Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 447 insertions, 0 deletions

diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
new file mode 100644
index 000000000..d2a1da8d9
--- /dev/null
+++ b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
@@ -0,0 +1,447 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Amlogic G12A USB3 + PCIE Combo PHY driver
+ *
+ * Copyright (C) 2017 Amlogic, Inc. All rights reserved
+ * Copyright (C) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/phy/phy.h>
+
+#define PHY_R0							0x00
+	#define PHY_R0_PCIE_POWER_STATE				GENMASK(4, 0)
+	#define PHY_R0_PCIE_USB3_SWITCH				GENMASK(6, 5)
+
+#define PHY_R1							0x04
+	#define PHY_R1_PHY_TX1_TERM_OFFSET			GENMASK(4, 0)
+	#define PHY_R1_PHY_TX0_TERM_OFFSET			GENMASK(9, 5)
+	#define PHY_R1_PHY_RX1_EQ				GENMASK(12, 10)
+	#define PHY_R1_PHY_RX0_EQ				GENMASK(15, 13)
+	#define PHY_R1_PHY_LOS_LEVEL				GENMASK(20, 16)
+	#define PHY_R1_PHY_LOS_BIAS				GENMASK(23, 21)
+	#define PHY_R1_PHY_REF_CLKDIV2				BIT(24)
+	#define PHY_R1_PHY_MPLL_MULTIPLIER			GENMASK(31, 25)
+
+#define PHY_R2							0x08
+	#define PHY_R2_PCS_TX_DEEMPH_GEN2_6DB			GENMASK(5, 0)
+	#define PHY_R2_PCS_TX_DEEMPH_GEN2_3P5DB			GENMASK(11, 6)
+	#define PHY_R2_PCS_TX_DEEMPH_GEN1			GENMASK(17, 12)
+	#define PHY_R2_PHY_TX_VBOOST_LVL			GENMASK(20, 18)
+
+#define PHY_R4							0x10
+	#define PHY_R4_PHY_CR_WRITE				BIT(0)
+	#define PHY_R4_PHY_CR_READ				BIT(1)
+	#define PHY_R4_PHY_CR_DATA_IN				GENMASK(17, 2)
+	#define PHY_R4_PHY_CR_CAP_DATA				BIT(18)
+	#define PHY_R4_PHY_CR_CAP_ADDR				BIT(19)
+
+#define PHY_R5							0x14
+	#define PHY_R5_PHY_CR_DATA_OUT				GENMASK(15, 0)
+	#define PHY_R5_PHY_CR_ACK				BIT(16)
+	#define PHY_R5_PHY_BS_OUT				BIT(17)
+
+#define PCIE_RESET_DELAY					500
+
+struct phy_g12a_usb3_pcie_priv {
+	struct regmap		*regmap;
+	struct regmap		*regmap_cr;
+	struct clk		*clk_ref;
+	struct reset_control	*reset;
+	struct phy		*phy;
+	unsigned int		mode;
+};
+
+static const struct regmap_config phy_g12a_usb3_pcie_regmap_conf = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = PHY_R5,
+};
+
+static int phy_g12a_usb3_pcie_cr_bus_addr(struct phy_g12a_usb3_pcie_priv *priv,
+					  unsigned int addr)
+{
+	unsigned int val, reg;
+	int ret;
+
+	reg = FIELD_PREP(PHY_R4_PHY_CR_DATA_IN, addr);
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_CAP_ADDR);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       !(val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_cr_bus_read(void *context, unsigned int addr,
+					  unsigned int *data)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = context;
+	unsigned int val;
+	int ret;
+
+	ret = phy_g12a_usb3_pcie_cr_bus_addr(priv, addr);
+	if (ret)
+		return ret;
+
+	regmap_write(priv->regmap, PHY_R4, 0);
+	regmap_write(priv->regmap, PHY_R4, PHY_R4_PHY_CR_READ);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	*data = FIELD_GET(PHY_R5_PHY_CR_DATA_OUT, val);
+
+	regmap_write(priv->regmap, PHY_R4, 0);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       !(val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_cr_bus_write(void *context, unsigned int addr,
+					   unsigned int data)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = context;
+	unsigned int val, reg;
+	int ret;
+
+	ret = phy_g12a_usb3_pcie_cr_bus_addr(priv, addr);
+	if (ret)
+		return ret;
+
+	reg = FIELD_PREP(PHY_R4_PHY_CR_DATA_IN, data);
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_CAP_DATA);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK) == 0,
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_WRITE);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK) == 0,
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct regmap_config phy_g12a_usb3_pcie_cr_regmap_conf = {
+	.reg_bits = 16,
+	.val_bits = 16,
+	.reg_read = phy_g12a_usb3_pcie_cr_bus_read,
+	.reg_write = phy_g12a_usb3_pcie_cr_bus_write,
+	.max_register = 0xffff,
+	.disable_locking = true,
+};
+
+static int phy_g12a_usb3_init(struct phy *phy)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+	int data, ret;
+
+	ret = reset_control_reset(priv->reset);
+	if (ret)
+		return ret;
+
+	/* Switch PHY to USB3 */
+	/* TODO figure out how to handle when PCIe was set in the bootloader */
+	regmap_update_bits(priv->regmap, PHY_R0,
+			   PHY_R0_PCIE_USB3_SWITCH,
+			   PHY_R0_PCIE_USB3_SWITCH);
+
+	/*
+	 * WORKAROUND: There is SSPHY suspend bug due to
+	 * which USB enumerates
+	 * in HS mode instead of SS mode. Workaround it by asserting
+	 * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus
+	 * mode
+	 */
+	ret = regmap_update_bits(priv->regmap_cr, 0x102d, BIT(7), BIT(7));
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(priv->regmap_cr, 0x1010, 0xff0, 20);
+	if (ret)
+		return ret;
+
+	/*
+	 * Fix RX Equalization setting as follows
+	 * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
+	 * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
+	 * LANE0.RX_OVRD_IN_HI.RX_EQ set to 3
+	 * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
+	 */
+	ret = regmap_read(priv->regmap_cr, 0x1006, &data);
+	if (ret)
+		return ret;
+
+	data &= ~BIT(6);
+	data |= BIT(7);
+	data &= ~(0x7 << 8);
+	data |= (0x3 << 8);
+	data |= (1 << 11);
+	ret = regmap_write(priv->regmap_cr, 0x1006, data);
+	if (ret)
+		return ret;
+
+	/*
+	 * Set EQ and TX launch amplitudes as follows
+	 * LANE0.TX_OVRD_DRV_LO.PREEMPH set to 22
+	 * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 127
+	 * LANE0.TX_OVRD_DRV_LO.EN set to 1.
+	 */
+	ret = regmap_read(priv->regmap_cr, 0x1002, &data);
+	if (ret)
+		return ret;
+
+	data &= ~0x3f80;
+	data |= (0x16 << 7);
+	data &= ~0x7f;
+	data |= (0x7f | BIT(14));
+	ret = regmap_write(priv->regmap_cr, 0x1002, data);
+	if (ret)
+		return ret;
+
+	/* MPLL_LOOP_CTL.PROP_CNTRL = 8 */
+	ret = regmap_update_bits(priv->regmap_cr, 0x30, 0xf << 4, 8 << 4);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(priv->regmap, PHY_R2,
+			PHY_R2_PHY_TX_VBOOST_LVL,
+			FIELD_PREP(PHY_R2_PHY_TX_VBOOST_LVL, 0x4));
+
+	regmap_update_bits(priv->regmap, PHY_R1,
+			PHY_R1_PHY_LOS_BIAS | PHY_R1_PHY_LOS_LEVEL,
+			FIELD_PREP(PHY_R1_PHY_LOS_BIAS, 4) |
+			FIELD_PREP(PHY_R1_PHY_LOS_LEVEL, 9));
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_power_on(struct phy *phy)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+
+	if (priv->mode == PHY_TYPE_USB3)
+		return 0;
+
+	regmap_update_bits(priv->regmap, PHY_R0,
+			   PHY_R0_PCIE_POWER_STATE,
+			   FIELD_PREP(PHY_R0_PCIE_POWER_STATE, 0x1c));
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_power_off(struct phy *phy)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+
+	if (priv->mode == PHY_TYPE_USB3)
+		return 0;
+
+	regmap_update_bits(priv->regmap, PHY_R0,
+			   PHY_R0_PCIE_POWER_STATE,
+			   FIELD_PREP(PHY_R0_PCIE_POWER_STATE, 0x1d));
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_reset(struct phy *phy)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	if (priv->mode == PHY_TYPE_USB3)
+		return 0;
+
+	ret = reset_control_assert(priv->reset);
+	if (ret)
+		return ret;
+
+	udelay(PCIE_RESET_DELAY);
+
+	ret = reset_control_deassert(priv->reset);
+	if (ret)
+		return ret;
+
+	udelay(PCIE_RESET_DELAY);
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_init(struct phy *phy)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+
+	if (priv->mode == PHY_TYPE_USB3)
+		return phy_g12a_usb3_init(phy);
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_exit(struct phy *phy)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+
+	if (priv->mode == PHY_TYPE_USB3)
+		return reset_control_reset(priv->reset);
+
+	return 0;
+}
+
+static struct phy *phy_g12a_usb3_pcie_xlate(struct device *dev,
+					    struct of_phandle_args *args)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = dev_get_drvdata(dev);
+	unsigned int mode;
+
+	if (args->args_count < 1) {
+		dev_err(dev, "invalid number of arguments\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	mode = args->args[0];
+
+	if (mode != PHY_TYPE_USB3 && mode != PHY_TYPE_PCIE) {
+		dev_err(dev, "invalid phy mode select argument\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	priv->mode = mode;
+
+	return priv->phy;
+}
+
+static const struct phy_ops phy_g12a_usb3_pcie_ops = {
+	.init		= phy_g12a_usb3_pcie_init,
+	.exit		= phy_g12a_usb3_pcie_exit,
+	.power_on	= phy_g12a_usb3_pcie_power_on,
+	.power_off	= phy_g12a_usb3_pcie_power_off,
+	.reset		= phy_g12a_usb3_pcie_reset,
+	.owner		= THIS_MODULE,
+};
+
+static int phy_g12a_usb3_pcie_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct phy_g12a_usb3_pcie_priv *priv;
+	struct phy_provider *phy_provider;
+	void __iomem *base;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->regmap = devm_regmap_init_mmio(dev, base,
+					     &phy_g12a_usb3_pcie_regmap_conf);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->regmap_cr = devm_regmap_init(dev, NULL, priv,
+					   &phy_g12a_usb3_pcie_cr_regmap_conf);
+	if (IS_ERR(priv->regmap_cr))
+		return PTR_ERR(priv->regmap_cr);
+
+	priv->clk_ref = devm_clk_get_enabled(dev, "ref_clk");
+	if (IS_ERR(priv->clk_ref))
+		return PTR_ERR(priv->clk_ref);
+
+	priv->reset = devm_reset_control_array_get_exclusive(dev);
+	if (IS_ERR(priv->reset))
+		return PTR_ERR(priv->reset);
+
+	priv->phy = devm_phy_create(dev, np, &phy_g12a_usb3_pcie_ops);
+	if (IS_ERR(priv->phy))
+		return dev_err_probe(dev, PTR_ERR(priv->phy), "failed to create PHY\n");
+
+	phy_set_drvdata(priv->phy, priv);
+	dev_set_drvdata(dev, priv);
+
+	phy_provider = devm_of_phy_provider_register(dev,
+						     phy_g12a_usb3_pcie_xlate);
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id phy_g12a_usb3_pcie_of_match[] = {
+	{ .compatible = "amlogic,g12a-usb3-pcie-phy", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, phy_g12a_usb3_pcie_of_match);
+
+static struct platform_driver phy_g12a_usb3_pcie_driver = {
+	.probe	= phy_g12a_usb3_pcie_probe,
+	.driver	= {
+		.name		= "phy-g12a-usb3-pcie",
+		.of_match_table	= phy_g12a_usb3_pcie_of_match,
+	},
+};
+module_platform_driver(phy_g12a_usb3_pcie_driver);
+
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_DESCRIPTION("Amlogic G12A USB3 + PCIE Combo PHY driver");
+MODULE_LICENSE("GPL v2");