts */
+#define ST_NCI_HOST_CONTROLLER_ID     0x00
+#define ST_NCI_TERMINAL_HOST_ID       0x01
+#define ST_NCI_UICC_HOST_ID           0x02
+#define ST_NCI_ESE_HOST_ID            0xc0
+
+/* Gates */
+#define ST_NCI_APDU_READER_GATE       0xf0
+#define ST_NCI_CONNECTIVITY_GATE      0x41
+
+/* Pipes */
+#define ST_NCI_DEVICE_MGNT_PIPE               0x02
+
+/* Connectivity pipe only */
+#define ST_NCI_SE_COUNT_PIPE_UICC             0x01
+/* Connectivity + APDU Reader pipe */
+#define ST_NCI_SE_COUNT_PIPE_EMBEDDED         0x02
+
+#define ST_NCI_SE_TO_HOT_PLUG			1000 /* msecs */
+#define ST_NCI_SE_TO_PIPES			2000
+
+#define ST_NCI_EVT_HOT_PLUG_IS_INHIBITED(x)   (x->data[0] & 0x80)
+
+#define NCI_HCI_APDU_PARAM_ATR                     0x01
+#define NCI_HCI_ADMIN_PARAM_SESSION_IDENTITY       0x01
+#define NCI_HCI_ADMIN_PARAM_WHITELIST              0x03
+#define NCI_HCI_ADMIN_PARAM_HOST_LIST              0x04
+
+#define ST_NCI_EVT_SE_HARD_RESET		0x20
+#define ST_NCI_EVT_TRANSMIT_DATA		0x10
+#define ST_NCI_EVT_WTX_REQUEST			0x11
+#define ST_NCI_EVT_SE_SOFT_RESET		0x11
+#define ST_NCI_EVT_SE_END_OF_APDU_TRANSFER	0x21
+#define ST_NCI_EVT_HOT_PLUG			0x03
+
+#define ST_NCI_SE_MODE_OFF                    0x00
+#define ST_NCI_SE_MODE_ON                     0x01
+
+#define ST_NCI_EVT_CONNECTIVITY       0x10
+#define ST_NCI_EVT_TRANSACTION        0x12
+
+#define ST_NCI_DM_GETINFO             0x13
+#define ST_NCI_DM_GETINFO_PIPE_LIST   0x02
+#define ST_NCI_DM_GETINFO_PIPE_INFO   0x01
+#define ST_NCI_DM_PIPE_CREATED        0x02
+#define ST_NCI_DM_PIPE_OPEN           0x04
+#define ST_NCI_DM_RF_ACTIVE           0x80
+#define ST_NCI_DM_DISCONNECT          0x30
+
+#define ST_NCI_DM_IS_PIPE_OPEN(p) \
+	((p & 0x0f) == (ST_NCI_DM_PIPE_CREATED | ST_NCI_DM_PIPE_OPEN))
+
+#define ST_NCI_ATR_DEFAULT_BWI        0x04
+
+/*
+ * WT = 2^BWI/10[s], convert into msecs and add a secure
+ * room by increasing by 2 this timeout
+ */
+#define ST_NCI_BWI_TO_TIMEOUT(x)      ((1 << x) * 200)
+#define ST_NCI_ATR_GET_Y_FROM_TD(x)   (x >> 4)
+
+/* If TA is present bit 0 is set */
+#define ST_NCI_ATR_TA_PRESENT(x) (x & 0x01)
+/* If TB is present bit 1 is set */
+#define ST_NCI_ATR_TB_PRESENT(x) (x & 0x02)
+
+#define ST_NCI_NUM_DEVICES           256
+
+static DECLARE_BITMAP(dev_mask, ST_NCI_NUM_DEVICES);
+
+/* Here are the mandatory pipe for st_nci */
+static struct nci_hci_gate st_nci_gates[] = {
+	{NCI_HCI_ADMIN_GATE, NCI_HCI_ADMIN_PIPE,
+					ST_NCI_HOST_CONTROLLER_ID},
+	{NCI_HCI_LINK_MGMT_GATE, NCI_HCI_LINK_MGMT_PIPE,
+					ST_NCI_HOST_CONTROLLER_ID},
+	{ST_NCI_DEVICE_MGNT_GATE, ST_NCI_DEVICE_MGNT_PIPE,
+					ST_NCI_HOST_CONTROLLER_ID},
+
+	{NCI_HCI_IDENTITY_MGMT_GATE, NCI_HCI_INVALID_PIPE,
+					ST_NCI_HOST_CONTROLLER_ID},
+
+	/* Secure element pipes are created by secure element host */
+	{ST_NCI_CONNECTIVITY_GATE, NCI_HCI_DO_NOT_OPEN_PIPE,
+					ST_NCI_HOST_CONTROLLER_ID},
+	{ST_NCI_APDU_READER_GATE, NCI_HCI_DO_NOT_OPEN_PIPE,
+					ST_NCI_HOST_CONTROLLER_ID},
+};
+
+static u8 st_nci_se_get_bwi(struct nci_dev *ndev)
+{
+	int i;
+	u8 td;
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	/* Bits 8 to 5 of the first TB for T=1 encode BWI from zero to nine */
+	for (i = 1; i < ST_NCI_ESE_MAX_LENGTH; i++) {
+		td = ST_NCI_ATR_GET_Y_FROM_TD(info->se_info.atr[i]);
+		if (ST_NCI_ATR_TA_PRESENT(td))
+			i++;
+		if (ST_NCI_ATR_TB_PRESENT(td)) {
+			i++;
+			return info->se_info.atr[i] >> 4;
+		}
+	}
+	return ST_NCI_ATR_DEFAULT_BWI;
+}
+
+static void st_nci_se_get_atr(struct nci_dev *ndev)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+	int r;
+	struct sk_buff *skb;
+
+	r = nci_hci_get_param(ndev, ST_NCI_APDU_READER_GATE,
+				NCI_HCI_APDU_PARAM_ATR, &skb);
+	if (r < 0)
+		return;
+
+	if (skb->len <= ST_NCI_ESE_MAX_LENGTH) {
+		memcpy(info->se_info.atr, skb->data, skb->len);
+
+		info->se_info.wt_timeout =
+			ST_NCI_BWI_TO_TIMEOUT(st_nci_se_get_bwi(ndev));
+	}
+	kfree_skb(skb);
+}
+
+int st_nci_hci_load_session(struct nci_dev *ndev)
+{
+	int i, j, r;
+	struct sk_buff *skb_pipe_list, *skb_pipe_info;
+	struct st_nci_pipe_info *dm_pipe_info;
+	u8 pipe_list[] = { ST_NCI_DM_GETINFO_PIPE_LIST,
+			ST_NCI_TERMINAL_HOST_ID};
+	u8 pipe_info[] = { ST_NCI_DM_GETINFO_PIPE_INFO,
+			ST_NCI_TERMINAL_HOST_ID, 0};
+
+	/* On ST_NCI device pipes number are dynamics
+	 * If pipes are already created, hci_dev_up will fail.
+	 * Doing a clear all pipe is a bad idea because:
+	 * - It does useless EEPROM cycling
+	 * - It might cause issue for secure elements support
+	 * (such as removing connectivity or APDU reader pipe)
+	 * A better approach on ST_NCI is to:
+	 * - get a pipe list for each host.
+	 * (eg: ST_NCI_HOST_CONTROLLER_ID for now).
+	 * (TODO Later on UICC HOST and eSE HOST)
+	 * - get pipe information
+	 * - match retrieved pipe list in st_nci_gates
+	 * ST_NCI_DEVICE_MGNT_GATE is a proprietary gate
+	 * with ST_NCI_DEVICE_MGNT_PIPE.
+	 * Pipe can be closed and need to be open.
+	 */
+	r = nci_hci_connect_gate(ndev, ST_NCI_HOST_CONTROLLER_ID,
+				ST_NCI_DEVICE_MGNT_GATE,
+				ST_NCI_DEVICE_MGNT_PIPE);
+	if (r < 0)
+		return r;
+
+	/* Get pipe list */
+	r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+			ST_NCI_DM_GETINFO, pipe_list, sizeof(pipe_list),
+			&skb_pipe_list);
+	if (r < 0)
+		return r;
+
+	/* Complete the existing gate_pipe table */
+	for (i = 0; i < skb_pipe_list->len; i++) {
+		pipe_info[2] = skb_pipe_list->data[i];
+		r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+					ST_NCI_DM_GETINFO, pipe_info,
+					sizeof(pipe_info), &skb_pipe_info);
+
+		if (r)
+			continue;
+
+		/*
+		 * Match pipe ID and gate ID
+		 * Output format from ST21NFC_DM_GETINFO is:
+		 * - pipe state (1byte)
+		 * - source hid (1byte)
+		 * - source gid (1byte)
+		 * - destination hid (1byte)
+		 * - destination gid (1byte)
+		 */
+		dm_pipe_info = (struct st_nci_pipe_info *)skb_pipe_info->data;
+		if (dm_pipe_info->dst_gate_id == ST_NCI_APDU_READER_GATE &&
+		    dm_pipe_info->src_host_id == ST_NCI_UICC_HOST_ID) {
+			pr_err("Unexpected apdu_reader pipe on host %x\n",
+			       dm_pipe_info->src_host_id);
+			kfree_skb(skb_pipe_info);
+			continue;
+		}
+
+		for (j = 3; (j < ARRAY_SIZE(st_nci_gates)) &&
+		     (st_nci_gates[j].gate != dm_pipe_info->dst_gate_id); j++)
+			;
+
+		if (j < ARRAY_SIZE(st_nci_gates) &&
+		    st_nci_gates[j].gate == dm_pipe_info->dst_gate_id &&
+		    ST_NCI_DM_IS_PIPE_OPEN(dm_pipe_info->pipe_state)) {
+			ndev->hci_dev->init_data.gates[j].pipe = pipe_info[2];
+
+			ndev->hci_dev->gate2pipe[st_nci_gates[j].gate] =
+						pipe_info[2];
+			ndev->hci_dev->pipes[pipe_info[2]].gate =
+						st_nci_gates[j].gate;
+			ndev->hci_dev->pipes[pipe_info[2]].host =
+						dm_pipe_info->src_host_id;
+		}
+		kfree_skb(skb_pipe_info);
+	}
+
+	/*
+	 * 3 gates have a well known pipe ID. Only NCI_HCI_LINK_MGMT_GATE
+	 * is not yet open at this stage.
+	 */
+	r = nci_hci_connect_gate(ndev, ST_NCI_HOST_CONTROLLER_ID,
+				 NCI_HCI_LINK_MGMT_GATE,
+				 NCI_HCI_LINK_MGMT_PIPE);
+
+	kfree_skb(skb_pipe_list);
+	return r;
+}
+EXPORT_SYMBOL_GPL(st_nci_hci_load_session);
+
+static void st_nci_hci_admin_event_received(struct nci_dev *ndev,
+					      u8 event, struct sk_buff *skb)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	switch (event) {
+	case ST_NCI_EVT_HOT_PLUG:
+		if (info->se_info.se_active) {
+			if (!ST_NCI_EVT_HOT_PLUG_IS_INHIBITED(skb)) {
+				del_timer_sync(&info->se_info.se_active_timer);
+				info->se_info.se_active = false;
+				complete(&info->se_info.req_completion);
+			} else {
+				mod_timer(&info->se_info.se_active_timer,
+				      jiffies +
+				      msecs_to_jiffies(ST_NCI_SE_TO_PIPES));
+			}
+		}
+	break;
+	default:
+		nfc_err(&ndev->nfc_dev->dev, "Unexpected event on admin gate\n");
+	}
+}
+
+static int st_nci_hci_apdu_reader_event_received(struct nci_dev *ndev,
+						   u8 event,
+						   struct sk_buff *skb)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	pr_debug("apdu reader gate event: %x\n", event);
+
+	switch (event) {
+	case ST_NCI_EVT_TRANSMIT_DATA:
+		del_timer_sync(&info->se_info.bwi_timer);
+		info->se_info.bwi_active = false;
+		info->se_info.cb(info->se_info.cb_context,
+				 skb->data, skb->len, 0);
+	break;
+	case ST_NCI_EVT_WTX_REQUEST:
+		mod_timer(&info->se_info.bwi_timer, jiffies +
+			  msecs_to_jiffies(info->se_info.wt_timeout));
+	break;
+	default:
+		nfc_err(&ndev->nfc_dev->dev, "Unexpected event on apdu reader gate\n");
+		return 1;
+	}
+
+	kfree_skb(skb);
+	return 0;
+}
+
+/*
+ * Returns:
+ * <= 0: driver handled the event, skb consumed
+ *    1: driver does not handle the event, please do standard processing
+ */
+static int st_nci_hci_connectivity_event_received(struct nci_dev *ndev,
+						u8 host, u8 event,
+						struct sk_buff *skb)
+{
+	int r = 0;
+	struct device *dev = &ndev->nfc_dev->dev;
+	struct nfc_evt_transaction *transaction;
+	u32 aid_len;
+	u8 params_len;
+
+	pr_debug("connectivity gate event: %x\n", event);
+
+	switch (event) {
+	case ST_NCI_EVT_CONNECTIVITY:
+		r = nfc_se_connectivity(ndev->nfc_dev, host);
+	break;
+	case ST_NCI_EVT_TRANSACTION:
+		/* According to specification etsi 102 622
+		 * 11.2.2.4 EVT_TRANSACTION Table 52
+		 * Description  Tag     Length
+		 * AID          81      5 to 16
+		 * PARAMETERS   82      0 to 255
+		 *
+		 * The key differences are aid storage length is variably sized
+		 * in the packet, but fixed in nfc_evt_transaction, and that
+		 * the aid_len is u8 in the packet, but u32 in the structure,
+		 * and the tags in the packet are not included in
+		 * nfc_evt_transaction.
+		 *
+		 * size(b):  1          1       5-16 1             1           0-255
+		 * offset:   0          1       2    aid_len + 2   aid_len + 3 aid_len + 4
+		 * mem name: aid_tag(M) aid_len aid  params_tag(M) params_len  params
+		 * example:  0x81       5-16    X    0x82          0-255       X
+		 */
+		if (skb->len < 2 || skb->data[0] != NFC_EVT_TRANSACTION_AID_TAG)
+			return -EPROTO;
+
+		aid_len = skb->data[1];
+
+		if (skb->len < aid_len + 4 ||
+		    aid_len > sizeof(transaction->aid))
+			return -EPROTO;
+
+		params_len = skb->data[aid_len + 3];
+
+		/* Verify PARAMETERS tag is (82), and final check that there is
+		 * enough space in the packet to read everything.
+		 */
+		if (skb->data[aid_len + 2] != NFC_EVT_TRANSACTION_PARAMS_TAG ||
+		    skb->len < aid_len + 4 + params_len)
+			return -EPROTO;
+
+		transaction = devm_kzalloc(dev, sizeof(*transaction) +
+					   params_len, GFP_KERNEL);
+		if (!transaction)
+			return -ENOMEM;
+
+		transaction->aid_len = aid_len;
+		transaction->params_len = params_len;
+
+		memcpy(transaction->aid, &skb->data[2], aid_len);
+		memcpy(transaction->params, &skb->data[aid_len + 4],
+		       params_len);
+
+		r = nfc_se_transaction(ndev->nfc_dev, host, transaction);
+		break;
+	default:
+		nfc_err(&ndev->nfc_dev->dev, "Unexpected event on connectivity gate\n");
+		return 1;
+	}
+	kfree_skb(skb);
+	return r;
+}
+
+void st_nci_hci_event_received(struct nci_dev *ndev, u8 pipe,
+				 u8 event, struct sk_buff *skb)
+{
+	u8 gate = ndev->hci_dev->pipes[pipe].gate;
+	u8 host = ndev->hci_dev->pipes[pipe].host;
+
+	switch (gate) {
+	case NCI_HCI_ADMIN_GATE:
+		st_nci_hci_admin_event_received(ndev, event, skb);
+	break;
+	case ST_NCI_APDU_READER_GATE:
+		st_nci_hci_apdu_reader_event_received(ndev, event, skb);
+	break;
+	case ST_NCI_CONNECTIVITY_GATE:
+		st_nci_hci_connectivity_event_received(ndev, host, event, skb);
+	break;
+	}
+}
+EXPORT_SYMBOL_GPL(st_nci_hci_event_received);
+
+void st_nci_hci_cmd_received(struct nci_dev *ndev, u8 pipe, u8 cmd,
+			       struct sk_buff *skb)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+	u8 gate = ndev->hci_dev->pipes[pipe].gate;
+
+	pr_debug("cmd: %x\n", cmd);
+
+	switch (cmd) {
+	case NCI_HCI_ANY_OPEN_PIPE:
+		if (gate != ST_NCI_APDU_READER_GATE &&
+		    ndev->hci_dev->pipes[pipe].host != ST_NCI_UICC_HOST_ID)
+			ndev->hci_dev->count_pipes++;
+
+		if (ndev->hci_dev->count_pipes ==
+		    ndev->hci_dev->expected_pipes) {
+			del_timer_sync(&info->se_info.se_active_timer);
+			info->se_info.se_active = false;
+			ndev->hci_dev->count_pipes = 0;
+			complete(&info->se_info.req_completion);
+		}
+	break;
+	}
+}
+EXPORT_SYMBOL_GPL(st_nci_hci_cmd_received);
+
+static int st_nci_control_se(struct nci_dev *ndev, u8 se_idx,
+			     u8 state)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+	int r, i;
+	struct sk_buff *sk_host_list;
+	u8 host_id;
+
+	switch (se_idx) {
+	case ST_NCI_UICC_HOST_ID:
+		ndev->hci_dev->count_pipes = 0;
+		ndev->hci_dev->expected_pipes = ST_NCI_SE_COUNT_PIPE_UICC;
+		break;
+	case ST_NCI_ESE_HOST_ID:
+		ndev->hci_dev->count_pipes = 0;
+		ndev->hci_dev->expected_pipes = ST_NCI_SE_COUNT_PIPE_EMBEDDED;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * Wait for an EVT_HOT_PLUG in order to
+	 * retrieve a relevant host list.
+	 */
+	reinit_completion(&info->se_info.req_completion);
+	r = nci_nfcee_mode_set(ndev, se_idx, state);
+	if (r != NCI_STATUS_OK)
+		return r;
+
+	mod_timer(&info->se_info.se_active_timer, jiffies +
+		msecs_to_jiffies(ST_NCI_SE_TO_HOT_PLUG));
+	info->se_info.se_active = true;
+
+	/* Ignore return value and check in any case the host_list */
+	wait_for_completion_interruptible(&info->se_info.req_completion);
+
+	/* There might be some "collision" after receiving a HOT_PLUG event
+	 * This may cause the CLF to not answer to the next hci command.
+	 * There is no possible synchronization to prevent this.
+	 * Adding a small delay is the only way to solve the issue.
+	 */
+	if (info->se_info.se_status->is_ese_present &&
+	    info->se_info.se_status->is_uicc_present)
+		usleep_range(15000, 20000);
+
+	r = nci_hci_get_param(ndev, NCI_HCI_ADMIN_GATE,
+			NCI_HCI_ADMIN_PARAM_HOST_LIST, &sk_host_list);
+	if (r != NCI_HCI_ANY_OK)
+		return r;
+
+	for (i = 0; i < sk_host_list->len &&
+		sk_host_list->data[i] != se_idx; i++)
+		;
+	host_id = sk_host_list->data[i];
+	kfree_skb(sk_host_list);
+	if (state == ST_NCI_SE_MODE_ON && host_id == se_idx)
+		return se_idx;
+	else if (state == ST_NCI_SE_MODE_OFF && host_id != se_idx)
+		return se_idx;
+
+	return -1;
+}
+
+int st_nci_disable_se(struct nci_dev *ndev, u32 se_idx)
+{
+	int r;
+
+	/*
+	 * According to upper layer, se_idx == NFC_SE_UICC when
+	 * info->se_info.se_status->is_uicc_enable is true should never happen
+	 * Same for eSE.
+	 */
+	r = st_nci_control_se(ndev, se_idx, ST_NCI_SE_MODE_OFF);
+	if (r < 0) {
+		/* Do best effort to release SWP */
+		if (se_idx == NFC_SE_EMBEDDED) {
+			r = nci_hci_send_event(ndev, ST_NCI_APDU_READER_GATE,
+					ST_NCI_EVT_SE_END_OF_APDU_TRANSFER,
+					NULL, 0);
+		}
+		return r;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(st_nci_disable_se);
+
+int st_nci_enable_se(struct nci_dev *ndev, u32 se_idx)
+{
+	int r;
+
+	/*
+	 * According to upper layer, se_idx == NFC_SE_UICC when
+	 * info->se_info.se_status->is_uicc_enable is true should never happen.
+	 * Same for eSE.
+	 */
+	r = st_nci_control_se(ndev, se_idx, ST_NCI_SE_MODE_ON);
+	if (r == ST_NCI_ESE_HOST_ID) {
+		st_nci_se_get_atr(ndev);
+		r = nci_hci_send_event(ndev, ST_NCI_APDU_READER_GATE,
+				ST_NCI_EVT_SE_SOFT_RESET, NULL, 0);
+	}
+
+	if (r < 0) {
+		/*
+		 * The activation procedure failed, the secure element
+		 * is not connected. Remove from the list.
+		 */
+		nfc_remove_se(ndev->nfc_dev, se_idx);
+		return r;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(st_nci_enable_se);
+
+static int st_nci_hci_network_init(struct nci_dev *ndev)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+	struct core_conn_create_dest_spec_params *dest_params;
+	struct dest_spec_params spec_params;
+	struct nci_conn_info    *conn_info;
+	int r, dev_num;
+
+	dest_params =
+		kzalloc(sizeof(struct core_conn_create_dest_spec_params) +
+			sizeof(struct dest_spec_params), GFP_KERNEL);
+	if (dest_params == NULL)
+		return -ENOMEM;
+
+	dest_params->type = NCI_DESTINATION_SPECIFIC_PARAM_NFCEE_TYPE;
+	dest_params->length = sizeof(struct dest_spec_params);
+	spec_params.id = ndev->hci_dev->nfcee_id;
+	spec_params.protocol = NCI_NFCEE_INTERFACE_HCI_ACCESS;
+	memcpy(dest_params->value, &spec_params,
+	       sizeof(struct dest_spec_params));
+	r = nci_core_conn_create(ndev, NCI_DESTINATION_NFCEE, 1,
+				 sizeof(struct core_conn_create_dest_spec_params) +
+				 sizeof(struct dest_spec_params),
+				 dest_params);
+	if (r != NCI_STATUS_OK)
+		goto free_dest_params;
+
+	conn_info = ndev->hci_dev->conn_info;
+	if (!conn_info)
+		goto free_dest_params;
+
+	ndev->hci_dev->init_data.gate_count = ARRAY_SIZE(st_nci_gates);
+	memcpy(ndev->hci_dev->init_data.gates, st_nci_gates,
+	       sizeof(st_nci_gates));
+
+	/*
+	 * Session id must include the driver name + i2c bus addr
+	 * persistent info to discriminate 2 identical chips
+	 */
+	dev_num = find_first_zero_bit(dev_mask, ST_NCI_NUM_DEVICES);
+	if (dev_num >= ST_NCI_NUM_DEVICES) {
+		r = -ENODEV;
+		goto free_dest_params;
+	}
+
+	scnprintf(ndev->hci_dev->init_data.session_id,
+		  sizeof(ndev->hci_dev->init_data.session_id),
+		  "%s%2x", "ST21BH", dev_num);
+
+	r = nci_hci_dev_session_init(ndev);
+	if (r != NCI_HCI_ANY_OK)
+		goto free_dest_params;
+
+	/*
+	 * In factory mode, we prevent secure elements activation
+	 * by disabling nfcee on the current HCI connection id.
+	 * HCI will be used here only for proprietary commands.
+	 */
+	if (test_bit(ST_NCI_FACTORY_MODE, &info->flags))
+		r = nci_nfcee_mode_set(ndev,
+				       ndev->hci_dev->conn_info->dest_params->id,
+				       NCI_NFCEE_DISABLE);
+	else
+		r = nci_nfcee_mode_set(ndev,
+				       ndev->hci_dev->conn_info->dest_params->id,
+				       NCI_NFCEE_ENABLE);
+
+free_dest_params:
+	kfree(dest_params);
+	return r;
+}
+
+int st_nci_discover_se(struct nci_dev *ndev)
+{
+	u8 white_list[2];
+	int r, wl_size = 0;
+	int se_count = 0;
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	r = st_nci_hci_network_init(ndev);
+	if (r != 0)
+		return r;
+
+	if (test_bit(ST_NCI_FACTORY_MODE, &info->flags))
+		return 0;
+
+	if (info->se_info.se_status->is_uicc_present)
+		white_list[wl_size++] = ST_NCI_UICC_HOST_ID;
+	if (info->se_info.se_status->is_ese_present)
+		white_list[wl_size++] = ST_NCI_ESE_HOST_ID;
+
+	if (wl_size) {
+		r = nci_hci_set_param(ndev, NCI_HCI_ADMIN_GATE,
+				      NCI_HCI_ADMIN_PARAM_WHITELIST,
+				      white_list, wl_size);
+		if (r != NCI_HCI_ANY_OK)
+			return r;
+	}
+
+	if (info->se_info.se_status->is_uicc_present) {
+		nfc_add_se(ndev->nfc_dev, ST_NCI_UICC_HOST_ID, NFC_SE_UICC);
+		se_count++;
+	}
+
+	if (info->se_info.se_status->is_ese_present) {
+		nfc_add_se(ndev->nfc_dev, ST_NCI_ESE_HOST_ID, NFC_SE_EMBEDDED);
+		se_count++;
+	}
+
+	return !se_count;
+}
+EXPORT_SYMBOL_GPL(st_nci_discover_se);
+
+int st_nci_se_io(struct nci_dev *ndev, u32 se_idx,
+		       u8 *apdu, size_t apdu_length,
+		       se_io_cb_t cb, void *cb_context)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	switch (se_idx) {
+	case ST_NCI_ESE_HOST_ID:
+		info->se_info.cb = cb;
+		info->se_info.cb_context = cb_context;
+		mod_timer(&info->se_info.bwi_timer, jiffies +
+			  msecs_to_jiffies(info->se_info.wt_timeout));
+		info->se_info.bwi_active = true;
+		return nci_hci_send_event(ndev, ST_NCI_APDU_READER_GATE,
+					ST_NCI_EVT_TRANSMIT_DATA, apdu,
+					apdu_length);
+	default:
+		return -ENODEV;
+	}
+}
+EXPORT_SYMBOL(st_nci_se_io);
+
+static void st_nci_se_wt_timeout(struct timer_list *t)
+{
+	/*
+	 * No answer from the secure element
+	 * within the defined timeout.
+	 * Let's send a reset request as recovery procedure.
+	 * According to the situation, we first try to send a software reset
+	 * to the secure element. If the next command is still not
+	 * answering in time, we send to the CLF a secure element hardware
+	 * reset request.
+	 */
+	/* hardware reset managed through VCC_UICC_OUT power supply */
+	u8 param = 0x01;
+	struct st_nci_info *info = from_timer(info, t, se_info.bwi_timer);
+
+	info->se_info.bwi_active = false;
+
+	if (!info->se_info.xch_error) {
+		info->se_info.xch_error = true;
+		nci_hci_send_event(info->ndlc->ndev, ST_NCI_APDU_READER_GATE,
+				ST_NCI_EVT_SE_SOFT_RESET, NULL, 0);
+	} else {
+		info->se_info.xch_error = false;
+		nci_hci_send_event(info->ndlc->ndev, ST_NCI_DEVICE_MGNT_GATE,
+				ST_NCI_EVT_SE_HARD_RESET, &param, 1);
+	}
+	info->se_info.cb(info->se_info.cb_context, NULL, 0, -ETIME);
+}
+
+static void st_nci_se_activation_timeout(struct timer_list *t)
+{
+	struct st_nci_info *info = from_timer(info, t,
+					      se_info.se_active_timer);
+
+	info->se_info.se_active = false;
+
+	complete(&info->se_info.req_completion);
+}
+
+int st_nci_se_init(struct nci_dev *ndev, struct st_nci_se_status *se_status)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	init_completion(&info->se_info.req_completion);
+	/* initialize timers */
+	timer_setup(&info->se_info.bwi_timer, st_nci_se_wt_timeout, 0);
+	info->se_info.bwi_active = false;
+
+	timer_setup(&info->se_info.se_active_timer,
+		    st_nci_se_activation_timeout, 0);
+	info->se_info.se_active = false;
+
+	info->se_info.xch_error = false;
+
+	info->se_info.wt_timeout =
+		ST_NCI_BWI_TO_TIMEOUT(ST_NCI_ATR_DEFAULT_BWI);
+
+	info->se_info.se_status = se_status;
+
+	return 0;
+}
+EXPORT_SYMBOL(st_nci_se_init);
+
+void st_nci_se_deinit(struct nci_dev *ndev)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	if (info->se_info.bwi_active)
+		del_timer_sync(&info->se_info.bwi_timer);
+	if (info->se_info.se_active)
+		del_timer_sync(&info->se_info.se_active_timer);
+
+	info->se_info.se_active = false;
+	info->se_info.bwi_active = false;
+}
+EXPORT_SYMBOL(st_nci_se_deinit);
+