Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 186 insertions, 0 deletions

diff --git a/drivers/nubus/proc.c b/drivers/nubus/proc.c
new file mode 100644
index 000000000..1fd667852
--- /dev/null
+++ b/drivers/nubus/proc.c
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0
+/* drivers/nubus/proc.c: Proc FS interface for NuBus.
+
+   By David Huggins-Daines <dhd@debian.org>
+
+   Much code and many ideas from drivers/pci/proc.c:
+   Copyright (c) 1997, 1998 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+
+   This is initially based on the Zorro and PCI interfaces.  However,
+   it works somewhat differently.  The intent is to provide a
+   structure in /proc analogous to the structure of the NuBus ROM
+   resources.
+
+   Therefore each board function gets a directory, which may in turn
+   contain subdirectories.  Each slot resource is a file.  Unrecognized
+   resources are empty files, since every resource ID requires a special
+   case (e.g. if the resource ID implies a directory or block, then its
+   value has to be interpreted as a slot ROM pointer etc.).
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/nubus.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <asm/byteorder.h>
+
+/*
+ * /proc/bus/nubus/devices stuff
+ */
+
+static int
+nubus_devices_proc_show(struct seq_file *m, void *v)
+{
+	struct nubus_rsrc *fres;
+
+	for_each_func_rsrc(fres)
+		seq_printf(m, "%x\t%04x %04x %04x %04x\t%08lx\n",
+			   fres->board->slot, fres->category, fres->type,
+			   fres->dr_sw, fres->dr_hw, fres->board->slot_addr);
+	return 0;
+}
+
+static struct proc_dir_entry *proc_bus_nubus_dir;
+
+/*
+ * /proc/bus/nubus/x/ stuff
+ */
+
+struct proc_dir_entry *nubus_proc_add_board(struct nubus_board *board)
+{
+	char name[2];
+
+	if (!proc_bus_nubus_dir)
+		return NULL;
+	snprintf(name, sizeof(name), "%x", board->slot);
+	return proc_mkdir(name, proc_bus_nubus_dir);
+}
+
+/* The PDE private data for any directory under /proc/bus/nubus/x/
+ * is the bytelanes value for the board in slot x.
+ */
+
+struct proc_dir_entry *nubus_proc_add_rsrc_dir(struct proc_dir_entry *procdir,
+					       const struct nubus_dirent *ent,
+					       struct nubus_board *board)
+{
+	char name[9];
+	int lanes = board->lanes;
+
+	if (!procdir)
+		return NULL;
+	snprintf(name, sizeof(name), "%x", ent->type);
+	return proc_mkdir_data(name, 0555, procdir, (void *)lanes);
+}
+
+/* The PDE private data for a file under /proc/bus/nubus/x/ is a pointer to
+ * an instance of the following structure, which gives the location and size
+ * of the resource data in the slot ROM. For slot resources which hold only a
+ * small integer, this integer value is stored directly and size is set to 0.
+ * A NULL private data pointer indicates an unrecognized resource.
+ */
+
+struct nubus_proc_pde_data {
+	unsigned char *res_ptr;
+	unsigned int res_size;
+};
+
+static struct nubus_proc_pde_data *
+nubus_proc_alloc_pde_data(unsigned char *ptr, unsigned int size)
+{
+	struct nubus_proc_pde_data *pded;
+
+	pded = kmalloc(sizeof(*pded), GFP_KERNEL);
+	if (!pded)
+		return NULL;
+
+	pded->res_ptr = ptr;
+	pded->res_size = size;
+	return pded;
+}
+
+static int nubus_proc_rsrc_show(struct seq_file *m, void *v)
+{
+	struct inode *inode = m->private;
+	struct nubus_proc_pde_data *pded;
+
+	pded = pde_data(inode);
+	if (!pded)
+		return 0;
+
+	if (pded->res_size > m->size)
+		return -EFBIG;
+
+	if (pded->res_size) {
+		int lanes = (int)proc_get_parent_data(inode);
+		struct nubus_dirent ent;
+
+		if (!lanes)
+			return 0;
+
+		ent.mask = lanes;
+		ent.base = pded->res_ptr;
+		ent.data = 0;
+		nubus_seq_write_rsrc_mem(m, &ent, pded->res_size);
+	} else {
+		unsigned int data = (unsigned int)pded->res_ptr;
+
+		seq_putc(m, data >> 16);
+		seq_putc(m, data >> 8);
+		seq_putc(m, data >> 0);
+	}
+	return 0;
+}
+
+void nubus_proc_add_rsrc_mem(struct proc_dir_entry *procdir,
+			     const struct nubus_dirent *ent,
+			     unsigned int size)
+{
+	char name[9];
+	struct nubus_proc_pde_data *pded;
+
+	if (!procdir)
+		return;
+
+	snprintf(name, sizeof(name), "%x", ent->type);
+	if (size)
+		pded = nubus_proc_alloc_pde_data(nubus_dirptr(ent), size);
+	else
+		pded = NULL;
+	proc_create_single_data(name, S_IFREG | 0444, procdir,
+			nubus_proc_rsrc_show, pded);
+}
+
+void nubus_proc_add_rsrc(struct proc_dir_entry *procdir,
+			 const struct nubus_dirent *ent)
+{
+	char name[9];
+	unsigned char *data = (unsigned char *)ent->data;
+
+	if (!procdir)
+		return;
+
+	snprintf(name, sizeof(name), "%x", ent->type);
+	proc_create_single_data(name, S_IFREG | 0444, procdir,
+			nubus_proc_rsrc_show,
+			nubus_proc_alloc_pde_data(data, 0));
+}
+
+/*
+ * /proc/nubus stuff
+ */
+
+void __init nubus_proc_init(void)
+{
+	proc_create_single("nubus", 0, NULL, nubus_proc_show);
+	proc_bus_nubus_dir = proc_mkdir("bus/nubus", NULL);
+	if (!proc_bus_nubus_dir)
+		return;
+	proc_create_single("devices", 0, proc_bus_nubus_dir,
+			nubus_devices_proc_show);
+}