Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 541 insertions, 0 deletions

diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
new file mode 100644
index 000000000..491986197
--- /dev/null
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -0,0 +1,541 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * PCI Hot Plug Controller Driver for RPA-compliant PPC64 platform.
+ * Copyright (C) 2003 Linda Xie <lxie@us.ibm.com>
+ *
+ * All rights reserved.
+ *
+ * Send feedback to <lxie@us.ibm.com>
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/of.h>
+#include <linux/pci.h>
+#include <linux/pci_hotplug.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <asm/firmware.h>
+#include <asm/eeh.h>       /* for eeh_add_device() */
+#include <asm/rtas.h>		/* rtas_call */
+#include <asm/pci-bridge.h>	/* for pci_controller */
+#include <asm/prom.h>
+#include "../pci.h"		/* for pci_add_new_bus */
+				/* and pci_do_scan_bus */
+#include "rpaphp.h"
+
+bool rpaphp_debug;
+LIST_HEAD(rpaphp_slot_head);
+EXPORT_SYMBOL_GPL(rpaphp_slot_head);
+
+#define DRIVER_VERSION	"0.1"
+#define DRIVER_AUTHOR	"Linda Xie <lxie@us.ibm.com>"
+#define DRIVER_DESC	"RPA HOT Plug PCI Controller Driver"
+
+#define MAX_LOC_CODE 128
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param_named(debug, rpaphp_debug, bool, 0644);
+
+/**
+ * set_attention_status - set attention LED
+ * @hotplug_slot: target &hotplug_slot
+ * @value: LED control value
+ *
+ * echo 0 > attention -- set LED OFF
+ * echo 1 > attention -- set LED ON
+ * echo 2 > attention -- set LED ID(identify, light is blinking)
+ */
+static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 value)
+{
+	int rc;
+	struct slot *slot = to_slot(hotplug_slot);
+
+	switch (value) {
+	case 0:
+	case 1:
+	case 2:
+		break;
+	default:
+		value = 1;
+		break;
+	}
+
+	rc = rtas_set_indicator(DR_INDICATOR, slot->index, value);
+	if (!rc)
+		slot->attention_status = value;
+
+	return rc;
+}
+
+/**
+ * get_power_status - get power status of a slot
+ * @hotplug_slot: slot to get status
+ * @value: pointer to store status
+ */
+static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value)
+{
+	int retval, level;
+	struct slot *slot = to_slot(hotplug_slot);
+
+	retval = rtas_get_power_level(slot->power_domain, &level);
+	if (!retval)
+		*value = level;
+	return retval;
+}
+
+/**
+ * get_attention_status - get attention LED status
+ * @hotplug_slot: slot to get status
+ * @value: pointer to store status
+ */
+static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value)
+{
+	struct slot *slot = to_slot(hotplug_slot);
+	*value = slot->attention_status;
+	return 0;
+}
+
+static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
+{
+	struct slot *slot = to_slot(hotplug_slot);
+	int rc, state;
+
+	rc = rpaphp_get_sensor_state(slot, &state);
+
+	*value = NOT_VALID;
+	if (rc)
+		return rc;
+
+	if (state == EMPTY)
+		*value = EMPTY;
+	else if (state == PRESENT)
+		*value = slot->state;
+
+	return 0;
+}
+
+static enum pci_bus_speed get_max_bus_speed(struct slot *slot)
+{
+	enum pci_bus_speed speed;
+	switch (slot->type) {
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+	case 6:
+		speed = PCI_SPEED_33MHz;	/* speed for case 1-6 */
+		break;
+	case 7:
+	case 8:
+		speed = PCI_SPEED_66MHz;
+		break;
+	case 11:
+	case 14:
+		speed = PCI_SPEED_66MHz_PCIX;
+		break;
+	case 12:
+	case 15:
+		speed = PCI_SPEED_100MHz_PCIX;
+		break;
+	case 13:
+	case 16:
+		speed = PCI_SPEED_133MHz_PCIX;
+		break;
+	default:
+		speed = PCI_SPEED_UNKNOWN;
+		break;
+	}
+
+	return speed;
+}
+
+static int get_children_props(struct device_node *dn, const __be32 **drc_indexes,
+			      const __be32 **drc_names, const __be32 **drc_types,
+			      const __be32 **drc_power_domains)
+{
+	const __be32 *indexes, *names, *types, *domains;
+
+	indexes = of_get_property(dn, "ibm,drc-indexes", NULL);
+	names = of_get_property(dn, "ibm,drc-names", NULL);
+	types = of_get_property(dn, "ibm,drc-types", NULL);
+	domains = of_get_property(dn, "ibm,drc-power-domains", NULL);
+
+	if (!indexes || !names || !types || !domains) {
+		/* Slot does not have dynamically-removable children */
+		return -EINVAL;
+	}
+	if (drc_indexes)
+		*drc_indexes = indexes;
+	if (drc_names)
+		/* &drc_names[1] contains NULL terminated slot names */
+		*drc_names = names;
+	if (drc_types)
+		/* &drc_types[1] contains NULL terminated slot types */
+		*drc_types = types;
+	if (drc_power_domains)
+		*drc_power_domains = domains;
+
+	return 0;
+}
+
+
+/* Verify the existence of 'drc_name' and/or 'drc_type' within the
+ * current node.  First obtain its my-drc-index property.  Next,
+ * obtain the DRC info from its parent.  Use the my-drc-index for
+ * correlation, and obtain/validate the requested properties.
+ */
+
+static int rpaphp_check_drc_props_v1(struct device_node *dn, char *drc_name,
+				char *drc_type, unsigned int my_index)
+{
+	char *name_tmp, *type_tmp;
+	const __be32 *indexes, *names;
+	const __be32 *types, *domains;
+	int i, rc;
+
+	rc = get_children_props(dn->parent, &indexes, &names, &types, &domains);
+	if (rc < 0) {
+		return -EINVAL;
+	}
+
+	name_tmp = (char *) &names[1];
+	type_tmp = (char *) &types[1];
+
+	/* Iterate through parent properties, looking for my-drc-index */
+	for (i = 0; i < be32_to_cpu(indexes[0]); i++) {
+		if (be32_to_cpu(indexes[i + 1]) == my_index)
+			break;
+
+		name_tmp += (strlen(name_tmp) + 1);
+		type_tmp += (strlen(type_tmp) + 1);
+	}
+
+	if (((drc_name == NULL) || (drc_name && !strcmp(drc_name, name_tmp))) &&
+	    ((drc_type == NULL) || (drc_type && !strcmp(drc_type, type_tmp))))
+		return 0;
+
+	return -EINVAL;
+}
+
+static int rpaphp_check_drc_props_v2(struct device_node *dn, char *drc_name,
+				char *drc_type, unsigned int my_index)
+{
+	struct property *info;
+	unsigned int entries;
+	struct of_drc_info drc;
+	const __be32 *value;
+	char cell_drc_name[MAX_DRC_NAME_LEN];
+	int j;
+
+	info = of_find_property(dn->parent, "ibm,drc-info", NULL);
+	if (info == NULL)
+		return -EINVAL;
+
+	value = of_prop_next_u32(info, NULL, &entries);
+	if (!value)
+		return -EINVAL;
+	else
+		value++;
+
+	for (j = 0; j < entries; j++) {
+		of_read_drc_info_cell(&info, &value, &drc);
+
+		/* Should now know end of current entry */
+
+		/* Found it */
+		if (my_index >= drc.drc_index_start && my_index <= drc.last_drc_index) {
+			int index = my_index - drc.drc_index_start;
+			sprintf(cell_drc_name, "%s%d", drc.drc_name_prefix,
+				drc.drc_name_suffix_start + index);
+			break;
+		}
+	}
+
+	if (((drc_name == NULL) ||
+	     (drc_name && !strcmp(drc_name, cell_drc_name))) &&
+	    ((drc_type == NULL) ||
+	     (drc_type && !strcmp(drc_type, drc.drc_type))))
+		return 0;
+
+	return -EINVAL;
+}
+
+int rpaphp_check_drc_props(struct device_node *dn, char *drc_name,
+			char *drc_type)
+{
+	const __be32 *my_index;
+
+	my_index = of_get_property(dn, "ibm,my-drc-index", NULL);
+	if (!my_index) {
+		/* Node isn't DLPAR/hotplug capable */
+		return -EINVAL;
+	}
+
+	if (of_find_property(dn->parent, "ibm,drc-info", NULL))
+		return rpaphp_check_drc_props_v2(dn, drc_name, drc_type,
+						be32_to_cpu(*my_index));
+	else
+		return rpaphp_check_drc_props_v1(dn, drc_name, drc_type,
+						be32_to_cpu(*my_index));
+}
+EXPORT_SYMBOL_GPL(rpaphp_check_drc_props);
+
+
+static int is_php_type(char *drc_type)
+{
+	char *endptr;
+
+	/* PCI Hotplug nodes have an integer for drc_type */
+	simple_strtoul(drc_type, &endptr, 10);
+	if (endptr == drc_type)
+		return 0;
+
+	return 1;
+}
+
+/**
+ * is_php_dn() - return 1 if this is a hotpluggable pci slot, else 0
+ * @dn: target &device_node
+ * @indexes: passed to get_children_props()
+ * @names: passed to get_children_props()
+ * @types: returned from get_children_props()
+ * @power_domains:
+ *
+ * This routine will return true only if the device node is
+ * a hotpluggable slot. This routine will return false
+ * for built-in pci slots (even when the built-in slots are
+ * dlparable.)
+ */
+static int is_php_dn(struct device_node *dn, const __be32 **indexes,
+		     const __be32 **names, const __be32 **types,
+		     const __be32 **power_domains)
+{
+	const __be32 *drc_types;
+	int rc;
+
+	rc = get_children_props(dn, indexes, names, &drc_types, power_domains);
+	if (rc < 0)
+		return 0;
+
+	if (!is_php_type((char *) &drc_types[1]))
+		return 0;
+
+	*types = drc_types;
+	return 1;
+}
+
+static int rpaphp_drc_info_add_slot(struct device_node *dn)
+{
+	struct slot *slot;
+	struct property *info;
+	struct of_drc_info drc;
+	char drc_name[MAX_DRC_NAME_LEN];
+	const __be32 *cur;
+	u32 count;
+	int retval = 0;
+
+	info = of_find_property(dn, "ibm,drc-info", NULL);
+	if (!info)
+		return 0;
+
+	cur = of_prop_next_u32(info, NULL, &count);
+	if (cur)
+		cur++;
+	else
+		return 0;
+
+	of_read_drc_info_cell(&info, &cur, &drc);
+	if (!is_php_type(drc.drc_type))
+		return 0;
+
+	sprintf(drc_name, "%s%d", drc.drc_name_prefix, drc.drc_name_suffix_start);
+
+	slot = alloc_slot_struct(dn, drc.drc_index_start, drc_name, drc.drc_power_domain);
+	if (!slot)
+		return -ENOMEM;
+
+	slot->type = simple_strtoul(drc.drc_type, NULL, 10);
+	retval = rpaphp_enable_slot(slot);
+	if (!retval)
+		retval = rpaphp_register_slot(slot);
+
+	if (retval)
+		dealloc_slot_struct(slot);
+
+	return retval;
+}
+
+static int rpaphp_drc_add_slot(struct device_node *dn)
+{
+	struct slot *slot;
+	int retval = 0;
+	int i;
+	const __be32 *indexes, *names, *types, *power_domains;
+	char *name, *type;
+
+	/* If this is not a hotplug slot, return without doing anything. */
+	if (!is_php_dn(dn, &indexes, &names, &types, &power_domains))
+		return 0;
+
+	dbg("Entry %s: dn=%pOF\n", __func__, dn);
+
+	/* register PCI devices */
+	name = (char *) &names[1];
+	type = (char *) &types[1];
+	for (i = 0; i < be32_to_cpu(indexes[0]); i++) {
+		int index;
+
+		index = be32_to_cpu(indexes[i + 1]);
+		slot = alloc_slot_struct(dn, index, name,
+					 be32_to_cpu(power_domains[i + 1]));
+		if (!slot)
+			return -ENOMEM;
+
+		slot->type = simple_strtoul(type, NULL, 10);
+
+		dbg("Found drc-index:0x%x drc-name:%s drc-type:%s\n",
+				index, name, type);
+
+		retval = rpaphp_enable_slot(slot);
+		if (!retval)
+			retval = rpaphp_register_slot(slot);
+
+		if (retval)
+			dealloc_slot_struct(slot);
+
+		name += strlen(name) + 1;
+		type += strlen(type) + 1;
+	}
+	dbg("%s - Exit: rc[%d]\n", __func__, retval);
+
+	/* XXX FIXME: reports a failure only if last entry in loop failed */
+	return retval;
+}
+
+/**
+ * rpaphp_add_slot -- declare a hotplug slot to the hotplug subsystem.
+ * @dn: device node of slot
+ *
+ * This subroutine will register a hotpluggable slot with the
+ * PCI hotplug infrastructure. This routine is typically called
+ * during boot time, if the hotplug slots are present at boot time,
+ * or is called later, by the dlpar add code, if the slot is
+ * being dynamically added during runtime.
+ *
+ * If the device node points at an embedded (built-in) slot, this
+ * routine will just return without doing anything, since embedded
+ * slots cannot be hotplugged.
+ *
+ * To remove a slot, it suffices to call rpaphp_deregister_slot().
+ */
+int rpaphp_add_slot(struct device_node *dn)
+{
+	if (!of_node_name_eq(dn, "pci"))
+		return 0;
+
+	if (of_find_property(dn, "ibm,drc-info", NULL))
+		return rpaphp_drc_info_add_slot(dn);
+	else
+		return rpaphp_drc_add_slot(dn);
+}
+EXPORT_SYMBOL_GPL(rpaphp_add_slot);
+
+static void __exit cleanup_slots(void)
+{
+	struct slot *slot, *next;
+
+	/*
+	 * Unregister all of our slots with the pci_hotplug subsystem,
+	 * and free up all memory that we had allocated.
+	 */
+
+	list_for_each_entry_safe(slot, next, &rpaphp_slot_head,
+				 rpaphp_slot_list) {
+		list_del(&slot->rpaphp_slot_list);
+		pci_hp_deregister(&slot->hotplug_slot);
+		dealloc_slot_struct(slot);
+	}
+}
+
+static int __init rpaphp_init(void)
+{
+	struct device_node *dn;
+
+	info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
+
+	for_each_node_by_name(dn, "pci")
+		rpaphp_add_slot(dn);
+
+	return 0;
+}
+
+static void __exit rpaphp_exit(void)
+{
+	cleanup_slots();
+}
+
+static int enable_slot(struct hotplug_slot *hotplug_slot)
+{
+	struct slot *slot = to_slot(hotplug_slot);
+	int state;
+	int retval;
+
+	if (slot->state == CONFIGURED)
+		return 0;
+
+	retval = rpaphp_get_sensor_state(slot, &state);
+	if (retval)
+		return retval;
+
+	if (state == PRESENT) {
+		pseries_eeh_init_edev_recursive(PCI_DN(slot->dn));
+
+		pci_lock_rescan_remove();
+		pci_hp_add_devices(slot->bus);
+		pci_unlock_rescan_remove();
+		slot->state = CONFIGURED;
+	} else if (state == EMPTY) {
+		slot->state = EMPTY;
+	} else {
+		err("%s: slot[%s] is in invalid state\n", __func__, slot->name);
+		slot->state = NOT_VALID;
+		return -EINVAL;
+	}
+
+	slot->bus->max_bus_speed = get_max_bus_speed(slot);
+	return 0;
+}
+
+static int disable_slot(struct hotplug_slot *hotplug_slot)
+{
+	struct slot *slot = to_slot(hotplug_slot);
+	if (slot->state == NOT_CONFIGURED)
+		return -EINVAL;
+
+	pci_lock_rescan_remove();
+	pci_hp_remove_devices(slot->bus);
+	pci_unlock_rescan_remove();
+	vm_unmap_aliases();
+
+	slot->state = NOT_CONFIGURED;
+	return 0;
+}
+
+const struct hotplug_slot_ops rpaphp_hotplug_slot_ops = {
+	.enable_slot = enable_slot,
+	.disable_slot = disable_slot,
+	.set_attention_status = set_attention_status,
+	.get_power_status = get_power_status,
+	.get_attention_status = get_attention_status,
+	.get_adapter_status = get_adapter_status,
+};
+
+module_init(rpaphp_init);
+module_exit(rpaphp_exit);