Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 864 insertions, 0 deletions

diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c
new file mode 100644
index 000000000..2542196e8
--- /dev/null
+++ b/drivers/pci/endpoint/pci-epc-core.c
@@ -0,0 +1,864 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCI Endpoint *Controller* (EPC) library
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ */
+
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+
+#include <linux/pci-epc.h>
+#include <linux/pci-epf.h>
+#include <linux/pci-ep-cfs.h>
+
+static struct class *pci_epc_class;
+
+static void devm_pci_epc_release(struct device *dev, void *res)
+{
+	struct pci_epc *epc = *(struct pci_epc **)res;
+
+	pci_epc_destroy(epc);
+}
+
+static int devm_pci_epc_match(struct device *dev, void *res, void *match_data)
+{
+	struct pci_epc **epc = res;
+
+	return *epc == match_data;
+}
+
+/**
+ * pci_epc_put() - release the PCI endpoint controller
+ * @epc: epc returned by pci_epc_get()
+ *
+ * release the refcount the caller obtained by invoking pci_epc_get()
+ */
+void pci_epc_put(struct pci_epc *epc)
+{
+	if (!epc || IS_ERR(epc))
+		return;
+
+	module_put(epc->ops->owner);
+	put_device(&epc->dev);
+}
+EXPORT_SYMBOL_GPL(pci_epc_put);
+
+/**
+ * pci_epc_get() - get the PCI endpoint controller
+ * @epc_name: device name of the endpoint controller
+ *
+ * Invoke to get struct pci_epc * corresponding to the device name of the
+ * endpoint controller
+ */
+struct pci_epc *pci_epc_get(const char *epc_name)
+{
+	int ret = -EINVAL;
+	struct pci_epc *epc;
+	struct device *dev;
+	struct class_dev_iter iter;
+
+	class_dev_iter_init(&iter, pci_epc_class, NULL, NULL);
+	while ((dev = class_dev_iter_next(&iter))) {
+		if (strcmp(epc_name, dev_name(dev)))
+			continue;
+
+		epc = to_pci_epc(dev);
+		if (!try_module_get(epc->ops->owner)) {
+			ret = -EINVAL;
+			goto err;
+		}
+
+		class_dev_iter_exit(&iter);
+		get_device(&epc->dev);
+		return epc;
+	}
+
+err:
+	class_dev_iter_exit(&iter);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(pci_epc_get);
+
+/**
+ * pci_epc_get_first_free_bar() - helper to get first unreserved BAR
+ * @epc_features: pci_epc_features structure that holds the reserved bar bitmap
+ *
+ * Invoke to get the first unreserved BAR that can be used by the endpoint
+ * function. For any incorrect value in reserved_bar return '0'.
+ */
+enum pci_barno
+pci_epc_get_first_free_bar(const struct pci_epc_features *epc_features)
+{
+	return pci_epc_get_next_free_bar(epc_features, BAR_0);
+}
+EXPORT_SYMBOL_GPL(pci_epc_get_first_free_bar);
+
+/**
+ * pci_epc_get_next_free_bar() - helper to get unreserved BAR starting from @bar
+ * @epc_features: pci_epc_features structure that holds the reserved bar bitmap
+ * @bar: the starting BAR number from where unreserved BAR should be searched
+ *
+ * Invoke to get the next unreserved BAR starting from @bar that can be used
+ * for endpoint function. For any incorrect value in reserved_bar return '0'.
+ */
+enum pci_barno pci_epc_get_next_free_bar(const struct pci_epc_features
+					 *epc_features, enum pci_barno bar)
+{
+	unsigned long free_bar;
+
+	if (!epc_features)
+		return BAR_0;
+
+	/* If 'bar - 1' is a 64-bit BAR, move to the next BAR */
+	if ((epc_features->bar_fixed_64bit << 1) & 1 << bar)
+		bar++;
+
+	/* Find if the reserved BAR is also a 64-bit BAR */
+	free_bar = epc_features->reserved_bar & epc_features->bar_fixed_64bit;
+
+	/* Set the adjacent bit if the reserved BAR is also a 64-bit BAR */
+	free_bar <<= 1;
+	free_bar |= epc_features->reserved_bar;
+
+	free_bar = find_next_zero_bit(&free_bar, 6, bar);
+	if (free_bar > 5)
+		return NO_BAR;
+
+	return free_bar;
+}
+EXPORT_SYMBOL_GPL(pci_epc_get_next_free_bar);
+
+/**
+ * pci_epc_get_features() - get the features supported by EPC
+ * @epc: the features supported by *this* EPC device will be returned
+ * @func_no: the features supported by the EPC device specific to the
+ *	     endpoint function with func_no will be returned
+ * @vfunc_no: the features supported by the EPC device specific to the
+ *	     virtual endpoint function with vfunc_no will be returned
+ *
+ * Invoke to get the features provided by the EPC which may be
+ * specific to an endpoint function. Returns pci_epc_features on success
+ * and NULL for any failures.
+ */
+const struct pci_epc_features *pci_epc_get_features(struct pci_epc *epc,
+						    u8 func_no, u8 vfunc_no)
+{
+	const struct pci_epc_features *epc_features;
+
+	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
+		return NULL;
+
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return NULL;
+
+	if (!epc->ops->get_features)
+		return NULL;
+
+	mutex_lock(&epc->lock);
+	epc_features = epc->ops->get_features(epc, func_no, vfunc_no);
+	mutex_unlock(&epc->lock);
+
+	return epc_features;
+}
+EXPORT_SYMBOL_GPL(pci_epc_get_features);
+
+/**
+ * pci_epc_stop() - stop the PCI link
+ * @epc: the link of the EPC device that has to be stopped
+ *
+ * Invoke to stop the PCI link
+ */
+void pci_epc_stop(struct pci_epc *epc)
+{
+	if (IS_ERR(epc) || !epc->ops->stop)
+		return;
+
+	mutex_lock(&epc->lock);
+	epc->ops->stop(epc);
+	mutex_unlock(&epc->lock);
+}
+EXPORT_SYMBOL_GPL(pci_epc_stop);
+
+/**
+ * pci_epc_start() - start the PCI link
+ * @epc: the link of *this* EPC device has to be started
+ *
+ * Invoke to start the PCI link
+ */
+int pci_epc_start(struct pci_epc *epc)
+{
+	int ret;
+
+	if (IS_ERR(epc))
+		return -EINVAL;
+
+	if (!epc->ops->start)
+		return 0;
+
+	mutex_lock(&epc->lock);
+	ret = epc->ops->start(epc);
+	mutex_unlock(&epc->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_start);
+
+/**
+ * pci_epc_raise_irq() - interrupt the host system
+ * @epc: the EPC device which has to interrupt the host
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
+ * @type: specify the type of interrupt; legacy, MSI or MSI-X
+ * @interrupt_num: the MSI or MSI-X interrupt number
+ *
+ * Invoke to raise an legacy, MSI or MSI-X interrupt
+ */
+int pci_epc_raise_irq(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
+		      enum pci_epc_irq_type type, u16 interrupt_num)
+{
+	int ret;
+
+	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
+		return -EINVAL;
+
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return -EINVAL;
+
+	if (!epc->ops->raise_irq)
+		return 0;
+
+	mutex_lock(&epc->lock);
+	ret = epc->ops->raise_irq(epc, func_no, vfunc_no, type, interrupt_num);
+	mutex_unlock(&epc->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_raise_irq);
+
+/**
+ * pci_epc_map_msi_irq() - Map physical address to MSI address and return
+ *                         MSI data
+ * @epc: the EPC device which has the MSI capability
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
+ * @phys_addr: the physical address of the outbound region
+ * @interrupt_num: the MSI interrupt number
+ * @entry_size: Size of Outbound address region for each interrupt
+ * @msi_data: the data that should be written in order to raise MSI interrupt
+ *            with interrupt number as 'interrupt num'
+ * @msi_addr_offset: Offset of MSI address from the aligned outbound address
+ *                   to which the MSI address is mapped
+ *
+ * Invoke to map physical address to MSI address and return MSI data. The
+ * physical address should be an address in the outbound region. This is
+ * required to implement doorbell functionality of NTB wherein EPC on either
+ * side of the interface (primary and secondary) can directly write to the
+ * physical address (in outbound region) of the other interface to ring
+ * doorbell.
+ */
+int pci_epc_map_msi_irq(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
+			phys_addr_t phys_addr, u8 interrupt_num, u32 entry_size,
+			u32 *msi_data, u32 *msi_addr_offset)
+{
+	int ret;
+
+	if (IS_ERR_OR_NULL(epc))
+		return -EINVAL;
+
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return -EINVAL;
+
+	if (!epc->ops->map_msi_irq)
+		return -EINVAL;
+
+	mutex_lock(&epc->lock);
+	ret = epc->ops->map_msi_irq(epc, func_no, vfunc_no, phys_addr,
+				    interrupt_num, entry_size, msi_data,
+				    msi_addr_offset);
+	mutex_unlock(&epc->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_map_msi_irq);
+
+/**
+ * pci_epc_get_msi() - get the number of MSI interrupt numbers allocated
+ * @epc: the EPC device to which MSI interrupts was requested
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
+ *
+ * Invoke to get the number of MSI interrupts allocated by the RC
+ */
+int pci_epc_get_msi(struct pci_epc *epc, u8 func_no, u8 vfunc_no)
+{
+	int interrupt;
+
+	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
+		return 0;
+
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return 0;
+
+	if (!epc->ops->get_msi)
+		return 0;
+
+	mutex_lock(&epc->lock);
+	interrupt = epc->ops->get_msi(epc, func_no, vfunc_no);
+	mutex_unlock(&epc->lock);
+
+	if (interrupt < 0)
+		return 0;
+
+	interrupt = 1 << interrupt;
+
+	return interrupt;
+}
+EXPORT_SYMBOL_GPL(pci_epc_get_msi);
+
+/**
+ * pci_epc_set_msi() - set the number of MSI interrupt numbers required
+ * @epc: the EPC device on which MSI has to be configured
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
+ * @interrupts: number of MSI interrupts required by the EPF
+ *
+ * Invoke to set the required number of MSI interrupts.
+ */
+int pci_epc_set_msi(struct pci_epc *epc, u8 func_no, u8 vfunc_no, u8 interrupts)
+{
+	int ret;
+	u8 encode_int;
+
+	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions ||
+	    interrupts < 1 || interrupts > 32)
+		return -EINVAL;
+
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return -EINVAL;
+
+	if (!epc->ops->set_msi)
+		return 0;
+
+	encode_int = order_base_2(interrupts);
+
+	mutex_lock(&epc->lock);
+	ret = epc->ops->set_msi(epc, func_no, vfunc_no, encode_int);
+	mutex_unlock(&epc->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_set_msi);
+
+/**
+ * pci_epc_get_msix() - get the number of MSI-X interrupt numbers allocated
+ * @epc: the EPC device to which MSI-X interrupts was requested
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
+ *
+ * Invoke to get the number of MSI-X interrupts allocated by the RC
+ */
+int pci_epc_get_msix(struct pci_epc *epc, u8 func_no, u8 vfunc_no)
+{
+	int interrupt;
+
+	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
+		return 0;
+
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return 0;
+
+	if (!epc->ops->get_msix)
+		return 0;
+
+	mutex_lock(&epc->lock);
+	interrupt = epc->ops->get_msix(epc, func_no, vfunc_no);
+	mutex_unlock(&epc->lock);
+
+	if (interrupt < 0)
+		return 0;
+
+	return interrupt + 1;
+}
+EXPORT_SYMBOL_GPL(pci_epc_get_msix);
+
+/**
+ * pci_epc_set_msix() - set the number of MSI-X interrupt numbers required
+ * @epc: the EPC device on which MSI-X has to be configured
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
+ * @interrupts: number of MSI-X interrupts required by the EPF
+ * @bir: BAR where the MSI-X table resides
+ * @offset: Offset pointing to the start of MSI-X table
+ *
+ * Invoke to set the required number of MSI-X interrupts.
+ */
+int pci_epc_set_msix(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
+		     u16 interrupts, enum pci_barno bir, u32 offset)
+{
+	int ret;
+
+	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions ||
+	    interrupts < 1 || interrupts > 2048)
+		return -EINVAL;
+
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return -EINVAL;
+
+	if (!epc->ops->set_msix)
+		return 0;
+
+	mutex_lock(&epc->lock);
+	ret = epc->ops->set_msix(epc, func_no, vfunc_no, interrupts - 1, bir,
+				 offset);
+	mutex_unlock(&epc->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_set_msix);
+
+/**
+ * pci_epc_unmap_addr() - unmap CPU address from PCI address
+ * @epc: the EPC device on which address is allocated
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
+ * @phys_addr: physical address of the local system
+ *
+ * Invoke to unmap the CPU address from PCI address.
+ */
+void pci_epc_unmap_addr(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
+			phys_addr_t phys_addr)
+{
+	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
+		return;
+
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return;
+
+	if (!epc->ops->unmap_addr)
+		return;
+
+	mutex_lock(&epc->lock);
+	epc->ops->unmap_addr(epc, func_no, vfunc_no, phys_addr);
+	mutex_unlock(&epc->lock);
+}
+EXPORT_SYMBOL_GPL(pci_epc_unmap_addr);
+
+/**
+ * pci_epc_map_addr() - map CPU address to PCI address
+ * @epc: the EPC device on which address is allocated
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
+ * @phys_addr: physical address of the local system
+ * @pci_addr: PCI address to which the physical address should be mapped
+ * @size: the size of the allocation
+ *
+ * Invoke to map CPU address with PCI address.
+ */
+int pci_epc_map_addr(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
+		     phys_addr_t phys_addr, u64 pci_addr, size_t size)
+{
+	int ret;
+
+	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
+		return -EINVAL;
+
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return -EINVAL;
+
+	if (!epc->ops->map_addr)
+		return 0;
+
+	mutex_lock(&epc->lock);
+	ret = epc->ops->map_addr(epc, func_no, vfunc_no, phys_addr, pci_addr,
+				 size);
+	mutex_unlock(&epc->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_map_addr);
+
+/**
+ * pci_epc_clear_bar() - reset the BAR
+ * @epc: the EPC device for which the BAR has to be cleared
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
+ * @epf_bar: the struct epf_bar that contains the BAR information
+ *
+ * Invoke to reset the BAR of the endpoint device.
+ */
+void pci_epc_clear_bar(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
+		       struct pci_epf_bar *epf_bar)
+{
+	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions ||
+	    (epf_bar->barno == BAR_5 &&
+	     epf_bar->flags & PCI_BASE_ADDRESS_MEM_TYPE_64))
+		return;
+
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return;
+
+	if (!epc->ops->clear_bar)
+		return;
+
+	mutex_lock(&epc->lock);
+	epc->ops->clear_bar(epc, func_no, vfunc_no, epf_bar);
+	mutex_unlock(&epc->lock);
+}
+EXPORT_SYMBOL_GPL(pci_epc_clear_bar);
+
+/**
+ * pci_epc_set_bar() - configure BAR in order for host to assign PCI addr space
+ * @epc: the EPC device on which BAR has to be configured
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
+ * @epf_bar: the struct epf_bar that contains the BAR information
+ *
+ * Invoke to configure the BAR of the endpoint device.
+ */
+int pci_epc_set_bar(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
+		    struct pci_epf_bar *epf_bar)
+{
+	int ret;
+	int flags = epf_bar->flags;
+
+	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions ||
+	    (epf_bar->barno == BAR_5 &&
+	     flags & PCI_BASE_ADDRESS_MEM_TYPE_64) ||
+	    (flags & PCI_BASE_ADDRESS_SPACE_IO &&
+	     flags & PCI_BASE_ADDRESS_IO_MASK) ||
+	    (upper_32_bits(epf_bar->size) &&
+	     !(flags & PCI_BASE_ADDRESS_MEM_TYPE_64)))
+		return -EINVAL;
+
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return -EINVAL;
+
+	if (!epc->ops->set_bar)
+		return 0;
+
+	mutex_lock(&epc->lock);
+	ret = epc->ops->set_bar(epc, func_no, vfunc_no, epf_bar);
+	mutex_unlock(&epc->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_set_bar);
+
+/**
+ * pci_epc_write_header() - write standard configuration header
+ * @epc: the EPC device to which the configuration header should be written
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
+ * @header: standard configuration header fields
+ *
+ * Invoke to write the configuration header to the endpoint controller. Every
+ * endpoint controller will have a dedicated location to which the standard
+ * configuration header would be written. The callback function should write
+ * the header fields to this dedicated location.
+ */
+int pci_epc_write_header(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
+			 struct pci_epf_header *header)
+{
+	int ret;
+
+	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
+		return -EINVAL;
+
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return -EINVAL;
+
+	/* Only Virtual Function #1 has deviceID */
+	if (vfunc_no > 1)
+		return -EINVAL;
+
+	if (!epc->ops->write_header)
+		return 0;
+
+	mutex_lock(&epc->lock);
+	ret = epc->ops->write_header(epc, func_no, vfunc_no, header);
+	mutex_unlock(&epc->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_write_header);
+
+/**
+ * pci_epc_add_epf() - bind PCI endpoint function to an endpoint controller
+ * @epc: the EPC device to which the endpoint function should be added
+ * @epf: the endpoint function to be added
+ * @type: Identifies if the EPC is connected to the primary or secondary
+ *        interface of EPF
+ *
+ * A PCI endpoint device can have one or more functions. In the case of PCIe,
+ * the specification allows up to 8 PCIe endpoint functions. Invoke
+ * pci_epc_add_epf() to add a PCI endpoint function to an endpoint controller.
+ */
+int pci_epc_add_epf(struct pci_epc *epc, struct pci_epf *epf,
+		    enum pci_epc_interface_type type)
+{
+	struct list_head *list;
+	u32 func_no;
+	int ret = 0;
+
+	if (IS_ERR_OR_NULL(epc) || epf->is_vf)
+		return -EINVAL;
+
+	if (type == PRIMARY_INTERFACE && epf->epc)
+		return -EBUSY;
+
+	if (type == SECONDARY_INTERFACE && epf->sec_epc)
+		return -EBUSY;
+
+	mutex_lock(&epc->lock);
+	func_no = find_first_zero_bit(&epc->function_num_map,
+				      BITS_PER_LONG);
+	if (func_no >= BITS_PER_LONG) {
+		ret = -EINVAL;
+		goto ret;
+	}
+
+	if (func_no > epc->max_functions - 1) {
+		dev_err(&epc->dev, "Exceeding max supported Function Number\n");
+		ret = -EINVAL;
+		goto ret;
+	}
+
+	set_bit(func_no, &epc->function_num_map);
+	if (type == PRIMARY_INTERFACE) {
+		epf->func_no = func_no;
+		epf->epc = epc;
+		list = &epf->list;
+	} else {
+		epf->sec_epc_func_no = func_no;
+		epf->sec_epc = epc;
+		list = &epf->sec_epc_list;
+	}
+
+	list_add_tail(list, &epc->pci_epf);
+ret:
+	mutex_unlock(&epc->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_add_epf);
+
+/**
+ * pci_epc_remove_epf() - remove PCI endpoint function from endpoint controller
+ * @epc: the EPC device from which the endpoint function should be removed
+ * @epf: the endpoint function to be removed
+ * @type: identifies if the EPC is connected to the primary or secondary
+ *        interface of EPF
+ *
+ * Invoke to remove PCI endpoint function from the endpoint controller.
+ */
+void pci_epc_remove_epf(struct pci_epc *epc, struct pci_epf *epf,
+			enum pci_epc_interface_type type)
+{
+	struct list_head *list;
+	u32 func_no = 0;
+
+	if (!epc || IS_ERR(epc) || !epf)
+		return;
+
+	if (type == PRIMARY_INTERFACE) {
+		func_no = epf->func_no;
+		list = &epf->list;
+	} else {
+		func_no = epf->sec_epc_func_no;
+		list = &epf->sec_epc_list;
+	}
+
+	mutex_lock(&epc->lock);
+	clear_bit(func_no, &epc->function_num_map);
+	list_del(list);
+	epf->epc = NULL;
+	mutex_unlock(&epc->lock);
+}
+EXPORT_SYMBOL_GPL(pci_epc_remove_epf);
+
+/**
+ * pci_epc_linkup() - Notify the EPF device that EPC device has established a
+ *		      connection with the Root Complex.
+ * @epc: the EPC device which has established link with the host
+ *
+ * Invoke to Notify the EPF device that the EPC device has established a
+ * connection with the Root Complex.
+ */
+void pci_epc_linkup(struct pci_epc *epc)
+{
+	if (!epc || IS_ERR(epc))
+		return;
+
+	atomic_notifier_call_chain(&epc->notifier, LINK_UP, NULL);
+}
+EXPORT_SYMBOL_GPL(pci_epc_linkup);
+
+/**
+ * pci_epc_init_notify() - Notify the EPF device that EPC device's core
+ *			   initialization is completed.
+ * @epc: the EPC device whose core initialization is completed
+ *
+ * Invoke to Notify the EPF device that the EPC device's initialization
+ * is completed.
+ */
+void pci_epc_init_notify(struct pci_epc *epc)
+{
+	if (!epc || IS_ERR(epc))
+		return;
+
+	atomic_notifier_call_chain(&epc->notifier, CORE_INIT, NULL);
+}
+EXPORT_SYMBOL_GPL(pci_epc_init_notify);
+
+/**
+ * pci_epc_destroy() - destroy the EPC device
+ * @epc: the EPC device that has to be destroyed
+ *
+ * Invoke to destroy the PCI EPC device
+ */
+void pci_epc_destroy(struct pci_epc *epc)
+{
+	pci_ep_cfs_remove_epc_group(epc->group);
+	device_unregister(&epc->dev);
+}
+EXPORT_SYMBOL_GPL(pci_epc_destroy);
+
+/**
+ * devm_pci_epc_destroy() - destroy the EPC device
+ * @dev: device that wants to destroy the EPC
+ * @epc: the EPC device that has to be destroyed
+ *
+ * Invoke to destroy the devres associated with this
+ * pci_epc and destroy the EPC device.
+ */
+void devm_pci_epc_destroy(struct device *dev, struct pci_epc *epc)
+{
+	int r;
+
+	r = devres_destroy(dev, devm_pci_epc_release, devm_pci_epc_match,
+			   epc);
+	dev_WARN_ONCE(dev, r, "couldn't find PCI EPC resource\n");
+}
+EXPORT_SYMBOL_GPL(devm_pci_epc_destroy);
+
+static void pci_epc_release(struct device *dev)
+{
+	kfree(to_pci_epc(dev));
+}
+
+/**
+ * __pci_epc_create() - create a new endpoint controller (EPC) device
+ * @dev: device that is creating the new EPC
+ * @ops: function pointers for performing EPC operations
+ * @owner: the owner of the module that creates the EPC device
+ *
+ * Invoke to create a new EPC device and add it to pci_epc class.
+ */
+struct pci_epc *
+__pci_epc_create(struct device *dev, const struct pci_epc_ops *ops,
+		 struct module *owner)
+{
+	int ret;
+	struct pci_epc *epc;
+
+	if (WARN_ON(!dev)) {
+		ret = -EINVAL;
+		goto err_ret;
+	}
+
+	epc = kzalloc(sizeof(*epc), GFP_KERNEL);
+	if (!epc) {
+		ret = -ENOMEM;
+		goto err_ret;
+	}
+
+	mutex_init(&epc->lock);
+	INIT_LIST_HEAD(&epc->pci_epf);
+	ATOMIC_INIT_NOTIFIER_HEAD(&epc->notifier);
+
+	device_initialize(&epc->dev);
+	epc->dev.class = pci_epc_class;
+	epc->dev.parent = dev;
+	epc->dev.release = pci_epc_release;
+	epc->ops = ops;
+
+	ret = dev_set_name(&epc->dev, "%s", dev_name(dev));
+	if (ret)
+		goto put_dev;
+
+	ret = device_add(&epc->dev);
+	if (ret)
+		goto put_dev;
+
+	epc->group = pci_ep_cfs_add_epc_group(dev_name(dev));
+
+	return epc;
+
+put_dev:
+	put_device(&epc->dev);
+	kfree(epc);
+
+err_ret:
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(__pci_epc_create);
+
+/**
+ * __devm_pci_epc_create() - create a new endpoint controller (EPC) device
+ * @dev: device that is creating the new EPC
+ * @ops: function pointers for performing EPC operations
+ * @owner: the owner of the module that creates the EPC device
+ *
+ * Invoke to create a new EPC device and add it to pci_epc class.
+ * While at that, it also associates the device with the pci_epc using devres.
+ * On driver detach, release function is invoked on the devres data,
+ * then, devres data is freed.
+ */
+struct pci_epc *
+__devm_pci_epc_create(struct device *dev, const struct pci_epc_ops *ops,
+		      struct module *owner)
+{
+	struct pci_epc **ptr, *epc;
+
+	ptr = devres_alloc(devm_pci_epc_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	epc = __pci_epc_create(dev, ops, owner);
+	if (!IS_ERR(epc)) {
+		*ptr = epc;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return epc;
+}
+EXPORT_SYMBOL_GPL(__devm_pci_epc_create);
+
+static int __init pci_epc_init(void)
+{
+	pci_epc_class = class_create(THIS_MODULE, "pci_epc");
+	if (IS_ERR(pci_epc_class)) {
+		pr_err("failed to create pci epc class --> %ld\n",
+		       PTR_ERR(pci_epc_class));
+		return PTR_ERR(pci_epc_class);
+	}
+
+	return 0;
+}
+module_init(pci_epc_init);
+
+static void __exit pci_epc_exit(void)
+{
+	class_destroy(pci_epc_class);
+}
+module_exit(pci_epc_exit);
+
+MODULE_DESCRIPTION("PCI EPC Library");
+MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@ti.com>");
+MODULE_LICENSE("GPL v2");