Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 312 insertions, 0 deletions

diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
new file mode 100644
index 000000000..853e04ad2
--- /dev/null
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ACPI PCI Hot Plug Controller Driver
+ *
+ * Copyright (C) 1995,2001 Compaq Computer Corporation
+ * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2001 IBM Corp.
+ * Copyright (C) 2002 Hiroshi Aono (h-aono@ap.jp.nec.com)
+ * Copyright (C) 2002,2003 Takayoshi Kochi (t-kochi@bq.jp.nec.com)
+ * Copyright (C) 2002,2003 NEC Corporation
+ * Copyright (C) 2003-2005 Matthew Wilcox (willy@infradead.org)
+ * Copyright (C) 2003-2005 Hewlett Packard
+ *
+ * All rights reserved.
+ *
+ * Send feedback to <kristen.c.accardi@intel.com>
+ *
+ */
+
+#define pr_fmt(fmt) "acpiphp: " fmt
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/pci-acpi.h>
+#include <linux/pci_hotplug.h>
+#include <linux/slab.h>
+#include <linux/smp.h>
+#include "acpiphp.h"
+
+/* name size which is used for entries in pcihpfs */
+#define SLOT_NAME_SIZE  21              /* {_SUN} */
+
+bool acpiphp_disabled;
+
+/* local variables */
+static struct acpiphp_attention_info *attention_info;
+
+#define DRIVER_VERSION	"0.5"
+#define DRIVER_AUTHOR	"Greg Kroah-Hartman <gregkh@us.ibm.com>, Takayoshi Kochi <t-kochi@bq.jp.nec.com>, Matthew Wilcox <willy@infradead.org>"
+#define DRIVER_DESC	"ACPI Hot Plug PCI Controller Driver"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_PARM_DESC(disable, "disable acpiphp driver");
+module_param_named(disable, acpiphp_disabled, bool, 0444);
+
+static int enable_slot(struct hotplug_slot *slot);
+static int disable_slot(struct hotplug_slot *slot);
+static int set_attention_status(struct hotplug_slot *slot, u8 value);
+static int get_power_status(struct hotplug_slot *slot, u8 *value);
+static int get_attention_status(struct hotplug_slot *slot, u8 *value);
+static int get_latch_status(struct hotplug_slot *slot, u8 *value);
+static int get_adapter_status(struct hotplug_slot *slot, u8 *value);
+
+static const struct hotplug_slot_ops acpi_hotplug_slot_ops = {
+	.enable_slot		= enable_slot,
+	.disable_slot		= disable_slot,
+	.set_attention_status	= set_attention_status,
+	.get_power_status	= get_power_status,
+	.get_attention_status	= get_attention_status,
+	.get_latch_status	= get_latch_status,
+	.get_adapter_status	= get_adapter_status,
+};
+
+/**
+ * acpiphp_register_attention - set attention LED callback
+ * @info: must be completely filled with LED callbacks
+ *
+ * Description: This is used to register a hardware specific ACPI
+ * driver that manipulates the attention LED.  All the fields in
+ * info must be set.
+ */
+int acpiphp_register_attention(struct acpiphp_attention_info *info)
+{
+	int retval = -EINVAL;
+
+	if (info && info->owner && info->set_attn &&
+			info->get_attn && !attention_info) {
+		retval = 0;
+		attention_info = info;
+	}
+	return retval;
+}
+EXPORT_SYMBOL_GPL(acpiphp_register_attention);
+
+
+/**
+ * acpiphp_unregister_attention - unset attention LED callback
+ * @info: must match the pointer used to register
+ *
+ * Description: This is used to un-register a hardware specific acpi
+ * driver that manipulates the attention LED.  The pointer to the
+ * info struct must be the same as the one used to set it.
+ */
+int acpiphp_unregister_attention(struct acpiphp_attention_info *info)
+{
+	int retval = -EINVAL;
+
+	if (info && attention_info == info) {
+		attention_info = NULL;
+		retval = 0;
+	}
+	return retval;
+}
+EXPORT_SYMBOL_GPL(acpiphp_unregister_attention);
+
+
+/**
+ * enable_slot - power on and enable a slot
+ * @hotplug_slot: slot to enable
+ *
+ * Actual tasks are done in acpiphp_enable_slot()
+ */
+static int enable_slot(struct hotplug_slot *hotplug_slot)
+{
+	struct slot *slot = to_slot(hotplug_slot);
+
+	pr_debug("%s - physical_slot = %s\n", __func__, slot_name(slot));
+
+	/* enable the specified slot */
+	return acpiphp_enable_slot(slot->acpi_slot);
+}
+
+
+/**
+ * disable_slot - disable and power off a slot
+ * @hotplug_slot: slot to disable
+ *
+ * Actual tasks are done in acpiphp_disable_slot()
+ */
+static int disable_slot(struct hotplug_slot *hotplug_slot)
+{
+	struct slot *slot = to_slot(hotplug_slot);
+
+	pr_debug("%s - physical_slot = %s\n", __func__, slot_name(slot));
+
+	/* disable the specified slot */
+	return acpiphp_disable_slot(slot->acpi_slot);
+}
+
+
+/**
+ * set_attention_status - set attention LED
+ * @hotplug_slot: slot to set attention LED on
+ * @status: value to set attention LED to (0 or 1)
+ *
+ * attention status LED, so we use a callback that
+ * was registered with us.  This allows hardware specific
+ * ACPI implementations to blink the light for us.
+ */
+static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status)
+{
+	int retval = -ENODEV;
+
+	pr_debug("%s - physical_slot = %s\n", __func__,
+		hotplug_slot_name(hotplug_slot));
+
+	if (attention_info && try_module_get(attention_info->owner)) {
+		retval = attention_info->set_attn(hotplug_slot, status);
+		module_put(attention_info->owner);
+	} else
+		attention_info = NULL;
+	return retval;
+}
+
+
+/**
+ * get_power_status - get power status of a slot
+ * @hotplug_slot: slot to get status
+ * @value: pointer to store status
+ *
+ * Some platforms may not implement _STA method properly.
+ * In that case, the value returned may not be reliable.
+ */
+static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value)
+{
+	struct slot *slot = to_slot(hotplug_slot);
+
+	pr_debug("%s - physical_slot = %s\n", __func__, slot_name(slot));
+
+	*value = acpiphp_get_power_status(slot->acpi_slot);
+
+	return 0;
+}
+
+
+/**
+ * get_attention_status - get attention LED status
+ * @hotplug_slot: slot to get status from
+ * @value: returns with value of attention LED
+ *
+ * ACPI doesn't have known method to determine the state
+ * of the attention status LED, so we use a callback that
+ * was registered with us.  This allows hardware specific
+ * ACPI implementations to determine its state.
+ */
+static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value)
+{
+	int retval = -EINVAL;
+
+	pr_debug("%s - physical_slot = %s\n", __func__,
+		hotplug_slot_name(hotplug_slot));
+
+	if (attention_info && try_module_get(attention_info->owner)) {
+		retval = attention_info->get_attn(hotplug_slot, value);
+		module_put(attention_info->owner);
+	} else
+		attention_info = NULL;
+	return retval;
+}
+
+
+/**
+ * get_latch_status - get latch status of a slot
+ * @hotplug_slot: slot to get status
+ * @value: pointer to store status
+ *
+ * ACPI doesn't provide any formal means to access latch status.
+ * Instead, we fake latch status from _STA.
+ */
+static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value)
+{
+	struct slot *slot = to_slot(hotplug_slot);
+
+	pr_debug("%s - physical_slot = %s\n", __func__, slot_name(slot));
+
+	*value = acpiphp_get_latch_status(slot->acpi_slot);
+
+	return 0;
+}
+
+
+/**
+ * get_adapter_status - get adapter status of a slot
+ * @hotplug_slot: slot to get status
+ * @value: pointer to store status
+ *
+ * ACPI doesn't provide any formal means to access adapter status.
+ * Instead, we fake adapter status from _STA.
+ */
+static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
+{
+	struct slot *slot = to_slot(hotplug_slot);
+
+	pr_debug("%s - physical_slot = %s\n", __func__, slot_name(slot));
+
+	*value = acpiphp_get_adapter_status(slot->acpi_slot);
+
+	return 0;
+}
+
+/* callback routine to initialize 'struct slot' for each slot */
+int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot,
+				  unsigned int sun)
+{
+	struct slot *slot;
+	int retval = -ENOMEM;
+	char name[SLOT_NAME_SIZE];
+
+	slot = kzalloc(sizeof(*slot), GFP_KERNEL);
+	if (!slot)
+		goto error;
+
+	slot->hotplug_slot.ops = &acpi_hotplug_slot_ops;
+
+	slot->acpi_slot = acpiphp_slot;
+
+	acpiphp_slot->slot = slot;
+	slot->sun = sun;
+	snprintf(name, SLOT_NAME_SIZE, "%u", sun);
+
+	retval = pci_hp_register(&slot->hotplug_slot, acpiphp_slot->bus,
+				 acpiphp_slot->device, name);
+	if (retval == -EBUSY)
+		goto error_slot;
+	if (retval) {
+		pr_err("pci_hp_register failed with error %d\n", retval);
+		goto error_slot;
+	}
+
+	pr_info("Slot [%s] registered\n", slot_name(slot));
+
+	return 0;
+error_slot:
+	kfree(slot);
+error:
+	return retval;
+}
+
+
+void acpiphp_unregister_hotplug_slot(struct acpiphp_slot *acpiphp_slot)
+{
+	struct slot *slot = acpiphp_slot->slot;
+
+	pr_info("Slot [%s] unregistered\n", slot_name(slot));
+
+	pci_hp_deregister(&slot->hotplug_slot);
+	kfree(slot);
+}
+
+
+void __init acpiphp_init(void)
+{
+	pr_info(DRIVER_DESC " version: " DRIVER_VERSION "%s\n",
+		acpiphp_disabled ? ", disabled by user; please report a bug"
+				 : "");
+}