Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 607 insertions, 0 deletions

diff --git a/drivers/nfc/st21nfca/i2c.c b/drivers/nfc/st21nfca/i2c.c
new file mode 100644
index 000000000..55f7a2391
--- /dev/null
+++ b/drivers/nfc/st21nfca/i2c.c
@@ -0,0 +1,607 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * I2C Link Layer for ST21NFCA HCI based Driver
+ * Copyright (C) 2014  STMicroelectronics SAS. All rights reserved.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/crc-ccitt.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <linux/acpi.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/nfc.h>
+#include <linux/firmware.h>
+
+#include <net/nfc/hci.h>
+#include <net/nfc/llc.h>
+#include <net/nfc/nfc.h>
+
+#include "st21nfca.h"
+
+/*
+ * Every frame starts with ST21NFCA_SOF_EOF and ends with ST21NFCA_SOF_EOF.
+ * Because ST21NFCA_SOF_EOF is a possible data value, there is a mecanism
+ * called byte stuffing has been introduced.
+ *
+ * if byte == ST21NFCA_SOF_EOF or ST21NFCA_ESCAPE_BYTE_STUFFING
+ * - insert ST21NFCA_ESCAPE_BYTE_STUFFING (escape byte)
+ * - xor byte with ST21NFCA_BYTE_STUFFING_MASK
+ */
+#define ST21NFCA_SOF_EOF		0x7e
+#define ST21NFCA_BYTE_STUFFING_MASK	0x20
+#define ST21NFCA_ESCAPE_BYTE_STUFFING	0x7d
+
+/* SOF + 00 */
+#define ST21NFCA_FRAME_HEADROOM			2
+
+/* 2 bytes crc + EOF */
+#define ST21NFCA_FRAME_TAILROOM 3
+#define IS_START_OF_FRAME(buf) (buf[0] == ST21NFCA_SOF_EOF && \
+				buf[1] == 0)
+
+#define ST21NFCA_HCI_DRIVER_NAME "st21nfca_hci"
+#define ST21NFCA_HCI_I2C_DRIVER_NAME "st21nfca_hci_i2c"
+
+struct st21nfca_i2c_phy {
+	struct i2c_client *i2c_dev;
+	struct nfc_hci_dev *hdev;
+
+	struct gpio_desc *gpiod_ena;
+	struct st21nfca_se_status se_status;
+
+	struct sk_buff *pending_skb;
+	int current_read_len;
+	/*
+	 * crc might have fail because i2c macro
+	 * is disable due to other interface activity
+	 */
+	int crc_trials;
+
+	int powered;
+	int run_mode;
+
+	/*
+	 * < 0 if hardware error occured (e.g. i2c err)
+	 * and prevents normal operation.
+	 */
+	int hard_fault;
+	struct mutex phy_lock;
+};
+
+static const u8 len_seq[] = { 16, 24, 12, 29 };
+static const u16 wait_tab[] = { 2, 3, 5, 15, 20, 40};
+
+#define I2C_DUMP_SKB(info, skb)					\
+do {								\
+	pr_debug("%s:\n", info);				\
+	print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET,	\
+		       16, 1, (skb)->data, (skb)->len, 0);	\
+} while (0)
+
+/*
+ * In order to get the CLF in a known state we generate an internal reboot
+ * using a proprietary command.
+ * Once the reboot is completed, we expect to receive a ST21NFCA_SOF_EOF
+ * fill buffer.
+ */
+static int st21nfca_hci_platform_init(struct st21nfca_i2c_phy *phy)
+{
+	u16 wait_reboot[] = { 50, 300, 1000 };
+	char reboot_cmd[] = { 0x7E, 0x66, 0x48, 0xF6, 0x7E };
+	u8 tmp[ST21NFCA_HCI_LLC_MAX_SIZE];
+	int i, r = -1;
+
+	for (i = 0; i < ARRAY_SIZE(wait_reboot) && r < 0; i++) {
+		r = i2c_master_send(phy->i2c_dev, reboot_cmd,
+				    sizeof(reboot_cmd));
+		if (r < 0)
+			msleep(wait_reboot[i]);
+	}
+	if (r < 0)
+		return r;
+
+	/* CLF is spending about 20ms to do an internal reboot */
+	msleep(20);
+	r = -1;
+	for (i = 0; i < ARRAY_SIZE(wait_reboot) && r < 0; i++) {
+		r = i2c_master_recv(phy->i2c_dev, tmp,
+				    ST21NFCA_HCI_LLC_MAX_SIZE);
+		if (r < 0)
+			msleep(wait_reboot[i]);
+	}
+	if (r < 0)
+		return r;
+
+	for (i = 0; i < ST21NFCA_HCI_LLC_MAX_SIZE &&
+		tmp[i] == ST21NFCA_SOF_EOF; i++)
+		;
+
+	if (r != ST21NFCA_HCI_LLC_MAX_SIZE)
+		return -ENODEV;
+
+	usleep_range(1000, 1500);
+	return 0;
+}
+
+static int st21nfca_hci_i2c_enable(void *phy_id)
+{
+	struct st21nfca_i2c_phy *phy = phy_id;
+
+	gpiod_set_value(phy->gpiod_ena, 1);
+	phy->powered = 1;
+	phy->run_mode = ST21NFCA_HCI_MODE;
+
+	usleep_range(10000, 15000);
+
+	return 0;
+}
+
+static void st21nfca_hci_i2c_disable(void *phy_id)
+{
+	struct st21nfca_i2c_phy *phy = phy_id;
+
+	gpiod_set_value(phy->gpiod_ena, 0);
+
+	phy->powered = 0;
+}
+
+static void st21nfca_hci_add_len_crc(struct sk_buff *skb)
+{
+	u16 crc;
+	u8 tmp;
+
+	*(u8 *)skb_push(skb, 1) = 0;
+
+	crc = crc_ccitt(0xffff, skb->data, skb->len);
+	crc = ~crc;
+
+	tmp = crc & 0x00ff;
+	skb_put_u8(skb, tmp);
+
+	tmp = (crc >> 8) & 0x00ff;
+	skb_put_u8(skb, tmp);
+}
+
+static void st21nfca_hci_remove_len_crc(struct sk_buff *skb)
+{
+	skb_pull(skb, ST21NFCA_FRAME_HEADROOM);
+	skb_trim(skb, skb->len - ST21NFCA_FRAME_TAILROOM);
+}
+
+/*
+ * Writing a frame must not return the number of written bytes.
+ * It must return either zero for success, or <0 for error.
+ * In addition, it must not alter the skb
+ */
+static int st21nfca_hci_i2c_write(void *phy_id, struct sk_buff *skb)
+{
+	int r = -1, i, j;
+	struct st21nfca_i2c_phy *phy = phy_id;
+	struct i2c_client *client = phy->i2c_dev;
+	u8 tmp[ST21NFCA_HCI_LLC_MAX_SIZE * 2];
+
+	I2C_DUMP_SKB("st21nfca_hci_i2c_write", skb);
+
+	if (phy->hard_fault != 0)
+		return phy->hard_fault;
+
+	/*
+	 * Compute CRC before byte stuffing computation on frame
+	 * Note st21nfca_hci_add_len_crc is doing a byte stuffing
+	 * on its own value
+	 */
+	st21nfca_hci_add_len_crc(skb);
+
+	/* add ST21NFCA_SOF_EOF on tail */
+	skb_put_u8(skb, ST21NFCA_SOF_EOF);
+	/* add ST21NFCA_SOF_EOF on head */
+	*(u8 *)skb_push(skb, 1) = ST21NFCA_SOF_EOF;
+
+	/*
+	 * Compute byte stuffing
+	 * if byte == ST21NFCA_SOF_EOF or ST21NFCA_ESCAPE_BYTE_STUFFING
+	 * insert ST21NFCA_ESCAPE_BYTE_STUFFING (escape byte)
+	 * xor byte with ST21NFCA_BYTE_STUFFING_MASK
+	 */
+	tmp[0] = skb->data[0];
+	for (i = 1, j = 1; i < skb->len - 1; i++, j++) {
+		if (skb->data[i] == ST21NFCA_SOF_EOF
+		    || skb->data[i] == ST21NFCA_ESCAPE_BYTE_STUFFING) {
+			tmp[j] = ST21NFCA_ESCAPE_BYTE_STUFFING;
+			j++;
+			tmp[j] = skb->data[i] ^ ST21NFCA_BYTE_STUFFING_MASK;
+		} else {
+			tmp[j] = skb->data[i];
+		}
+	}
+	tmp[j] = skb->data[i];
+	j++;
+
+	/*
+	 * Manage sleep mode
+	 * Try 3 times to send data with delay between each
+	 */
+	mutex_lock(&phy->phy_lock);
+	for (i = 0; i < ARRAY_SIZE(wait_tab) && r < 0; i++) {
+		r = i2c_master_send(client, tmp, j);
+		if (r < 0)
+			msleep(wait_tab[i]);
+	}
+	mutex_unlock(&phy->phy_lock);
+
+	if (r >= 0) {
+		if (r != j)
+			r = -EREMOTEIO;
+		else
+			r = 0;
+	}
+
+	st21nfca_hci_remove_len_crc(skb);
+
+	return r;
+}
+
+static int get_frame_size(u8 *buf, int buflen)
+{
+	int len = 0;
+
+	if (buf[len + 1] == ST21NFCA_SOF_EOF)
+		return 0;
+
+	for (len = 1; len < buflen && buf[len] != ST21NFCA_SOF_EOF; len++)
+		;
+
+	return len;
+}
+
+static int check_crc(u8 *buf, int buflen)
+{
+	u16 crc;
+
+	crc = crc_ccitt(0xffff, buf, buflen - 2);
+	crc = ~crc;
+
+	if (buf[buflen - 2] != (crc & 0xff) || buf[buflen - 1] != (crc >> 8)) {
+		pr_err(ST21NFCA_HCI_DRIVER_NAME
+		       ": CRC error 0x%x != 0x%x 0x%x\n", crc, buf[buflen - 1],
+		       buf[buflen - 2]);
+
+		pr_info(DRIVER_DESC ": %s : BAD CRC\n", __func__);
+		print_hex_dump(KERN_DEBUG, "crc: ", DUMP_PREFIX_NONE,
+			       16, 2, buf, buflen, false);
+		return -EPERM;
+	}
+	return 0;
+}
+
+/*
+ * Prepare received data for upper layer.
+ * Received data include byte stuffing, crc and sof/eof
+ * which is not usable by hci part.
+ * returns:
+ * frame size without sof/eof, header and byte stuffing
+ * -EBADMSG : frame was incorrect and discarded
+ */
+static int st21nfca_hci_i2c_repack(struct sk_buff *skb)
+{
+	int i, j, r, size;
+
+	if (skb->len < 1 || (skb->len > 1 && skb->data[1] != 0))
+		return -EBADMSG;
+
+	size = get_frame_size(skb->data, skb->len);
+	if (size > 0) {
+		skb_trim(skb, size);
+		/* remove ST21NFCA byte stuffing for upper layer */
+		for (i = 1, j = 0; i < skb->len; i++) {
+			if (skb->data[i + j] ==
+					(u8) ST21NFCA_ESCAPE_BYTE_STUFFING) {
+				skb->data[i] = skb->data[i + j + 1]
+						| ST21NFCA_BYTE_STUFFING_MASK;
+				i++;
+				j++;
+			}
+			skb->data[i] = skb->data[i + j];
+		}
+		/* remove byte stuffing useless byte */
+		skb_trim(skb, i - j);
+		/* remove ST21NFCA_SOF_EOF from head */
+		skb_pull(skb, 1);
+
+		r = check_crc(skb->data, skb->len);
+		if (r != 0)
+			return -EBADMSG;
+
+		/* remove headbyte */
+		skb_pull(skb, 1);
+		/* remove crc. Byte Stuffing is already removed here */
+		skb_trim(skb, skb->len - 2);
+		return skb->len;
+	}
+	return 0;
+}
+
+/*
+ * Reads an shdlc frame and returns it in a newly allocated sk_buff. Guarantees
+ * that i2c bus will be flushed and that next read will start on a new frame.
+ * returned skb contains only LLC header and payload.
+ * returns:
+ * frame size : if received frame is complete (find ST21NFCA_SOF_EOF at
+ * end of read)
+ * -EAGAIN : if received frame is incomplete (not find ST21NFCA_SOF_EOF
+ * at end of read)
+ * -EREMOTEIO : i2c read error (fatal)
+ * -EBADMSG : frame was incorrect and discarded
+ * (value returned from st21nfca_hci_i2c_repack)
+ * -EIO : if no ST21NFCA_SOF_EOF is found after reaching
+ * the read length end sequence
+ */
+static int st21nfca_hci_i2c_read(struct st21nfca_i2c_phy *phy,
+				 struct sk_buff *skb)
+{
+	int r, i;
+	u8 len;
+	u8 buf[ST21NFCA_HCI_LLC_MAX_PAYLOAD];
+	struct i2c_client *client = phy->i2c_dev;
+
+	if (phy->current_read_len < ARRAY_SIZE(len_seq)) {
+		len = len_seq[phy->current_read_len];
+
+		/*
+		 * Add retry mecanism
+		 * Operation on I2C interface may fail in case of operation on
+		 * RF or SWP interface
+		 */
+		r = 0;
+		mutex_lock(&phy->phy_lock);
+		for (i = 0; i < ARRAY_SIZE(wait_tab) && r <= 0; i++) {
+			r = i2c_master_recv(client, buf, len);
+			if (r < 0)
+				msleep(wait_tab[i]);
+		}
+		mutex_unlock(&phy->phy_lock);
+
+		if (r != len) {
+			phy->current_read_len = 0;
+			return -EREMOTEIO;
+		}
+
+		/*
+		 * The first read sequence does not start with SOF.
+		 * Data is corrupeted so we drop it.
+		 */
+		if (!phy->current_read_len && !IS_START_OF_FRAME(buf)) {
+			skb_trim(skb, 0);
+			phy->current_read_len = 0;
+			return -EIO;
+		} else if (phy->current_read_len && IS_START_OF_FRAME(buf)) {
+			/*
+			 * Previous frame transmission was interrupted and
+			 * the frame got repeated.
+			 * Received frame start with ST21NFCA_SOF_EOF + 00.
+			 */
+			skb_trim(skb, 0);
+			phy->current_read_len = 0;
+		}
+
+		skb_put_data(skb, buf, len);
+
+		if (skb->data[skb->len - 1] == ST21NFCA_SOF_EOF) {
+			phy->current_read_len = 0;
+			return st21nfca_hci_i2c_repack(skb);
+		}
+		phy->current_read_len++;
+		return -EAGAIN;
+	}
+	return -EIO;
+}
+
+/*
+ * Reads an shdlc frame from the chip. This is not as straightforward as it
+ * seems. The frame format is data-crc, and corruption can occur anywhere
+ * while transiting on i2c bus, such that we could read an invalid data.
+ * The tricky case is when we read a corrupted data or crc. We must detect
+ * this here in order to determine that data can be transmitted to the hci
+ * core. This is the reason why we check the crc here.
+ * The CLF will repeat a frame until we send a RR on that frame.
+ *
+ * On ST21NFCA, IRQ goes in idle when read starts. As no size information are
+ * available in the incoming data, other IRQ might come. Every IRQ will trigger
+ * a read sequence with different length and will fill the current frame.
+ * The reception is complete once we reach a ST21NFCA_SOF_EOF.
+ */
+static irqreturn_t st21nfca_hci_irq_thread_fn(int irq, void *phy_id)
+{
+	struct st21nfca_i2c_phy *phy = phy_id;
+
+	int r;
+
+	if (!phy || irq != phy->i2c_dev->irq) {
+		WARN_ON_ONCE(1);
+		return IRQ_NONE;
+	}
+
+	if (phy->hard_fault != 0)
+		return IRQ_HANDLED;
+
+	r = st21nfca_hci_i2c_read(phy, phy->pending_skb);
+	if (r == -EREMOTEIO) {
+		phy->hard_fault = r;
+
+		nfc_hci_recv_frame(phy->hdev, NULL);
+
+		return IRQ_HANDLED;
+	} else if (r == -EAGAIN || r == -EIO) {
+		return IRQ_HANDLED;
+	} else if (r == -EBADMSG && phy->crc_trials < ARRAY_SIZE(wait_tab)) {
+		/*
+		 * With ST21NFCA, only one interface (I2C, RF or SWP)
+		 * may be active at a time.
+		 * Having incorrect crc is usually due to i2c macrocell
+		 * deactivation in the middle of a transmission.
+		 * It may generate corrupted data on i2c.
+		 * We give sometime to get i2c back.
+		 * The complete frame will be repeated.
+		 */
+		msleep(wait_tab[phy->crc_trials]);
+		phy->crc_trials++;
+		phy->current_read_len = 0;
+		kfree_skb(phy->pending_skb);
+	} else if (r > 0) {
+		/*
+		 * We succeeded to read data from the CLF and
+		 * data is valid.
+		 * Reset counter.
+		 */
+		nfc_hci_recv_frame(phy->hdev, phy->pending_skb);
+		phy->crc_trials = 0;
+	} else {
+		kfree_skb(phy->pending_skb);
+	}
+
+	phy->pending_skb = alloc_skb(ST21NFCA_HCI_LLC_MAX_SIZE * 2, GFP_KERNEL);
+	if (phy->pending_skb == NULL) {
+		phy->hard_fault = -ENOMEM;
+		nfc_hci_recv_frame(phy->hdev, NULL);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static const struct nfc_phy_ops i2c_phy_ops = {
+	.write = st21nfca_hci_i2c_write,
+	.enable = st21nfca_hci_i2c_enable,
+	.disable = st21nfca_hci_i2c_disable,
+};
+
+static const struct acpi_gpio_params enable_gpios = { 1, 0, false };
+
+static const struct acpi_gpio_mapping acpi_st21nfca_gpios[] = {
+	{ "enable-gpios", &enable_gpios, 1 },
+	{},
+};
+
+static int st21nfca_hci_i2c_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct st21nfca_i2c_phy *phy;
+	int r;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		nfc_err(&client->dev, "Need I2C_FUNC_I2C\n");
+		return -ENODEV;
+	}
+
+	phy = devm_kzalloc(&client->dev, sizeof(struct st21nfca_i2c_phy),
+			   GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	phy->i2c_dev = client;
+	phy->pending_skb = alloc_skb(ST21NFCA_HCI_LLC_MAX_SIZE * 2, GFP_KERNEL);
+	if (phy->pending_skb == NULL)
+		return -ENOMEM;
+
+	phy->current_read_len = 0;
+	phy->crc_trials = 0;
+	mutex_init(&phy->phy_lock);
+	i2c_set_clientdata(client, phy);
+
+	r = devm_acpi_dev_add_driver_gpios(dev, acpi_st21nfca_gpios);
+	if (r)
+		dev_dbg(dev, "Unable to add GPIO mapping table\n");
+
+	/* Get EN GPIO from resource provider */
+	phy->gpiod_ena = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(phy->gpiod_ena)) {
+		nfc_err(dev, "Unable to get ENABLE GPIO\n");
+		r = PTR_ERR(phy->gpiod_ena);
+		goto out_free;
+	}
+
+	phy->se_status.is_ese_present =
+			device_property_read_bool(&client->dev, "ese-present");
+	phy->se_status.is_uicc_present =
+			device_property_read_bool(&client->dev, "uicc-present");
+
+	r = st21nfca_hci_platform_init(phy);
+	if (r < 0) {
+		nfc_err(&client->dev, "Unable to reboot st21nfca\n");
+		goto out_free;
+	}
+
+	r = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+				st21nfca_hci_irq_thread_fn,
+				IRQF_ONESHOT,
+				ST21NFCA_HCI_DRIVER_NAME, phy);
+	if (r < 0) {
+		nfc_err(&client->dev, "Unable to register IRQ handler\n");
+		goto out_free;
+	}
+
+	r = st21nfca_hci_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME,
+			       ST21NFCA_FRAME_HEADROOM,
+			       ST21NFCA_FRAME_TAILROOM,
+			       ST21NFCA_HCI_LLC_MAX_PAYLOAD,
+			       &phy->hdev,
+			       &phy->se_status);
+	if (r)
+		goto out_free;
+
+	return 0;
+
+out_free:
+	kfree_skb(phy->pending_skb);
+	return r;
+}
+
+static void st21nfca_hci_i2c_remove(struct i2c_client *client)
+{
+	struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client);
+
+	st21nfca_hci_remove(phy->hdev);
+
+	if (phy->powered)
+		st21nfca_hci_i2c_disable(phy);
+	kfree_skb(phy->pending_skb);
+}
+
+static const struct i2c_device_id st21nfca_hci_i2c_id_table[] = {
+	{ST21NFCA_HCI_DRIVER_NAME, 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, st21nfca_hci_i2c_id_table);
+
+static const struct acpi_device_id st21nfca_hci_i2c_acpi_match[] __maybe_unused = {
+	{"SMO2100", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, st21nfca_hci_i2c_acpi_match);
+
+static const struct of_device_id of_st21nfca_i2c_match[] __maybe_unused = {
+	{ .compatible = "st,st21nfca-i2c", },
+	{ .compatible = "st,st21nfca_i2c", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, of_st21nfca_i2c_match);
+
+static struct i2c_driver st21nfca_hci_i2c_driver = {
+	.driver = {
+		.name = ST21NFCA_HCI_I2C_DRIVER_NAME,
+		.of_match_table = of_match_ptr(of_st21nfca_i2c_match),
+		.acpi_match_table = ACPI_PTR(st21nfca_hci_i2c_acpi_match),
+	},
+	.probe_new = st21nfca_hci_i2c_probe,
+	.id_table = st21nfca_hci_i2c_id_table,
+	.remove = st21nfca_hci_i2c_remove,
+};
+module_i2c_driver(st21nfca_hci_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);