Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 272 insertions, 0 deletions

diff --git a/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
new file mode 100644
index 000000000..d437a249c
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+
+/* PHY registers */
+#define UNIPHY_PLL_REFCLK_CFG		0x000
+#define UNIPHY_PLL_PWRGEN_CFG		0x014
+#define UNIPHY_PLL_GLB_CFG		0x020
+#define UNIPHY_PLL_SDM_CFG0		0x038
+#define UNIPHY_PLL_SDM_CFG1		0x03C
+#define UNIPHY_PLL_SDM_CFG2		0x040
+#define UNIPHY_PLL_SDM_CFG3		0x044
+#define UNIPHY_PLL_SDM_CFG4		0x048
+#define UNIPHY_PLL_SSC_CFG0		0x04C
+#define UNIPHY_PLL_SSC_CFG1		0x050
+#define UNIPHY_PLL_SSC_CFG2		0x054
+#define UNIPHY_PLL_SSC_CFG3		0x058
+#define UNIPHY_PLL_LKDET_CFG0		0x05C
+#define UNIPHY_PLL_LKDET_CFG1		0x060
+#define UNIPHY_PLL_LKDET_CFG2		0x064
+#define UNIPHY_PLL_CAL_CFG0		0x06C
+#define UNIPHY_PLL_CAL_CFG8		0x08C
+#define UNIPHY_PLL_CAL_CFG9		0x090
+#define UNIPHY_PLL_CAL_CFG10		0x094
+#define UNIPHY_PLL_CAL_CFG11		0x098
+#define UNIPHY_PLL_STATUS		0x0C0
+
+#define SATA_PHY_SER_CTRL		0x100
+#define SATA_PHY_TX_DRIV_CTRL0		0x104
+#define SATA_PHY_TX_DRIV_CTRL1		0x108
+#define SATA_PHY_TX_IMCAL0		0x11C
+#define SATA_PHY_TX_IMCAL2		0x124
+#define SATA_PHY_RX_IMCAL0		0x128
+#define SATA_PHY_EQUAL			0x13C
+#define SATA_PHY_OOB_TERM		0x144
+#define SATA_PHY_CDR_CTRL0		0x148
+#define SATA_PHY_CDR_CTRL1		0x14C
+#define SATA_PHY_CDR_CTRL2		0x150
+#define SATA_PHY_CDR_CTRL3		0x154
+#define SATA_PHY_PI_CTRL0		0x168
+#define SATA_PHY_POW_DWN_CTRL0		0x180
+#define SATA_PHY_POW_DWN_CTRL1		0x184
+#define SATA_PHY_TX_DATA_CTRL		0x188
+#define SATA_PHY_ALIGNP			0x1A4
+#define SATA_PHY_TX_IMCAL_STAT		0x1E4
+#define SATA_PHY_RX_IMCAL_STAT		0x1E8
+
+#define UNIPHY_PLL_LOCK		BIT(0)
+#define SATA_PHY_TX_CAL		BIT(0)
+#define SATA_PHY_RX_CAL		BIT(0)
+
+/* default timeout set to 1 sec */
+#define TIMEOUT_MS		10000
+#define DELAY_INTERVAL_US	100
+
+struct qcom_apq8064_sata_phy {
+	void __iomem *mmio;
+	struct clk *cfg_clk;
+	struct device *dev;
+};
+
+/* Helper function to do poll and timeout */
+static int poll_timeout(void __iomem *addr, u32 mask)
+{
+	u32 val;
+
+	return readl_relaxed_poll_timeout(addr, val, (val & mask),
+					DELAY_INTERVAL_US, TIMEOUT_MS * 1000);
+}
+
+static int qcom_apq8064_sata_phy_init(struct phy *generic_phy)
+{
+	struct qcom_apq8064_sata_phy *phy = phy_get_drvdata(generic_phy);
+	void __iomem *base = phy->mmio;
+	int ret = 0;
+
+	/* SATA phy initialization */
+	writel_relaxed(0x01, base + SATA_PHY_SER_CTRL);
+	writel_relaxed(0xB1, base + SATA_PHY_POW_DWN_CTRL0);
+	/* Make sure the power down happens before power up */
+	mb();
+	usleep_range(10, 60);
+
+	writel_relaxed(0x01, base + SATA_PHY_POW_DWN_CTRL0);
+	writel_relaxed(0x3E, base + SATA_PHY_POW_DWN_CTRL1);
+	writel_relaxed(0x01, base + SATA_PHY_RX_IMCAL0);
+	writel_relaxed(0x01, base + SATA_PHY_TX_IMCAL0);
+	writel_relaxed(0x02, base + SATA_PHY_TX_IMCAL2);
+
+	/* Write UNIPHYPLL registers to configure PLL */
+	writel_relaxed(0x04, base + UNIPHY_PLL_REFCLK_CFG);
+	writel_relaxed(0x00, base + UNIPHY_PLL_PWRGEN_CFG);
+
+	writel_relaxed(0x0A, base + UNIPHY_PLL_CAL_CFG0);
+	writel_relaxed(0xF3, base + UNIPHY_PLL_CAL_CFG8);
+	writel_relaxed(0x01, base + UNIPHY_PLL_CAL_CFG9);
+	writel_relaxed(0xED, base + UNIPHY_PLL_CAL_CFG10);
+	writel_relaxed(0x02, base + UNIPHY_PLL_CAL_CFG11);
+
+	writel_relaxed(0x36, base + UNIPHY_PLL_SDM_CFG0);
+	writel_relaxed(0x0D, base + UNIPHY_PLL_SDM_CFG1);
+	writel_relaxed(0xA3, base + UNIPHY_PLL_SDM_CFG2);
+	writel_relaxed(0xF0, base + UNIPHY_PLL_SDM_CFG3);
+	writel_relaxed(0x00, base + UNIPHY_PLL_SDM_CFG4);
+
+	writel_relaxed(0x19, base + UNIPHY_PLL_SSC_CFG0);
+	writel_relaxed(0xE1, base + UNIPHY_PLL_SSC_CFG1);
+	writel_relaxed(0x00, base + UNIPHY_PLL_SSC_CFG2);
+	writel_relaxed(0x11, base + UNIPHY_PLL_SSC_CFG3);
+
+	writel_relaxed(0x04, base + UNIPHY_PLL_LKDET_CFG0);
+	writel_relaxed(0xFF, base + UNIPHY_PLL_LKDET_CFG1);
+
+	writel_relaxed(0x02, base + UNIPHY_PLL_GLB_CFG);
+	/* make sure global config LDO power down happens before power up */
+	mb();
+
+	writel_relaxed(0x03, base + UNIPHY_PLL_GLB_CFG);
+	writel_relaxed(0x05, base + UNIPHY_PLL_LKDET_CFG2);
+
+	/* PLL Lock wait */
+	ret = poll_timeout(base + UNIPHY_PLL_STATUS, UNIPHY_PLL_LOCK);
+	if (ret) {
+		dev_err(phy->dev, "poll timeout UNIPHY_PLL_STATUS\n");
+		return ret;
+	}
+
+	/* TX Calibration */
+	ret = poll_timeout(base + SATA_PHY_TX_IMCAL_STAT, SATA_PHY_TX_CAL);
+	if (ret) {
+		dev_err(phy->dev, "poll timeout SATA_PHY_TX_IMCAL_STAT\n");
+		return ret;
+	}
+
+	/* RX Calibration */
+	ret = poll_timeout(base + SATA_PHY_RX_IMCAL_STAT, SATA_PHY_RX_CAL);
+	if (ret) {
+		dev_err(phy->dev, "poll timeout SATA_PHY_RX_IMCAL_STAT\n");
+		return ret;
+	}
+
+	/* SATA phy calibrated succesfully, power up to functional mode */
+	writel_relaxed(0x3E, base + SATA_PHY_POW_DWN_CTRL1);
+	writel_relaxed(0x01, base + SATA_PHY_RX_IMCAL0);
+	writel_relaxed(0x01, base + SATA_PHY_TX_IMCAL0);
+
+	writel_relaxed(0x00, base + SATA_PHY_POW_DWN_CTRL1);
+	writel_relaxed(0x59, base + SATA_PHY_CDR_CTRL0);
+	writel_relaxed(0x04, base + SATA_PHY_CDR_CTRL1);
+	writel_relaxed(0x00, base + SATA_PHY_CDR_CTRL2);
+	writel_relaxed(0x00, base + SATA_PHY_PI_CTRL0);
+	writel_relaxed(0x00, base + SATA_PHY_CDR_CTRL3);
+	writel_relaxed(0x01, base + SATA_PHY_POW_DWN_CTRL0);
+
+	writel_relaxed(0x11, base + SATA_PHY_TX_DATA_CTRL);
+	writel_relaxed(0x43, base + SATA_PHY_ALIGNP);
+	writel_relaxed(0x04, base + SATA_PHY_OOB_TERM);
+
+	writel_relaxed(0x01, base + SATA_PHY_EQUAL);
+	writel_relaxed(0x09, base + SATA_PHY_TX_DRIV_CTRL0);
+	writel_relaxed(0x09, base + SATA_PHY_TX_DRIV_CTRL1);
+
+	return 0;
+}
+
+static int qcom_apq8064_sata_phy_exit(struct phy *generic_phy)
+{
+	struct qcom_apq8064_sata_phy *phy = phy_get_drvdata(generic_phy);
+	void __iomem *base = phy->mmio;
+
+	/* Power down PHY */
+	writel_relaxed(0xF8, base + SATA_PHY_POW_DWN_CTRL0);
+	writel_relaxed(0xFE, base + SATA_PHY_POW_DWN_CTRL1);
+
+	/* Power down PLL block */
+	writel_relaxed(0x00, base + UNIPHY_PLL_GLB_CFG);
+
+	return 0;
+}
+
+static const struct phy_ops qcom_apq8064_sata_phy_ops = {
+	.init		= qcom_apq8064_sata_phy_init,
+	.exit		= qcom_apq8064_sata_phy_exit,
+	.owner		= THIS_MODULE,
+};
+
+static int qcom_apq8064_sata_phy_probe(struct platform_device *pdev)
+{
+	struct qcom_apq8064_sata_phy *phy;
+	struct device *dev = &pdev->dev;
+	struct phy_provider *phy_provider;
+	struct phy *generic_phy;
+	int ret;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	phy->mmio = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(phy->mmio))
+		return PTR_ERR(phy->mmio);
+
+	generic_phy = devm_phy_create(dev, NULL, &qcom_apq8064_sata_phy_ops);
+	if (IS_ERR(generic_phy)) {
+		dev_err(dev, "%s: failed to create phy\n", __func__);
+		return PTR_ERR(generic_phy);
+	}
+
+	phy->dev = dev;
+	phy_set_drvdata(generic_phy, phy);
+	platform_set_drvdata(pdev, phy);
+
+	phy->cfg_clk = devm_clk_get(dev, "cfg");
+	if (IS_ERR(phy->cfg_clk)) {
+		dev_err(dev, "Failed to get sata cfg clock\n");
+		return PTR_ERR(phy->cfg_clk);
+	}
+
+	ret = clk_prepare_enable(phy->cfg_clk);
+	if (ret)
+		return ret;
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider)) {
+		clk_disable_unprepare(phy->cfg_clk);
+		dev_err(dev, "%s: failed to register phy\n", __func__);
+		return PTR_ERR(phy_provider);
+	}
+
+	return 0;
+}
+
+static int qcom_apq8064_sata_phy_remove(struct platform_device *pdev)
+{
+	struct qcom_apq8064_sata_phy *phy = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(phy->cfg_clk);
+
+	return 0;
+}
+
+static const struct of_device_id qcom_apq8064_sata_phy_of_match[] = {
+	{ .compatible = "qcom,apq8064-sata-phy" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, qcom_apq8064_sata_phy_of_match);
+
+static struct platform_driver qcom_apq8064_sata_phy_driver = {
+	.probe	= qcom_apq8064_sata_phy_probe,
+	.remove	= qcom_apq8064_sata_phy_remove,
+	.driver = {
+		.name	= "qcom-apq8064-sata-phy",
+		.of_match_table	= qcom_apq8064_sata_phy_of_match,
+	}
+};
+module_platform_driver(qcom_apq8064_sata_phy_driver);
+
+MODULE_DESCRIPTION("QCOM apq8064 SATA PHY driver");
+MODULE_LICENSE("GPL v2");