Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

44 files changed, 1207 insertions, 0 deletions

diff --git a/drivers/of/unittest-data/Makefile b/drivers/of/unittest-data/Makefile
new file mode 100644
index 000000000..ea5f4da68
--- /dev/null
+++ b/drivers/of/unittest-data/Makefile
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-y += testcases.dtbo.o
+
+obj-$(CONFIG_OF_OVERLAY) += overlay.dtbo.o \
+			    overlay_0.dtbo.o \
+			    overlay_1.dtbo.o \
+			    overlay_2.dtbo.o \
+			    overlay_3.dtbo.o \
+			    overlay_4.dtbo.o \
+			    overlay_5.dtbo.o \
+			    overlay_6.dtbo.o \
+			    overlay_7.dtbo.o \
+			    overlay_8.dtbo.o \
+			    overlay_9.dtbo.o \
+			    overlay_10.dtbo.o \
+			    overlay_11.dtbo.o \
+			    overlay_12.dtbo.o \
+			    overlay_13.dtbo.o \
+			    overlay_15.dtbo.o \
+			    overlay_16.dtbo.o \
+			    overlay_17.dtbo.o \
+			    overlay_18.dtbo.o \
+			    overlay_19.dtbo.o \
+			    overlay_20.dtbo.o \
+			    overlay_bad_add_dup_node.dtbo.o \
+			    overlay_bad_add_dup_prop.dtbo.o \
+			    overlay_bad_phandle.dtbo.o \
+			    overlay_bad_symbol.dtbo.o \
+			    overlay_base.dtbo.o \
+			    overlay_gpio_01.dtbo.o \
+			    overlay_gpio_02a.dtbo.o \
+			    overlay_gpio_02b.dtbo.o \
+			    overlay_gpio_03.dtbo.o \
+			    overlay_gpio_04a.dtbo.o \
+			    overlay_gpio_04b.dtbo.o
+
+# enable creation of __symbols__ node
+DTC_FLAGS_overlay += -@
+DTC_FLAGS_overlay_bad_phandle += -@
+DTC_FLAGS_overlay_bad_symbol += -@
+DTC_FLAGS_overlay_base += -@
+DTC_FLAGS_testcases += -@
+
+# suppress warnings about intentional errors
+DTC_FLAGS_testcases += -Wno-interrupts_property \
+	-Wno-node_name_vs_property_name \
+	-Wno-interrupt_map
+
+# Apply overlays statically with fdtoverlay.  This is a build time test that
+# the overlays can be applied successfully by fdtoverlay.  This does not
+# guarantee that the overlays can be applied successfully at run time by
+# unittest, but it provides a bit of build time test coverage for those
+# who do not execute unittest.
+#
+# The overlays are applied on top of static_base_1.dtb and static_base_2.dtb to
+# create static_test_1.dtb and static_test_2.dtb.  If fdtoverlay detects an
+# error than the kernel build will fail.  static_test_1.dtb and
+# static_test_2.dtb are not consumed by unittest.
+#
+# Some unittest overlays deliberately contain errors that unittest checks for.
+# These overlays will cause fdtoverlay to fail, and are thus not included
+# in the static test:
+#			  overlay_bad_add_dup_node.dtbo \
+#			  overlay_bad_add_dup_prop.dtbo \
+#			  overlay_bad_phandle.dtbo \
+#			  overlay_bad_symbol.dtbo \
+
+apply_static_overlay_1 := overlay_0.dtbo \
+			  overlay_1.dtbo \
+			  overlay_2.dtbo \
+			  overlay_3.dtbo \
+			  overlay_4.dtbo \
+			  overlay_5.dtbo \
+			  overlay_6.dtbo \
+			  overlay_7.dtbo \
+			  overlay_8.dtbo \
+			  overlay_9.dtbo \
+			  overlay_10.dtbo \
+			  overlay_11.dtbo \
+			  overlay_12.dtbo \
+			  overlay_13.dtbo \
+			  overlay_15.dtbo \
+			  overlay_16.dtbo \
+			  overlay_17.dtbo \
+			  overlay_18.dtbo \
+			  overlay_19.dtbo \
+			  overlay_20.dtbo \
+			  overlay_gpio_01.dtbo \
+			  overlay_gpio_02a.dtbo \
+			  overlay_gpio_02b.dtbo \
+			  overlay_gpio_03.dtbo \
+			  overlay_gpio_04a.dtbo \
+			  overlay_gpio_04b.dtbo
+
+apply_static_overlay_2 := overlay.dtbo
+
+DTC_FLAGS_static_base_1 += -Wno-interrupts_property \
+	-Wno-node_name_vs_property_name \
+	-Wno-interrupt_map
+
+static_test_1-dtbs := static_base_1.dtb $(apply_static_overlay_1)
+static_test_2-dtbs := static_base_2.dtb $(apply_static_overlay_2)
+
+dtb-$(CONFIG_OF_OVERLAY) += static_test_1.dtb static_test_2.dtb
diff --git a/drivers/of/unittest-data/overlay.dtso b/drivers/of/unittest-data/overlay.dtso
new file mode 100644
index 000000000..3bbc59e92
--- /dev/null
+++ b/drivers/of/unittest-data/overlay.dtso
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+&electric_1 {
+
+	status = "okay";
+
+	hvac_2: hvac-large-1 {
+		compatible = "ot,hvac-large";
+		heat-range = < 40 75 >;
+		cool-range = < 65 80 >;
+	};
+};
+
+&rides_1 {
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+	status = "okay";
+
+	ride@100 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		track@30 {
+			incline-up = < 48 32 16 >;
+		};
+
+		track@40 {
+			incline-up = < 47 31 15 >;
+		};
+	};
+
+	ride_200: ride@200 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "ot,ferris-wheel";
+		reg = < 0x00000200 0x100 >;
+		hvac-provider = < &hvac_2 >;
+		hvac-thermostat = < 27 32 > ;
+		hvac-zones = < 12 5 >;
+		hvac-zone-names = "operator", "snack-bar";
+		spin-controller = < &spin_ctrl_1 3 >;
+		spin-rph = < 30 >;
+		gondolas = < 16 >;
+		gondola-capacity = < 6 >;
+
+		ride_200_left: track@10 {
+			reg = < 0x00000010 0x10 >;
+		};
+
+		ride_200_right: track@20 {
+			reg = < 0x00000020 0x10 >;
+		};
+	};
+};
+
+&lights_2 {
+
+	status = "okay";
+	color = "purple", "white", "red", "green";
+	rate = < 3 256 >;
+};
diff --git a/drivers/of/unittest-data/overlay_0.dtso b/drivers/of/unittest-data/overlay_0.dtso
new file mode 100644
index 000000000..ac0f9e0fe
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_0.dtso
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/ {
+	/* overlay_0 - enable using absolute target path */
+
+	fragment@0 {
+		target-path = "/testcase-data/overlay-node/test-bus/test-unittest0";
+		__overlay__ {
+			status = "okay";
+		};
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_1.dtso b/drivers/of/unittest-data/overlay_1.dtso
new file mode 100644
index 000000000..e92a626e2
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_1.dtso
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/ {
+	/* overlay_1 - disable using absolute target path */
+
+	fragment@0 {
+		target-path = "/testcase-data/overlay-node/test-bus/test-unittest1";
+		__overlay__ {
+			status = "disabled";
+		};
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_10.dtso b/drivers/of/unittest-data/overlay_10.dtso
new file mode 100644
index 000000000..73993bf23
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_10.dtso
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/* overlay_10 */
+/* overlays 8, 9, 10, 11 application and removal in bad sequence */
+
+&unittest_test_bus {
+	/* suppress DTC warning */
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	test-unittest10 {
+		compatible = "unittest";
+		status = "okay";
+		reg = <10>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		test-unittest101 {
+			compatible = "unittest";
+			status = "okay";
+			reg = <1>;
+		};
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_11.dtso b/drivers/of/unittest-data/overlay_11.dtso
new file mode 100644
index 000000000..9a79b253a
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_11.dtso
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/* overlay_11 */
+/* overlays 8, 9, 10, 11 application and removal in bad sequence */
+
+&unittest_test_bus {
+	/* suppress DTC warning */
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	test-unittest11 {
+		compatible = "unittest";
+		status = "okay";
+		reg = <11>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		test-unittest111 {
+			compatible = "unittest";
+			status = "okay";
+			reg = <1>;
+		};
+
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_12.dtso b/drivers/of/unittest-data/overlay_12.dtso
new file mode 100644
index 000000000..ca3441e2c
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_12.dtso
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/ {
+	/* overlay_12 - enable using absolute target path (i2c) */
+
+	fragment@0 {
+		target-path = "/testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest12";
+		__overlay__ {
+			status = "okay";
+		};
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_13.dtso b/drivers/of/unittest-data/overlay_13.dtso
new file mode 100644
index 000000000..3c30dec63
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_13.dtso
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/ {
+	/* overlay_13 - disable using absolute target path (i2c) */
+
+	fragment@0 {
+		target-path = "/testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest13";
+		__overlay__ {
+			status = "disabled";
+		};
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_15.dtso b/drivers/of/unittest-data/overlay_15.dtso
new file mode 100644
index 000000000..572849047
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_15.dtso
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/* overlay_15 - mux overlay */
+
+&unittest_i2c_test_bus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	test-unittest15 {
+		reg = <11>;
+		compatible = "unittest-i2c-mux";
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			test-mux-dev@20 {
+				reg = <0x20>;
+				compatible = "unittest-i2c-dev";
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_16.dtso b/drivers/of/unittest-data/overlay_16.dtso
new file mode 100644
index 000000000..80a46dc02
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_16.dtso
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/* overlay_16 - notify test */
+
+&unittest_test_bus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	test-unittest16 {
+		compatible = "unittest";
+		reg = <16>;
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_17.dtso b/drivers/of/unittest-data/overlay_17.dtso
new file mode 100644
index 000000000..5b8a22091
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_17.dtso
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/* overlay_17 - notify test */
+
+&unittest_test_bus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	test-unittest17 {
+		compatible = "unittest";
+		reg = <17>;
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_18.dtso b/drivers/of/unittest-data/overlay_18.dtso
new file mode 100644
index 000000000..dcddd5f6d
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_18.dtso
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/* overlay_18 - notify test */
+
+&unittest_test_bus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	test-unittest18 {
+		compatible = "unittest";
+		reg = <18>;
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_19.dtso b/drivers/of/unittest-data/overlay_19.dtso
new file mode 100644
index 000000000..32b3ba0b6
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_19.dtso
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/* overlay_19 - notify test */
+
+&unittest_test_bus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	test-unittest19 {
+		compatible = "unittest";
+		reg = <19>;
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_2.dtso b/drivers/of/unittest-data/overlay_2.dtso
new file mode 100644
index 000000000..db8684ba8
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_2.dtso
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/* overlay_2 -  enable using label */
+
+&unittest2 {
+	status = "okay";
+};
diff --git a/drivers/of/unittest-data/overlay_20.dtso b/drivers/of/unittest-data/overlay_20.dtso
new file mode 100644
index 000000000..d4a4f2f32
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_20.dtso
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/* overlay_20 - notify test */
+
+&unittest_test_bus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	test-unittest20 {
+		compatible = "unittest";
+		reg = <20>;
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_3.dtso b/drivers/of/unittest-data/overlay_3.dtso
new file mode 100644
index 000000000..40f289e7c
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_3.dtso
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/* overlay_3 - disable using label */
+
+&unittest3 {
+	status = "disabled";
+};
diff --git a/drivers/of/unittest-data/overlay_4.dtso b/drivers/of/unittest-data/overlay_4.dtso
new file mode 100644
index 000000000..a8a77ddf9
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_4.dtso
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/* overlay_4 - test insertion of a full node */
+
+&unittest_test_bus {
+
+	/* suppress DTC warning */
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	test-unittest4 {
+		compatible = "unittest";
+		status = "okay";
+		reg = <4>;
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_5.dtso b/drivers/of/unittest-data/overlay_5.dtso
new file mode 100644
index 000000000..706f5f1b7
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_5.dtso
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/* overlay_5 - test overlay apply revert */
+
+&unittest5 {
+	status = "okay";
+};
diff --git a/drivers/of/unittest-data/overlay_6.dtso b/drivers/of/unittest-data/overlay_6.dtso
new file mode 100644
index 000000000..21a7fa4ca
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_6.dtso
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/* overlay_6 */
+/* overlays 6, 7 application and removal in sequence */
+
+&unittest6 {
+	status = "okay";
+};
diff --git a/drivers/of/unittest-data/overlay_7.dtso b/drivers/of/unittest-data/overlay_7.dtso
new file mode 100644
index 000000000..58ba1bb51
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_7.dtso
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/* overlay_7 */
+/* overlays 6, 7 application and removal in sequence */
+
+&unittest7 {
+	status = "okay";
+};
diff --git a/drivers/of/unittest-data/overlay_8.dtso b/drivers/of/unittest-data/overlay_8.dtso
new file mode 100644
index 000000000..e9718d118
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_8.dtso
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/* overlay_8 */
+/* overlays 8, 9, 10, 11 application and removal in bad sequence */
+
+&unittest8 {
+	status = "okay";
+};
diff --git a/drivers/of/unittest-data/overlay_9.dtso b/drivers/of/unittest-data/overlay_9.dtso
new file mode 100644
index 000000000..b35e23eda
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_9.dtso
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/* overlay_9 */
+/* overlays 8, 9, 10, 11 application and removal in bad sequence */
+
+&unittest8 {
+	property-foo = "bar";
+};
diff --git a/drivers/of/unittest-data/overlay_bad_add_dup_node.dtso b/drivers/of/unittest-data/overlay_bad_add_dup_node.dtso
new file mode 100644
index 000000000..145dfc3b1
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_bad_add_dup_node.dtso
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/*
+ * &electric_1/motor-1 and &spin_ctrl_1 are the same node:
+ *   /testcase-data-2/substation@100/motor-1
+ *
+ * Thus the new node "controller" in each fragment will
+ * result in an attempt to add the same node twice.
+ * This will result in an error and the overlay apply
+ * will fail.
+ */
+
+&electric_1 {
+
+	motor-1 {
+		controller {
+			power_bus = < 0x1 0x2 >;
+		};
+	};
+};
+
+&spin_ctrl_1 {
+		controller {
+			power_bus_emergency = < 0x101 0x102 >;
+		};
+};
diff --git a/drivers/of/unittest-data/overlay_bad_add_dup_prop.dtso b/drivers/of/unittest-data/overlay_bad_add_dup_prop.dtso
new file mode 100644
index 000000000..6327d1ffb
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_bad_add_dup_prop.dtso
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/*
+ * &electric_1/motor-1/electric and &spin_ctrl_1/electric are the same node:
+ *   /testcase-data-2/substation@100/motor-1/electric
+ *
+ * Thus the property "rpm_avail" in each fragment will
+ * result in an attempt to update the same property twice.
+ * This will result in an error and the overlay apply
+ * will fail.
+ *
+ * The previous version of this test did not include the extra
+ * level of node 'electric'.  That resulted in the 'rpm_avail'
+ * property being located in the pre-existing node 'motor-1'.
+ * Modifying a property results in a WARNING that a memory leak
+ * will occur if the overlay is removed.  Since the overlay apply
+ * fails, the memory leak does actually occur, and kmemleak will
+ * further report the memory leak if CONFIG_DEBUG_KMEMLEAK is
+ * enabled.  Adding the overlay node 'electric' avoids the
+ * memory leak and thus people who use kmemleak will not
+ * have to debug this non-problem again.
+ */
+
+&electric_1 {
+
+	motor-1 {
+		electric {
+			rpm_avail = < 100 >;
+		};
+	};
+};
+
+&spin_ctrl_1 {
+		electric {
+			rpm_avail = < 100 200 >;
+		};
+};
diff --git a/drivers/of/unittest-data/overlay_bad_phandle.dtso b/drivers/of/unittest-data/overlay_bad_phandle.dtso
new file mode 100644
index 000000000..83b797360
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_bad_phandle.dtso
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+&electric_1 {
+
+	// This label should cause an error when the overlay
+	// is applied.  There is already a phandle value
+	// in the base tree for motor-1.
+	spin_ctrl_1_conflict: motor-1 {
+		accelerate = < 3 >;
+		decelerate = < 5 >;
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_bad_symbol.dtso b/drivers/of/unittest-data/overlay_bad_symbol.dtso
new file mode 100644
index 000000000..98c6d1de1
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_bad_symbol.dtso
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+&electric_1 {
+
+	// This label should cause an error when the overlay
+	// is applied.  There is already a symbol hvac_1
+	// in the base tree
+	hvac_1: hvac-medium-2 {
+		compatible = "ot,hvac-medium";
+		heat-range = < 50 75 >;
+		cool-range = < 60 80 >;
+	};
+
+};
diff --git a/drivers/of/unittest-data/overlay_base.dtso b/drivers/of/unittest-data/overlay_base.dtso
new file mode 100644
index 000000000..ab9014589
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_base.dtso
@@ -0,0 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+#include "overlay_common.dtsi"
diff --git a/drivers/of/unittest-data/overlay_common.dtsi b/drivers/of/unittest-data/overlay_common.dtsi
new file mode 100644
index 000000000..08874a725
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_common.dtsi
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Base device tree that overlays will be applied against.
+ *
+ * Do not add any properties in node "/".
+ * Do not add any nodes other than "/testcase-data-2" in node "/".
+ * Do not add anything that would result in dtc creating node "/__fixups__".
+ * dtc will create nodes "/__symbols__" and "/__local_fixups__".
+ */
+
+/ {
+	testcase-data-2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		electric_1: substation@100 {
+			compatible = "ot,big-volts-control";
+			reg = < 0x00000100 0x100 >;
+			status = "disabled";
+
+			hvac_1: hvac-medium-1 {
+				compatible = "ot,hvac-medium";
+				heat-range = < 50 75 >;
+				cool-range = < 60 80 >;
+			};
+
+			spin_ctrl_1: motor-1 {
+				compatible = "ot,ferris-wheel-motor";
+				spin = "clockwise";
+				rpm_avail = < 50 >;
+			};
+
+			spin_ctrl_2: motor-8 {
+				compatible = "ot,roller-coaster-motor";
+			};
+		};
+
+		rides_1: fairway-1 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "ot,rides";
+			status = "disabled";
+			orientation = < 127 >;
+
+			ride@100 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "ot,roller-coaster";
+				reg = < 0x00000100 0x100 >;
+				hvac-provider = < &hvac_1 >;
+				hvac-thermostat = < 29 > ;
+				hvac-zones = < 14 >;
+				hvac-zone-names = "operator";
+				spin-controller = < &spin_ctrl_2 5 &spin_ctrl_2 7 >;
+				spin-controller-names = "track_1", "track_2";
+				queues = < 2 >;
+
+				track@30 {
+					reg = < 0x00000030 0x10 >;
+				};
+
+				track@40 {
+					reg = < 0x00000040 0x10 >;
+				};
+
+			};
+		};
+
+		lights_1: lights@30000 {
+			compatible = "ot,work-lights";
+			reg = < 0x00030000 0x1000 >;
+			status = "disabled";
+		};
+
+		lights_2: lights@40000 {
+			compatible = "ot,show-lights";
+			reg = < 0x00040000 0x1000 >;
+			status = "disabled";
+			rate = < 13 138 >;
+		};
+
+		retail_1: vending@50000 {
+			reg = < 0x00050000 0x1000 >;
+			compatible = "ot,tickets";
+			status = "disabled";
+		};
+
+	};
+};
+
diff --git a/drivers/of/unittest-data/overlay_gpio_01.dtso b/drivers/of/unittest-data/overlay_gpio_01.dtso
new file mode 100644
index 000000000..699ff104a
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_gpio_01.dtso
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+&unittest_test_bus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	gpio@0 {
+		compatible = "unittest-gpio";
+		reg = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <2>;
+		gpio-line-names = "line-A", "line-B";
+
+		line-b {
+			gpio-hog;
+			gpios = <2 0>;
+			input;
+			line-name = "line-B-input";
+		};
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_gpio_02a.dtso b/drivers/of/unittest-data/overlay_gpio_02a.dtso
new file mode 100644
index 000000000..ec59aff6e
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_gpio_02a.dtso
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+&unittest_test_bus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	gpio@2 {
+		compatible = "unittest-gpio";
+		reg = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <2>;
+		gpio-line-names = "line-A", "line-B";
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_gpio_02b.dtso b/drivers/of/unittest-data/overlay_gpio_02b.dtso
new file mode 100644
index 000000000..43ce111d4
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_gpio_02b.dtso
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+&unittest_test_bus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	gpio@2 {
+		line-a {
+			gpio-hog;
+			gpios = <1 0>;
+			input;
+			line-name = "line-A-input";
+		};
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_gpio_03.dtso b/drivers/of/unittest-data/overlay_gpio_03.dtso
new file mode 100644
index 000000000..6e0312340
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_gpio_03.dtso
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+&unittest_test_bus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	gpio@3 {
+		compatible = "unittest-gpio";
+		reg = <3>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <2>;
+		gpio-line-names = "line-A", "line-B", "line-C", "line-D";
+
+		line-d {
+			gpio-hog;
+			gpios = <4 0>;
+			input;
+			line-name = "line-D-input";
+		};
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_gpio_04a.dtso b/drivers/of/unittest-data/overlay_gpio_04a.dtso
new file mode 100644
index 000000000..7b1e04ebf
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_gpio_04a.dtso
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+&unittest_test_bus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	gpio@4 {
+		compatible = "unittest-gpio";
+		reg = <4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <2>;
+		gpio-line-names = "line-A", "line-B", "line-C", "line-D";
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_gpio_04b.dtso b/drivers/of/unittest-data/overlay_gpio_04b.dtso
new file mode 100644
index 000000000..a14e95c66
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_gpio_04b.dtso
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+&unittest_test_bus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	gpio@4 {
+		line-c {
+			gpio-hog;
+			gpios = <3 0>;
+			input;
+			line-name = "line-C-input";
+		};
+	};
+};
diff --git a/drivers/of/unittest-data/static_base_1.dts b/drivers/of/unittest-data/static_base_1.dts
new file mode 100644
index 000000000..10556cb3f
--- /dev/null
+++ b/drivers/of/unittest-data/static_base_1.dts
@@ -0,0 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "testcases_common.dtsi"
diff --git a/drivers/of/unittest-data/static_base_2.dts b/drivers/of/unittest-data/static_base_2.dts
new file mode 100644
index 000000000..b0ea9504d
--- /dev/null
+++ b/drivers/of/unittest-data/static_base_2.dts
@@ -0,0 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "overlay_common.dtsi"
diff --git a/drivers/of/unittest-data/testcases.dtso b/drivers/of/unittest-data/testcases.dtso
new file mode 100644
index 000000000..61cdd3d5f
--- /dev/null
+++ b/drivers/of/unittest-data/testcases.dtso
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+#include "testcases_common.dtsi"
+
+/ {
+	/*
+	 * testcase data that intentionally results in an error is located here
+	 * instead of in testcases_common.dtsi so that the static overlay apply
+	 * tests will not include the error.
+	 */
+	testcase-data {
+		testcase-device2 {
+			compatible = "testcase-device";
+			interrupt-parent = <&test_intc2>;
+			interrupts = <1>; /* invalid specifier - too short */
+		};
+	};
+
+};
diff --git a/drivers/of/unittest-data/testcases_common.dtsi b/drivers/of/unittest-data/testcases_common.dtsi
new file mode 100644
index 000000000..19292bbb4
--- /dev/null
+++ b/drivers/of/unittest-data/testcases_common.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	testcase-data {
+		changeset {
+			prop-update = "hello";
+			prop-remove = "world";
+			node-remove {
+			};
+		};
+	};
+};
+
+#include "tests-phandle.dtsi"
+#include "tests-interrupts.dtsi"
+#include "tests-match.dtsi"
+#include "tests-address.dtsi"
+#include "tests-platform.dtsi"
+#include "tests-overlay.dtsi"
diff --git a/drivers/of/unittest-data/tests-address.dtsi b/drivers/of/unittest-data/tests-address.dtsi
new file mode 100644
index 000000000..6604a52bf
--- /dev/null
+++ b/drivers/of/unittest-data/tests-address.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	testcase-data {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		address-tests {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* ranges here is to make sure we don't use it for
+			 * dma-ranges translation */
+			ranges = <0x70000000 0x70000000 0x40000000>,
+				 <0x00000000 0xd0000000 0x20000000>;
+			dma-ranges = <0x0 0x20000000 0x40000000>;
+
+			device@70000000 {
+				reg = <0x70000000 0x1000>;
+			};
+
+			bus@80000000 {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x80000000 0x0 0x100000>;
+				dma-ranges = <0x1 0x0 0x0 0x20 0x0>;
+
+				device@1000 {
+					reg = <0x0 0x1000 0x0 0x1000>;
+				};
+			};
+
+			pci@90000000 {
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				reg = <0x90000000 0x1000>;
+				ranges = <0x42000000 0x0 0x40000000 0x40000000 0x0 0x10000000>;
+				dma-ranges = <0x42000000 0x0 0x80000000 0x00000000 0x0 0x10000000>,
+					     <0x42000000 0x0 0xc0000000 0x20000000 0x0 0x10000000>;
+			};
+
+		};
+	};
+};
diff --git a/drivers/of/unittest-data/tests-interrupts.dtsi b/drivers/of/unittest-data/tests-interrupts.dtsi
new file mode 100644
index 000000000..ecc74dbcc
--- /dev/null
+++ b/drivers/of/unittest-data/tests-interrupts.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	testcase-data {
+		interrupts {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			test_intc0: intc0 {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			test_intc1: intc1 {
+				interrupt-controller;
+				#interrupt-cells = <3>;
+			};
+
+			test_intc2: intc2 {
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			test_intmap0: intmap0 {
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				interrupt-map = <1 &test_intc0 9>,
+						<2 &test_intc1 10 11 12>,
+						<3 &test_intc2 13 14>,
+						<4 &test_intc2 15 16>;
+			};
+
+			test_intmap1: intmap1 {
+				#interrupt-cells = <2>;
+				/*
+				 * #address-cells is required
+				 *
+				 * The property is not provided in this node to
+				 * test that the code will properly handle
+				 * this case for legacy .dts files.
+				 *
+				 * Not having #address-cells will result in a
+				 * warning from dtc starting with
+				 * version v1.6.1-19-g0a3a9d3449c8
+				 * The warning is suppressed by adding
+				 * -Wno-interrupt_map to the Makefile for all
+				 * .dts files this include this .dtsi
+				#address-cells = <1>;
+				 */
+				interrupt-map = <0x5000 1 2 &test_intc0 15>;
+			};
+
+			interrupts0 {
+				interrupt-parent = <&test_intc0>;
+				interrupts = <1>, <2>, <3>, <4>;
+			};
+
+			interrupts1 {
+				interrupt-parent = <&test_intmap0>;
+				interrupts = <1>, <2>, <3>, <4>;
+			};
+
+			interrupts-extended0 {
+				reg = <0x5000 0x100>;
+				/*
+				 * Do not remove &test_intmap1 from this
+				 * property - see comment in node intmap1
+				 */
+				interrupts-extended = <&test_intc0 1>,
+						      <&test_intc1 2 3 4>,
+						      <&test_intc2 5 6>,
+						      <&test_intmap0 1>,
+						      <&test_intmap0 2>,
+						      <&test_intmap0 3>,
+						      <&test_intmap1 1 2>;
+			};
+		};
+
+		testcase-device1 {
+			compatible = "testcase-device";
+			interrupt-parent = <&test_intc0>;
+			interrupts = <1>;
+		};
+
+		/*
+		 * testcase data that intentionally results in an error is
+		 * located in testcases.dts instead of in this file so that the
+		 * static overlay apply tests will not include the error.
+		 */
+	};
+};
diff --git a/drivers/of/unittest-data/tests-match.dtsi b/drivers/of/unittest-data/tests-match.dtsi
new file mode 100644
index 000000000..1fd3b2131
--- /dev/null
+++ b/drivers/of/unittest-data/tests-match.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	testcase-data {
+		match-node {
+			name0 { };
+			name1 { device_type = "type1"; };
+			a { name2 { device_type = "type1"; }; };
+			b { name2 { }; };
+			c { name2 { device_type = "type2"; }; };
+			name3 { compatible = "compat3"; };
+			name4 { compatible = "compat2", "compat3"; };
+			name5 { compatible = "compat2", "compat3"; };
+			name6 { compatible = "compat1", "compat2", "compat3"; };
+			name7 { compatible = "compat2"; device_type = "type1"; };
+			name8 { compatible = "compat2"; device_type = "type1"; };
+			name9 { compatible = "compat2"; };
+		};
+	};
+};
diff --git a/drivers/of/unittest-data/tests-overlay.dtsi b/drivers/of/unittest-data/tests-overlay.dtsi
new file mode 100644
index 000000000..4ea024d90
--- /dev/null
+++ b/drivers/of/unittest-data/tests-overlay.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	testcase-data {
+		overlay-node {
+
+			/* test bus */
+			unittest_test_bus: test-bus {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				unittest100: test-unittest100 {
+					compatible = "unittest";
+					status = "okay";
+					reg = <100>;
+				};
+
+				unittest101: test-unittest101 {
+					compatible = "unittest";
+					status = "disabled";
+					reg = <101>;
+				};
+
+				unittest0: test-unittest0 {
+					compatible = "unittest";
+					status = "disabled";
+					reg = <0>;
+				};
+
+				unittest1: test-unittest1 {
+					compatible = "unittest";
+					status = "okay";
+					reg = <1>;
+				};
+
+				unittest2: test-unittest2 {
+					compatible = "unittest";
+					status = "disabled";
+					reg = <2>;
+				};
+
+				unittest3: test-unittest3 {
+					compatible = "unittest";
+					status = "okay";
+					reg = <3>;
+				};
+
+				unittest5: test-unittest5 {
+					compatible = "unittest";
+					status = "disabled";
+					reg = <5>;
+				};
+
+				unittest6: test-unittest6 {
+					compatible = "unittest";
+					status = "disabled";
+					reg = <6>;
+				};
+
+				unittest7: test-unittest7 {
+					compatible = "unittest";
+					status = "disabled";
+					reg = <7>;
+				};
+
+				unittest8: test-unittest8 {
+					compatible = "unittest";
+					status = "disabled";
+					reg = <8>;
+				};
+
+				unittest_i2c_test_bus: i2c-test-bus {
+					compatible = "unittest-i2c-bus";
+					status = "okay";
+					reg = <50>;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					test-unittest12 {
+						reg = <8>;
+						compatible = "unittest-i2c-dev";
+						status = "disabled";
+					};
+
+					test-unittest13 {
+						reg = <9>;
+						compatible = "unittest-i2c-dev";
+						status = "okay";
+					};
+
+					test-unittest14 {
+						reg = <10>;
+						compatible = "unittest-i2c-mux";
+						status = "okay";
+
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						i2c@0 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <0>;
+
+							test-mux-dev@20 {
+								reg = <0x20>;
+								compatible = "unittest-i2c-dev";
+								status = "okay";
+							};
+						};
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/drivers/of/unittest-data/tests-phandle.dtsi b/drivers/of/unittest-data/tests-phandle.dtsi
new file mode 100644
index 000000000..6b33be4c4
--- /dev/null
+++ b/drivers/of/unittest-data/tests-phandle.dtsi
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	aliases {
+		testcase-alias = &testcase;
+	};
+
+	testcase: testcase-data {
+		security-password = "password";
+		duplicate-name = "duplicate";
+		duplicate-name { };
+		phandle-tests {
+			provider0: provider0 {
+				#phandle-cells = <0>;
+			};
+
+			provider1: provider1 {
+				#phandle-cells = <1>;
+			};
+
+			provider2: provider2 {
+				#phandle-cells = <2>;
+			};
+
+			provider3: provider3 {
+				#phandle-cells = <3>;
+			};
+
+			provider4: provider4 {
+				#phandle-cells = <2>;
+				phandle-map = <0 1 &provider1 3>,
+					      <4 0 &provider0>,
+					      <16 5 &provider3 3 5 0>,
+					      <200 8 &provider2 23 6>,
+					      <19 0 &provider2 15 0>,
+					      <2 3 &provider3 2 5 3>;
+				phandle-map-mask = <0xff 0xf>;
+				phandle-map-pass-thru = <0x0 0xf0>;
+			};
+
+			consumer-a {
+				phandle-list =	<&provider1 1>,
+						<&provider2 2 0>,
+						<0>,
+						<&provider3 4 4 3>,
+						<&provider2 5 100>,
+						<&provider0>,
+						<&provider1 7>;
+				phandle-list-names = "first", "second", "third";
+
+				phandle-list-bad-phandle = <12345678 0 0>;
+				phandle-list-bad-args = <&provider2 1 0>,
+							<&provider3 0>;
+				empty-property;
+				string-property = "foobar";
+				unterminated-string = [40 41 42 43];
+				unterminated-string-list = "first", "second", [40 41 42 43];
+			};
+
+			consumer-b {
+				phandle-list =	<&provider1 1>,
+						<&provider4 2 3>,
+						<0>,
+						<&provider4 4 0x100>,
+						<&provider4 0 0x61>,
+						<&provider0>,
+						<&provider4 19 0x20>;
+				phandle-list-bad-phandle = <12345678 0 0>;
+				phandle-list-bad-args = <&provider2 1 0>,
+							<&provider4 0>;
+			};
+		};
+	};
+};
diff --git a/drivers/of/unittest-data/tests-platform.dtsi b/drivers/of/unittest-data/tests-platform.dtsi
new file mode 100644
index 000000000..fa3961107
--- /dev/null
+++ b/drivers/of/unittest-data/tests-platform.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	testcase-data {
+		platform-tests {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			test-device@0 {
+				compatible = "test-device";
+				reg = <0x0>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dev@100 {
+					compatible = "test-sub-device";
+					reg = <0x100>;
+				};
+			};
+
+			test-device@1 {
+				compatible = "test-device";
+				reg = <0x1>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dev@100 {
+					compatible = "test-sub-device",
+						     "test-compat2",
+						     "test-compat3";
+					reg = <0x100>;
+				};
+			};
+		};
+	};
+};